该页无缩略图
MicroPower 15 t The best for micro injection molding
worldofinnovation
PRECISE-EFFICIENT-ECONOMICAL The optimum for all types of micro parts
The advantages
(3) Reliable injection molding technology forshot weights from 0.05 to 4 g
_{rm{\tinycent}}\gg 2-step injection unit with screw plasticizing and plunger injection
(3) Energy-efficient, allelectric“Drive-on-Demand" motor system
_{rm{\tinycent}}\gg Innovative5-point togglelever clamping unit
\gg User-friendly through new Unilog B8 control system with integrated assistance systems
》Compactmachinecelltoaccomodatearotarytable,robot,qualityaccurancesystemandconveyorbelt inside the machine
(3) Matching integratedauxiliaries available(materialdryer,materialloaderand temperaturecontroller)
(3) Easy conversion into a clean room cell by adding a laminar flow unit
》Also as 2-component machine withsecond injection module and an adjusted rotary table available
The machine series
MicroPower standard:1clamping force size-15t MicroPowerMedical:for cleanroom applications-15t MicroPower Combimould:for multi-component injection molding-15 t
MicroPower The system highlights
Clamping unit-all-electric-with optimal access The MicroPower clamping unit is a 2-platen system, in whichtheclampingforcebetweenthenozzleand the toggleleversideistransmitted by a Uframe element. Themovingplatenis drivenby anintegrated,highprecision5-point toggle lever.It moves the mold platen guided withhighprecisiononlinearbearings smoothly and withhigh dynamism.
Plasticizing unit:best control of micro quantities Three injection unit sizes are available for MicroPower machines, with shot volumes ranging from1.2 to 4 \mathsf{cm}^{3} Inallthreeofthese aggregatesplasticizings effected by a 14~\mathsf{mm} 3-zone screw with a 20:1 \angle V D ratio. Injection takes place via a plunger either 5 or8 mm in diameter, with injection pressure of up to3000 bar and with aninjection speed of up to 750~\mathsf{mm/s}
9 Smallplatendrillings-optimalforcetransmission The small through holes of only 26~\mathsf{mm} in both mold platens enable optimal clamping force transmission intothe mold,thusprovidingidealconditionsforhigh precision andlong service lifeof themolds.
Allin-oneproductioncell availableonrequest The MicroPower systemistotally modular.Therefore it canbeextendedintoacompleteproductioncellinside thestandardmachineframeby adding aWITTMANN SCARA robot,arotary table,an optical partsinspectionsystem andaconveyorbelt or glass containerfor finished parts.
Cleanroom-compatiblestandardconcept The standard machine frame is designed for easy cleaning.Withoutanystructuralalterations,itcanbe combinedwithalaminarflowunit,whichsupplies class 7 clean air according to IS014644-1 standard. Hygienicdepositing of thefinishedpartsispossible within the clean room cell strictly according tocavities in an 8-compartment depositing unit with glass containers.
》High precision
The MicroPower clamping unit meets the most stringent requirementsforprecisioninmovementsandautomationoptions.Its highstandardofprecisionisachievedbyguidanceofthesystem platen on the clamping side and themold carrierplateon the samelinearbearings.The centralpositioningof thetogglelever inside the U frame clamping unit ensures symmetrical clamping force transmission into the mold.
》Onemachinesizeasstandard
-The clamping unit is available with 15 t clamping force. Themoldplatensontheejectorsidecomeinoneuniformsize of 240x248~mm as standard. -The width of the fixed platen is 240~\mathsf{mm} ， Themaximumdaylightbetweenplatensis 400~\mathsf{mm}
》Freeaccessandflexibleautomation
Thanks to theUframe,themold space remains free of tie-bars.
Ample space is provided on both sides of the U frame forthe installationofarotarytable（rotationdiameter443or466 mm),a parts handling robot and other auxiliaries for quality inspection and parts depositing.
