该页无缩略图
| 北塔自攻螺丝North Tower Self-tapping Screw | |||||||||
| 型号Model | 尖钉Spike | 付1 inch | 2寸2 inch | 3寸3 inch | 4寸4 inch | 5寸5 inch | 6寸6 inch | ||
| 长度（带胶介）Length | 16 | 22 | 36 | 47 | 61 | 72 | 97 | ||
| 长度（不带胶介）Length | 18 | 24 | 38 | 49 | 63 | 74 | 99 | ||
| 果帘w | 大原螺丝Dayuan Screw | ||||||||
| 型号Model | 尖钉Spike | 1付1 inch | 2寸2 inch | 3寸3 inch | 4寸4 inch | 5寸5 inch | 6寸6 inch | ||
| 长度（带胶介）Length | 15 | 20 | 34 | 43 | 59 | 69 | 90 | ||
| 长度（不带胶介）Length | 17 | 22 | 36 | 45 | 62 | 71 | 92 | ||
| 合 | 尼龙头/不锈钢螺丝Nylon / stainless steel screw | ||||||||
| 型号Model | 付1 inch | 2寸2 inch | 3寸3 inch | 1寸1 inch | 2寸2 inch | 3寸3 inch | |||
| 长度（带胶介）Length | 21 | 45 | 70 | 22 | 47 | 72 | |||
| 长度（不带胶介）Length | 23 | 47 | 72 | 24 | 49 | 74 | |||
参考角度 α = 5 3 ^ { \circ } β = 1 4 5 ^ { \circ }
彩钢配件大样图 Color steel fittings large pattern
01常规外屋脊
02常规滴水线
03常规门窗包边
04常规内屋脊
200
1、5%坡度<8% 则 β = 1 7 5 ^ { \circ }
2、8%坡度<15%则 β = 1 7 2 ^ { \circ }
3、15%坡度<20%则 β = 1 6 5 ^ { \circ }
4、20%坡度<30%则 β = 1 4 0 ^ { \circ }
05常规泛水板
50咬口板包边剪宽=320mm
75 咬口板包边剪宽=345mm
100咬口板包边剪宽=370mm
涂装保温板 / Coating insulation panel 〉 53|54
机制外墙板
手工板带偏心钩
内发泡聚氨酯板 Internal foamed polyurethane panel
产品特征：
1. 凹凸槽结构，提高了板材接缝处绝缘气密性，专为冷藏室、仓库设计。
2. 板材均匀稳固，隔热性能、防水性能极佳。
3. 自重轻，外观优美，有效解决冷藏工业温差。
4.在一定的模数内，库体可在长、宽、高三个方向自由变化，能够依需要扩大或缩小，也可将拼装板折开，异地再装，安装简易快捷。
产品规格：
常规厚度：
50mm, 75mm, 100mm, 125mm, 150mm
常规尺寸：按图纸设计尺寸。
芯材：聚氨酯内发泡。
阻燃级别：B1或B2
安装结构：锁钩搭接
详细说明：
1.保鲜库(保鲜库温度保持在0℃，冷库板的最佳厚度为10公分）保鲜库最大限度地保持一些农产品原有的品质和新鲜度，就是鲜活的农产品，在保鲜贮藏一段时间后，仍然是刚采摘或接近刚采摘时的鲜活状态和品质。
2. 冷藏库(冷藏温度保持在-18℃，冷库板的适宜度为15公分)冷藏库主要作对食品，乳制品、肉类、水产、禽类、果蔬、冷饮、花卉、绿植、茶叶、药品，化工原料，电子仪表器等的恒温贮藏。
3.冷冻库(冷藏温度保持在-38℃，冷库板的适宜厚度为20公分）冷冻库冷库主要用于食品、药品、机械的冷冻加工及冷藏，它通过人工制冷，使室内保持一定的低温。
Characteristics:
1. Structure of concave and convex chamfer, improve the insulation plate the joint air tightness, designed for cold storage, warehouse.
2. Plate uniform solid, excellent insulating performance, waterproof performance.
3. Light weight, beautiful appearance, effectively solve the temperature refrigeration industry.
4. Within a module, the library body length, width and height on three directions free of change, can be in accordance with the need to expand or narrow, also can be assembled plate apart, different reload, installation simple and fast.
