DGHR-V1

TV Stand

Warning

Serious or fatal crushing injuries may occur if the furniture tips over.The furniture must permanently be fixed to the wall using the provided anti-tippingdeviceto preventit fromtipping over.

Different wall materials requires different types of fixing devices.Please use the appropriate fixing device to ensure the stabilityand load capacity of the furniture.If you are uncertain about which type of fixing device to use,please consultyour local hardware store.

Whenassembling the furniture,please place it on an empty carton, carpet,or rug to prevent scratches or damage.

Assemblyof this furniture requires two people.Ensure thatno parts aremissing ordamaged beforeassembly.

Explosion Diagram

PACKAGECONTENT

Remove the plastic piece before using the remote.

2

Please distinguish the front andback of { 2 1 } \& { 2 3 } panel.

Caution:Ensurethatthe holesareonthesameside.

7

调 C 4x

Please take note of this decoration panel in front of thecabinetbottom.

8 Please take note of the correct connection holes of the 2 panels.

Please take note of the correct connection holes.

10

14

Remove the plastic piece before using the remote.

If your door is too low or too high...

Loosen the height screws,thenmove the doorup or down to make it level.

If the space between your doors is wide

Loosen the side-to-side screws,then screw counter-clockwise to make the gap wider o r clockwise to close any gaps.

If you need to adjust the depth of the doors...

Adjustthe in-and-out screws until the door is aligned with the side of the cabinet.

If you intend to use this product as a TV stand, continue the assembly instructions on Page 19.

If you intend to use this product as a fireplace mantel, continue the assembly instructions on Page 22.

TVSTANDASSEMBLY

23

24

25

26

the provided anti-tipping device to prevent it from tipping over.

Mark the drill positions on the wall with a pencil.
Drill a small hole on the marked positions.
Insert a wall anchor into the drilled hole.
Fix the anti-tipping strap to the wall using the provided screws.

Note:Put the TV behind to the wood trim to prevent falling off.

FINISH!

FIREPLACE MANTEL ASSEMBLY

23

24

Markthe drill positions on the wall with a pencil.
Drill a small hole on the marked positions.
Insert a wall anchor into the drilled hole.
Fix the anti-tipping strap to the wall using the provided screws.

YITAHOME

FURNITURECAREANDMAINTENANCE Medium-DensityFiberboard

Thank you for your purchase.We want your item to lastas long as possible.Toensure the product givesyou years of service,please referto thiscareand maintenance guide.

MAINTENANCE

Tightenallboltsand screwsagain within the first2weeks of assembly.
Check the tightness of all bolts every2 months,tighten them if necessary.

2

CLEANING

Cleanthesurface of the MDF (medium-density fiberboard) with a lightly dampened cloth.
Small amount of mild soap can be used if necessary.
Drythe surface immediatelyafter cleaning.

DO NOTuse bleach oralcohol detergent to clean thesurface ADO NOTapplywood treatment on partsmadewithMDF.

Medium-density fiberboard will swelland distort whensuffer fromwaterdamage.
Make sure todry the furniture immediatelyafter cleaning.