该页无缩略图
Clamping Nuts Naming and Coding Rules
Hook Wrench Naming and Coding Rules
Double Angle Head 90°
BT40-ColletER25、ER32
Performance parameters
| OrderingCode | Toolholder | Torqmmax. | Rev.max. | Gearratio | Coolant | Weight |
| BT40-DW-ER25-187-D-NC | 2xER25 | 30 | 8000 | 1:1 | without | 7.5 |
| BT40-DW-ER25-187-D-EC | 2xER25 | 30 | 8000 | 1:1 | external | 7.5 |
| BT40-DW-ER32-187-D-NC | 2xER32 | 70 | 6500 | 1:1 | without | 8.5 |
| BT40-DW-ER32-187-D-EC | 2xER32 | 70 | 6500 | 1:1 | external | 8.5 |
Dimensional parameters
| OrderingCode | Dimension(mm) | |||||||||
| 0E | L3 | L4 | L | L1 | L2 | H | A | Sw | Stock | |
| BT40-DW-ER25-187-D-NC | 125 | 62 | 62 | 187 | 80 | 39 | 78 | 65 | 18 | |
| BT40-DW-ER25-187-D-EC | 125 | 62 | 62 | 187 | 80 | 39 | 78 | 65 | 18 | 。 |
| BT40-DW-ER32-187-D-NC | 152 | 71.2 | 71.2 | 187 | 80 | 39 | 78 | 65 | 18 | |
| BT40-DW-ER32-187-D-EC | 152 | 71.2 | 71.2 | 187 | 80 | 39 | 78 | 65 | 18 | 。 |
Double Angle Head 90°
BT50-ColletER25、ER32、ER40
Performance parameters
| OrderingCode | Toolholder | Torque max. | Rev.max | Gearratio | Coolant | Weight |
| BT50-DW-ER25-190-D-NC | 2 xER25 | 30 | 8000 | 1:1 | without | 11.5 |
| BT50-DW-ER25-190-D-EC | 2x ER25 | 30 | 8000 | 1:1 | external | 11.5 |
| BT50-DW-ER32-190-D-NC | 2x ER32 | 70 | 6500 | 1:1 | without | 13.5 |
| BT50-DW-ER32-190-D-EC | 2xER32 | 70 | 6500 | 1:1 | external | 13.5 |
| BT50-DW-ER40-225-D-NC | 2x ER40 | 150 | 4000 | 1:1 | without | 20.0 |
| BT50-DW-ER40-225-D-EC | 2x ER40 | 150 | 4000 | 1:1 | external | 20.0 |
Dimensional parameters
| OrderingCode | Dimension(mm) | ||||||||
| 0E | L3 | L4 | L | L1 | L2 | H | A | Sw Stock | |
| BT50-DW-ER25-190-D-NC | 125 | 62 | 62 | 190 | 70 | 34 | 68 80 | 18 | |
| BT50-DW-ER25-190-D-EC | 125 | 62 | 62 | 190 | 70 | 34 68 | 80 | 18 | 。 |
| BT50-DW-ER32-190-D-NC | 152 | 71.2 | 71.2 | 190 | 70 | 39 78 | 80 | 18 | |
| BT50-DW-ER32-190-D-EC | 152 | 71.2 | 71.2 | 190 | 70 | 39 | 78 80 | 18 | |
| BT50-DW-ER40-225-D-NC | 210 | 103 | 103 | 225 | 109 | 58 | 108 80 | 18 | 。 |
| BT50-DW-ER40-225-D-EC | 210 | 103 | 103 | 225 | 109 | 58 | 108 80 | 18 | |
Angle Head 90°
BT40-ColletER16、ER25、ER32
Performance parameters
| OrderingCode | Toolholder | Torque max. | Rev.max. | Gearratio | Coolant | Weight |
| BT40-SW-ER16-187-S-NC | ER16 | 12 | 10000 | 1:1 | without | 6.0 |
| BT40-SW-ER16-187-S-EC | ER16 | 12 | 10000 | 1:1 | external | 6.0 |
| BT40-SW-ER16-187-S-IC | ER 16 | 12 | 10000 | 1:1 | internal | 6.0 |
| BT40-SW-ER25-187-S-NC | ER25 | 30 | 8000 | 1:1 | without | 6.5 |
| BT40-SW-ER25-187-S-EC | ER25 | 30 | 8000 | 1:1 | external | 6.5 |
| BT40-SW-ER25-187-S-IC | ER25 | 30 | 8000 | 1:1 | internal | 6.5 |
| BT40-SW-ER32-187-S-NC | ER32 | 70 | 6500 | 1:1 | without | 8.0 |
| BT40-SW-ER32-187-S-EC | ER32 | 70 | 6500 | 1:1 | external | 8.0 |
| BT40-SW-ER32-187-S-IC | ER32 | 70 | 6500 | 1:1 | internal | 8.0 |
Dimensional parameters
| OrderingCode | Dimension(mm) | |||||||||
| L3 | L4 | L | L1 | L2 | H | A | SW | Stock | ||
| BT40-SW-ER16-187-S-NC | 91 | 29 | 45 | 187 | 80 | 22 | 44 | 65 | 18 | |
| BT40-SW-ER16-187-S-EC | 96 | 44 | 50 | 187 | 80 | 22 | 44 | 65 | 18 | 。 |
| BT40-SW-ER16-187-S-IC | 96 | 44 | 50 | 187 | 80 | 22 | 44 | 65 | 18 | |
| BT40-SW-ER25-187-S-NC | 110 | 41.5 | 57.5 | 187 | 80 | 34 | 68 | 65 | 18 | 。 |
| BT40-SW-ER25-187-S-EC | 120 | 52 | 63 | 187 | 80 | 34 | 68 | 65 | 18 | 。 |
| BT40-SW-ER25-187-S-IC | 120 | 52 | 63 | 187 | 80 | 34 | 68 | 65 | 18 | 。 |
| BT40-SW-ER32-187-S-NC | 145 | 61 | 70 | 187 | 80 | 39 | 78 | 65 | 18 | 。 |
| BT40-SW-ER32-187-S-EC | 155 | 75 | 75 | 187 | 80 | 39 | 78 | 65 | 18 | |
| BT40-SW-ER32-187-S-IC | 155 | 75 | 75 | 187 | 80 | 39 | 78 | 65 | 18 | 。 |
Angle Head 90°
BT50-ColletER25、ER32、ER40
Performance parameters
| OrderingCode | Toolholder | Torque max. | Rev.max. | Gearratio | Coolant | Weight |
| BT50-SW-ER25-190-S-NC | ER25 | 30 | 8000 | 1:1 | without | 10.5 |
| BT50-SW-ER25-190-S-EC | ER25 | 30 | 8000 | 1:1 | external | 10.5 |
| BT50-SW-ER25-190-S-IC | ER 25 | 30 | 8000 | 1:1 | internal | 10.5 |
| BT50-SW-ER32-190-S-NC | ER 32 | 70 | 6500 | 1:1 | without | 12.0 |
| BT50-SW-ER32-190-S-EC | ER 32 | 70 | 6500 | 1:1 | external | 12.0 |
| BT50-SW-ER32-190-S-IC | ER32 | 70 | 6500 | 1:1 | internal | 12.0 |
| BT50-SW-ER40-225-S-NC | ER40 | 150 | 5000 | 1:1 | without | 18.0 |
| BT50-SW-ER40-225-S-EC | ER 40 | 150 | 5000 | 1:1 | external | 18.0 |
| BT50-SW-ER40-225-S-IC | ER40 | 150 | 5000 | 1:1 | internal | 18.0 |
Dimensional parameters
| OrderingCode | Dimension(mm) | ||||||||
| DE | L3 | L4 | L | L1 | L2 | H | A | Sw Stock | |
| BT50-SW-ER25-190-S-NC | 110 | 41.5 | 57.5 | 190 | 75 | 34 | 68 80 | 18 | |
| BT50-SW-ER25-190-S-EC | 120 | 52 | 63 | 190 | 75 | 34 68 | 80 | 18 | 。 |
| BT50-SW-ER25-190-S-IC | 120 | 52 | 63 | 190 | 75 | 34 68 | 80 | 18 | |
| BT50-SW-ER32-190-S-NC | 145 | 61 | 70 | 190 | 75 | 39 78 | 80 | 18 | 。 |