INJECTION UNIT Specially designed for micro parts
Injectionunitforextremelysmallquantitie The MicroPowerinjection unit is equipped with a two-step plasticizing and injection unit. It is available in three sizes. What all three sizeshaveincommon is their 14\:\mathsf{mm} plasticizing screwfor processing standard-sizegranulates. Theinjectionplunger comesin different sizes.They are available for shot volumes ranging from 1.2 to 4cm^{3} ：
Anti-wear options
》Onesystemfor3shotvolumelevels
TheMicroPowerplasticizing and injection aggregate is a 2-step unit.Step one is plasticizing with controlled back pressure.Step two is a separate plunger injection unit.The plunger of this aggregatefunctions simultaneously as ashut-off device to separate themeltchannel of theplasticizingunitfrom theinjectionunit. Behind the injection plunger, an injection pressure sensor is located,which actively regulates the injection process and thus controls theprecision and consistencyof themoldedparts.
TheadvantagesoftheMicroPowerinjectionunit
Low-stressmetering atlowpressure Systemwithout checkvalve,therefore no damagetomaterials through shearstress
》 FI-FO injection process (first in - first out)
》 Minimal pressure loss during injection
》》 Extremely small meltcushion,consequentlyhightemperature stability of the shot volume
x Shot weights below 50~\mathsf{m g} possible
_{\mathfrak{D}} All standard granulates can be processed.
CLAMPING UNIT-COMBIMOULD SOLUTION Fast rotary unit
The all-electricrotary unit is laid out forrunning in the +1- 180° mode.The rotary table featureshighdynamism,flexibility,operationalsafety andmoldprotectionpackedinto a minimum of space.The robust basic structure provides optimal clamping force transmission.In combination with the backlash-free togglelever,it thus enables extremely energy-efficient operationof the machine.The direct drive situatedbehind therotary table combinesultimate precision with high rotary speed.
》Highlydynamicelectricservodrive
-Short rotary times -Parallel movements possible -Short cycle times
》Shortchangeovertimes
-Optimal accessibility Easy mold insertion and removal
Direct plug-in media connections for pneumatic systems/water
-Media supplyvia covered energychain
》Greatflexibility
-Location ofejectorinbothinjectionstations -Servo-electric ejector control forultimate precision -Useasa2xl-componentmachinealsopossible
x Sensitiveandaccurate
Therotaryplatemovesvirtuallywithoutfriction on its linear bearings. The mold protection system is veryfinely adjustable and thus ensures optimal mold protection.
》Cleanroom-compatibilityasstandard
Smooth surfacefor fast cleaning -Encapsulatedstructure -Stainless steel cover
INJECTION UNIT-COMBIMOULD SOLUTION Designed for molding micro parts
2-component injection molding
A 2-componentmachine alsois available by combining twoinjection aggregates placed next to each other andusing arotary tableinsidethe clampingunit.
(x) Paralleloperation of theinjection unitspossible IntheMicroPowerCombimouldmachine,bothplasti-cizing andinjectionunitscanbeoperatedparallelto each other.This equally applies to the ejectors,core pulls and airvalves,whichcanbe operatedparallel to the clamping movement.
》H-H configuration
Two parallel horizontal aggregates -Both aggregatesmoveableindividually -Effective thermal separation of the aggregates
》Flexible, modular, compact
-Fast changeover between the injection units (PIM,LIM, thermoplastics)
-All standard granulates can be processed.
-Part weights below 50 mg possible
-Easy barrel change
》Ultimate prescision
-2-step screw-and-plunger system -Minimal injection times -Optimal injection pressure control combined with highly dynamic changeover to holding pressure.
MicroPower Production cell "ex works"
The production cell concept is an"ex works"solution for MicroPower injection molding machines.
The advantages of the MicroPower production cell
Machineframeclosedonallsidesasstandard. Thus molding of the micro parts takes place in anisolated environment.
