该页无缩略图
LESSO
DUONG ONG CO SO NONG NGHIEP HIEN DAI
·Ong dung cho nong nghiep·Tuéi tiet kiem nuéc Duong Ong trong trot cd s?·He thong long nuoi bien
Nang cap nong nghiep va chan hung nong thon
Nong nghiep LEsso/Lien ket nang cap nong nghiep voi mang lu?i duong ong nham thuc day su phat trien ben vung cua cac vung nong thon xinh dep
Muc luc
| Các loai ong nong nghiep | Ong nong nghiep chuyen dung (khong chiu ap) PVC-U Ong cap nuc nuoi trong PVC-U | 08 60 11 | |
| Ong gieng chuyen dung PVC-U | |||
| Ong chuyen dung dung de phun thuoc vuon cay an qua PVC-U -- Ong nuc nong nghiep PE | 13 | ||
| Ong nhua lu?i trong suot PVC-U | 14 | ||
| Ong nu?c vuon hoa PVC-U | 18 21 | ||
| San pham tuoi | Cac loaitu?inhogiot | ||
| tiet kiem nuoc | Bang tu?inhogiot dang mieng dugctich hop bentrongva cac phy kien - | 24 | |
| Ong tuoi nho giot bu ap tich hop trong va cac phu kien | 27 | ||
| Ong LDPE va phu kien tuoitieu | 29 | ||
| Cac loai dau noisongPPdung cho tu?i tieu | 32 | ||
| San pham duong | |||
| ong nong nghiep | |||
| cd s | Mang trong trot chat nen va phu kien | 37 | |
| Mang trong trot soduavaphy kien | 39 | ||
| Mang trong trot dang tam va phu kien | 41 | ||
| Cac loai ongthuy canhPVC-U danh cho nongnghiepco sd | |||
| Ong trong trot va phu kien dong m8 vuong PVC-U | 43 | ||
| Ong trong trot va phu kien vuong PVC-U | 45 | ||
| Ong trong trot va phu kien vuong R trong PVC-U Ong trong trot va phu kien vuong R ngoai PVC-U | 47 47 | ||
| He thong long | Gidi thieu ve He thong long nuoi trong bien Lesso | ||
| nuoi bien Mot so du án | Du an trong nuc | Du an nuoc ngoai | 51 54 58 |
GIOI THIEUVE TAPDOAN
Congty TNHH Tap doan Lesso Holding Trung Quoc (Viet tat: Lesso Trung Quoc, ma co phieu: 02128.HK) la tap doan cong nghiep vat lieu xay dung va ngithat gia dinh quy mo lonTrung Quoc.oat dong kinh doanhbaogom duong ng,vat lieu xay dungnithatgia dinh,baovemitruong,nang lung mdi,nen tangdichvuchuicungng va cac linh vyc khac.Cac san pham lienquan den cac linh vucduong ong, nang lugng miquang dien, nuc nong phong täm, nha beptong the, cia ra vao va cia so tong the,vatliutamkhuon nhomvakhungleo thongminh,thietbilocnucsach,chongthamvabitkeo,thietbiphongchaychachay,van,daydiencapdin,denchieusng, vat lieuve sinh,baovemitruong,thiet binong nghiep,long nuitrong thuy san bienva cac linhvuckhac.Nam 2022,thunhaphoat dong kinh doanh cuatapdoandat 30,767tyNhandante.
Cung voisu thuc day cua quoc te hoa va toan cau h6a,Lesso Trung Quoc da thanh lap hon 30 cd sd san xuat tien tien, phan b6 tai 18 tinh tren khap ca nu8c va nu?c ngoai. Lesso Trung Quoc tiep tuc cai thien bo cuc chien ludc, md rong mang luoi ban hang va khong gian thi truong, dong thdi c6 the cung cap san pham va dich vu cho khach hangmotcachkipthdivahieuqua.
Lesso Trung Quoc c6 vien nghien ciu tap doan voi hon 1.ooo nha nghien ciu khoa hoc thuoc nhieu loai hinh. Tap doan hien c6 32 doanh nghiep cong nghe cao quoc gia, 1 trungtam cong nghe doanh nghiep dugc cong nhan tren toanquoc,2 tram cong tac nghien cuusau tien siva6 phong thinghiem CNAs dudccong nhan trentoan quoc, 1 phong thi nghiem trong diem tinhQuangDong cuacac doanh nghiep cong nghe ducva che bien nhuava1 Lien minh doi mdicong nghe cong nghiep ong nhua tinhQuang Dong.Hiennay,LessoTrungQucdangsdhtuvadangdängkyhon2.9obangsangche.ThanhtyunghiencuukhoahocdädugcluachonvaoDuanKehoachNgonduc Quocgia,San pham moi trong diem quoc gia,Du an thuc daythanh tyu khoa hoc va cong nghe quocgia cua nganh xay dung va Danh sach mua sam xanh cua Chinh phu; Tap doan da dudc caccd quan quocgia co lien quan trao tang danh hieu quanquan doanh nghiepkieumau duy nhat trong nganh san xuat, doanh nghiep kieu mau sohdu trituequocgia, doanh nghiepco loithe doimidoclap trong khoahocva cong nghe xay dung cuaTrung Quocva cd sa kieumaucong nghiep h6acua Boxay dung, v.v; TapdoandgianhgiainhatGiaithuongTienbKhoahocvaCongnghecuaLiendoanCongnghiepnheTrungQuoc,GiaithungTinbKhoahocvaCongnghecuaB Giao duc,giainhatGiaithuong Tien bo Khoahocva Cong nghecuatinhQuang Dong,giainhat Giaithung Sangche Cong nghe cuaKhoahocQuang DongvaGiaithung Cong nghe, Giaithuong Xuat sac cua Giai thuong Bang sang che Trung Quoc, Giaithuong Chat luong cuia Chinh quyentinh Quang Dong, v.v.
giaidoan nay,Lesso Trung Quocco hon10.000 san pham va la nha san xuat c6he thng san pham hoanchinh trong linhvucvat lieu xay dungva trang trinoithatgia dinh tai Trung Quoc.San pham cua LessoTrung Quc dugc si dung rong raitrong trang tri nha cua, xaydung dandung,cap nuc do thi,thoat nuc, quanly nang lung. truyen thong dien, khi dot, phong chay chta chay, bao ve moi truong, nong nghiep, nuoitrong thuy san bien va cac linh vyc khac.