| BT50-SW-ER32-190-S-EC | 155 | 75 | 75 | 190 | 75 | 39 | 78 80 | 18 | 。 |
| BT50-SW-ER32-190-S-IC | 155 | 75 | 75 | 190 | 75 | 39 | 78 80 | 18 | 。 |
| BT50-SW-ER40-225-S-NC | 195 | 81 | 92 | 225 | 109 | 52 | 104 80 | 18 | |
| BT50-SW-ER40-225-S-EC | 195 | 81 | 96 | 225 | 109 | 52 | 104 80 | 18 | 。 |
| BT50-SW-ER40-225-S-IC | 195 | 81 | 96 | 225 | 109 | 52 | 104 80 | 18 | 。 |
Angle Head, Adjustable 0-98°
BT40-Collet ER20、ER25
T
Performance parameters
| OrderingCode | Toolholder | Torqummax. | Rev.max. | Gearratio | Coolant | Weight |
| BT40-WS-ER20-196-S-NC | ER20 | 15 | 8000 | 1:1 | without | 8.0 |
| BT40-WS-ER20-196-S-IC | ER20 | 15 | 8000 | 1:1 | internal | 8.0 |
| BT40-WS-ER20-196-S-NC-2 | ER20 | 15 | 15000 | 1:2.25 | without | 8.0 |
| BT40-WS-ER20-196-S-IC-2 | ER20 | 15 | 15000 | 1:2.25 | internal | 8.0 |
| BT40-WS-ER25-202-S-NC | ER25 | 30 | 7000 | 1:1 | without | 9.6 |
| BT40-WS-ER25-202-S-IC | ER25 | 30 | 7000 | 1:1 | internal | 9.6 |
| BT40-WS-ER25-202-S-NC-2 | ER25 | 30 | 13500 | 1:2.25 | without | 9.6 |
| BT40-WS-ER25-202-S-IC-2 | ER25 | 30 | 13500 | 1:2.25 | internal | 9.6 |
Dimensional parameters
| Ordering Code | Dimension(mm) | |||||||
| L2 | L4 | L | L1 | H | A | sw | Stock | |
| BT40-WS-ER20-196-S-NC | 75 | 20 | 196 | 100 | 96 | 65 | 18 | |
| BT40-WS-ER20-196-S-IC | 75 | 20 | 196 | 100 | 96 | 65 | 18 | 。 |
| BT40-WS-ER20-196-S-NC-2 | 75 | 20 | 196 | 100 | 96 | 65 | 18 | 。 |
| BT40-WS-ER20-196-S-IC-2 | 75 | 20 | 196 | 100 | 96 | 65 | 18 | |
| BT40-WS-ER25-202-S-NC | 84 | 25 | 202 | 100 | 111 | 65 | 18 | |
| BT40-WS-ER25-202-S-IC | 84 | 25 | 202 | 100 | 111 | 65 | 18 | 。 |
| BT40-WS-ER25-202-S-NC-2 | 84 | 25 | 202 | 100 | 111 | 65 | 18 | |
| BT40-WS-ER25-202-S-IC-2 | 84 | 25 | 202 | 100 | 111 | 65 | 18 | 。 |
Angle Head, Adjustable 0-98°
BT50-ColletER25、ER32
Performance parameters
| Ordering Code | Toolholder | Torque max. (Nm) | Rev.max. (RPM) | Gearratio | Coolant | Weight (kg) |
| BT50-WS-ER25-205-S-NC | ER25 | 30 | 7000 | 1:1 | without | 14 |
| BT50-WS-ER25-205-S-IC | ER25 | 30 | 7000 | 1:1 | internal | 14 |
| BT50-WS-ER25-205-S-NC-2 | ER25 | 30 | 13500 | 1:2.25 | without | 14 |
| BT50-WS-ER25-205-S-IC-2 | ER25 | 30 | 13500 | 1:2.25 | internal | 14 |
| BT50-WS-ER32-225-S-NC | ER32 | 70 | 6000 | 1:1 | without | 16 |
| BT50-WS-ER32-225-S-IC | ER32 | 70 | 6000 | 1:1 | internal | 16 |
Dimensional parameters
| OrderingCode | Dimension(mm) | |||||||
| L2 | L4 | L | L1 | H | A | Sw | Stock | |
| BT50-WS-ER25-205-S-NC | 84 | 25 | 205 | 100 | 111 | 80 | 18 | 。 |
| BT50-WS-ER25-205-S-IC | 84 | 25 | 205 | 100 | 111 | 80 | 18 | 。 |
| BT50-WS-ER25-205-S-NC-2 | 84 | 25 | 205 | 100 | 111 | 80 | 18 | |
| BT50-WS-ER25-205-S-IC-2 | 84 | 25 | 205 | 100 | 111 | 80 | 18 | 。 |
| BT50-WS-ER32-225-S-NC | 95 | 25 | 225 | 109 | 132 | 80 | 18 | 。 |
| BT50-WS-ER32-225-S-IC | 95 | 25 | 225 | 109 | 132 | 80 | 18 | 。 |
Angle Head 90°, Offset Type
BT40-ColletER25、ER32
Performance parameters
| OrderingCode | Toolholder | Torquemax. | Rev.max. | Gearratio | Coolant | Weight |
| BT40-ZW-ER25-187-S-NC | ER25 | 30 | 8000 | 1:1 | without | 6.5 |
| BT40-ZW-ER25-187-S-EC | ER25 | 30 | 8000 | 1:1 | external | 6.5 |
| BT40-ZW-ER25-187-S-IC | ER25 | 30 | 8000 | 1:1 | internal | 6.5 |
| BT40-ZW-ER32-205-S-NC | ER32 | 70 | 6000 | 1:1 | without | 8.5 |
| BT40-ZW-ER32-205-S-EC | ER32 | 70 | 6000 | 1:1 | external | 8.5 |
| BT40-ZW-ER32-205-S-IC | ER32 | 70 | 6000 | 1:1 | internal | 8.5 |
Dimensional parameters
| OrderingCode | Dimension(mm) | ||||||||
| DE | L3 | L4 | L | L1 | L2 | H | A | SW Stock | |
| BT40-ZW-ER25-187-S-NC | 103 | 57 | 35.8 | 187 | 80 | 28.5 | 57 | 65 | 18 。 |
| BT40-ZW-ER25-187-S-EC | 103 | 57 | 41.6 | 187 | 80 | 28.5 57 | 65 | 18 | |
| BT40-ZW-ER25-187-S-IC | 103 | 57 | 41.6 | 187 | 80 | 28.5 | 57 65 | 18 | |
| BT40-ZW-ER32-205-S-NC | 128 | 77.5 | 32.2 | 205 | 100 | 38,0 | 76 65 | 18 | 。 |
| BT40-ZW-ER32-205-S-EC | 128 | 77.5 | 38 | 205 | 100 | 38,0 | 76 | 65 18 | 。 |
| BT40-ZW-ER32-205-S-IC | 128 | 77.5 | 38 | 205 | 100 | 38,0 | 76 | 65 18 | |
Stock 0 Available Upon Order
Angle Head 90°, Offset Type
BT50-ColletER25、ER32、ER40
Performance parameters
| OrderingCode | Toolholder | Torque max. | Rev.max. | Gearratio | Coolant | Weight |
| BT50-ZW-ER25-195-S-NC | ER25 | 30 | 8000 | 1:1 | without | 11.5 |
| BT50-ZW-ER25-195-S-EC | ER25 | 30 | 8000 | 1:1 | external | 11.5 |
| BT50-ZW-ER25-195-S-IC | ER25 | 30 | 8000 | 1:1 | internal | 11.5 |
| BT50-ZW-ER32-210-S-NC | ER32 | 70 | 6000 | 1:1 | without | 14.0 |
| BT50-ZW-ER32-210-S-EC | ER32 | 70 | 6000 | 1:1 | external | 14.0 |
| BT50-ZW-ER32-210-S-IC | ER32 | 70 | 6000 | 1:1 | internal | 14.0 |
| BT50-ZW-ER40-270-S-NC | ER40 | 150 | 5000 | 1:1 | without | 19.0 |
| BT50-ZW-ER40-270-S-EC | ER40 | 150 | 5000 | 1:1 | external | 19.0 |
| BT50-ZW-ER40-270-S-IC | ER40 | 150 | 5000 | 1:1 | internal | 19..0 |
