该页无缩略图
Cold Room Panel Standard
Cold Room Panel Standard
-Cold room panels can be selected with different thicknesses according to the insulation requirements and locations used.
-Usually, there are 4 thickness specifications of cold room panels, and the height and width of cold room panels are customized by the customer.
-Customized to site size or customer-specific requirements.
Size Standard Contrast As Follows
| NO. | Surface material | material thickness(mm) | The thickness of the product(mm) | |||
| 50 | 60 | 70 100 | 150 | |||
| 1 | Painted galvanized steel | 0.326、0.376、0.426.0.476、0.5、0.7、0.8 | □ | □ | □ □ | □ |
| 2 | Stainless steel | 0.5、0.6、0.8-1.5 | □ | □ | □ □ | □ |
| 3 | Stucco embossed aluminium | 0.6、0.8 | □ | □ | □ □ | □ |
| 4 | PVF steel | 0.6、0.8 | □ | □ | □ □ | □ |
| 5 | Written plank combination | Customer choice | □ | □ | □ □ | □ |
| 6 | Pu panel | --- | □ | □ | □ □ | □ |
Using The Selection Criteria
| NO. | Panels thinckness | Temetweaturesdifference outside cold room | Applicable temperature range | Base height | lenTh of the roof | Remark |
| 1 | 50 | 30 | High temperature (5C or above) | ≤3000 | ≤2300 | Under special circumstances, it can be customized according to |
| 2 | 60 | 35 | High temperature (5C or above) | ≤3000 | ≤2300 | customer requirements. During installation,wall reinforcement |
| 3 | 75 | 40 | medium temperature(-5°C or above) | ≤4000 | ≤3000 | steel beams or roof hanger steel |
| 4 | 100 | 50 | Low temperature(-30℃C or above) | ≤6300 | ≤4500 | beams need to be configured according to the actual situation. |
| 5 | 150 | 70 | UItra Low temperature (-45C or above) | ≤10000 | ≤6000 |
NOTE:
1、Hotel kitchen and restaurant chain of high and low-temperature cold room, the proposal uses 1 0 0 \mathsf {mm } thick panels cold room.
2、Below - - 3 0 ^ { \circ } \mathsf { C } low-temperature cold room, recommended 1 5 0 \mathsf {mm } thick panels cold room.
Cold Storage Panel
The Structure Characteristics Of Cold Room Panel
Using new automated molding equipment, the single-pressure template is made of 5 0 \mathsf {mm } thick steel plates. It is equipped with a hot and cold temperature control system to maintain the optimal molding temperature of the plate during the molding process, thereby ensuring that the plate surface is flat after molding.
-The lock hook adopts an eccentric device and the hook head is specially enlarged, making it simple and convenient to use.
-The outer part of the lock hook and the interface part of the PU board are flanged to make the connection between the lock hook and the PU panel tighter.
-The cold room panel uses a special mold and is formed by high-pressure foaming. The structure between the panels is tight and equipped with sealing strips. It is not only beautiful but also has good sealing performance after locking.
Different Material Panel
| NO. | Material | Material characteristics | Applied range | Material thickness |
| 1 | Stainless steel | Made of 304# steel,it has good corrosion resistance and heat resistance,low-temperature strength and bending resistance and other mechanical properties, and is non-magnetic. | Suitable for cold rooms in high-end hotels and seafood products. | 0.5mm~1.5mm |
| 2 | PVF steel | A metal composite panel with a metal sheet as the base material and a bright or matte PVC film on the surface. | Suitable foracid-resistant cold room,such as seafood refrigerated trucks,shipping refrigerated containers, etc. | 0.6mm or 0.8mm |
| 3 | Stucco embossed aluminum | It is made of flat aluminum plate and extruded by a mold,and has a beautiful appearance. | Applicable to indoor hotel/kitchen cold rooms | 0.6mm or 0.8mm |
| 4 | Painted galvanized steel | It is made of hot-dip galvanized sheet or hot-dip galvanized sheet as the base plate,and then painted | Applicable to the cold rooms in logistics/food/ho- tel/warehousing | 0.326mm~0.8mm |
| 5 | Galvanized steel | The surface of the cold-rolled plate is plated with a zinc layer ranging from 80 to 125 grams and then formed after heat treatment to provide strong corrosion resistance. | Suitable for producing cold room floor panels | 0.5mm~1.5mm |
| 6 | Non-slip aluminum plate | It is made of aluminum alloy material that has been extruded on the surface.It has a willow leaf pattern for non-slip,high hardness and corrosion resistance. | Suitable for cement floors thatare frequently stepped on and do not have tiles | 1.5mm~5.0mm |
NOTE:
- According to different requirements of customers. The material combinations used in cold room production vary (see the table above for details).
