| Standard Configuration | |||
| Positioning & Location Interface | |||
| Technology | GPS, BDS, LBS | LED indication | Power (green) |
| Accuracy | SIM | Nano-SIM | |
| Tracking sensitivity | -165dBm | Memorycapacity | 1000 GPS data entries |
| Acquisition sensitivity | -148dBm | Tamper proof | Light sensor |
| TTFF (open sky) | Avg. hot start ≤1sec;Avg.cold start ≤32sec | USB | N/A |
| GNSS antenna | Internal | ||
| Cellular | Bluetooth antenna | Internal | |
| Technology | LTE Cat 1,GSM | Feature | |
| LL705(E) LTE-FDD: B1/B3/B5/B7/B8/B20/B28 | Voice monitoring range N/A | ||
| LTE-TDD: B38/B40/B41 | Sensors | Accelerometer Light sensor | |
| Frequency | GSM:B2/B3/B5/B8 | Scenarios | Lowbatteryalert,Tamperalert,Vibratingalert, |
| LL705(GL) | Bluetooth | Geo-fence entry&exit alert | |
| LTE-FDD:B1/B2/B3/B4/B5/B7/B8/B12/B17/B18 | RFID | BLE4.2 N/A | |
| /B19/B20/B25/B26/B28/B66 | Mount method | ||
| LTE-TDD: B38/B40/B41 | Configuration support | Livestock collars magnet or screws | |
| GSM:B2/B3/B5/B8 | Certification | SMS, Online command,App | |
| Power | CE | ||
| Operating environment | |||
| Battery | 18.000mAh Li-SOCl2 battery string | Operating temperature -20℃ to +60℃ | |
| (disposable) | Operating humidity | 5% to 95%, non-condensing | |
| Working modes | Mode 1: Tracking mode Mode 2: Timing mode | IP rating | IP67 |
| Mode3:Alarm-basedmode | |||
| Mode4: Time period mode | Physical specification | ||
| Battery life | 8 days to 10 years | Dimensions | 120.0× 68.0× 43.5mm |
| Weight | 289.0g | ||
| Standard Packing |
| 1 |
| LL705 unit Screwdriver |
| OptionalConfiguration* |
| Bluetoothsensor K7800 environmentalsensor |
| *Optional Configuration required to be customized or purchased separately. |
VL502 (A) LTE OBDII GNSS Tracker
The VL502 (A) is a new generation of 4G Cat M1 OBDll tracker forcorporate cars, usage-basedinsurance, fleet management, and individual cars,which can obtain vehicle data such as ViN code,engine speed,water temperature, accumulated mileage,etc.With the UBl-based algorithm for driving behavior analysis. the VL502 (A)can accurately analyzeanyof 4kinds of dangerous driving behavior and support the al-round monitoring of vehicles' real-time status.
Usage-based Insurance
4G
LTECatM1Network
Stable communication via loT-specific 4G LTE network.
On-Board Diagnostics
Obtain real data of vehicle (accurate mileage, fault code, ACC status, fuel consumption statistics battery voltage, engine speed,etc.)
回
GPS& BDS Positioning
Two complementary positioning systems ensure the locations tobeaccuratelydisplayedoncloud platform.
日
Driving Behavior Analysis (Basic)
Receive alerts when any of 4 kinds of dangerous drivingbehavior isdetected.
MultipleAlerts
Instant alerts for atypical events such as car fault, overspeed,ignitiondetectioncollision geo-fence entry/exit, etc.
Effortless Installation
Simply plug this device into the OBDll socket,you don't have to turn to professionals.
