Handheld Beveling Machine Series Professional AKF8Pro/AKF15Pro

Product User Manual Product Specification

Dongguan Hang yuan Hardware Tools Co., Ltd.

General Safety Warningfor Electric Tools

Readall warnings and all instructions.Failure to follow the following warnings and instructions willresult in electric shock,fire and/or serious injury. Keep all warnings and instructions for future reference.

In all the following warnings,the term "power tools" refers to power toolsdriven by mains electricity (wired) or battery-powered (wireless).

General Safety Warning for Electric Tools-Worksite

1) Keep the workplace clean and bright.A messy and dark place is likely to cause accidents.

2) Do not operate power tools in explosive environments, such as those with flammable liquids,gases or dust.Sparks generated by power tools may ignite dust or gases. 3)Operate power toolsafter childrenand bystanders have left.Inattentiveness may cause the operator to lose control of the tool.

General Safety Warning for ElectricTools-Electrical Safety

1)The plug of an electric tool must match the socket.It is strictly forbidden to modify the plug in any way. Grounded electric tools cannot use any adapter plug. Unmodified plugs and matching socketswill reduce the risk of electric shock.

2)Avoid contact of the human body with grounded surfaces such as pipes, heat sinks and refrigerators.Contact of the human body with the grounded surface will increase the risk of electric shock.

3)Electric tools must not be exposed to rain or damp environments.Water entering the electric tool will increase the risk of electric shock.

4)Donot overusewires.Do not usewires to move,pull electric tools or unplug their plugs. Keep the wires away from heat sources, oil,sharp edges or moving parts. Damaged or twisted flexible wires will increase the risk of electric shock.

5)When using electric tools outdoors,use external flexible wires suitable for outdoor use.Suitable external flexible wires will reduce the risk of electric shock.

6) If it is inevitable to operate electric tools in a damp environment, usea residual current action protector (RCD).Using an RCD can reduce the risk of electric shock.

General Safety Warming forElectricTools-Personal Safety

1) Stay alert.When operating power tools,focus on the operation you are undertaking and stay clear-headed.Do not operate power tools when you feel tired,or when you are under the influence of drugs,alcohol or treatment reactions.A momentary lapse of attention while operating power tools can lead to serious personal injury.

2) Use personal protective equipment.Always wear goggles.Safety devices,such as dust masks,slip-resistant safety shoes,safety helmets，hearing protection devices,etc.，under appropriate conditions,can reduce personal injury.

3) Do not extend your hands too far.Always pay attention to your footingand body balance.This will enable you to control the power tools well in case of an unexpected situation.

4) Prevent accidental start-up. Ensure that the switch is in the off position when connecting the power supply and/or battery box, when pickingup or transporting the tool,and when fingers are placed on the switch that has been connected to the power supply or when the switch is in the plug-in position.Placing fingers on the switch that has been connected to the power supply or when the switch is in the plug-in position may lead to danger.

5) Before the electric tool is connected,remove all adjustment keys orwrenches.Keys or wrenches left on the rotating parts of the electric tool may cause personal injury.

6)Dress appropriately.Do not wear loose clothes orwear accessories.Keepclothes,glovesand hairaway frommovingparts. Loose clothes,accessories and long hair may get caught in the moving parts.

7)If devices for connecting to the chip removal and dust collection equipment are provided,ensure that they are properly connected and used. Using these devices may reduce the danger caused by dust.

Safety Precautions for Electric Tools Usage

1) Do not abuse electric tools. Use the appropriate electric tools for the purpose.Choosing electric tools with proper design will make your work more effective and safer.

2) If the switch cannot be turned on or off to cut off the power supply of the tool,do not use the electric tool. Electric tools that cannot be controlled by the switch are dangerous and must be repaired.

3) Before making any adjustments,replacing attachments or storing the electric tool,you must unplug the plug from the power source and/or disconnect the tool from the battery box.This protective measure will reduce the risk of accidental start-up of the tool.

4)Store the idle electric tools out of the reach of children and do not allow people who are not familiar with the electric tool or do not understand these instructions to operate the electric tool.Electric tools in the hands of untrained users are dangerous.

5) Maintain the electric tool.Check whether the moving parts areadjusted properly orstuck,andcheck fordamage to the parts and other conditions that affect the operation of the electric tool. If there is damage,the electric tool should be repaired before use.Many accidents are caused by poorly maintained electric tools.

6)Keep the cutting tools sharp and clean.Well-maintained tools with sharp cutting edges are less likely to get stuck and easier to control.