Trong tuong lai, Lesso Trung Quoc se tiep tuc duy tri khau hieu thuong hieu"Cainhin ve tuong laituoidep"va thuc hien loihua thuong hiu"Ben vung cho khong gian khoe dep", cung cäp khong gian song va xay dung do thitot hon cho moingudi,taora mot thanh ph lytuong xanh, dang song va hieu qua,thu thap tritue chung cua toan xa hoi, dong thoi de “khong gian khoe dep"lan toa trong thanh pho va ben vung trong cuoc song.
30,767t nandente Thu nhap hoat dong kinh doanh nam2022
10000+ Chung loai san pham
30+ Cd sd san xuat
2220 muc San pham dugc cap bang sang che
Thiet bi san xuat
Thiet bi khoan lo chuyen dung danh cho ong thuy canh
0 So do canh xuong san xuat ép phun
0 Day chuyen san xuat ép dun Mang chat nen
Thiet bi kiem tra chat luong
⊚ Giy chung nhan He thong quan ly do luong (AAA)
⊚ Thiet bi phat hien cac loai san pham tu?i nho giot
⊚ May kiem tra va dap tha rdi
⊚ May phan tich muoi than
⊚ May do nhiet luong quet vi sai
● May thi nghiem do cung dieu khien vi mo
⊚ May thi nghiem ngam Dioxymethane
Trinh do chuyen mon
⊚ Cong nghiep hoa cong nghe ong nhua mdicua Bo xay dung, chung nhan co sokieu mau
⊚ Trung tam cong nghe doanh nghiep dudc nha nu?c cong nhan
⊚ Giay chung nhan san pham du tieu chuan on dinh kiem tra chat luong quoc gia
⊚ Tram lam viecchuyengia khoa hocva cong nghe tinh Quang Dong
⊚ Doanh nghiep co the manh ve cong nghe duong ong
⊚ Tieu chuan hoa ong nhua, giay chung nhan co thanh tich xuat sac trong cong tac
⊚ Thuong hieu hang dau trong nganh duong ong va duong ong vaonam2022
⊚ Chung nhan tram lam viec sau tien si
Bang sang che san pham
Bangsangche quocte PCT
⊚ Thiet biphäantuloccua bo locxep chong PCT/CN2010/071035
⊚ Thiet bidan dong dau phunnuocngam kieu nanghaco do dinh PCT/CN2010070211
⊚ Thietbidandong dau phunnuocngam kieunanghacodo dinh PCT/CN2010070207
Bangsangche
⊚ Thiet bidan dongdau phunnuocngam kieunanghaco do dinh 200910214545.1
⊚ Thiet bidan dong dau phun nuocngam kieu nangha 200910214546.6
⊚ Cocautruyendongmayphunnucvacacmayphunnu?csidungcdchetruyendongnay201010562475.1
Cocautruyendongmayphunnucvacacmayphunnu?csidungcdchetruyendongnay 201020629032.5
Thietbiphantuloccuabolocxepchong 201010115864.X
Cdcauxoaychodauphunvadau phunkhongtaylacsuidungcdchexoaynay 201010551218.8
Boloclytam 201010551114.7
Van xanuoc 201010122946.7
Dauphuntuoinuoc 201010260180.9
Boloccatxilanhnhua 201120078841.6
Dau phuntaylacngam 201010553125.9
Däuphunxoayngam 201010260195.5
O
O Phuongphapép phunthanh hinh cua maytach nu?cbangnhua 201010527657.5
O Cautao sungnuoc 201010260198.9
⊚ May phun nuc 201010557278.0
⊚ Thietbitruyendonggiamtocthuylucvavoiphunngamkieunanghasidungthietbinay201110209287.5
⊚ Maytach nu?c dacongnang 201110213744.8
Hethongtydongthong bao cho ngudidungve suyco duongong 201110209288.X
Bangsangche mo hinh moithucdung
⊚ Dau phuntudinuoc
⊚ Dau phunxoayhoantoantuy dong360 do
⊚ Dau phuntaylac ngam
⊚ Voixoaytaylaccong ra don
⊚ Sung phun nhua
⊚ Voixoaytaylacnhieu congra
⊚ Dau noinhanhvoiduongkinh khacnhau pho bien linh hoat
⊚ Maytachnuocdacongnang
⊚ Voiphuncothedieu chinh huong
⊚ Dau phun mdiva dau phunsudung dau phun nay
⊚ Maybom nu?ctang aphen giokieucamtay
⊚ Sungphun nhuacothe dieuchinh
| Ten san pham | Quy cach (mm) | Ddaythanh(mm) | Ten san pham | Quy cach(mm) | Ddaythanh(mm) |
| 50 | 1.8 | 50 | 1.8 | ||
| 2.0 | 2.0 | ||||
| 63 75 | 2.0 | 63 | 2.0 | ||
| 1.8 | 75 | 1.8 | |||
| 2.0 | 2.0 | ||||
| 2.3 | 2.3 | ||||
| 2.5 2.0 | 06 | 2.5 2.0 | |||
| 06 | 2.2 | ||||
| 2.2 2.8 | 2.8 | ||||
| 2.0 | 2.0 | ||||
| Ong nong nghiep chuyen dung PVC-U (ng thang) | 110 | Ong nong nghiep chuyen dung PVC-U (6ng loe) | 110 | ||
| 2.5 | 2.5 | ||||
| 2.8 | 2.8 | ||||
| 3.2 | 3.2 | ||||