| Standard Configuration | |||
| Positioning& Location | Interface | ||
| Technology | GPS, GLONASS BDS, AGPS, LBS | LED indication | Red (Power), Blue (GNSS),Green (CATM) |
| Accuracy | SIM | Nano-SIM | |
| Tracking sensitivity | -162 dBm | Digital I/Os | N/A |
| Acquisition sensitivity | -148 dBm (cold); -156 dBm (hot) | Analog I/Os | N/A |
| TTFF (open sky) | Avg. hot start ≤1sec; Avg.cold start ≤32sec | Voltage detection | 0-36V (±0.3V) |
| Cellular | Memory capacity | 4000 GPS data entries | |
| USB | Micro-USB | ||
| Technology | LTE Cat M1& NB2 | GNSS antenna | Internal |
| Frequency | Cat M1: B2/B4/B5/B12/B13 | Bluetooth antenna | Internal |
| Cat NB2: B2/B4/B5/B12/B13 | Serial ports N/A | ||
| OBD Port | Feature | ||
| Connection | OBDII port | Voice monitoring range | N/A |
| Data | K-Line, CAN Bus | Sensors | Accelerometer |
| ISO 9141-2 (5 baud init,10.4 kbaud) | Vehicle movement alert, Ignitiondetection | ||
| ISO 14230-4 KWP (5 baud init,10.4 kbaud) | Scenarios | Speeding Collision, Geo-fence entry/exit, | |
| ISO 14230-4 KWP (fast init,10.4 kbaud) | Vehicle battery detection, Power supply | ||
| ISO 15765-4 CAN (11 bit ID,250 kbaud) | disconnection | ||
| OBD protocols | ISO 15765-4 CAN (11 bit ID, 500 kbaud) | Driving behavior | Harsh acceleration, Harsh braking |
| ISO 15765-4 CAN (29 bit ID,250 kbaud) | analysis (DBA) | Harsh cornering Collision | |
| ISO 15765-4 CAN (29 bit ID,500 kbaud) | Bluetooth | BLE 4.2 | |
| SAE J1939 CAN(29 bit ID, 250 kbaud) | Configuration support | SMS,Tracksolid ProPCTools | |
| SAE J1939 CAN(29 bit ID, 500 kbaud) | Certification | FCC | |
| Power | Operating environment | ||
| Battery | 180mAh/3.7V | Operating temperature | -20℃ to +70℃ |
| Input voltage | 9-36VDC | Operating humidity | 5% to 95%, non-condensing |
| Power consumption | Standby:≤5mA | IP rating | N/A |
| Physical specification | |||
| Dimensions | 65.0× 50.0×25.0mm | ||
| Weight | 65g | ||
| Optional Configuration* | |||
Inertial Measurement Unit (IMU)
VL533 Electronic Logging Device
The VL533 features a plug-and-play design and supports CAN data reading with SAE J1939,J1587,and EOBD protocols. It meets ELD data transmission requirements and provides \mathsf { B } { + } , GND,and ACC for peripherals (such as DVRs trackers,etc.),while also delivering CAN data through aserial port.Multiple I/Os and external sensor connectionsare supported,offering flexible integration options.
CAN Diagnostics
Reads CAN data for commercial vehicle, supporting J1939, J1587,and EOBD protocols.
回
Multiple Positioning
Features a built-in positioning module with ahigh-gain ceramic antenna.
园
ELD
Supports functional requirements of North American ELD devices.
4G
4G Connectivity
4GCat1communicationensures reliable and fastdata transmission.
Firmware Upgrade Supports FOTA and local firmware updates.
Comprehensive Interfaces
SupportsRS485,1-Wire,and UARTconnections featuresmultiple I/Os,and provides power supply and precise ACC signals for external peripherals
| StandardConfiguration | |||
| Positioning&Location | Interface | ||
| Technology Accuracy | GPS,BDS,AGPS,LBS | LED indication | Green (GNSS)、Blue (4G)、Yellow (OBD)、 White (Bluetooth) |
| Tracking sensitivity | Connection | OBDIll and J1939 9P to 12P(Molex 3.0,2*6 Pin) | |
| Acquisition sensitivity TTFF (open sky) | -148 dBm(cold): -156 dBm(hot) | OBD Protocols Output port | ISO 9141,ISO 14230,ISO 15765,SAE J1939,SAE J1708 |
| Avg. hot start ≤ 1sec; Avg.cold start ≤32sec | 10-Pin (Molex 3.0,2*5 Pin) 8-Pin (Molex 3.0,2*4 Pin)" | ||
| Cellular | SIM USB | Nano-SIM | |
| Technology 4G Cat.1,2G | Digital I/Os | Type-C DOUT *2(Open-drain),DIN *1(3-33V) | |
| VL533(NA): | Analog I/Os | AIN *1(0-33V) | |
| Frequency | LTE-FDD: B2/B4/B5/B12/B13/B66 | Speaker | External, supports audio file playback |
| VL533(EU): | Serial Ports | RS485,UART1-Wire | |
| LTE-FDD: B1/B3/B5/B7/B8/B20/B28 | Bluetooth antenna | Internal, FPC antenna (2.4G) | |
| LTE-TDD:B38/B40/B41 | 4G antenna | Internal,FPC antena | |
| GSM: B2/B3/B5/B8 VL533(LA): Memory | GNSS antenna | Internal, ceramic antenna (25x25x4 mm) | |
| LTE-FDD: B2/B3/B4/B5/B7/B8/B28/B66 GSM: B2/B3/B5/B8 | Interface | 16MB Nor Flash | |
| Power | Sensors | Accelerometer | |
| Trouble Code,Over-Speed, Engine Start, Ignition | |||
| Battery | 270mAH3.7V | Events | OFF, Collsion, Device Plug-in Device Plug-out, High |
| Input voltage | 9-33VDC | water temperature, Overrun idling time, Low voltage | |
| Output voltage1 | 9-33VDC.3A | Driving behavior | Sudden acceleration, Hard braking Sharp tum |
| Output voltage2 | 5VDC0.3A | analysis (DBA) | |
| Power consumption | Standby: | Bluetooth | BLE5.0 |
| Operating environment | Certification | ConfigurationsupportSMS,Tracksolid ProPCTools IOTLAB FCC.CE | |
| Operating temperature-20C~+70℃ Operating humidity 5%~95%(non-condensing) | |||
| Dimensions | 113×66×26mm |
| Weight | 115g |
Optional Configuration\*
N/A
KD032 Electronic Logging Device
The KDo32 features a compact design and is plug-and-play. It supports CAN data reading for SAE J1939, J1587,and EOBD protocols.Additionally it supports Bluetooth connectivity for transmitting ELD device data and can provide \mathsf { B } { + } , GND,and ACCto peripherals (such as DVRs and trackers),aswell as CAN data via a serial port.
