Self Centering Vises

⾃定⼼虎钳

⾃定⼼⼿动夹持虎钳，可以应对多⽤途。
Self-centering vise can cope with multiple uses.

技术特点 Technical features

1. 啮合⻮，左右夹爪钳⼝上均设有啮合⻮，提⾼胚料夹持稳定性。
2. 正⾯光⾯夹持，⽤于夹持⼯件⾯有要求的产品，避免夹伤出现夹痕或划伤。
3. 螺纹孔，⽤于⼯件定位块固定使⽤。
4. 精密T 型导轨设计，有效保证夹持精度及刚性。
5. 带密封性设计的丝杆定心装置，重复夹持精 ± 0 . 0 2 \mathsf {mm } . 。
6. 分夹位定位口, 用于分夹位使用。
7. 丝杆材质采用马氏体不锈钢调质硬化处理，并采用先进涂层工艺, 提供产品耐磨性、腐蚀性, 丝杆两端设计内外六角扳手位，可使用外六角套筒扳手及内六角扳手
扭动锁紧使用。
8. 底座侧面设有夹持槽, 运用于自动化。
9. 配备有定位拉钉, 用于快换基准板系统中进行定位夹持。
10. 主体两侧斜面排水排屑结构设计，材质马氏体不锈钢调质硬化处理, 并采用先进氮化技术工艺处理, 增加刚性、耐磨、防腐性。
11. M5 螺纹孔，用于安装 RFID 芯片。
12. 反面光面夹持, 夹持已加工过工件面/ 不可压花工件面。
13. 夹爪一体结构高刚性设计, 可正反调换使用, 并延展夹持行程, 材质马氏体不锈钢调质硬化处理，采用先进氮化技术工艺处理，增加产品刚性、耐磨、防腐性。
14. 带预紧力可消除配合间隙, 有效提高虎钳夹持精度稳定性。
1.Mesh teeth, the left and right jaws are equipped with meshing teeth, improve the stability of the blank parts clamping processing.
2.Frontal smooth clamping is used to clamp products with required workpiece surfaces to avoid pinching marks or scratches.
3.Threaded hole, used for fixing workpiece locating blocks.
4.Precise T-rail design effectively ensures clamping accuracy and rigidity.
5.Screw centering device with sealing design, repeatable clamping accuracy ± 0 . 0 2 \mathsf {mm } .
6.The positioning port of the sub-clamp position is used for the use of the sub-clamping position.
7.The lead screw is made of martensitic stainless steel through quenching and tempering hardening treatment., and surface is treated with DLC to improve the
wear resistance and corrosion resistance of the product and ensure the service life of the product.The hexagon wrench positions at both ends can be used with
hexagon socket wrenches and hexagon wrenches to twist a lock.
8.There are clamping slots on the side of the base for automation.
9.Equipped with locating drawbars for positioning clamping in quick-change reference plate systems.
10.The main body of the vise is made of stainless steel martensitic vacuum heat treatment to improve the hardness. wear resistanceand rigidity of the product,
and QPQ treatment is done to improve the corrosion resistance and wear resistance to ensure the service life of the product.The design of the inclined surface
drainage and chip removal structure on both sides of the main body can ensure the stability of the accuracy of th product.
11.M5 threaded hole for mounting RFlD chips.
12.Reverse smooth clamping,clamping the machined workpieceface/non-embossable workpiece face.
13.The one-piece clamp is made of alloy stainless steel to improve the rigidity of the transmission, and the surface is treated with DLC toimprove the wear
resistance and corrosion resistance ofthe product and ensure the service life of the product.
14.The preload device can eliminate the mating gap and effectively improve the stability of the vise's clamping accuracy.

52 型 ⾃定⼼虎钳 Self Centering Vise

●标准库存 ○订单生产

●标准库存 ○订单生产

⾃定⼼虎钳- 硬⽖正反装使⽤ Self Centering Vise-hard jaws for front and reverse side use

⾃定⼼虎钳- 硬⽖分夹位使⽤ Self Centering Vise-hard jaws split clamping position use

虎钳硬⽖座 Hard Jaw Holder

W2 D 商 T L W3

⾃定⼼虎钳——软⽖使⽤介绍Self Centering Vise-Soft Jaw Usage Introduction

⾃定⼼虎钳——软⽖分夹位使⽤Self Centering Vise-Soft Jaw Usage Introduction

ZP-S52P50V1

P50 燕尾夹具 P50 Dovetail Fixture

适⽤于搭配 5 2 \mathsf {mm } 快换应用。
Suitable for use with 5 2 \mathsf {mm } quick change dutam pallets.

ZP-S52P50V2

P50 三位燕尾夹具 P50 Three Stations Dovetail Fixture

适⽤于搭配 5 2 \mathsf {mm } 快换基佳板应⽤。
Suitable for use with 5 2 \mathsf {mm } quick change dutam pallets.

ZP-S96P150V1

P150 三位燕尾夹具 P150 Three Stations Dovetail Fixture1

适⽤于搭配96mm 快换基佳板应⽤。
Suitable for use with 5 2 \mathsf {mm } quick change dutam pallets.

应⽤案例 Application Cases

快换板 ^ + 定⼼钳四轴机应⽤Quick change pallet+Self centering vise 4-Axis machine application

快换板 ^ + 定⼼钳三轴机应⽤Quick change pallet+Self centering vise 3-Axis machine application

快换板 ^ + 定⼼钳五轴机应⽤Quick change pallet+Self centering vise 5-Axis machine application

快换板 ^ + 定⼼钳四轴机应⽤Quick change pallet+Self centering vise 4-Axis machine application

应⽤案例 Application Cases

动快换板 ^ + 定⼼钳三轴机⾃动化应⽤ Pneumatic quick change pallet+Self centering vise for automation of 3-axis machines

快换板 ^ + 定⼼钳三轴机应⽤Quick change pallet+Self centering vise 3-Axis machine application

动快换板 ^ + 定⼼钳四轴机应⽤ Pneumatic quick change pallet+Self centering vise 4-Axis machine application