该页无缩略图
CENTRIFUGAL PUMPS
TECHNICAL CATALOGUE
TECHNICAL DATA
Rotation speed: 1450 - 29001/min
Operating range:
from 1 to 470 m³/h with head up to 143 metres
Pumped liquid: clean, free of solids and abrasives, non-viscous, non-
aggressive, non-crystallised and chemically neutral, with properties similar to water
Pumped liquid temperature range: from-10°C to +140°C
Maximum ambient temperature: +40°C
Maximum operating pressure:
16 bar - 1600 kPa (for DN 200 max 10 bar)
Flanging: PN 16 DIN 2533
PN 10 DIN 2532 for DN 200
Installation: normally in the horizontal position
Special executions on requests: pumps for liquids other than water
IE3 ≥ 0,75 kW
Packing (also externally powered)
Other voltages and/or frequencies
APPLICATIONS
Standardised centrifugal single-stage pumps, designed for a wide range of applications, such as:
Hot water circulation for the heating system.
Circulation of cold water for air conditioning and refrigeration systems.
Transfer of liquids in agricultural, horticultural, and industrial environments.
Installation of pumping assemblies.
They can be coupled, using an elastic joint (standard or spacer), to a 2-pole or 4-pole electric motor, and installed on a formed metal sheet base in accordance with UNI EN 23661.
CONSTRUCTION FEATURES OF THE PUMP
Cast iron single stage spiral body complying with DIN-EN 733 (formerly DIN 24255), seal holder cover and cast iron motor support, flanges complying with DIN 2533 (DIN 2532 for DN 200). Cast iron impeller, closed and dynamically balanced, with compensation of the axial thrust through balancing holes, operation on interchangeable wear rings (on request). Stainless steel pump shaft supported by two permanently lubricated oversized ball bearings, housed inside an appropriate chamber in the support.
Standard seal device: standardised mechanical seal according to DIN 24960 in carbon/silicon carbide with EPDM OR rings.
Packing with lubricating hydraulic ring and stuffing box in two easily removable parts available on request.
MATERIALS
| No. | PARTS | MATERIALS |
| 1 | PUMP BODY | CAST IRON 250 UNI ISO 185 |
| 4 | IMPELLER | CAST IRON 200 UNI ISO 185 |
| 7A | PUMP SHAFT | AISI420 STAINLESS STEELUNI 6900/71 |
| 28 | OR RING | VITON |
| 36 | SEAL HOLDING DISC | CAST IRON 250 UNI ISO 185 |
| 16 | MECHANICAL SEAL | CARBON/SILICON CARBIDE |
| 31 | SEAL SPACER | AISI 304 STAINLESS STEEL UNI 6900/71 |
| No. | PARTS | MATERIALS |
| 58 | SEAL BUSHING | AISI420 STAINLESS STEELUNI 6900/71 |
| 141 | HYDRAULIC RING | AISI 304 STAINLESS STEELUNI 6900/71 |
| 142 | STUFFING BOX | RAMIE IMPREGNATED PTFE |
VERSION ON REQUEST WITH PACKING
DENOMINATION INDEX
In the description of the bare shaft pump no mention is made of the coupling or motor data.
In the description of the pumps mounted on a base without a motor, the motor data are not mentioned.
The example given describes an NK 100-200 type pump with a cast iron 198 Ø impeller, with BAQE type mechanics, standard coupling and 4-poles 5,5 kW motor running on 380-415 V 50 Hz.
PUMP MATERIAL CODES
| Component | VERSION | |
| A (01) cast iron | B (03) cast iron with bronzeimpeller | |
| Pump body | GG25 | GG25 |
| SEAL HOLDER DISC | GG25 | GG25 |
| Stuffing box | OT Cu 62 Si1 | OT Cu 62 Si1 |
| Impeller | GG25 | GCuSn5Zn5Pb5UNI 7013/8a-72 |
| Wear rings* | GG20 | GG20 |
| Pump shaft | AISI 420 UNI 6900/71 | |
| Shaft sleeve* | AISI 420 UNI 6900/71 | |
PACKING CODES
| Position | Code | Description of the packing |
| 1 | S | Stuffing box type |
| Position | Code | Cooling |
| 2 | N | Stuffing box not cooled |
| K | Stuffing box cooled | |
| Position | Code | Sealing liquid |
| 3 | E | With internal liquid |
| F | With external liquid | |
| 0 | Without hydraulic ring |
\* On request
\*\* Only for packing or balanced mechanical seal.
\*\* Only for packing or balanced mechanical seal.
DESCRIPTION OF THE MECHANICAL SEAL
| Position | Code | Description of the seal |
| 1 | A | O-ring seal with fixed guide |
| B | Rubber bellows seal | |
| C | O-ring seal with spring guide | |
| D | O-ring seal balanced | |
| M | Rubber bellows seal | |
| X | Metal bellows seal | |
| Position | Code | Materials |
| 2&3 | A | Impregnated carbon/metal |
| B | Impregnated carbon/resin | |
| C | Other carbon types | |
| S | Chromium steel | |
| U | Tungsten carbide | |
| Q | Silicon carbide | |
| V | Aluminium oxide (ceramic) | |
| X | Other ceramic types | |
| Position | Code | Materials |
| 4 | P | Nitrile rubber (NBR) |
| S | Silicon rubber | |
| T | Teflon (PTFE) | |
| E | EPDM | |
| V | Viton | |
| M | PTFE coated O-ring | |
| Position | Code | Materials |
| 5 | V | Reinforced |
PRODUCT CODE DESCRIPTION
| NOMINAL DIAMETEROF THE IMPELLER | Cod. |
| 125 | 1 |
| 160 | 2 |
| 200 | 3 |
| 250 | 4 |
| 315 | 5 |
| 125.1 | K |
| 160.1 | L |
| 200.1 | M |
| PUMP TYPE | Cod. |
| KDN 32 | 1 |
| KDN 40 | 2 |
| KDN 50 | 3 |
| KDN 65 | 4 |
| KDN 80 | 5 |
| KDN 100 | 6 |
| KDN 125 | 7 |
| KDN 150 | 8 |
| Cod. | PUMP/IMPELLERMATERIALS |
| 1 | A (01) = cast iron/cast iron |
| 2 | B (03) = cast iron/bronze |
| 3 | |
| 4 | |
| 5 | A (01) + Wr* |
| 6 | B (03) + Wr* |
| 7 | |
| 8 |
| Cod. | SEAL DEVICE |
| 1 | BAQE |
| 2 | BAQE-RMG12 |
| 5 | BQQV* |
| 7 | BAQV* |
| A | SNE* |
| B | SNO* |
| C | SNF* |
| G | BQQE* |
\* On request
| Cod. | P2 NOMINAL |
| 0 | bare shaft |
| 1 | 0.37 |
| 2 | 0.55 |
| 3 | 0.75 |
| 4 | 1.1 |
| 5 | 1.5 |
| 6 | 2.2 |
| 7 | 3 |
| 8 | 4 |
| 9 | 5.5 |
| A | 7.5 |
| B | 11 |
| C | 15 |
| D | 18.5 |
| E | 22 |
| F | 30 |
| G | 37 |
| H | 45 |
| K | 55 |
| L | 75 |
| M | 90 |
| N | 110 |
| P | 132 |
| IDENTIFICATION | Cod. |
| DAB PUMPS S.p.A. | D |
| Cod. | JOINT |
| 0 | Without joint |
| 1 | With standard elastic coupling |
| 2 | With elastic spacer coupling |
\* Bare shaft pump
| Cod. | |
| DAB PUMPS S.p.A. | 1 |
| Cod. | VOLTAGE | P0-LES |
| 0 | Without motor | |
| 1 | 3 x 220-240/380-415 V 50 Hz(<0,75 kW)3 x 220-277/380-480 V 60 Hz | 2 |
| 2 | 3 x 380-480 V 60 Hz | 2 |
| 3 | 3 x 220-240/380-415 V 50 Hz(<0,75 kW)3 x 220-277/380-480 V 60 Hz | 4 |
| 4 | 3 x 380-480 V 60 Hz | 4 |
| A | 3 x 220-240/380-415 V 50 Hz - IE2 | 2 |
| B | 3 x 380-415 V 50 Hz - IE2 | 2 |
| C | 3 x 220-240/380-415 V 50 Hz - IE2 | 4 |
| D | 3 x 380-415 V 50 Hz - IE2 | 4 |
| U | 3 x 220-240/380-415 V 50 Hz - IE3 | 2 |
| V | 3 x 380-415 V 50 Hz - IE3 | 2 |
| W | 3 x 220-240/380-415 V 50 Hz - IE3 | 4 |
| X | 3 x 380-415 V 50 Hz - IE3 | 4 |
GENERAL DATA
Supplied with closed asynchronous type motor, external ventilation cooling, 2 or 4 poles.
Rotor running on ball bearings, largely oversized to ensure low noise and durability.
Electrical protection: in compliance with the EEC 89/336 ELECTROMAGNETIC COMPATIBILITY DIRECTIVE and subsequent amendments, the EEC 73/23 LOW VOLTAGE DIRECTIVE and subsequent amendments, as well as CEI2-3 standards
INSTRUCTIONS FOR THE IDENTIFICATION OF THE PUMP AND MOTOR REQUIRED.
1. On the general chart supplied, find the family pump that indicatively offers the required flow rate and head characteristics.
2. Look for the most appropriate characteristic on the characteristic curves for each family.
3. On the power chart, identify the power required by the pump in order to operate at the required level.
4. Due to the possibility of variations in the pumped liquid flow rate, which can cause an oscillation of the point of operation, a higher power absorption may occur. When selecting the motor, allow for the following safety margins:
Safety margin according to ISO 5199
| REQUIRED PUMP SHAFT POWER (kW) | POWER OF THE MOTOR TO USE P2 (kW) |
| 322 | 355 |
| 286 | 315 |
| 227 | 250 |
| 181 | 200 |
| 145 | 160 |
| 120 | 132 |
| 100 | 110 |
| 81 | 90 |
| 68 | 75 |
| 49 | 55 |
| 40 | 45 |
| 32.5 | 37 |
| 26 | 30 |
| 19 | 22 |
| 15.9 | 18.5 |
| 12.8 | 15 |
| 9.1 | 11 |
| 6.1 | 7.5 |
| 4.3 | 5.5 |
| 3.2 | 4 |
| 2.3 | 3 |
| 1.7 | 2.2 |
| 1.1 | 1.5 |
| 0.81 | 1.1 |
| 0.55 | 0.75 |
| 0.40 | 0.55 |
| 0.27 | 0.37 |
| 0.18 | 0.25 |
If the pump is to be used with liquids with fairly high specific weight and viscosity values, apply any required corrections to the power of the motor to be installed (check the suitability of the construction materials in contact with the liquid).
5. With the name of the pump and the power of the motor, look through the following technical data to find the name of the most suitable base (complete with motor, spacer coupling, and coupling cover).
6. The pump and base required will be delivered already assembled and aligned, although an alignment check is always required after installation (see INSTRUCTION MANUAL).
Ambient temperature
From -30 °C to +40 °C
Due to the low density, and therefore low cooling effect of the air, operation at an ambient temperature above 40 °C, or at an altitude exceeding 1000 m above sea level, requires a reduction of the rated motor load in accordance with this table.