Logistics Service
CAN Diagnostics
Readsvehicle CAN data,supporting J1939, J1587, and EOBD protocols.
回
GPS Positioning
Features a built-in positioning module with a high-gain ceramic antenna.
园
ELD
Supports functional requirements of North American ELD devices.
Firmware Upgrade Supports FOTA and local serial port upgrades.
Power Supply and ACC
Provides power and precise ACC signals for peripherals (such as DVRs and trackers),simplifying peripheral installation.
| Standard Configuration | |||
| Power | Interface | ||
| Input voltage | 9-33VDC | LED indication | 3LEDs: Blue (Bluetooth), Green (GNsS), Orange (OBD) |
| Output voltagel | 9-33VDC,3A | Connection | OBDIl and J1939 9P to 10P Molex-3.0 connector |
| Output voltage2 | 5VDC,0.3A | Output port | 10-Pin (PH3.0,2*5-Pin) |
| Working modes | Working Mode (Ignition On) | Bluetooth antenna | PCBonboardantenna |
| Sleep Mode (lgnition Off) | GNSS antenna | ceramic antenna (25*25*4mm) | |
| Feature | Operating environment | ||
| GNSS Mount method | GPS,BDS Plug-and-Play | Operating temperature-20℃ to +85℃ Operating humidity 5%~95% (Non-condensing) | |
| Bluetooth | BLE5.1 | ||
| Memorycapacity | 16MB Nor Flash | Physical specification | |
| Certification (pending) | FCC | Dimensions (LxWxH) 70x50x20mm | |
| Weight 60g | |||
| Standard Packing |
| KD032 unit |
| Main cable |
Optional Configuration\*
3D/6D sensor
AdapterCable
Optional Configuration required to be customized or purchased separately.
VL501 LTEVehicleTerminal
The VL501 is a plug-and-play tracker with GNSS, LTE,and Bluetooth connectivity. With a cigar lighter power connector it is easy to install on virtually any vehicle. It is an ideal choice forindividuals as well as fleet managers who would like to track their vehicles in applications such as courier delivery car rental and leasing insurance telematics (UBl),and more. The considerate design of the USB-A and Type-C ports make the charge ofother devices like celphonemuch more convenient; while the OTA makes firmware upgrade easier.
Usage-based Insurance
山
Plug and Play
Easyto install via thecigarette lighter powerconnector.
日
Driving Behavior Analysis (Basic)
Receive alerts when any of 4kinds of dangerous driving behavior isdetected.
\~D
Remote Listen-in (NA only)
Inconspicuousmicallowsforremoteaudio monitoringoftheenvironment aroundthedevice.
Fast Charging Design
Fast charge other devices via the USB or Type-C port usingadvanced technologies or protocols.
D SOS
Panic Button
Contact dispatch or emergency support with a discreet,in-cabin sOs button.
