该页无缩略图
环境可靠性检测仪器服务商
Environmental Reliable Test Equipment Supplier
温度系列 Temperature Testing Series
HUD-E702 可程式恒温恒湿试验箱 01
Programmable Temperature and Humidity Chamber
HUD-E705步入式恒温恒湿试验室
Walk-In Temperature and Humidity Room
HUD-E703 冷热冲击试验箱 03
Thermal Shock Test Chamber
HUD-E708快速温度变化试验箱
Rapid-rate Thermal Cycle Chamber
HUD-E714高空低气压试验箱
Altitude Test Chamber
HUD-E809 温湿度振动综合试验箱 05
Vibration Test System with Temperature & Humidity Chamber
老化系列 Accelerated Aging Testing Series
HUD-E801 臭氧老化试验箱 06
Ozone Aging Test Chamber
HUD-E808盐雾试验箱
Salt Spray Chamber
HUD-E802 UV耐候试验箱
UV Weathering Test Chamber
HUD-E704耐黄老化试验箱
Anti-yellowing Aging Test Chamber
HUD-E711 氙灯耐候试验箱
Xenon Weathering Test Chamber
HUD-E818-1 PCT高压老化试验箱
PCT High-pressure Aging Test Chamber
HUD-E818-2高压加速老化试验箱 09
HAST High pressure Accelerated Aging Test Chamber
目录Contents
IP系列 IP Testing Series
HUD-E710-1 滴水试验箱IP12 10
Water Drip Test Chamber (IPX1, IPX2)
HUD-E710-2淋雨试验箱IP34 10
Water Spray Test Chamber (IPX3, IPX4)
HUD-E710-3 淋雨试验箱IP56
Water Shower Test Chamber (IPX5, IPX6)
HUD-E710-4 加压浸水试验箱IP78 12
Water Immersion Test Chamber (IPX7, IPX8)
HUD-E710-5IPX9K 高温高压喷射试验箱 12
High Temperature and Pressure Water Test Chamber (IPX9K)
HUD-E710-6 汽车淋雨试验室 13
Vehicle Rain Test Room
HUD-E706 砂尘试验箱
Dust Test Chamber
HUD-E706 砂尘试验室 14
Dust Test Room
VOC系列 voc Testing Series
HUD-F801-3甲醛气候箱 15
Formaldehyde Test Chamber
HUD-F801-3A甲醛预处理环境舱
Pre-conditioning Formaldehyde Test Chamber
HUD-F801-4 VOC释放舱 16
VOC Test Chamber
其他 others
其他仪器 17-18
Other Equipment
温度系列 Temperature Testing
HUD-E702高低温湿热交变试验箱 Programmable Temperature and Humidity Chamber
| 项目Item | 数据Specifications | ||
| 容量Capacity | 100L | 150L | 225L |
| 内箱尺寸Inner size（W×H×D) | 400×500×500mm | 500×600×500mm | 500×750×600mm |
| 外箱尺寸Outer size(W×H×D） | 900×1410×1100mm | 1000×1510×1100mm | 1000×1650×1200mm |
| 容量Capacity | 408L | 1000L | 1 |
| 内箱尺寸Inner size(W×H×D) | 600×850×800mm | 1000×1000×1000mm | 1 |
| 外箱尺寸Outer size（W×H×D） | 1120×1750×1400mm | 1500×2000×1400mm | 1 |
| 温度范围/精度Temp. range & accuracy | 范围：-20℃，-40℃，-60℃，-70℃~150℃；精度:0.01℃Range:-20℃, -40℃, -60℃, -70℃~150℃; accuracy:0.01℃ | ||
| 温度偏差Temp. deviation | ±0.5℃ | ||
| 温度波动度Temp. fluctuation | ≤±0.5℃(空载)，(注:如按GB/T5170.2-2008表示，波动度为≤±0.25℃)≤ ±0.5℃(without loading), Note: If according to GB/T5170.2-2008, temp. fluctuation is ≤ ±0.25℃ | ||
| 温度均匀度Temp. uniformity | ≤2℃(空载)，50mm≤SENSOR置放点（离内箱壁内尺寸1/10处）≤500mm≤2°C (without loading), 50mm≤SENsOR place point (1/10 distance of the size of the inner box wall)≤500mm | ||
| 湿度范围/精度Humid. range & accuracy | 范围range:20%~98%RH;精度accuracy:0.1%RH | ||
| 湿度偏差Humid.deviation | |||
| 湿度波动度Humid. fluctuation | ≤±2%RH | ||
| 升/降温速度Heatingrate | 升温:平均3℃/min；降温:平均1℃/min(空载)Heating Rate:3C/min in average Cooling Rage:1 °C/min in average(without loading) | ||
| 项目Item | 数据Specifications |
| 定制尺寸Customized Size | 4m³~100m³（定制型Customized) |
| 温度范围Temp. Range | 0℃;-10℃;-20℃;-40℃;-70℃~+150℃ |
| 湿度范围Temp. Range | 20%~98%RH |
| 降温速率Cooling Rate | 平均1℃/min，线性降温速率及快速降温速率可定制1°C/min in average, Linear and fast cooling rate can be customized |
