该页无缩略图
The Largest Adhesive R&D Manufacturer in Ch
ina
Six production bases cover Shanghai, Guangzhou, Changzhou, Xiangyang and Yicheng, and total floor area exceeds 1{,}200{,}000{~m}^{2}
About US
Huitian New Material (stock code: 300041) is the sole enterprise of Chinese adhesive new material industry with the longest history and most categories. With 46 years of development history, Huitian focuses on the research and development of adhesive new materials and owns over 2,000 products in six major disciplines. These products are widely used in fields such as photovoltaic new energy, new energy automobile, 5G communications, consumer electronics, aviation & aerospace and others, providing comprehensive solutions for adhesive new materials.
Huitian is the sole enterprise of Chinese adhesive new material industry with the widest layout and highest research and development investment. It has established five major research and development bases in Shanghai, Guangzhou, Xiangyang, Yicheng, and Changzhou, as well as industrial bases in Vietnam. Huitian has a core research and development team of over 300 people, including doctors and masters, and has obtained more than 300 patented technologies. It is the first "National Enterprise Technology Center" in the domestic adhesive new material industry.
Huitian is the sole enterprise of Chinese adhesive new material industry focusing on core tracks and fully replacing import enterprises. It has established strategic cooperation with benchmark customers in three core tracks: photovoltaic new energy, lithium battery industry and communication electronics, such as Huawei, CATL, LONGi and Nissan, making it the preferred brand for domestic replacement of adhesive new materials.
Huitian is the sole enterprise of Chinese adhesive new material industry with sustained growth and the strongest development momentum. Its performance has continued to grow steadily over the 13 years since its listing, effectively promoting the development of national adhesive new materials. Huitian has always adhered to the mission of "serving the industry and society", striving to empower employees, satisfy customers, achieve win-win partnerships, increase shareholder value, and gain trust from society, thus contributing to the dignity of national enterprises.
Contents
Huitian Introduction
2 Layout
Electrical Product Layout of New Energy Automobile....03
Full Range of Adhesive Product Solutions .04
Solutions
Charging Gun. .05
DC Charging Module. ..06
On-board Power Supply. .07-08
Motor Controller.. .09-10
Drive motor... .11
Universal Conformal Coating & TIM Materials. .12
Electric Product Layout of New Energy Automobile
Complete Adhesive Product Solution
Charging Gun
Potting Protection 8252 Series
The charging gun after potting protection can improve theelectrical andelectronicperformanceto reach the anti-rolling, water-proof, insulating and flame retarding effect.
·Fast curing in normal temperature ·High adhesion strength ·Excellent electrical performance
Potting Adhesive for Charging Gun
| Produet | Appearance | Viscosty | Densty | Ratio | HSardnes | |||||
| 8252H | Part A | Black | 12,500-14,500 | 1.50-1.56 | 5:1 | 4-6 | 1-4 | 40-50 | 0.7 | V-0(4mm) |
| Part B | Light brown | 2,900-3,500 1.38-14.2 | ||||||||
| 8252L | Part A | Black | 6,500-7,800 | 1.55-1.60 | 5:1 | 4-6 | 1-4 | 60-70 | 0.6 | V-0(4mm) |
| Part B | Light brown | 100-170 | 1.22-1.24 | |||||||
DC Charging Module
ShallowPotting52XXSeries
It is applied in coastal area, metallurgy, coal mine, electroplating and other extreme environment or scene to avoid the invasion of water steam and dust.
High mobility
Anti-poisoning
Excellent heat-conducting property, adaptive to higher powermodule
One-part Fixing / Dam Adhesive 9765C
High extruding
High Aspect Ratio (H/W)
No toxic reaction to the addition-type potting glue
| Produiet | Appearance | Viscosty | RMio | Densty | CoThertiaity W/(m·k) | Hardnes perating | min | Condition Curing | Dieletrie kV/mm | |
| 5280 | Part A | Gray | 2,000~3,500 | 1:1 | 1.80 | ≥0.6 | 20-40 | 60 | 80℃ 30min | ≥14 |
| Part B | White | 2,000~3,500 | ||||||||
| 5299 | Part A | Gray | 2,000~3,000 | 1:1 | 1.59 | ≥0.6 | 50-60 | ≥70 | 80℃ 30min | ≥20 |
| Part B | White | 1,800~3,000 | ||||||||
| 5290D | Part A | Gray | 4,500~7,500 | 1:1 | 2.75 | 2.0 | 30-45 | ≥60 | 80℃ | ≥13 |
| Part B | White | 4,000~7,000 | ||||||||
| Produet | Appearance | Density | Thixotropy | HSsrdrees | s | Diels | ||
| 9765C | White paste | 1.70-1.85 | 3-5 | 0.8 | 75-85 | 2.0 | ≥18 | UL94 V-0 |
On-board Power Supply (DC-DC、OBC)
Shell Sealing FIPG: 9661 Series
Universality for substrate
High adhesion strength and elongation at break
·No corrosion to substrate
Magnetic Device Heat Conducting and Protection 529X Series
Huitian potting adhesive integrating the structural and thermal characteristics of magnetic devices can be tailored to match products with different modulus and heat-conducting property. It can provide good protection and thermal insulation for devices, such as inductors and transformers, effectively preventing problems such as core cracking and excessive temperature rise.