》The enclosed machine cell is designed to provide space for additional equipment modules inside the standard cell.
》The enclosed cellcan be fitted with a clean room module.It consists of a suction filter and a ventilationunitforlaminarairflowthroughthe machine.
》Cost benefits, since all danger areas are covered and certified ex works.
》MicroPowercleanroomproduction cellsare suitable for producing micro parts for medical technology,as wellas the electronics,watch making and optical industries.
》CE mark included for every machine with an insider solution.No separate costs forindividual examinations.
CE-certified by type examination CE
MicroPower
The option highlights
》Rotarytable
Therotary table enables use of 2bottommold halves toachieveshortercycletimesontheonehand,and ontheotherhandtoimplementinsertionandremoval processes.Inthemulti-componentversion,therotary tableservesto accommodatethetwodifferentmold halves.
》Silicone processing inmicro dimensions
Forliquidsiliconeprocessing,forexampleinthe production of medical components,a micro two-component material loaderis available,including a blending andmetering system.With this equipment,the machinecanbequicklyconvertedfromthermoplastics to LIM injection molding.
》High-precision coining（Expert-pvT-Coining)
Fortheproductionofoptical ormicro-structured parts,ahigh-precisioncoining systemis available as an optional equipment package.In this process, the coiningpressure is controlled with high dynamism via theclamping stroke,depending onmold temperature or cavity pressure.
》HiQcontrol forhotrunners
With decreasing partsize,theproportionof spruein the shotvolumeincreases,due to thenatureof the system.Minimizing the proportion of sprue is given a high priority in WITTMANN BATTENFELD product development.
x WITTMANNauxiliariesinmicrodimensions
The optional Wittmann 4.0 auxiliaries integration package is the basis for"Plug & Produce" technology of WITTMANN BATTENFELDinjection molding machines with auxiliary units fromWITTMANN.
WITTMANN auxiliaries specially developed forthe MicroPower:
：TemproplusDMicro100/140/160
-DrymaxMicroF2-15compact ^+ material loader
W8VS2VerticalSCARA
-W8VS4VerticalSCARA
UNILOG B8 Complex matters simplified
The Unilog B8machine control system is the WITTMANN BATTENFELDsolution to facilitate the operation of complex processes forhuman operators.Forthis purpose, theintegratedindustrial PChasbeen equipped with an enlarged intuitivetouchscreen operator terminal.Thevisualizationscreenistheinterfaceto the newWindows10 loT operating system,which offers extensive process controlfunctions.Next to the pivotable monitorscreen,a connected panel/handset ismounted on the machine's central console.
Unilog B8
Highlights
》Operating logic with a high degree of self-explanation, similarto moderncommunicationdevices
》2majoroperating principles -Operating/movementfunctionsviatactilekeys Processfunctions on touch screen (access via RFID, key card or key ring)
_{\mathfrak{D}} Processvisualization via 21.5" touch screen display (full HD), pivoting laterally
》Newscreenfunctions
UniformlayoutforallWITTMANN appliances
Recognition of gestures(wiping and zooming by
finger movements)
Containerfunction-splitscreenforsub-functions
and programs
》Statusvisualization
uniform signaling system across theentire WITTMANN Group.Headline on the screen with colored status bars and pop-up menus
x Operatorassistance Extensivehelplibraryintegrated
WITTMANN4.0 Barrier-free communication
With its communication standardWittmann 4.0,the WITTMANN group offers auniform data transfer platform betweeninjection molding machines and auxiliary equipment from WITTMANN. In case ofanappliancechange,thecorrespondingvisualizationsand settings areloaded automaticallyviaanupdatefunction,following the principle of "Plug & Produce".
