WL-DDG13400\~WL-DDG15700

DEEP BED SAND FILTERS

WL-DDG13400\~WL-DDG15700
WL-BDG10400\~WL-BDG13700

High quality and high performance are aesthetically designed for water treatment.

High density fiberglass sand filters are constructed by the latest engineering technology. The improvement of flow ability provides an ultra-pure water filtration. The fiberglass winding design allows the filter to have extra strength and resistance to chemical and corrosives. They're the most recommendable equipment for the application of water treatment.

WL-DDG13400\~WL-DDG15900

WL-BDG10400\~WL-BDG13700

CONVERTIBLE CARTRIDGE & DIATOMACEOUS EARTH FILTER

UV inhibited filament wound structural fiberglass tanks.

2" or 63mm Inlet/Outlet PVC unions.

Either 6 way Multiport or Push-Pull valve available for DE models.

Easy removal or installation of cartridges or DE elements.

Cartridges in 20.9,23.2, 35.3, 41.8 Sq.m2 sizes, fully convertible toDE.

DE elementsin 3.25, 4.18, 6.97,8.39 Sq.m2.sizes, fully convertible to Cartridges.

Large clear lock ring sealed lid for easy interior viewing and media installation/removal.

Exclusive integral Inlet/Outlet manifold eliminatesconventional bulkhead fittings.

Hose bib drain valve allows removal of tank debris away from mechanical area.

COMMERCIAL HI-RATE SAND FILTERS

Superior engineering and a company-wide commitment to customer satisfaction have produced a series of vertical filters that are built to be tougher, longer lasting and better performing than any other competing vertical commercial hi-rate sand filter.

Constructed of polyester resin and non-corrosive fiberglass filament winding, all internal components and connections are injection molded PVC. UV-resistance surface allows working under sunshine.

Cover Lid

Collector Arms

Pressure Control Manometer Panel

Optional: Sight glass, manhole, nozzle plate.

Sight Glass

Manhole

Nozzle Plate

HORIZONTAL SAND FILTERS

Horizontal sand filters are made of polyester reinforced with fiberglass; they are totally anticorrosive, and have high mechanical, chemical and thermal resistance, higher quality water is achieved with their greater filtering capacity. Indexes of turbidity and contaminants of the filtered water are reduced due to their increased retention capacity, The time between back washes increases proportionally with the height of the filterbed, meaning there are fewer interruptions in filtration, and lower water consumption, because the number of back washes needed isdecreased and there is less erosion of the filtering material.

A horizontal filter is the ideal choice in cases where a great volume of water is to be treated, and in cases which require optimization of the available space, as a single horizontal filter can substitute up to 3 vertical filters of the same diameter simply by increasing its length.

Collector Arms

Top Diffuser

Cover Lid

Sand Drain

Pressure Control Manometer Panel

Φ1400mm

Φ1600mm

DE650-DE700 With Valve

DIATOMACEOUS EARTH FIBREGLASS FILTERS

D.E. is historically the media of choice for the designers of some of the largest and most beautiful pools in the world,it is now more practical for all backyard pools as well. It brings you the proven performance of diatomaceousearth media in the world's safest and easiest-to-operate filter.

The greater cycle times and minimized maintenance of the filter, coupled with superior grid system, gives you the finest D.E.filter available.

Good and crude media for filtration--Diatomaceous(D.E.)

• Hight Filter precision, can reach 2\~ 3μm.

•Shorter time tobackwash, save water and energy sources.

• "Deep bed” designed, save area.

DE800-DE1800 With Flange

Standard: Maximum Working Pressure: 250kpa/36psi/2.5bar

Optional: Maximum Working Pressure: 400kpa/58psi/4.0bar

Maximum Temperature: 50°C

HIGH PRESSURE FIBERGLASS FILTERS

High-performance material satisfies customers'different application

Apply to water feeding and sewage water treatment, chemical electronic, petroleum, food etc.

Φ150mm-Φ900mm filters are made of PE blow molding inner tank with fiberglass.

Φ1000mm-Φ1500mm filters are made of PE rotational molding innertank with fiberglass.

Above Φ700 filters are specially equipped with destruction of negative pressure device.

