MINI68三模磁轴键盘

Tri-Mode Magnetic Switch Keyboard

Pro/MAX版 / Pro/MAX Version

·时尚的外观设计，68键布局，手感细腻软弹

Fashionable exterior design, 68 key layout, delicate and soft touch

·键帽和机械开关可插拨，用户也可以购买市面上各品牌开关和个性化键帽自由DIY。

Keycaps and mechanical switches can be plugged in and unplugged, and various brands of switches and personalized keycaps on the market can be purchased for free DIY.

·键盘用料扎实，按键反应灵敏。

The keyboard is made of solid materials and has sensitive key response.

· 独立收纳接收器。

Independent storage receiver.

·驱动可自定义磁轴行程范围0.1\~3.3/3.4mm，RT调节精度0.01mm。

The driver can customize the magnetic axis travel range of 0.1\~3.3/3.4mm, and the RT adjustment accuracy is 0.01mm.

·键盘人性化设计，与Fn配合增加一系列常用快捷功能按键。

Humanized keyboard design, combined with Fn to add a series of commonly used shortcut function keys.

• Type C连接性更可靠，性能更稳定，充电更快。

Type C connectivity is more reliable, performance is more stable, and charging is faster.

·键盘蓝牙/2.4G/有线均支持全键无冲。

Both keyboard BT/2.4G/wired support full key no collision.

•扫描率：128KHz。

Scanning rate: 128KHz.

· 键盘回报率/ Keyboard polling rate:

MINI 68 Pro：有线模式8000Hz，2.4G模式1000Hz，蓝牙模式125Hz

MINI 68 Pro: Wired mode 8000Hz, 2.4G mode 1000Hz, BT mode 125Hz.

MINI 68 MAX：有线模式8000Hz，2.4G模式8000Hz，蓝牙模式125Hz

MINI 68 MAX: Wired mode 8000Hz, 2.4G mode 8000Hz, BT mode 125Hz.

·开关拨到蓝牙模式BLE5.0,根据终端设备的蓝牙版本随机广播，可以连接3个设备(设备名：MINI 68 HE Pro/MINI68 HE MAX)

Switch to BT mode BLE5.0, randomly broadcast according to the BT version of the terminal device, and can connect to 3 devices. (Equipment Name: MINI 68 HE Pro/MINI68 HE MAX)

切换MINI 60 HE Pro-1(长按对码，短按回连，名称以具体购买型号为准)按键下蓝色指示通道广播时蓝灯快闪，回连慢闪，连上蓝色亮2s。

Switch MINI 68 HE Pro -1 (long press to match code, short press to reconnect, name based on specific purchase model). When the blue indicator channel broadcasts, the blue light flashes rapidly, and when reconnected, it flashes slowly. The blue light stays on for 2s.

切换MINI60 HEPro-2(长按对码，短按回连，名称以具体购买型号为准) 按键下蓝色指示通道广播时蓝灯快闪，回连慢闪，连上蓝色亮2s。

Switch MINI 60 HE Pro -2 (long press to match code, short press to reconnect, name based on specific purchase model). When the blue indicator channel broadcasts, the blue light flashes rapidly, and when reconnected, it flashes slowly. The blue light stays on for 2s.

切换MINI 60 HEPro-3(长按对码，短按回连，名称以具体购买型号为准)按键下蓝色指示通道广播时蓝灯快闪，回连慢闪，连上蓝色亮2s。

Switch MINI 60 HE Pro -3 (long press to match code, short press to reconnect, name based on specific purchase model). When the blue indicator channel broadcasts, the blue light flashes rapidly, and when reconnected, it flashes slowly. The blue light stays on for 2s.

·按住FN后提示当前3模式，蓝牙3通道，3系统对应按键下均亮白灯，松开恢复灯效。

After holding down FN, it will prompt that the current 3 mode, Bluetooth 3 channel, and 3 system corresponding buttons are all lit with white lights. Release to restore the light effect.

有线模式连接方式 / Wired Mode Connection Method

①开关拨到中间有线模式 Switch to the middle wired mode

②将USB线插入键盘的Type-c接口
Insert the USB cable into the Type-C interface of the keyboard

·键盘刷补丁需要切换成有线模式，刷完后重新插拔键盘线和开关键盘上方的开关。

Keyboard patching requires switching to wired mode, and after flashing, re plug and unplug the keyboard cable and switch the switch above the keyboard.

①开关拨到2.4G模式 Switch to 2.4G mode

②R键青色灯慢闪；长按3SFN+R键青色 灯快闪进入对码状态/The key green light flashes slowly; Press and hold the FN+R key for 3s, and the green light will flash rapidly to enter the code pairing state.