DIMENSIONS OF BARE SHAFT PUMPS
| MODEL | η MAX1450 min-1 | η MAX2900 min-1 | FLANGEDIMENSIONS | PUMP DIMENSIONS | BASE DIMENSIONS | BOLT HOLES | SHAFT END | X | WEIGHTkg | |||||||||||||
| Qm3/h | Hm | Qm³/h | Hm | DNA | DNM | A | F | H1 | H2 | B | M1 | M2 | N1 | N2 | W | S1 | S2 | D | L | |||
| KDN 32-125.1 | 10.5 | 5.5 | 20.9 | 22 | 50 | 32 | 80 | 360 | 112 | 140 | 50 | 100 | 70 | 190 | 140 | 260 | M12 | M12 | 24 | 50 | 100 | 37 |
| KDN 32-125 | 13.6 | 5.8 | 28 | 22.8 | 50 | 32 | 80 | 360 | 112 | 140 | 50 | 100 | 70 | 190 | 140 | 260 | M12 | M12 | 24 | 50 | 100 | 36 |
| KDN 32-160.1 | 8.7 | 8.3 | 17.5 | 33 | 50 | 32 | 80 | 360 | 132 | 160 | 50 | 100 | 70 | 240 | 190 | 260 | M12 | M12 | 24 | 50 | 100 | 38 |
| KDN 32-160 | 15.9 | 8.6 | 31 | 34 | 50 | 32 | 80 | 360 | 132 | 160 | 50 | 100 | 70 | 240 | 190 | 260 | M12 | M12 | 24 | 50 | 100 | 38 |
| KDN 32-200.1 | 8.5 | 11.4 | 18 | 45 | 50 | 32 | 80 | 360 | 160 | 180 | 50 | 100 | 70 | 240 | 190 | 260 | M12 | M12 | 24 | 50 | 100 | 46 |
| KDN 32-200 | 17.7 | 13.2 | 35.5 | 52.5 | 50 | 32 | 80 | 360 | 160 | 180 | 50 | 100 | 70 | 240 | 190 | 260 | M12 | M12 | 24 | 50 | 100 | 46 |
| KDN 40-125 | 21.8 | 5.6 | 46 | 21.5 | 65 | 40 | 80 | 360 | 112 | 140 | 50 | 100 | 70 | 210 | 160 | 260 | M12 | M12 | 24 | 50 | 100 | 39 |
| KDN 40-160 | 25.8 | 9.2 | 50 | 37.2 | 65 | 40 | 80 | 360 | 132 | 160 | 50 | 100 | 70 | 240 | 190 | 260 | M12 | M12 | 24 | 50 | 100 | 41 |
| KDN 40-200 | 29 | 12.6 | 57 | 51 | 65 | 40 | 100 | 360 | 160 | 180 | 50 | 100 | 70 | 265 | 212 | 260 | M12 | M12 | 24 | 50 | 100 | 49 |
| KDN 40-250 | 31 | 19.1 | 62 | 77 | 65 | 40 | 100 | 360 | 180 | 225 | 65 | 125 | 95 | 320 | 250 | 260 | M12 | M12 | 24 | 50 | 100 | 57 |
| KDN 50-125 | 41 | 5.4 | 83 | 21.5 | 65 | 50 | 100 | 360 | 132 | 160 | 50 | 100 | 70 | 240 | 190 | 260 | M12 | M12 | 24 | 50 | 100 | 42 |
| KDN 50-160 | 43.3 | 9.3 | 87.5 | 37 | 65 | 50 | 100 | 360 | 160 | 180 | 50 | 100 | 70 | 265 | 212 | 260 | M12 | M12 | 24 | 50 | 100 | 44 |
| KDN 50-200 | 41 | 14 | 81 | 56 | 65 | 50 | 100 | 360 | 160 | 200 | 50 | 100 | 70 | 265 | 212 | 260 | M12 | M12 | 24 | 50 | 100 | 51 |
| KDN 50-250 | 49 | 19.1 | 100 | 76 | 65 | 50 | 100 | 360 | 180 | 225 | 65 | 125 | 95 | 320 | 250 | 260 | M12 | M12 | 24 | 50 | 100 | 59 |
| KDN 65-125 | 57 | 5.2 | 114 | 21 | 80 | 65 | 100 | 360 | 160 | 180 | 65 | 125 | 95 | 280 | 212 | 260 | M12 | M12 | 24 | 50 | 100 | 46 |
| KDN 65-160 | 61 | 8.6 | 121 | 34.5 | 80 | 65 | 100 | 360 | 160 | 200 | 65 | 125 | 95 | 280 | 212 | 260 | M12 | M12 | 24 | 50 | 100 | 47 |
| KDN 65-200 | 62 | 14.8 | 123 | 59 | 80 | 65 | 100 | 360 | 180 | 225 | 65 | 125 | 95 | 320 | 250 | 260 | M12 | M12 | 24 | 50 | 140 | 66 |
| KDN 65-250 | 65.4 | 20 | 129 | 81 | 80 | 65 | 100 | 470 | 200 | 250 | 80 | 160 | 120 | 360 | 280 | 340 | M16 | M12 | 32 | 80 | 140 | 93 |
| KDN 65-315 | 84 | 31.5 | - | - | 80 | 65 | 125 | 470 | 225 | 280 | 80 | 160 | 120 | 400 | 315 | 340 | M16 | M12 | 32 | 80 | 140 | 112 |
| KDN 80-160 | 101 | 8.1 | 195 | 33.5 | 100 | 80 | 125 | 360 | 180 | 225 | 65 | 125 | 95 | 320 | 250 | 260 | M12 | M12 | 24 | 50 | 140 | 55 |
| KDN 80-200 | 101 | 14.4 | 200 | 57.5 | 100 | 80 | 125 | 470 | 180 | 250 | 65 | 125 | 95 | 345 | 280 | 340 | M12 | M12 | 32 | 80 | 140 | 84 |
| KDN 80-250 | 103 | 23 | 215 | 88 | 100 | 80 | 125 | 470 | 200 | 280 | 80 | 160 | 120 | 400 | 315 | 340 | M16 | M12 | 32 | 80 | 140 | 104 |
| KDN 80-315 | 136 | 35 | - | - | 100 | 80 | 125 | 470 | 250 | 315 | 80 | 160 | 120 | 400 | 315 | 340 | M16 | M12 | 32 | 80 | 140 | 122 |
| KDN 100-200 | 163 | 13.4 | 315 | 53 | 125 | 100 | 125 | 470 | 200 | 280 | 80 | 160 | 120 | 360 | 280 | 340 | M16 | M12 | 32 | 80 | 140 | 96 |
| KDN 100-250 | 159 | 21.8 | 313 | 87 | 125 | 100 | 140 | 470 | 225 | 280 | 80 | 160 | 120 | 400 | 315 | 340 | M16 | M12 | 32 | 80 | 140 | 111 |
| KDN 100-315 | 187 | 34.1 | - | - | 125 | 100 | 140 | 470 | 250 | 315 | 80 | 160 | 120 | 400 | 315 | 340 | M16 | M12 | 32 | 80 | 140 | 126 |
| KDN 125-250 | 289 | 20.5 | - | - | 150 | 125 | 140 | 470 | 250 | 355 | 80 | 160 | 120 | 400 | 315 | 340 | M16 | M12 | 32 | 80 | 140 | 135 |
| KDN 150-200 | 378 | 10 | - | 一 | 200 | 150 | 160 | 470 | 280 | 400 | 100 | 200 | 150 | 550 | 450 | 340 | M20 | M12 | 32 | 80 | 140 | 178 |
FLANGE DIMENSIONS (mm)
 NO. OF HOLES | Nominal diameter (DN) | |||||||||
| DIN 2533 PN 16 | DIN 2533 PN 10 | |||||||||
| 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | ||
| D( | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| D) | 100 | 110 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | |
| D[ | 140 | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | |
| S | 18 | 18 | 18 | 18 | 18 | 18 | 18 | 22 | 22 | |
| NO. OF HOLES | 4 | 4 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | |
PERFORMANCE RANGE
The performance curves are based on kinematic viscosity values = 1 mm²/s and density equal to 1000 kg/m³. Curve tolerance according to ISO 9906.
GRAPHIC SELECTION TABLE
= 2900 1/min
SELECTION TABLE - KDN 32
| MODEL | Q=m³/h | 0 | 6 | 12 | 18 | 24 | 30 | 36 | 42 | 48 |
| Q=I/min | 0 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | |
| KDN 32-125.1/105 | 工三 | 13,8 | 13,6 | 12,3 | 9,7 | |||||
| KDN 32-125.1/110 | 15,5 | 15,2 | 13,9 | 11,5 | ||||||
| KDN 32-125.1/115 | 17,1 | 16,8 | 15,5 | 13,2 | ||||||
| KDN 32-125.1/120 | 18,8 | 18,5 | 17,3 | 15,1 | ||||||
| KDN 32-125.1/125 | 20,5 | 20,3 | 19,1 | 17 | ||||||
| KDN 32-125.1/130 | 22,3 | 22,2 | 21,3 | 19 | ||||||
| KDN 32-125.1/135 | 24,4 | 24.1 | 23,3 | 21,1 | 17,8 | |||||
| KDN 32-125.1/140 | 26,5 | 26,4 | 25,6 | 23,4 | 20,1 | |||||
| KDN 32-125/115 | 17,3 | 16,5 | 15,1 | 12,9 | ||||||
| KDN 32-125/120 | 19 | 18,2 | 17 | 14,9 | 11,1 | |||||
| KDN 32-125/125 | 20,9 | 20,1 | 18,9 | 16,9 | 13,5 | |||||
| KDN 32-125/130 | 22,9 | 22 | 21 | 19,1 | 16,2 | |||||
| KDN 32-125/135 | 24,9 | 24 | 22,1 | 21,5 | 18,5 | 14,7 | ||||
| KDN 32-125/142 | 27,8 | 27 | 26,1 | 24,5 | 21,7 | 18 | ||||
| KDN 32-160.1/137 | 21,5 | 21,2 | 19,3 | |||||||
| KDN 32-160.1/145 | 24,7 | 24,5 | 22,3 | 16,5 | ||||||
| KDN 32-160.1/153 | 28,3 | 28 | 26 | 20,5 | ||||||
| KDN 32-160.1/161 | 32 | 31,.8 | 30 | 25 | ||||||
| KDN 32-160.1/169 | 36 | 35,7 | 34,4 | 29,5 | ||||||
| KDN 32-160.1/177 | 39,5 | 39,3 | 38,2 | 34,5 | 26 | |||||
| KDN 32-160/137 | 23,7 | 22,6 | 20,7 | 17,6 | ||||||
| KDN 32-160/145 | 27 | 25,8 | 23,9 | 21,2 | 16,9 | |||||
| KDN 32-160/153 | 30,4 | 29,5 | 27.7 | 25,8 | 21,2 | |||||
| KDN 32-160/161 | 34 | 33 | 31,7 | 29,1 | 25,5 | |||||
| KDN 32-160/169 | 38 | 37,3 | 36 | 33,6 | 35,7 | 26,5 | ||||
| KDN 32-160/177 | 41,8 | 41,5 | 40,5 | 38,4 | 35,3 | 31,4 | ||||
| KDN 32-200.1/170 | 34,3 | 34,2 | 31,9 | 23,5 | ||||||
| KDN 32-200.1/180 | 39,4 | 39,2 | 36,7 | 30 | ||||||
| KDN 32-200.1/190 | 45,3 | 44,7 | 41,5 | 35,5 | ||||||
| KDN 32-200.1½200 | 51,5 | 51 | 47,3 | 41 | 35 | |||||
| KDN 32-200.1/207 | 55,3 | 55 | 51,8 | 46,4 | 37 | |||||
| KDN 32-200/170 | 34 | 33 | 31 | 27 | 21 | |||||
| KDN 32-200/180 | 39 | 38,5 | 36,5 | 32,5 | 28 | |||||
| KDN 32-200/190 | 45 | 43,5 | 42 | 39 | 34 | 28,5 | ||||
| KDN 32-200/200 | 51 | 49 | 48 | 45 | 40,5 | 35 | ||||
| KDN 32-200/210 | 57 | 56 | 55 | 52,5 | 48,5 | 43 | 36 | |||
| KDN 32-200/219 | 63 | 62 | 61 | 59 | 56,5 | 52,5 | 46,5 | 39,5 |
SELECTION TABLE - KDN 40
| MODEL | Q=m³/h | 0 | 6 | 12 | 18 | 24 | 30 | 36 | 42 | 48 | 54 | 60 | 66 | 72 |
| Q=I/min | 0 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | |
| KDN 40-125/115 | 工三 | 16,8 | 13,3 | 15,6 | 15 | 14,3 | 13,2 | 12,6 | 9,8 | |||||
| KDN 40-125/120 | 18,5 | 18 | 17,5 | 17 | 16 | 15 | 13,5 | 11,8 | ||||||
| KDN 40-125/125 | 20,4 | 20 | 19,5 | 19 | 18 | 16,7 | 15,3 | 13,5 | ||||||
| KDN 40-125/130 | 22 | 21,8 | 21,5 | 21 | 20 | 19 | 17,5 | 15,7 | 14 | |||||
| KDN 40-125/135 | 24,1 | 24 | 23,9 | 23,4 | 22,5 | 21,5 | 20 | 18,3 | 16,4 | |||||
| KDN 40-125/142 | 26,8 | 26,6 | 26,4 | 26 | 25,3 | 24,4 | 23 | 21,4 | 19,4 | 17 | ||||
| KDN 40-160/137 | 23,9 | 23,8 | 23 | 22 | 20,5 | 18 | 15 | |||||||
| KDN 40-160/145 | 27,5 | 27,4 | 27 | 25,7 | 24,2 | 22,1 | 19,5 | |||||||
| KDN 40-160/153 | 31,1 | 31 | 30,5 | 29,5 | 28 | 26,5 | 24 | 21 | ||||||
| KDN 40-160/161 | 34,5 | 34,5 | 34,4 | 33,7 | 32,3 | 30,5 | 28,5 | 25,8 | 22,5 | |||||
| KDN 40-160/169 | 38,4 | 38,4 | 38,2 | 38 | 37 | 35 | 33,5 | 31 | 28 | |||||
| KDN 40-160/177 | 42,6 | 42,5 | 42,4 | 42 | 41,5 | 40 | 38,5 | 35 | 33 | 30 | ||||
| KDN 40-200/170 | 33,6 | 33 | 32,6 | 32 | 30 | 26,5 | 22,5 | |||||||
| KDN 40-200/180 | 38,8 | 38,5 | 38 | 37 | 35 | 32,5 | 29 | 25 | ||||||
| KDN 40-200/190 | 43,4 | 43,1 | 43 | 42,7 | 41 | 38 | 35 | 31,5 | 27 | |||||
| KDN 40-200/200 | 48,7 | 48,4 | 48,2 | 47,5 | 46,5 | 44 | 41,5 | 38,5 | 34,5 | |||||
| KDN 40-200/210 | 54,3 | 54,1 | 54 | 53,6 | 53 | 51 | 48,5 | 46 | 42,5 | 38 | ||||
| KDN 40-200/219 | 60 | 59,8 | 59,7 | 59,4 | 59 | 57 | 55 | 52,5 | 49,5 | 46 | 40 | |||
| KDN 40-250/220 | 63,1 | 62,8 | 62,5 | 61 | 59 | 57 | 55 | 52 | 48 | |||||
| KDN 40-250/230 | 69,5 | 69,3 | 68,5 | 67,8 | 66 | 63,5 | 61 | 58 | 55 | 51 | ||||
| KDN 40-250/240 | 76,3 | 76 | 75,8 | 75 | 73 | 70,5 | 68 | 65 | 62 | 58,5 | ||||
| KDN 40-250/250 | 82,8 | 82,5 | 82 | 81,8 | 80 | 78 | 75,5 | 72,5 | 69 | 66 | ||||
| KDN 40-250/260 | 91 | 90,5 | 90 | 89,5 | 88,5 | 86,5 | 84 | 81 | 78 | 74 |
SELECTION TABLE - KDN 50
| MODEL | Q=m³/h | 0 | 6 | 12 | 18 | 24 | 30 | 36 | 42 | 48 | 54 | 60 | 66 | 72 | 78 | 84 | 90 | 102 | 114 | |