Specification:
Regular thickness:
50mm, 75mm, 100mm, 125mm, 150mm
Regular size: Design dimensions by drawing.
Core material: polyurethane foaming.
Flame retardant level: B1 or B2
Mounting structure: hook hook
Detailed description:
1. Refreshment storage (which can remain at 0C temperature, cold storage board the best thickness of 10cm) Which can maximize keep some original quality and freshness of agricultural products, is the fresh agricultural products, in the preservation storage after a period of time, is still the fresh-cut or living condition and quality of fresh-cut.
2. Cold storage (cold storage temperature kept at-18℃, the suitable thickness of cold storage board is 15cm) A cold storage is mainly used for the food, dairy products, meat, aquatic products, poultry, fruits and vegetables, cold drinks, flowers, green plant tea, medicine, chemical raw materials, such as electronic instrument of constant temperature storage.
3. Freezer storage (cold storage temperature keptat-38℃, the suitable thickness of cold storage board is 20cm) Freezer refrigerator is mainly used in food, medicine, machinery of frozen processing and cold storage, it by artificial refrigeration, make indoor low temperature is constant.
岩棉烤炉保温板
Rock wool oven insulation panel
产品特征：
彩钢岩棉窑炉板因在工厂中通过自动化设备将岩棉和钢板复合成一个整体，从而改变了以往炉板需人工现场复合的方式，在满足建筑物保温隔热，隔声，防火等要求的前提下，更达到了优质、高效、可靠、安全的目标。该产品在涂装设备中的应用，已成熟完善。
产品规格：
常规厚度：
50mm, 75mm, 100mm, 125mm, 150mm
有效宽度：1150mm
常规长度：按用户需要及工程要求而定尺寸生产。
面板厚度：>0.5mm
面板种类：
镀锌板、不锈钢板、彩钢板。
芯材：岩棉(容重为60-130kg/m³).
产品应用：
岩棉窑炉板作为涂装设备的配套产品，广泛适用于防火和保温要求高的大、中型涂装流水线的烘干道、烤箱、烤炉、烤漆房、隧道炉等。
Characteristics:
Rock wool tunnel furnace panel can be combined into a whole with rock wool and plate by the automatic equipment nowadays, thuschange the situation of manually assembling on spot as before, on the premise of good fireproof and sound insulation, it achieveshigher quality, more reliability, more safety, The application in coating filed is coming mature.
Specification:
Regular thickness:
50mm, 75mm, 100mm, 125mm, 150mm
Effective width: 1150mm
Regular length: It depends on the project requirement and transportation condition.
The plate thickness: >0.5mm
Plate type:
Galvanized steel plate, Stainless steel plate, Color steel plate.
Core material: rock wool (density is 60 130kg/m³).
Applications:
Widely in used big, medium-sized coating line, drying room, oven, baking room, tunnel furnace as the coating equipmentsupporting.
不锈钢烘道板
Stainless steel rock wool insulation panel
产品规格：
常规厚度：
50mm,75mm,100mm,125mm,150mm, 200mm(预订)。
产品类别：1150型。
现货不锈钢厚度：
0.4mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm。
表面工艺:
2B面、磨砂、镜面
产品参数：
有限宽度为1.15米，长度按客户要求定做；采用双面不锈钢的烘道板保温效范围在280度以上，具有极强的抗腐蚀性，具体可咨询。
结构优点：企口型拼接，中间内置硅酸铝棉。
产品应用：
不锈钢岩棉烤炉板主要是应对更高的炉体温度和具有一定腐蚀性的烘烤线。
Specification:
Regular thickness:
50mm, 75mm, 100mm, 125mm, 150mm, 200mm(Booking).
Product category: Type 1150.
Regular stainless: 0.4mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm 1.0mm.
Surface technology:
2B face, matte, mirror.
Regular parameter:
The effective width is 1.15m, the length is customized according to customer's requirements. The heat preservation efficiency of the double-sided stainless steel is over 280 degrees, which has strong corrosion resistance and can be consulted specifically.
Installation structure: male and female joint, built-in aluminum silicate cotton in the middle.
Applications:
Stainless steel rock wool baking panel is mainly to cope with higher furnace temperature and a certain corrosive baking line.