| 升温速率Heating Rate | 平均3℃/min，线性升温速率及快速升温速率可定制3°℃/min in average, Linear and fast heating rate can be customized |
| 温度均匀度、偏差Temp. Uniformity & Deviation | 均匀度:≤2℃；偏差:≤±2℃Uniformity: ≤2℃; Deviation: ≤±2℃ |
| 湿度均匀度、偏差Humid. Uniformity & Deviation | 均匀度:≤3%RH;偏差: ≤±2%RHUniformity: ≤3% RH; Deviation: ≤±2%RH |
温度系列 Temperature Testing
Thermal Shock Test Chamber(three-zone type)
主要技术参数Technical Parameters
| 项目Item | 数据Specificationsc高温high temp.:RT~170℃;低温low temp.:-75℃~RT测试区testingspace:-65℃~150℃高温hightemp.:60℃~150℃;低温lowtemp.:-10℃~-65℃常温区normaltemp.:室内温度RT | ||
| 储能范围Pre-heat/Pre-cooling Temp. Range | |||
| 温度冲击范围Thermal shocking range | |||
| 储冷时间Pre-cool Time | Rt→-75℃ ≤ 60min | ||
| 储热时间Pre-heat Time | Rt→170℃ ≤ 15min | ||
| 型号Model | HUD-E703-50S65 | HUD-E703-100S65 | HUD-E703-150S65 |
| 额定功率Rated Power | 22KW | 32KW | 38KW |
| 标称内容积Volume(L) | 50L | 100L | 150L |
| 内箱尺寸InnerSize(W×H×D) | 350×400×350mm | 500×400×500mm | 500×600×500mm |
| 外形尺寸OuterSize(W×H×D) | 1260×1720×1800mm | 1380×1780×1900mm | 1380×1980×2050mm |
HUD-E703冷热冲击试验箱（二箱式）
Thermal Shock Test Chamber(two-zone type)
主要技术参数Technical Parameters
ip17www.jp17.com 400-6886-45嘉品仪器
| 项目Item | |||
| 储能范围Pre-heat/Pre-cooling Temp. Range | |||
| 温度冲击范围Thermal shocking range | |||
| 储冷时间Pre-cool Time | |||
| 储热时间Pre-heat Time | |||
| 型号Model | HUD-E703-50E65 | HUD-E703-100E65 | |
| 额定功率RatedPower | 22KW | 32KW | 38KW |
| 标称内容积Volume(L) | 50L | 100L | 150L |
| 内箱尺寸InnerSize(W×H×D) | 350×400×350mm | 500×400×500mm | 500×600×500mm |
| 外形尺寸Outer Size (W × H×D) | 1250×1890×1950mm | 1380×2140×2130mm | 1490×2080×2280mm |
HUD-E708快速温度变化试验箱 Rapid-Rate Thermal Cycle Chamber
| 项目Item | |
| 数据Specifications-20℃;-40℃;-70℃~+150℃±0.3℃ | |
| 温度范围Temp.range | |
| 温度波动度Temp. fluctuation | |
| 温度均匀度Temp.uniformity | ≤2.0℃ |
| 温度偏差Temp.deviation | ±1℃（空载withoutloading) |
| 升温速率Heating rate | -55℃~+150℃线性linearline control:10℃/min(空载withoutloading) |
| 降温速率Coolingrate | +150℃~-55℃线性linearline control:10℃/min（空载withoutloading) |
| 标准负载Standard heating load | 5kg铝片，300W发热量，可定制Can be customized |
| 升降温过冲Heating & Cooling Overshoot | ≤±2℃ |
HUD-E714高空低气压试验箱 Altitude Test Chamber
| 项目Item | 数据Specifications | |
| 温度范围Temp.range | -70℃~+150℃ 波动度Fluctuation：±0.5℃ | |
| 温度波动度/均匀度 Temp. fluctuation & uniformity | 均匀度Uniformity：±2℃ | |
| 环境湿度Environmental humid. | ≤95%RH | |
| 湿度范围Humid.range | 20%~98%RH | |
| 湿度波动度/均匀度 Humidity fuctuation & uniformity | 波动度Fluctuation:±2.5℃；均匀度Uniformity:±3℃ | |
| 冷却速度Coolingrate | 平均≥1℃/min(静态负载15kg，+85℃~-55℃时） 1°℃/min in average (Static load 15kg, Temp. range +85℃~-55℃) | |
| 加热速度Heatingrate | 平均1℃/min(静态负载，+85℃~-55℃时） 1°℃/min in average (Temp. range +85℃~-55℃) | |
| 压力范围/精度 Pressure range & accuracy | 范围Range:50.5kPa~101.5kPa；精度Accuracy:±5% |
HUD-E809温湿度三综合试验箱 Vibration Test System with Temp. & Humidity Chamber
本产品是试验箱和振动试验系统的综合，试验时将温度、湿度、振动、正弦振动或随机振动以及电应力按规定的周期综合在同一气候试验箱中施加到样品上进行温度、湿度振动的综合试验。
This machine is mainly the synthesis of the test chamber and vibration test system.