| 160 | 3.0 | 160 | 3.0 | ||
| 3.5 | 3.5 | ||||
| 4.0 | 4.0 | ||||
| 5.0 | 5.0 | ||||
| 200 | 3.5 | 200 | 3.5 | ||
| 4.0 | 4.0 | ||||
| 4.5 | 4.5 | ||||
| 5.0 | 5.0 | ||||
| 250 | 5.0 | 250 | 5.0 | ||
| 6.0 | 6.0 | ||||
| 315 | 7.7 | 7.7 |
Ghichu: · Ong nong nghiep chuyen dung PVC-U (ong loe) co mau trang. (Mau xam va cac mau khac c6 the dudc tuy chinh)
Quy cach phu kien ong
Tieu chuan thyc hien san pham
Gioi thieu san pham
Ong cap nuc nuoi trong nong nghiep PVC-U duoc ép dun nong chay tul nguyen lieu cong thuc dac biet PVC-U khong chi chat luong cao.San pham co hai loai: ong thang va ong thang m? rong, co nhieu uu diem nhu trong luong nhe, do cuing tot, chong an mon, chong lao hoa, ket noi nhanh. Mau sac cua san pham la mau xanh nhat, chu yeu dung trong thi truong cäp nu?c ap suat thap cho nganh nuoi duong thuy hai san va nuoi trong nong nghiep.
Nhan biet san pham
·Vat lieu PVC-U khong chi chat luong cao, khong dochai, hop ve sinh,thanthien vi moi trung, khong dong can, khong san sinh vi khuan.
·Kha nang khang axit, khang kiem va chong an mon tuyet voi.
·Trong luong nhe, de van chuyen va tai trong, thi cong don gian.
·Tuoi thodai.
Kichcosanpham
| Mucapsuat MPa | Duongkinh ngoai danh nghia (mm) | Daythanh (mm) | Mucapsuat MPa | Duongkinh ngoai danh nghia (mm) | Daythanh (mm) | Mucapsuat MPa | Duong kinh ngoai danh nghia (mm) | Daythanh (mm) |
| 0.6 | 50 | 1.8 | 0.8 | 50 | 1.8 | 1.0 | 50 | 2.0 |
| 63 | 1.8 | 63 | 2.0 | 63 | 2.5 | |||
| 75 | 2.0 | 75 | 2.3 | 75 | 3.0 | |||
| 90 | 2.7 | 90 | 3.0 | 90 | 3.5 | |||
| 110 | 3.0 | 110 | 3.2 | 110 | 3.7 | |||
| 160 | 4.0 | 160 | 4.7 | 160 | 5.5 |
Linh vuc ung dung
Trong nha kinh
Tieu chuanthuchien sanpham
Gioi thieu san pham
Ong PVc-U däc biet dung de khoan gieng bao gom cac san pham ong thang va san pham mieng ong m? rong, san pham co mau trang, thong so ky thuat day du, chu yeu dudc si dung trong cac congtrinhkhoangieng.
Nhan biet san pham
·Dudc san xuat bang vat lieu moi chat luong cao, hoat dong an toan va dang tin cay.
·Cong thuic däc biet khong chua chi,xanh va than thien voi moi truong,bao ve chat luong nu?c.
· San pham co uu diem la trong luong nhe, do cuing cao va kha nang chong an mon.
·Ket noiva thi congthuan tien.
Kichcosanpham
| Docungvong | SN12.5 | SN20 | SN24 | SN32 | |
| Kichcsanpham | Kichthuocdodaythanhcoban | ||||
| 110 | 4.2 | ||||
| 125 | 4.2 | 4.8 | |||
| 140 | 5.0 | 7.0 | |||
| 160 | 6.2 | 7.7 | 9.5 | ||
| 200 | 7.7 | 9.0 | 9.6 | ||
| 250 | 10.0 | 14.8 | |||
Linh vuc ung dung
Chuyen dung cho cong trinh khoan gieng
Tieu chuan thuchiensan pham
"Q/LS 90-2020 Ong dac biet polyvinyl clorua cung (PVC-U) dung de phun thuoc vuon cay anqua"
Gioi thieu san pham
Dua tren dieu kien kinh te ky thuat cua vung nong thon nu?c toi,cac bien phap chinh de phat trien manh me ong nhua polyvinyl clorua cuing (Pvc-U) danh cho vuon cay an qua da dudc su dung rong rai trong va ngoai nu?c. San pham co däc tinh nhe, chong an mon, chong laohoa, de van chuyen va lap dat, de dang ket noi trong qua trinh thi cong. San pham nay co uu diem lon ve tiet kiem nang luong, bao ve moi truong, kinh te, thiet thuc, v.v. Day la san pham cap nhat cua vat lieu truyen thong.
Nhan biet san pham
· Kha nang chong lao h6a tot, tuoitho binh thuong co the lén toi 50 nam. · Duong ong co kha nang khang axit, khang kiem va chong an mon tuyet voi. · He so ma sat cua duong ong nho, dong nu?c chay ém, khong de bitac nghen va khoi luong cong viecbao tri nho. · Ong va phu kien duong ong co the dugc ket noi bang lien ket, phuong phap thi cong don gian, van hanh thuan tien, don gian va hieu qua lap dat cao.
Pham vi ap dung
Chuyen dung dudc dung de phun thuoc vuon cay an qua.