• Strong ability of pressure-bearing

BIOLOGICAL FILTER

Bead filter are closed pressure filter containing food grade polyethylene granules or beads. The form and size of the beads create a large surface on which bacteria and suspended solid can attached it. It provides mechanical and biological filtration at a single unit which compete with bobbin wound filter, 6-way multiport valve, pipings, circulation pump, air blower, control box and base. It has been engineered uniquely for pond and aquarium.

6-WAY MULTIPORT VALVE

New type of multiport control valve, made of ABS and engineered for maximum flow at lower pressure drops will be the first choice in the same ones. All the valves feature an easy-to-easy lever action handle that lets you "dial" up to six valve/filter func-tions: filter, backwash, waste, rinse, closed or recirculate. Complete with an integral sight glass that lets you see when the backwashing cycle is completed, our wide selection of valve configurations allows you to the proper application: residential and commercial.

1.5" Multiport valve for top mounted clamp lock filter

1.5"Multiport valve for side mounted filter

4-WAY MULTIPORT VALVE

1.5" Multiport valve for top mount filter

BUTTERFLY VALVE FOR COMMERCIAL FILTERS

4-Way Valve Manifold Size: 3"-8"

MULTIPORT VALVES

2"Multiport valve for top mounted filter

2"Multiport valve for side mounted filter

MANIFOLD

DE FILTER TOP MANIFOLD WITH BUILT IN AIR RELIEF VENT

Heavy-duty materials

• Top manifold with built in air relief vent

• Manufactured to the highest standards to provide you with a quality product

• Suitable to use with only one rod

Built-in air relief vent

DE FILTER SPIDER BOTTOM MANIFOLD

Heavy-duty materials

●Manufactured to the highest standards to provide you with a quality product

DKC2021B

CRYSTAL GLASS FILTER MEDIA

Crystal Glass Filter Media, made from virgin material, its advantage over Silica Sand as filter media application are;

Prevents bacterial growth

The aseptic properties CrystalGlass Filter Media avoid the formation of biofilm. This important characteristic is accredited by accreditation laboratories (see attached lab report). Biofilm is responsible for chloramines, clogging and channeling in the filter mass.

Long-lasting

Sand media needs to be changed out every 3-5 years depending on the water and debris load that is going through the filter Crystal Glass Filter Media lasts about 2-3 times as long as sand filter media, it is often referred to as “Permanent Medium”

Improves water clarity

Sand will filter to about30 microns.Cystal Glass Filter Media will filter down to roughly 5-10 microns. Even finer particles than cartridge filters.

Sustainable

Glass media, normally can last for over 10 years plus, subject to use and application; without need for replacement.

Reduces backwashing

Sand will require longer backwashing to clean the dirt out of the system.As there is more volume of media to go through. Glass media will backwash quicker as the material is lighter and less dense, so it floats better, resulting in faster cleaning. Faster cleaning also means less water usage. Usage of Crystal Glass Media will results in less HEAD loss (see Fig 3).

Economical

Sand filter media, generally speaking, to fill the filter more cost effective.

Glass media since it is finer will only require roughly 50-70% fill capacity at a higher cost but with more value.

Fig 1

Fig 2

Test Results Summary (GMICRO report)

• Crystal Glass Filter Media performs at 70% reduction in turbidity and reach below 2NUT after 20 minutes

UNDERWATERLIGHTS

WL-MAG

Colour Change

LASWIM's WL-MAG series of mixed-type (wall-mounted/embedded) underwater lights prioritize engineering convenience, product safety, and reliability. This underwater light demonstrates excellent engineeringadaptability,allowing wall-mounted, embedded, or assembled installation through the conversion of the base. This greatly enhances the universality of underwater light installation, reducing the difficulty for owners to choose. Simultaneously, this underwater light employsa fully sealedprocess and integrated structural design, isolating electrical components from water and the light body. This significantly improves the waterproof, heat dissipation, and insulation performance of the underwater light, resulting in better safety and a longer lifespan.

Main features:

Fully resin enclosing thelight cable connection, to achieve complete waterproof and moisture proof.

• High efficient, supper bright, big lumen.

Waterproof standard: IP68.

Color: cool white, warm white, RGB and single color.

•RGB mode features 19 pre-programmed patterns.

Installation mode: compatible to housing type with niche and wallmounted with bracket plate.

Color temperature: cool white 6000K,warm white: 3000K.

TECHNICAL DATA

LASWIM MD series flat light is elegant in design, ultra-thin lamp againsts to the pool wall much more closely. It not only provides super brightness and high efficiency, but also very convenient installation to mount to the pool with bracket plate directly.