During test: temperature, humidity, vibration (high or low temperature), (sinusoidal vibration or random vibration) and electrical stress are applied to the sample in the same climate test chamber for comprehensive test of temperature and humidity vibration according to the specified period.
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications |
| 温度范围Temp. range | 0℃, -20℃,-40℃,-70~+150℃ |
| 温度波动度/均匀度Temp. fluctuation & uniformity | 波动度≤±0.5℃；均匀度：≤2℃(空载）Fluctuation:≤±0.5℃;Uniformity:≤2℃(Withoutloading) |
| 温度偏差Temp.deviation | ≤2.0℃ |
| 湿度偏差Humidity deviation | ≤±3% |
| 湿度范围Humidity range | 20%~98%RH |
| 湿度波动度/均匀度Humidity fluctuation & uniformity | 波动度Fluctuation:±2.5℃；均匀度Uniformity:±3℃ |
| 升温速率Heatingrate | 3~5℃/min，可定制Can be customized |
| 降温速率Coolingrate | 0.7～1.2℃/min，可定制Can be customized |
| 额定正弦激振力Rated sinusoidal excitation force | 3kN,6kN,10kN,20kN,30kN,50kN,可定制Can be customized |
| 额定随机激振力Rated random excitation force | 3kN,6kN,10kN,20kN,30kN,50kN,可定制Canbe customized |
| 冲击激振力Impact excitation force | 6kN,12kN,20kN,40kN,60kN,100kN,可定制Can be customized |
| 湿度偏差Humidity deviation | ≤±3% |
| 振动方向Vibration direction | 垂直、水平垂直Vertical/Horizontal and vertical |
| 最大加速度Max.acceleration | 981 m/s² |
| 额定速度Rated speed | 2m/s |
| 频率范围Frequency range | 5Hz~3000Hz,5000Hz |
| 工作振幅Working vibration | 0-25.4mm;0-51mm; 0-76mm |
老化系列 Accelerated Aging Testing
HUD-E801臭氧老化试验箱 Ozone Aging Test Chamber
臭氧老化试验箱为电线电缆，橡胶及聚合物等产品测试提供精准的臭氧浓度环境。此设备广泛应用于加速老化研究，质量控制和质量保证，研发中心抗裂性试验机配方实验等。
Ozone aging test chamber provides an accurate ozone concentration environment for testing wires, cables, rubber and polymers. This equipment is widely used in accelerated aging research, quality control and quality assurance, crack resistance testing in R&D center etc
主要技术参数Technical Parameters
| 项目Item | 数据Specifications门±2℃a30%~85%RH |
| 湿度偏差Temp.deviation | |
| 湿度范围Humid.range | |
| 温度范围Temp.range | RT+10℃~80℃(60℃以上需拆下臭氧传感器，建议使用温度40℃)RT+10℃~80℃ (suggest to use 40 ± 2℃, require to take off ozone sensor if temp. up to 60℃) |
| 温度波动度Temp.fluctuation | ±0.5℃ |
| 臭氧浓度Ozone concentration | 50~100 pphm, 50~1000 pphm, 100~1000 pphm, 可调, Adjustable |
| 臭氧控制精度Ozone control accuracy | ±10%FS |
| 试样架Sample holder | 不锈钢试样架*2/动态样品架*1Stainless Steel304*2/Dynamicrotating sample holder*1 |
| 控制器Controller | LCD可程式控制器，触摸操作;LCD programmable controller, touch screen |
| 臭氧发生器 Ozone generator | 无声高压戳发臭氧发生器; High pressure silence discharge type |
HUD-E808盐雾腐蚀试验箱 Salt Spray Chamber
本试验箱针对各种材质的表面处理，包含涂料、电镀、无机及有机皮膜，阳极处理防锈油等防蚀处理后，测试其制品的耐蚀性。
The machine adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive freatment to test the corrosion resistance of their products.