-Steel plates or wooden is added to the inner surface of the cold room floor as reinforcements to adapt to the heavy forklift driving or the heavy pressure of the shelves when receiving goods.
-Some cold rooms directly use bare PU as the base and lay a certain thickness of cement as the floor. This is strong and durable and suitable for ultra-low temperature cold room in hotel kitchens, catering and other industries.
ROUND CORNER COLD ROOM
Rounded corner cold room is suitable for mid-to-high-end hotels, catering
kitchens and other places that have high requirements for food environmental
hygiene.Clean during use to comply with food hygiene requirements.Personalized customization can be carried out according to the specific requirements.
of customers.requirements of customers.
Rectangular Corner Cole Room
-The right-angle cold room is suitable for small and medium-sized cold room. It is not only easy to install but also avoids the positional deviation between the panels during the assembly process of the warehouse due to factors such as uneven ground during on-site construction.
-Through the integration of right-angle corner panels, the appearance of the cold room is smoother and neater.
1
Cold Storage Door
Self-Closing Door
A kind of cold room door widely used in hotels, chain restaurants, etc. It is characterized by the automatic return method of the door body. After closing, the door body and the surface of the door frame are on the same plane. Door closers make it easier to lock the door and the overall appearance of the door is beautiful.
Semi-Insulating Door
A cold room door is widely used in logistics and markets.It is characterized by the fact that the door body is semi-embedded in the door frame. The door frame is equipped with heating wires and magnetic rubber edges, which ensures good sealing and heat preservation effects of cold room. The appearance is neat and beautiful.
Manual Double-Wing Door
Suitable for large cold room or cold room that requires large moving tools in and out.Its characteristic is that the width of a single-door panel can be more than 1.2 meters. Use large double-door handles and fixed-pull door closers to close the door tightly and have good sealing performance. At the same time, opening the door is simple and convenient.
Manual/Electric Sliding Door
A cold room door is widely used in logistics, warehousing, and other places. The door opening is large enough to facilitate the transportation of vehicles in and out.The size of the door can be customized according to the customer's requirements. It is characterized by a spacious door body, and the door leaf is made of integral foam molding, which has good thermal insulation performance and is strong and durable.The warehouse is equipped with safety escape devices and has a neat appearance.