Quy cach ong chuyen dyng Pvc-U dephun thuoc vuon cay an qua
| Duongkinhngoai danhnghia dn（mm) | Dodaythanhdanhnghia(mm) | Ap suatdanhnghia |
| 16 | 3.0 | 3.5 |
| 20 | 3.0 | 3.5 |
Gidi thieu san pham
Ong nuoc PE nong nghiep co däctinh linh hoat tot, chong an mon manh,trong luong nhe va chong va dap tuyet voi. Ong va phu kien duong ong co the dudc ket noi bang ket noinhanh co hoc, cam va noi bang dung nhiet va cac phuong phap ket noi khac. He thong nay an toan va dang tin cay, chi phi xay dung thap. San pham da phat trien nhanh chong trong cac ung dung ky thuat cap nu?c nong nghiep. Thuc day manh me ong nu?c PE nong nghiep phu hop voi chu truong cua Bo Xay dung va Uy ban Kinh te Thuong mai Nha nu?c ve phat trien vat lieu xay dung hoa hoc, phu hop voi nhu cau phat trien nang cao muic song cua ngudi dan.
Nhan biet san pham
· Chon vat lieu loai PE100 chat luong cao, khong doc hai, hop ve sinh, than thien voi moi truong, khong dong can va khong san sinh vi khuan de dam bao chat luong nuc an toan va totcho suickhoe;
· Kha nang chong an mon tuyet voi. San pham co kha nang chong an mon tuyetvoi va khong bi an mon khi dan truyen phan bon va nuc, dong thoi khong pha huy cac chat dinh duong trong phan bon, dam bao cay trong phat trien khoe manh.
·Phuong thuc ket ni da dang, su dung ket noi nhanh co hoc, cam va noibang dung nhietva cac phuong phap ket noi khac.
· Duong ong co be mat ben trong nhan va kha nang can dong nu?c nho, co the lam giam apluc duong ong va muc tieu thy nang luong van chuyen nu?c.
· Ong co tinh linh hoat tot. Cac thong so ky thuat nho co the dugc cuon lai,tranh sui dung so ludng loncac moinoiva phu kien duong ong, dong thoigiam khoiluong cong viec xay dung; cac duong ong co kich thu?c lon co the dugc noitren mat datva sau d6 duoc dat, giambot kh6 khan va khoiluong cong viec thi cong, v.v.
· Tinh linh hoat tot, do ben va dap cao, kha nang chng dong dat manh va chong bien dang.
· C6 kha nang tot trong viec chong lan truyen vet nu't nhanh.
·Trong luong nhe, de van chuyen va lap dat.
·Tuoi tho dai. Trong dieu kien binh thuong, tuoi tho toi thieu la 50 nam.
· De dang tai che. Chat lieu PE la chat lieu than thien voi moi truong va co the tai che,tai su dung.
Phamviung dung cuasanpham
· Cac cong trinh tubitieu nong nghiep, bao gom cac cong trinh tu?itieu nong nghiep cd sa vat chat hien dai.
·Cong trinh nong nghiep huu canh gia dinh.
· Du an chuyen nu?c nuoi trong thuy san va chan nuoi.
·Tubi tieu bang duong ong ap suat thap, tubi phun,tu?i phun siéu nho va tu?i nho giot va cac cong trinh khac.
·Cong trinh trong hoa, trai cay va rau qua.
·Cong trinh xanh hoa san vuon.
Kich csan pham
· Mau säc san pham: den, xanh la cay (cac mau khac tuy chinh) · Tiéu chuan thuc hien duong ong Q/LS 103-2021
| Ten san pham | Anh san pham | Quy cach(mm) 75 | Dodaythanh (mm) | Do dai ong (m) | Mucap suat (MPa) |
| Cacloai ong thang | 2.3 | 0.4 | |||
| 90 | 2.8 | ||||
| 110 | 3.4 | ||||
| 160 | 5.1 | ||||
| 200 | 5.5 | ||||
| 250 | 7.2 | ||||
| 315 | 7.7 | 0.6 | |||
| 20 | 2.0 | ||||
| 25 | 2.0 | ||||
| 32 | 2.0 | ||||
| 40 | 2.3 | ||||
| 50 | 2.3 | ||||
| 63 | 2.4 | ||||
| 75 | 2.9 | ||||
| 90 | 3.5 | ||||
| 110 | 4.2 | ||||
| 160 | 6.2 | ||||
| 200 | 7.7 | ||||
| 250 | 9.6 | ||||
| Cac loai ong cuon | 315 12.1 | 0.6 | |||
| 20 | 2.0 | 50\100 | |||
| 25 | 2.0 | 501100 | |||
| 32 | 2.0 | 501100 | |||
| 40 50 | 2.3 2.3 | 501100 50 | |||
| Ten san pham | Anh san pham | Quycach DN(mm) |
| Mang song | 20/25/32/40/50 | |
| Co 45° | 20/25/32/40/50 | |
| Co90° | 20/25/32/40/50 | |
| Té 90° | 20/25/32/40/50 | |
| Te 90° chuyen bac | dn25x20/dn32x20/dn32x25/ dn40x20/dn40x25/dn40x32/ dn50x20/dn50x25/dn50x32/dn50x40 | |
| Bac chuyen bac | dn25x20/dn32x20/dn32x25/ dn40x20/dn40x25/dn40x32/ dn50x20/dn50x25/dn50x32/dn50x40 |
| Ten san pham | Anh san pham | Quy cachDN(mm) |
| Co 45°(135%) | 63/75/90/110/160/ 200/250/315 | |
| Co 91.5° | 63/75/90/110/160/200 | |
| Te nuoc pho thong 91.5°(88.5%) | dn63x63/dn75x75/dn90x90/ dn110x63/dn110x75/ dn110x110/dn160x110/dn160x160 | |
| Daunoihabacdongtam | dn75x63/dn90x63/dn90x75/ dn110x63/dn110x75/dn110x90/ dn160x90/dn160x110/dn200x160 |
Linh vuc ung dung
Tong quanveketcausanpham
San pham nay co cäu truc ba lop. Lop ben trong va ben ngoai dudc lam bang nhua PVC mem, 8 gita la l6p gia cuong dang luoi dugc lam bang sgi polyester chac chan dudc quan theo hai huong.