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications |
| 型号Model | HUD-E808-60/90/120/160 |
| 控制器Controller | 触摸屏、按键式;PLC/Touch-tone controller |
| 喷雾方式Spray method | 连续、周期任选（触摸屏） Continuous and periodic are optional(PLC type) |
| 喷雾系统Spray system 盐雾沉降量 | 塔式喷雾装置加无结晶喷雾 Tower spray device with no crystallization nozzle |
| Salt spray settlement 温度波动度/均匀度 | 1.0-2.5ml/80cm.hr² 波动度：±0.5℃，均匀度：2℃； |
| Temp. fluctuation & uniformity | Fluctuation ±0.5℃, uniformity: 2℃ 试验室:RT+5℃~55℃;饱和桶:RT+5℃~63℃; |
| 温度范围Temp.range | Inner chamber: RT+5℃~55℃ Saturated air barrel tank: RT+5℃~63℃ |
| 电源Power | AC220V ± 10% 50Hz |
HUD-E802 UV老化试验箱 UV Weathering Test Chamber
本试验箱模拟太阳光的紫外光谱，程序设定温度，光照及淋雨等条件。用于测试在光照条件下对产品造成的损害，如变色，龟裂，裂纹，强度下降，氧化等。耐光能力或单一耐湿能力减弱或失效，从而广泛用于对材料耐气候性能的评价。
This machine can simulate the UV spectra of sunlight, exposes materials to alternating cycles of UV light and moisture at controlled, elevated temperatures. It’ s used to test types of damages include colour change, gloss loss, chalking, cracking, crazing, hazing, blistering, strength loss and oxidation.
主要技术参数Technical Parameters
| 项目Item | |
| 数据SpecificationsRT+20℃~70℃±1℃50℃~70℃，可设定adjustable | |
| 温度范围Temp.range | |
| 温度波动度Temp.fluctuation | |
| 黑板温度Black panel temp. | |
| Uv灯管UVlamp | 8支pcs，约Approx.1600小时运行寿命hourslifetime |
| 紫外线波长Ultraviolet wavelength | 290nm~400nm(峰值波长313nm，340nm，可选;Peak wavelength 313nm, 340nm, adjustable) |
| 有效辐照区域Effective irradiation area | 900×210mm |
| 设备款式Machine type | 斜塔式、箱体式；Standard Type, Flat Type |
| 电源Power | 1 ∮,AC220V/50Hz,约Approx. 5 kW |
HUD-E704耐黄老化试验箱 Anti-yellowing Aging Test Chamber
本产品可做二种测试：老化与耐黄变。
老化：可促进橡胶的劣化，计算加热前后拉力及伸长变化，在70℃下测试一天，理论上相当于暴露在大气中6个月的时间。
耐黄：模拟大气环境中受阳光紫外线照射，外观变化一般认为在50℃下测试9小时，理论上相当于暴露在大气中6个月的时间。
This machine can do two kinds of testing: Aging and Anti-yellow.
Aging:Can promote the increase of sulfur rubber deterioration, to calculate the change rate of tensile and elongation before and after heating. The test is done for one day at 70 degree, in theory as exposed to the atmosphere for 6 months.
Anti-yellowing: This machine is used to simulate the atmosphere environment, driven by the sun ultraviolet radiation. The test is done under 50 degree for 9 hours, in theory as exposed to atmosphere for 6 months.
| 主要技术参数Technical Parameters |  | ||
| 项目Item | 数据Specifications | ||
| 内箱尺寸Internal dimension | 500×500×600mm(W×D×H) | ||
| 外箱尺寸External dimension | 940×700×1350mm(W×D×H) | ||
| 温度范围Temp.range | 常温+10℃~+200℃ Room temp.+10℃~+200℃ | ||
| 转盘直径Turntable diameter | 35cm | ||
| 时间记忆Time memory | 0~999小时hours，停电记忆型，含蜂鸣器 | ||
| 转盘速度Turntable speed | Automatic;power cut-off memory, including buzzer (10 ± 2) r/min, can be adjusted | ||
| Uv灯泡UVlamp | 300W | ||
| 灯泡寿命Lamp Bulb | 1200h | ||
| 电源Power | 1 ∮, AC 220V,约Approx. 2.8 kW | ||
HUD-E711氙灯耐候验箱 Xenon Weathering Test Chamber
本试验箱采用氙弧灯，模拟全太阳光谱且存在于不同环境下的破坏性光波。提供相应的环境模拟和加速试验，专门用于科研，产品开发和产品质量管控等等。
This machine adopts a xenonarc lamp, which can simulate the full solar spectrum and the destructive light waves that exist in unused environments. Provide corresponding environmental simulations and accelerated testing, specifically used in scientific research, product development and product quality control, etc.
