安全标志编号：KEE220018

矿用产品安全标志证书

持证人：漯河利通液压科技股份有限公司

注册地址：河南省漯河经济开发区民营工业园

生产单位：漯河利通液压科技股份有限公司

生产地址：河南省漯河经济开发区民营工业园

产品名称：四层钢丝缠绕中压液压支架软管

规格型号：4SP-63、76

产品标准及技术条件： GB/T 10544-2013 MT/T 98-2006 Q/LT-04-2022

适用范围：严格按《金属非金属矿山安全规程》有关规定使用。

发证日期：2022年11月07日

有效期至：2027年11月05日

备注：

上述产品经履行安全标志审核发放实施规则ABGZ-MA-EEI-2017-01规定的合格评定程序，符合有关要求，特发此证。本证书的有效性需通过持证后监督获得保持，相关信息及主要零元部件等信息可通过网络查询可登陆www.aqbz.org或扫描本证书二维码查询。

签发人：朱风山

发证部门：

矿用产品安全标志证书

持证人：漯河利通液压科技股份有限公司

注册地址：河南省漯河经济开发区民营工业园

生产单位：漯河利通液压科技股份有限公司

生产地址：河南省漯河经济开发区民营工业园

产品名称：矿用喷浆橡胶软管

规格型号：XJKJ-1.5/57

产品标准及技术条件：HG/T 2490-2011 MT/T 191-1989 Q/LT-03-2022

适用范围：严格按《金属非金属矿山安全规程》有关规定使用。

发证日期：2022年09月20日

有效期至：2027年09月18日

备注：

上述产品经履行安全标志审核发放实施规则ABGZ-MA-IEA-2017-01规定的合格评定程序，符合有关要求，特发此证。本证书的有效性需通过持证后监督获得保持，相关信息及主要零元部件等信息可通过网络查询可登陆www.aqbz.org或扫描本证书二维码查询。

签发人：朱同山

发证部门：

安全标志编号：MIE220403

矿用产品安全标志证书

持证人：漯河利通液压科技股份有限公司

注册地址：河南省漯河经济开发区民营工业园

生产单位：漯河利通液压科技股份有限公司

生产地址：河南省漯河经济开发区民营工业园

产品名称：煤矿用喷浆橡胶软管

规格型号：XJKJ-1.5/57

产品标准及技术条件：HG/T 2490-2011 MT/T 191-1989 Q/LT-03-2022

适用范围：严格按煤矿安全有关规定使用。

发证日期：2022年09月20日

有效期至：2027年09月19日

备注：

上述产品经履行安全标志审核发放实施规则ABGZ-MA-IEA-2017-01规定的合格评定程序，符合有关要求，特发此证。本证书的有效性需通过持证后监督获得保持，相关信息及主要零元部件等信息可通过网络查询可登陆www.aqbz.org或扫描本证书二维码查询。

签发人：朱国山

发证部门：

1. Description of Test BOP Control Hose (Ref. to drawing No. BOP Hose 3/4" 5000PSI/ Date 10.23,2019)

劳氏防火检测报告(API16D)

This certificate is issued to Luohe Letone Hydraulics Technology Co., Ltd. at their request the undersigned surveyor did attend at No. 242, Beihai Street, Dadong District, Shenyang City, P.R. China for the purpose of witnessing the fire test in accordance with API Specification 16D Third Edition, November 2018.

2. Other Qualification

This test certificate is based on the test procedure of section 14.6.2 of the API Specification 16D Third Edition, November 2018, Test details refer to test Report No. 2019B203 dated 2019.12.2.

Lloyd's Register Group Lmited, it affiliates and subsidiaries and their respectve officers, employees ar agents are individually and collectively, referred to in ths cdause as Lyd's Reiter Loyd's Regiter asums no resonsblity and shal not be lale to ay person or an oss, damage o epense causedby reliance on the iomtion advice in s doument or howsoer provided ues th person has siged a contract wit te calvant Lod's Regstr eity for te provsion o ts inoation or advice and in that case any responsbility ar lablity is eacusvely on the tems and conditions set outin that contract

This certificate is issued to Luohe Letone Hydiraulics Technology Co., Ltd. at their request the undersigned surveyor did attend at No. 242, Beihai Street, Dadong District, Shenyang City, P.R, China for the purpose of witnessing the fire test in accordance with API Specification 16D Third Edition, November 2018.

2. Other Qualification

This test certificate is based on the test procedure of section 14.6.2 of the API Specification 16D Third Edition, November 2018, Test details refer to test Report No. 20198204 dated 2019.12.2.

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in thes clause as Uloyd's Register'. Lloyd's Register asumes no responsibility and shall not be liable to any persom for any loss, damage or expense caused by reliance on the infiormation or advice in this document or howsoever provided, unless that person has sigred a contract with the relevant Uloyd's Registar antity for the provision of this anformation or advice and in that case any responsibility or liability is esclusively on the terins and conditions set out in that contract.