Dimensional parameters
| OrderingCode | Dimension(mm) | ||||||||
| L3 | L4 | L | L1 | L2 | H | A SW | Stock | ||
| BT50-ZW-ER25-195-S-NC | 103 | 57 | 35.8 | 195 | 79 | 28.5 | 57 80 | 18 | |
| BT50-ZW-ER25-195-S-EC | 103 | 57 | 41.6 | 195 | 79 | 28.5 57 | 80 | 18 | 。 |
| BT50-ZW-ER25-195-S-IC | 103 | 57 | 41.6 | 195 | 79 | 28.5 57 | 80 | 18 | |
| BT50-ZW-ER32-210-S-NC | 128 | 77.5 | 32.2 | 210 | 94 | 38 | 76 80 | 18 | 。 |
| BT50-ZW-ER32-210-S-EC | 128 | 77.5 | 38 | 210 | 94 | 38 | 76 80 | 18 | 。 |
| BT50-ZW-ER32-210-S-IC | 128 | 77.5 | 38 | 210 | 94 | 38 | 76 80 | 18 | 。 |
| BT50-ZW-ER40-270-S-NC | 140 | 89 | 31 | 270 | 110 | 52 | 104 80 | 18 | |
| BT50-ZW-ER40-270-S-EC | 140 | 89 | 34.8 | 270 | 110 | 52 | 104 80 | 18 | 。 |
| BT50-ZW-ER40-270-S-IC | 140 | 89 | 34.8 | 270 | 110 | 52 | 104 | 80 18 | 。 |
Angle Head 90°, Offset Slim Type
BT40-ColletER11、ER20、ER25
Performance parameters
| OrderingCode | Toolholder | Torqummax. | Rev. m)x. | Gearratio | Coolant | Weight |
| BT40-ZWS-ER11-220-S-NC | ER11 | 6 | 12000 | 1:1.67 | without | 7.0 |
| BT40-ZWS-ER20-232-S-NC | ER20 | 15 | 10000 | 1:1 | without | 6.0 |
| BT40-ZWS-ER25-222-S-NC | ER25 | 30 | 8000 | 1:1 | without | 6.5 |
| BT40-ZWS-ER25-222-S-EC | ER25 | 30 | 8000 | 1:1 | external | 6.5 |
Dimensional parameters
| OrderingCode | Dimension(mm) | |||||||||
| L3 | L4 | L | L1 | L2 | H | A | Sw Stock | |||
| BT40-ZWS-ER11-220-S-NC | 50 | 49 | 8 | 220 | 38 | 20 | 36 | 65 | 18 | |
| BT40-ZWS-ER20-232-S-NC | 75 | 54.5 | 11.2 | 232 | 80 | 24 | 48 | 65 | 18 | |
| BT40-ZWS-ER25-222-S-NC | 82 | 65 | 10 | 222 | 76 | 28 | 56 | 65 | 18 | 。 |
| BT40-ZWS-ER25-222-S-EC | 82 | 65 | 10 | 222 | 76 | 28 | 56 | 65 | 18 | 。 |
Angle Head 9 0 ^ { \circ } , Offset Slim Type
BT50-ColletER11、ER25、ER32
Performance parameters
| OrderingCode | Toolholder | Torque max. | Rev.max. | Gearratio | Coolant | Weight |
| BT50-ZWS-ER11-237.5-S-NC | ER11 | 6 | 12000 | 1:1.67 | without | 11.0 |
| BT50-ZWS-ER25-225-S-NC | ER25 | 30 | 8000 | 1:1 | without | 12.5 |
| BT50-ZWS-ER25-225-S-EC | ER25 | 30 | 8000 | 1:1 | external | 12.5 |
| BT50-ZWS-ER32-295-S-NC | ER32 | 70 | 6000 | 1:1 | without | 13.5 |
| BT50-ZWS-ER32-295-S-EC | ER32 | 70 | 6000 | 1:1 | external | 13.5 |
Dimensional parameters
| OrderingCode | Dimension(mm) | |||||||||
| 0E | L3 | L4 | L | L1 | L2 | H | A | Sw | Stock | |
| BT50-ZWS-ER11-237.5-S-NC | 50 | 49 | 8 | 237.5 | 38 | 20 | 36 | 80 | 18 | 。 |
| BT50-ZWS-ER25-225-S-NC | 82 | 65 | 10 | 225 | 76 | 28 | 56 | 80 | 18 | 。 |
| BT50-ZWS-ER25-225-S-EC | 82 | 65 | 10 | 225 | 76 | 28 | 56 | 80 | 18 | 。 |
| BT50-ZWS-ER32-295-S-NC | 102 | 66 | 13 | 295 | 100 | 38 | 80 | 80 | 18 | 。 |
| BT50-ZWS-ER32-295-S-EC | 102 | 66 | 13 | 295 | 100 | 38 | 80 | 80 | 18 | |
Wrenches and Clamping Nuts
Wrenches for ER Clamping Nuts
| Ordering code | Size | Type | In Stock |
| TER11-N-MC | ER11 | inlying | 。 |
| TER16-N-MC | ER16 | inlying | 。 |
| TER20-N-MC | ER20 | inlying | 。 |
| TER25-N-MC | ER25 | inlying | 。 |
| TER32-N-MC | ER32 | inlying | 。 |
| TER40-N-MC | ER40 | inlying |
Stock 0 Available UponOrder
ER Clamping Nuts
| Ordering code | Size | Type | Internal coolant | In Stock |
| ER11-N-MC | ER11 | inlying | ： | |
| ER16-N-MC | ER16 | inlying | = | 。 |
| ER20-N-MC | ER20 | inlying | ： | |
| ER25-N-MC | ER25 | inlying | ： | 。 |
| ER32-N-MC | ER32 | inlying | · | |
| ER40-N-MC | ER40 | inlying | 。 | |
| ER16-N-IC-MC | ER16 | inlying | √ | 。 |
| ER20-N-IC-MC | ER20 | inlying | √ | 。 |
| ER25-N-IC-MC | ER25 | inlying | √ | |
| ER32-N-IC-MC | ER32 | inlying | √ | 。 |
| ER40-N-IC-MC | ER40 | inlying | √ | 。 |
Stock \bigcirc Available Upon Order
HookWrenchesto holdagainst
| Ordering code | Size | Type | DIN | In Stock |
| TER16-H-MC | ER16 | inlying | 1810-B | 。 |
| TER20-H-MC | ER20 | inlying | 1810-B | 。 |
| TER25-H-MC | ER25 | inlying | 1810-B | 。 |
| TER32-H-MC | ER32 | inlying | 1810-B | 。 |
| TER40-H-MC | ER40 | inlying | 1810-A | 。 |
●Stock \bigcirc Available UponOrder
Product Advantages
High torque
transmission,rigidity
and RPM\`s
Live Tools Naming and Coding Rules
| ①Connection Type |
| ④Effective Length |
| ③Output Shaft Number | |
| S | Single |
| D | Double |
| ②Production Style | |
| SU | 0°Live Tools |
| AU | 90°Live Tools |
| SO | 0° Offset Live Tools |
| AO | 90°Retracting Live Tools |
| AJ | Adjustable Live Tools |
| SB | Saw Blade Live Tools |
| Co | Combination Live Tools |
| ③Clamping Size |
| ③Type of Cooling | |
| NC | Non-Cooling |
| EC | External |
| IC | Internal |
Nut Wrench Naming and Coding Rules
Clamping Nuts Naming and Coding Rules
②Clamping Nuts
| ④Performance UpgradeCode | |
| Normal type | Omit |
| Upgradedtype | MC |
| ③Type of Cooling | |
| Internal | IC |
| Others | Omit |
Hook Wrench Naming and Coding Rules
BMT45
Straight Unit- Collet ER25
| Orderingcode | ToolholderTmax | (n1/m) | Gatar | Coolant | Revetrsion | wpindle | Nut wrench | Nut | stock | |