• Code 3040930059 bracket for concrete pool (non-niche).

Code 3040930061 Mounting set for panel pool.

Code 1219800009 retrofit plate for light with European or American Niche.

3040930059

3040930061
1219800009

INSTALLATION DRAWING

RETROFIT PLATE

Universal Retrofit Bracker for Niche Lights,fit for most type of niches all over the world.

Panel pool installation

Concrete pool installation with wall conduit:

WL-ME

LASWIMME light with 2 " thread coupling is compatible to 2 " int.thread wall conduit and pvc pipe. This series light is widely used in different kind pool, spa and water features. Its crystal PC lens improves its corrosion resistance and transparency to a new level.

• Code 3040930063 kits for panel pool installation.

ME light is able to connect to 2 " wall conduit directly.

3040930063

• Code 3040930062 kits for concrete pool with 2" or 63mm pvc pipe.

3040930062

Concrete pool installation to 2"/63mm pipe

TECHNICAL DATA

WL-MF

LASWIM TORCH LED LIGHT

MF series torch led light is with an unique designed and new technology, featuring an innovation, energy efficient and fast cooling. Just need to slip into a standard 1.5” pvc pipe or return fitting, easy and simple operation.

Main features:

• Low wattages but brilliant illumination.

• Low energy consumption.

• Variable voltage range AC12-20V.

No flicker, high purity, soft light, no glare.

Multi-color and white color available.

High brightness (high lumen), strong light transmission.

• IP68 waterproof standard.

Suitable to small space installation, such as pool step, spa, etc.

•Installation mode: Housing type, slip into 1.5”/50mm wall fitting or pvc pipe.

•Color: cool white, warm white, RGB and single color.

INSTALLATION GUIDANCE

Slip into 1.5"/50mm pvc rigid hose or socket, non-thread.

TECHNICAL DATA

WL-MG

With distinctive design lens, MG light performances extraordinary and gorgeous lighting effect. Its thread is compatible to connect to 1.5" and 2" int. thread wall fitting or wall conduit, very convenient and widely used inall kinds of pools and spas, especial different liner pools.

Main features:

High quality silicon gasket, it's not easy to age, seepage and leak.

• Variable voltage range AC 12-20V.

• No flicker, high purity, soft light, no glare.

High brightness (high lumen), strong light transmission.

• Low power consumption, low heat while working.

• IP68 waterproof standard.

Color. cool white, warm white, RGB & single blue.

Selection guidance

7Screw to 1.5" wall fitting directly

3With niche part, the light can be connected to 2"/63mm slippy pvc pipe.

4Adapt to 2" wall fitting special for different liner pools.

Suitable for all kinds of pools

7Concrete pool installation with wall conduit.

2 Concrete pool installation with niche

Concrete pool + liner installation.

4 Fiberglass pool installation.

Panel pool + liner installation

TECHNICAL DATA

WL-PT

PT Underwater Light – a smart, thin wonder designed to bring intelligence and elegance to your underwater space. With a thin profile of just 14mm, this smart lighting solution exudes elegance. Thanks to the epoxy resin filling process, the internal light not only guarantees high water resistance and efficient heat dissipation, but is also compatible with all types of swimming pool installations.

Main features:

Wide beam angle up to 130° to avoid glare.

• Constant current driving mode.

• Supports AC12V/DC12-24V safe low-voltage power supply providing you with stronger selectivity and wider adaptability

• Lifespan: 50,000 hours.

Operating temperature: 0-45°C.

Color rendering index: 80.

• Face ring: ABS/Stainless steel 304.

RGB control method

WL-APLU-DWcontrol system: control panel+remote controller, Wifi 2.4G, 433 MHZ (12V/AC or 12-24V/DC power input).

WL-APLU-DW-PRO controlsystem:Wifi+Appcontrol, you can adjust the brightness, working mode, timing setting, color change through the mobile phone, and the light color changes with the rhythm of the music. (Compatible with Android and iOS systems).

ON/OFF control: (12V/AC power input).

WL-YAQ control: with remote controller(12V/AC power input).

Scan QR to download the APP

Installation method

Wall-mounted with kit.

• Retrofit parts for niche light, fit for European or American niche.