包边及关键节点图 Edge and key node diagram
炉口包边
冲孔吸音板 / Punching sound absorbing panel > 57|58
三排冲消音板
Three rows of punching and sound absorbing panels
产品特征：
良好的降噪性能是现代建筑个重要的考虑因素，通过改变保温芯材的品种以及表面钢板的冲孔处理，达到降低建筑物内外噪音的目的。
在吸音材料上有多种方案可供选择，例如岩棉、玻璃丝棉。改变保温芯材的品种和密度，以降低引发在金属表面的碰撞噪声,通过芯材降噪的隔音棉来抑制共振产生的噪声。
通过在金属钢板上有规律的穿孔和板材内的吸音材料的结合，产生不同的吸音效果。通过实验，这种降噪效果依据外源噪音的频率和芯材的厚度，产生不低于29分贝的降噪效果。
型号：
屋面板型号:950公母口型，1050咬口型(详见屋面板彩页)
墙板型号：950型，1150型
板面冲微孔处理：
微孔直径2.5mm，微孔中心孔距5mm，并成60度角排列。
Characteristics:
Good noise absorption performance is an important factor for modern architecture, it can reduce the noise of the inside and outside of the buildings through the punching process on the surface of steel plate or changing the insulating core material.
The optional sound-absorbing material, such as rock wool, glass wool. Change the core material type and density to reduce noise caused by the collision of metal surface.
Through the experiment, the effect of noise reduction depends on the noise frequency and the core material thickness. By both changing the sound-absorption material and punching on the plate can reduce more than 29DB.
Type:
The roof panel type: 950 male and female joint, 1050 Seaming over lapping joint (former pages).
The wall panel type: 950 male and female joint, 1150 male and female joint.
Punching holes processon the surface of the panel:
The hole diameter is 2.5mm, hole distance is 5mm, and a 60 degree angle arrangement.
吸声参数图表：
| 频率(赫兹) | 50mm岩棉夹芯板 | 100 | 125 | 160 | 200 | 250 | 315 |
| 吸声系数 | 50mm玻璃丝棉夹芯板 | 0.34 | 0.39 | 0.6 | 0.83 | 0.78 | 0.57 |
| 0.20 | 0.25 | 0.47 | 0.71 | 0.78 | 0.76 | ||
| 频率(赫兹) | 50mm岩棉夹芯板 | 400 | 500 | 630 | 800 | 1000 | 1250 |
| 吸声系数 | 50mm玻璃丝棉夹芯板 | 0.98 | 1.11 | 1.18 | 0.97 | 1.3 | 0.97 |
| 1.03 | 1.02 | 1.19 | 0.98 | 0.90 | 0.86 | ||
| 频率(赫兹) | 50mm岩棉夹芯板 | 1600 | 2000 | 2500 | 3150 | 4000 | 5000 |
| 吸声系数 | 50mm玻璃丝棉夹芯板 | 0.88 | 0.90 | 0.90 | 0.97 | 1.02 | 1.11 |
| 0.81 | 0.88 | 0.98 | 0.99 | 1.08 | 1.08 |
1.隔音测试环境20℃，湿度50%，吸声测试环境为14℃，湿度50%。
2.参数均为50mm（冲孔）夹芯板实验测试数据。
3.采用混响法测得的吸声系数会大于1，因为吸收的能量波是多次叠加的结果。
全冲孔消音板Full punching silencer
产品特征：
手工消音板作为机制消音板的补充，冲孔率可达到100%，外观更美观，在工业房消音中具有更广阔的前景，消音效果的好坏，取决于噪音的频率大小，理论上按平均值50mm内置岩棉可产生不低于29分贝的降噪效果。为了提高隔音效果，可增加墙板的厚度和吸音棉的密度来实现，同时也会带来很多缺点：
1）墙板越厚，占用的空间就越多。
2)墙板越重，安装越困难；还需要考虑楼层能否承受的问题。
3）墙板越厚越重，生产墙板用到的原材料越多，墙板价格越高，安装费用也就越高，导致最后工程的综合造价越高。
Characteristics:
As a supplement to the machined panel, the punching rate of hand made panel can reach 100%, the appearance is more beautiful, and it has a broader prospect in industrial industry.