| BMT45-SU-ER25-49.5-S-EC | ER25 | 25 | 6500/6500 | 1:1 | EC | TER25-H-MC | TER25-N-MC | ER25-N-MC | ||
| BMT45-SU-ER25-49.5-S-IC | ER25 | 25 | 6500/6500 | 1:1 | ICE70bar | TER25-H-MC | TER25-N-MC | ER25-N-IC-MC | 。 |
●Stock 0 Available Upon Order
AngleUnit- Collet ER25
| Orderingcode | ToolholderTma | (R/M) | Gaear | Coolant | Revetrsion | wpindle | Nut wrench | Nut | stock | |
| BMT45-AU-ER25-65-S-EC | ER25 | 25 | 6500/6500 | 1:1 | EC | √ | TER25-H-MC TER25-N-MC | ER25-N-MC | ||
| BMT45-AU-ER25-65-S-IC | ER25 | 25 | 6500/6500 | 1:1 | ICE 70bar | √ | TER25-H-MC | TER25-N-MC | ER25-N-IC-MC | 。 |
●Stock 0 Available Upon Order
BMT55
Straight Unit- Collet ER32
| Orderingcode | ToolhlderTma | (R/M) | Gatar | Coolant | Reversion | spindle | Nutwrench | Nut | stock | |
| BMT55-SU-ER32-64.3-S-EC | ER32 | 70 | 6500/6500 | 1:1 | EC | TER32-H-MCTER32-N-MC | ER32-N-MC | 。 | ||
| BMT55-SU-ER32-64.3-S-IC | ER32 | 70 | 6500/6500 | 1:1 | ICE70bar | TER32-H-MC TER32-N-MCER32-N-IC-MC | 。 |
Stock 0 AvailableUponOrder
Angle Unit-Collet ER32
| Ordering code | Toolhlder rta | (1/M) | Gaear | Coolant | Revtertsion | Spinde | Nut wrench | Nut | stock | |
| BMT55-AU-ER32-70-S-EC | ER32 | 70 | 6500/6500 | 1:1 | EC | √ | TER32-H-MC | TER32-N-MC | ER32-N-MC | |
| BMT55-AU-ER32-70-S-IC | ER32 | 70 | 6500/6500 | 1:1 | ICE 70bar | √ | TER32-H-MC | TER32-N-MC | ER32-N-IC-MC |
●Stock 0 Available Upon Order
BMT65
StraightUnit-Collet ER32
| Orderingcode | Toolhoder m | (1/M) | Getar | Coolant | Reversion | spindle | Nut wrench | Nut | stock | |
| BMT65-SU-ER32-65-S-EC | ER32 | 70 | 10000/10000 | 1:1 | EC | TER32-H-MC TER32-N-MC | ER32-N-MC | |||
| BMT65-SU-ER32-65-S-IC | ER32 | 70 | 10000/10000 | 1:1 | ICE 70bar | TER32-H-MC TER32-N-MC | ER32-N-IC-MC | 。 |
●Stock 0 Available Upon Order
AngleUnit- Collet ER32
| Orderingcode | ToolholderTmaxe | (1/M) | Gear | Coolant | Reversion | Spindle | Nut wrench | Nut | stock | |
| BMT65-AU-ER32-72-S-EC | ER32 | 70 | 10000/10000 | 1:1 | EC | L | TER32-H-MCTER32-N-MC | ER32-N-MC | ||
| BMT65-AU-ER32-72-S-IC | ER32 | 70 | 10000/10000 | 1:1 | ICE 70bar | √ | TER32-H-MC TER32-N-MC ER32-N-IC-MC | 。 |
●Stock 0 Available Upon Order
Wrenches and Clamping Nuts
Wrenches for ER Clamping Nuts
| Ordering code | Size | Type | In Stock |
| TER25-N-MC | ER25 | inlying | |
| TER32-N-MC | ER32 | inlying | 。 |
ER Clamping Nuts
| Ordering code | Size | Type | Internat | In Stock |
| ER25-N-MC | ER25 | inlying | 。 | |
| ER32-N-MC | ER32 | inlying | - | 。 |
| ER25-N-IC-MC | ER25 | inlying | √ | 。 |
| ER32-N-IC-MC | ER32 | inlying | √ | 。 |
HookWrenches to hold against
| Ordering code | Size | Type | DIN | In Stock |
| TER25-H-MC | ER25 | inlying | 1810-B | |
| TER32-H-MC | ER32 | inlying | 1810-B | 。 |
Accessories
| P86 | P79 | P87 |
| OrderingCode | Dimension (mm) | Nut | Collets | Weight(kg) | Stock | ||||
| D | d | L1 | L | ||||||
| C12- | ER11M-100-S | 16 | 12 | 25 | 125 | ER11-M-S | ER11 | 0.12 | 。 |
| ER11M-150-S | 16 | 12 | 25 | 175 | ER11-M-S | ER11 | 0.14 | ||
| ER11M-100-S | 16 | 16 | 25 | 125 | ER11-M-S | ER11 | 0.14 | ||
| C16- | ER11M-150-S | 16 | 16 | 25 | 175 | ER11-M-S | ER11 | 0.22 | |
| ER16M-100-S | 22 | 16 | 36 | 136 | ER16-M-S | ER16 | 0.15 | ||
| ER16M-150-S | 22 | 16 | 36 | 186 | ER16-M-S | ER16 | 0.21 | 。 | |
| C20- | ER16M-100-S | 22 | 20 | 36 | 136 | ER16-M-S | ER16 | 0.24 | |
| ER16M-150-S | 22 | 20 | 36 | 186 | ER16-M-S | ER16 | 0.33 | ||
| ER20M-100-S | 28 | 20 | 42 | 142 | ER20-M-S | ER20 | 0.23 | ||
| ER20M-150-S | 28 | 20 | 42 | 192 | ER20-M-S | ER20 | 0.32 | ||
| ER20M-200-S | 28 | 20 | 42 | 242 | ER20-M-S | ER20 | 0.53 | ||
| ER25M-100-S | 35 | 20 | 50 | 150 | ER25-M-S | ER25 | 0.55 | ||
| C25- | ER20M-150-S | 28 | 25 | 42 | 192 | ER20-M-S | ER20 | 0.50 | 。 |
Notice: Wrenches and collets shallbe ordered separately.
Stock 0 Available Upon Order
| Accessories | ER11 | ER16 | ER20 | ER25 | ER32 | ER40 |
| Nut | ER11-A-S | ER16-A-S | ER20-A-S | ER25-UM/RD-S | ER32-UM/RD-S | ER40-UM/RD-S |
| Wrech | TER11-A-S | TER16-A-S | TER20-A-S | TER25-UMKM/RD-STER32-UMKM/RD-STER40-UMKM/RD-S |
Tapping Chuck Extensions
| OrderingCode | Apply Taps | Dimension (mm) | Nut | ColletsWeight(kg) Stock | |||||||
| D | dm | D1 | L | F1 | F2 | ||||||
| C16-V11-65-S | M1-M7 | 16 | 2.5-7.0 | 16 | 65 | 0.2 | 0.2 | ER11-M-S | ER11 | 0.22 | |
| P86 | P81 | P87 |
| Ordering Code | ApplyTaps | Dimension (mm) | Nut | Collets Weight(kg) | Stock | ||||||
| D | dm | D1 | L | f1 | F2 | ||||||
| C20-V20-85-S | M4-M12 | 34 | 3~10 | 20 | 85 | 0.5 | 0.5 | ER20-A-S | ER20 | 0.35 | |
| C25-V20-85-S | (No.8~7/16) | 34 | 3~10 | 25 | 85 | 0.5 | 0.5 | ER20-A-S | ER20 | 0.45 | 。 |
| C25-V32-110-S | (M4-M2/4) | 50 | 3~10 | 25 | 110 | 0.5 | 0.5 | ER32-UM/ | ER32 | 0.6 | |
Notice:Wrenches and collets shall be ordered separately.