③此时插入接收器完成对码，R键青色灯亮 2s，2.4G连接成功。/ At this point, the receiver is inserted to complete the code matching. The blue light on the R key lights up for 2s, indicating a successful 2.4G connection.

注意：2.4G连接时先搜索再插接收器。

Search first and then plug in the receiver when connecting to 2.4G.

出厂默认已对码。

The factory default code has been matched.

背光灯效调节 / Backlight Effect Adjustment

FN+A切换Android模式，切换后对应按键红灯闪烁。

FN+A switches to Android mode, and the corresponding button's red light flashes after switching.

FN+S切换Windows模式，切换后对应按键红灯闪烁。

FN+S switches to Windows mode, and the corresponding button's red

light flashes after switching.

FN+D切换MAC模式，切换后对应按键红灯闪烁。

FN+D switches to MAC mode, and the corresponding button's red light

flashes after switching.

·Fn+左WIN=锁定/打开左WIN窗口键（锁WIN时锁WIN指示灯常亮，在WIN系统下）

Fn+Left WIN=Lock/Open Left WIN Window Key (When WIN is locked, the WIN lock indicator light stays on, under the WIN system)

·切换到Mac/IOS系统后左WIN/左ALT位置互换（不锁WIN）

Switch to Mac/iOS system and swap the position of left WIN/left ALT (without locking WIN)

快捷键说明 / Shortcut Instructions

Long press Fn+Esc for 3s to restore default settings. The previously connected BT device will not be cleared.

Android系统(A键红灯闪3s)，F区单按功能与F区FN组合功能。

Android system (A key red light flashes for 3s), F-zone single press function and F-zone、 FN combination function.

磁轴调节方式 / Magnetic Axis Adjustment Method

·配合驱动，驱动带多种磁轴功能：
In conjunction with the drive, the drive comes with multiple magnetic axis functions:
a.动态键程(DKS)：可以修改当前按键根据按压和松开的程度不同,绑定1至4种功能。 Dynamic Keystroke (DKS): The current button can be modified to bind 1 to 4 functions depending on the degree of pressing and releasing.
b.双效点击(MT)：单个按键实现两种功能；按住按键为一种，单击按键为另一种。 Double click (MT): a single button achieves two functions; Pressing and holding a button is one type, clicking a button is another type.
c.切换开关(TGL)：单击按键可切换开启或关闭持续触发，按住按键则为正常触发行为。 Switching switch (TGL): Click the button to switch on or off continuous triggering, hold down the button for normal triggering behavior.
d.SOCD：SOCD监控所选的两个按键，并根据你选择的设定激活它们。
SOCD: SOCD monitors the two selected buttons and activates them according to the settings you have chosen.

e.迅洁：Rappy Snappy监控所选的两个按键，并激活按下较深的按键。

Xun Jie: Rappy Snappy monitors the two selected keys and activates the deeper pressed key f.快速触发功能(RT)：快速触发将根据您按下或释放按键的意图动态地调整您的触发行程和重置行程 Quick Trigger Function (RT): Quick Trigger will dynamically adjust your trigger stroke and reset stroke based on your intention to press or release the button

g.可视化快速磁轴行程校准，单个按键行程独立调节。

Visual fast magnetic axis travel calibration, with independent adjustment of single button travel.

休眠模式说明 / Sleep Mode Description

·蓝牙/2.4G模式下一分钟无任何操作自动进入休眠模式(网页驱动可自定义休眠时间，默认一分钟)，单击任意按键唤醒键盘。

BT/2.4G mode automatically enters sleep mode without any operation for one minute (web driver can customize sleep time, default is one minute), click any key to wake up the keyboard.

充电使用说明/ Charging Instructions

·低电量FN键背光红灯闪烁，充电时FN键背光红灯亮2s，充满FN键背光绿灯亮2s。 The low battery FN key backlight red light flashes. When charging, the FN key backlight red light stays on for 2s, and when fully charged, the FN key backlight green light stays on for 2s.

·FN+B查看键盘电量（1-0键背光绿灯），也可以连接蓝牙在电脑上查看。 FN+B can be used to check the keyboard battery level (with green backlight for keys 1-0), or BT can be connected to the computer to check.