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications | |
| 光源Light source | 水冷型全太阳能光谱长弧氙灯Water-cooled solar spectrum long arc xenon lamp | 风冷长弧氙灯Air cooled long arc xenon lamp |
| 箱内湿度Chamber humidity range | 光循环30%~50%RH、暗循环30%~95%RH(双温控时为50%~90%RH)Light cycle 30%~50%RH; Dark cycle 30%-95%RH; 50%-90%RH at Dual temperature control | |
| 湿度均匀度Humidity uniformity | ≤±5%RH | |
| 箱内温度Chambertemperature | 20℃~80℃，可设定(双温控时，38℃或40℃±3℃)20℃~80℃,Can be setting(38 C or 40 °℃ ±3℃ at Dual Temperature control) | |
| 黑板温度Black panel temperature | 30℃~95℃，可设定(双温控时，65℃或63℃±3℃)30℃~95℃,Can be setting(65℃ or 63 ℃ ±3℃ at Dual Temperature control) | |
| 温度均匀度Temp. uniformity | ≤±3℃ | |
| 滤光片Filter | 窗玻璃滤光片(标配)、日光滤光片、延展紫外线滤光片Window glassfilter/daylightfilter | |
| 辐照强度irradiance strength | 290-800nm波段550-1120W/m²;550~1120W/m2@290-800nm | |
| 控制系统Control system | LCD可程式控制器，自动显示辐照度，可设定100组程序，每个程序含99个循环LCDprogrammable controller,Automatic display Irradiance strength. Can set 100 groups program an each program with 99 cycles | |
| 光照时间Light time | 1~999 Hours, Adjustable | |
| 滤光片Filter | 窗玻璃滤光片(标配)、日光滤光片、延展紫外线滤光片Window glass filter/ daylight filter | |
| 淋雨系统Water spray system | 喷水时间999分钟可调，间断喷水时间1~240分钟可调，可周期循环设定Water spray time 999 minutes settable ,Interval spray time, 1~240 minutes settable | |
| 试样架Sample holder | 转盘式试样架，1-5r/min可调Turntable sample holder, 1~5r/min adjustable | 304不锈钢试样架304 Stainless steel sample holder |
HUD-E818-1 PCT高压老化试验箱 PCT High-pressure Aging Test Chamber
本试验箱(又名饱和高压加速老化试验箱)测试产品在高温、高温高湿及压力的气候环境下的贮存、运输和使用时的性能试验。测试后，通过检定来判断产品的性能是否能够达到要求。
PCT High-pressure Aging Test Chamber tests the performance of products during storage, transportation and use in high-temperature, high-temperature, high-humidity and pressure climate environments.
主要技术参数 Technical Parameters
| 项目Item | |
| 数据Specifications+100℃~+132℃100 % 饱和蒸气湿度Saturated vapor humidity0.5 kg ~3.0 kg / cm2(内桶设计耐压4 kg / cm2 Max withstand a pressure of 4kg)000 Hr~999 Hr | |
| 设定温度Temp.range | |
| 湿度范围Humidity range | |
| 使用压力Pressure range | |
| 时间范围Time range | |
| 加压时间Pressurization time | 0.00 kg~1.04 kg/ cm2 约45 分内Approx within 45 minutes |
| 测试条件Test method | 温度121℃,100%rh饱和蒸气,压力1.04kg/cm²，温度132℃,100%RH饱和蒸气,压力2.00kg/cm²Method A: 1.Temperature 121 °C; 2. 100%RH saturated vapor; 3. Pressure 1.04kg/cm²Method B: 1.Temperature 132°C; 2. 100%RH saturated vapor; 3. Pressure 2.00kg/cm² |
| 试验箱尺寸Inner volume | φ260 cm x L400 mm,圆型试验箱Circular test chamber |
| 控制方式Controller | 17.PLC+HMI |
| 实验用水Experimental water | 纯水Pure water |
| 电源 Power | AC 220V 20A 50/60Hz |
HUD-E818-2高压加速老化试验箱
HAST High pressure Accelerated Aging Test Chamber
本试验箱适用于航空航天产品、信息电子、仪器仪表、材料、电工、电子产品、各种电子元气件的密封性能的检测，使用于产品的设计阶段，用于快速暴露试样在湿热环境下的缺陷和薄弱环节，测试试样的耐厌性、气密性及其各项性能指标。
HAST high pressure accelerated aging test chamber is suitable for testing the sealing performance of aerospace products, information electronics, instrumentation, materials, electrical engineering, electronic products, and various electronic components.
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications |
| 设定温度Temp.Range | +100°C~+140°C(蒸气温度SteamTemp.) |
| 湿度范围Humidity Range | 75~100%(蒸气湿度Steam Humidity) |
| 使用压力Pressure Range | 1.2~2.89kg(含include1atm) |
| 时间范围Time Range | 0 Hr~999 Hr |
| 加压时间Pressurization Time | |
| 温度均匀度Temp.uniformity | |
| 温度显示精度Accuracy of Temp. | |
| 压力波动均匀度Pressure fluctuation uniformity | |
| 电源Power |
HUD-E710-1 滴水试验箱IPX1&X2 Water Drip Test Chamber (IPX1, IPX2)
本产品适用于在运输、贮存或使用期间可能遭受自然降雨、渗漏或冷凝水的电工电子产品的试验方法，考核电工电子产品外壳和遮盖物等密封件在滴试验后能否保证设备和元件良好的试验。
This product is suitable for simulate the natural rainfall, water leakage or condensation test for electrical and electronic products, to check whether the enclosures and covers of samples are in good condition.