SPLIT UNIT
Split commercial refrigeration equipment for cold storage rooms, which have a small volume, and are for use in medium and low temperatures
| series | Retrigera - | Compressor | Liq | Asp | R-404A | Nominal Consumpti ol | Max. load curent | Flow | Weight | ||||||||
| Model | tion ℃ capaciy EXT | ℃ EXT | |||||||||||||||
| 100 | W | m | m | Voltage | HP | kW | Inch | Inch | KG | A | A | m³/H | KG | ||||
| -5℃-10℃ | CK-ESC1006M1Z | 1205 | 9 | 7 | 220/1/50 | 1/2 | 0.4 | 3/8 1/2 | 5.2 | 6.2 | 1100-1000 | 60 | |||||
| CK-ESC1006M2Z | 1395 | 12 | 9 | 220/1/50 | 3/4 | 0.5 3/8 | 1/2 | 5.7 | 6.9 | 1100-1000 | 60 | ||||||
| 200 300 | CK-ESC1006M4Z | 2011 | 20 | 17 | 220/1/50 1 | 1/4 | 0.9 3/8 | 5/8 | 7.3 | 8.9 | 1920-2000 | 85 | |||||
| CK-ESC1006M6Z | 3162 | 37 | 30 380/3/50 | 1 3/4 | 1.3 | 3/8 | 3/4 | 6 | 6 | 1920-3000 | 110 | ||||||
| CK-ESC1006M7Z | 4107 | 45 | 37 | 380/3/50 | 2 | 1.5 3/8 | 3/4 | 6 | 7.2 | 1920-3000 | 110 | ||||||
| CK-ESC1006M8Z | 4739 | 57 | 46 380/3/50 | 2 1/4 | 1.7 | 1/2 1/2 | 3/4 3/4 | 7 7.6 | 8.5 9.4 | 4540-7400 4540-7400 | 150 | ||||||
| 400 500 | CK-ESC1006M9Z | 5520 | 72 | 58 | 380/3/50 | 3 | 2.2 | 150 | |||||||||
| CK-ESC1006M10Z | 6054 | 83 | 66 | 380/3/50 | 3 1/2 | 2.6 | 1/2 | 3/4 | 8.5 | 10.5 | 4540-7400 | 150 | |||||
| CK-ESC1006M11Z | 71059 | 95 | 76 | 380/3/50 | 4 | 3 | 5/8 | 7/8 | 12.2 | 12.2 | 4540-7600 | 180 | |||||
| -25℃~-15℃ | 100 200 -20℃ | CK-ESC1006M15Z | 940 | 6 | 4 | 220/1/50 | 1 | 0.7 | 3/8 | 5/8 | 5.3 5.6 | 6.4 7.6 | 1100-1300 | 65 | |||
| CK-ESC1006M16Z | 1200 | 9 | 6 | 220/1/50 | 1 1/2 | 1.1 | 3/8 | 5/8 | 7.3 | 8.9 | 1100-1300 1920-3000 | 65 | |||||
| CK-ESC1006M17Z | 1280 | 11 | 8 | 220/1/50 | 1 1/2 | 1.1 | 3/8 | 5/8 5/8 | 6.1 | 6.1 | 1920-3000 | 85 | |||||
| CK-ESC1006M18Z | 1434 | 15 | 10 | 380/3/50 | 13/4 | 1.3 | 3/8 3/8 | 3/4 | 8.8 | 8.8 | 1920-4000 | 90 | |||||
| 300 400 | CK-ESC1006M19Z | 1621 | 22 | 15 | 380/3/50 | 2 | 1.5 | 3/4 | 8.8 | 8.8 | 1920-4000 | 110 | |||||
| CK-ESC1006M20Z | 2513 | 27 | 19 25 | 380/3/50 380/3/50 | 2 1/2 | 1.8 2.2 | 3/8 1/2 | 7/8 | 7.0 | 7.7 | 4540-3800 | 110 | |||||
| CK-ESC1006M21Z | 3035 | 35 | 3 | 7/8 | 7.8 | 9.3 | 4540-7400 | 150 | |||||||||
| 500 | CK-ESC1006M22Z | 3680 | 45 | 32 | 380/3/50 | 4 | 3 | 5/8 | 155 | ||||||||
| CK-ESC1006M23Z | 4289 | 65 | 46 | 380/3/50 | 5 | 3.7 | 5/8 | 11/8 | 9.8 | 11.8 | 4540-5700 | 170 | |||||
| CK-ESC1006M24Z | 6550 | 89 | 64 | 380/3/50 | 7 1/2 | 5.5 | 5/8 | 11/8 | 12.2 | 15.2 | 4540-7600 | 200 | |||||
NOTE:
-Liq: Diameter of liquid tube
-Asp: Diameter of ileotracheal
-Calculation made for 1 0 \mathsf { m } equivalent length
-In the “SPLIT" units INEO advises installing the drain pipe with siphon out of the cold room. For freezer rooms, the piping should be metallic
General Characteristics
-Pre-charged with refrigerant (Max. length 1 0 \mathsf { m } ).
