CHY 圆柱形光电开关 Photoelectric Sensor Cylindrical Type
选型说明 Model Designation
| 序号 No | 项目 Item | 代号 Code | 说明 Description |
| ① | 系列号 Serial number | CHY | 高精度型(圆柱形光电开关) High precision type(Photoelectric Sensor Cylindrical Type) |
| ② | 产品尺寸 Product size | 18 | 12=012 18=018 30=030 |
| ③ | 壳体材质 Shell material | 无None | 塑胶壳体 Plastic shell |
| B | 镀镍黄铜 Nickel plated brass | ||
| ④ | 产品类别 Product category | D | 漫反射型 Diffuse-reflective type |
| R | 镜面反射型 Retro-reflective type | ||
| T | 对射型 Through-bethod type | ||
| ⑤ | 检测距离 Detection distance | 2 | 05=5cm 10=10cm 30=30cm 50=50cm 70=70cm 1=1m 2=2m 3=3m 4=4m 5=5m 10=10m 15=15m |
| ⑥ | 输出方式 Output mode | N | NPN三线NPN 3wires |
| P | PNP三线PNP 3wires | ||
| R | 继电器 Relay | ||
| A | AC二线 AC 2wires | ||
| ⑦ | 输出状态 Output state | 1 | 常开 NO |
| 2 | 常闭 NC | ||
| 3 | 常开+常闭 NO+NC | ||
| ⑧ | 连接形式 Connection | 无None | 引线式 Lead type |
| M | M12接插件 M12 connector | ||
| D | 德驰型接插件 Deutsch type connector | ||
| A | AMP型接插件 AMP connector | ||
| S | SM型接插件 SM connector | ||
| ⑨ | 特殊规格 Special specifications | L1-L5 | L1表示1米线(线长不仅限L5) L1 means 1 meter line (line length is not limited to L5) |
CHS 方形光电开关 Photoelectric Sensor Square Type
选型说明 Model Designation
| 序号 No | 项目 Item | 代号 Code | 说明 Description |
| ① | 系列号 Serial number | CHS | 高精度型(方形光电开关) High precision type (Photoelectric Sensor Square Type) |
| ② | 产品尺寸 Product size | 50 | 30=□3050=□5070=□70 |
| ③ | 产品标准 Product standards | D | 漫反射型 Diffuse-reflective type |
| R | 镜面反射型 Retro-reflective type | ||
| T | 对射型 Through-bethod type | ||
| ④ | 检测距离 Detection distance | 4 | 30=30cm50=50cm 1=1m4=4m 5=5m 10=10m15=15m |
| ⑤ | 输出方式 Output mode | N | NPN三线NPN 3wires |
| P | PNP三线PNP 3wires | ||
| R | 继电器 Relay | ||
| A | AC二线 AC 2wires | ||
| ⑥ | 输出状态 Output state | 1 | 常开NO |
| 2 | 常闭NC | ||
| 3 | 常开+常闭 NO+NC | ||
| ⑦ | 连接形式 Connection | 无None | 引线式 Lead type |
| M | M12接插件 M12 connector | ||
| D | 德驰型接插件 Deutsch type connector | ||
| A | AMP型接插件 AMP connector | ||
| S | SM型接插件 SM connector | ||
| ⑧ | 特殊规格 Special specifications | L1-L5 | L1表示1米线(线长不仅限L5) L1 means 1 meter line (line length is not limited to L5) |
CHU U形光电开关 Photoelectric Sensor U Type
选型说明 Model Designation
| 序号 No | 项目 Item | 代号 Code | 说明 Description |
| ① | 系列号Serialnumber | CHU | 高精度型(U形光电开关) High precision type ( Photoelectric Sensor U Type) |
| ② | 产品尺寸Product size | 07 | 07=07 10=010 30=030 50=050 |
| ③ | 检测距离Detection distance | 07 | 07=7mm 10=10mm 30=30mm 50=50mm |
| ④ | 输出方式Output mode | N | NPN三线NPN 3wires |
| P | PNP三线PNP 3wires | ||
| D | DC二线 DC 2wires | ||
| K | AC二线 AC 2wires | ||
| ⑤ | 输出状态Output state | 1 | 常开NO |
| 2 | 常闭NC | ||
| 3 | 常开+常闭 NO+NC | ||
| ⑥ | 连接形式Connection | 无None | 引线式 Lead type |
| M | M12接插件 M12 connector | ||
| D | 德驰型接插件 Deutsch type connector | ||
| A | AMP型接插件 AMP connector | ||
| S | SM型接插件 SM connector | ||
| ⑦ | 特殊规格Special specifications | L1-L5 | L1表示1米线(线长不仅限L5) L1 means 1 meter line (line length is not limited to L5) |
CTS4 智能温控仪 Intelligent Temperature Controller
选型说明 Model Designation
CE.