●1.0\~4.0W/(m-K) products are optional
·Low modulus and low CTE
Self-adhesion
→Anti-poisoning
Power device heat conducting 2.0-6.0W/ (m.K) Thermal Gel Series
With the increasing power density of devices, the heat generated during operation also increases.Coating the interface between heating device and heat sink with thermal gel can effectively improve the heat conducting efficiency and prevent making damage to device caused by excessive temperature rise.
High extruding and good workability Low oil extraction rate Excellent insulation performance High reliability
ShellSealantFIPG
| Produet | Color | Exrding | Surface Dry | HSardnes | Praduet | |||
| 9661 | Black/white /grey | 14.9 | 15 | 35 | 2.5 | 413.5 | 2.53 | Anti-yellowing |
| Prodlet | Appearance | Extruding | Densty | Diesse | ||||
| 9503 | Blue | 40 | 2.1 | 2.0 | 0.120 | 0.701 | ≥5 | ≥1×1012 |
| 9503L (Post-cured type) | Pink | 120 | 2.9 | 3.0 | 0.022 | 0.11 | 6 | ≥1×1013 |
| 9504 | Pink | 30 | 3.2 | 4.0 | 0.100 | 0.37 | ≥6 | ≥1×1013 |
| 9506 | Blue | 30 | 3.4 | 6.0 | 0.085 | 0.18 | ≥4 | ≥1×1012 |
| Produet | Appearance | Viscosty | Courinion | Densty | (Sardnes) | Diesce | ||||
| 5272 | Part A | White paste | 150-200 | 80°℃ | 2.8 | 2.5 | 0.60 | 50 | 0.40 | 10 |
| Part B | Blue paste | 150-200 | 30min | |||||||
| 5274 | 3.2 | 3.8 | 0.55 | 50 | 0.25 | 9 | ||||
| 15-250 | 21209℃C | |||||||||
| 5276 | Part A | White paste | 400 | 60℃ | 3.3 | 6.0 | 0.41 | 60 | 0.35 | 9 |
| Part B | Blue paste | 500 | 30min | |||||||
| Produet | Appearance | Viseoity | Density | HSardres | ||||
| 5296 | Part | Giraye | 2,800-4,800 | 1.95 | 1.0 | 30-40 | ≥18 | ≥1.0×1014 |
| 5297G | Part A Part B | Gray White | 2,000-4,000 1,500-3,500 | 2.52 2.52 | 1.5 | Shore 00 50-60 | ≥16 | ≥1.0×1013 |
| 5297C | Part | Wraye | 2.6.s | 1.7 | 10~20 | ≥16 | ≥1.0×1012 | |
| 5290G | Part | 2.75 | 2.0 | 5-15 | ≥16 | ≥1.0×1014 | ||
| Part A | Winike Pink | 14,000-22,000 | 3.15 | Shore 00 | ||||
Motor controller
Shell Sealing CIPG: 9516
It can be assembled and disassembled repeatedly Excellent resilience Resistant to multiple medium oils
Power Device Heat Conducting 9504LH
It is used for interface heat dissipation between IGBT module baseplate and liquid cooling plate. The operation process and BLT can be comparable to silicone thermal grease, and its reliability is improved greatly compared with silicone grease.
●High heat conductivity: 4.0W/(m.K) Low thermalresistance:0.07°C-cm2/W It can significantly improve pump-out problem
Shell Sealant (CIPG)
| Products | Condition Curing | Appearance | Density g/cm3 | HSardres | Sherstenath | shearserth | ||
| 9516 | 150°℃/30Min | Grey paste | 1.1 | 49 | 3.4 | 2.2 | 4.7 | 400 |
PowerDeviceThermal Gel
| Produet | A-Ppear | Extruding g/min | Densty | Conrinon | Diestne | ||||
| 9504LH | Light green | 50 | 3.2 | 125°℃ heating platform 10min | 4.0 | 0.012 | 0.07 | ≥6 | ≥1×1013 |
Encapsulation Gel 5298 Series
IGBT modules, as the core part of motor controllers in new energy automobiles, play a crucial role in power control. The sealing adhesive is used and can enable chip with anti-vibration and insulation effects, enhancing the overall waterproof and anti-condensation performance of module.