| Q=I/min | 0 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1700 | 1900 | ||
| KDN 50-125/115 | 工三 | 17,1 | 15,9 | 15,5 | 15 | 14,3 | 13,6 | 13 | 12,2 | 11,5 | 10,4 | 9 | ||||||||
| KDN 50-125/120 | 18,2 | 17,5 | 17 | 16,5 | 16 | 15,3 | 14,7 | 14 | 13,2 | 12 | 11,2 | 10 | ||||||||
| KDN 50-125/125 | 19,8 | 19,4 | 19 | 18,5 | 17,9 | 17,4 | 16,6 | 16 | 15,1 | 14 | 13 | 11,8 | ||||||||
| KDN 50-125/130 | 21,5 | 21,1 | 20,8 | 20,5 | 19,8 | 19,2 | 18,5 | 17,8 | 17 | 16,5 | 15,2 | 14 | ||||||||
| KDN 50-125/135 | 23,2 | 23 | 22,6 | 22,3 | 21,8 | 21,2 | 20,6 | 19,9 | 19,3 | 18,4 | 17,5 | 16,3 | 13,7 | |||||||
| KDN 50-125/139 | 24,7 | 24,5 | 24,3 | 24 | 23,5 | 23 | 22,4 | 21,6 | 20,8 | 20 | 19,2 | 18 | 15,5 | |||||||
| KDN 50-125/144 | 25,9 | 26,5 | 26,4 | 26,1 | 25,6 | 25,1 | 24,5 | 24 | 23,2 | 22,3 | 21,5 | 20,5 | 17,8 | 15 | ||||||
| KDN 50-160/137 | 24,2 | 23,8 | 23,7 | 23,5 | 22,5 | 22 | 21 | 20,3 | 19 | 18 | 16,8 | 15 | ||||||||
| KDN 50-160/145 | 27,2 | 27 | 26,9 | 26,6 | 26,4 | 25,5 | 25 | 23,8 | 23 | 21,5 | 20,5 | 19 | ||||||||
| KDN 50-160/153 | 30,3 | 30,3 | 30,2 | 30 | 29,9 | 29,5 | 28,5 | 27,7 | 26,5 | 25,5 | 24,5 | 23 | ||||||||
| KDN 50-160/161 | 33,8 | 33,7 | 33,7 | 33,6 | 33,6 | 33,3 | 32,5 | 31,8 | 31 | 29,8 | 28,5 | 27,5 | ||||||||
| KDN 50-160/169 | 37,7 | 37,7 | 37,5 | 37,5 | 37,4 | 37 | 36,2 | 35,7 | 35,5 | 34,2 | 33 | 31,5 | 29 | |||||||
| KDN 50-160/177 | 41,6 | 41,5 | 41,5 | 41,3 | 41,2 | 41 | 40,6 | 40,5 | 39,5 | 38,8 | 38 | 36,7 | 33,5 | |||||||
| KDN 50-200/170 | 37,9 | 37 | 36,8 | 36,4 | 35 | 34 | 32 | 30 | 27 | 25 | ||||||||||
| KDN 50-200/180 | 42,5 | 42 | 41,7 | 41,4 | 40,5 | 39,5 | 38 | 36 | 34 | 32 | 29 | |||||||||
| KDN 50-200/190 | 47,2 | 46,8 | 46,6 | 46 | 45,7 | 44,5 | 43,5 | 42 | 40 | 38 | 35,5 | 33 | ||||||||
| KDN 50-200/200 | 52,4 | 52,2 | 52 | 18 | 51,5 | 50,5 | 49 | 47,5 | 46 | 44,5 | 42 | 40 | ||||||||
| KDN 50-200/210 | 58,4 | 58,4 | 58,2 | 58 | 57,5 | 56,5 | 55,5 | 54 | 52,5 | 51 | 49 | 46,5 | 41,5 | |||||||
| KDN 50-200/219 | 64 | 64 | 64 | 64 | 63,5 | 62,5 | 61,5 | 60 | 58,5 | 57 | 55 | 53 | 48,5 | |||||||
| KDN 50-250/220 | 63,7 | 63,3 | 63,1 | 63 | 62 | 61 | 59 | 57,5 | 55 | 53 | 50 | 46,5 | 36 | |||||||
| KDN 50-250/230 | 69,6 | 69,3 | 69 | 68,8 | 68,5 | 68 | 66 | 64 | 62 | 60 | 57 | 54 | 45 | |||||||
| KDN 50-250/240 | 76 | 75,8 | 75,5 | 75,3 | 75 | 74,5 | 73 | 71,5 | 69 | 67 | 65 | 62 | 55 | |||||||
| KDN 50-250/250 | 83,2 | 83 | 82,9 | 82,8 | 83,5 | 82 | 80,5 | 78,5 | 77 | 75 | 72,5 | 70 | 64 | |||||||
| KDN 50-250/263 | 92,1 | 92 | 91,8 | 91,6 | 91,5 | 91,3 | 89,9 | 88,5 | 86,5 | 84,5 | 82,5 | 80 | 75 | 61 | 」 |
SELECTION TABLE - KDN 65
| MODEL | Q=m³/h | 0 | 48 | 54 | 60 | 66 | 72 | 78 | 84 | 90 | 102 | 114 | 120 | 150 | 180 | 210 | 240 |
| Q=I/min | 0 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1700 | 1900 | 2000 | 2500 | 3000 | 3500 | 4000 | |
| KDN 65-125/120/110 | 工三 | 16 | 14.4 | 14 | 13,6 | 13,1 | 12,8 | 12,2 | 11,9 | 11,4 | 10,2 | 8,7 | 8 | ||||
| KDN 65-125/120 | 17,8 | 16 | 15,8 | 15,3 | 17,9 | 14.4 | 13,9 | 13,4 | 13 | 11,5 | 10,3 | 9,4 | |||||
| KDN 65-125/125 | 19.4 | 17.8 | 17,5 | 17,1 | 16,8 | 16.4 | 16 | 15,4 | 15 | 13,5 | 12,2 | 11,4 | |||||
| KDN 65-125/130 | 21 | 19,6 | 19,5 | 19,1 | 18,9 | 18,5 | 18 | 17,5 | 17 | 15,7 | 14,2 | 13,2 | |||||
| KDN 65-125/135 | 22,6 | 21,8 | 21,5 | 21,3 | 21 | 20,5 | 20,1 | 19,6 | 19,2 | 18 | 16,5 | 15,6 | |||||
| KDN 65-125/140 | 24 | 23,6 | 23,6 | 23,4 | 23 | 22,8 | 22,3 | 22 | 21,4 | 20,3 | 18,9 | 18 | 13,8 | ||||
| KDN 65-125/144 | 25,6 | 25,5 | 25,4 | 25,2 | 25 | 24,6 | 24,3 | 24 | 23,4 | 22,5 | 21,1 | 20,2 | 16 | ||||
| KDN 65-160/137 | 23,1 | 22,4 | 22 | 21,7 | 21,3 | 20,5 | 19,7 | 19 | 18 | 16 | |||||||
| KDN 65-160/145 | 26,2 | 25,7 | 25,5 | 25 | 24,6 | 24 | 23,5 | 22,7 | 22 | 20 | 17,8 | 16,5 | |||||
| KDN 65-160/153 | 29,1 | 28,8 | 28,5 | 28,6 | 28,5 | 28 | 27,5 | 26,6 | 26 | 24 | 22 | 21 | |||||
| KDN 65-160/161 | 32,6 | 32,5 | 32,4 | 32,3 | 32 | 31,7 | 31,3 | 30,5 | 30 | 28,5 | 26,5 | 25,5 | |||||
| KDN 65-160/169 | 36,4 | 36,3 | 36,2 | 36,1 | 36 | 35,7 | 35,3 | 34,7 | 34 | 32,7 | 31 | 30 | |||||
| KDN 65-160/177 | 40,1 | 39,9 | 39,8 | 39,7 | 40 | 39,8 | 39,5 | 39 | 38,5 | 37,2 | 35,5 | 34,7 | 28,5 | ||||
| KDN 65-200/170 | 37,2 | 36,8 | 36,7 | 36,6 | 36,5 | 36 | 35 | 34 | 32,5 | 30 | 27 | 25 | |||||
| KDN 65-200/180 | 41,7 | 41,4 | 41,3 | 41,2 | 41,1 | 41 | 40,5 | 40 | 39 | 36,5 | 34 | 32 | |||||
| KDN 65-200/190 | 48,3 | 48,2 | 48,1 | 48 | 47,9 | 47,5 | 47 | 41 | 45 | 43 | 40,5 | 39 | |||||
| KDN 65-200/200 | 53,2 | 53,1 | 52,9 | 52,8 | 52,7 | 52,5 | 52,3 | 52 | 51,8 | 50 | 48 | 46,5 | |||||
| KDN 65-200/210 | 59,2 | 59,1 | 59 | 58,9 | 58,8 | 58,7 | 58,5 | 58,2 | 58 | 56,5 | 54,5 | 53,5 | |||||
| KDN 65-200/219 | 64,9 | 64,9 | 64,8 | 64,5 | 64,3 | 64,1 | 64 | 63,8 | 62,5 | 62,4 | 61 | 60 | 52,5 | ||||
| KDN 65-250/220 | 63,2 | 62,8 | 62,5 | 62 | 61 | 60 | 59,5 | 58 | 57 | 54 | 50,5 | 48 | |||||
| KDN 65-250/230 | 69,5 | 69,5 | 69 | 68,5 | 68 | 67 | 66 | 65 | 64 | 63 | 58,5 | 56,5 | |||||
| KDN 65-250/240 | 76 | 75,7 | 75,5 | 75 | 75 | 74 | 73 | 72 | 71 | 69 | 66 | 64 | |||||
| KDN 65-250/250 | 83 | 82,3 | 82,3 | 82,2 | 82 | 81,5 | 81 | 80 | 79 | 76,5 | 73,5 | 72 | 60 | ||||
| KDN 65-250/263 | 92,6 | 91,8 | 91,8 | 91,7 | 91,5 | 91,5 | 91 | 90 | 89,5 | 87,5 | 85 | 83 | 72,5 | ||||
| KDN 65-315/260 | 92,8 | 92,7 | 91,9 | 90,9 | 89,7 | 88,5 | 85,5 | 81,9 | 79,9 | 67,8 | |||||||
| KDN 65-315/275 | 105 | 104,5 | 103,9 | 103,1 | 102,1 | 101,1 | 98,5 | 95,5 | 93,8 | 83,3 | 69,5 | ||||||
| KDN 65-315/290 | 117,1 | 117 | 116,5 | 115,9 | 115,1 | 114,3 | 112,2 | 109,7 | 108,3 | 99,4 | 87,6 | ||||||
| KDN 65-315/305 | 130 | 129,5 | 129,2 | 128,7 | 128 | 127,3 | 125,5 | 123,2 | 121,9 | 113,8 | 103 | 89,6 | |||||
| KDN 65-315/320 | 143 | 142,9 | 142,6 | 142,1 | 171,6 | 140,9 | 139,3 | 137,3 | 136,2 | 128,9 | 119,1 | 106,8 | 92 |
SELECTION TABLE - KDN 80
| MODEL | Q=m³/h | 0 | 90 | 102 | 114 | 120 | 150 | 180 | 210 | 240 | 270 | 300 |
| Q=l/min | 0 | 1500 | 1700 | 1900 | 2000 | 2500 | 3000 | 3500 | 4000 | 4500 | 5000 | |
| KDN 80-160/147/127 | 工三 | 23 | 21,5 | 20,7 | 20 | 19,5 | 17 | 14,5 | 11,8 | 8,8 | ||
| KDN 80-160/153/136 | 25,6 | 24,5 | 23,8 | 23 | 22,5 | 20,2 | 17,5 | 15 | 11,8 | |||
| KDN 80-160/153 | 29,3 | 28 | 27,3 | 26,5 | 26 | 23,5 | 20,7 | 16,5 | 14,5 | |||
| KDN 80-160/161 | 32,8 | 32 | 31,5 | 30,5 | 30 | 27,8 | 25 | 21,5 | 18,5 | |||
| KDN 80-160/169 | 36,5 | 35,7 | 35,2 | 34,5 | 34,2 | 32 | 29,5 | 26,5 | 22,6 | 18,5 | ||
| KDN 80-160/177 | 40 | 39,5 | 39,2 | 38,7 | 38,5 | 37 | 34,8 | 31,8 | 27,8 | 23 | ||
| KDN 80-200/170 | 36,6 | 35,7 | 35,5 | 34,5 | 34 | 31 | 27 | 21,5 | ||||
| KDN 80-200/180 | 41 | 40,6 | 40,5 | 40 | 39,5 | 37 | 33 | 27,5 | ||||
| KDN 80-200/190 | 45,7 | 45,4 | 45 | 44,5 | 44 | 42 | 29 | 34 | ||||
| KDN 80-200/200 | 50,8 | 50,4 | 50,2 | 50 | 49,6 | 49 | 46,5 | 41 | 35 | |||
| KDN 80-200/210 | 56,3 | 55,9 | 55,8 | 55,7 | 55,6 | 54,8 | 52 | 48 | 43 | |||
| KDN 80-200/222 | 63,6 | 63,4 | 63,3 | 63,2 | 63,1 | 63 | 60 | 56,5 | 51,5 | 45 | ||
| KDN 80-250/220 | 62,6 | 62,5 | 62,4 | 62 | 61,8 | 60 | 55,5 | 49 | ||||
| KDN 80-250/230 | 68,3 | 68,2 | 68,1 | 67,9 | 67,9 | 67 | 63 | 57 | 50 | |||
| KDN 80-250/240 | 75,5 | 75,4 | 75,3 | 75,2 | 75 | 74,5 | 71 | 66,5 | 58,5 | |||
| KDN 80-250/250 | 82,5 | 82,3 | 82 | 81,9 | 81,7 | 82 | 78,5 | 74 | 67,5 | 60,5 | ||
| KDN 80-250/260 | 90 | 89,7 | 89,6 | 86,5 | 89,3 | 89 | 86,5 | 82 | 77 | 70 | 61,5 | |
| KDN 80-250/270 | 97,9 | 97,8 | 97,5 | 91,3 | 97 | 96,3 | 94 | 89 | 84 | 77 | 69 | |
| KDN 80-315/275 | 106 | 106,1 | 105,3 | 104,3 | 103,7 | 99,4 | 93,4 | 85,6 | 76 | |||
| KDN 80-315/290 | 118 | 118,4 | 117,8 | 117,1 | 116,6 | 113,2 | 108,2 | 101,5 | 93,2 | 83,4 |
SELECTION TABLE - KDN 100
| MODEL | Q=m³/h | 0 | 150 | 180 | 210 | 240 | 270 | 300 | 330 | 360 | 390 | 420 |
| Q=l/min | 0 | 2500 | 3000 | 3500 | 4000 | 4500 | 4500 | 5500 | 6000 | 6500 | 7000 | |
| KDN 100-200/180 | 工三 | 40,4 | 40 | 38 | 36 | 33 | 30,5 | 28 | 25 | |||
| KDN 100-200/190 | 46,5 | 45 | 44 | 42 | 39 | 37 | 34,5 | 31 | 28 | |||
| KDN 100-200/200 | 51,5 | 51 | 50 | 48,5 | 46 | 44 | 42 | 39 | 35 | 31,5 | ||
| KDN 100-200/210 | 57,5 | 57 | 56 | 55 | 53 | 51 | 49 | 46 | 43 | 39 | 36 | |
| KDN 100-200/219 | 64 | 62,5 | 62 | 61 | 60 | 58 | 56 | 53 | 50 | 47 | 43 | |
| KDN 100-250/220 | 61,1 | 60 | 59,5 | 57 | 54 | 50,5 | 46,5 | 42 | ||||
| KDN 100-250/230 | 67,4 | 66,9 | 66,5 | 64 | 61 | 58 | 54 | 49 | 44 | |||
| KDN 100-250/240 | 73,5 | 72,9 | 71 | 70,5 | 69 | 66 | 63 | 58,5 | 53 | |||
| KDN 100-250/250 | 79,7 | 79,5 | 79 | 78,8 | 77 | 74 | 71 | 67 | 62,5 | |||
| KDN 100-250/260 | 88,6 | 88,2 | 88,1 | 88 | 86 | 83 | 79,5 | 76 | 71,5 | 66 |
KDN 32-125.1 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-125.1 | 0,75 | MEC 80 | 3 x 230-400 V~ | 2,9/1,7 | IE3 |
| 1,1 | MEC 80 | 3 x 230-400 V~ | 4,2/2,4 | E3 | |
| 1,5 | MEC 90S | 3 x 230-400 V~ | 5,2/3 | E3 | |
| 2,2 | MEC 90L | 3x230-400V~ | 8/4,6 | E3 | |
| 3 | MEC 100L | 3×400V~1 | 5,6 | E3 | |
| 4 | MEC 112M | 3x400V~1 | 7 | E3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-125.1 | 0,75 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 717 | 79 | 817 | 84 |
| 1,1 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 717 | 79 | 817 | 84 | |
| 1,5 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 762 | 87 | 862 | 92 | |