7)Use the electric tool,attachments and the tool head according to the usage instructions,considering the working conditions and the operations being performed.Using the electric tool for operations that do not match the purpose may lead to danger.

General SafetyWarningfor ElectricTools-Maintenance

Have your electric tools sent to professional repairmen for maintenance.Use the same spare parts for the repair. This will ensure the safety of the repaired electric tools.

Supplementary Safety Rules for Beveling Machines Rebound and related warnings

1)Keep the electric tools firmly held.Especially when the machine starts,make sure to hold the body steadily to prevent it from vibrating back and forth.

2) Keep your hands away from the rotating parts. 3) Please install the chamfering tool bits before using. 4) Secure the workpiece. Use a fixing device or a vice to fix the workpiece.It will be more stable than holding it by hand. Do not use the beveling machine to clamp it on the vise or fixture.Do not use it while the rotating part is in motion. Keep your face or hands away from the rotating parts.

5)Do not process materials containingasbestos.Asbestos may cause cancer.

6)The edges and fragments of the workpiece are very sharp. Please wear protective equipment.Depending on the applicable situation，usea face mask,safety gogglesor safetyglasses.Whenapplicable,wearadustmask,hearing protection,gloves and a work apron that can protectagainst workpiece fragments.

7)Keep bystandersata safe distance from theworkingarea. Anyone entering the working area must wear protective equipment.

8)The workplace must be kept clean.Different types of work dust,when mixed,are prone to chemical reactions and are very dangerous.Metal dust is prone to catching fire or causing an explosion.

9)Do not let the tool run without anyone present.Only operate when holding the tool in hand.Do not place the rotating machine on the ground or workbench until the beveling machine is completely stationary.

10)Do not place the beveling machine on the workpiece fragments.Otherwise,it may cause damage to the tool or malfunction.

11）Please avoid having the rotating _parts of the machine touch the power cord.This may lead to a serious electric shock accident.Do not use the beveling machine with damaged power cords.If the power cord is damaged during operation,do not touch the damaged wire and immediately pull out the plug.Damaged wires will increase the risk of electric shock for the user.

12) Make sure to stand firmly.Do not have anyone under the work area when workingat heights.

13)Do not touch the blade immediately after the operation. Because they may be extremely hot and cause burns to the skin.

14) If the machine falls or collides accidentally,please check if the blade and the machine are damaged,cracked or deformed.

15) If using an extension cable,please use a double-insulatedcablewiththesamespecificationsasthistool.

16)Regularly clean the ventilation ports of the beveling machine.The motor fan will suck in dust into the casing. Excessive deposition of metal powder can lead to electrical hazards.

17)Do not use accessories that require coolant.Using water orother coolants may cause electrochemical corrosion or electric shock.

18) Do not stand where the tool will move whenit rebounds. The rebound will drive the tool to move in the opposite direction of the cutting motion at the winding point.

Therebound is a sudden reactive force resulting from the installation parts being jammed or tangled during rotation. Jamming or tangling can cause the rotating installation parts to suddenly stop rotating rapidly, thereby causing the out-of-control power tool to move in the opposite direction of the installation parts'rotation at the jam point.

If the chamfering cutter blade is tangled or jammed by the workpiece,the edge of the chamfering cutter blade that penetrates the workpiece may slide open or rebound due to the jamming. At this time, the cutter holder of the chamfering cutter blade may fly towards or away from the operator,depending on the direction of movement of the cutter holder at the jam point.Additionally, the chamfering cutter blade may also break.

Therebound isa result of improper use of the power tool or improper operation.It can be avoided by taking the following appropriate preventive measures.

1) Grasp the power tool firmly and keep your body and arms in the correct posture to resist the rebound force.If appropriate preventive measures are taken,the operator can control the momentary torque and rebound force.

2)Be extra careful when working at sharp corners,sharp edges，etc.Avoid the bouncing and entanglement of attachments.Sharp corners,sharp edges and bouncing have the tendency to entangle rotating attachments and cause uncontrollable rebound.

3)The direction inwhich the installation piece is pushed into the workpiece must always be consistent,that is,to make the next cut in the direction when the blade leaves the workpiece (equivalent to the directionin which the waste is thrown out).If the cutting direction of the power tool is incorrect,the blade of the installationpiecewill slip off the workpiece and the power tool will be pulled towards the direction of advancement.

4)Avoid blocking the bevel blade or applying too much downward pressure.The height of the bevel edge must not exceed the maximum allowablevalue.Overloaded bevel blades are prone to tilt or get blocked under excessive pressure,thereby causing rebound or cracking of the bevel blade.