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications | |
| 内箱尺寸Internal dimension | 800×800×800mm(W×D×H) | 1000×1000×1000mm(W×D×H) |
| 外箱尺寸Externaldimension | 1300×1000×1700mm(W×D×H) | $1 5 0 0 \times 1 2 0 0 \times 1 8 0 0 m m ( W \times \textcircled { > } \times H )$ |
| 转盘直径Sample turntable | 300mm or 500mm | 500mm or 800mm |
| 转盘转速Rotation speed | 3± 1r/min，高度可调Height Can be Adjusted | |
| 滴水速度Dropping speed | IPX1:1±0.5mm/min,IPX2:3±1mm/min,可调Canbeadjusted | |
| 滴水盘面积Dropping area | 600×600mm | 800×800mm |
| 滴水孔距离样品Distance from drip box to specimen surface | 0.4mm | |
| 滴水孔直径 Water Hole diameter | 20mm | |
| IPX2转盘角度Turntable angle | 可倾斜15°; Can be filted 15 degrees | |
HUD-E710-2 淋雨试验箱IPX3&X4Water Spray Test Chamber (IPX3, IPX4, IPX4K)
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications | ||
| 摆管角度Oscillating angle 喷嘴直径Spray nozzle diameter | 40°、90°、120°、360° 0.4mm(IPX3, IPX4),0.8mm(IPX4K) | ||
| 喷水孔间距 |  | ||
| Distance between two nozzles 转盘速度 | 50mm 1-5r/min | ||
| Turntable rotation speed 转盘直径Turntable diameter | 200mm；300mm;400mm；可定制Car | ||
| 喷水流量Water spray rate | 每个喷嘴:0.07L/min±5%(IPX3&IPX4），0.6L/min±5%（IPX4K) | ||
| 摆管速度 Oscillating speed | Each nozzle:0.07L/min±5%(IPX3&IPX4),0.6L/min±5%(IPX4K) IPX3:一个周期2*120°，约4秒;IPX4:一个周期2*360°，约12秒；IPX4K:约60°/S，可定制 IPX3: 2*120° for 4s, IPX4: 2*350°for 12s, IPX4K for 60° /s, can be adjusted | ||
HUD-E710-3 淋雨试验箱IPX5&X6 Water Shower Test Chamber (IPX5, IPX6, IPX6K)
本产品适用于在运输、贮存或使用期间可能遭受大暴雨、风吹大雨、洒水系统、车轮溅水、冲水或猛烈海浪的电工电子产品的试验方法，考核电工电子产品外壳和遮盖物等密封件在冲水试验后能否保证设备和元件良好的试验。
This product is suitable for simulate the wind and heavy rain, water splashing, flushing, or violent waves test for electrical and electronic products, to check whether the enclosures and covers of samples are in good condition.
| 项目Item | 数据Specifications | ||
| 观察窗Observation window | 防水钢化玻璃Waterproof Tempered Glass | ||
| IP等级IP code | IPX5 | IPX6 | IPX6K |
| 喷水孔内径Internal diameter of nozzle | 6.3mm | 12.5mm | 6.2mm |
| 喷水流量Rate of water flow | 12.5L/min±5% | 100L/min±5% | 75L/min±5% |
| 水压力Water pressure | 30kPa 100kPa 1000kPa | ||
| 测试周期Test time setting | 0~999h59min | ||
| 流量计Flowmeter | 转子流量计/电磁式流量计（可选择）Rotor flowmeter/electromagnetic flowmeter(optional) | ||
| 控制器Controller | PLC触摸屏控制器PLC touch screen | ||
| 喷水孔距离样品Distance from nozzle to enclosure surface | 2.5m~3m | ||
| 水循环系统Water cycling system | 内置水箱回收循环利用Built-in chamber bottom for recycling | ||
| 转盘直径Turntable diameter | 200mm | 300mm | 400mm |
| 转盘速度Rotation speed | 1~5r/min | ||
HUD-E710-4加压浸水试验箱IPX7&X8 Water Immersion Test Chamber(IPX7, IPX8)
本产品适用于在运输、贮存或使用期间可能遭受浸水的电工电子产品的试验方法，考核电工电子产品外壳和遮盖物等密封件在浸水试验后能否保证设备和元件良好的试验。
This product is suitable for simulate the water immersion test for electrical and electronic products, to check whether the enclosures and covers of samples are in good condition.