| 2,2 | 80 | 60 | 140 | 65 | 177 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 762 | 92 | 862 | 97 | |
| 3 | 80 | 60 | 140 | 65 | 177 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 811 | 91 | 911 | 96 | |
| 4 | 80 | 60 | 140 | 65 | 177 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 833 | 84 | 933 | 89 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 32-125 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-125 | 1,1 | MEC 80 | 3x230-400V~ | 4,2/2,4 | IE3 |
| 1,5 | MEC 90S | 3x230-400V~ | 5,2/3 | IE3 | |
| 2,2 | MEC 90L | 3x230-400V~ | 8/4,6 | IE3 | |
| 3 | MEC 100L | 3×400V~1 | 5,6 | IE3 | |
| 4 | MEC 112M | 3x400V~1 | 7 | E3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-125 | 1,1 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 717 | 78 | 817 | 83 |
| 1,5 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 762 | 80 | 862 | 85 | |
| 2,2 | 80 | 60 | 140 | 65 | 177 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 762 | 85 | 862 | 90 | |
| 3 | 80 | 60 | 140 | 65 | 177 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 811 | 85 | 911 | 90 | |
| 4 | 80 | 60 | 140 | 65 | 177 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 833 | 99 | 933 | 104 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 32-160.1 - 2 P0LES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-160.1 | 1,1 | MEC 80 | 3 x230-400V~ | 4,2/2,4 | IE3 |
| 1,5 | MEC 90S | 3x230-400V~ | 5,2/3 | IE3 | |
| 2,2 | MEC 90L | 3 x230-400 V~ | 8/4,6 | IE3 | |
| 3 | MEC 100L | 3x400V~1 | 5,6 | IE3 | |
| 4 | MEC 112M | 3x400V~1 | 7 | IE3 | |
| 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACEROUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-160.1 | 1,1 | 80 | 60 | 160 | 65 | 197 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 717 | 81 | 817 | 86 |
| 1,5 | 80 | 60 | 160 | 65 | 197 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 762 | 88 | 862 | 93 | |
| 2,2 | 80 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 762 | 94 | 862 | 99 | |
| 3 | 80 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 811 | 91 | 911 | 96 | |
| 4 | 80 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 833 | 86 | 933 | 91 | |
| 5,5 | 80 | 60 | 160 | 80 | 212 | 1000 | 660 | 450 | 400 | 24 | 50 | 32 | 890 | 117 | 990 | 122 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 32-160 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-160 | 2,2 | MEC 90L | 3x230-400V~ | 8/4,6 | IE3 |
| 3 | MEC 100L | 3x400V~1 | 5,6 | IE3 | |
| 4 | MEC 112M | 3x400V~1 | 7 | IE3 | |
| 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 | |
| 7,5 | MEC 132S | 3x400V~1 | 13,1 | E3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-160 | 2,2 | 80 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 762 | 84 | 862 | 92 |
| 3 | 80 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 811 | 91 | 911 | 96 | |
| 4 | 80 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 833 | 86 | 933 | 91 | |
| 5,5 | 80 | 60 | 160 | 80 | 212 | 1000 | 660 | 450 | 400 | 24 | 50 | 32 | 890 | 117 | 990 | 122 | |
| 7,5 | 80 | 60 | 160 | 80 | 212 | 1000 | 660 | 450 | 400 | 24 | 50 | 32 | 910 | 140 | 1010 | 118 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 32-200.1 - 2 P0LES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
=29001/min
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-200.1 | 2,2 | MEC 90L | 3x230-400V~ | 8/4,6 | IE3 |
| 3 | MEC 100L | 3x400V~1 | 5,6 | IE3 | |
| 4 | MEC 112M | 3x400V~1 | 7 | IE3 | |
| 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 | |
| 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-200.1 | 2,2 | 80 | 60 | 180 | 65 | 225 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 762 | 98 | 862 | 103 |
| 3 | 80 | 60 | 180 | 65 | 225 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 811 | 129 | 911 | 134 | |
| 4 | 80 | 60 | 180 | 65 | 225 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 833 | 125 | 933 | 130 | |
| 5,5 | 80 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 50 | 32 | 890 | 124 | 990 | 129 | |
| 7,5 | 80 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 50 | 32 | 910 | 925 | 1010 | 145 | |
| 140 | 1010 | 145 | |||||||||||||||
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 32-200 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-200 | 3 | MEC 100L | 3x400V~1 | 5,6 | IE3 |
| 4 | MEC 112M | 3x400V~1 | 7 | IE3 | |
| 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 | |
| 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 | |
| 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 | |
| 15 | MEC 160M | 3x400V~1 | 26,7 | E3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-200 | 3 | 80 | 60 | 180 | 65 | 225 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 811 | 92 | 911 | 97 |
| 4 | 80 | 60 | 180 | 65 | 225 | 900 | 600 | 390 | 350 | 19 | 50 | 32 | 833 | 86 | 933 | 91 | |
| 5,5 | 80 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 50 | 32 | 890 | 124 | 990 | 129 | |
| 7,5 | 80 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 50 | 32 | 910 | 151 | 1010 | 156 | |
| 11 | 80 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 50 | 32 | 1053 | 214 | 1153 | 219 | |
| 15 | 80 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 50 | 32 | 1053 | 221 | 1153 | 226 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 40-125 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
=29001/min
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 40-125 | 1,5 | MEC 90S | 3 x230-400 V~ | 5,2/3 | IE3 |
| 2,2 | MEC 90L | 3x230-400V~ | 8/4,6 | IE3 | |
| 3 | MEC 100L | 3x400V~1 | 5,6 | IE3 | |
| 4 | MEC 112M | 3x400V~1 | 7 | IE3 | |
| 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 | |
| 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 40-125 | 1,5 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 65 | 40 | 762 | 80 | 862 | 85 |
| 2,2 | 80 | 60 | 140 | 65 | 177 | 900 | 600 | 390 | 350 | 19 | 65 | 40 | 762 | 83 | 862 | 88 | |
| 3 | 80 | 60 | 140 | 65 | 177 | 900 | 600 | 390 | 350 | 19 | 65 | 40 | 811 | 80 | 911 | 85 | |
| 4 | 80 | 60 | 140 | 65 | 177 | 900 | 600 | 390 | 350 | 19 | 65 | 40 | 833 | 84 | 933 | 89 | |
| 5,5 | 80 | 60 | 140 | 80 | 212 | 1000 | 660 | 450 | 400 | 24 | 65 | 40 | 890 | 115 | 990 | 120 | |
| 7,5 | 80 | 60 | 140 | 80 | 212 | 1000 | 600 | 450 | 400 | 24 | 65 | 40 | 910 | 925 | 1010 | 116 | |
| 111 | 1010 | 116 | |||||||||||||||
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 40-160 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 40-160 | 3 | MEC 100L | 3x400V~1 | 5,6 | IE3 |
| 4 | MEC 112M | 3x400V~1 | 7 | IE3 | |
| 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 | |
| 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 | |
| 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 | |
| 15 | MEC 160M | 3x400V~1 | 26,7 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 40-160 | 3 | 80 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 65 | 40 | 811 | 91 | 911 | 96 |
| 4 | 80 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 65 | 40 | 833 | 86 | 933 | 91 | |
| 5,5 | 80 | 60 | 160 | 80 | 212 | 1000 | 660 | 450 | 400 | 24 | 65 | 40 | 890 | 141 | 990 | 146 | |
| 7,5 | 80 | 60 | 160 | 80 | 212 | 1000 | 660 | 450 | 400 | 24 | 65 | 40 | 910 | 139 | 1010 | 144 | |
| 11 | 80 | 60 | 160 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 40 | 1053 | 150 | 1153 | 155 | |
| 15 | 80 | 60 | 160 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 40 | 1053 | 146 | 1153 | 151 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 40-200 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
=29001/min
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 40-200 | 4 | MEC 112M | 3×400V~1 | 7 | IE3 |
| 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 | |
| 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 | |
| 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 | |
| 15 | MEC 160M | 3×400V~1 | 26,7 | IE3 | |
| 18,5 | MEC 160L | 3x400V~1 | 33 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 40-200 | 4 | 100 | 60 | 180 | 65 | 225 | 900 | 600 | 390 | 350 | 19 | 65 | 40 | 853 | 117 | 953 | 122 |
| 5,5 | 100 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 65 | 40 | 910 | 127 | 1010 | 132 | |
| 7,5 | 100 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 65 | 40 | 930 | 121 | 1030 | 126 | |
| 11 | 100 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 40 | 1073 | 198 | 1173 | 203 | |
| 15 | 100 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 40 | 1073 | 204 | 1173 | 209 | |
| 18,5 | 100 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 40 | 1117 | 199 | 1217 | 204 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 40-250 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 40-250 | 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 |
| 15 | MEC 160M | 3x400V~1 | 26,7 | IE3 | |
| 18,5 | MEC 160L | 3x400V~1 | 33 | IE3 | |
| 22 | MEC 180M | 3x400V~1 | 38,1 | IE3 | |
| 30 | MEC 200L | 3x400V~1 | 52,1 | IE3 | |
1 Star start-up possible (A)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 40-250 | 11 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 65 | 40 | 1073 | 213 | 1173 | 218 |
| 15 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 65 | 40 | 1073 | 251 | 1173 | 256 | |
| 18,5 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 65 | 40 | 1117 | 266 | 1217 | 271 | |
