Applicable Materials:

This machine is suitable for slitting web paper,aluminum foil,tipping paper, textured paper, insulating paper, pet, OPP, CPP, PE, PS, PVC, computer anticounterfeiting labels,electronic and optical materials,composite films,films and various materials after printing.

Main Features:

1. Unwind is equipped with independent shaftless hydraulic feeding, which can bear more than 1500kg.

2. 3-inch air expansion shaft (optional: slip shaft) is adopted for rewinding.

3. Slitting speed: 300m / min.

4. Servo motor drive and PLC system control.

5. Equipped with flat knife and round knife, suitable for slitting film, paper and aluminum foil.

6. There is a receiving platform between the unwind room and the main machine, which is convenient for receiving materials.

7. Equipped with rubber stick, pressing stick and scratch prevention device.

10. Single side rotary unloading structure.

适用材料：

本机适用于卷筒纸、铝箔、水松纸、美纹纸、绝缘纸、PET、OPP、CPP、PE、PS、PVC及电脑防伪标签、电子光学材料、复合膜、胶卷及印刷后之各种材料的分切。

主要特点：

1.放料配有独立无轴液压上料，可承重1500KG以上。

2.收卷采用3英寸气胀轴(可选：滑差轴)。

3.分切速度:300米/每分钟。

4.伺服电机驱动，PLC系统控制。

5.配有平刀，圆刀各，适合于薄膜和纸张、铝箔分切。

6.放料和主机间配有接料台，方便接料。

7.配有胶棍压棍和防刮伤装置。

9.收卷配有卷径自动检测装置。

10.单边旋转式卸料结构。

Application:

The machine is suitable for slitting various roll materials such as kraft paper, double offset paper, coated paper, self-adhesive, white cardboard, book cover paper, gray board paper, web paper, etc., and cutting and cutting the materials according to different needs in the production process.

Performance and Features:

1. The electric braking system of the machine is centrally controlled by PLC. According to the requirements of the cutting process, the cutting parameters are set by the touch screen, and the liquid crystal screen displays the control working state. The control system has the functions of starting buffer, stopping anti loosening, meter counting and length fixing, and the operation is very simple.

2. The unwinding tension control adopts the full-automatic tension control system to keep the unwinding tension constant, and the taper control can also be realized according to the process requirements.

3. The photoelectric automatic deviation correction system is adopted for unwinding and deviation correction, which can automatically "follow the edge" or "follow the line" to ensure the correct feeding position of the substrate.

4. The raw material loading and unloading adopts air roof shaftless clamping and hydraulic lifting structure (optional lifting structure).

5. The main traction and rewinding are respectively controlled by servo motor and driven by frequency conversion. The winding tension is automatically controlled by PLC according to the parameters set according to the slitting process requirements and the change of winding diameter.

6. Gantry type feeding structure is adopted for feeding, which is convenient for operation.

7. Double side big stick friction material receiving, the rewinding shaft is air shaft (optional: slip shaft), and the tension is automatically controlled to adapt to the slitting of multi coil materials with uneven thickness.

8. Hydraulic automatic blanking device is adopted for unloading, which is convenient for customers to unloading quickly.

性能及特点：

1、本机的电器制动系统由PLC集中控制，根据分切工艺要求，由触摸屏设置分切参数，液晶屏显示控制工作状态，控制系统具有启动缓冲、停车防松、计米定长等功能，操作十分简便。

2、放卷张力控制采用全自动张力控制系统，使放卷张力保持恒定不变，也可据工艺要求实现锥度控制。

3、放料纠偏采用光电自动纠偏系统，可自动“跟边”或“跟线”，保证基材走料位置正确。

4、原料装卸采用气顶式无轴装夹和液压升降结构(升降结构选配)。

5、主牵引及收卷分别由伺服电机控制、变频驱动。收卷张力由PLC根据分切工艺要求设定的参数和收卷直径的变化，按数字化锥度方式自动控制。

6、过料采用龙门式过料结构，方便操作。

7、双边大棍摩擦收料，收卷轴为气胀轴(可选：滑差轴)，张力自动控制，适应厚度不均匀的材料进行多盘卷的分切。

8、下料采用液压式自动下料装置，方便客户快速下料。

检测速度50-400米/分钟Detection Speed 50-400 m/min

Application:

The machine is suitable for the post press inspection of various roll materials such as BOPP, pet, PVC, PE, aluminum foil, aluminized film, web paper and composite film, and the elimination of various phenomena such as missing printing and deinking in the production process.

