该页无缩略图
FA TYPEDUST SEAL RING
Product application:Used for dust prevention of the piston rods of reciprocatinghydrauliccylinders.
NBRhardness: { { H S } } 7 5 ^ { \circ } { \bf A } PUhardness: { { H S } } 8 5 ^ { \circ } { \bf A } Standard source:GB10708.8-86 Groove compliance:GB6578-86
| Specnicatron | Speenlcation | Specnication | Speerication |
| 8x18x4/7 | 60×74×6/11 | 145×165x7/13 | 245×265×7/13 |
| 10×20×4/7 | 63×77×6/11 | 150×170×7/13 | 250×270×7/13 |
| 12×22×4/7 | 65×79×6/11 | 155×175×7/13 | 255×275×7/13 |
| 14×24×4/7 | 70×84×6/11 | 160×180×7/13 | 260×280×7/13 |
| 16×26×4/7 | 75×89×6/11 | 165×185×7/13 | 265×285×7/13 |
| 18×28×4/7 | 80×94×6/11 | 170×190×7/13 | 270×290×7/13 |
| 20×32×5/9 | 85×99×6/11 | 175×195×7/13 | 275×295×7/13 |
| 22×34×5/9 | 87×101×6/11 | 180×200×7/13 | 280×300×7/13 |
| 25×37×5/9 | 90×104×6/11 | 185×205×7/13 | 285×305×7/13 |
| 28×40×5/9 | 92×106×6/11 | 190×210×7/13 | 290×310×7/13 |
| 30×42×5/9 | 95×109×6/11 | 195×215×7/13 | 295×315×7/13 |
| 32×44×5/9 | 100×114×6/11 | 200×220×7/13 | 300×320×7/13 |
| 35×47×5/9 | 105×121×7/13 | 205×225×7/13 | 310×340×10/19 |
| 36×48×5/9 | 110×126×7/13 | 210×230×7/13 | 315×345×10/19 |
| 38×50×5/9 | 115×131×7/13 | 215×235×7/13 | 320×350×10/19 |
| 40×52×5/9 | 120×136×7/13 | 220×240×7/13 | 325×355×10/19 |
| 45×57×5/9 | 125×141×7/13 | 225×245×7/13 | 340×370×10/19 |
| 50×62×5/9 | 130×146×7/13 | 230×250×7/13 | 350×380×10/19 |
| 52×64×5/9 | 135×151×7/13 | 235×255×7/13 | |
| 55×69×6/11 | 140×160×7/13 | 240×260×7/13 | |
| Specification | Specification | Specification | Specification |
| 20×28x5/8 | 60×68x5.3/7.5 | 90×100×6/9 | 137×147×6/10 |
| 25×33×5/7 | 60×70×6/9 | 100×110×6/9 | 140×155×9.5/13 |
| 28×36×5/7.5 | 63×73×6.3/9 | 100×115×9/13 | 150×165×4.8/10 |
| 36×44×5/7.5 | 65×75×6.3/9 | 110×120×6/10 | 160×175×93.5/13 |
| 36×46.5×/10 | 70×80×6/9 | 110×125×9.3/13 | 180×195×9/12.5 |
| 40×48×5/7 | 70×80×6/11 | 120×135×9.3/13 | 185×205×7/13 |
| 50×58×5/7 | 80×90×6/9 | 125×140×9.5/13 | 190×205×9.5/14 |
| 55×65×63/9 | 85×95×6.3/9 | 135×150×95/13 | 200×215×9.5/14 |
DHSTYPEDOUBLE-ACTINGDUST-PROOFSEALINGELEMENT
Purpose:The DHS double-acting dust seal is used to protect the oil cylinder from dust entryand improve the system's sealing effect.
Hardness:90A Speed:Maximum1m/s @
| DHSRubber | ||
| Specification | Specification | Specification |
| 11.2×19.2×4.5/6 | 53×61×5/6.5 | 120×133×7/9.5 |
| 12.5×20.5×4.5/6 | 55×63×5/6.5 | 125×138×7/9.5 |
| 14×22×4.5/6 | 56×64×5/6.5 | 130×143×7/9.5 |
| 16×24×4.5/6 | 60×68×5/6.5 | 136×149×7/9.5 |
| 18×26×4.5/6 | 63×71×5/6.5 | 140×153×7/9.5 |
| 20×28×4.5/6 | 65×73×5/6.5 | 145×158×7/9.5 |
| 22×30×4.5×/6 | 67×75×5/6.5 | 150×163×7/9.5 |
| 22.4×30.4×4.5/6 | 70×80×6/8 | 155×167×7/9.5 |
| 23.5×31.5×4.5/6 | 71×81×6/8 | 160×174×7/9.5 |
| 25×33×4.5/6 | 75×85×6/8 | 165×179×7/9.5 |
| 28×36×4.5/6 | 80×90×6/8 | 170×184×7/9.5 |
| 30×38×5/6.5 | 85×95×6/8 | 175×189×7/9.5 |
| 31.5×39.5×5/6.5 | 90×100×6/8 | 180×194×7/9.5 |
| 32×40×5/6.5 | 95×105×6/8 | 190×204×7/9.5 |
| 35×43×5/6.5 | 98×108×6/8 | 200×214×7/9.5 |
| 35.5×43.5×5/6.5 | 100×110×6/8 | 204×218×7/9.5 |
| 36×44×5/6.5 | 105×115×6/8 | 210×224×7/9.5 |
| 40×48×5/6.5 | 110×120×6/8 | 220×234×7/9.5 |
| 45×53×5/6.5 | 112×122×6/8 | 230×244×7/9.5 |
| 50×58×5/6.5 | 115×125×6/8 | 250×264×7/9.5 |
DHSTYPEDOUBLE-ACTINGDUST-PROOFSEALINGELEMENT
| DHS PU | ||
| Specification | Specification | Specification |
| 19×26×2.5/4 | 25.4×34.85×4.75/7.95 | 12×20×5/7 |
| 25×34×3/4 | 20×30×5/6 | 26×32×5/7 |
| 18.5×26×3.2/4 | 25×35/5/6 | 207×217×5/7 |
| 5×10×3.5/5 | 14×20×5/6.5 | 55×65×5/7.5 |
| 12×18×3.5/4.8 | 30×38×5/6.5 | 25×34×5/8.5 |
| 18×24×3.5/5.5 | 31×39×5/6.5 | 88×100×5/11 |
| 14×20×3.6/4.8 | 31.5×39.5×5/6.5 | 70×80×5.3/6.8 |
| 18×24×4/6 | 31.5×41.5×5/6.5 | 80×90×5.3/6.8 |
| 20×27×4/6 | 32×40×5/6.5 | 50×60×5.3/7 |
| 32×40×4.5/5.8 | 35×41×5/6.5 | 50×58×5.3/8 |
| 9x14×4.5/6 | 35×43×5/6.5 | 50×60×5.5/8.5 |
| 10×20×4.5/6 | 35×44×5/6.5 | 70×80×5.5/8.5 |
| 11.2×19.2×4.5/6 | 35.5×35×5/6.5 | 80×90×5.5/8.5 |
| 12×18×4.5/6 | 36×44×5/6.5 | 90×100×5.5/8.5 |
| 12×20×4.5/6 | 38×46×5/6.5 | 100×110×5.5/8.5 |
| 12.5×20.5×4.5/6 | 40×48×5/6.5 | 110×120×5.5/8.5 |
| 14×22×4.5/6 | 40×50×5/6.5 | 130×140×5.5/8.5 |
| 15×21×4.5/6 | 45×53×5/6.5 | 150×160×5.5/8.5 |
| 16×22×4.5/6 | 48×56×5/6.5 | 35×43×6/8 |
| 16×24×4.5/6 | 50×58×5/6.5 | 35×45×6/8 |
| 18×26×4.5/6 | 50×61.8×5/6.5 | 47×58×6/8 |
| 19×27×4.5/6 | 53×61×5/6.5 | 55×65×6/8 |
| 20×28×4.5/6 | 55×63×5/6.5 | 70×80×6/8 |
| 22×28×4.5/6 | 56×63×5/6.5 | 70×82×6/8 |
| 22×30×4.5/6 | 56×64×5/6.5 | 71×81×6/8 |
| 22.4×30.4×4.5/6 | 58×66×5/6.5 | 71×82×6/8 |
| 23.5×31.5×4.5/6 | 60×68×5/6.5 | 72×82×6/8 |
| 24×32×4.5/6 | 60×71×5/6.5 | 75×85×6/8 |
| 25×33×4.5/6 | 63×71×5/6.5 | 80×90×6/8 |
| 27×35×4.5/6 | 65×73×5/6.5 | 80×92×6/8 |
| 28×36×4.5/6 | 67×75×5/6.5 | 85×95×6/8 |
| 32×40×4.5/5.8 | 60×71×5/6.5 | 88×98×6/8 |
DHSTYPEDOUBLE-ACTINGDUST-PROOFSEALING ELEMENT
| DHS PU | ||
| Specification | Specification | Specification |
| 88×99×6/8 | 95×105×7/8 | 204×218x7/9.5 |
| 90×100×6/8 | 100×110×7/8 | 210×223×7/9.5 |
| 90×102×6/8 | 105×117×7/9.5 | 210×224×7/9.5 |
| 92×102×6/8 | 120×133×7/9.5 | 212×226×7/9.5 |