The muffling effect depends on the frequency of noise. In theory, the built-in rock wool with an average value of 50 mm can produce a noise reduction effect of not less than 29 decibels.
In order to improve the sound insulation effect, it can increase the thickness of panel and the density of core material, At the same time, it will bring many shortcomings:
1) The thicker the thicker, the more space it occupies .
2) The heavier the panel is, the more difficult it is to install it; it is also necessary to consider whether the floor can bear it.
| 3) The thicker and heavier the panel is, the more raw materials are used to produce the panel. The higher the panel price is, the higher the installation cost is, which leads to the higher comprehensive cost of the final project. | |
| 常规型号： 1180型，980型，非标型 | Regular type: 1180mm 980 type Non-standard type |
| 产品规格： | Specification: |
| 常规厚度：50mm，75mm，100mm 常规长度：按项目要求定做 芯材：岩棉，玻璃棉 安装结构：公母接头 | Regular thickness: 50mm, 75mm, 100mm Length: It depends on the project requirement and transportation condition. Core material available: Rock wool, Glass wool Installation structure: male and female joint |
| 板面冲微孔处理： 微孔直径2.5mm，微孔中心孔距5mm，并成60度角排列。 | Punching holes processon the surface of the panel: The hole diameter is 2.5mm, hole distance is 5mm, and a 60 |
玻璃棉夹芯板Glass wool sandwich panel
| 产品特征：玻璃棉夹芯板质轻，防火性能卓越，并具备一定的保温性能，易于搬运，安装。 | Characteristics:Glass wool sandwich panel is light in weight, excellent infireproofing performance, and has certain heat preservationperformance. Easily Installation and removing. |
| 产品规格：常规厚度：50mm, 75mm, 100mm, 125mm, 150mm有效宽度：950mm，1150mm常规长度：按用户需求运输条件定尺寸生产。 | Specification:Regular thickness:50mm, 75mm, 100mm, 125mm, 150mmEffective width: 950mm, 1150mmRegular length: It depends on project'srequirement andtransportation condition. |
| 产品特性：玻璃棉具有超过600度的耐火能力，50mm厚的防火时间为60分钟。 | Characteristic:Glasswool has a fireproof ability of over 600 degrees, and thefireproof time of 50 mm thickness is 60 minutes. |
| 产品应用：广泛应用于活动板房，集装箱房等大型临时性建筑上。 | Applications:It is widely used in prefab houses, container rooms, and otherlarge temporary buildings. |
950型彩涂小波浪 950 type painted small waves
| 产品规格： 常规厚度： 50mm, 75mm, 100mm 有效宽度：950mm 常规长度：按用户需要，工程要求及运输生产。 | Specification: Regular thickness: 50mm, 75mm, 100mm |
| 产品特性： 可用芯材：泡沫，玻璃棉，岩棉，酚醛。 安装结构：企口型拼接。 | Characteristic: Core material available: Foam, polyurethane, rock wool. PhenolicInstallation structure: male and female joint. |
| 产品应用： | Applications: |