·键数：68键Number of keys: 68

• FN键多功能 FN key multifunctional

·产品尺寸：318.80(L) ×102.16(W)×37.11(H) ±1mm Product size:318.80 (L) ×102.16 (W) ×37.11(H) ±1mm

·产品重量：约721g(不含线材/接收器）/约775g(含线材/接收器)

Product weight: Approximately 721g (Excluding wire/Receiver) /About 775g (Including wire /Receiver)

· 额定电压:DC 3.7V(充满4.2V) Rated voltage: DC 3.7V (Fully charged 4.2V)

·额定电流：≤150mA@3.7V(默认灯效)/≤100mA(关所有灯光) Rated current: ≤150mA @ 3.7V (Default light effect)/≤100mA (Turn off all lights)

· 充电电压/电流：DC 5V=1500mA Charging voltage/Cur rent: DC 5V==1500mA

·续航时间：约26小时（默认灯效）/约40小时(关所有灯光）

Battery life: Approximately 26h (Default light effect)/Approximately 40h (All lights turned off)

· 电池容量：3000mAh可充电锂电池 Battery capacity: 3000mAh rechargeable lithium battery

· 充电时长：充电约6\~7小时 Charging time: about 6-7h for charging

· 电池容量：4000mAh 可充电锂电池Battery capacity: 4000mAh rechargeable lithium battery

· 键盘接口：USB-C接口 Keyboard interface: USB-C interface

电脑系统需求 / Computer System Requirements

· 电脑系统需求 / Computer system requirements:

有线/2.4G模式：Windows ALL操作系统WIN XP,WIN7,WIN8,WIN10(在Win95，Win98系统下，可能需要驱动程序)。

Wired/2.4G mode: Windows ALL operating system WIN XP, WIN7, WIN8, WIN10 (drivers may be required on Win95, Win98 systems).

·有线模式/2.4G接收器：配置有USB1.1或以上版本端口。

Wired mode/2.4G receiver: equipped with USB 1.1 or above ports.

·蓝牙模式：带有蓝牙BT3.0、BLE4.0、BLE5.0及以上硬件的MAC电脑，Android手机或平板，IOS手机或平板。

BT mode: MAC computers, Android phones or tablets, IOS phones or tablets with BT BT3.0, BLE4.0, BLE5.0 and above hardware.

· 硬件连接 / Hardware connection:

有线USB/2.4G接收器支持热插拔（即插即用）。

The wired USB/2.4G receiver supports hot plugging (plug and play).

标准版 / Standard Version

·时尚的外观设计，68键布局，手感细腻软弹

Fashionable exterior design, 68 key layout, delicate and soft touch

·键帽和机械开关可插拨，用户也可以购买市面上各品牌开关和个性化键帽自由DIY。

Keycaps and mechanical switches can be plugged in and unplugged, and various brands of switches and personalized keycaps on the market can be purchased for free DIY.

·键盘用料扎实，按键反应灵敏。

The keyboard is made of solid materials and has sensitive key response.

·独立收纳接收器。
Independent storage receiver.

·驱动可自定义磁轴行程范围0.1\~3.4mm，RT调节精度0.01mm。

The driver can customize the magnetic axis travel range of 0.1\~3.4mm, and the RT adjustment accuracy is 0.01mm.

·键盘人性化设计，与Fn配合增加一系列常用快捷功能按键。

Humanized keyboard design, combined with Fn to add a series of commonly used shortcut function keys.

• Type C连接性更可靠，性能更稳定，充电更快。

Type C connectivity is more reliable, performance is more stable, and charging is faster.

·键盘蓝牙/2.4G/有线均支持全键无冲。

Both keyboard BT/2.4G/wired support full key no collision.

•扫描率：128KHz。

Scanning rate: 128KHz.

·键盘回报率：有线模式8000Hz，2.4G模式1000Hz，蓝牙模式125Hz

Keyboard polling rate: Wired mode 8000Hz, 2.4G mode 8000Hz, BT mode 125Hz.

·开关拨到蓝牙模式BLE5.0,根据终端设备的蓝牙版本随机广播，可以连接3个设备(设备名：MINI 68 HE)

Switch to BT mode BLE5.0, randomly broadcast according to the BT version of the terminal device, and can connect to 3 devices. (Equipment Name: MINI 68 HE)

切换MINI60HE-1(长按对码，短按回连，名称以具体购买型号为准)按键下1键蓝色指示通道广播时蓝灯快闪，回连慢闪，连上蓝色亮2s。

Switch MINI 60 HE -1 (long press to match code, short press to reconnect, the name depends on the specific purchase model). Press the 1 key below the button, and the blue indicator light will flash rapidly when the channel is broadcasted. When reconnected, the blue light will light up for 2s

切换MINI60HE-2(长按对码，短按回连，名称以具体购买型号为准) 按键下2键蓝色指示通道广播时蓝灯快闪，回连慢闪，连上蓝色亮2s。

Switch MINI 60 HE -1 (long press to match code, short press to reconnect, the name depends on the specific purchase model). Press the 2 key below the button, and the blue indicator light will flash rapidly when the channel is broadcasted. When reconnected, the blue light will light up for 2s.