| 序号 No | 项目 Item | 代号 Code | 说明 Description |
| ① | 公司名称Name of the company | C | 昌得电气科技有限公司CNTD |
| ② | 系列号Serial number | TS | 标准型数码双显示PID温度控制器 Standard digital dual display PID temperature controller |
| TZ | 高精度数码双显示PID温度控制器 High precision digital dual display PID temperature controller | ||
| ③ | 显示数位Digit | 4 | 9999(4位Digit) |
| ④ | 外形尺寸Dimensions | S | 48×48 |
| V | 48×96 | ||
| M | 72×72 | ||
| L | 96×96 | ||
| H | 96×48 | ||
| ⑤ | 电源电压Voltage supply | 2 | 24VAC 50/60Hz, 24-48VDC |
| 4 | 开关电源Switch power supply (100-240V AC, 50HZ) | ||
| A-Z | 定制电源电压Custom power supply voltage | ||
| ⑥ | 控制输出Control output | 1 | 继电器Relay |
| 2 | SSR输出Output | ||
| 3□ | 模拟量输出 A: 0~20mA, 4-20mA, B: 0-5V, 1-5V Analog output: A: 0~20mA, 4-20mA, B: 0-5V, 1-5V | ||
| 4 | 可控硅过零输出SCR zero-crossing output | ||
| 5 | 可控硅自带(5A) SCR built-in | ||
| 6 | SSR+继电器输出Relay output | ||
| A-Z | A-Z字母组合,代表其他或定制控制输出模式A-Z letter combination represents other or custom control output modes | ||
| ⑦ | 报警输出Alarm output | 1 | 1路继电器Way relay |
| 2 | 2路继电器Way relay | ||
| 3 | 1路固态Solid state | ||
| 4 | 2路固态Solid state | ||
| A-Z | A-Z字母组合,代表其他或定制控制输出模式A-Z letter combination represents other or custom control output modes | ||
| ⑧ | 分度号Graduation | 无None | 热电偶输入K、E、J、L、T、R、S;热电阻输入PT100、Cu50(全功能)Thermocouple input K, E, J, L, T, R, S, Thermal resistance input PT100, Cu50 (full function) |
| A-Z | A-Z字母组合,代表其他或定制报警输出A-Z letter combination, representing other or customized alarm output | ||
| ⑨ | 变送输出Transmission output | 无None | 无此项功能 No such function |
| T | 带变送输出功能 With transmission output function | ||
| ①0 | 特殊规格Special specifications | 无None | 无此项功能 No such function |
| R | 带RS485通讯功能 With RS485 communication function |
CTS4 智能温控仪 Intelligent Temperature Controller
CTS4S 常用型号 Common Model
| 产品型号Product model | 控制输出形式Control output form | 报警功能Alarm function | 额定电压Rated voltage | 通讯功能Communication function | 温度输入Temperature input |
| CTS4S-411 | 继电器输出Relay output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | 热电偶KEJLTRS,热电阻PT100 CU50Thermocouple K E J L TR S, thermal resistancePT100 CU50 |
| CTS4S-412 | 继电器输出Relay output | 二路继电器报警Two way relay alarm | 100-240VAC | 1 | |
| CTS4S-421 | 固态输出Solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4S-422 | 固态输出Solid state output | 二路继电器报警Two way relay alarm | 100-240VAC | 1 | |
| CTS4S-461 | 继电器+固态输出Relay + solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4S-43A1 | 模拟量输出4-20maAnalog output4-20ma | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4S-411R | 继电器输出Relay output | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4S-421R | 固态输出Solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4S-43A1R | 模拟量输出4-20maAnalog output4-20ma | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4S-411T | 继电器输出Relay output | 一路继电器报警、带变送输出One relay alarm, with converter output | 100-240VAC | 1 | |
| CTS4S-421T | 固态输出Solid state output | 一路继电器报警、带变送输出One relay alarm, with converter output | 100-240VAC | 1 |
Note: The above is a common model reference, not in the table reference selection description.