| 95×105×6/8 | 120×136×7/7.9 | 220×233×7/9.5 |
| 98×108×6/8 | 124×136×7/9.5 | 220×234×7/9.5 |
| 98×110×6/8 | 125×138×7/9.5 | 230×243×7/9.5 |
| 100×110×6/8 | 130×143×7/9.5 | 230×244×7/9.5 |
| 105×115×6/8 | 136×149×7/9.5 | 240×253×7/9.5 |
| 105×120×6/8 | 137×150×7/9.5 | 250×263×7/9.5 |
| 110×120×6/8 | 140×153×7/9.5 | 250×264×7/9.5 |
| 110×121×6/8 | 143×153×7/9.5 | 280×293×7/9.5 |
| 110×122×6/8 | 145×158×7/9.5 | 300×313×7/9.5 |
| 110×125×6/8 | 150×162×7/9.5 | 330×343×7/9.5 |
| 112×122×6/8 | 150×163×7/9.5 | 25×34.7×7/10 |
| 112×127×6/8 | 150×164×7/9.5 | 88×98×7/10 |
| 115×125×6/8 | 155×168×7/9.5 | 110×122.2×7/11 |
| 118×128×6/8 | 160×173×7/9.5 | 90×102.2×7.2/12 |
| 120×130×6/8 | 160×174×7/9.5 | 35×43×8/12 |
| 137×150×6/8 | 165×179×7/9.5 | 100×115×8/13 |
| 98×113×6/9 | 170×183×7/9.5 | 125×140×8.5/11 |
| 124×139×6/9 | 170×184×7/9.5 | 250×266×9/12 |
| 149×164×6/9 | 172×182×7/9.5 | 260×275×9/12 |
| 177×192×6/9 | 180×192×7/9.5 | 280×296×9/12 |
| 25×34.7×6/10 | 180×194×7/9.5 | 290×306×9/12 |
| 40×49×6/10 | 185×199×7/9.5 | 360×375×9.5/13 |
| 110×120×6/10 | 187×201×7/9.5 | 220×234×10/13 |
| 137×149×6/11 | 190×203×7/9.5 | 230×246×10/13 |
| 70×80×6/12 | 190×204×7/9.5 | 335×351×10/13 |
| 165×177×6/12 | 200×213×7/9.5 | 455×480×18/28 |
| 75×85×7/8 | 200×214×7/9.5 | |
WP6TYPEPISTONRODDUST-PROOFSEALINGRING
ProductUsage:TheWP6 type ismainly used asa dust-proof sealing component for large-diameter piston rods.
Installation:To prevent the sealing lip from beingdamaged,measures should be taken to avoid sharp edges during installation.
12.5S ?
R:0.6S SPBF
R0.8S
3R≤0.3R1≤0.5
Medium:General petroleum-based hydraulic oil,waterglycolhydraulic oil,oil,water emulsifiedhydraulic oil,water,air
| Specification | Specification | Specification |
| 20×28.6×5.3/7 | 85×97.2×7.2×12 | 240×260×10.2×18 |
| 22×30.6×5.3/7 | 90×102.2×7.2/12 | 250×270×10.2/18 |
| 25×33.6×5.3/7 | 95×107.2×7.2/12 | 260×280×10.2/18 |
| 28×36.6×5.3/7 | 100×112.2×7.2/12 | 270×290×10.2/18 |
| 30×38.6×5.3/7 | 105×117.2×7.2/12 | 280×300×10.2/18 |
| 32×40.6×5.3/7 | 110×122.2×7.2/12 | 290×310×10.2/18 |
| 35×43.6×5.3/7 | 115×127.2×7.2/12 | 300×320×10.2/18 |
| 36×44.6×5.3/7 | 120×132.2×7.2/12 | 320×340×10.2/18 |
| 38×46.6×5.3/7 | 125×140×10.2/16 | 330×350×10.2/18 |
| 42×50.6×5.3/7 | 130×145×10.2/16 | 340×360×10.2/18 |
| 40×48.6×5.3/7 | 135×150×10.2/16 | 350×370×10.2/18 |
| 45×53.6×5.3/7 | 140×155×10.2/16 | 360×380×10.2/18 |
| 45×55.6×5.3/7 | 145×160×10.2/16 | 370×390×10.2/18 |
| 50×58.6×5.3/7 | 150×162.2×7.7/12 | 380×400×10.2/18 |
| 50×60.6×5.3/7 | 150×165×10.2/16 | 400×420×10.2/18 |
| 55×65.6×5.3/7 | 160×175×10.2/16 | 410×430×10.2/18 |
| 56×66.6×5.3/7 | 170×185×10.2/16 | 420×440×10.2/18 |
| 60×70.6×5.3/7 | 180×200×10.2/18 | 440×460×10.2/18 |
| 63×73.6×5.3/7 | 190×210×10.2/18 | 450×470×10.2/18 |
| 65×75.6×5.3/7 | 200×220×10.2/18 | 460×480×10.2/18 |
| 70×80.6×5.3/7 | 210×230×10.2/18 | 480×500×10.2/18 |
| 75×87.2×7.2/12 | 220×240×10.2/18 | 500×520×10.2/18 |
| 80×92.2×7.2/12 | 230×250×10.2/18 |
WA1RUBBERDUST-PROOFSEALINGRING
Features:The dust seal WA1 has the characteristics of simple structure,small cross-section,easyinstallation,and low cost.It isused to prevent contaminants from entering the hydraulic system and sealing systemof the oil cylinder.
Performance:1.Excellent scrubbing and dust removal effect 2.External circular positioning is reliable 3.The dust seal can be used within a wide temperature range 4.No back pressure will be generated between the sealing ringand the dust seal
Workingmedium:Hydraulic oil,water,emulsion
外径 00
内径台阶
产品标示：内径“外径台阶/总高
| Specification | Specification | Specification | Specification |
| 10×18×2.5/5 | 35×44.5×5/8 | 85×95×8/6 | 180×200×7/13 |
| 12×24×5/9 | 35×47×5/9 | 85×99×6/11 | 185×205×7/13 |
| 12×22×4/8 | 35×45×6/10 | 90×104×6/11 | 190×210×7/13 |
| 14×26×5/9 | 36×48×5/9 | 95×109×6/11 | 195×215×7/13 |
| 16×24×2.5/5 | 36×44×5/8 | 100×114×6/11 | 200×220×7/13 |
| 16×26×4/8 | 36×44x4.5//5.8 | 105×121×7/13 | 200×218.5×9/14 |
| 16×28×5/9 | 40×52×5/9 | 110×126×7/13 | 210×230×7/13 |
| 18×30×5/9 | 45×57×5/9 | 115×131×7/13 | 215×235×7/13 |
| 20×32×5/9 | 50×59×6/11 | 120×136×7/13 | 220×240×7/13 |
| 20×32×5/10 | 50×62×5/9 | 125×141×7/13 | 230×250×7/13 |
| 22×34×5/9 | 55×69×6/11 | 130×146×7/13 | 240×260×7/13 |
| 22×30×5/8 | 56×70×6/11 | 135×151×7/13 | 250×270×7/13 |
| 25×33×5/8 | 60×74×6/11 | 140×160×7/13 | 260×280×7/13 |
| 25×35×11/7 | 63×77×6/11 | 145×161×7/13 | 270×290×7/13 |
| 25×37×5/9 | 65×79×6/11 | 150×170×7/13 | 280×300×7/13 |
| 28×35×5.5/3.5 | 66×80×6/11 | 155×175×7/13 | 290×310×7/13 |
| 28×36×6/3.5 | 70×84×6/11 | 160×180×7/13 | 300×320×7/13 |
| 28×40×5/9 | 75×85×8/6 | 165×185×7/13 | |
| 30×42×5/9 | 75×89×6/11 | 170×190×7/13 | |
| 32×44×5/9 | 80×94×6/11 | 175×195×7/13 |
A1TYPEDOUBLESTEPDUSTRING
The function of the A1 double-step dust ring is to prevent dust,dirt,sand particles and metal chips from entering,through special design,to prevent scratches,protect the guide elements, and extend the service life of the seal.The interference diameter ensures that the seal fits tightly into the groove,preventing the ingress of impurities and moisture.