5)Avoid getting close to the front or rear of the rotating bevel blade.When you remove the bevelblade from the workpiece,it may cause rebound and the power tool,along withthe rotating bevel blade,may directly throwtowards you.

6)Turn or replace the dull or peeling coating bevel blades in time.Dull bevel blades increase the risk of the machine getting stuck and damaged.

7)Do not use the power toolwithouta guide plate

Marking

To minimize the damage，users should carefully read the instruction manual.

4

Please wear protective glasses.

Warning sign

Before carrying out any debugging or maintenance workon themachine,please be sure to unplug the power plug first.

Function indication of the beveling machine

Figure A

Some of the accessories mentioned in the illustrations or text are not included in the scope of supply.

The main functions and key parameters of the beveling machine

This productisa handheld boost-typecurved beveling machinepowered byaunique mechanical boostdesignanda brushlesspermanentmagnetmotor.WhenequippedwithAOCKEoriginalacessries,itcanboperatedbytrainedpersonnel in professional fields in a work environment that is protected from rain and wind:

-Process workpieces mdeoftl,castteel,fine-grainedstl,stainlesstee,aluminum,lumnumalloysd )lastic.

- Used in industrialand craft fields for profit-making purposes.
- Perform pre-processing operations for K-,V-,X-,and Y-type welding grooves.
- Millflanges on equipment,tools,and machines.
-Be used for rounding edges to optimize pre-preparation for painting or serve as anti-collsion equipment.

Machine specifications

1.Regarding regularoiling，for maintaining stable and smooth adjustment operations,regular oiling is required at the indicated locations.

2.Regarding regular cleaning,in order to fully exert the performance，regular cleaning of iron filings and residues is necessary. Excessive accumulation of iron filings can cause the tool to overheat, resulting in wear,insufficient power,and performance degradation, significantlyaffecting the tool's lifespan.

Note:The machine does not include the guide wheel assembly and the cutter head assembly.Corresponding combinations can be selected according to different processing requirements. For details,please refer to Page 6 "Specifications of Cutter Head Assemblyand Guide Wheel Assembly".

A、Cutterassembly

selectable 30°/37.5°/45°/60°

B、Right Angle blade

selectable Steel/copper/aluminum/ Hardsteel/stainlesssteel

C、Circularblade

selectable R2/R3/R4/R5

D、Guide wheel set

Accordingto the chamfer Angle,RAngle size Selectthe appropriate guidewheel See "Guide Wheel Setand Cutter Set Specifications"on page 6.

Operation Instructions

First,start the power tools,then place the tools against the workpiece. Otherwise,the workpiece and the mounting parts will be damaged.During the processing,the guide wheel mustalways bein contact with the workpiece.

First,remove the still-running bevelingmachine from the workpiece,and then shut down the machine. Otherwise, the workpiece and the mounting parts will be damaged. If the beveling machine shows obvious vibration,please 八 check the settings parameters for each processing material and the condition of the installation components.

warn

Thereisarisk of being cut bydebris.Your hands, clothes,etc.mustalwaysbe keptawayfrom the debris.if the installation partsarestill rotating,please stop the machine first.

warn

There is a risk of being cut by the sharp blade on the milling head.Please do not touch the sharp blade on the milling head.

warn

There is a risk of being burned.The mounting piece will get hot during use. Cool down the mounting piece:

After putting away the power tools -Before changing the tools

If necessary,turn or flip the chamfer blade that can be used 8 times.Note that the cutter head, guide wheel set,and chamfered blade may vary due to different uses.Therefore,you can only use the license attachment for the specific purpose.

For bevel and radius machining，please set the correct speed level according to the material.

Because combustion,plasma or laser cutting,can harden the edges of different materials.The reference values provided may therefore vary widely.

Adjust the height of the bevel (refer to page 16/17)

Use a beveled -chamfered blade,which is available for purchase as an accessory.Adjust the hypotenuse height "a" through the set scale on the guide plate.Makea sample first.Since the scale hasa tolerance of about ± 1 ~ \mathsf {mm } (about 1/32 inch),additional adjustments may be required.Additional adjustments can be made with the help of a second scale (scale1 to 15) on the guide plate.For each scale adjustment,the guide plate can be moved by 0 . 1 { \mathsf {mm } } (1/254 inch).

Set radius dimensions (refer to page 17/18)

Use an arc-chamfer blade,which isavailable for purchase as an accessory. The scale on the guide plate must be adjusted according to the individual radius.The values for setting the dimensions can be found in the response attachment.

Care and maintenance

In some extreme use cases (such as processing metal materials),it is possible to storea large number of guides inside the machine

Electrical waste dust, thus affecting the insulation function of the machine.So use dry often.Oil-free compressed air is used to clean the inner chamber of the power tool through the vent and to connect the current protection switch (Fl).