CTS4M 常用型号 Common Model
| 产品型号Product model | 控制输出形式Control output form | 报警功能Alarm function | 额定电压Rated voltage | 通讯功能Communication function | 温度输入Temperature input |
| CTS4M-411 | 继电器输出Relay output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | 热电偶KEJLTRS,热电阻PT100 CU50Thermocouple K E J L TR S, thermal resistancePT100 CU50 |
| CTS4M-412 | 继电器输出Relay output | 二路继电器报警Two way relay alarm | 100-240VAC | 1 | |
| CTS4M-421 | 固态输出Solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4M-422 | 固态输出Solid state output | 二路继电器报警Two way relay alarm | 100-240VAC | 1 | |
| CTS4M-461 | 继电器+固态输出Relay + solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4M-43A1 | 模拟量输出4-20maAnalog output4-20ma | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4M-411R | 继电器输出Relay output | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4M-421R | 固态输出Solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4M-43A1R | 模拟量输出4-20maAnalog output4-20ma | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4M-411T | 继电器输出Relay output | 一路继电器报警、带变送输出One relay alarm, with converter output | 100-240VAC | 1 | |
| CTS4M-421T | 固态输出Solid state output | 一路继电器报警、带变送输出One relay alarm, with converter output | 100-240VAC | 1 |
Note: The above is a common model reference, not in the table reference selection description.
CTS4 智能温控仪 Intelligent Temperature Controller
CTS4L 常用型号 Common Model
| 产品型号Product model | 控制输出形式Control output form | 报警功能Alarm function | 额定电压Rated voltage | 通讯功能Communication function | 温度输入Temperature input |
| CTS4L-411 | 继电器输出Relay output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | 热电偶KEJLTRS,热电阻PT100 CU50Thermocouple K E J L TR S, thermal resistancePT100 CU50 |
| CTS4L-412 | 继电器输出Relay output | 二路继电器报警Two way relay alarm | 100-240VAC | 1 | |
| CTS4L-421 | 固态输出Solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4L-422 | 固态输出Solid state output | 二路继电器报警Two way relay alarm | 100-240VAC | 1 | |
| CTS4L-461 | 继电器+固态输出Relay + solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4L-43A1 | 模拟量输出4-20maAnalog output4-20ma | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4L-411R | 继电器输出Relay output | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4L-421R | 固态输出Solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4L-43A1R | 模拟量输出4-20maAnalog output4-20ma | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4L-411T | 继电器输出Relay output | 一路继电器报警、带变送输出One relay alarm, with converter output | 100-240VAC | 1 | |
| CTS4L-421T | 固态输出Solid state output | 一路继电器报警、带变送输出One relay alarm, with converter output | 100-240VAC | 1 |
Note: The above is a common model reference, not in the table reference selection description.
| 产品型号Product model | 控制输出形式Control output form | 报警功能Alarm function | 额定电压Rated voltage | 通讯功能Communication function | 温度输入Temperature input |
| CTS4V-411 | 继电器输出Relay output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | 热电偶KEJLTRS,热电阻PT100 CU50Thermocouple K E J L TR S, thermal resistancePT100 CU50 |
| CTS4V-412 | 继电器输出Relay output | 二路继电器报警Two way relay alarm | 100-240VAC | 1 | |
| CTS4V-421 | 固态输出Solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4V-422 | 固态输出Solid state output | 二路继电器报警Two way relay alarm | 100-240VAC | 1 | |
| CTS4V-461 | 继电器+固态输出Relay + solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4V-43A1 | 模拟量输出4-20maAnalog output4-20ma | 一路继电器报警One-line relay alarm | 100-240VAC | 1 | |
| CTS4V-411R | 继电器输出Relay output | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4V-421R | 固态输出Solid state output | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4V-43A1R | 模拟量输出4-20maAnalog output4-20ma | 一路继电器报警One-line relay alarm | 100-240VAC | RS485通讯RS485 communication | |
| CTS4V-411T | 继电器输出Relay output | 一路继电器报警、带变送输出One relay alarm, with converter output | 100-240VAC | 1 | |
| CTS4V-421T | 固态输出Solid state output | 一路继电器报警、带变送输出One relay alarm, with converter output | 100-240VAC | 1 |
Note: The above is a common model reference, not in the table reference selection description.