| 22 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 65 | 40 | 1152 | 278 | 1252 | 283 | |
| 30 | 100 | 75 | 225 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 65 | 40 | 1234 | 332 | 1334 | 337 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 50-125 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 50-125 | 3 | MEC 100L | 3x400V~1 | 5,6 | IE3 |
| 4 | MEC 112M | 3x400V~1 | 7 | E3 | |
| 5,5 | MEC 132S | 3x400V~1 | 10 | E3 | |
| 7.5 | MEC 132S | 3x400V~1 | 13,1 | E3 | |
| 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 50-125 | 3 | 100 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 65 | 50 | 831 | 94 | 931 | 99 |
| 4 | 100 | 60 | 160 | 65 | 197 | 900 | 600 | 390 | 350 | 19 | 65 | 50 | 853 | 91 | 953 | 96 | |
| 5,5 | 100 | 60 | 160 | 80 | 212 | 1000 | 660 | 450 | 400 | 24 | 65 | 50 | 910 | 143 | 1010 | 148 | |
| 7,5 | 100 | 60 | 160 | 80 | 212 | 1000 | 660 | 450 | 400 | 24 | 65 | 50 | 930 | 117 | 1030 | 122 | |
| 11 | 100 | 60 | 160 | 80 | 240 | 1120 | 740 | 490 | 400 | 24 | 65 | 50 | 1073 | 120 | 1173 | 125 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 50-160 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 50-160 | 4 | MEC 112M | 3x400V~1 | 7 | IE3 |
| 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 | |
| 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 | |
| 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 | |
| 15 | MEC 160M | 3×400V~1 | 26,7 | IE3 | |
| 18,5 | MEC 160L | 3x400V~1 | 33 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 50-160 | 4 | 100 | 60 | 180 | 65 | 225 | 900 | 600 | 390 | 350 | 19 | 65 | 50 | 853 | 114 | 953 | 119 |
| 5,5 | 100 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 65 | 50 | 910 | 124 | 1010 | 129 | |
| 7,5 | 100 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 65 | 50 | 930 | 151 | 1030 | 156 | |
| 11 | 100 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 50 | 1073 | 165 | 1173 | 170 | |
| 15 | 100 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 50 | 1073 | 173 | 1173 | 178 | |
| 18,5 | 100 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 50 | 1117 | 170 | 1217 | 175 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 50-200 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 50-200 | 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 |
| 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 | |
| 15 | MEC 160M | 3x400V~1 | 26,7 | IE3 | |
| 18,5 | MEC 160L | 3x400V~1 | 33 | IE3 | |
| 22 | MEC 180M | 3×400V~1 | 38,1 | IE3 | |
| 30 | MEC 200L | 3x400V~1 | 52,1 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 50-200 | 7,5 | 100 | 60 | 200 | 80 | 240 | 1000 | 600 | 450 | 400 | 24 | 65 | 50 | 930 | 150 | 1030 | 155 |
| 11 | 100 | 60 | 200 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 50 | 1073 | 163 | 1173 | 168 | |
| 15 | 100 | 60 | 200 | 80 | 240 | 1120 | 740 | 490 | 400 | 24 | 65 | 50 | 1073 | 253 | 1173 | 258 | |
| 18,5 | 100 | 60 | 200 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 65 | 50 | 1117 | 251 | 1217 | 256 | |
| 22 | 100 | 60 | 200 | 80 | 260 | 1120 | 740 | 490 | 440 | 24 | 65 | 50 | 1152 | 248 | 1252 | 253 | |
| 30 | 100 | 60 | 200 | 80 | 280 | 1250 | 840 | 540 | 490 | 24 | 65 | 50 | 1234 | 302 | 1334 | 307 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 50-250 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 50-250 | 15 | MEC 160M | 3x400V~1 | 26,7 | IE3 |
| 18,5 | MEC 160L | 3x400V~1 | 33 | IE3 | |
| 22 | MEC 180M | 3×400V~1 | 38,1 | IE3 | |
| 30 | MEC 200L | 3x400V~1 | 52,1 | IE3 | |
| 37 | MEC 200L | 3×400V~1 | 62,6 | IE3 | |
| 45 | MEC 225M | 3×400V~1 | 78,4 | E3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 50-250 | 15 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 65 | 50 | 1073 | 233 | 1173 | 238 |
| 18,5 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 65 | 50 | 1117 | 257 | 1217 | 262 | |
| 22 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 65 | 50 | 1152 | 277 | 1252 | 282 | |
| 30 | 100 | 75 | 225 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 65 | 50 | 1234 | 419 | 1334 | 424 | |
| 37 | 100 | 75 | 225 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 65 | 50 | 1234 | 358 | 1334 | 363 | |
| 45 | 100 | 75 | 225 | 100 | 325 | 1400 | 940 | 610 | 550 | 28 | 65 | 50 | 1270 | 413 | 1370 | 418 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 65-125 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 65-125 | 4 | MEC 112M | 3x400V~1 | 7 | IE3 |
| 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 | |
| 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 | |
| 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 | |
| 15 | MEC 160M | 3x400V~1 | 26,7 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 65-125 | 4 | 100 | 60 | 180 | 65 | 225 | 900 | 600 | 390 | 350 | 19 | 80 | 65 | 853 | 114 | 953 | 119 |
| 5,5 | 100 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 80 | 65 | 910 | 124 | 1010 | 129 | |
| 7,5 | 100 | 60 | 180 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 80 | 65 | 930 | 120 | 1030 | 125 | |
| 11 | 100 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 80 | 65 | 1073 | 152 | 1173 | 157 | |
| 15 | 100 | 60 | 180 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 80 | 65 | 1073 | 153 | 1173 | 158 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 65-160 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 65-160 | 5,5 | MEC 132S | 3x400V~1 | 10 | IE3 |
| 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 | |
| 11 | MEC 160M | 3x400V~1 | 19,7 | E3 | |
| 15 | MEC 160M | 3x400V~1 | 26,7 | IE3 | |
| 18,5 | MEC 160L | 3x400V~1 | 33 | IE3 | |
| 22 | MEC 180M | 3x400V~1 | 38,1 | E3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 65-160 | 5,5 | 100 | 60 | 200 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 80 | 65 | 910 | 130 | 1010 | 135 |
| 7,5 | 100 | 60 | 200 | 80 | 240 | 1000 | 660 | 450 | 400 | 24 | 80 | 65 | 930 | 147 | 1030 | 152 | |
| 11 | 100 | 60 | 200 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 80 | 65 | 1073 | 160 | 1173 | 165 | |
| 15 | 100 | 60 | 200 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 80 | 65 | 1073 | 193 | 1173 | 198 | |
| 18,5 | 100 | 60 | 200 | 80 | 240 | 1120 | 740 | 490 | 440 | 24 | 80 | 65 | 1117 | 188 | 1217 | 193 | |
| 22 | 100 | 60 | 200 | 80 | 260 | 1120 | 740 | 490 | 440 | 24 | 80 | 65 | 1152 | 178 | 1252 | 183 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 65-200 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 65-200 | 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 |
| 15 | MEC 160M | 3x400V~1 | 26,7 | IE3 | |
| 18,5 | MEC 160L | 3x400V~1 | 33 | IE3 | |
| 22 | MEC 180M | 3x400V~1 | 38,1 | E3 | |
| 30 | MEC 200L | 3x400V~1 | 52,1 | IE3 | |
| 37 | MEC 200L | 3×400V~1 | 62,6 | E3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 65-200 | 11 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 80 | 65 | 1073 | 244 | 1213 | 249 |
| 15 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 80 | 65 | 1073 | 252 | 1213 | 257 | |
| 18,5 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 80 | 65 | 1117 | 257 | 1257 | 262 | |
| 22 | 100 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 80 | 65 | 1152 | 290 | 1292 | 295 | |
| 30 | 100 | 75 | 225 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 80 | 65 | 1234 | 418 | 1374 | 423 | |
| 37 | 100 | 75 | 225 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 80 | 65 | 1234 | 431 | 1374 | 436 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 65-250 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 65-250 | 22 | MEC 180M | 3x400V~1 | 38,1 | IE3 |
| 30 | MEC 200L | 3x400V~1 | 52,1 | IE3 | |
| 37 | MEC 200L | 3x400V~1 | 62,6 | IE3 | |
| 45 | MEC 225M | 3x400V~1 | 78,4 | E3 | |
| 55 | MEC 250M | 3x400V~1 | 94,6 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 65-250 | 22 | 100 | 90 | 250 | 80 | 280 | 1250 | 840 | 540 | 490 | 24 | 80 | 65 | 1262 | 277 | 1402 | 285 |
| 30 | 100 | 90 | 250 | 80 | 300 | 1400 | 940 | 610 | 550 | 28 | 80 | 65 | 1344 | 472 | 1484 | 480 | |
| 37 | 100 | 90 | 250 | 80 | 300 | 1400 | 940 | 610 | 550 | 28 | 80 | 65 | 1344 | 502 | 1484 | 510 | |
| 45 | 100 | 90 | 250 | 80 | 325 | 1400 | 940 | 610 | 550 | 28 | 80 | 65 | 1380 | 589 | 1520 | 597 | |
| 55 | 100 | 90 | 250 | 80 | 350 | 1600 | 1060 | 660 | 600 | 24 | 80 | 65 | 1493 | 717 | 1633 | 725 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 65-315 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 65-315 | 45 | MEC 225M | 3x400V~1 | 78,4 | IE3 |
| 55 | MEC 250M | 3x400V~1 | 94,6 | IE3 | |
| 75 | MEC 280S | 3x400V~1 | 127 | IE3 | |
| 90 | MEC 280M | 3x400V~1 | 153 | IE3 | |
| 110 | MEC 315S | 3x400V~1 | 185 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 65-315 | 45 | 125 | 90 | 280 | 100 | 325 | 1600 | 1060 | 660 | 600 | 28 | 80 | 65 | 1405 | 734 | 1545 | 742 |
| 55 | 125 | 90 | 280 | 100 | 325 | 1600 | 1060 | 660 | 600 | 28 | 80 | 65 | 1518 | 740 | 1658 | 748 | |
| 75 | 125 | 90 | 280 | 100 | 325 | 1800 | 1200 | 730 | 670 | 28 | 80 | 65 | 1584 | 849 | 1724 | 857 | |
| 90 | 125 | 90 | 280 | 100 | 325 | 1800 | 1200 | 730 | 670 | 28 | 80 | 65 | 1632 | 651 | 1772 | 659 | |
| 110 | 125 | 90 | 280 | 100 | 325 | 2000 | 1340 | 910 | 830 | 28 | 80 | 65 | 1955 | 1219 | 2095 | 1227 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 80-160 - 2 P0LES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 80-160 | 7,5 | MEC 132S | 3x400V~1 | 13,1 | IE3 |