ConnectionofauxiliariesviaWittmann4.0
\gg WITTMANNrobotswithR9controlsystem
-Operationof robotsvia the machine'smonitorscreen
-High-speed communicationbetweenmachine androbotto synchronizemovements Importantmachinemovementscanbesetvia theR9robot control system
》WITTMANNTemproplusDtemperaturecontrollers
-Setting and control of temperaturesvia the machine'scontrol system possible
-All functions can be operated either on the unit orvia the machine's control system
Integration in MES system
Theintegration of machines and completeproductioncellsin an MESsystemisa prerequisiteforanefcientand transparent production facility according to the Industry 4.0 concept. Depending on customers'requirements,small and medium-sized companies as well as globalplayers are offered a compact MES solutionbased on TEMI+.With the Windows10loT operating systemit is also possibletohave selected statusinformationfrom all connected machines on theproductionfloorshownunderSmartMonitoring on the display screen of every machine.
Wittmann 4.0system
With Wittmann 4.0,a machine and its robots and auxiliaries aretransformedintoa uniformtechnicalorganism, whichcommunicatesexternallyviaa specificIPaddress. Such a "Single point entry"with an integrated internal firewallsubstantiallyincreases cybersecurity.
"Single point entry" via router into the Industry 4.0 world
APPLICATIONTECHNOLOGY Outstanding competence
》Clean room injection molding
When medical components or electronic parts need tobe manufactured inaparticle-free environment,theMicroPower concept offers excellentconditionswithitseasy-to-clean mold environment and anoptional cleanair supply system.
》Combimould
Two ormore plastic materialsin different colors orwith different attributes can be combined into onepart by upgrading the standard MicroPowerwitha second micro aggregateorbycombining several machines into one production unit.
》Reel-to-reel molding
To produce electronic parts,punched structures arefed through theclamping unit and insert-molded. The ample mold mounting space of the MicroPower offers optimal conditions for this process.
Insertmolding
Whenindividual parts such asplug contacts need to be insert-molded,an insert station on arotarytable outside themoldis available for this purpose. A high-precision SCARA handlingrobot anda metalpartsfeeding stationcanbeintegrated into the machine as additional modules.
》LIM-Liquid Injection Molding
LIM designates the injection molding process formakingelasticpartsfrom2-component liquid silicone rubber(LSR).LIM microparts are usedforopticalandmedicalapplications.
》High-precision microparts
Inadditionto standardplastics processing, the MicroPower injection unit is an ideal choice for manufacturing high-precision parts from engineering plastics such as POM, PEEK or PSU.
》Microstructures
The quality of the plasticmelt generated gently and at a constant temperatureinside the MicroPowerinjection unit isparticularly suited for high-precision reproduction of microstructuresinsidethemold,fromsensor structures toFresnellenses orcopyprotection holograms.
| Clamping unit | MicroPower15 | |
| kN | ||
| Clamping force | 150 | |
| Platen size (h x v) | mm x mm | 240 x 400 (248) |
| Mold height (min.) | mm | 100 |
| Mold height (max.) Opening stroke/Opening force | mm | 300 |
| Maximum daylight | mm/kN | 100/15 |
| Ejectorstroke/ejectorforce | mm mm/kN | 400 |
| Dry cycle timel) | S - mm | 40/3.5 1.2 - 100 |
| Injection unit | 3 7.5 10 | |
| Dosing screw diameter | mm | 14 |
| Dosing screw stroke | mm | 8 20 26 |
| Screw L/D ratio | 20 | |
| Injection plunger diameter | mm | 5 8 8 |
| Theoretical shot volume | cm3 | 1.2 3 4 |