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications |
| 箱体材质Chamber material | 304不锈钢，厚度3mm; Thickness 304, Thickness 3mm |
| 水压Water pressure | 0~0.5MPa，模拟水下50米;0-0.5MPa, simulate 50 meters underwater |
| 测试周期Test time setting | 0~99min, 99sec |
| 试样提升装置Sample lifting device | 手提式不锈钢吊篮;Portable stainless steel hanging basket |
| 水位显示Waterlevel display | 刻度加水位管; Water pipe with scale |
| 控制器Controller | 数显压力表和计时器; Digital pressure gauge & timer |
| 箱体直径Interior Diameter of chamber | 600mm |
HUD-E710-5 高温高压喷射试验箱IPX9KHigh Temperature & Pressure Water Test Chamber
本产品适用于在运输、贮存或使用期间可能遭受高温高压、蒸汽喷射清洗的电工电子产品的试验方法，考核电工电子产品外壳和遮盖物等密封件在高温高压喷水试验后能否保证设备和元件良好的试验。
This product is suitable for simulate the high temperature and high pressure spraying, Steam jet cleaning test for electrical and electronic products, to check whether the enclosures and covers of samples are in good condition.
主要技术参数Technical Parameters
| 项目Item | |
| 数据Specifications80±5℃ | |
| 水温Spray water temperature | |
| 水压Spray water pressure | 80~100bar (8000~10000kPa) |
| 喷水孔数Spray nozzle no | 4个；4pcs |
| 水流量Rate of water flow | 14~16L/min |
| 喷水距离Spray water distance | 100~150mm,高压热喷射;Highpressure thermaljet |
| 喷水角度和时间Spray water angle | 0°,30°,60°,90°,每个角度喷水30秒;Eachangle spray for 30 seconds |
| 转盘速度Sample rotation speed | 5r/min |
HUD-E801-3 甲醛气候箱 Formaldehyde Test Chamber
本产品适用于各种人造板、复合木质地板以及地毯、地毯衬垫、地毯胶粘剂等室内装修材料甲醛释放量的测定，可用于其它挥发性有害气体的检测。
This machine is suitable for the determination of formaldehyde emission of various man-made panels, composite wood floors, carpets, carpet underlays, carpet adhesives and other indoor decoration materials, and can be used for the detection of other volatile and harmful gases.
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications(1.0±0.02) m³ |
| 箱内容积Inner box volume | |
| 测试舱箱内温度范围Temp.range | 10~40℃，精度:±0.5℃，分辨率0.1℃，连续可调10~40℃, accuracy: ±0.5℃, Resolution: 0.1°℃, continuous and adjustable |
| 箱内相对湿度范围Humid. range | 50±3%RH，分辨率：0.1%，连续可调50 ± 3%RH, Resolution: 0.1%, continuous and adjustable |
| 密封性Tightness | 当有1000pa的过压时，气体泄漏少于1x10×1m³/min，进出口气体流量差<1%Leakage Rate Is Less Than 1*10*1m³/min when pressure up to 1000pa, enter and outer air flow < 1% |
| 苯底浓度Background concentration | 甲醛苯底浓度≤0.006mg/m³; Formaldehyde background concentration is ≤0.006mg/m³ |
| 箱内空气流速Chamber air speed | 0.1-0.3m/s，精度:±0.05m/s,连续可调;0.1~2.0m/s. Precision: ±5%, continuous and adjustable |
| 空气置换率Airreplacementrate | (0.2—2)m³/h，精度:±5%，连续可调(0.2—2) m³/h, precision: ± 5%, continuous and adjustable |
HD-F801-3A 甲醛预处理环境舱 Pre-condition Formaldehyde Test Chamber
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications20～40℃,连续可调 continuous and adjustable≤±0.5℃ 中 |
| 箱内温度范围temp.range | |
| 温度控制精度temp. fluctuation | |
| 密封性Tightness | 在1000Pα压强下，泄漏率少于0.5% |
| 箱内相对湿度范围Humid.range | 40~70% R.H.(at 20-30℃) |
| 空气置换率Airreplacementrate | 0.2~2.0m3/h连续可调continuous and adjustable |
| 空气置换率精度Air flow speed | ≤±0.05次/h |
| 空气流速Air flow speed | 0.1~2.0m/s连续可调continuous and adjustable |
| 额定功率Power | 3kW |
| 苯底浓度Background concentration control | 甲醛formaldehyde≤0.10mg/m³，TVOC≤0.3mg/m³ |
本产品提供一个或多个洁净的封闭空间，能够精确控制仓内的温度、湿度、本底浓度、空气流速、气压、换气次数，模拟在特定环境下产品有害物的释放过程，从而模拟试样在特定环境中污染物的释放指标。
This machine provides one or more clean enclosed spaces, which can accurately control the temperature, humidity, local concentration, air flow rate, air pressure, and the number of air changes in the warehouse to simulate the release process of product harmful substances in a specific environment, thereby simulating samples release index of pollutants in a specific environment.