CME4 模组式温控仪 Modular Temperature Control Instrument
选型说明 Model Designation
CE 2
| 序号 No | 项目 Item | 代号 Code | |
| 说明 Description | |||
| ① | 公司名称Name of the company | C | 昌得电气科技有限公司(CNTD) |
| ② | 系列号Serial number | ME | 标准模组式温控器 Standard modular thermostat |
| MH | 高精度型模组式温控器 High-precision modular thermostat | ||
| ③ | 通道数量Number of channels | 1 | 单通道 Single channel |
| 2 | 双通道 Dual channel | ||
| 4 | 四通道 Four channels | ||
| 8 | 八通道 Eight channels | ||
| 12 | 十二通道 Twelve channels | ||
| ④ | 电源电压Voltage supply | 2 | 24V AC 50/60Hz, 18-32VDC |
| 4 | 100-240V AC, 50/60Hz | ||
| ⑤ | 温度输入Temperature input | K | 热电偶(K、E、J、L、T、R、S)Thermocouple (K,E, J, L, T, R, S) |
| P | 热电阻输入(PT100、Cu50)Thermal resistance input (PT100, Cu50) | ||
| A | 4-20mA输入4-20mA input | ||
| ⑥ | 控制输出Control output | 1 | 继电器 Relay |
| 2 | SSR输出 SSR output | ||
| A | 0-20mA、4-20mA | ||
| B | 0-5V、1-5V | ||
| A-Z | A-Z字母组合,代表其他或定制控制输出模式A-Z letter combination represents other or custom control output modes | ||
| ⑦ | 通讯Communication | N | 无通讯输出 No communication output |
| R | RS485通讯 RS485 communication | ||
| ⑧ | 组合快接接口Combination quick connectioninterface | 无 | 无快接 No quick connection |
| 1 | 左侧快接输入 Quick connect input on the left | ||
| 2 | 右侧快接输出 Quick connect output on the right | ||
| 3 | 左右快接输入输出 Left and right quick connection input and output |
模块化结构设计,可选多模组拼接方式,将多个温控模组通过侧面快插口进行拼接使用,实现通道数翻倍效果,多个4路模组可拼接成为8路、16路以及更多控温通道;
With RS485 communication interface, standard modbus RTU communication protocol, easy to communicate with PLC or configuration screen, online monitoring of temperature data, real-time control by the host equipment;
Modular structure design, optional multi-module splicing method, multiple temperature control modules are spliced through the side quick socket to achieve the effect of doubling the number of channels, multiple 4-channel modules can be spliced into 8-channel, 16-channel and more temperature control channels;
单功能型时间继电器 Single-function time relay
产品图片Product picture![]() | ||||
| 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage | |
| CDT6-A110M | 通电延时Power-on delay | 1组转换、输出触点10A1 group conversion, Output contact 10A | AC220V | |
| CDT6-A210M | 2 组转换、输出触点 10A2 group conversion, Output contact 10A | AC220V | ||
| CDT6-AT10M | 1 组延时 +1 组瞬动、输出触点 10A1 group delay +1 group instantaneous, Output contact 10A | AC220V | ||
| CDT6-B110M | 延时断开Delay disconnect | 1组转换、输出触点10A1 group conversion, Output contact 10A | AC220V | |
| CDT6-B210M | 1组转换、输出触点10A1 group conversion, Output contact 10A | AC220V | ||
| CDT6-BT10M | 1 组延时 +1 组瞬动、输出触点 10A1 group delay +1 group instantaneous, Output contact 10A | AC220V | ||
| CDT6-A116M | 通电延时Power-on delay | 1组转换、输出触点16A1 group conversion, Output contact 16A | AC220V | |
| CDT6-A216M | 2 组转换、输出触点 16A2 group conversion, Output contact 16A | AC220V | ||
| CDT6-AT16M | 1 组延时 +1 组瞬动、输出触点 16A1 group delay +1 group instantaneous, Output contact 16A | AC220V | ||
| CDT6-B116M | 延时断开Delay disconnect | 1组转换、输出触点16A1 group conversion, Output contact 16A | AC220V | |
| CDT6-B216M | 1组转换、输出触点16A1 group conversion, Output contact 16A | AC220V | ||
| CDT6-BT16M | 1 组延时 +1 组瞬动、输出触点 16A1 group delay +1 group instantaneous, Output contact 16A | AC220V |
产品图片Product picture![]() | 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage |
| CDT6-M110M | 多功能型Multifunctional | 1组转换、输出触点10A1 group conversion, Output contact 10A | AC220V | |
| CDT6-M210M | 2 组转换、输出触点 10A2 group conversion, Output contact 10A | AC220V | ||
| CDT6-M116M | 1组转换、输出触点16A1 group conversion, Output contact 16A | AC220V | ||
| CDT6-M216M | 2组转换、输出触点16A2 group conversion, Output contact 16A | AC220V |
| 产品图片Product picture | 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage |
![]() | CDT6-EC110M | 通电延时、延时断开Power delay, delaydisconnect | 1组转换、输出触点10A1 group conversion, Output contact 10A | AC220V |
产品图片Product picture![]() | 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage |
| CDT6-K208W | 通电延时、延时断开Power delay, delaydisconnect | 2组转换、输出触点8A2 group conversion, Output contact 8A | AC/DC12V-240V | |
| CDT6-K116W | 1组转换、输出触点16A1 group conversion, Output contact 16A | AC/DC12V-240V |
Note: The above is a common model reference, not in the table reference selection description.