| Specific injection pressure | bar | 3000 2500 2500 |
| Max.screw speed | min? | 200 |
| Max. plasticizing rate (PS)2) | g/s | 1.7 |
| Max.screwtorque | Nm | 90 |
| Nozzle stroke/contact force3) | mm/kN | 230/40 |
| Injection speed | mm/s | 750 |
| Injection rate into air | cm3/s | 15 38 38 |
| Barrelheating power, nozzle incl. | kW | 2.45 |
| Number of heating zones | 5 | |
| Drive | ||
| Electrical power supply | kVA | 9 |
| Emission sound pressure level4) | dB(A) | 65 |
| Weights, dimensions | ||
| Net weight | ||
| Length x width xheight | kg m | 1420 2.1 x 0.98 x 2.1 |
| Max. mol rihter | ||
| Max.mold weight on rotary tables | kg/mm kg | 60/120 35 |
General machine view
MicroPower 15t
TECHNICAL DATA MicroPower 15 Combimould
| Clamping unit | MicroPower15 | |
| Clamping force | kN | 150 |
| Platen size (h x v) | mm xmm | 485 x 400 (248) |
| Mold height (min.) | mm | 100 |
| Mold height (max.) | mm | 300 |
| Opening stroke/Opening force | mm/kN | 100/15 |
| Maximum daylight | mm | 400 |
| Ejectorstroke/ejectorforce | mm/kN | 40/3.5 |
| Dry cycle time1) | S - mm | 1.2 - 100 |
| Injection unit | 3 7.5 10 | |
| Dosing screwdiameter | mm | 14 |
| Dosing screw stroke | mm | 8 20 26 |
| ScrewL/Dratio | 20 | |
| Injection plunger diameter | mm | 5 8 8 |
| Theoreticalshotvolume | cm3 | 1.2 3 4 |
| Specific injection pressure Max.screw speed | bar | 3000 2500 2500 |
| Max. plasticizing rate (PS)2) | min-1 | 200 |
| g/s | 1.2 | |
| Max.screw torque | Nm | 90 |
| Nozzle stroke/contact force3) | mm/kN | 230/40 |
| Injection speed | mm/s | 750 |
| Injection rate into air | cm3/s | 15 38 38 |
| Barrel heating power, nozzle incl. | kW | 2.45 |
| Number of heating zones | 5 | |
| Drive | ||
| Electrical power supply | kVA | 9 |
| Emission sound pressure level4) | dB(A) | 65 |
| Weights,dimensions | ||
| Net weight | kg | 2400 |
| Length x width x height | m | 2.6 x 1.3 ×x 2.2 (2.52) |
| Max. mold wainhter | kg/mm | 80/120 |
| Maxmold weight on rotary tables | kg | 50 |
| Basemachine | Electrics |
| Paint RAL7047 tele grey 4 | Operating voltage 230/400V-3PH,50 Hz |
| Rectangularmainbeamon one-piecebaseframe | Common voltage supply for drive and heat |
| Builtin control cabinet | Separate voltage supply for drive and heat USA/CDN |
| Part transp.on operator side, orparallel tomachine axis | USB-1 xoperating unit |
| Drillingsfor auxiliaryequipment-like robot,camera,etc.-operator sidedonrectangularmainbeam | 1Ethernet interface(switch cabinet) PrinterviaUSB connection or network |
| Clamping unit | Signal lamp at the machine |
| Clamping system:5-point togglewithservo-electricdirect drive | Controlsystem |
| Servo-electricmoldheightadjustment | Control systemUnilogB8-21,5"multi-touch screen(full HD) |
| Clamping andopeningforcesformoldsafetysystemadjustable | Software for operating hours counter |
| Mold safety program with envelope curves monitoring for optimal mold | Closing/opening - 5 profile steps |
| cover | Ejectionforward/back-3profilesteps |
| Preciseplatenparallelism withlow-maintenance movingplaten support | Injection/holdingpressure-10profilesteps |
| Platen drillingsmetrical asperEUROMAP Clamping force displayed on screen | Injection parallel to clamp force build-up |
| Clamping force monitoringincl.displayvia screen | Screwspeed/back pressure-6proflesteps |
| Parts counter with good/badpart evaluation | |
| Servo-electricejector | Purging program |
| Mechanical ejector couple | Stroke zero offset settings |
| Cooling holeinthemoldmounting platen | Start-up program |
| Adjustable injection pressurelimitation | |