A1double-step dust ringprovidesa closed cavity for the cylinder block,no screws and brackets,no strict tolerances, and no metal inserts,which prevents corrosion that may occur like metal skeleton dust rings,and the grooves do not require strict tolerances.
Main features: good dust scraping effect, good wear resistance long service life,wide application,easy installation,small compressiondeformation
Product use:Al type dust ring is used on the axial movement rod,plunger and shaft sleeve of hydraulic cylindersand cylinders.
Surface speed: >= 1 { \mathbf { m } } / { \mathbf { s } }
| Specification | Specification | Specification | Specification |
| 12×20×4/7 | 42×50×4/7 | 78×86×4/7 | 145×157×5.5/10 |
| 14×22×4/7 | 45×53×4/7 | 80×88×4/7 | 150×162×5.5/10 |
| 15×23×4/7 | 46×54×4/7 | 80×92×5.5/10 | 160×172×5.5/10 |
| 16×24×4/7 | 48×56×4/7 | 85×93×4/7 | 166×178×5.5/10 |
| 18×26×4/7 | 49×56×4/7 | 90×98×4/7 | 170×182×5.5/10 |
| 20×28×4/7 | 50×58×4/7 | 90×102×5.5/10 | 180×192×5.5/10 |
| 22×30×4/7 | 50×62×5.5/10 | 95×103×4/7 | 190×202×5.5/10 |
| 25×33×4/7 | 55×63×4/7 | 97×105×4/7 | 200×212×5.5/10 |
| 26×34×4/7 | 56×64×4/7 | 100×108×4/7 | 220×235×6.5/13 |
| 28×36×4/7 | 60×68×4/7 | 105×117×5.5/10 | 230×245×6.5/13 |
| 30×38×4/7 | 62×70×4/7 | 110×122×5.5/10 | 240×255×6.5/13 |
| 32×40×4/7 | 63×71×4/7 | 120×132×5.5/10 | 260×275×6.5/13 |
| 35×43×4/7 | 65×73×4/7 | 125×137×5.5/10 | 275×290×6.5/13 |
| 36×44×4/7 | 70×78×4/7 | 128×140×5.5/10 | 290×305×6.5/13 |
| 38×46×4/7 | 70×82×5.5/10 | 130×142×5.5/10 | 370×385×6.5/13 |
| 40×48×4/7 | 75×83×4/7 | 140×152×5.5/10 |
JBULTRA-THINDUSTRING
Product application:This standard is applicable to the sealing components that prevent dust from entering the piston rodofhydrauliccylinders.
Working pressure: 3 2 { M P a }
Workingmedium:Hydraulic oil, water
Product hardness: { 8 5 \mathbf { A } } ± { 5 } Standard source:JBZQ4267-86 Original QZB336-77
| Specification | Specification | Specification |
| 18×26×2.5/5 | 80×92×4/8 | 175×190×5/10 |
| 20×28×2.5/5 | 85×97×4/8 | 180×195×5/10 |
| 22×30×2.5/5 | 90×102×4/8 | 200×218×6/12 |
| 25×33×2.5/5 | 95×107×4/8 | 210×228×6/12 |
| 28×36×2.5/5 | 100×112×4/8 | 220×238×6/12 |
| 30×38×2.5/5 | 105×117×4/8 | 230×248×6/12 |
| 63×71×2.5/5 | 110×122×4/8 | 240×258×6/12 |
| 32×41×3/6 | 115×127×4/8 | 250×268×6/12 |
| 35×44×3/6 | 120×132×4/8 | 260×278×6/12 |
| 36×45×3/6 | 125×140×5/10 | 270×288×6/12 |
| 40×49×3/6 | 130×145×5/10 | 280×298×6/12 |
| 45×54×3/6 | 135×150×5/10 | 290×308×6/12 |
| 50×59×3/6 | 140×155×5/10 | 300×318×6/12 |
| 55×64×3/6 | 145×160×5/10 | 320×338×6/12 |
| 60×69×3/6 | 150×165×5/10 | 360×378×6/12 |
| 63×72×3/6 | 155×170×5/10 | 370×388×6/12 |
| 65×74×3/6 | 160×175×5/10 | 380×398×6/12 |
| 70×82×4/8 | 165×180×5/10 | |
| 75×87×4/8 | 170×185×5/10 | |
DKBI TYPEDUSTPROOF SKELETON OIL SEAL SEAL
Product Usage:Removes dust,sand,rainwater and other contaminants adhering to the outer surface of the reciprocating motion piston rod that leaks out of the cylinder,preventing external impurities from entering the sealing mechanism.
Working Medium:Hydraulic oil, fuel, lubricating oil, inorganic acids,etc.
Product Features:1.Excellent corrosion resistance
2.Stabilityand superiority for different fuels and lubricants 3.Good wear resistance 4.Anti-aging,long service life Application Scope:High-frequency,high-speed,harsh externalworkingconditions
WorkingSpeed: <= 1 { \mathbf { m } } / { \mathbf { s } }
ProductHardness:92A
| Specification | Specification | Specification |
| 18×30×6/9 | 55×69×8/11 | 110×126×9/12 |
| 19×31×6/9 | 60×70×7/10 | 115×131×9/12 |
| 20×32×6/9 | 63×75×8/11 | 120×136×9/12 |
| 25×37×6/9 | 63×77×8/11 | 125×141×9/12 |
| 28×40×6/9 | 65×79×8/11 | 130×146×9/12 |
| 30×42×6/9 | 70×80×7/10 | 135×155×10/14 |
| 32×44×7/10 | 70×80×8/11 | 140×160×10/14 |
| 32×52×7/10 | 70×84×8/11 | 145×165×10/14 |
| 34×46×7/10 | 75×85×6/10 | 150×170×10/14 |
| 35×45×7/10 | 75×89×8/11 | 160×180×10/14 |
| 35×47×7/10 | 80×90×8/11 | 170×190×10/14 |
| 38×50×7/10 | 80×94×8/11 | 175×195×10/14 |
| 40×50×7/10 | 85×99×8/11 | 180×200×10/14 |
| 40×52×7/10 | 90×104×8/11 | 180×205×12/17 |
| 45×55×7/10 | 95×109×8/11 | 200×216×8/11 |
| 45×57×7/10 | 100×114×8/11 | 210×235×12/17 |
| 50×60x7/10 | 105×115×7/10 | 265×285×12/17 |
| 50×62×7/10 | 105×121×9/12 |
DKBOUTER IRONSHELL SKELETON OIL SEALDUSTRING
ProductFunction:Themain functionof the DKB iron shell dust shield is to remove dust,dirt,sand particles or fine debris fromthe surface of the piston rod,effectively preventing external dust and impurities from entering the sealed mechanical interior.This dust shield hasa simple structure and is convenient for groove processing,which can save installation space.
The sealing lip structure on the inner side can retain the normal working residual oil filmon the piston rod,playinganauxiliary sealing role and ensuring the sealing performance of the system.
Application Scope:The outlet end cover of the piston rod orplungerrodofthehydraulic cylinder,applicable to various hydraulic systems,especiallyperformingwell indust prevention of construction machinery hydraulic cylinders.