Stock 0 Available Upon Order
| Accessories | ER11 | ER16 | ER20 | ER25 | ER32 | ER40 |
| Nut | ER11-A-S | ER16-A-S | ER20-A-S | ER25-UM/RD-S | ER32-UM/RD-S | ER40-UM/RD-S |
| Wrech | TER11-A-S | TER16-A-S | TER20-A-S | TER25-UMKM/RD-S TER32-UMKM/RD-STER40-UMKM/RD-S |
| Ordering Code | Dimension (mm) | Weight(kg) | Stock | ||||
| D | d | L1 | L | ||||
| C12- | SF3-160-S | 3 | 8 | 12 | 160 | 0.2 | |
| SF4-160-S | 4 | 8 | 12 | 160 | 0.21 | 0 | |
| C16- | SF3-160-S | 3 | 10 | 16 | 160 | 0.22 | 0 |
| SF4-160-S | 4 | 10 | 16 | 160 | 0.23 | ||
| SF5-160-S | 5 | 10 | 16 | 160 | 0.24 | ||
| SF6-160-S | 6 | 10 | 16 | 160 | 0.25 | 0 | |
| C20- | SF5-160-S | 5 | 14 | 20 | 160 | 0.4 | |
| SF6-160-S | 6 | 14 | 20 | 160 | 0.42 | 0 | |
| SF8-160-S | 8 | 14 | 20 | 160 | 0.44 | ||
| C25- | SF8-160-S | 8 | 20 | 25 | 160 | 0.6 | |
| SF10-160-S | 10 | 20 | 25 | 160 | 0.62 | ||
| SF12-160-S | 12 | 20 | 25 | 160 | 0.65 | 。 | |
| C32- | SF10-160-S | 10 | 27 | 32 | 160 | 0.78 | |
| SF12-160-S | 12 | 27 | 32 | 160 | 0.81 | ||
| SF16-160-S | 16 | 27 | 32 | 160 | 0.83 | ||
| SF20-160-S | 20 | 27 | 32 | 160 | 0.85 | 。 | |
Stock 0 Available Upon Order
Shrink Fit Extensions,3
| OrderingCode | Dimension (mm) | Stock | ||||
| DCONWs | DCONMS | BD1 | LF | |||
| C12- | SFS4-110-S | 4 | 12 | 10 | 110 | 。 |
| SFS4-110-S | 4 | 16 | 10 | 110 | 。 | |
| SFS4-200-S | 4 | 16 | 10 | 200 | ||
| SFS6-110-S | 6 | 16 | 12 | 110 | 。 | |
| SFS6-160-S | 6 | 16 | 12 | 160 | ||
| SFS6-200-S | 6 | 16 | 12 | 200 | ||
| SFS8-160-S | 8 | 16 | 14 | 160 | 。 | |
| SFS10-160-S | 10 | 16 | 16 | 160 | ||
| SFS4-110-S | 4 | 20 | 10 | 110 | ||
| C20- | SFS6-110-S | 6 | 20 | 12 | 110 | 。 |
| SFS6-160-S | 6 | 20 | 12 | 160 | ||
| SFS6-250-S | 6 | 20 | 12 | 250 | ||
| SFS8-110-S | 8 | 20 | 14 | 110 | ||
| SFS8-160-S | 8 | 20 | 14 | 160 | ||
| SFS8-200-S | 8 | 20 | 14 | 200 | 。 | |
| SFS10-110-S | 10 | 20 | 16 | 110 | 。 | |
| SFS10-160-S | 10 | 20 | 16 | 160 | ||
| SFS10-250-S | 10 | 20 | 16 | 250 | 。 | |
| SFS12-110-S | 12 | 20 | 18 | 110 | 。 | |
| C25- | SFS12-250-S | 12 | 25 | 18 | 250 | 。 |
| SFS16-250-S | 16 | 25 | 22 | 250 | ||
Feature
| Ordering Code | Dimension (mm) | Weight(kg) | ||
| D | L | |||
| ER | 11 | 11.50 | 18.5 | 0.01 |
| 16 | 17.00 | 27.5 | 0.03 | |
| 20 | 21.00 | 31.5 | 0.04 | |
| 25 | 26 | 34 | 0.06 | |
| 32 | 33 | 40 | 0.10 | |
| 40 | 41 | 46 | 0.25 | |
Spring Colle Precision
| Model | Chucking range |
| ER11 | 0.5mm |
| ER16/20/25/32/40 | 1mm |
| Grade | Range(mm) |
| A Class | ≤0.01mm |
| UP Class | ≤0.005mm |
Naming rule
| Ordering Code | Range(mm) | |
| ER11- | 1A-S | 1.0-0.5 |
| 1.5A-S | 1.5-1.0 | |
| 2A-S | 2.0-1.5 | |
| 2.5A-S | 2.5-2.0 | |
| 3A-S | 3.0-2.5 | |
| 3.5A-S | 3.5-3.0 | |
| 4A-S | 4.0-3.5 | |
| 4.5A-S | 4.5-4.0 | |
| 5A-S | 5.0-4.5 | |
| 5.5A-S | 5.5-5.0 | |
| 6A-S 6.5A-S | 6.0-5.5 | |
| 7A-S | 6.5-7.0 7.0-6.5 | |
| Range(mm) | Ordering Code | Range(mm) | Ordering Code | Range(mm) | |||
| 1.0-0.5 | 1A-S | 1.0-0.5 | 1A-S | 1.0-0.5 | |||
| 1.5-1.0 | 1.5A-S | 1.5-1.0 | 2A-S | 2.0-1.0 | |||
| 2.0-1.5 | 2A-S | 2.0-1.5 | 3A-S | 3.0-2.0 | |||
| 2.5-2.0 | 2.5A-S | 2.5-2.0 | 4A-S | 4.0-3.0 | |||
| 3.0-2.5 | 3A-S | 3.0-2.5 | 5A-S | 5.0-4.0 | |||
| 3.5-3.0 | 3.5A-S | 3.5-3.0 | 6A-S | 6.0-5.0 | |||
| 4.0-3.5 | 4A-S | 4.0-3.5 | ER20- 7A-S | 7.0-6.0 | |||
| 4.5-4.0 | 4.5A-S | 4.5-4.0 | 8A-S | 8.0-7.0 | |||
| 5.0-4.5 | ER16- 5A-S | 5.0-4.5 | 9A-S | 9.0-8.0 | |||
| 5.5-5.0 | 5.5A-S | 5.5-5.0 | 10A-S | 10-9.0 | |||
| 6.0-5.5 | 6A-S | 6.0-5.5 | 11A-S | 11-10 | |||
| 6.5-7.0 | 6.5A-S | 6.5-6.0 | 12A-S | 12-11 | |||
| 7.0-6.5 | 7A-S | 7.0-6.0 | 13A-S | 13-12 | |||
| 8A-S 9A-S | 8.0-7.0 9.0-8.0 | ||||||
| Range(mm) | 10A-S | 10-9.0 | Ordering Code | Range(mm) | |||
| 1.0-0.5 | 4A-S | 4.0-3.0 | |||||
| 2.0-1.0 | Ordering Code | 5A-S | 5.0-4.0 | ||||
| 3.0-2.0 | Range(mm) | 6A-S | 6.0-5.0 | ||||
| 4.0-3.0 | 1A-S | 1.0-0.5 | 7A-S | 7.0-6.0 | |||
| 5.0-4.0 | 2A-S | 2.0-1.0 | 8A-S | 8.0-7.0 | |||
| 6.0-5.0 | 3A-S | 3.0-2.0 | 9A-S | 9.0-8.0 | |||
| 7.0-6.0 | 4A-S | 4.0-3.0 | 10A-S | 10-9.0 | |||
| 8.0-7.0 | 5A-S | 5.0-4.0 | 11A-S | 11-10 | |||
| 9.0-8.0 | 6A-S | 6.0-5.0 | 12A-S | 12-11 | |||
| 10-9.0 | 7A-S | 7.0-6.0 | 13A-S | 13-12 | |||
| 11-10 | 8A-S | 8.0-7.0 | 14A-S | 14-13 | |||
| 12-11 | 9A-S | 9.0-8.0 | ER40- 15A-S | 15-14 | |||
| 13-12 | 10A-S ER32- | 10-9.0 | 16A-S | 16-15 | |||
| 14-13 | 11A-S | 11-10 | 17A-S | 17-16 | |||
| 15-14 16-15 | 12A-S 13A-S | 12-11 | 18A-S | 18-17 | |||
