Page 1 of 7 Report No.：CCJC2022A550402

深圳诚测检测技术有限公司

Shenzhen CCJC Technology Co., Ltd

Tel: (86-755)23707853 Http: //www.ccjctek.com Email: lab@ccjctek.com

Add:1-3/F.,Building 101, No.135-3, Shasong Road, Houting, Shajing Street, Bao’an

District, Shenzhen, Guangdong, China

Material Safety Data Sheet

MSDS Report

Prepared For: Huizhou Huibaotong New Energy Co., Ltd.

Address: Floor 5, West Section of Yuhe Road, Huiyang Economic

Development Zone, Huizhou City (No.2 Workshop)

Product Name: Li-ion Cell

Model : 10300

Nominal Voltage: 3.7V

Rated Capacity: 100mAh，0.37Wh

Weight: Approx. 4.33g

Dimension : Φ10.2mm *30.2mm

Prepared By :

Shenzhen CCJC Technology Co.,Ltd.

1-3/F.,Building 101, No.135-3, Shasong Road, Houting,

Shajing Street, Bao’an District, Shenzhen, Guangdong, China

Report No.: CCJC2022A550402

Effective Date: 2023-01-01

Written by: Approved by:

Inspected by: Issue date: 2022-12-14

Page 2 of 7 Report No.：CCJC2022A550402

深圳诚测检测技术有限公司

Shenzhen CCJC Technology Co., Ltd

Tel: (86-755)23707853 Http: //www.ccjctek.com Email: lab@ccjctek.com

Add:1-3/F.,Building 101, No.135-3, Shasong Road, Houting, Shajing Street, Bao’an

District, Shenzhen, Guangdong, China

Material Safety Data Sheet

Section 1 - Chemical Product and Company Identification

Product Name: Li-ion Cell

Product Model: 10300

Manufacture: Huizhou Huibaotong New Energy Co., Ltd.

Address:

Floor 5, West Section of Yuhe Road, Huiyang Economic Development

Zone, Huizhou City (No.2 Workshop)

Tel: +86-13691702103

Fax: /

Emergency Tel: +86-13691702103

E-mail: 1902949546@qq.com

Section 2 - Hazards Identification

Classification of

Danger See section 14.

Primary Route(s)

of Exposure Eye, skin contact, ingestion.

Health Hazard

The batteries are not hazardous when used according to the instructions of

manufacturer under normal conditions. In case of abuse, there’s risk of

rupture, fire, heat, leakage of internal components, with could cause

casualty loss. Abuses include but not limited to the following cases:

charged for long time, short circuited, put into fire, whacked with hard

object, punctured with acute object, crushed, and broken.

Chemical Composition CAS No. Concentration or

concentration ranges (%)

lithium manganate 12057-17-9 34.3

Aluminum(Al) 7429-90-5 11.3

Section 3 – Composition/Information on Ingredients

Page 3 of 7 Report No.：CCJC2022A550402

深圳诚测检测技术有限公司

Shenzhen CCJC Technology Co., Ltd

Tel: (86-755)23707853 Http: //www.ccjctek.com Email: lab@ccjctek.com

Add:1-3/F.,Building 101, No.135-3, Shasong Road, Houting, Shajing Street, Bao’an

District, Shenzhen, Guangdong, China

Copper (Cu) 7440-50-8 10.5

Carbon Black 1333-86-4 13.7

NAFION(R) DISPERSION SOLUTION

DE1021 CS TYPE 31175-20-9 2.0

Other -- 28.2

Labeling according to EC directives.

No symbol and risk phrase are required.

Note: CAS number is Chemical Abstract Service Registry Number.

N/A=Not apply.

Eye Flush eyes with plenty of water for at least 15 minutes, occasionally

lifting the upper and lower eyelids. Get medical aid.

Skin Remove contaminated clothes and rinse skin with plenty of water or

shower for 15 minutes. Get medical aid.

Inhalation Remove from exposure and move to fresh air immediately. Use

oxygen if available.

Ingestion Give at least 2 glasses of milk or water. Induce vomiting unless

patient is unconscious. Call a physician.

Section 5 - Fire Fighting Measures

Characteristics of Hazard Dusts at sufficient concentrations can form explosive mixtures with air.