ShellAdhesion9516FW
+Heating and fast curing
·High adhesion strength
Friendly matching with potting adhesive
Extremely low modulus Self-adhesion High insulating Excellent heat resistance Excellent heat resistance
IGBTShell SealingAdhesive
| Produet | Appearance | Visceosty | Density | Curing Time | Hardres | Elonsatonat | s | |
| 9516FW | White paste | 120~250 | 1.1 | 120°℃/1h | 35 | 4.5 | 350 | 4.0 |
IGBTPottingAdhesive
| Praduet | Appearance | Vispsity | Densty | Condition Curing | Pecomion | Diele | Ter | |||
| 5298C | Part A | Transparent | 500-1,500 | 0.97 | 80°℃ 30-60min | Whole cone 250-350 | 2.6 | 20 | ≥1×1015 | -50~150 |
| Transparent | ||||||||||
| Part B | 500-1,500 | 0.97 | ||||||||
| 5298D | Part A | Transparent | 300-600 | 0.98 | 30-80gcn | 13 0-30 | 2.5 | ≥20 | ≥1×1015 | -50~175 |
| Part B | Transparent | 300-600 | 0.98 | |||||||
| 5298E | 0.99 | 30-0min | 1/2 cone | 2.6 | ||||||
| Part A | Transparent | 300-600 | ||||||||
| Part B | 20-40mcin | |||||||||
| Light brown | 300-600 | 0.99 | 130-230 |
Drive motor
Stator / Rotor Potting 6312T
·Good mobility
The product has excellent heat resistance
Good solvent resistance
Magnetic Steel Bonding Adhesive 6065 Series
● One-part heating and curing High adhesion strength Excellent heat resistance
| Praduet | Appearance | Viseosity | Density | Ratio | Condinion | Diels | ||||
| 6312T | Part A black Part B light | 12,000-20,000 | 1.70 0.98 | 100:13 | 1,000-3,000 | 60°℃/3h | ≥20 | ≥1.0×1014 | ≥0.6 | -40~155 |
MagneticSteel BondingAdhesive
| Prodlet | Appearance | Viscsty | Densty | Cnrinion | HSardrees | ||
| 6065 | Grey paste | 550,000 | 1.55 | 120℃/30min 150°℃/15min | ≥75 | ≥18 | -40~150 |
| 120°℃/40min | |||||||
| 6065H | 120,000 | 1.73 | 150°℃/15min | ||||
| Grey paste | ≥75 | ≥10 | -40~200 | ||||
| 180C/10min |
Universal Adhesive
Conformal Coating (UV+ Moisture)
| Proaduet | Appearance | Viseosity | Conteit % | RO | Reworkability | |||
| 361216 | Aramberand | 100 | >99.5% | 1-3 | ≥25 | ≥1014 | -65~150 | Duringthg ross proofing glue,the |
| 3610H3 | Armberand | 300 | >99.5% | 1-3 | ≥25 | ≥1014 | -65~150 | cleaning agent 1050 can be used for |
| 3612H6 | Armber and | 600 | >99.5% | 1-3 | ≥25 | ≥1014 | -65~150 | After curing, the peint flm yan he highly effective repairing agent 1060 |
| Produet | Appearance | Viscesity | Thizotrepie | Densty | Surhe r | HSarodes | |||
| 9661E | Grey/white paste | 30,000-50,000 | 3.0-4.0 | 0.6 | 1.75 | 5~15 | 65-76 | ≥2.0 | -40~150 |
| 9765 | White slumping fluid | 4,500-55,000 | 2.5-3.5 | 1.0 | 1.85 | 5~10 | 65-85 | ≥2.0 | -40~150 |
| 9665ET | White microflow | 60,000-120,000 | 3.0-4.0 | 2.0 | 2.7 | 1~5 | 75-95 | ≥2.0 | -40~150 |
Silicone thermal grease
| Produet | Appearance | Viseosty | Densty | Charodersties | ||||
| 0112 | White | 200,000 | 2.6 | 1.5 | 0.3 | 340 | -40~150 | Easy for paint coating,and low oil leakage |
| 0116Y | Blue | 140,000 | 3.1 | 3.2 | 0.11 | 290 | -40~150 | High heat conductivity, and easy for paint coating |
| 0117 | White | 120,000 | 3.3 | 4.0 | 0.07 | 290 | -40~150 | High heat conductivity, and good insulativity |
Guangzhou Huitian New Material Co., Ltd.
Address 1: No.6, Qibei Road, Xinhua Street, Huadu District, Guangzhou City
Address 2: No. 16, Yanjiang Avenue, Huadu District, Guangzhou City
Tel.: 020-36867996; Fax: 020-36867991
Zip Code:510800;Website:www.huitian.net.cn Limited Guarantee Information-please read it carefully
habdi Ca fullatsfi
hHif your compensation is limited to the replacement of any products that do not meet the guarantee.