| 11 | MEC 160M | 3x400V~1 | 19,7 | IE3 | |
| 15 | MEC 160M | 3x400V~1 | 26,7 | IE3 | |
| 18,5 | MEC 160L | 3x400V~1 | 33 | IE3 | |
| 22 | MEC 180M | 3x400V~1 | 38,1 | IE3 | |
| 30 | MEC 200L | 3x400V~1 | 52,1 | IE3 | |
| 37 | MEC 200L | 3x400V~1 | 62,6 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 80-160 | 7,5 | 125 | 75 | 225 | 80 | 260 | 1120 | 740 | 490 | 440 | 24 | 100 | 80 | 955 | 163 | 1095 | 171 |
| 11 | 125 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 100 | 80 | 1098 | 275 | 1238 | 283 | |
| 15 | 125 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 100 | 80 | 1098 | 271 | 1238 | 279 | |
| 18,5 | 125 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 100 | 80 | 1142 | 266 | 1282 | 274 | |
| 22 | 125 | 75 | 225 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 100 | 80 | 1177 | 211 | 1317 | 219 | |
| 30 | 125 | 75 | 225 | 80 | 260 | 1400 | 940 | 610 | 550 | 28 | 100 | 80 | 1259 | 316 | 1399 | 324 | |
| 37 | 125 | 75 | 225 | 80 | 260 | 1400 | 940 | 610 | 550 | 28 | 100 | 80 | 1259 | 408 | 1399 | 416 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 80-200 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
=29001/min
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 80-200 | 18,5 | MEC 160L | 3x400V~1 | 33 | IE3 |
| 22 | MEC 180M | 3×400V~1 | 38,1 | IE3 | |
| 30 | MEC 200L | 3x400V~1 | 52,1 | IE3 | |
| 37 | MEC 200L | 3x400V~1 | 62,6 | IE3 | |
| 45 | MEC 225M | 3×400V~1 | 78,4 | IE3 | |
| 55 | MEC 250M | 3x400V~1 | 94,6 | IE3 | |
| 75 | MEC 280S | 3x400V~1 | 127 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 80-200 | 18,5 | 125 | 75 | 250 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 100 | 80 | 1252 | 207 | 1392 | 215 |
| 22 | 125 | 75 | 250 | 80 | 260 | 1250 | 840 | 540 | 490 | 24 | 100 | 80 | 1287 | 233 | 1427 | 241 | |
| 30 | 125 | 75 | 250 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 100 | 80 | 1369 | 444 | 1509 | 452 | |
| 37 | 125 | 75 | 250 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 100 | 80 | 1369 | 480 | 1509 | 488 | |
| 45 | 125 | 75 | 250 | 100 | 325 | 1400 | 940 | 610 | 550 | 28 | 100 | 80 | 1405 | 587 | 1545 | 595 | |
| 55 | 125 | 75 | 250 | 100 | 350 | 1600 | 1060 | 660 | 600 | 28 | 100 | 80 | 1518 | 539 | 1658 | 547 | |
| 75 | 125 | 75 | 250 | 100 | 380 | 1800 | 1200 | 730 | 670 | 28 | 100 | 80 | 1584 | 609 | 1724 | 617 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 80-250 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 80-250 | 37 | MEC 200L | 3x400V~1 | 62,6 | E3 |
| 45 | MEC 225M | 3x400V~1 | 78,4 | E3 | |
| 55 | MEC 250M | 3x400V~1 | 94,6 | E3 | |
| 75 | MEC 280S | 3x400V~1 | 127 | E3 | |
| 90 | MEC 280M | 3x400V~1 | 153 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 80-250 | 37 | 125 | 90 | 280 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 100 | 80 | 1369 | 496 | 1509 | 504 |
| 45 | 125 | 90 | 280 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 100 | 80 | 1405 | 584 | 1545 | 592 | |
| 55 | 125 | 90 | 280 | 100 | 300 | 1600 | 1060 | 660 | 600 | 28 | 100 | 80 | 1518 | 695 | 1658 | 703 | |
| 75 | 125 | 90 | 280 | 100 | 300 | 1800 | 1200 | 730 | 670 | 28 | 100 | 80 | 1584 | 641 | 1724 | 649 | |
| 90 | 125 | 90 | 280 | 100 | 300 | 1800 | 1200 | 730 | 670 | 28 | 100 | 80 | 1632 | 891 | 1772 | 899 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 80-315 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 80-315 | 55 | MEC 250M | 3×400V~1 | 94,6 | IE3 |
| 75 | MEC 280S | 3x400V~1 | 127 | IE3 | |
| 90 | MEC 280M | 3×400V~1 | 153 | IE3 | |
| 110 | MEC 315S | 3x400V~1 | 185 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 80-315 | 55 | 125 | 90 | 315 | 100 | 350 | 1600 | 1060 | 660 | 600 | 28 | 100 | 80 | 1518 | 720 | 1658 | 728 |
| 75 | 125 | 90 | 315 | 100 | 350 | 1800 | 1200 | 730 | 670 | 28 | 100 | 80 | 1584 | 840 | 1724 | 848 | |
| 90 | 125 | 90 | 315 | 100 | 350 | 1800 | 1200 | 730 | 670 | 28 | 100 | 80 | 1632 | 663 | 1772 | 671 | |
| 110 | 125 | 90 | 315 | 120 | 370 | 2000 | 1340 | 910 | 830 | 28 | 100 | 80 | 1955 | 1231 | 2095 | 1239 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 100-200 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 100-200 | 30 | MEC 200L | 3x400V~1 | 52,1 | IE3 |
| 37 | MEC 200L | 3x400V~1 | 62,6 | IE3 | |
| 45 | MEC 225M | 3x400V~1 | 78,4 | IE3 | |
| 55 | MEC 250M | 3x400V~1 | 94,6 | IE3 | |
| 75 | MEC 280S | 3x400V~1 | 127 | IE3 | |
| 90 | MEC 280M | 3x400V~1 | 153 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 100-200 | 30 | 125 | 90 | 280 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 125 | 100 | 1369 | 466 | 1509 | 474 |
| 37 | 125 | 90 | 280 | 100 | 300 | 1400 | 940 | 610 | 550 | 28 | 125 | 100 | 1369 | 427 | 1509 | 435 | |
| 45 | 125 | 90 | 280 | 100 | 325 | 1400 | 940 | 610 | 550 | 28 | 125 | 100 | 1405 | 588 | 1545 | 596 | |
| 55 | 125 | 90 | 280 | 100 | 350 | 1600 | 1060 | 660 | 600 | 28 | 125 | 100 | 1518 | 668 | 1658 | 676 | |
| 75 | 125 | 90 | 280 | 100 | 380 | 1800 | 1200 | 730 | 670 | 28 | 125 | 100 | 1584 | 621 | 1724 | 629 | |
| 90 | 125 | 90 | 280 | 100 | 380 | 1800 | 1200 | 730 | 670 | 28 | 125 | 100 | 1632 | 603 | 1772 | 611 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 100-250 - 2 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTORSIZE | ELECTRICAL DATA | MOTORTYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 100-250 | 45 | MEC 225M | 3x400V~1 | 78,4 | E3 |
| 55 | MEC 250M | 3x400V~1 | 94,6 | E3 | |
| 75 | MEC 280S | 3x400V~1 | 127 | E3 | |
| 90 | MEC 280M | 3x400V~1 | 153 | E3 | |
| 110 | MEC 315S | 3×400V~1 | 185 | IE3 | |
1 Star start-up possible (λ)
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 100-250 | 45 | 125 | 90 | 280 | 100 | 325 | 1600 | 1060 | 660 | 600 | 28 | 125 | 100 | 1405 | 735 | 1545 | 743 |
| 55 | 125 | 90 | 280 | 100 | 325 | 1600 | 1060 | 600 | 600 | 28 | 125 | 100 | 1518 | 741 | 1658 | 749 | |
| 75 | 125 | 90 | 280 | 100 | 380 | 1800 | 1200 | 730 | 670 | 28 | 125 | 100 | 1584 | 850 | 1724 | 858 | |
| 90 | 125 | 90 | 280 | 100 | 380 | 1800 | 1200 | 730 | 670 | 28 | 125 | 100 | 1632 | 652 | 1772 | 660 | |
| 110 | 125 | 90 | 280 | 100 | 435 | 2000 | 1340 | 910 | 830 | 28 | 125 | 100 | 1955 | 1220 | 2095 | 1128 | |
| 1228 | |||||||||||||||||
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN - 2 POLES
IE3 STANDARD MOTOR ELECTRIC DATA
=2900 1/min
=2900 1/min
| MOTORTYPE | P2NOMINALkW | SPEEDrpm | YIELD% | POWERFACTORCOSφ | POWER INPUT50 Hz | InA | Start-upcurrentla/ln | Start-uptorqueMa/Mn | MaximumtorqueM/k/Mn | POLES | ||
| 230V | 400V | 690V | ||||||||||
| MEC 71 | 0,25 | 2790 | 69,81 | 0,778 | 3x230/400 | 1,16 | 0,67 | 5,06 | 2,90 | 3,01 | 2 | |
| MEC 71 | 0,37 | 2820 | 72,79 | 0,783 | 3x230/400 | 1,61 | 0,93 | 5,40 | 2,69 | 2,99 | 2 | |
| MEC 80 | 0,55 | 2810 | 76,97 | 0,800 | 3x230/400 | 2,23 | 1,29 | 6,41 | 3,43 | 3,13 | 2 | |
| MEC 80 | 0,75 | 2910 | 82,00 | 0,780 | 3x230/400 | 2,94 | 1,70 | 8,90 | 4,70 | 4,80 | 2 | |
| MEC 80 | 1,1 | 2870 | 82,70 | 0,760 | 3x230/400 | 4,16 | 2,40 | 9,30 | 5,00 | 5,30 | 2 | |
| MEC 90S | 1,5 | 2875 | 84,20 | 0,850 | 3x230/400 | 5,20 | 3,00 | 8,40 | 3,60 | 3,80 | 2 | |
| MEC 90L | 2,2 | 2880 | 86,50 | 0,820 | 3x230/400 | 7,97 | 4,60 | 9,20 | 4,00 | 4,20 | 2 | |
| MEC 100L | 3 | 2900 | 87,10 | 0,890 | 3x400A | 5,60 | 3,23 | 8,80 | 5,50 | 4,50 | 2 | |
| MEC 112M | 4 | 2910 | 88,10 | 0,930 | 3x400Δ | 7,00 | 4,04 | 9,60 | 3,60 | 4,00 | 2 | |
| MEC 132S | 5,5 | 2920 | 89,20 | 0,900 | 3x400Δ | 10,00 | 5,77 | 8,90 | 3,00 | 3,60 | 2 | |
| MEC 132S | 7,5 | 2910 | 90,10 | 0,920 | 3x400Δ | 13,10 | 7,56 | 8,90 | 3,00 | 3,60 | 2 | |
| MEC 160M | 11 | 2950 | 91,20 | 0,890 | 3x400Δ | 19,70 | 11,37 | 9,10 | 4,00 | 4,20 | 2 | |
| MEC 160M | 15 | 2940 | 91,90 | 0,890 | 3x400Δ | 26,70 | 15,42 | 9,70 | 4,70 | 4,80 | 2 | |
| MEC 160L | 18,5 | 2950 | 92,40 | 0,880 | 3x400Δ | 33,00 | 19,05 | 10,70 | 4,60 | 4,70 | 2 | |
| MEC 180M | 22 | 2955 | 92,70 | 0,900 | 3x400Δ | 38,10 | 22,00 | 8,20 | 2,20 | 2,30 | 2 | |
| MEC 200L | 30 | 2960 | 93,30 | 0,890 | 3x400Δ | 52,10 | 30,08 | 7,50 | 2,20 | 2,30 | 2 | |
| MEC 200L | 37 | 2960 | 93,70 | 0,910 | 3x400Δ | 62,60 | 36,14 | 7,50 | 2,20 | 2,30 | 2 | |
| MEC 225M | 45 | 2965 | 94,00 | 0,880 | 3x400Δ | 78,40 | 45,26 | 7,60 | 2,20 | 2,30 | 2 | |
| MEC 250M | 55 | 2970 | 94,30 | 0,890 | 3x400Δ | 94,60 | 54,62 | 7,60 | 2,20 | 2,30 | 2 | |
| MEC 280S | 75 | 2975 | 94,70 | 0,900 | 3x400Δ | 127,00 | 73,32 | 6,90 | 2,00 | 2,30 | 2 | |
| MEC 280M | 90 | 2975 | 95,00 | 0,890 | 3x400Δ | 153,00 | 88,33 | 7,00 | 2,00 | 2,30 | 2 | |
| MEC 315S | 110 | 2978 | 95,20 | 0,900 | 3x400Δ | 185,00 | 106,81 | 7,10 | 2,00 | 2,20 | 2 | |
| MEC 315M | 132 | 2978 | 95,40 | 0,900 | 3x400Δ | 222,00 | 128,17 | 7,10 | 2,00 | 2,20 | 2 | |
| MEC 315L | 160 | 2980 | 95,60 | 0,900 | 3x400Δ | 268,00 | 154,73 | 7,10 | 2,00 | 2,20 | 2 | |
| MEC 315L | 200 | 2980 | 95,80 | 0,920 | 3x400Δ | 330,00 | 190,75 | 6,10 | 1,80 | 2,60 | 2 | |
| MEC 355M | 250 | 2980 | 95,80 | 0,920 | 3x400Δ | 410,00 | 236,99 | 6,90 | 2,00 | 2,90 | 2 | |
| MEC 355L | 315 | 2980 | 95,80 | 0,920 | 3x400Δ | 520,00 | 300,58 | 5,70 | 1,70 | 2,40 | 2 | |
PERFORMANCE RANGE
The performance curves are based on kinematic viscosity values = 1 mm²/s and density equal to 1000 kg/m³. Curve tolerance according to ISO 9906.