Combustion generates toxic fumes.

Hazardous Combustion

Products Carbon dioxide.

Fire-extinguishing Methods

and Extinguishing Media

For small fires, use water spray, dry chemical, carbon dioxide or

chemical foam.

Attention in Fire-extinguishing Wear self-contained breathing apparatus in pressure-demand,

MSHA/NIOSH (approved or equivalent) and full protective gear.

Section 6 - Accidental Release Measures

Personal Precautions,

protective equipment, and

emergency procedures

In case of rupture. Attention! Corrosive material. Avoid contact with

skin, eyes and clothing. Ensure adequate ventilation. Use personal

protective equipment as required. Evacuate personnel to safe

areas. Keep people away from and upwind of spill/leak. Refer to

protective measures listed in Sections 7 and 8.

Section 4 - First Aid Measures

Page 4 of 7 Report No.：CCJC2022A550402

深圳诚测检测技术有限公司

Shenzhen CCJC Technology Co., Ltd

Tel: (86-755)23707853 Http: //www.ccjctek.com Email: lab@ccjctek.com

Add:1-3/F.,Building 101, No.135-3, Shasong Road, Houting, Shajing Street, Bao’an

District, Shenzhen, Guangdong, China

Environmental Precautions Prevent product from contaminating soil and from entering sewers

or waterways.

Methods and materials for

Containment

Stop the leak if safe to do so. Contain the spilled liquid with dry

sand or earth. Clean up spills immediately.

Methods and materials for

cleaning up

Absorb spilled material with an inert absorbent (dry sand or earth).

Scoop contaminated absorbent into an acceptable waste container.

Collect all contaminated absorbent and dispose of according to

directions in Section 13. Scrub the area with detergent and water;

collect all contaminated wash water for proper disposal.

Section 7 - Handling and Storage

Handling

In case of rupture. Handle in accordance with good industrial hygiene and

safety practice. Avoid contact with skin, eyes or clothing. Use personal

protection equipment.

Storage Store in a cool, dry, well-ventilated area away from incompatible

substances. Store locked up. Keep out of the reach of children.

Other Precautions

The battery may explode or cause burns, if disassembled, crushed or

exposed to fire or high temperatures. Do not short or install with incorrect

polarity.

Section 8 - Exposure Controls/Personal Protection

Engineering Controls

Use adequate ventilation to keep airborne concentrations low. If used

under conditions that generate particulates, the ACGIH TLV-TWA of

3mg/m3

respirable fraction (10mg/m3

total) should be observed.

Personal Protective

Equipment

Eye and Face Protection: None required for consumer use. If there is a risk

of contact: Tight sealing safety goggles. Face protection shield. Skin and

Body Protection: None required for consumer use. If there is a risk of

contact: Wear protective gloves and protective clothing. Respiratory

Protection: No protective equipment is needed under normal use

conditions. If exposure limits are exceeded or irritation is experienced,

ventilation and evacuation may be required.

Physical State

Appearance: Cylindrical

Color: Multi-colors

Odour: If leaking, smells of medical ether.

Change in condition

pH Not applicable as supplied.

Section 9 - Physical and Chemical Properties

Page 5 of 7 Report No.：CCJC2022A550402

深圳诚测检测技术有限公司

Shenzhen CCJC Technology Co., Ltd

Tel: (86-755)23707853 Http: //www.ccjctek.com Email: lab@ccjctek.com

Add:1-3/F.,Building 101, No.135-3, Shasong Road, Houting, Shajing Street, Bao’an

District, Shenzhen, Guangdong, China

Flash Point Not applicable unless individual components exposed.

Flammability Not applicable unless individual components exposed.

Relative density: Not applicable unless individual components exposed.

Solubility (water) Not applicable unless individual components exposed.

Solubility (other) Not applicable unless individual components exposed.

Section 10 - Stability and Reactivity

Chemical Stability Stable.

Possibility of Hazardous Reactions No data available.

Conditions to Avoid Flames, sparks, and other sources of ignition,

incompatible materials.

Incompatible materials Oxidizing agents, acid, base.