CDT6系列时间继电器 CDT6 Series Time Relay
常用型号 Common Model
数显式时间继电器 Digital Display Time Relay
| 产品图片Product picture | 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage |
![]() | CDT6-X110W | 多功能型Multifunctional | 1组转换、输出触点10A1 group conversion, Output contact 10A | AC/DC12V-240V |
| CDT6-X210W | 2 组转换、输出触点 10A2 group conversion, Output contact 10A | AC/DC12V-240V | ||
| CDT6-X116W | 1组转换、输出触点16A1 group conversion, Output contact 16A | AC/DC12V-240V | ||
| CDT6-X216W | 2组转换、输出触点16A2 group conversion, Output contact 16A | AC/DC12V-240V |
双延时型时间继电器 Dual Delay Type Time Relay
| 产品图片Product picture | 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage |
![]() | CDT6-2T210M | 双通电延时Double current delay | 2组转换、输出触点10A2 group conversion, Output contact 10A | AC220V |
| CDT6-2T216M | 2组转换、输出触点16A2 group conversion, Output contact 16A | AC220V |
循环延时型时间继电器 Cycle Delay Type Time Relay
产品图片Product picture![]() | 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage |
| CDT6-S110M | 循环延时Cycle delay | 1组转换、输出触点10A1 group conversion, Output contact 10A | AC220V | |
| CDT6-S210M | 2 组转换、输出触点 10A2 group conversion, Output contact 10A | AC220V | ||
| CDT6-S116M | 1组转换、输出触点16A1 group conversion, Output contact 16A | AC220V | ||
| CDT6-S216M | 2组转换、输出触点16A2 group conversion, Output contact 16A | AC220V |
延时脉冲型时间继电器 Delay Pulse Type Time Relay
| 产品图片Product picture | 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage |
![]() | CDT6-P110M | 延时脉冲Delay pulse | 1组转换、输出触点10A1 group conversion, Output contact 10A | AC220V |
| CDT6-P210M | 2 组转换、输出触点 10A2 group conversion, Output contact 10A | AC220V | ||
| CDT6-P116M | 1组转换、输出触点16A1 group conversion, Output contact 16A | AC220V | ||
| CDT6-P216M | 2组转换、输出触点16A2 group conversion, Output contact 16A | AC220V |
数字式设定时间继电器 Digital Set Time Relay
| 产品图片Product picture | 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage |
![]() | CDT6-ST210M | 多功能型Multifunctional | 2组转换、输出触点10A2 group conversion, Output contact 10A | AC220V |
| CDT6-ST216M | 2组转换、输出触点16A2 group conversion, Output contact 16A | AC220V | ||
| CDT6-ST210H | 2组转换、输出触点10A2 group conversion, Output contact 10A | AC220V | ||
| CDT6-ST216H | 2组转换、输出触点16A2 group conversion, Output contact 16A | AC220V |
Note: The above is a common model reference, not in the table reference selection description.