| 项目Item | 数据Specifications |
| 内箱尺寸Inner size | 1±0.02m³ |
| 外箱尺寸External size | 1500×1800×1800mm(L×D×H) |
| 温度调节范围Temp. adjustrange | +15℃~+60℃ |
| 湿度调节范围Humid.adjust range | 30%~80% RH |
| 空气流速Air flow speed | 0.1m/s~1.0m/s(连续可调, continuous, adjustable),±5% |
| 温度仪表分辨率Temp.meterresolution | 0.1℃ |
| 湿度仪表分辨率Humid.meterresolution | 0.1%RH |
| 温度波动度Temp. fluctuation | ≤0.5℃ |
| 温度均匀度temp.uniformity | ≤1℃ |
| 温度偏差temp. deviation | (-0.5℃, 0.5℃) |
| 湿度偏差Humid.deviation | -2%RH,3%RH |
| 流量计精度Flow-meteraccuracy | 玻璃转子流量计，精度不小于2.5级;glass rotameter, accuracy≥2.5grade |
| 噪音Noise | ≤60dB |
| 电源Power source | 3∮,380V,50Hz |
HUD-E710-6汽车淋雨试验室 Vehicle Rain Test Room
本产品主要用于检测汽车的密封性，通过淋雨试验室，把淋雨检测的条件与外面自然状态相类似，来确认火车、飞机、汽车、电力设备产品及户外运行设备的防止雨水渗透的能力和遭到淋雨时或之后的防雨性能。
淋雨区：采用喷射方式并达到一定的淋雨强度喷射车窗表面,帐篷顶面，同时设有污水处理装置，将循环水进行过滤处理，去除泥砂及杂质，使其达到循环使用水的标准。
The chamber is used to test the water proof performance of trains, airplanes, automobiles, electrical power equipment and outdoor operating equipment under high temp. And pressure water spreying environment.
Spray zone: test method is spraying with high temp. and high pressure to the window and the roof. The chamber had included sewage treatment system for water recycling.
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications |
| 设备功能Equipment function | 用于汽车、农用车等交通工具淋雨实验；Used for rain test of vehicles, agricultural vehicles and other vehicles |
| 淋雨强度Rain intensity | 两侧及顶部为平均20±2mm/min; On both sides and top is an average of 20±2mm/min |
| 电源Power | AC 三相380V ± 5% 50Hz; Three-phase 380V ± 5%, 50Hz |
| 喷嘴喷射压力Nozzle spray pressure | 79-150kPa±10kPa |
| 压力表Pressure gauge | 在水泵的出口处安装压力表，压力：0-0.5MPα(压力采用变频器控制)Install a pressure gauge at the outlet of the water pump, pressure: 0-0.5MPa(pressure is controlled by frequency converter) |
| 流量计Flowmeter | 在水泵的出口调流阀后安装流量计，流量:1-25m³/h;Install a flow meter after the outlet regulating valve of the water pump, flow rate: 1-25m/h |
| 框架外廓尺寸Frame size | 8000×4000×3800mm(L×W×H)，可定制;canbe customized |
| 内框尺寸Inner frame size | 8000×3500×3500mm(L×W×H)，可定制;canbe customized |
| 进出门Get in and out | 采用聚乙烯皮帘门，门洞尺寸2800×3200mm(W×H)，可定制；Use polyethylene curtain door, door size 2800x3200mm (WxH); can be customized |
IP系列 IP Testing
HUD-E706 砂尘试验箱IP5X&6X Dust Test Chamber IP5X&6X
本产品主要适用于检验电工电子产品外壳的防尘性能，亦可检测砂尘侵入对产品的影响。
This product is suitable for simulate the dust Ingress test for electrical and electronic products, to check whether the enclosures and covers of samples are in good condition.
主要技术参数 Technical Parameters
| 项目Item | 数据Specifications | ||
| 内箱尺寸(W×D×H)Internaldimension | 600×600×600mm | 800×800×800mm | 1000×1000×1000mm |
| 外箱尺寸(W×D×H)External dimension | 1100×900×1650mm | 1300×1100×1800mm | $1 5 0 0 \times 1 3 0 0 \times 2 0 0 0 m m$ |
| 灰尘浓度Dust concentration | 浓度为2kg/m³~4kg/m³，测试20次后更换Concentration is 2kg/m3~4kg/m³, should be replaced every 20 times | ||
| 测试尘类型Dust type | 滑石粉 Talcum Powder | ||
| 真空系统Vacuum system | 压力计，空气过滤器，气压调整器，真空泵，连接管Air filter, air regulator, air pressure regulator, connecting pipe | ||
| 真空泵Vacuumpump | 0-30kPa | Pjp17 | |
| 气源压力 Air source pressure | 0.5~0.8MPa |  | |
| 气流速度Air speed | 200kg | ||
| 承重Loading capacity | |||
其他仪器Others
HUD-B618-S 电脑伺服双柱拉力试验仪 Computer Servo Universal Test Machine
HUD-A534 夹抱试验机Clamp Force Test Machine
HUD-H211 电池水洗试验箱Battery WashingTester
HUD-H212 电池挤压针刺试验箱Battery Crush & Nail Penetration Tester