RepetitiveSpeed: <= 1 { \mathbf { m } } / { \mathbf { s } } ProductHardness:92A
| Specification | Specification | Specification | Specification |
| 10×20×5/8.3 | 35×47×7/10 | 70×84×8/11 | 135×155×9/12 |
| 14×24×5/7 | 36×48×7/10 | 70×80×8/11 | 140×160×10/14 |
| 16×26×5/7 | 38×50×7/10 | 75×89×8/11 | 145×165×10/14 |
| 18×30×6/9 | 40×52×7/10 | 80×90×8/11 | 150×170×10/14 |
| 19×31×6/9 | 40×50×7/10 | 80×94×8/11 | 155×175×10/14 |
| 20×32×6/9 | 40×62×8/11 | 85×99×8/11 | 160×180×10/14 |
| 22×34×6/9 | 45×57×7/10 | 90×104×8/11 | 170×190×10/14 |
| 25×37×6/9 | 50×60×7/10 | 95×109×8/11 | 180×200×10/14 |
| 28×40×6/9 | 50×62×7/10 | 100×114×8/11 | 180×205×12/17 |
| 30×42×6/9 | 50×72×8/11 | 105×121×9/12 | 190×215×12/17 |
| 30×45×6/9 | 55×69×7/10 | 110×126×9/12 | 200×225×12/17 |
| 30×47×7/10 | 56×70×8/11 | 115×131×9/12 | 210×235×12/17 |
| 31.5×44×7/10 | 60×70×7/10 | 112×128×9/12 | 225×250×12/17 |
| 32×44×7/10 | 60×74×8/11 | 120×136×9/12 | 250×275×12/17 |
| 32×52×7/10 | 63×77×8/11 | 125×141×9/12 | 265×285×12/17 |
| 34×46×7/10 | 65×79×8/11 | 130×146×9/12 |
K30/PDR INNER SKELETONDUSTPROOFRING
K30/PDR isa single-acting internal skeleton dust seal assembly,composedofametal reinforcedbyvulcanized elastic nitrile rubber usinga special production method.
The K30 dust seal component is installed in the housing with an elastic retaining ring.The sealing part is pushed in and fixed by the elastic retainingring.The assembly tool must be soft and have no sharp edges.Before installation, it is necessary to apply oil with system oil.
Workingmedium:General petroleum-based hydraulic oil,water ethylene glycol hydraulic oil,oil-water emulsified hydraulicoil.
00 倒角無毛刺 倒角無毛刺 8 0 00
Productadvantages:1.Excellent dust-proof effect 2.Excellent sealing effect 3.Capable ofworkingunder harsh conditions 4.Has good adaptability to temperature changes under the action of metal rings.
Repetitive speed: <= 1 . 0 \ { m / s }
| K30 skeleton dustproof | Purely imported K30 | FKM K30 |
| Specification | Specification | Specification |
| 12×22×7/9.5 | 12×20×6/8.5 | 12×22×7/9.5 |
| 16×26×7/9.5 | 12×22×7/9.5 | 16×26×7/9.5 |
| 20×30×7/9.5 | 14×24×7/9.5 | 20×30×7/9.5 |
| 25×35×7/9.5 | 16×26×7/9.5 | 25×35×7/9.5 |
| 32×42×7/9.5 | 18×26×6/8.5 | 32×42x7/9.5 |
| 40×50×7/9.5 | 20×30×7/9.5 | 40×50×7/9.5 |
| 45×55x7/9.5 | 22×32×7/9.5 | 50×60×7/9.5 |
| 50×60×7/9.5 | 25×35×7/9.5 | |
| 63×75×9/18 | 30×40×7/9.5 | |
| 32×42×7/9.5 | ||
| 35×45×7/9.5 | ||
| 40×50×7/9.5 | ||
| 45×55×7/9.5 | ||
| 50×60×7/9.5 | ||
COMPOSITEMATERIALGUIDEBELT
Composite material guide belt
Product application:Reciprocating hydrauliccylinders,thepistonand the piston rod serve as support and guidance.
Workingmedium:Hydraulic oil, compressed air
Standard source:GB/T15242.2-94
The length of the guide belt for the piston is { \bf L } = π ( { \bf D } + { \bf B } ) - Z The length of the guide belt for the piston rod is { \bf L } = π ( { \bf D } + { \bf B } ) - Z
| Phenolic cloth guide belt, 10 meters per roll | ||||
| Domestic red Imported blue | Domestic red Imported blue | Domestic red Imported blue | ||
| 5.6×2.5 | 15×2.5 | 30×4 | ||
| 6.3×2.5 | 15×3 | |||
| 8×2 | 15×3.5 | |||
| 8×2.5 | 15×4 | |||
| 9.7×2 | 40×2.5 20×2 | |||
| 9.7×2.5 | 40×3 20×2.5 40×4 | |||
| 9.7×3 | 50×2.5 | |||
| 9.7×4 | 20×3 50×3 | |||
| 20×3.5 | ||||
| 10×2 | 20×4 50×3.5 | |||
| 10×2.5 | 25×2 50×4 12.7×3.175 | |||
| 10×3 | 25×2.5 | |||
| 10×4 | 25×3 19×05×3.175 | |||
| 12×2.5 | 25×3.5 25.4x3.175 25×4 30×5 | |||
| 12×3 | 30×2 | |||
| 13×2.5 | 30×2.5 50.8×3.175 | |||
| 13×3 | 30x3 | |||
| 14×3 | ||||
| 15×2 | 30×3.5 | |||
COMPOSITEMATERIALGUIDEBELT
| PTFE+Bronze Guiding belt | |||||||
| Specification | per meter Weight (grams) | each roll Weight of (kilograms) | each roll Length of (meters) | Specification | per meter Weight (grams) | each roll Weight of (kilograms) | each roll Length of (meters) |
| 4×1.5 | 19.2 | 0.88 | 46 | 12×4 | 153.6 | 2.46 | 16 |
| 4×2 | 25.6 | 0.87 | 34 | 15×1.5 | 72.0 | 3.30 | 46 |
| 4×2.5 | 32.0 | 0.86 | 27 | 15×2 | 96.0 | 3.26 | 34 |
| 4×3 | 38.4 | 0.88 | 23 | 15×2.5 | 120.0 | 3.24 | 27 |
| 5×1.5 | 24.0 | 1.10 | 46 | 15×3 | 144.0 | 3.31 | 23 |
| 5×2 | 32.0 | 1.09 | 34 | 15×4 | 192.0 | 3.07 | 16 |
| 5×2.5 | 40.0 | 1.08 | 27 | 20×1.5 | 96.0 | 4.42 | 46 |
| 5×3 | 48.0 | 1.10 | 23 | 20×2 | 128.0 | 4.35 | 34 |
| 6x1.5 | 28.8 | 1.32 | 46 | 20×2.5 | 160.0 | 4.32 | 27 |
| 6×2 | 38.4 | 1.31 | 34 | 20×3 | 192.0 | 4.40 | 23 |
| 6×2.5 | 48.0 | 1.30 | 27 | 20×4 | 256.0 | 4.10 | 16 |
| 6×3 | 57.6 | 1.32 | 23 | 25×1.5 | 120.0 | 5.52 | 46 |
| 8×1.5 | 38.4 | 1.77 | 46 | 25×2 | 160.0 | 5.44 | 34 |
| 8×2 | 51.2 | 1.74 | 34 | 25×2.5 | 200.0 | 5.40 | 27 |
| 8×2.5 | 64.0 | 1.73 | 27 | 25×3 | 240.0 | 5.52 | 23 |
| 8×3 | 76.8 | 1.77 | 23 | 25×4 | 320.0 | 5.12 | 16 |
| 8×4 | 102.4 | 1.64 | 16 | 30×2 | 192.0 | 6.528 | 34 |
| 10×1.5 | 48.0 | 2.20 | 46 | 30×2.5 | 240.0 | 6.48 | 27 |
| 10×2 | 64.0 | 2.18 | 34 | 30x3 | 288.0 | 6.624 | 23 |
| 10×2.5 | 80.0 | 2.16 | 27 | 30×4 | 384.0 | 6.144 | 16 |
| 10×3 | 96.0 | 2.20 | 23 | 35×2.5 | 280.0 | 7.56 | 27 |
| 10×4 | 128.0 | 2.05 | 16 | 35×3 | 336.0 | 7.728 | 23 |
| 12×1.5 | 57.6 | 2.65 | 46 | 35×4 | 448.0 | 7.168 | 16 |
| 12×2 | 76.8 | 2.61 | 34 | 40×2.5 | 320.0 | 8.64 | 27 |
| 12×2.5 | 96.0 | 2.59 | 27 | 40×3 | 384.0 | 8.832 | 23 |
| 12×3 | 115.2 | 2.65 | 23 | 40×4 | 512.0 | 8.192 | 16 |
GUIDE RING
Product application:This standard is applicable to variouscylindersand those servingas guides within the cylinders.