| Injection unit Servo-closed loop control | Switchover toholding press.MASTER/SLAVEby injectiontime, screw stroke/injection vol.and injection pressure |
| Increased injectionperformance | Self-teaching temperature controller |
| Screwdrivebyphaseservmotorscrewspeedcontinuouslyadst | Display of temperatureinside electricalcabinet |
| ablevia screen Barrelscrew,distributorblockandinjetionnozzeinhot-worktol | Seven-day timer |
| steel,injectionpistonTINcoated | Access authorizationviaUSBinterface,password system andRFID authorization system |
| Thermocouplefailuremonitor | Freely configurable status bar |
| Plug-in ceramic heater bands | Physical, process-related units |
| Open nozzle | Energy consumption monitoring formotors andheating |
| Quickremovalforinjection nozzle and cylinder | Automatic dimming |
| Hopper of V2A stainless steel canbe shut and emptied | Logbook with filter function |
| Linear bearingsforthe injection unit | User programming system (APS) |
| Selectablebarrel stand-bytemperature | Cycle time analysis |
| Decompressionbefore and/oraftermetering | Energy measurement displayed |
| Physical units -bar, ccm, mm/s etc. | Freely confgurale creenageseae |
| Screwprotection | Notepad function |
| Auxiliaryscrewspeedindication | Hardcopy function |
| Linearinterpolationofholdingpressuresetalues | Internal data storage via USB connection or network |
| Barchartforbarreltemperaturewithsetvalueandactualvaluedisplay | Onlinelanguage selection |
| Selectableinjection pressurelimitation Changeoverfrominjectiontoholdingpressure depending onstroke, | Online selectionofimperialormetricunits Operator manual incl.hydr., mech.and el. schedules online |
| time and pressure | Time monitoring |
| Safetygate | Basic QualityMnitoring (1 frelycongurable network connection, quality table with1000 storage depth,events protocol(logbook)for |
| Maintenance-freesafetygatelockedbyelectromagnet | 1000 events,actual value graphics with 5 curves,1 envelope curves monitoring) |
| SafetygatewithelectricmonitoringaccordingtoCEstandard | |
| Safetygateontherearside | Injection integral supervision |
| Meteringintegral supervision | |
| Cooling and conditioning | Alarm message via Email |
| Watercoolingwithopencooling system Feedingzonewithcontrolledcoolingsystem | SmartEdit -sequence editor |
| Clamping unit | Electrics |
| Servo electric rotary table | Temperature control zone forhotrunner |
| Mechanical mold safetymechanism | Special voltage |
| SPI bolt pattern | |
| Control cabinet cooler | |
| EjectorplatensafetydeviceasperEUROMAP13 | Interface for handling equipment |
| Parts chuteforseparationof good/bad parts | Temperature control interface digital, serial 20mATTY protocol |
| Nickel plated platen in lieu of standard | CAN-Bus-interface for mold conditioner as per EUROMAP 66-2 |
| Airvalve,action initiated (ON)and timerFF） | InterfaceforWITTMANNdryerintegrated |
| Non-standard layout of fastening bores in clamping/nozzle platen | Interface forWITTMANN temperating units integrated |
| Turning-outdevicewithservomotor,installedonejectorplate | Interface for robots as per EUROMAP 67 Interface for robots as per EUROMAP 67 with add. signals for rotary table |
| Injectionunit | Interface for conveyorbelt and dosing unit |
| Grooves inthefeeding zoneof barrel formprovedfeding | InterfaceforfullintegrationofrobotinclEthernetswith |
| High temperature heaterbands up to 450°C | Host computerinterface/PDA(EUROMAP 63) |
| Barrel insulation | Relays contact parallel to plasticizing |
| Enter block with additional connection for nitrogen supply in lieuof | Kistlermoduleforcavitypressuredependent switchover |