| 广泛适用于大跨度组合钢结构及网架工程。如：体育馆，影剧 院，大型厂房会议中心，礼堂等屋面部分。 | Widely used in big span combined steel structure and grid structure etc.E.g. Roof for gymnasium, cinema, large factory building, conference center, auditorium etc. |
1150型镀锌大波浪 1150 type galvanized large wave
| 产品规格：常规厚度：50mm, 75mm, 100mm有效宽度：1150mm常规长度：常规侧板2750mm，顶板2900mm。 | Specification:Regular thickness:50mm, 75mm, 100mmEffective width: 1150mmRegular lenth: wall 2750mm, roof 2900mm. |
| 产品特性：可用芯材：泡沫，玻璃棉，岩棉，酚醛。安装结构：企口型拼接。 | Characteristic:Core materialavailable: Foam, polyurethane, rock wool.PhenolicInstallation structure: male and female joint. |
| 产品应用：集装箱房专用板，表面镀锌，内不彩涂，客户根据需求喷涂颜色。 | Applications:Special panel for container house, with galvanized surface andcolorless interior. Customers can spray color according to theirneeds. |
保温型
聚苯乙烯（性能参数）
| 名称 | 单位 | 参考值 |
| 容重（密度） | kg/m^³ | ≥8 |
| 导热系数λ | w/m.k | ≤0.045 |
| 吸水率 | kg/m2 | ≤2 |
| 水蒸气透温系数 | w/m.k | <4.5 |
| 尺寸稳定性 | % | ≤3 |
| 燃烧性能等级 | 级 | B2级 |
| 名称 | 单位 | 参考值 |
| 容重（密度） | kg/m^³ | ≥38 |
| 导热系数λ | w/m.k | ≤0.028 |
| 吸水率 | kg/m2 | ≤1.5 |
| 水蒸气透温系数 | w/m.k | <3.5 |
| 尺寸稳定性 | % | ≤2 |
| 燃烧性能等级 | 级 | B2级 |
聚氨酯（性能参数）
| 名称 | 单位 | 参考值 |
| 容重（密度） | kg/m³ | ≥38 |
| 导热系数λ | w/m.k | ≤0.024 |
| 抗压强度 | Mpa | ≤0.2 |
| 闭孔率 | % | ≥90% |
| 吸水率 | kg/m^2 | ≤0.2 |
| 不透水性 | min(0.5pa) | 保持时间≥30 |
| 尺寸稳定性 | % | ≤0.2 |
| 燃烧性能等级 | 级 | B2级 |
防火型
| 名称 | 单位 | 参考值 |
| 容重（密度） | kg/m³ | ≥45 |
| 纤维平均直径 | μm | ≤8 |
| 热荷重收宿温度 | ℃ | 480 |
| 导热系数 | w/m.k | 0.042 |
| 吸湿率（重量比） | % | 0.3 |
| 燃烧性能等级 | 级 | A级 |
防火型
玻镁（性能参数）
| 名称 | 单位 | 参考值 |
| 容重（密度） | $k g / m ^ { 3 }$ | ≥850 |
| 导热系数λ | w/m.k | ≤0.216 |
| 吸水率 | kg/m^2 | ≤8 |
| 湿涨率 | % | ≤0.6 |
| 抗折强度 | Mpa | >16 |
| 抗冲击强度 | kj/m^2 | >5.5 |
| 燃烧性能等级 | 级 | A1级 |
| 名称 | 单位 | 参考值 |
| 容重（密度） | kg/m³ | ≥60-150 |
| 纤维平均直径 | μm | 5 |
| 渣球含量 | % | ≤4 |
| 导热系数λ | w/m.k | 0.041 |
| 吸湿率（重量比） | % | <1 |
| 溶化温度 | % | ≤5 |
| 老化膨胀率 | ℃ | >1000 |
| 燃烧性能等级 | 级 | A级 |
硫氧镁（性能参数）
| 名称 | 单位 | 参考值 |
| 容重（密度） | kg/m2 | 17 |
| 纤维平均直径 | w/m.k | ≤0.07 |
| 渣球含量 | 级 | AQ1 |
| 导热系数λ | kN/m² | ≥4.16 |
| 吸湿率（重量比） | db | 32 |
| 溶化温度 | 级 | A1 |
面材介绍
Face material introduction
彩涂钢板的特征
Characteristics of painted steel plate
在钢板上涂上有机涂料，表面衬以不同的颜色，俗称彩板。其基板可以分成冷轧基板、热镀锌基板、电镀锌基板和热镀铝锌基板。
面漆淙层种类可以分成：聚酯、硅改眭聚酯、高耐久性聚酯和偏
聚氯乙烯等，其颜色有多种。彩淙板表面状态分成涂层板、压花扳、
印花扳。用作金属夹芯板表面的钢板还有不锈钢板、铝板和植绒钢板
等，常用厚度范围在03mm-12mm。ル
锌铁合金层Zinc-Iron Alloy Coat
热镀锌层 Hot-Dip Galvanized Coat
印花装饰彩涂系列
Print decorative color coating series
常用色系 Product color card
注:本资料图片由于印刷关系，仅供参考，请以实物为准。
Note: all pictures in the manual are for reference only,please in kind prevail.
广东省联和冠业彩钢板有限公司FSSTEEL BOARD-MANUFACTURING GUANGDONG CO.,LTD