Workingmedium:Hydraulic oil, emulsion,compressed air,water
Producthardness: 9 5 \mathbf { A } ± 5
000
| Specification | Specification | Specification | Specification | Specification |
| 20×25×10 | 95×100×10 | 45×50×15 | 63×68×20 | 190×195×20 |
| 22×27×10 | 100×105×10 | 50×55×15 | 65×70×20 | 195×200×20 |
| 25×30×10 | 105×110×10 | 55×60×15 | 70×75×20 | 200×205×20 |
| 27×32×10 | 110×115×10 | 60×65×15 | 75×80×20 | 100×105×25 |
| 28×33×10 | 115×120×10 | 58×63×15 | 80×85×20 | 105×110×25 |
| 30×35×10 | 120×125×10 | 63×68×15 | 85×90×20 | 110×115×25 |
| 32×37×10 | 125×130×10 | 65×70×15 | 90×95×20 | 115×120×25 |
| 35×40×10 | 130×135×10 | 70×75×15 | 95×100×20 | 120×125×25 |
| 36×45×10 | 135×140×10 | 75×80×15 | 100×105×20 | 125×130×25 |
| 38×43×10 | 140×145×10 | 85×90×15 | 105×110×20 | 130×135×25 |
| 40×45×10 | 145×150×10 | 90×95×15 | 110×115×20 | 135×140×25 |
| 41×45×10 | 150×155×10 | 100×110×15 | 115×120×20 | 140×145×25 |
| 41×46×10 | 45×50×12 | 105×110×15 | 120×125×20 | 145×150×25 |
| 42×47×10 | 50×55×12 | 110×115×15 | 125×130×20 | 150×155×25 |
| 45×50×10 | 58×63×12 | 115×120×15 | 130×135×20 | 155×160×25 |
| 50×55×10 | 65×70×12 | 120×125×15 | 135×140×20 | 160×165×25 |
| 55×60×10 | 70×75×12 | 125×130×15 | 140×145×20 | 165×170×25 |
| 58×63×10 | 75×80×12 | 130×135×15 | 145×150×20 | 170×175×25 |
| 60×65×10 | 80×85×12 | 135×140×15 | 150×155×20 | 175×180×25 |
| 63×68×10 | 85×90×12 | 140×145×15 | 155×160×20 | 180×185×25 |
| 65×70×10 | 90×95×12 | 145×150×15 | 160×165×20 | 185×190×25 |
| 70×75×10 | 95×100×12 | 150×155×15 | 165×170×20 | 190×195×25 |
| 75×80×10 | 100×105×12 | 50×55×20 | 170×175×20 | 195×200×25 |
| 80×85×10 | 30×35×15 | 55×60×20 | 175×180×20 | 250×255×25 |
| 85×90×10 | 35×40×15 | 58×63×20 | 180×185×20 | |
| 90×95×10 | 40×45×15 | 60×65×20 | 185×190×20 |
MXTYPEGUIDERINGFORAXES
Product application: This standardisapplicable to various cylinders (bothhydraulicand pneumatic) for guiding purposes.
Working medium:Hydraulic oil,compressed air,water
Producthardness: 9 5 \mathbf { A } ± 5
| Specification | Specification | Specification |
| 22×28×19 | 56×62×19 | 125×135×24 |
| 25×31×19 | 63×73×24 | 140×150×24 |
| 28×34×19 | 70×80×24 | 160×170×24 |
| 36×42×19 | 80×90×24 | 180×190×24 |
| 40×46×19 | 90×100×24 | 200×210×24 |
| 45×51×19 | 100×110×24 | |
| 50×56×19 | 110×120×24 | |
PTFEGASKETAXIALUSERETAININGRING
Productapplication:This standard is applicable for use with sealing rings for shafts when the working pressure of the cylinder is greater than 1 0 { M P a } ,or when the cylinder is subjected to eccentric force,servingasa protective function for the sealing rings.
Workingmedium:Hydraulic oil,emulsion,water
Working hardness: 9 2 \mathbf { A } ± 5
Standard source:Enterprise standard
CD
| Specification | Specification | Specification | Specification |
| 14×10.8 ×0.8 | 22×18×1.25 | 38×33×1.5 | 63×58×1.5 |
| 18×14×0.8 | 23×19×1.25 | 40×35×1.5 | 65×60×1.5 |
| 21×17x0.8 | 24×20×1.25 | 40×34×1.5 | 68×63x1.5 |
| 24×20×0.8 | 25×21×1.25 | 41×35×1.5 | 70×65×1.5 |
| 31×27x0.8 | 25×20×1.25 | 42×37×1.5 | 75×70×1.5 |
| 38×34x0.8 | 26×22×1.25 | 45×40×1.5 | 79×74×1.5 |
| 8 ×5x1.25 | 28×24×1.25 | 45×39×1.5 | 80×75×1.5 |
| 9 ×6×1.25 | 28×23×1.25 | 46×40×1.5 | 85×80×1.5 |
| 10x7 ×1.25 | 30×25×1.25 | 46×41×1.5 | 90×85×1.5 |
| 11×8 ×1.25 | 28×23x1.5 | 47×41×1.5 | 95×90×1.5 |
| 12×9 ×1.25 | 28×22×1.5 | 47×42×1.5 | 100×95×1.5 |
| 13×10×1.25 | 30×25×1.5 | 48×42×1.5 | 105×100×1.5 |
| 14×10×1.25 | 31×25x1.5 | 50×45×1.5 | 110×105×1.5 |
| 15×11×1.25 | 32×27×1.5 | 50×44×1.5 | 115×110×1.5 |
| 16×12×1.25 | 33×28×1.5 | 52×47×1.5 | 120×115×1.5 |
| 17×13×1.25 | 34×28×1.5 | 55×49×1.5 | 125×120×1.5 |
| 18×14×1.25 | 35×30×1.5 | 55×50×1.5 | 130×125×1.5 |
| 19×15×1.25 | 36×30×1.5 | 56×50×1.5 | 135×130×1.5 |
| 20×16×1.25 | 38×32x1.5 | 56×51×1.5 | 140×135×1.5 |
| 21×17×1.25 | 37×32×1.5 | 60×55×1.5 | 145×140×1.5 |
PTFEGASKETAXIALUSERETAININGRING
| Specification | Specification | Specification | Specification |
| 10×5×2 | 30×20×2 | 85×75×2 | 100×88×2 |
| 11×6 ×2 | 30×22×2 | 90×80×2 | 110×98×2 |
| 12×6×2 | 32×22×2 | 95×85×2 | 120×108×2 |
| 14×6×2 | 33×24×2 | 100×90×2 | 125×113×2 |
| 15×8×2 | 33×25×2 | 105×95×2 | 130×118×2 |
| 16×10×2 | 35×25×2 | 110×100×2 | 140×128×2 |
| 17×10×2 | 38×28×2 | 115×105×2 | 150×138×2 |
| 17×9×2 | 38×30×2 | 120×110×2 | 160×148×2 |
| 18×6×2 | 39×30×2 | 125×115×2 | 170×158×2 |
| 18×8×2 | 40×30×2 | 130×120×2 | 180×168×2 |
| 18×10×2 | 40×32×2 | 135×125×2 | 180×164×2 |
| 18×12×2 | 42×32×2 | 140×130×2 | 190×178×2 |
| 19×11×2 | 45×35×2 | 145×135×2 | 200×188×2 |
| 19×12×2 | 48×38×2 | 150×140×2 | 200×184×2 |
| 19×10×2 | 48×40×2 | 160×150×2 | 82×70×2 |
| 20×10×2 | 50×40×2 | 170×160×2 | 92×80×2 |
| 20×12×2 | 50×42×2 | 180×170×2 | 102×90×2 |
| 20×14×2 | 55×45×2 | 190×180×2 | 112×100×2 |
| 22×12×2 | 57×47×2 | 195×185×2 | 117×105×2 |
| 22×14×2 | 58×48×2 | 200×190×2 | 122×110×2 |
| 24×12×2 | 58×50×2 | 210×200×2 | 132×120×2 |
| 24×16×2 | 58×48×2 | 220×210×2 | 142×130×2 |
| 24×18×2 | 60×50×2 | 225×215×2 | 152×140×2 |
| 25×16×2 | 63×53×2 | 230×220×2 | 162×150×2 |
| 25×18×2 | 63×51×2 | 240×230×2 | 172×160×2 |
| 26×16×2 | 63×55×2 | 250×240×2 | 182×170×2 |
| 26×18×2 | 65×55×2 | 260×250×2 | 192×180×2 |
| 28×16×2 | 70×60×2 | 77×65×2 | |
| 28×18×2 | 75×65×2 | 80×68×2 | |
| 28×20×2 | 80×70×2 | 90×78×2 |
QY-D SEALINGRINGFOR CYLINDER HOLE
1.Product use:This standard is applicable to seals in reciprocating motion in variouscylinderpistons.