| standard | BNC connectors forinjection processanalysis |
| Wear and corrosion resistant injection unit AK+ | Machine fault (potential-free contact) |
| Equipment package for liquid silicone | Part inlay monitoring via vacuum |
| Equipment package for PIM (MIM/CIM) | Signal tower with acustic element |
| EquipmentackaeforhicalastisPCM Equipment package forbioresorbablematerials | CEE socket 16 A |
| Screw in special geometry | Protectionof the socketcircuitsviaresidual-current-operating circuit breaker with30mA conventional tripping current |
| Conversion kit injection unit reduction to size 3 in AK+ | Additional emergency-stop button,mountedontherearof the machine |
| Vacuum package:vacuum pump incl. interface, vacuum valve, vacuum | Interface evacuationwithsoftware(incl.vacuumvalvesforrotarytable) |
| sensor MaterialhopperinDURANglasdesign,0.6 litresinvolume | Interfaceforfreely configurablemoldmonitoring |
| Connecting flangeforcustomer-supplied hopperdrieror drying unit | Controlsystem |
| Equipment packagesavailable in lieuof standard and/orinaddition | Energy consumption analysis |
| Switchovertoholdingpressurebycavityormelt pressure | |
| Safetygate Pneumatic safety gate at the operator side | Switch over to holding pressureby external signal |
| Initiationof thenext cyclebyclosing safetygateinsemi-autooperation | Injection compression and venting sequences |
| Front side safety systemformanualpart removal | Second injection data setting forautomaticstartup |
| HiQ Cushion -melt cushion control | |
| Pneumatic | HiQ Flow - injection integral control |
| Pneumatic maintenance unit incl. pressure regulation | HiQ Melt - monitoring of material quality Injectioncompression program/Extendedinjectioncompressonprogram |
| Pneumatic core pullers incl. pressure regulator | Gate startspecialprogram |
| Additional compressed-air controller | Special program according tocustomerspecification |
| Userspecific limiting input value system | |
| Coolig and conditioning | Program in US dimensions |
| Watercooling withclosedcooling system | RJG eDart interface |
| Hosting of cooling circuits onthe fixed platen of the moving platen | ExpertQualityMonitoring(4freely configurablenetwork connections, |
| Integrated WITTMANN temperating units and dryer | qualitytablewith10000storagedepth,eventsprotocol(logbook)for |
| Cooling circuits 2x additionally without shut-off valve | 10000eventsactualvaluegraphicwith16curves4envelopecurves monitoring,SPCcharts,trend diagrams) |
| Granulat/dryer/feeder | Add. screen text nt according tEU(max. 2languages inaddtoGeman) |
| Integrated WITTMANN dryer/dew point sensor | Second injectionparameterrecordforlowermold allocationorinjection |
| Integrated WITTMANN feeder | parameterchange-over during start-upphase |
| Robot/handling unit | Variotherm processing package |
| W8VS2WITTMANNVertical SCARARobot with3servo axis | Additional euipment |
| W8VS4 WITTMANN Vertical SCARA Robot with 4 servo axis | Special paint and/or touch-up paint |
| Teachbox R8.2/R9 | Tool kit |
| Additional valve | |
| Levelling pads | |
| Additional vacuum circuit (Venturi) | Lighting in mold space |
| Additional vacuum circuit (Venturi withblow-offunction) | Distance blocks 100 mm for leveling mounts |
| 1/0 expansion control cabinet(8l/80) | Spare parts package |
| Interface for COGNEX camera | Sprue-cutoffaliance with air nozzle |
| Adapter for gripper plate (EOAT) with crash sensor | Clean roombox |
| Conveyor belt | Visual qualityinspection |
WITTMANNBATTENFELDGmbH WienerNeustadterStrasse81 2542 Kottingbrunn|Austria Tel.: +43 2252 404-0 info@wittmann-group.com www.wittmann-group.com
