该页无缩略图
PLASTIC THERMFORMING MACHINE
LQ-3021
Plastic Positive and Negative Thermoforming Machine
Introduction
LQ-3021 positive and negative(in-mould cutting) plastic thermoforming machine, with a new design concept and control system, is suitable for PP, APET, PVC, PLA, BOPS, PS plastic sheet rolls to produce all kinds of high transparent, high tensile turn-up and flat products, such as bowls, dishes, lids, fruit boxes, vegetable boxes, food boxes and plastic trays for wine, medicine, electronics, daily necessities.
Main Features
1.Suitable for PP, APET, PVC, PLA, BOPS, PS.
2.Feeding, forming, cutting, stacking are driven by servo motor.
3.In-mould cutting ensuring consistent and accurate trim.
4.Feeding, forming, in-mould cutting and stacking processing are complete production automatically.
5.Mould with rapid change device,easy maintenance.
6.Working station servo motor adjustment.
7.Double selectable stacking systems.
03 Specifications
| Model | LQ-3021 | |
| Max Forming Area | 540*760mm | |
| Max. Sheet Width | 1000mm | |
| Max Forming Depth | Manipulator: 100mm Downward stacking:120mm | |
| Sheet Thickness Range | 0.2-1.5 mm | |
| Production Speed | 600-1500 cycles/hr | |
| Clamping force | 100Ton | |
| Heating Power | 114 KW | |
| Motor Power | 33 KW | |
| Air Pressure | 0.7Mpa | |
| Air Consumption | 3000 liter/min | |
| Water Consumption | 70 liter/min | |
| Power Supply | 3-phase, AC 380+15V, 50HZ | |
| Sheet Roll Dia | 1000mm | |
| Weight | 9000 Kg | |
| Dimension (mm) | Main MachineFeeder | 6500*2020*2400mm1500*1420*1450mm |
LQ-70/80
Plastic Thermoforming Integrated
Introduction
The LQ-7080 plastic forming integrated machine adopts a new design concept and control system, combinedwith two forming methods of BOPS positive pressure plastic forming integrated machine and positive andnegative pressure plastic forming integrated machine, and can switch working modes with each other. Suitablefor thermoplastic materials such as BOPS, PET, PS, PVC, PLA, etc., to form various high transparent, hightensile flanged and flat edge products;Examples include bowls, plates, lids, fruit trays, mooncake trays, foodtrays, baking trays, supermarket trays, pharmaceutical injection trays, and daily necessities trays.
Main Features
1.Full servo drive system
2.Memory storage system
3.Working mode switching
4.Stacking mode switching
5.Provide intelligent diagnostic analysis
6.Workstation servo motor adjustment
03
Specifications
| Model | LQ-70/80 | |
| Max Forming Area | 700*800mm | |
| Max. Stretch depth | In-mold gripping: 75mm; Out-of-mold stacking:120mm | |
| Sheet Thickness Range | 0.1-1.0mm | |
| Max. Cutting force | 70 Ton | |
| Production Speed | 600-1500 cycles/hr | |
| Heating Power | Area A: 20KW, Area B: 36KW | |
| Motor Power | 22 KW | |
| Air Pressure | 0.7Mpa | |
| Air Consumption | 3000 liter/min | |
| Water Consumption | 50 liter/min | |
| Power Supply | AC 380+15V, 50HZ | |
| Sheet Roll Dia | 1000mm | |
| Weight | 10000kg | |
| Dimension (mm) | Main MachineFeeder | 7670x1705x2830mm1440x1323x1306mm |
LQ-70/95 Full Automatic Thermoforming Machine 6
Main Features
1.Contact heat and cut in place.
2.In-mould cutting ensuring consistent and accurate trim.
3.Servo driven platen for smooth and energy efficient movement.
4.Low energy consumption, high utilization.
5.Stacking equipment available.
6.Robot with 180 degree rotation and dislocation palletizing.