2.Workingmedium:compressed air
3.Producthardness: 7 5 \mathbf { A } ± 5
品
| Specification | Specification | |||
| QYD20×4 | 20×12×8 | QYD125×6 | 125×113×12 | |
| QYD22×4 | 22×14×8 | QYD130×5 | 130×120×12 | |
| QYD25×4 | 25×17×8 | QYD130×6 | 130×118×12 | |
| QYD30×4 | 30×22×8 | QYD140×5 | 140×130×12 | |
| QYD32×4 | 32×24x8 | QYD140×6 | 140×128×12 | |
| QYD35×4 | 35×27x8 | QYD150×5 | 150×140×12 | |
| QYD40×4 | 40×32×8 | QYD150×6 | 150×138×12 | |
| QYD45×4 | 45×37×8 | QYD160×5 | 160×150×12 | |
| QYD50×4 | 50×42×8 | QYD160×6 | 160×148×12 | |
| QYD55×4 | 55×47×8 | QYD170×7.5 | 170×155×16 | |
| QYD56×4 | 56×48×8 | QYD170×8 | 170×154×16 | |
| QYD60×5 | 60×50×12 | QYD180×7.5 | 180×165×16 | |
| QYD60×6 | 60×48×12 | QYD180×8 | 180×164×16 | |
| QYD63×5 | 63×53×12 | QYD190×7.5 | 190×175×16 | |
| QYD63×6 | 63×51×12 | QYD190×8 | 190×174×16 | |
| QYD 65×5 | 65×55×12 | QYD200×7.5 | 200×185×16 | |
| QYD70×5 | 70×60×12 | QYD200×8 | 200×184×16 | |
| QYD70×6 | 70×58×12 | QYD220×7.5 | 220×205×16 | |
| QYD80×5 | 80×70×12 | QYD220×8 | 220×204×16 | |
| QYD80×6 | 80×68×12 | QYD250×7.5 | 250×235×16 | |
| QYD90×5 | 90×80×12 | QYD250×8 | 250×234×16 | |
| QYD90×6 | 90×78×12 | QYD300×7.5 | 300×285×16 | |
| QYD100×5 | 100×90×12 | QYD300×8 | 300×284×16 | |
| QYD100×6 | 100×88×12 | QYD320×7.5 | 320×305×16 | |
| QYD110×5 | 110×100×12 | QYD320×8 | 320×304×16 | |
| QYD110×6 | 110×98×12 | QYD340×10 | 340×320×20 | |
| QYD120×5 | 120×110×12 | QYD360×10 | 360×340×20 | |
| QYD120×6 | 120×108×12 | QYD400×10 | 400×380×20 | |
| QYD125×5 | 125×115×12 | |||
QY-dCYLINDERAXLEUSED SEALRING
1.Product use:This standard is applicable to seals with reciprocating motionin variouscylinderpiston rods.
2.Working medium:compressed air
3.Product hardness: 7 5 \mathbf { A } ± 5
00
| Specification | Specification | ||
| QYd12 | 12×20×8 | QYd100×5 | 100×110×12 |
| QYd14 | 14×22×8 | QYd100×6 | 100×112×12 |
| QYd16 | 16×24×8 | QYd110×5 | 110×120×12 |
| QYd18 | 18×26×8 | QYd110×6 | 110×122×12 |
| QYd20 | 20×28×8 | QYd120×5 | 120×130×12 |
| QYd22 | 22×30×8 | QYd120×6 | 120×132×12 |
| QYd25 | 25×33×8 | QYd125×5 | 125×135×12 |
| QYd28 | 28×36×8 | QYd125×6 | 125×137×12 |
| QYd30 | 30x38×8 | QYd140×5 | 140×150×12 |
| QYd32 | 32×40×8 | QYd140×6 | 140×152×12 |
| QYd35 | 35×43×8 | QYd150×5 | 150×160×12 |
| QYd36 | 36×44×8 | QYd150×6 | 150×162×12 |
| QYd40 | 40×48×8 | QYd160×7.5 | 160×175×16 |
| QYd45 | 45×53×8 | QYd160×8 | 160×176×16 |
| QYd50×5 | 50×60×12 | QYd170×7.5 | 170×185×16 |
| QYd50×6 | 50×62×12 | QYd170×8 | 170×186×16 |
| QYd55×5 | 55×65×12 | QYd180x7.5 | 180×195×16 |
| QYd55×6 | 55×67×12 | QYd180×8 | 180×196×16 |
| QYd56×5 | 56×66×12 | QYd200x7.5 | 200×215×16 |
| QYd56×6 | 56×68×12 | QYd200×8 | 200×216×16 |
| QYd60×5 | 60×70×12 | QYd220×7.5 | 220×235×16 |
| QYd60×6 | 60×72×12 | QYd220×8 | 220×236×16 |
| QYd63×5 | 63×73×12 | QYd250×7.5 | 250×265×16 |
| QYd63×6 | 63×75×12 | QYd250×8 | 250×266×16 |
| QYd65×5 | 65×75×12 | QYd280×7.5 | 280×295×16 |
| QYd70×5 | 70×80×12 | QYd280×8 | 280×296×16 |
| QYd70×6 | 70×82×12 | QYd320×7.5 | 320×335×16 |
| QYd80×5 | 80×90×12 | QYd320×8 | 320×336×16 |
| QYd80×6 | 80×92×12 | QYd340×10 | 340×360×20 |
| QYd90×5 | 90×100×12 | QYd360×10 | 360×380×20 |
| QYd90×6 | 90×102×12 | ||
ZHMTYPEPNEUMATIC COMBINED SEALINGRING
Product Use:This standard isapplicable to the reciprocating motion of seals in various cylinderpistonrodsthatplaya sealing and dustproof role.
Working medium: compressed air
Product hardness: 7 5 \mathbf { A } ± 5
8
| Model number | Specification | Model number | Specification |
| ZHM8 | 8x14×7/9 | ZHM36 | |
| ZHM10 | 10×16×7/9 | ZHM40 | 40×48×8/11 |
| ZHM12 | 12×18×7/9 | ZHM45 | 45×57×11/15 |
| ZHM14 | 14×20×7/9 | ZHM50 | 50×62×11/15 |
| ZHM15 | 15×21×7/9 | ZHM55 | 55×67×11/15 |
| ZHM16 | 16×22×7/9 | ZHM60 | 60×72×11/15 |
| ZHM18 | 18×24×7/9 | ZHM63 | 63×75×11/15 |
| ZHM20 | 20×28×8/11 | ZHM65 | 65×77×11/15 |
| ZHM22 | 22×30×8/11 | ZHM70 | 70×82×11/15 |
| ZHM25 | 25×33×8/11 | ZHM75 | 75×87×11/15 |
| ZHM28 | 28×36×8/11 | ZHM80 | 80×92×11/15 |
| ZHM30 | 30×38×8/11 | ZHM85 | 85×97×11/15 |
| ZHM32 | 32×40×8/11 | ZHM90 | 90×102×11/15 |
| ZHM35 | 35×43×8/11 | ZHM100 | 100×112×11/15 |
CK TYPEPISTON RODDOUBLE-ACTING DUST SEALRING
1.Product use:This standard is suitable for seals thatplayasealing and dustproof role in cylinder piston rods.