Dactinhvacong dyngcuasanpham
·Thiet ke toi uu hoa cong thuc nhua PvC mem dudc gia co bang polyester doc dao, san pham Lesso vuot troihon nhieu so voicacsan pham tuong tu ve kha nang chong an mon, chong lao hoa, chong mai mon va kha nang phuc hoi.
·Viecapdungcongnghexulyvathietbihang dauthe gicicua Chau Au giup san pham cuachung toi noi bat ve chat luong cao va do on dinh.
·Thiet ke lop gia cuong bang luoi co tinh chuyen nghiep cao giup san pham c the dap ung tot hon yeu cau cua nhieu ap luic su dung khac nhau.
·Su dung cong thuc khong chua chi va tuan thu cac tieu chuan quoc te ve ve sinh thuc pham.
· San pham cuc ky mem, mai, co the cuon lai va cuon tu do trong dieu kien moi truong -10oC\~65oC nen rat de si dung.
· San pham cuc ky mem, mai, co the cuon lai va cuon ty do trong dieu kien moi truong -10oC\~65oC nen rat de si dung.
·Trong luong nhe, chiu ap luctot. Theo nhu cau cua ngudi dung, cac san pham tuong ung co the duioc cung cap ap suat chju luctu 15kg/cm den 140kg/cm.
·Co thetaiche,khong gay onhimmoitruong trong qua trinh san xuat, xay dung va sidung,l san pham xanh, than thien voi moi truong.
Linh vuc ung dyng san pham
San pham co trong luong nhe, do trong suot cao, do dan hoi tot, dudc uing dung trong cap thoat nuoc va van chuyen cac chat long,khikhac trong nhieu linh vucnhu cong nghip,nong nghiep,xay dung.Tuythuoc vao apsuat trong linh vuc ung dung,co the lua chon cac san pham co ap suat lam viec khac nhau.Trong d6,loaila ap suat binh thuong (ong mang loai cap nuoc thong thuong), lailla ap suat cao hon (ong mang loai pho quat) va loai ll la duong ong mang ap suat cao.
Kich c san pham
| STT | Kichthuoc he inch (inch) | Kich thuochemet Duong kinh trong xduongkinh ngoai (mm) | Dodai (met/bo) | Ap suat lamviec (bar) | Ap suat chiu luc (bar) | Kichcobao bi (DxHxd)(mm) |
| 0104(1) | 5/32 | 4x8 | 100 | 10 | 24 | 350x130x150 |
| 0105(1) | 3/16 | 5x9 | 100 | 10 | 24 | 350x138x150 |
| 0106(1) | 1/4 | 6×10 | 100 | 8 | 19.2 | 350x160x150 |
| 0108(1) | 5/16 | 8×12 | 100 | 7 | 16.8 | 370x180x150 |
| 0109(1) | 3/8 | 9×13 | 100 | 7 | 16.8 | 400x180x150 |
| 0110(1) | 3/8 | 10×14 | 100 | 7 | 16.8 | 420x170x150 |
| 0112(1) | 1/2 | 12×16 | 100 | 5 | 12 | 450x160x150 |
| 0113(1) | 1/2 | 13x17 | 100 | 5 | 12 | 490x190x150 |
| 0115(1) | 5/8 | 15×19 | 100 | 5 | 12 | |
| 0116(1) | 5/8 | 16×20 | 30 | 5 | 12 | 400x130x250 |
| 0116(1) | 5/8 | 16×20 | 40 | 5 | 12 | 440x130x250 |
| 0116(1) | 5/8 | 16×20 | 50 | 5 | 12 | 540x200x200 |
| 0116(1) | 5/8 | 16×20 | 100 | 5 | 12 | 570x200x200 |
| 0119(1) | 3/4 | 19×24 | 30 | 4 | 9.6 | 490x160x300 |
| 0119(1) | 3/4 | 19×24 | 40 | 4 | 9.6 | 570x200x200 |
| 0119(1) | 3/4 | 19×24 | 50 | 4 | 9.6 | 570x140x250 |
| 0119(1) | 3/4 | 19×24 | 100 | 4 | 9.6 | |
| 0122(1) | 55/64 | 22×27 | 50 | 4 | 9.6 | 710x170x450 |
| 0122(1) | 55/64 | 22×27 | 100 | 4 | 9.6 | |
| 0125(1) | 25×30 | 30 | 4 | 9.6 | 650x160x450 | |
| 0125(1) | 1 | 25×30 | 40 | 4 | 9.6 | 700x160x450 |
| 0125(1) | 1 | 25×30 | 50 | 4 | 9.6 | 790x140x400 |
| 0125(1) | 1 | 25×30 | 100 | 4 | 9.6 | 850x230x450 |
| 0132(1) | 1-1/4 | 32×38 | 50 | 4 | 9.6 | 870x170x500 |
| 0138(1) | 1-1/2 | 38×45 | 40 | 4 | 9.6 | 970x180x500 |
| 0150(1) | 2 | 50×59 | 40 | 3 | 7.2 | 1060x250x600 |
| STT | Kich thuoc heinch (inch) | Kich thuchemet Duong kinh trong. x duong kinh ngoai (mm) | Dodai (met/bo) | Ap suat lamviec (bar) | Ap suat chiu luc (bar) | Kich cobaobi (DxHxd)(mm) |