2. Other Qualification

2. Other Qualifcartion

2. Other Qulification

俄罗斯GOST认证

P

No POCC CN.HA33.H00615

15.01.2019

π0 14.01.2022

No 0420538

. ..1133

" ". : 107076, , , . , . 19, . 2, 128, : 127018, , , . 3-, . 40, 1, 11, 501, : 4953357979, : @.. ..11, 15.02.2018

P : 7K, 16C, 16D. T : LE. C

KOA OK

COOTBETCTBYET TPEOBAHAM HOPMATBHIX AOKYMEHTOB

4009210000

L L D LOG .,L. eatenbhoctu: No.88 Dongfanghong Road, Private Industrial Park, Economy Development Area, Luohe city, Henan Province,China, Kuta

L L DRIS OLOG O.,D.. eatenbhoctu: No.88 Dongfanghong Road, Private Industrial Park, Economy Development Area, Luohe city, Henan Province,China, Kuta

A OHO

04696-/01-2019 15.01.2019. "" .. POCC RU.31112.0023

O

( )

3cn

. . ,

.. ,

美国MSHA认证

U.S. Department of Labor

Mine Safety and Health Administration Approval and Certification Center 765 Technology Drive Triadelphia, West Virginia 26059

October 6,2014

In Reply Refer To: MSHA:A&CC:PAR 105087 Record File No.IC-306

Mr. Yong Zhang
Luohe Letone Hydraulics Technology Co., Ltd.
Private Industrial Park, Economy Development Area Luohe City, Henan Province
CHINA

Dear Mr. Yong Zhang:

MSHA completed the review of an application from the Luohe Letone Hydraulics Technology Co., Ltd. The application requested evaluation of hydraulic hose cover. The application was dated April 8,2014, and carried Company Code No. 9701.

This construction and the information provided meet the requirements of the Standard Application Procedures for Acceptance of Flame-Resistant Solid Products Taken into Mines.

The following requirements apply to this acceptance:

1. Acceptance Marking No. "MSHA IC-306” must be permanently marked on the product with letters at least 1/4” high and at intervals not exceeding 3 feet.Other types of permanent markings may be used with prior approval of MSHA.

2. The nominal, accepted material thickness is 0.3 cm.

3. You are obligated, as the manufacturer. to maintain the quality of the product to assure the requirements of this acceptance are being met.

4. Any change in product composition or in any other factors that may affect this acceptance must not be made without prior authorization from MSHA.

5. We have the right to revoke this acceptance for cause at any time.

6. We must be notified of any transfer of production or ownership of this product.

7. The material is accepted as cover for hydraulic hose.

An invoice for the cost of processing this action will be forthcoming.

莱茵检测报告

CERTIFICATE of Conformity

Registration No.: AK 50342132 0001

Report No.: 17707161 001

Holder: Luohe Letone Hydraulics Technology Co.,Ltd PRIVATE INDUSTRIAL PARK ECONOMY DEVELOPMENT AREA LUOHE CITY, HENAN 462000 P.R. China

Product: Hose (Rubber hoses for measured fuel dispensing systems)

Identification: Type Designation: Type 1 Sample No. : WL2016-04-173 Remark: Refer to test report 17707161 001 for details.

Tested acc. to: EN 1360:2013

The certificate of conformity refers to the above mentioned product. This is to certify that the specimen is in conformity with the assessment requirement mentioned above. This certificate does not imply assessment of the production of the product and does not permit the use of a TUV Rheinland mark of conformity.

Date 06.05.2016

TÜV Rheinland LGA Products GmbH - Tillystraße 2 - 90431 Nürnberg

CE认证

Form QAT\_10-M05, version 02, effective since October 07th, 2022

VERIFICATION

No. 3J240628.LLHTO15

Verification's Holder:

Luohe Letone Hydraulics Technology Co.,Ltd. Private Industrial Park, Economy Development Area, Luohe City, Henan Province, China

Verification ECM Mark:

Product: Rubber hoses and hose assemblies Model(s): 1ST, 2ST, 1SN, 2SN, 4SP, 4SH, R12, R13, 1SC, 2SC

Verification to: Standard: EN 853:2015, EN 856+AC-2019, EN 857:2015, EN 12115-2021

related to CE Directive(s): 2014/68/EU (Pressure Equipment)

This document has been issued in accordance with the European Commission's note of 14 September 2022 ref. Ares (2022) 6342894 concerning voluntary certifications with non-notified procedure and for products intended for third countries outside the EU market.

The manufacturer has voluntarily decided to submit its documents concerning the above-mentioned product for verification. Ente Certificazione Macchine confirms that the documentation made available and immediately returned to it, as containing sensitive data, meets the essential requirements of the above-mentioned directives. The verification activity carried out exclusively concerned the technical documentation and no verification was carried out on the product. This document cannot replace the EC Declaration of Conformity. The above conformity mark can be affixed to the technical documentation in accordance with the ECM regulation on its issue and use, published on the website www.entecerma.it

Issuance date: 28 June 2024

Expiry date: 27 June 2029

For online check:

Approver Ente Certificazione Macchine Legal Representative Luca Bedonni

成为高质量的价值创造者有温度的幸福缔造者