If necessary,clean and lubricate the height adjustment screw on theguide plate.Unscrew the guide plate and remove the guide plate bracket. Clean and oil both sides of the screw.

Products that have been in contact with asbestos are not allowed tobe sent for repair. Please handle asbestos-contaminated products in accordance with local regulations on the disposal of asbestos-containing waste.

Note: Be sure to turn off the power switch and unplug the machine before maintenance or service.Do not use gasoline,benzene, thinner,alcohol or similar items to clean the tool.Otherwise, the tool may be discolored,deformed,or cracked.

Beveling machine before use or daily inspection includesat least the following items:

a) The tool user must have full-time personnel to conduct regular inspections.

b) Check whether the screws are fastened.

c) Whether the shell and handle are cracked or damaged.

d) Whether the power cord and power plug are intact.

e) Whether the power switch is normal and flexible,and whether there is defect or rupture.

f)Whether the rotating part of the output shaft rotates flexibly, lightly and without blocking phenomenon.

g) Check whether the guide wheel is damaged or loose.

n) Check whether the chamfer blade is damaged or blunted.

i) The workpiece surfaceis notsmooth,easy to impact,damage the blade,operation chamfer to avoid impact.

j) The machine advances too fast or the amount of a single milling is too large,resulting in poor milling quality,damage to the blade and the motor.

Select Annex (reference page 19)

Only the original AOCKE accessories can be used,and the accessories are for the power tool model.

A Cutter group B Right Angle blade C Arc Angle blade D Guide wheel group

Warranty Policy

Dear User,

Wesincerelyappreciate yourpurchaseof the AOCKEOujianProfessional Handheld Grooving Machine.Toensure youreceive high-quality after-sales service,please pay close attention to the following matters:

1.The AOCKEOujian Profesional Handheld Grooving Machine hasundergone strict inspection before leaving thefactory. 2.The warranty guarantee onlyappliesto consumers who purchase genuine AOCKE Oujian@ Profesional Handheld Grooving Machines.
3.Undernormalusage conditions,the AOCKEOujian@ ProfessionalHandheld Grooving Machineis guaranteedforawarranty period of 12 months from the purchase date.
4.To ensure you can enjoythewarrantyservice,please promptlyfillout the warrantycardand send the return slip within2 weeks bytakingphotosormailingittotheAOCKEauthorizedafter-salesservicecenter.Wehighlyvalueandappreciateyour valuable opinions.
5.For warranty-related matters,pleasecontact your nearbydesignated dealerorafter-salesservicecenterdirectly. 6.When applying for warranty service,please bring the following materials and items:
6.1 Providethecomplete productand ensure thelabelsare intact,with serialnumbersand batch numbersidentifiable; 6.2 Attach the purchase voucher (invoice receipt,etc.);
6.3Warranty card and warranty record sheet.
7.The following situations are not covered by the warranty:
8.1 The machine is misused or abused;
8.2The machine is severely overloaded;
8.3Theproductisdamagedbyexternalobjects,foreignsubstances (sandgrainsorironfilings),oracidentalacidents; 8.4 Any product that has been opened,repaired,replaced parts,or modified by the user;
8.5 Damage to the product caused by improper transportation or storage after sale;
8.6 Damage to the product caused byimproperuseof AOCKE Oujianoriginalpartsand accessriesasperregulations; 8.7 Replacement of gears,power cords,switches,bearings,etc.,that are prone to wearand tear;
8.8 Useofthe machine beyonditsdesigned functionbytheuserorprolongedand intense useof tools,motorsoverheating, rotor or stator burning,which cannot be regarded as covered by the warranty.
8.Duetocontinuousimprovementandupgradingoftheproduct,ifthereareinconsistenciesinappearanceandparameters,the physical product shall prevail.

AOKEAfter-salesService Center

Address:No.308,Feng Shen Avenue,Yan Tian Village，Feng Gang Town，Dongguan City, Guangdong Province
Telephone:0769-82083030

Product Warranty Card

Toensure that your toolcan enjoythefree warrantyservice,pleasefillin thefollowing formand returnit.

User Name: Madam/Sir Contact Information:
Unit Name:
Industry sectorPattern mold Machining valve flange shipbuilding Home decoration Sheet metal High-speed rail trackother steelstructure

Greater emphasis on performanceCutting efficiency Cutting size Surface finish of cutting

Dealer Name:

Signature or Seal:

Ojion Portable Boosting Beveling Machine AKF8Pro I AKF15Pr0