GRAPHIC SELECTION TABLE
=14501/min
SELECTION TABLE - KDN 32
| MODEL | Q=m³/h | 0 | 3 | 6 | 12 | 18 | 24 |
| Q=/min | 0 | 50 | 100 | 200 | 300 | 400 | |
| KDN 32-125.1/105 | 工三 | 3,5 | 3,4 | 3,1 | |||
| KDN 32-125.1/110 | 3,9 | 3,8 | 3,5 | ||||
| KDN 32-125.1/115 | 4,25 | 4,2 | 3,9 | ||||
| KDN 32-125.1/120 | 4,7 | 4,6 | 4,3 | ||||
| KDN 32-125.1/125 | 5.1 | 5,1 | 4,8 | ||||
| KDN 32-125.1/130 | 5,6 | 5,6 | 5,3 | ||||
| KDN 32-125.1/135 | 6,1 | 6 | 5,8 | 4.4 | |||
| KDN 32-125.1/140 | 6,6 | 6,6 | 6,4 | 5,1 | |||
| KDN 32-125/115 | 4,3 | 4,1 | 3,2 | ||||
| KDN 32-125/120 | 4,75 | 4,6 | 3,75 | ||||
| KDN 32-125/125 | 5,2 | 5,05 | 4.2 | ||||
| KDN 32-125/130 | 5.7 | 5,5 | 4,8 | ||||
| KDN 32-125/135 | 6.2 | 6 | 5,3 | 3,65 | |||
| KDN 32-125/142 | 6,9 | 6,75 | 6,15 | 4,5 | |||
| KDN 32-160.1/137 | 5,3 | 5,3 | 4,7 | ||||
| KDN 32-160.1/145 | 6,2 | 6,1 | 5 | ||||
| KDN 32-160.1/153 | 7 | 7 | 6,6 | ||||
| KDN 32-160.1/161 | 8 | 7,9 | 7,6 | ||||
| KDN 32-160.1/169 | 8,9 | 8,9 | 8,6 | 5,5 | |||
| KDN 32-160.1/177 | 9 | 9,8 | 9,5 | 6,6 | |||
| KDN 32-160/137 | 5.9 | 5,6 | 4.4 | ||||
| KDN 32-160/145 | 6,7 | 6,5 | 5,3 | ||||
| KDN 32-160/153 | 7,6 | 7,4 | 6,25 | ||||
| KDN 32-160/161 | 8,5 | 8,25 | 7,25 | ||||
| KDN 32-160/169 | 9,5 | 9,3 | 8.4 | 6,6 | |||
| KDN 32-160/177 | 10,5 | 10,4 | 9,6 | 7,8 | |||
| KDN 32-200.1/170 | 8,6 | 8,5 | 7,2 | ||||
| KDN 32-200.1/180 | 9,8 | 9,8 | 9 | ||||
| KDN 32-200.1/190 | 11,3 | 11,1 | 10,5 | ||||
| KDN 32-200.1/200 | 12,8 | 12,7 | 11.7 | 8,3 | |||
| KDN 32-200.1/207 | 13,8 | 13,8 | 13 | 8,9 | |||
| KDN 32-200/170 | 8,6 | 8,2 | 6.7 | ||||
| KDN 32-200/180 | 9,9 | 9,6 | 8,2 | ||||
| KDN 32-200/190 | 11,2 | 10,9 | 9.7 | 7 | |||
| KDN 32-200/200 | 12,6 | 12,3 | 11,1 | 8,7 | |||
| KDN 32-200/210 | 14,3 | 14 | 13,1 | 10,7 | |||
| KDN 32-200/219 | 15,7 | 15,4 | 14,8 | 13 | 9,8 |
SELECTION TABLE - KDN 40
| MODEL | Q=m³/h | 0 | 6 | 12 | 18 | 24 | 30 | 36 |
| Q=I/min | 0 | 100 | 200 | 300 | 400 | 500 | 600 | |
| KDN 40-125/115 | 工三 | 4,2 | 4,1 | 3,8 | 3,2 | 2,4 | ||
| KDN 40-125/120 | 4,6 | 4,5 | 4,2 | 3,7 | 2,9 | |||
| KDN 40-125/125 | 5,1 | 4,9 | 4.7 | 4,1 | 3,3 | |||
| KDN 40-125/130 | 5,5 | 5,4 | 5.2 | 4,7 | 3,9 | |||
| KDN 40-125/135 | 6 | 5,9 | 5,8 | 5,3 | 4,6 | |||
| KDN 40-125/142 | 6,7 | 6,6 | 6,5 | 6 | 5,3 | 4,1 | ||
| KDN 40-160/137 | 5,9 | 5,8 | 5,8 | 5 | 3,7 | |||
| KDN 40-160/145 | 6,7 | 6,6 | 6,5 | 6 | 4,8 | |||
| KDN 40-160/153 | 7,6 | 7,6 | 7.5 | 7 | 6,8 | |||
| KDN 40-160/161 | 8,6 | 8,5 | 8.4 | 8 | 7,1 | 5,6 | ||
| KDN 40-160/169 | 9,6 | 9,5 | 9,5 | 9,1 | 8,3 | 7 | ||
| KDN 40-160/177 | 10,7 | 10,7 | 10,6 | 10,2 | 9,5 | 8,3 | ||
| KDN 40-200/170 | 8.4 | 8,4 | 8,2 | 7,4 | 5,7 | |||
| KDN 40-200/180 | 9,7 | 9,7 | 9,4 | 8,8 | 7,2 | |||
| KDN 40-200/190 | 10,9 | 10,8 | 10,7 | 10,2 | 8,8 | 6,8 | ||
| KDN 40-200/200 | 12,2 | 12,1 | 12 | 11,7 | 10,4 | 8,6 | ||
| KDN 40-200/210 | 13,6 | 13,5 | 13,5 | 13,2 | 12,1 | 10,6 | ||
| KDN 40-200/219 | 15 | 15 | 15 | 14,7 | 13,8 | 12,4 | 10,4 | |
| KDN 40-250/220 | 15,8 | 15,6 | 14,8 | 13,6 | 12 | |||
| KDN 40-250/230 | 17,4 | 17,2 | 16,5 | 15,3 | 13,7 | |||
| KDN 40-250/240 | 19,1 | 19 | 18,2 | 17 | 15,5 | |||
| KDN 40-250/250 | 20,7 | 20,6 | 20 | 18,9 | 17,5 | |||
| KDN 40-250/260 | 22,7 | 22,6 | 22,1 | 21 | 19,5 |
SELECTION TABLE - KDN 50
| MODEL | Q=m³/h | 0 | 12 | 18 | 24 | 30 | 36 | 42 | 48 | 54 |
| Q=I/min | 0 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | |
| KDN 50-125/115 | 工三 | 4,2 | 4,1 | 3,9 | 3,6 | 3,3 | 2,9 | 2,3 | ||
| KDN 50-125/120 | 4,6 | 4,4 | 4,3 | 4 | 3,7 | 3,3 | 2,8 | |||
| KDN 50-125/125 | 5 | 4,9 | 4,7 | 4,5 | 4,2 | 3,7 | 3,3 | |||
| KDN 50-125/130 | 5,6 | 5,4 | 5,2 | 5 | 4,7 | 4,2 | 3,8 | 3,2 | ||
| KDN 50-125/135 | 6 | 5,8 | 5,7 | 5,5 | 5,2 | 4,8 | 4,3 | 3,8 | ||
| KDN 50-125/139 | 6,3 | 6,2 | 6,1 | 5,9 | 5,6 | 5,2 | 4,8 | 4,2 | ||
| KDN 50-125/144 | 6,7 | 6,7 | 6,6 | 6,4 | 6,2 | 5,8 | 5,3 | 4,8 | 4,1 | |
| KDN 50-160/137 | 6 | 6 | 5,9 | 5,6 | 5,2 | 4,8 | ||||
| KDN 50-160/145 | 6,8 | 6,7 | 6,7 | 6,5 | 6,2 | 5,8 | ||||
| KDN 50-160/153 | 7,6 | 7,6 | 7,5 | 7,4 | 7,2 | 6,7 | ||||
| KDN 50-160/161 | 8,4 | 8,4 | 8,3 | 8,2 | 8,1 | 7,7 | ||||
| KDN 50-160/169 | 9,4 | 9,3 | 9,2 | 9,2 | 9,1 | 8,8 | ||||
| KDN 50-160/177 | 10,4 | 10,3 | 10,3 | 10,2 | 10,1 | 9,95 | ||||
| KDN 50-200/170 | 9,5 | 9,3 | 9,2 | 8,8 | 8 | 6,85 | ||||
| KDN 50-200/180 | 10,6 | 10,6 | 10,5 | 10,1 | 9,5 | 8,6 | 7,3 | |||
| KDN 50-200/190 | 11,8 | 11,7 | 11,6 | 11,4 | 10,8 | 10,1 | 8,9 | |||
| KDN 50-200/200 | 13,1 | 13 | 13 | 12,8 | 12,3 | 11,6 | 10,6 | 9,4 | ||
| KDN 50-200/210 | 14,6 | 14,6 | 14,5 | 14,4 | 13,9 | 13,2 | 12,2 | 11 | ||
| KDN 50-200/219 | 16 | 16 | 16 | 15,9 | 15,4 | 14,2 | 13,8 | 12,7 | 11,4 | |
| KDN 50-250/220 | 15,9 | 15,7 | 15,6 | 15,4 | 14,9 | 13,8 | 12,4 | 10,5 | ||
| KDN 50-250/230 | 17,4 | 17,3 | 17,2 | 17 | 16,5 | 15,5 | 14,2 | 12,6 | 10,3 | |
| KDN 50-250/240 | 19 | 19 | 19 | 18,8 | 18,2 | 17,4 | 16,2 | 14,7 | 12,4 | |
| KDN 50-250/250 | 20,8 | 20,8 | 20,7 | 20,6 | 20,1 | 19,2 | 18,1 | 17 | 14,8 | |
| KDN 50-250/263 | 23 | 23 | 22,9 | 22,8 | 22,5 | 21,7 | 20,6 | 19,4 | 17,5 |
SELECTION TABLE - KDN 65
| MODEL | Q=m³/h | 0 | 18 | 24 | 30 | 36 | 42 | 48 | 54 | 60 | 66 | 72 | 78 | 84 | 90 | 102 | 114 |
| Q=I/min | 0 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1700 | 1900 | |
| KDN 65-125/120/110 | 工三 | 3,75 | 3,5 | 3,3 | 3,2 | 2,9 | 2,7 | 2,3 | 1,9 | ||||||||
| KDN 65-125/120 | 4,25 | 3,9 | 3,8 | 3,6 | 3,3 | 3,1 | 2,7 | 2,3 | |||||||||
| KDN 65-125/125 | 4,7 | 4,4 | 4,25 | 4,1 | 3,8 | 3,6 | 3,25 | 2,8 | |||||||||
| KDN 65-125/130 | 5,1 | 4,9 | 4,75 | 4,6 | 4,3 | 4,1 | 3,8 | 3,3 | 2,8 | ||||||||
| KDN 65-125/135 | 5,6 | 5,4 | 5,3 | 5,2 | 4,9 | 4,7 | 4,3 | 3,9 | 3,5 | 3 | |||||||
| KDN 65-125/140 | 6 | 5,9 | 5,8 | 5,7 | 5,5 | 5,2 | 4,9 | 4,5 | 4,1 | 3,6 | |||||||
| KDN 65-125/144 | 6,4 | 6,35 | 6,25 | 6,2 | 5,9 | 5,7 | 5,4 | 5 | 4,65 | 4,2 | 3,7 | ||||||
| KDN 65-160/137 | 5,8 | 5,7 | 5,4 | 5,2 | 4,75 | 4,3 | 3,7 | ||||||||||
| KDN 65-160/145 | 6,5 | 6,5 | 6,3 | 6 | 5,7 | 5,3 | 4,75 | 4,1 | |||||||||
| KDN 65-160/153 | 7,3 | 7,2 | 7,2 | 6,9 | 6,7 | 6,3 | 5,8 | 5,25 | |||||||||
| KDN 65-160/161 | 8,2 | 8,1 | 8,1 | 7,9 | 7,7 | 7,3 | 6,85 | 6,3 | 5,8 | ||||||||
| KDN 65-160/169 | 9,1 | 9,1 | 9 | 8,9 | 8,7 | 8,4 | 8 | 7,6 | 7,1 | 6,4 | |||||||
| KDN 65-160/177 | 10 | 10 | 9,9 | 9,8 | 9,7 | 9,45 | 9,1 | 8,7 | 8,2 | 7,5 | |||||||
| KDN 65-200/170 | 9,3 | 9,3 | 9,2 | 9,2 | 9 | 8,5 | 7,9 | 7,1 | 6,3 | ||||||||
| KDN 65-200/180 | 10,4 | 10.4 | 10,4 | 10,3 | 10,2 | 10 | 9,5 | 8,8 | 8,1 | ||||||||
| KDN 65-200/190 | 12,1 | 12 | 12 | 12 | 11,9 | 11,5 | 11,1 | 10,5 | 9,8 | 8,8 | |||||||
| KDN 65-200/200 | 13,3 | 13,3 | 13,3 | 13,2 | 13,1 | 13 | 12,8 | 12,3 | 11,6 | 10,8 | |||||||
| KDN 65-200/210 | 14,8 | 14,7 | 14,7 | 14,7 | 14,6 | 14,6 | 14,3 | 13,8 | 13,4 | 12,7 | 12 | ||||||
| KDN 65-200/219 | 16,2 | 16,2 | 16,2 | 16,1 | 16 | 15,9 | 15,8 | 15,4 | 15 | 14,4 | 13,5 | 12,7 | |||||
| KDN 65-250/220 | 15,8 | 15,8 | 15,5 | 15,1 | 14,5 | 14 | 13,2 | 12 | 10,7 | ||||||||
| KDN 65-250/230 | 17,4 | 17,.4 | 17,2 | 16,8 | 16,3 | 15,7 | 15 | 14,1 | 12,7 | 11,4 | |||||||
| KDN 65-250/240 | 19 | 19 | 18,9 | 18,5 | 18,1 | 17,5 | 16,8 | 16 | 14,7 | 13,6 | |||||||
| KDN 65-250/250 | 20,7 | 20,7 | 20,6 | 20,4 | 20 | 19,5 | 18,8 | 18 | 17 | 15,9 | 14,5 | ||||||
| KDN 65-250/263 | 23,2 | 23 | 23 | 22,9 | 22,5 | 22,2 | 21,6 | 20,8 | 19,8 | 18,6 | 17,4 | 16 | |||||
| KDN 65-315/260 | 22,3 | 22,2 | 22,1 | 22 | 21,5 | 21 | 20,5 | 20 | 19,2 | 18,4 | 17 | 16 | 15 | ||||
| KDN 65-315/275 | 25,1 | 25,1 | 25 | 24,8 | 24,6 | 24,1 | 23,5 | 23 | 22,5 | 21,5 | 20,5 | 19,4 | 18,1 | ||||
| KDN 65-315/290 | 28,2 | 28,2 | 28,1 | 28 | 27,8 | 27,3 | 27 | 26,5 | 25,5 | 25 | 24 | 23,1 | 22 | 19,5 | |||
| KDN 65-315/305 | 31,7 | 31,5 | 31,4 | 31,4 | 31,3 | 31,2 | 30,8 | 30,4 | 29,6 | 29 | 28 | 27,2 | 26,1 | 23,5 | |||
| KDN 65-315/320 | 35,7 | 35.4 | 35,3 | 35,2 | 35,1 | 35 | 34,8 | 34,5 | 33,8 | 33,5 | 32,5 | 31,5 | 30,8 | 28 | 24,8 |
SELECTION TABLE - KDN 80
| MODEL | Q=m³/h | 0 | 42 | 48 | 54 | 60 | 66 | 72 | 78 | 84 | 90 | 102 | 114 | 120 | 150 | 180 |
| Q=l/min | 0 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1700 | 1900 | 2000 | 2500 | 3000 | |
| KDN 80-160/147/127 | 工三 | 5,7 | 5,4 | 5,25 | 5,05 | 4,8 | 4,6 | 4,35 | 4,15 | 3,85 | 3,6 | 3,1 | 2,5 | 2,2 | ||
| KDN 80-160/153/136 | 6,4 | 6,2 | 6,05 | 5,85 | 5,7 | 5,4 | 5,15 | 4,8 | 4,65 | 4,4 | 3,85 | 3,3 | 3 | |||
| KDN 80-160/153 | 7,3 | 7,1 | 6,9 | 6,7 | 6,5 | 6,3 | 6 | 5,75 | 5,4 | 5,2 | 4,55 | 3,9 | 3,6 | |||
| KDN 80-160/161 | 8,2 | 8 | 7,9 | 7,75 | 7.5 | 7,3 | 7,05 | 6,8 | 6,5 | 6,25 | 5,6 | 4,9 | 4,6 | |||
| KDN 80-160/169 | 9,1 | 9 | 8,85 | 8,7 | 8,6 | 8,35 | 8,1 | 7,85 | 7,6 | 7,3 | 6,75 | 6 | 5,7 | |||
| KDN 80-160/177 | 10 | 9,9 | 9,85 | 9,8 | 9,7 | 9,5 | 9,3 | 9,1 | 8,85 | 8,7 | 8,1 | 7,25 | 6,9 | |||