用途:

该机适用于BOPP、PET、PVC、PE、铝箔、镀铝膜、卷筒纸、复合膜等各种卷状材料的印后检验、在生产过程中对各种漏印、脱墨等现象进行剔除。

主要技术参数/Main Technical Parameter

Performance and Features:

1. The electric braking system of the machine is centrally controlled by PLC. According to the requirements of the cutting process, the cutting parameters are set by the touch screen, and the liquid crystal screen displays the control working state. The control system has the functions of starting buffer, stopping anti loosening, meter counting and length fixing, and the operation is very simple.

2. The raw material loading and unloading adopts air roof type shaftless clamping and hydraulic lifting structure.

3. The unwinding tension control adopts the full-automatic tension control system to keep the unwinding tension constant, and the taper control can also be realized according to the process requirements.

4. The "photoelectric deviation correction" system can be used to ensure the correct position of the base material and automatic tracking and setting out.

5. The main traction and winding are respectively controlled by servo motor and driven by frequency conversion. The winding tension is automatically controlled by PLC according to the parameters set according to the slitting process requirements and the change of winding diameter.

6. Full automatic camera tracking, alarm immediately in case of any problem;

7. The rewind adopts air top type shaftless clamping and hydraulic lifting structure.

性能及特点：

1、本机的电器制动系统由PLC集中控制，根据分切工艺要求，由触摸屏设置分切参数，液晶屏显示控制工作状态，控制系统具有启动缓冲、停车防松、计米定长等功能，操作十分简便。

2、原料装卸采用气顶式无轴装夹和液压升降结构。

3、放卷张力控制采用全自动张力控制系统，使放卷张力保持恒定不变，也可据工艺要求实现锥度控制。

4、放料纠偏采用光电自动纠偏系统，可自动“跟边”或“跟线”，保证基材走料位置正确。

5、主牵引及收卷分别由伺服电机控制、变频驱动。收卷张力由PLC根据分切工艺要求设定的参数和收卷直径的变化，按数字化锥度方式自动控制。

6、全自动摄像头式跟踪，发现问题立即报警。

7、收料采用气顶式无轴装夹和液压升降结构。

Substrate Material:

This machine applies to slit :Film, VMCPP、PET, OPP, CPP, PS, PVC, PE, optical material, Roll paper and packing materials.

分切材料：

塑料薄膜、镀铝膜、PET、OPP、CPP、PS、PVC、PE、光学材料、卷筒纸等各种软包装材料。

Slitting Products 分切样品

主要技术参数/Main Technical Parameter

BFWFQ-A Series

Horizontal Slitting Machine系列卧式分切机

Substrate Material:

It is suitable for:Roll paper、Non-woven fabric、Film、VMCPP、Adhesive sticker、Aluminum and so on, which material in rolls.

分切材料：

卷筒纸、不干胶、塑料薄膜、无纺布、镀铝膜、铝箔等各种软包装材料。

Part FOUR 配套设备解决方案 Supporting Equipment Solution

KSTB-A Series
Plate Mounting Machine
系列视频贴版机 54/54
KSTB-S Series
Series Sleeve Plate Cylinder Mounting Machine
系列视频贴版机 55/55
KSQX-A Series
Ultrasonic Ceramic Anilox Roller
系列超声波陶瓷辊清洗机 56/56
KSZB-A Series
Plate Making Machine
系列晒版机 57/57
Other Supporting Series
其它配套系列 58/58

KSTB-A Series

Plate Mounting Machine系列视频贴版机

Product Description

1. Employed up-and-down adjustable precise screw nuit. Japanese SINCO high grade amplified lens. ČCD camera. HF liquid crystal monitor fir displayer.