-Hermetic compressor.
-Service valves (Series 100 - 200 - 300).
-Safety valve (Series 400-500).
-Liquid receiver.
-Filter dryer.
-Sight glass in the condensing unit.
-High and low pressure control.
-Thermostatic expansion valve in the evaporator.
-Solenoid valve in the evaporator.
-Automatic defrosting by heating element. -Drainpipe heating element in low Ta (2m).
-Ceiling type evaporator with nitrogen(Series 100 - 200 -300).
-Cubic evaporator with nitrogen (Series 400 - 500).
-Remote multifunctional electronic control.
-Voltage protector.
Options (Ask For Delivery)
-Rotative / failure system for two units -Internet Remote control -By computer and cellphone app -Water-cooling split unit for CK-ESC100\~300
Dimensions
| series | COND(mm) | EVAP(mm) | A | COND(mm) | KG KG | EVAP(mm) | Weight C KG | ||||||||||||||
| A | B | C | D1 D2 | A(H) | B(W) | C(L) | D1 | D2 | series | B | C | A | B | ||||||||
| 370 | 370 | 385 | 710 | 610 | 27 | 1L | 205 | 415 | 870 | 670 | 440 | 10 | 520 | 495 | 800 | 60 | 1L | 280 | 550 970 | 25 | |
| 6 | 1M | 205 | 415 | 770 | 570 | 440 | 0 | 1M | 280 | 550 870 | 20 | ||||||||||
| 37 | 2L | 205 | 415 1250 | 1050 | 440 | 20 | 1000 | 2L | 280 | 550 | 1420 35 | ||||||||||
| 450 | 450 | 485 | 900 | 800 | 3 | 2M | 205 | 415 | 1150 | 950 | 440 | 580 0 | 600 | 75 | 2M | 280 | 550 1250 | 30 | |||
| 500 | 500 | 485 | 900 | 800 | 37 | 3L | 235 | 415 | 1820 | 1620 | 440 | 30 650 | 600 | 1000 | 90 | 3L 320 | 550 | 2000 | 50 | ||
| 3 | 3M | 235 | 415 | 1620 | 1420 | 440 | 0 | 3M | 320 | 550 | 1800 45 | ||||||||||
| 860 | 860 | 650 | 930 | 504 | 59 | 40 | 100 | 730 | 1000 | 140 | |||||||||||
| 1040 | 622 | 0 | 0 | 0 | 130 | ||||||||||||||||
| 74 | 50 110 | 880 | 210 | ||||||||||||||||||
| 960 | 960 | 810 | 0 | 0 | 0 | 1120 180 | |||||||||||||||
Weight
| AR COOLER(mm) | KG | EVAR.+ EMBALAJE /PACKING(mm) | |||||||
| MOD. | A | B | C | D | KG | A | B | C | KG |
| CK-ESC1006M21Z | 495 | 415 | 1094 | 812 | 30 | 540 | 540 | 1140 | 40 |
| CK-ESC1006M22Z | 635 | 460 | 1094 | 812 | 38 | 670 | 570 | 1140 | 50 |
| CK-ESC1006M23Z | 495 | 430 | 1486 | 1204 | 43 | 540 | 540 | 1540 | 60 |
| CK-ESC1006M24Z | 495 | 430 | 1878 | 1596 | 56 | 540 | 520 | 1920 | 70 |
ECO-FRIENDLY STAINLESS SHELF
Easy To Adjust And Configure
-Construct environmentally friendly stainless racks of any configuration and match any size to the area. -Available in 3 heights, 4 depths, and 6 lengths in order to build a space-efficient layout for any area. -The partition can be adjusted up and down by 100 mm increments and decreases without the need to disassemble the frame.
-When building a frame at a 90-degree right angle or U-bend, the frame can be connected by corner connectors.