Specifications
| Model | LQ-70/95 |
| Max Forming Area | 700*950mm |
| Max. Stretch depth | 125 mm |
| Cutting line length | OPS:18000mm APET:12000mm |
| Sheet Thickness Range | 0.15-1.0mm |
| Power consumption | 14kw/hr(Approximate) |
| Production Speed | 600-1400 cycles/hr |
| Heating Power | 50KW |
| Motor Power | 12 KW |
| Air Pressure | 0.7Mpa |
| Air Consumption | 2400 liter/min |
| Water Consumption | 15 liter/min |
| Power Supply | AC 380+15V, 50/60HZ |
| Sheet Roll Dia | 1000mm |
| Sheet Roll width | 1000mm |
| Weight | 7000kg |
| Dimension (mm) | 6590x1760x2720mm |
Main Features
1.Contact heat and cut in place.
2.In-mould cutting ensuring consistent and accurate trim.
3.Servo driven platen for smooth and energy efficient movement.
4.Low energy consumption, high utilization.
5.Stacking equipment available.
Robot with 180 degree rotation and dislocation palletizing.
| Model | LQ-70/95 |
| Max Forming Area | 630x780 mm |
| Max. Stretch depth | 125 mm |
| Cutting line length | OPS:13000mm APET:9000mm |
| Sheet Thickness Range | 0.12-1.0mm |
| Power consumption | 10kw/hr(Approximate) |
| Production Speed | 600-1200 cycles/hr |
| Heating Power | 30KW |
| Motor Power | 9 KW |
| Air Pressure | 0.7Mpa |
| Air Consumption | 1500 liter/min |
| Water Consumption | 8 liter/min |
| Power Supply | AC 380V 50/60HZ |
| Sheet Roll Dia | 800mm |
| Sheet Roll width | 810mm |
| Weight | 5200kg |
| Dimension | 5600 x 1750 × 2500mm |
LQ-54/76 Machine Full AutomaticThermoforming
Main Features
1.Contact heat and cut in place.
2.In-mould cutting ensuring consistent and accurate trim.
3.Servo driven platen for smooth and energy efficient movement.
4.Low energy consumption, high utilization.
5.Stacking equipment available.
6.Robot with 180 degree rotation and dislocation palletizing.
Main Features
1.Used for forming BOPS/ HIPS / PS /PVC /PET plastic sheet into various of boxes, dishes, trays, bowls and lids.
2.Combination of mechanical, electrical and pneumatic components, and it combines the material sending,heating, forming and cutting function.
3.The whole system is controlled a micro PLC, which can be operated in man-interface. And has capability reliable, quality jarless, fault few.
4.The sheet transport system and forming are driven by servo motor.
5.Has quickly production capacity, highly utilization ratios of plastic sheet low air consumption and maintenance,beautiful final ready products,so it is a new generation ideal package equipment.
6.Telecommuting and memory reserve functions.
LQ-66/76B
Semi-Automatic Ther
Specifications
| Model | LQ-54/76 | LQ-51/62 |
| Suitable Material | PET /PS /BOPS /H | IPS /PVC/PLA |
| Forming Area | 540x 760 mm | 540x 760 mm |
| Forming Depth | 120 mm | 100 mm |
| Sheet Thickness Range | 0.10-1 | .0 mm |
| Sheet Roll Dia | 710 | mm |
| Air Pressure | 0.7Mpa | |
| Water Consumption | 6 Liters/min(15-20°C) | 5 Liters/min(15-20°C) |
| Air Consumption | 1300 Liters/min | 1000 Liters/min |
| Production Speed | 600-1200 cycles/hr | |
| Voltage | AC 380 V+15 V,50/60 HZ | |
| Heating Power | 30KW | 24 kw |
| Motor Power | 9 KW | 8 KW |
| Clamping Force | 90 Ton | 55 Ton |
| Weight | 4800 kg | 3500 kg |
| Dimension | 5000(L)x1500(W)x2500(H)mm | 2950(L)x1550(W)x2350(H)mm |
02Specifications
| Model | LQ-61/62B | LQ-61/62B |
| Forming Area | 610x620 mm | 660x760 mm |
| Forming Depth | 100 mm | |
| Sheet Thickness Range | 0.10-1.0 mm | |
| Sheet Roll Dia | 710 mm | |
| Air Pressure | 0.7 Mpa | |
| Water Consumption | 5 Liters/min(15-20°C) | 6 Liters/min(15-20°C) |
| Air Consumption | 1100 Liters/min | 1400 Liters/min |
| Production Speed | 600-1200 cycles/hr. | |
| Voltage | 3P, AC 380 V+15 V,50/60 HZ | |
| Heating Power | 21 kw | 27kw |
| Motor Power | 5.0kw | 6.5 kw |
| Weight | 2000 kg | 3000 kg |
| Dimension | 4410x1290x2130 mm | 4850x1500x2130 mm |
1.Used for forming BOPS/ HIPS / PS /PVC /PET plastic sheet into various of boxes, dishes, trays, bowls and lids.