2. Adopted upper and down adjustable japanese SINCO high-grade amplifier. CCD camera and HD liquid crystal monitor for its displayer.

3. The camera can be adjusted in all directions. Higher precision of printing plating adhesion and accurate registering.

4. The printing plate can be stuck in telescope

5. Faster sticking the printing plate. Ease of operation.Higher production capacity.

6. Applied to printing the relief printing materials like soft rotary printing and resin printing.

产品性能：

1、左右定位采用精密直线导轨，镜头上下高低可调，采用精密螺杆机构，(台湾上银牌的精密直线导轨)

2、高级放大定焦镜头、高清晰CCD摄像头、液晶显视器显示。(台湾敏通摄像机、台湾的亚洲光学的光学镜头、韩国三星19寸液晶显视器)

3、摄像头可六方向调节，平行度可调，贴版精度高，套色准。对版采用机械微调机构，可精确的移动印版与基准线的对位，保证每块版的相同位置和精度.

4、特制的压版辊，使印版和双面胶密接，可靠又实用。

5、贴完印版后可以直接检查贴版精度，保证贴版质量。

6、快速贴版，操作便捷，工作效率大大提高。

7、适用于柔版轮转印刷和树脂版等凸版印刷。

套筒版辊 Sleeve Plate Cylinder

产品功能与特征：

1、选用水基加少许添加剂作为清洗剂，成本低廉，清洗效果好，是最理想、最实惠的清洗设备；

2、全进口加厚不锈钢耐酸碱，美观耐用；

3、自动恒温系统30-80℃可调；

4、分体式结构、维护方便、经久耐用；

5、清洗机内槽采用进口优质不锈钢；

6、清洗机的降音盖、外壳采用优质不锈钢。

Features of Ultrasonic Anilox Cleaner

Cleaning rollers,anilox,ceramic anilox,metal anilox in various industries tank made of 2MM thick 316L stainless steel, resistant to acid, alkali corrosion.Motor rotation system to drive the anilox suitable for ceramic anilox/ metal anilox with overflow protection and water drain system.Tank and shell made of quality stainless steel.Po Professional testing, quality assurance.Build-in timer,temperature controller and counter down buzzer high quality components,clear circuit perfect to clean roller,anilox integrated design,easy maintenance. Customized design and configuration are ok.

KSZB-A Series

Plate Making Machine系列晒版机

Main Features

1.It is made of stainless steel,featuring in durability and won\`t get rusty.

2.Adopted imported Philip specific printer lamp,Philip rectifier(frequency transforming type is good for registering).

3.Imported slow reflective violet suction membrane(Japan Toyo).

4.Computer controller enables it to be easily operated.

5.Adopted American digital integrated thermo sensor.

6.Adopted American thermo sensor.

7.Japanese Panasonic or oriental printing plate washer,Japanese ORIX constant dry oven, featuring in strong wind.

8.Adopted Philip specific UVC light source for removing the sticking sheet.

9.Integrated exposure,washing printing plate and removing sheet,it is a good equipment for making soft printing plates.

主要特点

1、全不锈钢外壳，经久耐用，永不生锈。

2、采用进口原装菲利浦专用晒版灯，菲利浦镇流器(变频式对制版非常有利)。

3、进口(日本东洋纺)漫反射紫外线抽气膜。

4、电脑全自动控制，使用方便。

5、采用美国进口的数字集成温度传感器。

6、全自动洗版机构。

7、日本松下(或东方)的洗版电机，日本(ORIX)恒温烘干风刀吹力强、烘干快。

8、去粘采用进口菲利浦的专用UVC光源。

9、集曝光、洗版、烘干、去粘于一体，是制柔版的理想设备。

本公司有权保留对机器外观以及技术参数的修改，恕不另行通知。 We reserves the right to modify the appearance and technical parameters of the machine without notice.

hugh@cnp-j.com

www.pujiflexo.com

15325777338

微信

WhatsApp