Hazardous Decomposition Products Carbon monoxide, carbon dioxide, lithium oxide fumes.

Section 11 - Toxicological Information

Irritation In the event of exposure to internal contents, vapour

fumes may be very irritating to the eyes and skin.

Sensitization Not Available.

Reproductive Toxicity Not Available.

Toxicologically Synergistic Materials Not Available.

Section 12 - Ecological Information

General note: Do not allow undiluted product or large quantities of it

to reach ground water, water course or sewage system.

Anticipated behavior of a chemical product

in environment/possible environmental

impact/ ecotoxicity

Not Available.

Section 13 - Disposal Considerations

Waste Treatment Recycle or dispose of in accordance with government, state & local

regulations.

Page 6 of 7 Report No.：CCJC2022A550402

深圳诚测检测技术有限公司

Shenzhen CCJC Technology Co., Ltd

Tel: (86-755)23707853 Http: //www.ccjctek.com Email: lab@ccjctek.com

Add:1-3/F.,Building 101, No.135-3, Shasong Road, Houting, Shajing Street, Bao’an

District, Shenzhen, Guangdong, China

Attention for Waste Treatment

Deserted batteries couldn’t be treated as ordinary

trash. Couldn’t be thrown into fire or placed in high

temperature. Couldn’t be dissected, pierced, crushed

or treated similarly. Best way is recycling.

UN number UN3480 or UN3481

Proper shipping name

Lithium ion batteries (including lithium ion polymer batteries) or

Lithium ion batteries packed with equipment (including lithium ion

polymer batteries) or

Lithium ion batteries contained in equipment (including lithium ion

polymer batteries)

Class or division 9

Marine pollutant (Yes/No) No

Packing group N/A

Special precautions which a user needs to be aware of, or needs to comply with, in connection with

transport or conveyance either within or outside their premises

ICAO / IATA:

Can be shipped by air in accordance with International Civil Aviation

Organization (ICAO), TI or International Air Transport Association

(IATA), DGR Packing Instructions (PI) 965 Section IB, or (PI) 966

Section II, or (PI) 967 Section II appropriate of IATA DGR 64th

(2023 Edition) for transportation.

IMDG CODE: The batteries are not restricted to IMDG Code 2022 Edition (Amdt

41-22) according to special provision 188.

In addition, to be permitted in transport each lithium cell and battery types must have passed the

applicable tests set out in Subsection 38.3 of the UN Manual of Tests and Criteria.

a) Dangerous Goods Regulations

b) Recommendations on the Transport of Dangerous Goods-Model Regulations

c) Recommendations on the Transport of Dangerous Goods-Manual of Tests and Criteria

d) International Air Transport Association (IATA)

e) International Maritime Dangerous Goods (IMDG)

f) Technical Instructions for the Safe Transport of Dangerous Goods

g) Classification and code of dangerous goods (GB 6944-2012)

h) 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)

i) Toxic Substance Control Act (TSCA)

j) Code of Federal Regulations

k) In accordance with all Federal, State and local laws

Section 14 - Transport Information

Section 15 - Regulatory Information

Page 7 of 7 Report No.：CCJC2022A550402

深圳诚测检测技术有限公司

Shenzhen CCJC Technology Co., Ltd

Tel: (86-755)23707853 Http: //www.ccjctek.com Email: lab@ccjctek.com

Add:1-3/F.,Building 101, No.135-3, Shasong Road, Houting, Shajing Street, Bao’an

District, Shenzhen, Guangdong, China

The information above is believed to be accurate and represents the best information currently

available to us. However, we makes no warranty of merchantability or any other warranty, express or

implied, with respect to such information, and we assume no liability resulting from its use. Users

should make their own investigations to determine the suitability of the information for their particular

purposes. Although reasonable precautions have been taken in the preparation of the data contained

herein, it is offered solely for your information, consideration and investigation. This material safety data

sheet provides guidelines for the safe handling and use of this product; it does not and cannot advise

on all possible situations, therefore, your specific use of this product should be evaluated to determine if

additional precautions are required.

The data/information contained herein has been reviewed and approved for general release on the

basis that this document contains no export controlled information.

Sample photo:

--End of report--

Section 16 - Other Information