切换MINI60HE-3(长按对码，短按回连，名称以具体购买型号为准)按键下3键蓝色指示通道广播时蓝灯快闪，回连慢闪，连上蓝色亮2s。

Switch MINI 60 HE -1 (long press to match code, short press to reconnect, the name depends on the specific purchase model). Press the 3 key below the button, and the blue indicator light will flash rapidly when the channel is broadcasted. When reconnected, the blue light will light up for 2s.

·按住FN后提示当前3模式，蓝牙3通道，3系统对应按键下均亮白灯，松开恢复灯效。

After holding down FN, it will prompt that the current 3 mode, BT 3 channel, and 3 system corresponding buttons are all lit with white lights. Release to restore the light effect.

有线模式连接方式 / Wired Mode Connection Method

①开关拨到中间有线模式 Switch to the middle wired mode

②将USB线插入键盘的Type-c接口
Insert the USB cable into the Type-C interface of the keyboard

·键盘刷补丁需要切换成有线模式，刷完后重新插拔键盘线和开关键盘上方的开关。

Keyboard patching requires switching to wired mode, and after flashing, re plug and unplug the keyboard cable and switch the switch above the keyboard.

①开关拨到2.4G模式 Switch to 2.4G mode

②4键青色灯慢闪；长按3SFN+R键青色 灯快闪进入对码状态/The key green light flashes slowly; Press and hold the FN+R key for 3s, and the green light will flash rapidly to enter the code pairing state.

注意：2.4G连接时先搜索再插接收器。

③此时插入接收器完成对码，4键青色灯亮 2s，2.4G连接成功。/ At this point, the receiver is inserted to complete the code matching. The blue light on the R key lights up for 2s, indicating a successful 2.4G connection.

Search first and then plug in the receiver when connecting to 2.4G.

出厂默认已对码。

The factory default code has been matched.

操作系统模式切换 / Operating System Mode Switching

FN+A切换Android模式，切换后对应按键红灯闪烁。

light flashes after switching.

FN+S切换Windows模式，切换后对应按键红灯闪烁。

FN+S switches to Windows mode, and the corresponding button's red

light flashes after switching.

FN+D切换MAC模式，切换后对应按键红灯闪烁。

flashes after switching. hing.

FN+D switches to MAC mode, and the corresponding button's red light

·Fn+左WIN=锁定/打开左WIN窗口键（锁WIN时锁WIN指示灯常亮，在WIN系统下）

Fn+Left WIN=Lock/Open Left WIN Window Key (When WIN is locked, the WIN lock indicator light stays on, under the WIN system)

·切换到Mac/IOS系统后左WIN/左ALT位置互换（不锁WIN)

Switch to Mac/iOS system and swap the position of left WIN/left ALT (without locking WIN)

Android系统(A键红灯闪3s)，F区单按功能与F区FN组合功能。

Android system (A key red light flashes for 3s), F-zone single press function and F-zone、 FN combination function.

·配合驱动，驱动带多种磁轴功能：

In conjunction with the drive, the drive comes with multiple magnetic axis functions:

a.动态键程(DKS)：可以修改当前按键根据按压和松开的程度不同,绑定1至4种功能。 Dynamic Keystroke (DKS): The current button can be modified to bind 1 to 4 functions depending on the degree of pressing and releasing.

b.双效点击(MT)：单个按键实现两种功能；按住按键为一种，单击按键为另一种。 Double click (MT): a single button achieves two functions; Pressing and holding a button is one type, clicking a button is another type.

c.切换开关(TGL)：单击按键可切换开启或关闭持续触发，按住按键则为正常触发行为。 Switching switch (TGL): Click the button to switch on or off continuous triggering, hold down the button for normal triggering behavior.

d.SOCD：SOCD监控所选的两个按键，并根据你选择的设定激活它们。 SOCD: SOCD monitors the two selected buttons and activates them according to the settings you have chosen.

e.迅洁：RappySnappy监控所选的两个按键，并激活按下较深的按键。 Xun Jie: Rappy Snappy monitors the two selected keys and activates the deeper pressed key

f.快速触发功能(RT)：快速触发将根据您按下或释放按键的意图动态地调整您的触发行程和重置行程 Quick Trigger Function (RT): Quick Trigger will dynamically adjust your trigger stroke and reset stroke based on your intention to press or release the button

g.可视化快速磁轴行程校准，单个按键行程独立调节。

Visual fast magnetic axis travel calibration, with independent adjustment of single button travel.