| KDN 80-200/170 | 9,2 | 9,1 | 9 | 8,7 | 8,5 | 8,2 | 7,8 | 7,5 | 7,1 | 6,7 | 5,6 | |||||
| KDN 80-200/180 | 10,3 | 10,2 | 10,2 | 10 | 9,9 | 9,6 | 9,2 | 9 | 8,6 | 8,2 | 7,2 | |||||
| KDN 80-200/190 | 11,4 | 11,4 | 11,3 | 11,2 | 11,1 | 11 | 10,7 | 10,5 | 10,1 | 9,8 | 8,7 | 6,8 | ||||
| KDN 80-200/200 | 12,7 | 12,6 | 12,6 | 12,6 | 12,5 | 12,4 | 12,3 | 12 | 11,6 | 11,4 | 10,5 | 9,4 | 8,8 | |||
| KDN 80-200/210 | 14,1 | 14 | 14 | 14 | 13,9 | 13,8 | 13,7 | 13,6 | 13,3 | 13,1 | 12,1 | 11,2 | 10,6 | |||
| KDN 80-200/222 | 15,9 | 15,9 | 15,8 | 15,7 | 15,6 | 15,6 | 15,5 | 15,4 | 15,3 | 15 | 14,3 | 13,4 | 12,8 | |||
| KDN 80-250/220 | 16 | 15,9 | 15,8 | 15,7 | 15,6 | 15,5 | 15,2 | 14,9 | 14,5 | 13,9 | 12,8 | |||||
| KDN 80-250/230 | 17,3 | 17,3 | 17,2 | 17,1 | 17 | 16,9 | 16,8 | 16,5 | 16 | 15,5 | 14,3 | 12,4 | ||||
| KDN 80-250/240 | 19 | 19 | 19 | 18,9 | 18,8 | 18,7 | 18,6 | 18,4 | 18 | 17,6 | 16,6 | 15,3 | 14,6 | |||
| KDN 80-250/250 | 20,8 | 20,7 | 20,7 | 20,7 | 20,6 | 20,5 | 20,4 | 20,3 | 19,9 | 19,6 | 18,6 | 17,4 | 16,8 | |||
| KDN 80-250/260 | 22,6 | 22,5 | 22,5 | 22,4 | 22,3 | 22,2 | 22,1 | 22 | 21,8 | 21,4 | 20,6 | 19,6 | 19 | 15,1 | ||
| KDN 80-250/270 | 24,5 | 24,4 | 24,4 | 24,4 | 24,3 | 24,2 | 24,1 | 24 | 23,7 | 23,3 | 22,4 | 21,4 | 20,7 | 16,3 | ||
| KDN 80-315/275 | 24,8 | 24,8 | 24,8 | 24,7 | 24,6 | 24,5 | 24,4 | 24,3 | 24 | 23 | 21,4 | 20,5 | ||||
| KDN 80-315/290 | 27,8 | 27,8 | 27,8 | 27,7 | 27,7 | 27,6 | 27,6 | 27,5 | 27,4 | 26,5 | 25 | 24,6 | 19,1 | |||
| KDN 80-315/305 | 31,4 | 31,4 | 31,3 | 31,2 | 31,2 | 31,2 | 31,2 | 31,2 | 30,9 | 30 | 29 | 28,5 | 24 | |||
| KDN 80-315/320 | 34,8 | 34,7 | 34,6 | 34,6 | 34,5 | 34,4 | 34,3 | 34 | 33,9 | 33,8 | 33,2 | 32,8 | 28,8 | |||
| KDN 80-315/334 | 38,3 | 38,2 | 38,2 | 38,2 | 38,2 | 38,2 | 38,1 | 38 | 37,9 | 37,6 | 37 | 36,9 | 33,1 | 28 |
SELECTION TABLE - KDN 100
| MODEL | Q=m³/h | 0 | 60 | 66 | 72 | 78 | 84 | 90 | 102 | 114 | 120 | 150 | 180 | 210 | 240 |
| Q=I/min | 0 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1700 | 1900 | 2000 | 2500 | 3000 | 3500 | 4000 | |
| KDN 100-200/180 | 工三 | 10.1 | 10.1 | 10.1 | 10 | 9.9 | 9.7 | 9.5 | 9.1 | 8.5 | 8.3 | 7 | 5.4 | ||
| KDN 100-200/190 | 11.6 | 11.5 | 11.4 | 11.3 | 11.2 | 11.1 | 11 | 10.5 | 10.1 | 10 | 8.6 | 7 | |||
| KDN 100-200/200 | 12.9 | 12.8 | 12.8 | 12.8 | 12.7 | 12.6 | 12.5 | 12.2 | 11.8 | 11.6 | 10.4 | 8.8 | |||
| KDN 100-200/210 | 14.3 | 14.2 | 14.2 | 14.2 | 14.2 | 14.1 | 14 | 13.8 | 13.5 | 13.3 | 12.3 | 10.7 | 9 | ||
| KDN 100-200/219 | 16 | 15.7 | 15.7 | 15.6 | 15.6 | 15.5 | 15.5 | 15.3 | 15.1 | 15 | 14 | 12.5 | 10.8 | ||
| KDN 100-250/220 | 15.2 | 14.9 | 14.9 | 14.9 | 14.8 | 14.7 | 14.6 | 14.3 | 13.7 | 13.4 | 11.4 | ||||
| KDN 100-250/230 | 16.9 | 16.7 | 16.7 | 16.6 | 16.5 | 16.4 | 16.3 | 16.1 | 15.7 | 15.3 | 13.6 | 11.1 | |||
| KDN 100-250/240 | 18.5 | 18.3 | 18.3 | 18.3 | 18.2 | 18.1 | 18 | 17.9 | 17.6 | 17.4 | 15.7 | 13.3 | |||
| KDN 100-250/250 | 20.1 | 20 | 20 | 19.9 | 19.8 | 19.7 | 19.6 | 19.5 | 19.4 | 19.2 | 17.6 | 15.4 | |||
| KDN 100-250/260 | 22.3 | 22.1 | 22.1 | 22.1 | 22 | 21.9 | 21.8 | 21.7 | 21.5 | 21.4 | 19.8 | 17.7 | 15.1 | ||
| KDN 100-250/270 | 24.3 | 24.3 | 24.3 | 24.3 | 24.3 | 24.3 | 24.2 | 24.1 | 23.7 | 23.5 | 22.1 | 20.1 | 17.3 | ||
| KDN 100-315/275 | 25,1 | 25 | 25 | 25 | 24.9 | 24.8 | 24.7 | 24.6 | 24.4 | 24 | 22 | 19 | |||
| KDN 100-315/290 | 28 | 27.9 | 27.9 | 27.9 | 27.9 | 27.8 | 27.7 | 27.6 | 27.5 | 27 | 25.5 | 23 | |||
| KDN 100-315/305 | 31.3 | 31.1 | 31.1 | 31.1 | 31 | 30.9 | 30.8 | 30.7 | 30.6 | 30.5 | 29 | 27 | 24 | ||
| KDN 100-315/320 | 34.5 | 34.4 | 34.4 | 34.4 | 34.4 | 34.4 | 34.3 | 34.2 | 34.1 | 34 | 33 | 31 | 28.1 | ||
| KDN 100-315/334 | 38.2 | 38.2 | 38.1 | 38.1 | 38.1 | 38 | 38 | 37.7 | 37.5 | 37.3 | 36.5 | 34.8 | 32 | 28.8 |
SELECTION TABLE - KDN 125
| MODEL | Q=m³/h | 0 | 102 | 114 | 120 | 150 | 180 | 210 | 240 | 270 | 300 | 330 | 360 | 390 | 420 |
| Q=/min | 0 | 1700 | 1900 | 2000 | 2500 | 3000 | 3500 | 4000 | 4500 | 5000 | 5500 | 6000 | 6500 | 7000 | |
| KDN 125-250/220 | 工三 | 15 | 14.9 | 14.9 | 14.8 | 14.5 | 14 | 13 | 11.8 | 10.5 | 9.2 | ||||
| KDN 125-250/230 | 16.6 | 16.6 | 16.6 | 16.5 | 16.3 | 15.6 | 14.8 | 13.8 | 12.5 | 12.3 | 9.5 | ||||
| KDN 125-250/240 | 18.2 | 18.1 | 18.1 | 18.1 | 18 | 17.7 | 16.8 | 15.8 | 14.5 | 13.3 | 11.6 | 10.1 | |||
| KDN 125-250/250 | 19.9 | 19.8 | 19.8 | 19.7 | 19.6 | 19.4 | 18.7 | 17.8 | 16.6 | 15.5 | 14 | 12.3 | |||
| KDN 125-250/260 | 21.7 | 21.7 | 21.6 | 21.5 | 21.4 | 21.3 | 20.6 | 19.9 | 18 | 17.7 | 16.3 | 14.6 | 13 | ||
| KDN 125-250/269 | 23.9 | 23.9 | 23.9 | 23.8 | 23.6 | 23.2 | 22.7 | 22.1 | 22.2 | 20.2 | 19 | 17.5 | 15.6 | 14 |
SELECTION TABLE - KDN 150
| MODEL | Q=m³/h | 0 | 102 | 114 | 120 | 150 | 180 | 210 | 240 | 270 | 300 | 330 | 360 | 390 | 420 |
| Q=I/min | 0 | 1700 | 1900 | 2000 | 2500 | 3000 | 3500 | 4000 | 4500 | 5000 | 5500 | 6000 | 6500 | 7000 | |
| KDN 150-200/210/170 | 工三 | 8.9 | 8.9 | 8.9 | 8.8 | 8.7 | 8.6 | 8.3 | 7.9 | 7.4 | 6.8 | 6.2 | 5.4 | 4.5 | |
| KDN 150-200/218/182 | 10.4 | 10.4 | 10.4 | 10.3 | 10.2 | 9.9 | 9.5 | 9.1 | 8.6 | 8.1 | 7.4 | 6.6 | 5.8 | ||
| KDN 150-200/218/200 | 11.4 | 11.4 | 11.4 | 11.4 | 11.2 | 10.9 | 10.6 | 10.1 | 9.7 | 9.2 | 8.5 | 7.8 | 6.9 | 5.9 | |
| KDN 150-200/218 | 12.9 | 12.7 | 12.7 | 12.6 | 12.4 | 12.1 | 11.7 | 11.2 | 10.7 | 10.2 | 9.6 | 8.8 | 8 | 7.1 | |
| KDN 150-200/224 | 13.8 | 13.6 | 13.6 | 13.5 | 13.3 | 13 | 12.6 | 12.2 | 11.7 | 11.2 | 10.6 | 9.9 | 9.2 | 8.2 |
KDN 32-125.1 - 4 P0LES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
=14501/min
| MODEL | POWER(kW) | MOTOR SIZE | ELECTRICAL DATA | MOTOR TYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-125.1 | 0,37 | MEC 71 | 3x230-400V~ | 1,7/0,975 | - |
| 0,55 | MEC 80 | 3 x230-400V~ | 2,6/1,5 | 一 | |
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-125.1 | 0,37 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 730 | 81 | 830 | 86 |
| 0,55 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 730 | 83 | 830 | 88 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
KDN 32-125 - 4 P0LES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTOR SIZE | ELECTRICAL DATA | MOTOR TYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-125 | 0,37 | MEC 71 | 3 ×230-400V~ | 1,7/0,975 | - |
| 0,55 | MEC 80 | 3x230-400V~ | 2,6/1,5 | 一 | |
| 0,75 | MEC 80 | 3 x230-400 V~ | 3,1/1,8 | IE3 | |
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-125 | 0,37 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 730 | 81 | 830 | 86 |
| 0,55 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 730 | 83 | 830 | 88 | |
| 0,75 | 80 | 60 | 140 | 65 | 177 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 717 | 78 | 817 | 83 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
The performance curves are based on kinematic viscosity values =
KDN 32-160.1 - 4 P0LES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTOR SIZE | ELECTRICAL DATA | MOTOR TYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-160.1 | 0,37 | MEC 71 | 3×230-400V~ | 1,7/0,975 | - |
| 0,55 | MEC 80 | 3x230-400V~ | 2,6/1,5 | 一 | |
| 0,75 | MEC 80 | 3x230-400V~ | 3,1/1,8 | IE3 | |
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-160.1 | 0,37 | 80 | 60 | 160 | 65 | 197 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 730 | 83 | 830 | 88 |
| 0,55 | 80 | 60 | 160 | 65 | 197 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 730 | 86 | 830 | 91 | |
| 0,75 | 80 | 60 | 160 | 65 | 197 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 717 | 80 | 817 | 85 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
For MEl index refer to the hydraulic efficiency section.
KDN 32-160 - 4 POLES - STANDARDISED PUMPS Pumped liquid temperature range: from -10 °C to +140 °C - Maximum ambient temperature: +40°C
| MODEL | POWER(kW) | MOTOR SIZE | ELECTRICAL DATA | MOTOR TYPE | |
| POWER INPUT50 Hz | InA | ||||
| KDN 32-160 | 0,37 | MEC 71 | 3×230-400V~ | 1,7/0,975 | - |
| 0,55 | MEC 80 | 3x230-400V~ | 2,6/1,5 | 一 | |
| 0,75 | MEC 80 | 3x230-400V~ | 3,1/1,8 | IE3 | |
| 1,1 | MEC 90S | 3x230-400V~ | 4,3/2,5 | IE3 | |
| MODEL | POWER(kW) | UNIT DIMENSIONS (mm) | FLANGEDIMENSIONS (mm) | STANDARDCOUPLING | SPACERCOUPLING | ||||||||||||
| A | A2 | H2 | H | H3 | L1 | L3 | B2 | B3 | D | DNA | DNM | L | WEIGHTKg | L | WEIGHTKg | ||
| KDN 32-160 | 0,37 | 80 | 60 | 160 | 65 | 197 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 730 | 83 | 830 | 88 |
| 0,55 | 80 | 60 | 160 | 65 | 197 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 730 | 85 | 830 | 90 | |
| 0,75 | 80 | 60 | 160 | 65 | 197 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 717 | 80 | 817 | 85 | |
| 1,1 | 80 | 60 | 160 | 65 | 197 | 800 | 540 | 360 | 320 | 19 | 50 | 32 | 762 | 78 | 862 | 83 | |
Dimension and electrical data based on sizing definition following the instructions on page 105.