Absolutely Robust, Durable and Stable
-The columns and beams, and the load-bearing parts are made of steel core, and the surface is modified polypropylene material.
-Steel tubing is included to give the shelf strength and durability.
-The surface of polypropylene does not shatter or corrode.
-Column inserts provide unique cross stability.
Never Rusts
-Can be used in any wet or dry area -There are no welds or gaps, so it never rusts -Saltwater or marine air also does not corrode environmentally friendly stainless steel shelves -The environmentally friendly stainless shelf is suitable for open freezers or freezers and can withstand temperatures as low as - 3 8 ^ { \circ } C
Heavy Packing Rack
| Height 225mm | Length | 910 mm | 1060 mm | 1220 mm | 1370 mm | 1525mm | 1825mm | Trestle |
| Bar lattice heavy cushion shelves | ||||||||
| 355mm | Model | YSW-P955 | YSW-P956 | YSW-P957 | YSW-P958 | YSW-P959 | YSW-P960 | / |
| N.W | 7.46 | 8.09 | 8.76 | 9.48 | 10.63 | 11.63 | 1.05 | |
| 455mm | Model | YSW-P961 | YSW-P962 | YSW-P963 | YSW-P964 | YSW-P965 | YSW-P966 | / |
| N.W | 8.40 | 9.13 | 9.94 | 10.76 | 11.56 | 13.24 | 1.15 | |
| 530mm | Model | YSW-P967 | YSW-P968 | YSW-P969 | YSW-P970 | YSW-P971 | YSW-P972 | / |
| N.W | 9.15 | 9.89 | 10.79 | 11.62 | 12.43 | 14.21 | 1.24 | |
| 610mm | Model | YSW-P973 | YSW-P974 | YSW-P975 | YSW-P976 | YSW-P977 | YSW-P978 | / |
| N.W | 9.48 | 10.6 | 11.17 | 12.14 | 13.09 | 14.87 | 1.34 | |
| Heavy packing rack(Solid mesh) | ||||||||
| 455mm | Model | YSW-P997 | YSW-P998 | YSW-P999 | YSW-P1000 | YSW-P1001 | YSW-P1002 | / |
| N.W | 8.57 | 9.30 | 10.09 | 10.96 | 11.66 | 13.31 | 1.15 | |
| 530 mm | Model | YSW-P1003 | YSW-P1004 | YSW-P1005 | YSW-P1006 | YSW-P1007 | YSW-P1008 | / |
| N.W | 9.25 | 9.91 | 10.81 | 11.66 | 12.53 | 14.24 | 1.24 | |
| 610mm | Model | YSW-P1009 | YSW-P1010 | YSW-P1011 | YSW-P1012 | YSW-P1013 | YSW-P1014 | / |
| N.W | 9.68 | 10.77 | 11.47 | 12.33 | 13.34 | 15.11 | 1.34 | |
Grid Halftone Kit
| Width | Length | 910mm | 1060 mm | 1220 mm | 1370 mm | 1525 mm | 1825 mm |
| 355mm | Model | YSW-P1015 | YSW-P1016 | YSW-P1017 | YSW-P1018 | YSW-P1019 | YSW-P1020 |
| N.W | 4.00 | 4.61 | 5.29 | 6.03 | 6.72 | 11.17 | |
| 455mm | Model | YSW-P1021 | YSW-P1022 | YSW-P1023 | YSW-P1024 | YSW-P1025 | YSW-P1026 |
| N.W | 4.64 | 5.35 | 6.17 | 7.01 | 7.79 | 12.48 | |
| 530mm | Model | YSW-P1027 | YSW-P1028 | YSW-P1029 | YSW-P1030 | YSW-P1031 | YSW-P1032 |
| N.W | 5.01 | 5.73 | 6.64 | 7.49 | 8.30 | 13.09 | |