7American light niche (retrofit parts A)

2European light niche (retrofit parts B)

3Wall mounted

5Plugged fitting
43/4"thread part

TECHNICAL DATA

WL-LA

Main features:

Ultra-thin design, perfectly integrated with the pool wall.

Very convenient installation, directly insert into 3 / 4 " pipe or 1 . 5 " water inlet.

Four-core wire stepless dimming remote control technology can achieve hundreds of color changes.

Suitable for all kinds pools using.

TECHNICAL DATA

Features:

WL-LAS

Ultra-thin design, perfectly integrated with the pool wall, only 3mm away from pool wall.

The recessed light housing can be directly embedded into the decorative layer of the pool wall, 25mm only.

Default 9-color mode: It's available towork with normal switch AC12V, Laswim YAQ control system and Applume APLU-DW control system with wifi 2.4G, 433MHz wireless high frequency technology.

Stainless steel 304 light, corrosion resistant, plastic niche.

Safety low voltage: AC12V, or DC12V for customized.

Waterproof standard: IP68.

2 meters cable.

TECHNICAL DATA

Features:

Ultra-thin design, perfectly integrated with the pool wall.

The 3/4" thread allows you to easily install it into different types of pools.

Safety low voltage: 12VAC, DC12-24V.

Color rendering index up to 84, high light efficiency and high light color consistency.

Default 9-color mode: It's available to work with normal switch 12Vac, Laswim YAQ controlsystem and Applume APLU-DW control system with wifi 2.4G, 433MHz wireless high frequency technology.

Plastic face ring and stainless steel face ring are available.

Light beam: 120°.

WL-LB/LBS

The average LED life span exceeds 50,000 hours.

Protection rating: IP68.

3 meters cable.

Operating Temperature: Up to 45°C.

TECHNICAL DATA

WL-QB

QBseries features stainless steel material, non-corrosive and well cooling operation, tempered glass lens increase transparency and compatible to American and European niches. It's very simple to install in concrete pool.

TECHNICAL DATA

WL-QD

Main features:

Material: stainless steel, non-corrosive.

•Tempered glass lens increases transparency.

• High efficient, low heat LED board and control board, low power consumption.

Compatible to American and European niches.

•Different lamp available: LED lamp and E27 bulb.

TECHNICAL DATA

WL-QG

LASWIM QG series light is a high power series light, and features stainless steel material with good heat dissipation and tempered glass lens to increase transparency and super brightness. There are different lamp sources available: variable voltage LED lamp, DIP LED lamp and SMD led lamp.

Compatible to American and European niches.

TECHNICAL DATA

WL-PE-HC / WL-PE-HT

Product Features

Classic Wall-Mounted Design:

Features a proven and reliable wall-mounted structure. It is easy to install without pre-embedding, offering robust construction, long-term durability, and a clean, elegant appearance.

Stainless Steel Body with High-Strength PC Lens:

The light body is made of high-quality stainless steel, ensuringsturdiness and corrosion resistance. Paired with a high-strength polycarbonate (PC) lens, it delivers excellent light transmission properties.

Renewed Underwater Lighting Visuals:

Equipped with new-generation RGB 3-in-1 highefficiency LED chips for synchronized and uniform illumination.

Overall brightness is significantly improved, RGB light efficiency increased by 30%, delivering vivid and saturated colors; white light efficiency increased by 60%, ensuringbright and clear underwater illumination.

Stable and Outstanding Light Performance:

The new light source offers improved stability in luminescence uniformity and color rendition. Color appears purer, significantly enhancingthe overall quality ofunderwaterillumination.

Efficient AC/DC Power Supply for Enhanced Stability (Smart Model):

Supports both AC and DC power input and is compatible with a wide voltage range of 12V-24V. Adopts a constant-current drive design for higher energy efficiency, lower power loss, andmore stable, reliable performance.

Upgraded Smart Control with More Stable Signals (Smart Model):

Compatible with the Applume Plus-Dsmart controller, which uses a wired signal connection between the underwater light and the controller for enhanced signal stability. The smart controller supports Wi-Fi connectivity and works with the Tuya App to enable multiple lighting modes and intelligent control experience.

Flexible Control Solution with Upgrade Compatibility (Standard Model):

Operates on 12V AC power with constant-current drive, and is compatible with previous-generation lighting control boxes and the Applume Plus-S. Supports remote control for turning lights on/off and synchronized underwater lighting control.