2.Working medium:compressed air,water,oil 3.Product hardness: 7 5 \mathbf { A } ± 5
0
| Rubber | |||
| Specification | Specification | Specification | Specification |
| 16×28×5/9 | 32×44×5/9 | 70×84×6/11 | 110×126×7/13 |
| 18×30×5/9 | 35×47×5/9 | 75×89×6/11 | 120×136×7/13 |
| 20×32×5/9 | 40×52×5/9 | 80×94×6/11 | 125×141×7/13 |
| 22×34×5/9 | 45×57×5/9 | 85×99×6/11 | 140×160×7/13 |
| 25×37×5/9 | 50×62×5/9 | 90×104×6/11 | 160×180×7/13 |
| 28×40×5/9 | 55×69×6/11 | 100×114×6/11 | 180×200×7/13 |
| 30×42×5/9 | 63×77×6/11 | 105×121×7/13 | 200×220×7/13 |
| PU | |||
| Specification | Specification | Specification | Specification |
| 28×40×5/10 | 56×78.6×6/11 | 100×112×6/11 | 140×160×6/11 |
| 30×41.8×5/9 | 60×70×6/9 | 100×115×7/12 | 145×158×9/13 |
| 32×43.8×5/9 | 60×73.6×6/11 | 100×118×6/12 | 150×169.4×7/13 |
| 35×45×5/8 | 63×75×6/10 | 110×130×13/16 | 155×170×7/12 |
| 35×46.8×5/9 | 65×78.6×6/11 | 110×122×8/10 | 170×186×9/13 |
| 40×51.8×5/9 | 70×83.6×6/11 | 110×122×7/12 | 175×191×8/13 |
| 45×56×5/9 | 80×93×6/11 | 115×129×6/13 | 185×202×11/12 |
| 50×56×3.5/10 | 80×98×6/12 | 120×132×9/13 | 200×219.4×7/13 |
| 50×63×6/11 | 86×98×6/11 | 125×137×8/12 | |
| 50×61.8×5/9 | 90×102×5/10 | 125×143×6/12 | |
| 55×68×6/10 | 90×103.6×6/11 | 125×140×7/13 | |
EUTYPEPISTONROD SEALING/DUST-PROOFDUAL-PURPOSERING
EUtypePneumaticsealingcomponents
The piston rod in the cylinder is equipped with an EU-type pneumatic piston rod seal/dust cover. This combination has three functions:sealing, dustprevention,and fixation.
Characteristics
\spadesuit It will not corrode.Due to the hybrid positioning, the dust seal ring has abandoned the use of unnecessary additional ring-shaped clamps.
\spadesuit It will not create dust corners.Due to the special design of the adjacent area of the dust seal ring.
\spadesuit Lowfriction and long operating length-due to the use ofa balanced sealinglip geometric structure combined with anti-wear,high elasticity,and durable polyurethanematerials.
\spadesuit Afterinitial assemblylubrication,evenwhenused in dry and oil-free air,it hasa long service life.
Hardness:93A
| Specification | Specification | Specification | Specification |
| 12×19×10 | 18×26×10.7 | 25×35×11.7 | 45×55×12.2 |
| 12×20×10.7 | 18×28×10.7 | 30×40×11.2 | 50×60×12.2 |
| 12×22×10.7 | 20×30×10.7 | 32×42×11.2 | 63×75×13 |
| 14×24×10.7 | 22×32×11.2 | 36×44×11.2 | |
| 16×26×10.7 | 25×35×11.2 | 40×50×11.2 |
PP/ASTYPEPISTONSEAL SPECIAL SEALINGCOMPONENT
| Rubber PP、 AS Cylinder dust prevention | |||
| Specification | Specification | Specification | Specification |
| 16×22×5.5 | 28×37×6.2 | 35×45×6.2 | 55×69×6.2 |
| 20×28×5.5 | 30×40×6.2 | 40×50×6.2 | 70×87×9 |
| 25×33×6.2 | 32×42×6.2 | 45×55×6.2 | 80×97×9 |
| 28×36×6.2 | 35×44×6.2 | 50×60×6.2 | 90×107×9 |
| PUMaterial PP | |||
| Specification | Specification | Specification | Specification |
| 8×11.6×3.5 | 16×24×7.8 | 25×33×7.8 | 40×50×8.8 |
| 9.5×15×4.6 | 16×25×7.8 | 28×36×7.8 | 40×50×7.8 |
| 10×18×7.8 | 18×26x7.8 | 30×40×7.8 | 50×60×7.8 |
| 12×18×5 | 20×28×7.8 | 32×42x7.8 | 57×74×11 |
| 16×22×5.5 | 22×30×7.8 | 36×46×7.8 | 78×95×11 |
YCCCYLINDERPISTONSEALINGRING
Product Usage:YCC pneumatic piston-specific sealing ring.This type of seal can be easily installed in the piston groove and is suitable for both long-stroke and short-strokecylinders.Back-to-back installation isalso possible,with excellent sealing performance.
Product Features:Special structure with threadedouterlipdesign,which enablesittomaintain initiallubricationwell.Combinedwithdifferent materials,it has good wear resistance.
Working Medium:Air containing lubricating oil,dryair,and oil-free air.
Repetitive Speed: <= 1 ~ { m / s }
QF
Installation diagram of YCC cylinder sealing ring
| Specification | Specification | Specification |
| 32×24×5.5 | 80×70×6.5 | 180×165×9 |
| 40×30×6.5 | 90×80×6.5 | 200×185×9 |
| 50×40×6.5 | 100×90×7.3 | 250×230×12 |
| 63×53×6.5 | 125×110×9 | |
| 70×60×6.5 | 160×145×9 |
COP,DOUBLEO-RINGCYLINDERPISTON SEAL
COPand double O-ring cylinderpiston seals are small-sized pistonsealsforpneumaticcylinders.Compared with O-rings,they have better frictioncharacteristics andareusedinstandardcylinders,small-diameter cylinders,and thin-type cylinders.
Workingmedium:Oiled lubricated air,dry air, and oil-free air (initial lubrication is required during assembly).
Installation: This type of pneumatic seal can easily be fitted onto the piston and inserted into the groove. To avoid damaging the seal,measures should be taken to avoid sharp edges during installation.In the absence of oil lubrication,itis important to have a complete sliding film on the sealing surface.This should be done before assembly to ensure the seal has a long service life.
| Specification | Specification | Specification |
| 16×11.4×1.8 | 80×65×5.6 | 160×145×7.6 |
| 20×14×2.2 | 85×70×5.6 | 160×140×7.6 |
| 25×17x3 | 90×75×5.6 | 180×160×7.6 |
| 32×24×3 | 100×85×5.6 | 200×180×7.6 |
| 40×32x3 | 125×110×5.6 | 250×230×7.6 |
| 50×40×3.6 | 140×125×5.6 | 300×280×7.6 |
| 63×53x3.6 | 160×145×5.6 | |
Z8TYPECYLINDERHOLEUSE SEALINGRING
The Z8 type pneumatic sealing component is a type of lip-shaped seal used forcylinderpistonsand valves.The Z8 standard series corresponds to the cylinder diameters thatcomplywithISO3320andtheCETOPRP52P,RP43P, andRP53Pstandards.
Main advantages:The special structure of the Z8 lip-shaped seal has the followingadvantageswhen used in pneumatic equipment: the installation groove is small,and the sealing performance is good.
Due to the optimal geometric shape of the sealing lip that maintains the lubricating film,and also because the selected syntheticrubbermaterialisprovento beverysuitablefor pneumatic equipment, the operationis very stable.The structure issmall,so both static and dynamic friction are very low.
Applications:Dryairandairwithoutoil.The initial lubrication during assembly plays an important role in extending theworkinglife.The lip-shaped sealing structure ensures the necessary sealing function.Itis easy to install in the sealing groove.It is also suitable for cylinders with buffering effects.
Installation: This type of Z8 pneumatic piston seal can be easily fitted onto the piston and placed in the groove.To avoid damaging the seal,sharp edges on the pistonand cylinder should be removed.In the absence of lubrication,it is importanttoobtainacompletelubricatingfilminside the cylinderduringassembly,which should be done before installation to ensure the workinglife of the seal.
Workingmedium:Oiledlubricatedair,aswell asdryair andairwithoutoil (afterinitiallubricationwithoil)
Repetitive speed: <= 1 ~ { m / s }
| Specif ication | Specification | Specification |
| 8x4×2.55 | 25×19×3.25 | 90×80×4.25 |
| 10×6×2.55 | 30×22×3.25 | 100×90×4.25 |
| 12×7×2.55 | 32×24x3.25 | 125×105×8.25 |
| 14×8×2.55 | 40×32×3.25 | 150×130×8.25 |
| 15×9×2.55 | 50×42x3.25 | 160×140×8.25 |
| 16×10×2.55 | 63×53×4.25 | 200×180×8.25 |
| 20×14×2.55 | 80×70×4.25 | 250×230×10 |
CPPNEUMATICBUFFER EXTERNALFRAME SEALINGRING
The CP type buffer seal isa frame-type buffer sealing component specially designed forcylinders.