| 14A-S | 13-12 14-13 | 19A-S 20A-S | 19-18 20-19 | ||||
| 15A-S | 21A-S | 21-20 | |||||
| 16A-S | 15-14 16-15 | 22A-S | 22-21 | ||||
| 17A-S | 23A-S | 23-22 | |||||
| 18A-S | 17-16 18-17 | 24A-S | 24-23 | ||||
| 19A-S | 19-18 | 25A-S | 25-24 | ||||
| 20A-S | 20-19 | 26A-S | 26-25 | ||||
| OrderingCode | Range(mm) | |
| ER25- | 1A-S | 1.0-0.5 |
| 2A-S | 2.0-1.0 | |
| 3A-S | 3.0-2.0 | |
| 4A-S | 4.0-3.0 | |
| 5A-S | 5.0-4.0 | |
| 6A-S | 6.0-5.0 | |
| 7A-S | 7.0-6.0 | |
| 8A-S | 8.0-7.0 | |
| 9A-S | 9.0-8.0 | |
| 10A-S | 10-9.0 | |
| 11A-S | 11-10 | |
| 12A-S | 12-11 | |
| 13A-S | 13-12 | |
| 14A-S | 14-13 | |
| 15A-S | 15-14 | |
| 16A-S | 16-15 | |
ERPrecision Collet
| Ordering Code | Range(mm) | |
| ER11- | 2.5UP-S | 2.5-2.0 |
| 3UP-S | 3.0-2.5 | |
| 3.5UP-S | 3.5-3.0 | |
| 4UP-S | 4.0-3.5 | |
| 4.5UP-S | 4.5-4.0 | |
| 5UP-S | 5.0-4.5 | |
| 5.5UP-S | 5.5-5.0 | |
| 6UP-S | 6.0-5.5 | |
| 6.5UP-S | 6.5-7.0 | |
| 7UP-S | 7.0-6.5 | |
| OrderingCode | Range(mm) | |
| ER16- | 3UP-S | 3.0-2.0 |
| 4UP-S | 4.0-3.0 | |
| 5UP-S | 5.0-4.0 | |
| 6UP-S | 6.0-5.0 | |
| 7UP-S | 7.0-6.0 | |
| 8UP-S | 8.0-7.0 | |
| 9UP-S | 9.0-8.0 | |
| 10UP-S | 10-9.0 | |
| OrderingCode | Range(mm) | |
| ER20- | 3UP-S | 3.0-2.0 |
| 4UP-S | 4.0-3.0 | |
| 5UP-S | 5.0-4.0 | |
| 6UP-S | 6.0-5.0 | |
| 7UP-S | 7.0-6.0 | |
| 8UP-S | 8.0-7.0 | |
| 9UP-S | 9.0-8.0 | |
| 10UP-S | 10-9.0 | |
| 11UP-S | 11-10 | |
| 12UP-S | 12-11 | |
| 13UP-S | 13-12 | |
| Ordering Code | Range(mm) | |
| ER25- | 3UP-S | 3.0-2.0 |
| 4UP-S | 4.0-3.0 | |
| 5UP-S | 5.0-4.0 | |
| 6UP-S | 6.0-5.0 | |
| 7UP-S | 7.0-6.0 | |
| 8UP-S | 8.0-7.0 | |
| 9UP-S | 9.0-8.0 | |
| 10UP-S | 10-9.0 | |
| 11UP-S | 11-10 | |
| 12UP-S | 12-11 | |
| 13UP-S | 13-12 | |
| 14UP-S | 14-13 | |
| 15UP-S | 15-14 | |
| 16UP-S | 16-15 | |
| Ordering Code | Range(mm) | |
| ER32- | 3UP-S | 3.0-2.0 |
| 4UP-S | 4.0-3.0 | |
| 5UP-S | 5.0-4.0 | |
| 6UP-S | 6.0-5.0 | |
| 7UP-S | 7.0-6.0 | |
| 8UP-S | 8.0-7.0 | |
| 9UP-S | 9.0-8.0 | |
| 10UP-S | 10-9.0 | |
| 11UP-S | 11-10 | |
| 12UP-S | 12-11 | |
| 13UP-S | 13-12 | |
| 14UP-S | 14-13 | |
| 15UP-S | 15-14 | |
| 16UP-S | 16-15 | |
| 17UP-S | 17-16 | |
| 18UP-S | 18-17 | |
| 19UP-S | 19-18 | |
| 20UP-S | 20-19 | |
| OrderingCode | Range(mm) | |
| ER40- | 4UP-S | 4.0-3.0 |
| 5UP-S | 5.0-4.0 | |
| 6UP-S | 6.0-5.0 | |
| 7UP-S | 7.0-6.0 | |
| 8UP-S | 8.0-7.0 | |
| 9UP-S | 9.0-8.0 | |
| 10UP-S | 10-9.0 | |
| 11UP-S | 11-10 | |
| 12UP-S | 12-11 | |
| 13UP-S | 13-12 | |
| 14UP-S | 14-13 | |
| 15UP-S | 15-14 | |
| 16UP-S | 16-15 | |
| 17UP-S | 17-16 | |
| 18UP-S | 18-17 | |
| 19UP-S | 19-18 | |
| 20UP-S | 20-19 | |
| 21UP-S | 21-20 | |
| 22UP-S | 22-21 | |
| 23UP-S | 23-22 | |
| 24UP-S | 24-23 | |
| 25UP-S | 25-24 | |
| 26UP-S | 26-25 | |
| OrderingCode | Taps | |||||
| ISO529/IS02283 | DIN374/DIN376 JISB4430 | |||||
| ER16-4B3.2-S | ER20-4B3.2-S | ER25-4B3.2-S | M3 | |||
| ER16-5B4-S | ER20-5B4-S | ER25-5B4-S | M5 | M4 | ||
| ER16-5.5B4.5-S | ER20-5.5B4.5-S | ER25-5.5B4.5-S ER32-5.5B4.5-S | M5 | |||
| ER16-6B4.5-S | ER20-6B4.5-S | ER25-6B4.5-S ER32-6B4.5-S | M6 | |||
| ER16-6B4.9-S | ER20-6B4.9-S | ER25-6B4.9-S ER32-6B4.9-S | M8 | |||
| ER16-6.2B5-S | ER20-6.2B5-S | ER25-6.2B5-S ER32-6.2B5-S | M8 | |||
| ER16-6.3B5-S | ER20-6.3B5-S | ER25-6.3B5-S ER32-6.3B5-S | M6 | |||
| ER16-7B5.5-S | ER20-7B5.5-S | ER25-7B5.5-S ER32-7B5.5-S | M10 | M10 | ||
| ER16-8B6.2-S | ER20-8B6.2-S | ER25-8B6.2-S ER32-8B6.2-S ER25-8B6.3-S ER32-8B6.3-S | M11 | |||
| ER16-8B6.3-S | ER20-8B6.3-S | M10 | ||||
| ER16-8.5B6.5-S | ER20-8.5B6.5-S | ER25-8.5B6.5-S ER32-8.5B6.5-S ER25-9B7.1-S ER32-9B7.1-S | M12 | |||
| ER20-9B7.1-S ER20-10B8-S | ER25-10B8-S ER32-10B8-S | ER32-9B7.1-S ER32-10B8-S | M12 | M12 | ||
| ER20-10.5B8-S | ER25-10.5B8-S ER32-10.5B8-S | ER32-10.5B8-S | M10 | |||
| ER20-11B9-S | ER25-11B9-S ER32-11B9-S | ER32-11B9-S | M14 | M14 | ||
| ER20-12B9-S | ER25-12B9-S ER32-12B9-S | ER32-12B9-S | M16 | |||
| ER25-12.5B10-S ER32-12.5B10-S ER32-12.5B10-S | M16 | M16 | ||||
| ER32-14B11-S | ER32-14B11-S | M18 | M16 | |||
| ER32-14B11.2-S ER32-14B11.2-S | M18/M20 | M18 | M18 | |||
| ER32-15B12-S | ER32-15B12-S | M18 | ||||
| ER32-16B12-S | ER32-16B12-S | M20 | M20 | |||
| ER40-18B14-S | M24 | |||||
| ER40-20B16-S | M27/M30 | M27 | ||||
Notice: 1.The handle of the tap must be inserted into the square slot. 2.Please confirm the diameter of the taper shank and the size of the square before choosing the type.
