CepTHcWKaμNA WRAS μnA BOμOnpOBOAHbIX Tpy6 W3 PVC-U cOOTBeTCTByeT CTaHnapTy BS 6920.

CepTHCpUKauNA WRAS AnA pHTUHrOB BOμOnpOBOHbIX Tpy6 W3 PVC-U cOOTBeTCTByeT CTaHAapTy BS 6920.

CepTHcpWKaLNA CE AnA BOAOnpOBOAHbIX Tpy6 cpWTИHrOB W3 PVC-U cOOTBeTCTByeT CTaHapTaMISO1452-2,ISO1452-3.

Certificateof Compliance

No.0B170531.GLTUC87

Certificate's Holder:

GuangdongLiansuTechnologyIndustrial Co.,Ltd. Liansu Industrial Estate,LongjiangTown,ShundeZone, FoshanCity.GuangdongProvince,China

Certification ECMMark:

Product: Model(s):

PPRPipesandFittings,PEPipesandFittings UPVCPipesandFitfings,CPVCPipesandFittings

Verification to:

Standard:
ENISO15874-1:2013,ENISO15874-2:2013
ENISO15874-3:2013,EN12201-1:2011,
EN12201-2:2011+A1:2013.EN12201-3:2011+A1:2012. ENISO1452-1:2009.ENISO1452-2:2009
ENISO1452-3:2010.ENISO15877-1:2009+A1:2010 ENISO15877-2:2009+A1:2010,
ENISO15877-3:2009+A1:2010
related to CEDirective(s):
R305/2011(RegulationfortheMarketingof Construction
Products)

Remark:Theproducts）hasbeenverifedonavoluntarybasis.Theproduct(s}safisfiestherequirementsf theCerificafionMarkfECMinreferencetothaboveistedStandards}TheaboveComplianceMark canbe affixedon the producls}accordinglytothe ECMreguiationaboutisrelease andisuse.The regulationcanbefoundatwww.entecerma.iThisCerlificateofCompliancecanbecheckedforvalidity atwww.entecemo.jt

This verificafion doesn'timply assessment of fhe productionof the product[s)

Additionalinformation,clarilicationabout heCEMarking:

We attest that a TCF for the CE Marking process is in place.Whereas the ManufacturerisResponsible to startheCEMarkingCertificationProcedure through an appointedNofifiedBody andfhe perlorm allthe necessary activities,asrequired by theDirectiveandacceptedbytheNotified Body,betoreplacing theCEMarkon the product(s).

CE

CepTHcpUKaLMA CUPC AnA BOμOnpOBOμHbIX TPy6 w cpUTHHrOB M3 PVC cOOTBeTCTByeT CTaHAapTaM ASTM D 2466, CSA B137.3.

IAPMORESEARCHANDTESTING,INC.

5001EastPhiladelphiaStreetOntario,Calomia91761-2816(9094724100Fax9094724244www.apm.rg

CERTIFICATEOFLISTING

AORff ciqnih ut hd acceptance by Authorities Having Jurisdiction.

The most updated information on thin Certificate of Listing is available online at pld,iapmo.org

Effective Date: December 2014

Void After:December 2015

File No. 7531

Identification: Fittings shall be marked permanently and legibly with manufacturer's name or trademark,material designation （PVc I for PVC 12454-B,PVC 12 for PVC 12454-C,PVC 13 for PVC 13354-C and 11443-B,and PVC II for PVC 14333-D), size,"D2466,",\*B137.3" and the cUpc certification mark.Fittings intended for contact with potable water shall bear the mark or the seal of the laboratory making the evaluation for potable water contact as well as the wordpotable"or the designation "Por “pw".Note:Where the size of the fitting does not allow complete marking,omit identification marking in the following sequence:size,material designation,manufacturer's name or trademark.Where recessed marking is used, care shall be taken to see that in no case marking causes cracks or reduces the wall thickness below the minimum specified.

Characteristics: Poly vinyl chloride (Pvc) schedule 40 pipe fittings for use only with the distribution of pressurized liquids,which are chemically compatible with the piping materials.Note:Due to inherent hazards

Th fhd llnibdan Prdfd Anyalerationofhscertificate ould be groudsforvocatonf thelisting.

LESSO

LESSO GROUP (ИPXEBOV KOL: 2128.HK)

GUANGDONGLIANSUTECHNOLOGYINDUSTRIALCO.,LTD.

pON3BOACTBeHHa8 6a3a:MpOMbIWneHHbi KOMnneKC AHCy, rOpOn yHU3AH, paOH lyHbAe,rOpO ΦoWaHb, npOBWHuNA 「yaHAyH, 528318, KHTa

Ten.no nponaxaM:(86) 757 23379211 ΦaKc:(86) 757 23378980 3n.nouTa: oversea@lesso.com A3W8-1: (86) 757-29223015 AcppWka-1:(86) 757-29226356 CpeAHWv BoCTOK:(86)757-29226355 A3V8-2:(86) 757-29220500 AcppWka-2:(86) 757-23379211 OxHagAMepMKa:(86)757-29220501

www.lesso.com

Alibaba