| 610mm | Model | YSW-P1033 | YSW-P1034 | YSW-P1035 | YSW-P1036 | YSW-P1037 | YSW-P1038 |
| N.W | 5.15 | 6.01 | 6.83 | 7.89 | 8.75 | 13.59 |
Solid Partition Kit
| Width | Length | 910mm | 1060 mm | 1220 mm | 1370 mm | 1525mm | 1825 mm |
| 455mm | Model | YSW-P1039 | YSW-P1040 | YSW-P1041 | YSW-P1042 | YSW-P1043 | YSW-P1044 |
| N.W | 4.77 | 5.52 | 6.32 | 7.21 | 8.02 | 12.41 | |
| 530mm | Model | YSW-P1045 | YSW-P1046 | YSW-P1047 | YSW-P1048 | YSW-P1049 | YSW-P1050 |
| N.W | 5.02 | 5.75 | 6.66 | 7.52 | 8.69 | 13.12 | |
| 610mm | Model | YSW-P1051 | YSW-P1052 | YSW-P1053 | YSW-P1054 | YSW-P1055 | YSW-P1056 |
| N.W | 5.35 | 6.18 | 7.13 | 8.08 | 9.00 | 13.93 |
Strip Base Rack 1600 mm
| Width | Length | 910 mm | 1060 mm | 1220 mm | 1370 mm | 1525 mm | 1825 mm |
| 355mm | Model | YSW-P794 | YSW-P795 | YSW-P796 | YSW-P797 | YSW-P798 | YSW-P799 |
| N.W/CBM | 28.40/0.076 | 31.15/0.092 | 33.91/0.096 | 37.31/0.112 | 40.76/0.114 | 45.09/0.143 | |
| 455mm | Model | YSW-P800 | YSW-P801 | YSW-P802 | YSW-P803 | YSW-P804 | YSW-P805 |
| N.W/CBM | 31.30/0.084 | 34.47/0.100 | 37.76/0.106 | 41.58/0.122 | 45.34/0.127 | 21.02/0.154 | |
| 530mm | Model | YSW-P806 | YSW-P807 | YSW-P808 | YSW-P809 | YSW-P810 | YSW-P811 |
| N.W/CBM | 33.14/0.098 | 36.41/0.114 | 39.86/0.128 | 43.78/0.134 | 47.46/0.145 | 53.53/0.172 | |
| 610mm | Model | YSW-P812 | YSW-P813 | YSW-P814 | YSW-P815 | YSW-P816 | YSW-P817 |
| N.W/CBM | 33.97/0.103 | 37.86/0.113 | 40.97/0.137 | 45.49/0.148 | 49.89/0.156 | 55.65/0.189 |
Strip Base Rack 1800 mm
| Width | Length | 910 mm | 1060 mm | 1220 mm | 1370 mm | 1525 mm | 1825 mm |
| 355mm | Model | YSW-P818 | YSW-P819 | YSW-P820 | YSW-P821 | YSW-P822 | YSW-P823 |
| N.W/CBM | 30.15/0.078 | 32.50/0.094 | 35.66/0.098 | 39.06/0.114 | 42.51/0.116 | 46.84/0.145 | |
| 455mm | Model | YSW-P824 | YSW-P825 | YSW-P826 | YSW-P827 | YSW-P828 | YSW-P829 |
| N.W/CBM | 33.05/0.086 | 36.22/0.102 | 39.51/0.108 | 43.33/0.124 | 47.09/0.129 | 52.77/0.156 | |
| 530mm | Model | YSW-P830 | YSW-P831 | YSW-P832 | YSW-P833 | YSW-P834 | YSW-P835 |
| N.W/CBM | 34.89/0.100 | 38.16/0.116 | 41.61/0.130 | 45.53/0.138 | 49.21/0.147 | 55.28/0.174 | |
| 610mm | Model | YSW-P836 | YSW-P837 | YSW-P838 | YSW-P839 | YSW-P840 | YSW-P841 |
| N.W/CBM | 35.72/0.107 | 39.61/0.117 | 42.72/0.140 | 47.24/0.160 | 51.64/0.161 | 57.40/0.202 |
Strip Base Rack 2100 mm
| Width | Length | 910 mm | 1060 mm | 1220 mm | 1370 mm | 1525 mm | 1825 mm |
| 355mm | Model | YSW-P842 | YSW-P843 | YSW-P844 | YSW-P845 | YSW-P846 | YSW-P847 |
| N.W/CBM | 31.12/0.081 | 33.47/0.097 | 36.63/0.101 | 40.48/0.119 | 43.48/0.119 | 47.81/0.148 | |