交流电流监控继电器 AC Current Monitoring Relay
单相电压监控继电器/相序保护器 Single-phase Voltage Monitoring Relay/ Phase Sequence Protector
产品图片Product picture![]() | 产品型号Product model | 功能Feature | 输出触点参数Output contact parameters | 额定电压Rated voltage |
| CDV6-110-D12 | 过压/欠压通过旋钮选择Overvoltage/undervoltage is selected by knob | 输出触点10AOutput contact 10A | DC12V | |
| CDV6-110-AD48 | AC/DC24V-48V | |||
| CDV6-110-AD240 | AC/DC110V-240V | |||
| CDV6-110-A220 | AC220V | |||
| CDV6-210-D12 | 同时具有过压和欠压功能It has both overvoltage and undervoltagefunctions | DC12V | ||
| CDV6-210-AD48 | AC/DC24V-48V | |||
| CDV6-210-AD240 | AC/DC110V-240V | |||
| CDV6-210-A220 | AC220V | |||
| CDV6-116-D12 | 过压/欠压通过旋钮选择Overvoltage/undervoltage is selected by knob | 输出触点16AOutput contact 16A | DC12V | |
| CDV6-116-AD48 | AC/DC24V-48V | |||
| CDV6-116-AD240 | AC/DC110V-240V | |||
| CDV6-116-A220 | AC220V | |||
| CDV6-216-D12 | 同时具有过压和欠压功能It has both overvoltage and undervoltagefunctions | DC12V | ||
| CDV6-216-AD48 | AC/DC24V-48V | |||
| CDV6-216-AD240 | AC/DC110V-240V | |||
| CDV6-216-A220 | AC220V |
| 产品图片 Product picture | 产品型号 Product model | 功能 Feature | 输出触点参数 Output contact parameters | 额定电压 Rated voltage |
| CDV6-316P | ||||
![]() | CDV6-416P | 电压监控继电器/相序保护器 Voltage monitoring relay/phase sequence protector | 输出触点16A Output contact 16A | 220-230-240-380-400 -415-440-460VAC(P-P) |
| CDV6-516P | ||||
| CDV6-616P | ||||
| CDV6-716P CDV6-816P | ||||
| CDV6-316N | 127-132-138-220-230 -240-254-265VAC(P-N) | |||
| CDV6-416N | ||||
| CDV6-516N | ||||
| CDV6-616N | ||||
| CDV6-716N | ||||
| CDV6-816N |
| 产品图片 Product picture | 产品型号 Product model | 功能 Feature | 输出触点参数 Output contact parameters | 额定电压 Rated voltage |
![]() | CDV6-3D08P | 电压监控继电器/相序保护器 Voltage monitoring relay/phase | 220-230-240-380-400 -415-440-460VAC(P-P) | |
| CDV6-4D08P CDV6-5D08P | ||||
| CDV6-6D08P | ||||
| CDV6-7D08P | ||||
| CDV6-8D08P | 输出触点8A | |||
| CDV6-3D08N | Output contact 8A | |||
| sequence protector CDV6-4D08N | 127-132-138-220-230 -240-254-265VAC(P-N) | |||
| CDV6-5D08N CDV6-6D08N | ||||
| CDV6-7D08N | ||||
| CDV6-8D08N |
| 产品图片 Product picture | 产品型号 Product model | 功能 Feature | 监测电流范围 Monitoring current range | 输出触点参数 Output contact parameters |
![]() | CDA6-116A2 | 过流保护 Overcurrent protection | 0.2A-2A | |
| CDA6-116A5 | 0.5-5A | |||
| CDA6-116A8 | 0.8-8A | |||
| CDA6-116A16 | 1.6A-16A | 输出触点16A Output contact 16A | ||
| CDA6-216A2 | 0.5-5A | |||
| CDA6-216A5 | 0.8-8A | |||
| CDA6-216A8 | 1.6A-16A | |||
| CDA6-216A16 | 欠流保护 Undercurrent protection | 1.6A-16A |
Note: The above is a common model reference, not in the table reference selection description.