When paired with the Applume Plus-S, it enables Wi-Fi connectivity for app and Tuya cloud-based control, timer settings, and scene automation, offering more flexible application and more reliable operation.

Versatile Application:

Suitable for both basic underwater lighting and smart control scenarios, supports synchronized lightingof multiple lamps, and allows flexible selection based on actual needs.

High Protection Rating and Safety Low-Voltage Design:

Meets IP68 protection rating and Class III electrical safety standards, ensuring safe and reliable operation.

WL-PS-HC / WL-PS-HT

Product Features

Plastic Wall-Mounted: Easy to install, suitable for various pool applications.

Enhanced Underwater Lighting Experience: New-generation RGB3-in-1 high-efficiency LEDs with uniform light output. Overall brightness greatly improved—RGB effect +30%, white light +60%, deliveringvivid colors and clear, bright illumination.

Flexible control options, upgrade-friendly (standard version):

Powered by 12VAC with constant-current drive, compatible with previous-generation lighting control boxes and the Applume Plus-S. Supports remote on/off and synchronized underwater lighting control. When paired with the Applume Plus-S, Wi-Fi connectivity and Tuya Cloud control are available, including timer settings and scene automation for flexible and reliable operation.

Efficient AC/DC Power Supply (functional version): Supports AC/DC input with a wide 12V-24V range.

High-Level Production and Safety Low-Voltage: Complies with IP68 protection rating and Class II electrical safety standards, ensuring safe and reliable operation.

Unique Bottom Structure: Ample space for wiring, easy for maintenance.

Stable and Outstanding Light Performance: The new light source delivers more consistent output and better color rendering, with purer colors and enhanced underwater lighting quality.

Upgraded Smart Control with Stable Signals (functional version):

Compatible with the Applume Plus-D smart controller, which uses a wired signal connection between the underwater light and the controller for stable signal transmission. The controller supportsWi-Fi and works with the Tuya App for multiple lighting modes and smart control.

Adaptability to Multiple Scenarios:

Suitable for both basic underwater lighting and smart control applications, supporting multi-light synchronization and flexible model selection.

WL-QJ

Built-in remote control system let you to manage your pool more convenient and easily. (Optional)

Main features:

●Standard PAR56 lamp install into standard PAR56 niche of QJ series underwater light, with high brightness and strong luminosity.

• Curved PC lens expands the light refraction, and the crystal lens brings high brightness.

•Different LED lamps in option.

Compatible with all pools

for liner pool

for concrete pool

Wall Mounted Led Pool Light
Optional abs or stainless steel face plate
corrosion resistance
operating voltage:AC12V
working temperature:-20°C\~+45°℃
lifespan:50000 hours

WL-QJS

For concrete pool

For fiberglas & liner pool

18-Buttons Remote Control

APP

Technical Parameters:

WL-QQC

QQC mode light is an ultra-thin series light with niche for concrete pool installation. Its smooth front plate provides simplicity yet elegant.

Main features:

Material: ABS body+stainless steel base.

Standard cable: 2.0meters.

Waterproof: IP68.

Installation mode: Housing type for concrete pool.

Color: cool white, warm white, RGB and single blue.

RGB mode features 19 pre-programmed lighting patterns.

Color temperature: cool white 6000K, warm white 3000K.

TECHNICAL DATA

WL-QTS

Features:

Ultra-thin design, perfectly integrated with the pool wall, only 3mm away from pool wall.

•The recessed light housing can be directly embedded into the pool wall, 25mm only.

Default 9-colormode: It's available towork with normal switch AC12V, Laswim YAQ control system and Applume APLU-DW control system with wifi 2.4G, 433MHz wireless high frequency technology.

Stainless steel 304 light, cooling fast, corrosion resistant, plastic niche.

Safety low voltage: AC12V

TECHNICAL DATA

Waterproof standard: IP68.

2 meters cable.

WL-BPB

Main features:

Material: anti-UV ABS.

Safety low voltage: AC12V.

Installation mode: wall-mounted type.

Color: cool white, warm white, RGB and single blue.

Color temperature: cool white 6000K, warm white: 3000K.

TECHNICAL DATA

Laswim PA series lights features stainless steel material with gliding and elegant design and good heat radiation. Nicheless flat light directly to mount to pool wall with bracket plate, simple and convenient. PC and tempered glass lens are available to select in this series lights. 75

WL-PA

TECHNICAL DATA

WL-PE

Main features:

•Material: Stainless steel.