ERCoolantCollet
| Ordering Code | Range(mm) | |
| ER11- | 3C-S | 3 |
| 3.5C-S | 3.5 | |
| 4C-S | 4 | |
| 4.5C-S | 4.5 | |
| 5C-S | 5 | |
| 5.5C-S | 5.5 | |
| 6C-S | 6 | |
| 6.5C-S | 6.5 | |
| 7C-S | 7 | |
| Ordering Code | Range(mm) | |
| ER16- | 3C-S | 3 |
| 4C-S | 4 | |
| 5C-S | 5 | |
| 6C-S | 6 | |
| 7C-S | 7 | |
| 8C-S | 8 | |
| 9C-S | 9 | |
| 10C-S | 10 | |
| OrderingCode | Range(mm) | |
| ER20- | 7C-S | 7 |
| 8C-S | 8 | |
| 9C-S | 9 | |
| 10C-S | 10 | |
| 11C-S | 11 | |
| 12C-S | 12 | |
| 13C-S | 13 | |
| Ordering Code | Range(mm) | |
| ER25- | 8C-S | 8 |
| 9C-S | 9 | |
| 10C-S | 10 | |
| 11C-S | 11 | |
| 12C-S | 12 | |
| 13C-S | 13 | |
| 14C-S | 14 | |
| 15C-S | 15 | |
| 16C-S | 16 | |
| OrderingCode | Range(mm) | |
| ER32- | 8C-S | 8 |
| 9C-S | 9 | |
| 10C-S | 10 | |
| 11C-S | 11 | |
| 12C-S | 12 | |
| 13C-S | 13 | |
| 14C-S | 14 | |
| 15C-S | 15 | |
| 16C-S | 16 | |
| 17C-S | 17 | |
| 18C-S | 18 | |
| 19C-S | 19 | |
| 20C-S | 20 | |
| Ordering Code | Range(mm) | |
| ER40- | 10C-S | 10 |
| 11C-S | 11 | |
| 12C-S | 12 | |
| 13C-S | 13 | |
| 14C-S | 14 | |
| 15C-S | 15 | |
| 16C-S | 16 | |
| 17C-S | 17 | |
| 18C-S | 18 | |
| 19C-S | 19 | |
| 20C-S | 20 | |
| 21C-S | 21 | |
| 22C-S | 22 | |
| 23C-S | 23 | |
| 24C-S | 24 | |
| 25C-S | 25 | |
| 26C-S | 26 | |
| Ordering Code | Dimension (mm) | Stock | ||
| D | dm | |||
| GC20- | 3A-S | 20 | 3 | 。 |
| 4A-S | 20 | 4 | 。 | |
| 5A-S | 20 | 5 | ||
| 6A-S | 20 | 6 | ||
| 8A-S | 20 | 8 | ||
| 10A-S | 20 | 10 | 。 | |
| 12A-S | 20 | 12 | 。 | |
| 14A-S | 20 | 14 | ||
| GC25 | 16A-S | 20 | 16 | 。 |
| 4A-S | 25 | 4 | ||
| 5A-S | 25 | 5 | ||
| 6A-S | 25 | 6 | ||
| 8A-S 10A-S | 25 25 | 8 | ||
| 12A-S | 25 | 10 | 。 | |
| 14A-S | 25 | 12 | ||
| 14 | ||||
| 16A-S | 25 | 16 | ||
| 18A-S | 25 | 18 | ||
| 20A-S | 25 | 20 | ||
| GC32- | 6A-S | 32 | 6 | 。 |
| 8A-S | 32 | 8 | ||
| 10A-S | 32 | 10 | ||
| 12A-S | 32 | 12 | 0 | |
| 14A-S | 32 | 14 | ||
| 16A-S | 32 | 16 | 。 | |
| 18A-S | 32 | 18 | ||
| 20A-S | 32 | 20 | 。 | |
| 24A-S | 32 | 24 | 。 | |
| 25A-S | 32 | 25 | 。 | |
GC Straight Collet
| Ordering Code | Dimension (mm) | Stock | ||
| D | dm | |||
| GC42- | 6A-S | 42 | 6 | 。 |
| 8A-S | 42 | 8 | ||
| 10A-S | 42 | 10 | 。 | |
| 12A-S | 42 | 12 | ||
| 14A-S | 42 | 14 | ||
| 16A-S | 42 | 16 | ||
| 18A-S | 42 | 18 | 。 | |
| 20A-S | 42 | 20 | ||
| 24A-S | 42 | 24 | 。 | |
| 25A-S 32A-S | 42 42 | 25 32 | 。 | |
| OrderingCode | Dimension (mm) | Stock | ||||
| DCONWS | DCONMS | LSC | OAL | |||
| ODHC12- | 3-S | 3 | 12 | 16.5 | 47.5 | |
| 4-S | 4 | 12 | 16.5 | 47.5 | 。 | |
| 5-S | 5 | 12 | 16.5 | 47.5 | 0 | |
| 6-S | 6 | 12 | 24 | 47.5 | 。 | |
| 8-S | 8 | 12 | 25 | 47.5 | ||
| ODHC20- | 3-S | 3 | 20 | 17.5 | 52.5 | 。 |
| 4-S | 4 | 20 | 17.5 | 52.5 | ||
| 5-S | 5 | 20 | 17.5 | 52.5 | ||
| 6-S | 6 | 20 | 25.5 | 52.5 | ||
| 7-S | 7 | 20 | 28 | 52.5 | ||
| 8-S | 8 | 20 | 28 | 52.5 | ||
| 9-S | 9 | 20 | 32.5 | 52.5 | ||
| 10-S | 10 | 20 | 32.5 | 52.5 | ||
| 11-S | 11 | 20 | 36 | 52.5 | 。 | |
| 12-S | 12 | 20 | 36 | 52.5 | ||
| 13-S | 13 | 20 | 36.5 | 52.5 | 。 | |
| 14-S | 14 | 20 | 37 | 52.5 | ||
| 15-S | 15 | 20 | 37 | 52.5 | ||
| 16-S | 16 | 20 | 37.5 | 52.5 | ||
| ODHC32- | 6-S | 6 | 32 | 25.5 | 63.5 | |
| 8-S | 8 | 32 | 27.5 | 63.5 | ||
| 10-S | 10 | 32 | 30.5 | 63.5 | 。 | |
| 12-S | 12 | 32 | 30.5 | 63.5 | ||
| 14-S | 14 | 32 | 32.5 | 63.5 | 。 | |
| 16-S | 16 | 32 | 40.5 | 63.5 | 。 | |
| 18-S | 18 | 32 | 40.5 | 63.5 | ||
| 20-S | 20 | 32 | 40.5 | 63.5 | ||
| 25-S | 25 | 32 | 48.5 | 63.5 | 。 | |
Clamping Nut For ER Collet Chuck
| Ordering Code | Figure | Dimension (mm) M | |||
| D | L | ||||
| ER | 11-A-S | A | 19 | 11.3 | M14XP0.75 |
| 16-A-S | A | 28 | 17.5 | M22XP1.5 | |
| 20-A-S | A | 34 | 19 | M 25XP1.5 | |
| 25-UM/RD-S | B | 42 | 20 | M32XP1.5 | |
| 32-UM/RD-S | B | 50 | 23 | M 40XP1.5 | |
| 40-UM/RD-S | B | 63 | 26 | M50XP1.5 | |
| 11-M-S | C | 16 | 12 | M13XP0.75 | |
| 16-M-S | 22 | 18 | M19XP1.0 | ||
| 20-M-S | C | 28 | 19 | M 24XP1.0 | |
| 25-M-S | c | 35 | 20 | M30XP1.0 | |
| Ordering Code | Figure | Nuts | Weight(kg) | |
| TER | 11-A-S | A | ER11-A | 0.1 |
| 16-A-S | A | ER16-A | 0.1 | |
| 20-A-S | A | ER20-A | 0.1 | |
| 25UMKM/RD-S | B | ER25-UM/RD | 0.2 | |
| 32UMKM/RD-S | B | ER32-UM/RD | 0.2 | |
| 40UMKM/RD-S | B | ER40-UM/RD | 0.3 | |
| 11-M-S | C | ER11-M | 0.2 | |
| 16-M-S | C | ER16-M | 0.2 | |
| 20-M-S | C | ER20-M | 0.2 | |
| 25-M-S | C | ER25-M | 0.2 |
WrenchForTool Holder GLC
| Ordering Code | Toolholder (mm) | Weight(kg) | |
| TGLC | 20-S | GLC20 | 0.1 |
| 32-S | GLC32 | 0.1 | |
| 42-S | GLC42 | 0.2 | |
Allen Key
| Ordering Code | Dimension (mm) | ||
| d | L | h | |
| TH03L-S | 3 | 65 | 20 |
| TH04L-S | 4 | 70 | 25 |