| 0104(I) | 5/32 | 4x8 | 100 | 12 | 28.8 | 380x138x150 |
| 0105(I) | 3/16 | 5×10 | 100 | 10 | 24 | 350x160x150 |
| 0106(I) | 1/4 | 6x11 | 100 | 10 | 24 | 360x170x150 |
| 0108(I) | 5/16 | 8×13 | 100 | 10 | 24 | 400x180x150 |
| 0109(I) | 3/8 | 9×14 | 100 | 10 | 24 | 420x170x150 |
| 0110(I) | 3/8 | 10×15 | 100 | 8 | 21.6 | 430x180x150 |
| 0112(I) | 1/2 | 12×17 | 100 | 8 | 19.2 | 480x180x150 |
| 0113(I) | 1/2 | 13×18 | 100 | 8 | 19.2 | 510x200x150 |
| 0115(I) | 5/8 | 15×20 | 50 | 8 | 19.2 | 480x150x200 |
| 0116(1) | 5/8 | 16×21 | 100 | 8 | 19.2 | 500x180x200 |
| 0119(I) | 3/4 | 19×25 | 50 | 8 | 19.2 | 580x150x250 |
| 0125(I) | 1 | 25×31 | 50 | 6 | 14.4 | 810x150x450 |
| 0132(I) | 1-1/4 | 32×39 | 50 | 5 | 12 | 870x190x500 |
| 0138(I) | 1-1/2 | 38×46 | 40 | 5 | 12 | 980x180x500 |
| 0150(I) | 2 | 50×60 | 40 | 4 | 9.6 | 1080x250x600 |
| STT | Kich thuoc heinch (Inch) | Kich thuochemet Duong kinh trong x duong kinh ngoai (mm) | Dodai (met/bo) | Ap suat lam viec (bar) | Ap suat chiu luc (bar) | Kichcobaobi (DxHxd)(mm) |
| 0106() | 1/4 | 6x12.2 | 100 | 15 | 36 | 380x180x150 |
| 0107(I) | 1/4 | 6x13.5 | 100 | 16 | 38.4 | 400x180x150 |
| 0108() | 5/16 | 8x13.5 | 100 | 12 | 28.8 | 420x180x150 |
| (11)60L0 | 3/8 | 9×15 | 100 | 12 | 28.8 | 430x180x150 |
| 0110() | 3/8 | 10x16 | 100 | 12 | 28.8 | 450x160x150 |
| 0112() | 1/2 | 12×18 | 100 | 10 | 24 | 510x200x150 |
| 0113(I) | 1/2 | 13×19 | 100 | 10 | 24 | 550x200x150 |
| 0115() | 5/8 | 15×22 | 100 | 10 | 24 | 500x180x200 |
| 0116(I) | 5/8 | 16×22 | 100 | 10 | 24 | 500x180x200 |
| 0119（) | 3/4 | 19×26 | 50 | 10 | 24 | 590x200x250 |
| 0125(1) | 1 | 25x32 | 50 | 8 | 19.2 | 820x180x450 |
| 0132（) | 1-1/4 | 32×40 | 50 | 8 | 19.2 | 900x200x500 |
| 0138() | 1-1/2 | 38×48 | 40 | 8 | 19.2 | 1000x200x500 |
| 0150（) | 2 | 50x62 | 40 | 6 | 14.4 | 1120x300x600 |
| STT | Kichthucheinch (Inch) | Kihthulochemet Dungkinhtongxdungknngoai(mm) | Dodai (met/bo) | Apsuatlamviec (bar) | Apsuatchiuluc (bar) | Kichcobaobi (DxHxd)（mm） |
| 0212 | 1/2 | 12x16 | 100 | 5 | 12 | 450x160x150 |
| 0213 | 1/2 | 13×17 | 100 | 5 | 12 | 490x190x150 |
| 0215 | 5/8 | 15×19 | 50 | 5 | 12 | 480x150x200 |
| 0216 | 5/8 | 16×20 | 50 | 5 | 12 | 500x140x200 |
| 0219 | 3/4 | 19×24 | 50 | 4 | 9.6 | 570x140x250 |
| 0225 | 1 | 25x30 | 50 | 4 | 9.6 | 790x140x450 |
| 0232 | 1-1/4 | 32×38 | 50 | 4 | 9.6 | 870x170x500 |
| 0238 | 1-1/2 | 38×45 | 40 | 4 | 9.6 | 970x180x500 |
| 0250 | 2 | 50×59 | 40 | 3 | 7.2 | 1060x250x600 |
Cac san pham tuoitiet kiem nu?c cua Lesso cung cap cac giai phap he thong tu?itiet kiem nuoc thong minh chat luong cao dua tren nhu cau cuakhach hang?cacthitruong khu vuc khacnhau,baogomtu?i phun mua,tu?i nho giot,tuoi nha, cac bo phan ket noi, thiet bi loc,bo dieu khien va cac loai san pham khac. San pham dudc su dung rong rai trong nong nghiep tuoi tiet kiem nu?c & cac khu vuc ban kho can, tu?i phun mua nha kinh cay giong hien dai, tu?i nho giot chinh xac cua cd s? san xuat va cac linh vuc khac.
Nam loi ich chinh cua viec tuoi tiet kiem nuoc
Cac loai tu?i nho giot
Tieu chuan thyc hien san pham
"Q/MMLS 08-2021 Ong tu?i nho giot tich hop trong bang nhya va bang tu?i nho giotdetuoitietkiemnuoc"
Gioi thieu san pham
Bang tui nho giot dang mieng, dudc tich hop ben trong dudc si dung rong rai trong cacdy an tuoitiu khac nhau nhu cay trong trong nha kinh, rau, vuon che, cay än qua, rung kinh té va cay trong tren dong ruong.