• Lens: PC.

Safety low voltge: AC12V.

Installation mode: wall-mounted type.

Color: cool white, warm white, RGB and single blue.

Cable: 2.0meters.

Features:

Wide beam angle 115°-ultra-wide beam angle eliminates shadows for flawless, uniform pool lighting.

Elegant design - the narrow face plate and 240-leds ring-shaped light source are perfectly integrated.

Advanced cooling technology- Keeping the PCB cooler improves efficiency and extends life.

Smart safety- Overvoltage protection + thermal dimming prevents damage from power surges and overheating.

Plastic and stainless steel 2-face plate available to give users more freedom to choose.

RGB lights, free choice of colour, one-click synchronization.

A variety of white color choice: cold white 6500K, daylight white 4000K, warm white 2700K.

Easy installation-12VAC with 2-wire cabling, 12-24VDC with 3-wire cabling, unique communication protocol over the power cable.

With a variety of accessories, it can be used in a variety of different swimming pools

Easy control-YAQ controller and APPLUME controller are compatible, you can also remotely control your lights through APP, freely control control your pool lights.

•Fixed programs

Dimming mode & music rhythm

Color rendering index: 80

TECHNICAL DATA

WL-PQ

Main features:

•Material: ABS face ring+stainless steel base.(It's special made of stainless steel base much better heat radiation for high power lamp than other models.)

• Lamp source: big power led lamp.

• Installation mode: wall-mounted type.

• Color: cool white, warm white, RGB and single blue.

• RGB mode features 19 pre-programmed lighting patterns.

• Color temperature: cool white 6000K, warm white: 3000K.

WL-PSE

WL-PSE

Features:

Wall-mounted, easy to install.

●High brightness, large lumen, strong light transmission.

Safety low voltage: 12VAC, DC12-24V.

White LED light color rendering index of up to 84, high light efficiency and high light color consistency.

Intelligent control: Equipped with Bluetooth wireless connection function, which can be easily used through mobile APP and wireless remote control.

Light beam: 120°.

Protection rating: Ip68.

The average LED life span exceeds 50,000 hours.

Operating Temperature: Up to 45°C.

TECHNICAL DATA

Note:

Default 9-color mode: It's available to work with normal switch 12Vac, Laswim YAQ control system and Applume APLU-DW control system with wifi 2.4G, 433MHz wireless high frequency technology.

Dimming mode: People can use control LED though remote controller or mobile App to switch LED color, brightness, dimming mode and automatic color synchronization

WL-PAR56

Main features:

Standard PAR56 lamp install into standard PAR56 niche.

Curved PC lens expands the light refraction, and the crystal lens brings high brightness.

Different LED lamps in option.

Monochrome and multicolor are available.

RGB and RGBW

Common RGB LED bulbs are made by three colours of red, green and blue and create gradients, blinks and blending modes.

RGBW contains four colors of red, green, blue and white, and expands to milions colours and changing modes to create natural cool white, warm white and infinity other colours

LED PAR56 BULBS

E27 LED LIGHT BULBS

APPLUME PLUS UNDERWATER LIGHTING CONTROLLER

The Laswim Applume Plus Underwater Lighting Controller is a fully intelligent control hub meticulously crafted for high-end aquatic landscapes. With precise signal transmission at its core, it breaks through the limitations of traditional controllers that merely switch power on/off, delivering a truly personalized and remote lighting control experience.

Whether you are creating a private courtyard landscape, upgrading a premium pool, or constructing a commercial-grade water feature project, this controller seamlessly adapts. It not only supports remote control via a mobile APP, allowing you to manage lighting states with one tap whether at home or away, but also enables comprehensive and precise dimming. From warm ambient light to dynamic colorful displays, from romantic gradients to vibrant flashes, customize your exclusive lighting effects at will.

Brightness +

Brightness-

Contrast +

Contrast -

Mode Switch

|On/Off

Network Pairing

Mode

Sync

Power

Network Pairing Indicator

Power Indicator

WL-APLM D

Product Features

• Multi-Mode Smart Control for Full-Scenario Coverage:

Supports three control methods: local control, remote control, and mobile APP (Tuya Smart). Suitable for centralized management in equipment rooms, on-the-spot adjustment by the poolside, and remote smart control, meeting diverse needs from daily use to intelligent scenarios.