休眠模式说明 / Sleep Mode Description

·蓝牙/2.4G模式下一分钟无任何操作自动进入休眠模式(网页驱动可自定义休眠时间， 默认一分钟)，单击任意按键唤醒键盘。 BT/2.4G mode automatically enters sleep mode without any operation for one minute (web driver can customize sleep time, default is one minute), click any key to wake up the keyboard.

充电使用说明/Charging Instructions

·连接蓝牙在电脑端查看电量。

Connect Bluetooth to check battery level on the computer.

·低电量ESC键背光红灯闪烁，充电时ESC键背光红灯亮2s，充满ESC键背光绿灯亮2So

The low battery ESC key backlight red light flashes. When charging, the ESC key backlight red light stays on for 2 seconds, and when fully charged, the ESC key backlight green light stays on for 2 seconds.

1、建议仅使用电脑USB接口对键盘进行充电；

2、请勿使用快充手机充电器对键盘充电；

3、请勿使用劣质非标电源适配器对键盘进行充电；

4、请勿使用过压过流电源适配器对键盘进行充电；

充电说明

5、充电时请远离高温设备；

6、长时间不使用时请关闭电源开关。

以上充电说明同样适用于其他带充电功能设备(键盘/鼠标/耳机/音箱等)

1. It is recommended to use only the computer USB port to charge the keyboard.

2. Do not use fast-charging cell phone chargers to charge the keyboard.

3. Do not use inferior non-standard power adapter to charge the keyboard.

Charging instructions

4.Do not use over-voltage and over-current power adapter to charge the keyboard.

5.Please keep away from high temperature equipment when charging

6. Please turn off the power switch if it is not used for a long time.

The above charging instructions also apply to other devices with charging function (keyboard/mouse/headphones/speakers, etc.)

产品参数 / Product Parameters

·键数：68键Number of keys: 68

· FN键多功能 FN key multifunctional

· 产品尺寸：318.80(L)×102.16(W) ×37.11(H) ±1mm Product size:318.80(L) ×102.16 (W)×37.11(H) ±1mm

Product weight: Approximately 721g (Excluding wire/Receiver) /About 775g (Including wire /Receiver)

· 额定电压:DC 3.7V(充满4.2V) Rated voltage: DC 3.7V (Fully charged 4.2V)

· 额定电流：≤100mA @3.7V。 Rated current: ≤100mA @3.7V。

· 充电电压/电流：DC 5V⎓1500mA Charging voltage/Cur rent: DC 5V==1500mA

• 电池容量：4000mAh 可充电锂电池Battery capacity: 3000mAh rechargeable lithium battery

· 充电时长：充电约6\~7小时 Charging time: about 6-7h for charging

· 电池容量：4000mAh 可充电锂电池Battery capacity: 4000mAh rechargeable lithium battery

· 键盘接口：USB-C接口 Keyboard interface: USB-C interface · 电脑系统需求 / Computer system requirements:

有线/2.4G模式：Windows ALL操作系统WIN XP,WIN7,WIN8,WIN10 (在Win95，Win98系统下，可能需要驱动程序)。

Wired/2.4G mode: Windows ALL operating system WIN XP, WIN7, WIN8, WIN10 (drivers may be required on Win95, Win98 systems).

·有线模式/2.4G接收器：配置有USB 1.1或以上版本端口。

Wired mode/2.4G receiver: equipped with USB 1.1 or above ports.

·蓝牙模式：带有蓝牙BT3.0、BLE4.0、BLE5.0及以上硬件的MAC电脑，Android手机或平板，IOS手机或平板。

BT mode: MAC computers, Android phones or tablets, IOS phones or tablets with BT BT3.0, BLE4.0, BLE5.0 and above hardware.

· 硬件连接 / Hardware connection:

有线USB/2.4G接收器支持热插拔（即插即用）。

The wired USB/2.4G receiver supports hot plugging (plug and play).

Commissioned :Shenzhen Suoai Electronics Co.,Ltd 委托方：深圳市索艾电子科技有限公司
Commissioned Party (Manufacturer) :Dongguan Suoai Electronics Co.,Ltd 受委托方（制造商)：东莞市索艾电子科技有限公司 Suoai Industry Park,Huayu Street Changlong
Village Huangjiang Town Dongguan City
Guangdong Province.
广东省东莞市黄江镇长龙村华裕街索艾产业园
Enterprise standard code:GB/T14081-2010
执行标准：GB/T14081-2010
www.aulacn.com
Made in China