该页无缩略图
43020世界杯奖杯遥控灯光安装教程
Installation Tutorial for 43020 World Cup Trophy Remote Control Light
0
2
③
未安装前请先检测灯饰。
安装时，需要先将积木拼好，再按照灯饰说明书进行操作，替换部分零件即可完成。
由于灯饰全部采用0.3毫米导线，非常细，请勿用力拉扯或多次弯折，安装灯条过程中轻拿轻放。
Please check the lighting before installing it.
When installing,you need to follow the instructions.Replace somepartstocomplete. Since the lighting is made entirely of O.3 mm wire,it is very thin,pleasedon't pullithardorDonotbendmultiple times and gently handle during the installation of the light bar.
灯光材料如下
The lighting materials are as follows
积木拆起
Take the buildingblocks apart
拿出灯线，将第一节灯带安装如下
Take out the light wire and install the first section of the light stripas follows
拿出最长的一节2灯导线
Take out the longest section of the 2-lamp wire
把积木拆起
Take the buildingblocks apart
把2灯灯条安装如下
Install the two light strips as follows
积木安装还原并将导线藏积木内
Reinstall the buildingblocks and hide the wires inside them
拿出剩下的两节2灯灯条
Take out the remaining two sections of the 2-lamp strip
将2灯灯条安装在积木上如图
nstall the two light strips on the building blocks as shown in the picture
将积木转到另一侧,把剩下的2灯灯条安装如下
Turn the building blocks to the other side and install the remaining two light strips as follows
把积木拆起
Take the buildingblocks apart
拿出透明黄配件和灯粒导线安装如下
Take out the transparent yellow accessory and the lamp particle wire and install them as follows
把导线藏于积木内并还原
Hide the wires inside the building blocks and restore them
将积木拆起，把导线穿过积木
Take the building blocks apart and pass the wires through them
还原积木，多余导线藏于积木内
estore the building blocks，with the extra wires hidden inside the blocks
转到另一侧,安装最后一颗灯粒
Turn to the other side and install the last lamp particle
拿出黄色配件和灯粒安装如下
Take out the yellow accessory and the lamp particle and install them as follows
相同方式将导线藏于积木内
Hide the wires inside the building blocks in the same way
积木安装还原
Buildingblock installation restoration
多余导线藏于积木内
The extra wires are hidden inside the buildingblocks
USB接上电池盒【注：电池盒内需自备电池】
Connect the USB to the battery case.[Note: Batteries need to be prepared i1 thebatterycase.]