• Remote Intelligent Control for On-Demand Lighting Management:

Enables remote on/off switching, linkage control, and status management via the APP, eliminating the need for manual operation beside the device. Paired with independent control signals for precise light driver, it offers faster response and more stable control, ideal for daily management of both residential and commercial pools.

• Full-Range Dimming Capability to Unleash Smart Underwater Light Value: When paired with LASWIM's latest smart underwater light series, the APP supports multi-dimensional adjustments including color and brightness. Custom lighting modes can be created, allowing flexible switching from basic illumination to personalized ambiance.

• Pre-Set Lighting Modes for Efficient One-Tap Activation:

Features multiple built-in, ready-to-use lighting modes that take effect immediately upon selection without complex debugging. Enables quick switching between different lighting effects for daily use, enhancing convenience and consistent experience to easily set the atmosphere.

• AC/DC Wide Voltage Input for Flexible Project Adaptation:

Supports both AC and DC power supply, compatible with a wide voltage input range of 12V\~24V. Employs a constant-current drive design to improve system stability and project adaptability.

• Reliable Protection Design for Pool Application Environments:

Rated IPX4 for splash resistance, capable of handling moisture and splashing conditions in pool equipment rooms and outdoor environments with basic shelter, ensuring long-term stable system operation.

WL-APLM S

Product Features

•Three Control Methods Integrated into One for Versatile Scenarios: The Applume Plus-S supports three control method: the local control panel, remote control, and the smart APP(Tuya Smart). It can be flexibly applied to various usage scenarios: centralized control in the equipment room, on-thespot adjustment by the poolside, and remote management via smartphone. This meets multi-level needs from basic to intelligent control, offeringintuitive and user-friendly operation.

• Multi-Light Synchronization for Unified Lighting Effects:

Supports synchronized on/off switching and lighting effect control for multiple underwater lights with a single tap, eliminating the complexity of operating lights individually. This ensures consistent lighting presentation across the entire pool, allowing for quick creation of complete illumination and ambiance.

• Linked Switch Control for Automatic Operation with Equipment: Upon integration with the Tuya APP, the WL-APLM S supports linked control between underwater lights and other Tuya-compatible devices (such as pumps). This enables synchronized operation where the lights turn on automatically when the linked device starts and turn off when the device stops, providing an intuitive and reliable automated lighting control solution.

• System-Compatible Design Supporting Smooth Upgrades:

As the core lighting control unit, the Applume Plus-S is compatible with standard underwater lights. It allows for integration into existing systems without the need to replace fixtures or modify the original power supply and wiring structure, enabling a smooth upgrade from basic control to centralize, intelligent control.

• Simple and Quick Installation, Suitable for New and Retrofit Projects:

Utilizes a 12V AC or DC12-24V power supply and a constant-current drive control scheme, eliminating the need for complex circuit modifications. With clear wiring logic, deployment can be completed simply by following the installation instructions. It is suitable for both new pool construction projects and upgrades to existing pool control systems.

• Stable Protection Design Adapted to Pool Environments:

Features an IPX4 splash resistance rating, capable of handling common moisture and splashing conditions found in pool equipment rooms and sheItered outdoor environments, ensuringlong-term stable system operation.

App Control Functions

You can also control your underwater lighting through the app for more convenient operation. Please search for "Tuya" on Google Play or the App Store to download the app and enable smart remote control of your underwater lighting.

Lighting Mode Switching/ Brightness Adjustment

You can use the app to achieve stepless adjustment of the light brightness according to your actual needs. Various rich lighting effects, including Color Mode and White Mode, can be easily adjusted via the app.

Timer Settings

You can set the switch-on/off times and duration for the pool lights. Once the set daily schedule is reached, the pool lights will automatically turn on andoff.

Dual-Mode Scenes

Custom Scene: Set the light color, brightness, and pulse/breathing rate according to your personal preference to create dynamic underwater lighting effects tailored to you. Recommended Scene: Directly select from systempreconfiguredscene modes. Optimized lighting effects can be activated quickly without manual parameter configuration.

Circadian Rhythm

You can fully configure and control the Circadian Rhythm mode of the underwater lights through the app, simulating the dynamic patterns of natural light changes.

Product Parameters