| TH05L-S | 5 | 78 | 28 |
| TH06L-S | 6 | 85 | 32 |
| TH08L-S | 8 | 100 | 36 |
| TH10L-S | 10 | 105 | 40 |
| TH12L-S | 12 | 113 | 44 |
| TH14L-S | 14 | 118 | 48 |
| TH17L-S | 17 | 125 | 55 |
Wrench-T
| Ordering Code | Dimension (mm) | ||
| d | L | h | |
| TH03T-L-S | 3 | 110 | 3 |
| TH04T-L-S | 4 | 120 | 4 |
| TH05T-L-S | 5 | 150 | 5 |
| TH06T-L-S | 6 | 170 | 6 |
| TH08T-L-S | 8 | 190 | 8 |
| OrderingCode | Coolant | Dimension (mm) | Weight(kg) | |||||||||
| dia. | D | d1 | d2 | d3 | L1 | L2 | L | 0 | G | |||
| BT40- | 45C-S | 4 | 23 | 15 | 10 | 17 | 35 | 28 | 60 | 45° | M16 | 0.07 |
| 60C-S | 4 | 23 | 15 | 10 | 17 | 35 | 28 | 60 | 60° | M16 | 0.07 | |
| 90C-S | 4 | 23 | 15 | 10 | 17 | 35 | 28 | 60 | 90° | M16 | 0.07 | |
| BT50- | 45C-S | 6 | 38 | 23 | 17 | 25 | 45 | 35 | 85 | 45° | M24 | 0.25 |
| 60C-S | 6 | 38 | 23 | 17 | 25 | 45 | 35 | 85 | 60° | M24 | 0.25 | |
| 90C-S | 6 | 38 | 23 | 17 | 25 | 45 | 35 | 85 | 90° | M24 | 0.25 | |
BT Pull Stud With Cooling Hole
| Ordering Code | Dimension (mm) | Weight(kg) | |||||||||
| D | d1 | d2 | d3 | L1 | L2 | L | G | ||||
| BT30- | 45-S | 16.5 | 11 | 7 | 12.5 | 23 | 18 | 43 | 45° | M12 | 0.03 |
| 60-S | 16.5 | 11 | 7 | 12.5 | 23 | 18 | 43 | 60° | M12 | 0.03 | |
| BT40- | 45-S | 23 | 15 | 10 | 17 | 35 | 28 | 60 | 45° | M16 | 0.07 |
| 60-S | 23 | 15 | 10 | 17 | 35 | 28 | 60 | 60° | M16 | 0.07 | |
| 90-S | 23 | 15 | 10 | 17 | 35 | 28 | 60 | 90° | M16 | 0.07 | |
| BT50- | 45-S | 38 | 23 | 17 | 25 | 45 | 35 | 85 | 45° | M24 | 0.25 |
| 60-S | 38 | 23 | 17 | 25 | 45 | 35 | 85 | 60° | M24 | 0.25 | |
| 90-S | 38 | 23 | 17 | 25 | 45 | 35 | 85 | 90° | M24 | 0.25 | |
MAZAKPull Stud
| Ordering | Weight(kg) | |||||||||
| BD1 | BD2 | BD3 | BD4Dimension (m) LB1 | LB2 | LB3 | CRKS | ||||
| MAZAK40-S | 22 | 18.8 | 12.45 | 17 | 44.1 | 19.1 | 14.02 | 5 | M16 | 0.02 |
| MAZAK50-S | 37 | 28.96 | 20.83 | 25 | 65.2 | 25.2 | 17.58 | 8 | M24 | 0.1 |
| OrderingCode | Dimension (mm) | Weight(kg) | ||||||||
| D | d1 | d2 | d3 | L1 | L2 | L | θ | t | ||
| BT40-45-MT4-S | 23 | 15 | 10 | 17 | 35 | 28 | 110 | 45° | M16 | 0.1 |
| BT50-45-MT5-S | 38 | 23 | 17 | 25 | 45 | 35 | 165 | 45° | M20 | 0.65 |
| Ordering Code | Dimension (mm) | |||
| CND | CNT | LB2 | LB1 | |
| HSK40-CPA-S | 8 | M12X1.0 | 29.5 | 7.5 |
| HSK50-CPA-S | 10 | M16X1.0 | 33 | 9.5 |
| HSK63-CPA-S | 12 | M18X1.0 | 36.6 | 11.5 |
| HSK100-CPA-S | 16 | M24X1.5 | 44.2 | 15.5 |
Heating
| Heating | Inserting | Cooling | Removing |
| Place tool holder in heating | Insert the cutterto the expanded holder | Cool the holderand hold the cutter | Heat the holderand remove the cutter |
Tools
●Theholderwiththin-walledandholediameterbelow8mm isonlysuitablefortheclampingofcementedcarbidetoos.waledand hole diameter below 8mm is only suitable for the clamping of cemented carbide toolsl.
·No shrink release is possible for any toolfor high speed steel.
·Atools exceeding its tolerance can cause breakage or slippage.
Retention Knob(BT)
·Use a retention knob that has perforations,or remove the retention knob and heat it.
·The typical retention knob has no vent to release air,preventing tools from being insertedr.
Coolant Duct(HSK)
·Heating the holder with coolant duct attached,the o-ring willbe damaged.
·Remove the coolant duct before heating the holder.
Precautions For Water-Cooling
·Water-cooling immediatelyaftershrink fiting may result in burnsdueto thelarge quantityofsteam generated.
·Besuretosettheshrink-fiting heaterseting tocoolandcooltheholderforatleastone minute before water-coolingit.
Moistureleftontheholdermayleadtorustformationanddamagetotheholder,sobesuretocompletelyremoveallmoisture.
| Ordering Code | Dimension (mm) | |||||||||||
| D1 | D2 | L1 | L2 | L3 | L4 | L5 | L6 | L7 | b1 | b2 | b3 t | |
| HSK40A | 40 | 30.007 | 20 | 20 | 16 | 4 | 11.42 | 6 | 3.5 | 11 9 | 8.05 | 17 |
| HSK50A | 50 | 38.009 | 25 | 26 | 18 | 5 | 14.13 | 7.5 | 4.5 | 14 12 | 10.54 | 21 |
| HSK63A | 63 | 48.01 | 32 | 26 | 18 | 6.3 | 18.13 | 10 | 6 18 | 16 | 12.5 | 26.5 |
| HSK100A | 100 | 75.013 | 50 | 29 | 20 | 10 | 28.56 | 15 | 10 22 | 20 | 20 | 44 |
BTTool Holder Ordering Code- MAS403BT
| Ordering Code | Dimension (mm) | ||||||||||
| D1 | d1 | L1 | D2 | D3 | L2 | L3 | L4 | L5 | b | t g | |
| BT30 | 31.75 | 12.5 | 48.4 | 46 | 38 | 20 | 13.6 | 2 8 | 16.1 | 16.3 | M12 |
| BT40 | 44.45 | 17 | 65.4 | 63 | 53 | 25 16.6 | 2 | 10 | 16.1 | 22.6 | M16 |
| BT50 | 69.85 | 25 | 101.8 | 100 | 85 | 35 | 23.2 3 | 15 | 25.7 | 35.4 | M24 |
Xiamen Golden Egret Special Alloy Co., Ltd.
Address:No.69,Xnglong Road,Huli,imen
China
FactoryAddress:No.1601-1629,Jicheng Road,
Tong'an Industrial Concentration Zone,
Xiamen,hina
Email:GJ.GLB@CXTC.COM