Medium:Oiledlubricatedairanddryair (initial lubrication is required duringassembly)
Installation:To avoid damaging the sealing component,measures should be taken to avoid sharpedges duringinstallation.Initial lubrication can ensure the long working life of the sealing component.
Surface speed: <= 1 \ \mathbf { m } / \mathbf { s }
Standard:JB/T6657-93
Groove compliance:JB/T6656-93
Features:Good sealing effect,easy installation
Performance:Anti-aging,can effectively preventoilleakageandairleakage
| Specification | Specification | Specification |
| 16×24×5 | 32×42×6 | 60×72×7 |
| 18×26×5 | 35×45×6 | 63×75×7 |
| 20×28×5 | 38×48x6 | 65×77×7 |
| 22×30×5 | 40×50×6 | 75×87×7 |
| 24×32×5 | 45×55×6 | 80×92×7 |
| 28×36×5 | 50×62×7 | |
| 30×40×6 | 55×67×7 | |
E4CYLINDERPISTONSEALINGRING
The E4 type piston seal isa lip-shaped seal specifically designed for pneumatic equipment.It is easy to install and has excellent sealing performance,suitable forcylinderswith buffering functions.The E4 typeconforms to the cylinderdiameters specified byISO3320 and CETOPRP52P,RP43P,andRP53P standards. D
Workingmedium:Oil-lubricated air, dryairandoil-freeair.(Initial lubrication is required during assembly)
Operating speed: <= 1 \mathbf { m } / \mathbf { s } の
| Specification | Specification | Specification |
| 32×24×5.5 | 80×68×8.5 | 150×135×10 |
| 40×30×7 | 100×88×8.5 | 160×145×10 |
| 50×40×7 | 125×110×10 | 200×180×14 |
| 63×53×7 | 140×125×10 | 250×230×14 |
HCTYPEDUST-PROOF SEALING RINGFOR CYLINDER
The HC rubber sealing ring is a type of buffer sealing component specifically designed for pneumatic equipment.It is easy to install and has excellent sealing performance.It is suitable forcylinders with buffering functions.
Medium:Oiled lubricated air,dryair, andair without oil (initial assembly must be lubricated)
8
| Specification | Specification | Specification |
| 16×22 | 28×36 | 45×55 |
| 20×28 | 35×45 | 55×65 |
PPDSUNFLOWERPISTONRING
ThePPD type isa bidirectional sealed cylinder pistonring.Compared with the O-ring,ithas better friction properties and cross-sectional design, which can avoid distortion and rotation damage. Itisused for standard cylinders,small stroke cylinders,and thin-typecylinders.
Working medium:Air containing lubricating oil and dryoil-freeair (initial assembly requires lubrication)
Installation:This type of pneumatic seal can easilybe fittedonto thepistonand inserted into the groove.Toavoid damaging the seal,anappropriate measure should be taken to avoid sharp edges during installation.In theabsenceofoil lubrication,itis important to havea complete lubricating film on the surfaceoftheseal,whichshouldbedonebefore assembly to ensure the long service life of the seal.
Repetitive speed: <= 1 ~ { m / s }
Assemblyanddisassemblydiagram
Careful installation and proper initial lubrication are crucial factors ensuring that the sealing components can reach their designed lifespan.
Pushing the piston seal to the point wherea force-bearingareais formed
4.First thelpistonseal 5.After-the piston is in 1.Push the piston seal 3.Apply lubricating entersthe groove at one end, place,ontinuelto apply in the same direction with 2.Remove the grease to the exterior and then the other end is lubricating grease on the two fingers held together. old piston seal. of the new piston. pulled to position the piston seal. surface of the piston seal.
| Specification | Specification | Specification |
| 16×11.4×1.6 | 32×24x2.8 | 63×53×3.6 |
| 20×14×2.2 | 40×32×3 | 80×65×5.6 |
| 25×17×2.8 | 50×40x3.6 | 100×85×5.6 |
CYLINDERBURRBUFFERING SEALINGRING
The burr buffer ring is a buffer sealing component for thepiston rod of the cylinder.
Product features:It has good frictional properties and aunique shape design that can prevent cylinder body noise and impact penetration through simple grooves.It has an effective manufacturing cost and ismainlyused forSC standardcylinders.
Workingmedium:Oiled lubricated air,dry air,andairwithout oil (initial assembly lubrication)
Surface speed: <= 1 ~ { m / s }
| Specification | Specification | Specification |
| 16×22×4.5 | 35×45×6 | 55×65×7 |
| 20×28×4.5 | 45×55×6 | |
| 28×36×5 | 48×58x7 | |
DOP/FC CYLINDER DUSTSEALRING
DOP/FC is a dust-proof sealing component for the pistonrod of acylinder.The sealing component has avery small cross-section,exhibits good friction properties and a unique end face design,and is used forstandardcylinders,smallcylinders,etc.
Installation instructions: To prevent the sealing lipfrombeingdamaged,measuresshouldbe taken toavoid sharpedgesduringinstallation.Keepthe surface of the pistonrod cleanand free of impurities. Thisshould be done before assembly to ensure that the sealing component has a long service life.
Medium:Compressed air Repetitive speed: <= 1 ~ { m / s }
| Specification | Specification | Specification |
| 6x10x3.5 | 20×28×5.5 | 40×50×6.5 |
| 8×12×3.5 | 22×30×5.5 | 45×55×6.5 |
| 10×14×3.5 | 25×33×5.5 | 50×60×6.5 |
| 12×16×3.5 | 30×38×6.5 | 55×65×6.5 |
| 14×18×3.5 | 30×40×6.5 | 60×70×6.5 |
| 16×24×5.5 | 32x42×6.5 | 70×80×6.5 |
| 20×26×3.5 | 35×45×6.5 | |
K25PNEUMATICPISTONSEAL
K25 is a double-acting piston seal,composed of a steel plate that is vulcanized with elastic nitrile rubber using a special production method.
Product advantages:It can accommodate a complete piston with a wide size range.Due to the geometric shape ofthe sealing lip,it has low friction and smooth operation It can be easily fixed on the piston rod without the need for additional sealing elements.It has a long service life and is an economical sealing solution.
Installation:Push the K25 onto the piston facing the pull rod's clamping flange and secure it.The nut must be safe and reliable.The sliding surface and the cylinder diameter must be lubricated.During the installation process, this oil must not react with the sealing components.
| Specification | Specification | Specification |
| 20×5.2×8 | 75×12×22.5 | 127×19.05×25.4 |
| 25×8×12 | 80×16×25 | 130×20×29 |
| 25.4×6.35×12.7 | 80×12×25 | 140×20×30 |
| 26×8×12 | 80×16×22.5 | 150×20×30 |
| 32×8×15 | 80×20×22.5 | 160×27×31 |
| 35×8×15 | 90×16×25 | 160×20×30 |
| 36×8×15 | 100×16×25 | 180×27×31 |
| 40×10×18 | 100×20×25 | 190×20×30 |
| 50×10×18 | 100×12×25 | 190×12×35 |
| 50×16×20.5 | 100×20×26 | 200×27×35 |
| 60×12×22 | 102×16×25 | 200×20×35 |
| 62×15×22 | 110×18×25 | 200×20×30 |
| 63×12×22 | 125×20×30 | 200×30×35 |
| 70×12×22 | 125×20×26 | |
| 75×15×22 | 125×18×30 | |
PRODUCTDISPLAY
PRODUCTDISPLAY
PRODUCTDISPLAY
PRODUCTDISPLAY
APPLICATIONFIELD
APPLICATIONFIELD
--CONTACT US--
Address:Wencheng Development Zone, Jing County,Hengshui City,Hebei Province
Email: sany0ng15803388656@163.com
Telephone: + 8 6 \ 1 5 8 0 3 3 8 8 6 5 6
Wechat/WhatsApp: + 8 6 15803388656
9Website:https://hbsanyong.en.alibaba.com