2.Combination of mechanical, electrical and pneumatic components, and it combines the material sending heating, forming and cutting function.
3.The whole system is controlled a micro PLC, which can be operated in man-interface. And has capability reliable, quality jarless, fault few.
4.The sheet transport system and forming are driven by servo motor
5.Has quickly production capacity, highly utilization ratios of plastic sheet, low air consumption and maintenance,beautiful final ready products,so it is a new generation ideal package equipment.
Telecommuting and memory reserve functions.
LQ-61/62B Semi-Automatic Ther
LQ-54/76 Machine Full AutomaticThermoforming
02 Specifications
| Model | LQ-61/62B | LQ-61/62B |
| Forming Area | 610x620 mm | 660x760 mm |
| Forming Depth | 100 mm | |
| Sheet Thickness Range | 0.10-1.0 mm | |
| Sheet Roll Dia | 710 mm | |
| Air Pressure | 0.7 Mpa | |
| Water Consumption | 5 Liters/min(15-20°C) | 6 Liters/min(15-20°C) |
| Air Consumption | 1100 Liters/min | 1400 Liters/min |
| Production Speed | 600-1200 cycles/hr. | |
| Voltage | 3P, AC 380 V+15 V,50/60 HZ | |
| Heating Power | 21 kw | 27kw |
| Motor Power | 5.0kw | 6.5 kw |
| Weight | 2000 kg | 3000 kg |
| Dimension | 4410x1290x2130 mm | 4850x1500x2130 mm |
Usage
This machine is suitable for forming HIPS, PS, PP, PVC, PET plastic sheet into various of containers, boxesdishes, trays, bowls and lids.
Technological Process
Carrying material(cylinder drives the chain to work)--heating(cylinder drives the electric furnace to lift in order tomake a proof)--pulling( cylinder drives the chain)--lifting the lower die, falling the upper die(cylinder drives)vacuum forming(gas drives)---pulling---cutting
03 Specifications
| Model | LQ-720/1220 |
| Max.forming area | 720x1220 mm |
| Max. forming depth | +180/-100 mm |
| Thickness of sheet | 0.15-1.5 mm |
| Power consumption | 18-38kw |
| Vacuum Pump | 100m³/h |
| Production speed | 60-450 (cycles/hr) |
| Power supply | 3P, 380V AC +15V, 50/60HZ |
| Dimension | L8000xW1500xH2500mm |
| Weight | 3000kg |
Single/Douk Layer PP PS
Introduction
1.The main parts, such as screw barrel, screen exchanger,T-die adopt superior alloy steel (38CrMoAlA) withhigh hardness,strong corrosions resistance and long operation life after nitrogen treatment.
2.The screw adopts Big L/D Ratio to ensure the product has good plasticizing, stable extrusion.
3.The Non-stop fast screen changer with double-sieve is controlled by hydraulic unit, which operation is easy and improve the production efficiency.