产品图片Product picture![]() | |||
| 产品型号Product model | 输出触点参数Output contact parameters | 额定电压Rated voltage | |
| CDH48S-1Z | 一组延时继电器输出带复位暂停功能A set of delay relay outputs with reset pause function | 100-240VAC | |
| CDH48S-2Z | 二组延时继电器输出Two sets of delay relay outputs | 100-240VAC | |
| CDH48S-2ZT | 二组延时继电器输出带复位暂停功能Two sets of delay relay output with reset pause function | 100-240VAC | |
| CDH48S-S | 一组循环延时继电器输出带复位暂停功能A set of cyclic delay relay outputs with reset pause function | 100-240VAC | |
| CDH48S-2S | 二组循环延时继电器输出Two sets of cyclic delay relay outputs | 100-240VAC | |
| CDH48S-2ST | 二组循环延时继电器输出带复位暂停功能Two sets of cyclic delay relay output with reset pause function | 100-240VAC | |
| CDH48S-2ZH | 一组延时继电器输出一组瞬动继电器输出A set of time delay relays outputs a set of instantaneous relay outputs | 100-240VAC |
产品图片Product picture![]() | |||
| 产品型号Product model | 输出触点参数Output contact parameters | 额定电压Rated voltage | |
| CDH48M-1Z | 一组延时继电器输出带复位暂停功能A set of delay relay outputs with reset pause function | 100-240VAC | |
| CDH48M-2Z | 二组延时继电器输出Two sets of delay relay outputs | 100-240VAC | |
| CDH48M-2ZT | 二组延时继电器输出带复位暂停功能Two sets of delay relay output with reset pause function | 100-240VAC | |
| CDH48M-S | 一组循环延时继电器输出带复位暂停功能A set of cyclic delay relay outputs with reset pause function | 100-240VAC | |
| CDH48M-2S | 二组循环延时继电器输出Two sets of cyclic delay relay outputs | 100-240VAC | |
| CDH48M-2ST | 二组循环延时继电器输出带复位暂停功能Two sets of cyclic delay relay output with reset pause function | 100-240VAC | |
| CDH48M-2ZH | 一组延时继电器输出一组瞬动继电器输出A set of time delay relays outputs a set of instantaneous relay outputs | 100-240VAC |
产品图片Product picture![]() | 产品型号Product model | 输出触点参数Output contact parameters | 额定电压Rated voltage |
| CDH72M-1Z | 一组延时继电器输出带复位暂停功能A set of delay relay outputs with reset pause function | 100-240VAC | |
| CDH72M-2Z | 二组延时继电器输出Two sets of delay relay outputs | 100-240VAC | |
| CDH72M-2ZT | 二组延时继电器输出带复位暂停功能Two sets of delay relay output with reset pause function | 100-240VAC | |
| CDH72M-S | 一组循环延时继电器输出带复位暂停功能A set of cyclic delay relay outputs with reset pause function | 100-240VAC | |
| CDH72M-2S | 二组循环延时继电器输出Two sets of cyclic delay relay outputs | 100-240VAC | |
| CDH72M-2ST | 二组循环延时继电器输出带复位暂停功能Two sets of cyclic delay relay output with reset pause function | 100-240VAC | |
| CDH72M-2ZH | 一组延时继电器输出一组瞬动继电器输出A set of time delay relays outputs a set of instantaneous relay outputs | 100-240VAC |
Note: The above is a common model reference, not in the table reference selection description.
CSRM-VA
CH6M 计时计数器 Time Counter
选型说明 Model Designation
| 序号 No | 项目 Item | 代号 Code | |
| 说明 Description昌得电气科技有限公司 CNTD | |||
| ① | 公司名称 Company name | C | |
| ② | 系列 Series | H | 计数器/计时器 Counter/timer |
| ③ | 显示位数 Display bit | 6 | 999999(6位 way) |
| ④ | 外形尺寸 Overall dimension | S | DIN W48xH48mm |
| M | DIN W72xH72mm | ||
| ⑤ | 输出 Output | 1P | 1段设置型 1 section setup type |
| 2P | 2段设置型 2 section setup type | ||
| ⑥ | 电源电压 Supply voltage | 4 | 100-240VAC 50/60Hz |
| 2 | 24VAC 50/60Hz 24-48VDC |
CSR 固态继电器 Solid State Relay
选型说明 Model Designation
| 序号 No | 项目Item | 代号 Code | 说明 Description |
| ① | 系列号Serial number | CSRM | 单相固态继电器 CSRM=Single Phase Solid State Relay |
| CSRT | 三相固态继电器 CSRT=Three Phase Solid State Relay | ||
| ② | 额定电流Rated operation current | 40 | 10=10A, 25=25A, 40=40A, 60=60A, 80=80A, 100=100A, 120=120A |
| ③ | 控制和负载电压类型Installation dimension | DA | DA=DC(4-32V)AC(24-380V) |
| AA | AA=AC(80-250V)AC(24-380V) | ||
| DD | DC(4-32V)DC(12-240V) | ||