| 455mm | Model | YSW-P848 | YSW-P849 | YSW-P850 | YSW-P851 | YSW-P852 | YSW-P853 |
| N.W/CBM | 34.42/0.089 | 37.19/0.105 | 40.48/0.111 | 44.30/0.127 | 48.06/0.132 | 53.74/0.159 | |
| 530mm | Model | YSW-P854 | YSW-P855 | YSW-P856 | YSW-P857 | YSW-P858 | YSW-P859 |
| N.W/CBM | 35.86/0.103 | 39.13/0.119 | 42.58/0.133 | 46.50/0.141 | 50.18/0.150 | 56.25/0.177 | |
| 610mm | Model | YSW-P860 | YSW-P861 | YSW-P862 | YSW-P863 | YSW-P864 | YSW-P865 |
| N.W/CBM | 36.69/0.110 | 40.58/0.120 | 43.69/0.143 | 48.21/0.163 | 52.61/0.164 | 58.37/0.205 |
155
Solid Partition Foundation Frame 1600 mm
1具点
| Width | Length | 910 mm | 1060 mm | 1220 mm | 1370 mm | 1525 mm | 1825 mm |
| 455mm | Model | YSW-P895 | YSW-P896 | YSW-P897 | YSW-P898 | YSW-P899 | YSW-P900 |
| N.W/CBM | 31.67/0.084 | 34.95/0.100 | 38.22/0.106 | 42.15/0.122 | 45.91/0.127 | 51.50/0.154 | |
| 530mm | Model | YSW-P901 | YSW-P902 | YSW-P903 | YSW-P904 | YSW-P905 | YSW-P906 |
| N.W/CBM | 33.21/0.098 | 36.49/0.114 | 40.09/0.128 | 43.97/0.134 | 47.89/0.145 | 53.53/0.172 | |
| 610mm | Model | YSW-P907 | YSW-P908 | YSW-P909 | YSW-P910 | YSW-P911 | YSW-P912 |
| N.W/CBM | 35.85/0.103 | 39.45/0.113 | 43.28/0.137 | 47.41/0.148 | 51.60/0.156 | 57.85/0.189 |
Solid Partition Foundation Frame 1800 mm
二
| Width | Length | 910 mm | 1060 mm | 1220 mm | 1370 mm | 1525 mm | 1825 mm |
| 455mm | Model | YSW-P913 | YSW-P914 | YSW-P915 | YSW-P916 | YSW-P917 | YSW-P918 |
| N.W/CBM | 33.42/0.086 | 36.70/0.102 | 39.97/0.108 | 43.90/0.124 | 48.08/0.129 | 53.25/0.156 | |
| 530mm | Model | YSW-P919 | YSW-P920 | YSW-P921 | YSW-P922 | YSW-P923 | YSW-P924 |
| N.W/CBM | 34.96/0.100 | 38.24/0.116 | 41.84/0.130 | 45.72/0.138 | 49.63/0.147 | 55.28/0.174 | |
| 610mm | Model | YSW-P925 | YSW-P926 | YSW-P927 | YSW-P928 | YSW-P929 | YSW-P930 |
| N.W/CBM | 37.60/0.107 | 41.10/0.117 | 54.03/0.140 | 49.16/0.160 | 53.35/0.161 | 59.60/0.202 |
Solid Partition Foundation Frame 2100 mm
月
| Width | Length | 910 mm | 1060 mm | 1220 mm | 1370 mm | 1525 mm | 1825 mm |
| 455mm | Model | YSW-P913-2000 | YSW-P914-2000 | YSW-P915-2000 | YSW-P916-2000 | YSW-P917-2000 | YSW-P918-2000 |
| N.W/CBM | 34.15/0.089 | 37.67/0.105 | 40.94/0.111 | 44.87/0.127 | 49.05/0.132 | 54.32/0.159 | |
| 530mm | Model | YSW-P919-2000 | YSW-P920-2000 | YSW-P921-2000 | YSW-P922-2000 | YSW-P923-2000 | YSW-P924-2000 |
| N.W/CBM | 35.97/0.103 | 39.21/0.119 | 42.81/0.133 | 46.69/0.141 | 50.61/0.150 | 56.25/0.177 | |