Nhan biet san pham
· Vat lieu moi than thien voi moi truong ·Hieu suat chong täc nghen tot · Dong chay dong deu
Tinh nang chinh cua san pham
O Bang 5: Yeu cau ve tinh nang doi voi bang tuoi nho giot
| Tinh nang | Yeucaukythuat |
| Tinh dongdeucuadongchay | ≤7% |
| Moi quan he gida toc dodong chay va ap lyc nuoc dau vao | ±7% |
| Khanangchongtacnghentramtich | Nuocnhogiot tucac lonhogiot |
| Khanangchiuaplucnuoc23℃ | Ty lésai léchdong chay trungbinh±7% |
| Ap suatchiu luc | Unglucnotuicthoi≥2 lanapsuat lamviecdinhmuc |
| Kiem trakhanangchongkéo | Ludngthayd6i≤5% |
| Ham luong cacbon den (phan khoi luong) | (2.25±0.5)% |
| Phantancacbonden | ≤3cäp |
| Khac | ThuchientheoQ/MMLS08-2021 |
1. Bang tu?i nho giot dang mieng dugc tich hop ben trong va cac phu kien
| Loaiquy cach:DN16 | Ap suat lam viec (MPa) 0,1 | |||
| So vat lieu | Khoangcach dau nhogiotmm | Luu luong dau nho giot L/H | Do day thanh mm Do daimoi cuon m | |
| 8040040086 | 200 | 1.38 | 0.3 1000 | |
| 8040040228 | 200 | 1.38 | 1500 | |
| 8040040229 | 300 | 1.38 | 0.2 0.3 | 1000 |
| 8040040230 | 300 | 2 | 1000 | |
| 8040040231 | 300 | 2.7 | 0.3 0.3 | 1000 |
| 8040040232 | 300 | 1.38 | 1000 | |
| 8040040233 | 300 | 2 | 0.4 0.4 | 1000 |
| 8040040234 | 300 | 2.7 | 1000 | |
| 8040040063 | 300 | 1.38 | 0.4 0.2 | 1500 |
| 8040040073 | 300 | 2.7 | 0.2 | 1500 |
| Loaiquy cach:DN20 | Ap suat lam viec(MPa) 0,1 | ||||
| Sovatlieu | Khoangcachdau nhogiotmm | Luu luong dau nhogiotL/H | Ddaythanhmm | Dodaimoicuonm | |
| 8040040169 | 300 | 1.38 | 0.2 | 1500 | |
| 8040040170 | 300 | 2.7 | 0.2 | 1500 | |
| Ten san pham | Anh sanpham | So vat lieu | Mahieu quy cach |
| Te thuong dung | 8040050168 | dn12 | |
| Te thuong dung | 8040050169 | dn16 | |
| Te thuong dung | 8040050170 | dn20 | |
| Bang tu?i nho giot truc tiep | 8040050172 | dn12 | |
| Bang tudi nho giot truc tiep | 8040050173 | dn16 | |
| Dau bit xoay trai cho bang tuoi nho giot | 8040050203 | dn16 | |
| Ren ngoai xoay trai tructiep | 8040050214 | DN16x1/2 " | |
| Ren ngoai xoay trai truc tiep | 8040050217 | DN16x3/4 " | |
| Bang tuoi nho giot dugckhoa nguoctryc tiep | 8040050164 | dn12 | |
| Bang tuoi nho giot dugckhoa ngudc truc tiep | 8040050165 | dn16 | |
| Bang tuoi nho giot dugckhoa ngudc truc tiep | 8040050166 | dn20 |
Gidi thieu san pham
Ong LDPE dung tuoitieu dugc sui dung rong raitrong cac du anthuy loi khac nhau nhu cay trong trong nha kinh, rau, vuon che, cay an qua, rung kinh te va cay trong tren dong ruong.
Nhan biet san pham
·Vat lieu moi than thien voi moi truong
·Chong an mon
·Chonglaohoa
· Kha nang chong keo va uon
·Do deo daitot
Cac truong hop ung dung
OngLDPE va phy kien tuoi tieu
| Mahieuco | Apsuat lam viec(MPa) | Do daimoicuon（m) |
| dn16X1.0 | 0.4 | 100 |
| dn20X1.0 | 0.4 | 100 |
| dn25X1.2 | 0.4 | 100 |
| dn32X1.3 | 0.4 | 100 |
| dn16X1.2 | 0.6 | 100 |
| dn20X1.3 | 0.6 | 100 |
| dn25X1.4 | 0.6 | 100 |
| dn32X1.5 | 0.6 | 100 |
| Ten san pham | Anhsanpham | So vat lieu | Ma hieu quy cach |
| Mang song | 8040050149 | dn16 | |
| Mang song | 8040050150 | dn20 | |
| Té | 8040050154 | dn16 | |
| Té | 8040050155 | dn20 |
| Co90° | 8040050157 | dn16 | |
| Co 90° | 8040050158 | dn20 | |
| Daubit | 8040050223 | dn16 | |
| Dau bit | 8040050224 | dn20 | |
| Noi thang ren ngoai | 8040050133 | DN16x1/2 " | |
| Noi thang ren ngoai | 8040050134 | DN20x1/2 " | |
| Noi thang ren ngoai | 8040050136 | DN16x3/4 " | |
| Noi thang ren ngoai | 8040050137 | DN20x3/4 " | |
| Gia da cong nang | 8040050192 | ||
| 107 mui nhon cong | 8040050237 | ||
| 125 mui nhon thang | 8040050238 | ||
| May duc lo cam tay | 8040050242 | ||
| Bit ong PE dang gap | 8040050143 | dn16 | |
| Bit ong PE dang gap | 8040050144 | dn20 |
Cac loai dau noi song PP dung cho tu?i tieu
Dau noi song vaphy kien PP dungcho tuoi tieu
| Cac loaisan pham | Ap suat | Ten san pham | Quy cach (mm) | Anh san pham | So vat lieu |