| VA | 调压器 Voltage regulator(24 380VAC) | ||
| ④ | 特殊规格Special specifications | 无None | 常规过零触发型 Zero Cross Trigger |
| R | 随机触发型 Radom Switch |
CSRM-DA
CSRM-AA
CSRM-DD
CSRT-DA
CSRT-AA
CNTD昌得电气
传感器附件 Sensor Accessory
固态继电器用散热器 State Relay Heatsink
使用注意事项 Using Precautions
我司产品专为工业控制(工控)场合设计与生产,严格遵循工控标准。我们明确声明,除非经过特殊设计并得到我司明确书面确认,我司产品不适用于以下应用场合:
要求极高可靠性的应用场合,包括燃气、电力等要求长期稳定运行的系统。
要求极高安全性的应用场合,包括铁路、电梯、医疗、安全等与人身安全与财产的情况。
苛刻条件、严酷环境的应用场合,包括室外、存在化学污染、电磁、振动或冲击影响的环境。
有火灾或爆炸风险的应用场合,包括存在易燃爆性气体、强酸强碱化学品等物质的环境。
涉及军工用途、大型工程项目的应用场合。
简易版产品资料仅提供产品型号参考和图片,产品详细参数及使用说明请参照产品“产品选型资料”或联系销售代表。
Our company' s products are specifically designed and produced for industrial control scenarios, strictly following industrial control standards. We expressly declare that, unless specially designed and explicitly confirmed in writing by our company, our products are not suitable for the following applications:
Applications that require extremely high reliability, including gas, power, and other systems that require long-term stable operation.
Applications that require extremely high safety, including railroads, elevators, medical, security, and other situations involving personal safety and property.
Harsh conditions and severe environments, including outdoors, environments with chemical pollution, electromagnetic, vibration, or impact influences.
Applications with a risk of fire or explosion, including environments with flammable and explosive gases, strong acids and alkalis, and other substances.
Applications involvingmilitary use, large-scale engineering projects.
Simple version product information only provides product model reference and pictures, product detailed parameters and instructions, please refer to the product“product selection information”or contact sales representatives.
\*为确保您始终获得最准确的产品信息,我们建议在将本产品手册中的任何数据或信息用于正式用途前,先与我们的销售团队进行确认。虽然我们已尽最大努力确保手册内容的准确性,但仍可能存在潜在的数据或信息错误。
\*To ensure that you always receive the most accurate product information, we recommend that you confirm with our sales team before using any data or information from this product manual for official purposes. Although we have made every effort to ensure the accuracy of the content in the manual, there may still be potential errors in data or information.
CNTD
昌得电气科技有限公司CNTD ELECTRIC TECHNOLOGY CO., LTD.
电话:0577-61802222
传真:0577-61802822
邮箱:cntd@cntd.com.cn
地址:浙江省乐清市经济开发区纬十一路258号
Tel:0086-577-62855833
Fax: 0086-577-61802822
Email: cntd@cntd.com
Add.: NO. 258. Wei Eleven Road, Economic
Development Zone, Yueqing City, Zhejiang Province, P.R. China
手册仅供参考
\*昌得电气科技有限公司进行着持续的创新,因此本手册中提供的信息仅供参考。请勿将本手册作为产品安装指南使用。非常规使用场合下的安装、操作和维护请咨询昌得电气科技有限公司的服务人员。
产品正确用法
\*产品应当被使用于一个确保产品运行时各项参数不超过额定值的环境中。产品被使用的系统中的相关风险,应当是受分析且通过多重方案控制的。请勿将产品单独用于例如紧急停止装置等涉及人身安全和财产的场合。
THE CATALOGUE IS FOR REFERENCE ONLY
\* CNTD Electric Technology Co., Ltd. keeps innovating. The information in this catalogue is for reference only. Please do not use the catalogue as a formal installation guide.For installation, operation and maintenance of unconventional applications, please consult the service personnel of CNTD Electric Technology Co., Ltd. for further support.
PROPER USE OF PRODUCT
\*The product must be used in an environment ensures that the product's operating parameters do not exceed the ratingvalue. The risks associated with the system in which the product is used should be analyzed and controlled by multiple measures. Do not singlyuse the product in situations involving personal safety and property safety such as emergency stop device.




