| 610mm | Model | YSW-P925-2000 | YSW-P926-2000 | YSW-P927-2000 | YSW-P928-2000 | YSW-P929-2000 | YSW-P930-2000 |
| N.W/CBM | 38.57/0.110 | 42.07/0.120 | 46.00/0.143 | 50.13/0.163 | 54.32/0.164 | 60.57/0.205 |
156
HIGH DENSITY SOLID MOBILE BASE RACK
Easy To Adjust And Configure
Maximum storage capacity is achieved by forming storage channels within all available space. The orbital mobile shelf system consists of a fixed base frame fixed at both ends to the raised ground rail system, with a high-density mobile shelf in the middle. The rails are easy to install and require no drilling or bonding.
A: Fixed shelf B: Mobile shelf C: Track D: Active channel -Track can be fixed to the bottom of the shelf. There is no need to drill holes in the floor, tracks can be fixed with anchor bolts. -The raised track provides a smooth surface for easy movement of the shelves and ensures that dirt does not enter and is easy to sweep.
-When loading heavy loads, the shelves can also move smoothly on the track.
-Slotted castors roll easily on raised tracks, the product can be used on any ground, and crash rings protect the castors.
Casters
High-density mobile shelf includes 4 high-density casters and 4 high-density crash rings; The load-bearing capacity of the high-density mobile shelf is 3 4 0 \mathsf {kg } ; The track kit includes all the necessary hardware.
| Model | YSW-P893 | YSW-P894 |
| Name | 5" High density caster | 5" High density anti collision ring |
| size | 127mm/5" | 127mm/5" |
| Model | YSW-P866 | YSW-P867 | YSW-P868 |
| Name | Mobile guide kit used in 3 moblie shelf | Mobile guide kit used in 4 moblie shelf | Mobile guide kit used in 5 moblie shelf |
| size | 3050mm | 3660mm | 4420mm |
High Density Strip Mobile Base Rack 1880 mm
| Width | Length | 910 mm | 1060 mm | 1220 mm | 1370 mm | 1525 mm |
| 530mm | Model | YSW-P869 | YSW-P870 | YSW-P871 | YSW-P872 | YSW-P873 |
| N.W/CBM | 34.89/0.100 | 38.16/0.116 | 41.61/0.130 | 45.53/0.138 | 49.21/0.147 | |
| 610mm | Model | YSW-P875 | YSW-P876 | YSW-P877 | YSW-P878 | YSW-P879 |
| N.W/CBM | 35.72/0.107 | 39.61/0.117 | 42.72/0.140 | 47.24/0.160 | 51.64/0.161 |
自
High Density Solid Mobile Base Rack 1880 mm
| Width | Length | 910 mm | 1060 mm | 1220 mm | 1370 mm | 1525 mm |
| 530mm | Model | YSW-P881 | YSW-P882 | YSW-P883 | YSW-P884 | YSW-P885 |
| N.W/CBM | 34.96/0.100 | 38.24/0.116 | 41.84/0.130 | 45.72/0.138 | 49.63/0.147 | |
| 610mm | Model | YSW-P887 | YSW-P888 | YSW-P889 | YSW-P890 | YSW-P891 |
| N.W/CBM | 37.60/0.107 | 41.10/0.117 | 54.03/0.140 | 49.16/0.160 | 53.35/0.161 |
158