MultipleAlerts
Alert drivers on the very first position fix,speeding driver fatigue,or entering or leaving a geofence via a buzzer
| Standard Configuration | |||
| Positioning & Location | Interface | ||
| Technology | GPS, GLONASS, BDS,AGPS | LED indication | Power (Red); SOS (Blue) |
| Accuracy | SIM | Nano-SIM | |
| Tracking sensitivity | -165dBm | Digital I/Os | N/A |
| Acquisition sensitivity TTFF (open sky) | -148 dBm (cold)/-157 dBm (hot) | Analog I/Os | N/A |
| Cellular | Avg.hot start ≤1sec:Avg.cold start ≤32sec | Memory capacity | 1000 GPS data entries 1*USB-A (for quick charge) |
| USB | 1*Type-C (for quick charge, upgrade, | ||
| Technology | 4G Cat 1,LTE M1& NB2 VL501-N: | GNSS antenna | and debugging) Internal |
| Frequency | LTE-FDD (Cat 1): B2/B4/B5/B12/B13 VL501-J: | Bluetooth antenna Serial ports | Internal |
| LTE-FDD (Cat M1& NB2): B1/B3/B8/B18/B19/B26 | N/A | ||
| Power | Feature | ||
| Battery | 50 mAh/3.7V | Voice monitoring range ≤5meters | |
| Input voltage | 9-36VDC | Sensors | Accelerometer and gyroscope |
| Power consumption | Sleep: typ.≤12V/15mA | Microphone | Internal |
| GPS and cell enabled: typ. ≤12V/120mA | Firmware update | OTA | |
| Operating environment | Bluetooth Certification | Collision alert, Low external power alert, Vibrating alert, Unplug alert, Installation alert, | |
| Operating temperature -20℃ to +70℃ | Scenarios | Speeding alert, Fatigue driving alert, | |
| Operating humidity | 5% to 95%, non-condensing | Geo-fence entry/exit alert | |
| IP rating N/A | |||
| BLE4.0 Configuration support SMS,Tracksolid ProPCTools | |||
Optional Configuration\*
PERSONAL TRACKERS
QbitM LTEPortable GNSSTracker
Small volume,compact structure,the Qbit M isan advanced portable tracker designed to handle the personal security of the elderlychildren and vulnerable people.With LTE-M communication and GNsS positioning technology the device ensures a solid connection and accurate positioning in almost all cases.Furthermore, variousaccessories,asafety fenceand asound alarmwill add to the security and peace-of-mind provided by the Qbit M.
Personal Safety
Pet Tracking
Package Tracking
日
Intelligent Positioning
With GNsS and cellular positioning (optional) for indoor &outdoor signal coverage,the device can send notifications and upload locations based onmoving states.
④
Time-Phased Working
Support setting the device's working hours and sleeping hoursondemand.
品
Compact Size
Small and light,yet with a long standby time, the device is easy to carry.
Panic Button
Pressthedevice'spanic buttontosendanimmediate alert and real-time location for emergency help or rescue.
Sound Alarm
Make the device sound an alarm through the APP command to find the specific vehicle or person.
Safety Fence
Geofencing (connected to WiFi hotspots),used with real-time locationservicescannotifyusersvia the APP if adevice leaves a designated area.
| Standard Configuration | |||
| Positioning& Location | Interface | ||
| Technology GPS, QZSS (nRF*) | LED indication | Tri-color LED for powet cellular and GNSS | |
| Accuracy | SIM | Nano-SIM (or soft SIM) | |
| Tracking sensitivity -155dBm | Memorycapacity | 100 GPS data entries | |
| Acquisition sensitivity -147dBm | Button | 1*functional button; 1*panic button | |
| TTFF (open sky) Avg.hot start ≤1sec;Avg.cold start ≤36sec | USB | Type-C (for charging) | |
| Cellular | GNSS antenna | Internal | |
| Bluetooth antenna | Internal | ||
| Technology LTE-M Cat M1,Cat NB1,NB2 Cat M1:B1/B2/B3/B4/B5/B8/B12/B13/B14/ | Serial ports | N/A | |
| B18/B19/B20/B25/B26/B28/B66 Frequency Cat NB1& NB2:B1/B2/B3/B4/B5/B8/B12/B13/ B17/B19/B20/B25/B26/B28/B66 | Feature | ||
| Power | |||
| Battery | 650mAh/3.8V industrial-grade Li-Polymer battery (rechargeable) | Sensors Scenarios | Accelerometer Safety fence exit alert, Buzzer alert, |
| Working modes | Intelligentmode Regular GPS mode | Mount method | Low battery alert |
| Battery life | Up to 7 days in intelligent mode, | Bluetooth | Lanyard, back clip BLE5.0 |
| 2 hours moving per day (update every 180s) | Configuration support Certification | Bluetooth CE, FCC,PTCRB | |
| Physicalspecification | |||
| Operatingenvironment | Dimensions 40.0×45.0×15.0mm | ||
| Operating temperature -20C to +70 ℃ Operating humidity 5% to 95%, non-condensing | Weight 30.5g | ||
| IP rating IP65 | |||