4.The extruder frame adopts square steel, which ensures the machine works more stable at high speed.
5.The motor and gearbox adopts direct connection, which ensure high output.
Work stable ,easy operation, high performing and cost-effective.
; Plastic Sheet Extruder
Specifications
| Model | LQ-110*33/1050 |
| Raw Material | PP GPPS HIPS PE Calcium Carbonate+PP |
| Efficient Width of Sheet | 920-950mm(Depends on sheet thickness) |
| Thickness of Sheet | 0.3~2mm (Depends on sheet thickness) |
| Maximum Output | ≤200Kg/hr (Depends on sheet thickness) |
| Layer | 1-2 Layer |
| Screw Diameter | 110mm |
| Screw L/D Rate | 33:1 |
| Die-Head Width | 1050mm |
| Motor Power | 55KW |
| Total Power | 120KW |
| Machine Dimension | 12.5m*1.85*2.2m(L*W*H) |
| Weight | 7T |
| Power Supply | 380V 50HZ;3 phase 4 wire |
Hydraulic Cutting Machine 01Specifications
| Cutting force | 40Tons |
| Stroke Adjustment | 10-100mm |
| Distance between pressing board and table | 50-150mm |
| Press Board | 1600x610mm |
| Table Area | 1600x610mm |
| Electrical Supply | AC 380V+15V 50/60HZ |
| Motor Power | 2.2 kw |
| Packing Size | 2340x910x1520mm |
| Weight | 1800Kg |
| Hydraulic oil(46#) | 80Liters |
Screw Air Compressor
01 Specifications
| Max. Sheet Width | 1000mm |
| Max. Sheet Thickness | 0.2-2.0mm |
| Driving Motor Power | 3.7KW |
| Max. Heating Power | 12KW |
| Roller Diameter | 400mm |
| The number of Heating Roller | 2pcs |
| Max. Roller temperature | 170°C,(advice to control in 80-120°C) |
| Max. Sheet Surface temperature | 120-180℃ |
| Dimension(mm) | L1440xW1200xH1900 |
| Weight | 1200kg |
01Specifications
| Max. Sheet Width | 1000mm |
| Max. Sheet Thickness | 0.2-2.0mm |
| Driving Motor Power | 3.7KW |
| Max. Heating Power | 12KW |
| Roller Diameter | 400mm |
| The number of Heating Roller | 2pcs |
| Max. Roller temperature | 170°C,(advice to control in 80-120°C) |
| Max. Sheet Surface temperature | 120-180℃ |
| Dimension(mm) | L1440xW1200xH1900 |
| Weight | 1200kg |
01Specifications
| Main Motor Power (KW) | S7.11/15 |
| Rotational Speed (r.p.m) | 600-900 |
| Feeding Motor Power(KW) | 4/5. |
| Rotational Speed (r.p.m) | 2800 |
| Traction Motor Power(KW) | 0.75/1.5 |
| Rotational Speed (r.p.m) selectable | 20-300 |
| Number of Fixed Blades | 4 |
| Number of Turing Blades | 6 |
| Crushing Chamber Size (mm) | 800*340 |
| Max. Crushing Capacity (kg/h) | 400-600 |
| DB During Crushing | 70-90 |
| Tool material | SKD11/DC53 |
| Screen Aperture (mm) | 8,9,10,12 |
| Conveying Device for Crushing Material | √ |
| Dust Separator | |
| Closure Speak | √ |
| Material Storage Barrel |
SHANGHAI UPG INTERNATIONAL INDUSTRY&TRADE GROUP CO., LTD
ADD:23RD FLOOR MECHANICAL & ELECTRICAL MANSIONNO.600 HENGFENG ROAD,SHANGHAI 200070.P.R.CHINA
Tel:0086-21-6317 3900 0086-21-6353 0603
Fax:0086-21-6353 8343
www.shanghai-upg.com
E-mail:sales@shanghai-upg.com 2026-PLASTIC THERMFORMING MACHINE-V1