| Dau noi song PP dung cho tuoi tieu | 0.6MPa | Mang song | 20 | 8040050313 | |
| Mang song | 25 | 8040050321 | |||
| Mang song | 32 | 8040050315 | |||
| Mang song | 40 | 8040050323 | |||
| Té | 25 | 8040050322 | |||
| Té | 32 | 8040050316 | |||
| Té | 40 | 8040050324 | |||
| Co le noi song | 20 | 8040050314 | |||
| Colé noi song | 25 | 8040050333 8040050331 8040050332 | |||
| Co lé noi song | 32 | ||||
| Co le noi song | 40 |
⊚ Tiéu chuan thuc hien: GB/T 20201-2006 Phu kien noi co khi cho ong ap luyc polyethylene (PE) dung de tu6i tiéu
Tinh nang san pham
| Cachangmuc | Tinhtoanapsuatthunghiem | Chithi |
| Thunghiémthuyluctinh20C1h | Giatriapsuatdanhdinh thietke(PN)x2,1lan | Khongvnut,khongrori |
| Tinh nangchongkéo | Giatriapsuatdanhdinh thietke（PN)xTT/4xd2x1.5 | Khongvnut,khongrori |
| CacnoidungkhacseduocthuchientheoGB/T20201-2006 | ||
Ongnoisong cao apva phykien Ppdung cho tuoitieu
| Cac loai san pham | Ap suat | Ten san pham | Quy cach (mm) | Anh san pham | So vat lieu |
| Dau noi song PP dung cho tuoitieu | 1.0MPa | Mang song | 25 | 8040050325 | |
| Mang song | 32 | 8040050327 | |||
| Mang song | 40 | 8040050329 | |||
| Té | 25 | 8040050326 | |||
| Té | 32 | 8040050328 | |||
| Té | 40 | 8040050330 | |||
| Co le noi song | 20 | 8040050317 | |||
| Co le noi song | 25 | 8040050318 | |||
| Co le noi song | 32 | 8040050319 | |||
| Co le noi song | 40 | 8040050320 |
DTiéu chuan thuc hien: Q/LS 46-2022 Phu kien noi co khi cho 6ng cao ap polyethylene (PE) dung cho tu?itiéu
Tinh nang san pham
| Cachangmuc | Tinhtoanapsuatthunghiem | Chithi |
| Thunghiemthuyluctinh20C1h | Giatriapsuatdanhdinh thietke(PN)x2,1lan | Khongvnut,khongrori |
| Tinhnangchongkéo | Giatriapsuatdanhdinh thietke(PN)×TT/4xd2x1.5 | Khongvnut,khongrori |
| Cacnoidungkhacthuchien theoQ/LS46-2022 | ||
Cac loai Mang trong trot chat nen PVC-U danh cho nong nghiep cd s?
Tieu chuan thychien san pham
《"Q/HLS 10-2023 Be trong trot bang nhua polyvinyl clorua cuing (PVC-U) va cac phu kien danh cho nong nghiep co s"》)
Gioi thieu san pham
Mang trong trot chat nen PVc-U dugc su dung rong rai trong viec trong trot cac loai trai cayva rau qua (ca chua, dua chuot,trai cay,v.v.) va hoa trong nha kinh va lam vuontai nha ma khong can dat.
Nhan biet san pham
Cong thuc vat lieu chat luong cao, khong chua chi, khong gay o nhiem kim loai nang.
An toan, ve sinh va phu hop voiyeu cau xanh va than thien v?i moi truong trong trot chat nen.
Co mot lop chong tham tich hgp giup ngan chan hieu qua suy tich tu nuoc & re va tang kha nang thong khi cua cay trong.
C6 kha nang chong an mon tuyet vdi, chong axit, kiem, muoiva an mon dung moi h6a hockhac.
Cac truong hop ung dyng
Quycach cua Mang trong trot chat nen va phy kien
| Ten san pham | Anh san pham | Ma sovat lieu | Quy cach (mm) | Ddaythanh(mm) | Do daim |
| Mang trong trot chat nen | 8040180003 | 220×150×200 | 3 | 6m | |
| Mang trong trotchatnen | 8040180004 | 220×150×200 | 3 | 4m | |
| Mang trong trot chat nen loai Il | 8040180011 | 300×200×230 | 3 | 4m | |
| Mang trong trot chat nen loai Il | 8040180012 | 300×200×230 | 3 | 6m | |
| Mang trong trot chat nen loai Il | 8040180005 | 220×150×200 | 2.8 | 4m | |
| Mang trong trot chat nen loai ll | 8040180006 | 220x150×200 | 2.8 | 6m | |
| Mang trong trot chat nen loai Il | 8040180007 | 160×120x150 | 2.5 | 4m | |
| Mang trong trot chat nen loai ll | 8040180008 | 160x120x150 | 2.5 | 6m |
| Ten san pham | Anh san pham | Ma sovat lieu | Quy cach (mm) |
| Nap thoat nuoc Mang trong trot chat nen | 8040170012 | 220×150×200 | |
| Nap thoat nuc Mang trong trotchat nen loaill | 8040170019 | 300×200×230 | |
| Mang trong trot chat nen loaill noi thang | 8040170021 | 300×200×230 | |
| Mang trong trot chat nen noi thang | 8040170011 | 220×150×200 | |
| Mang trong trot chat nen loai I moc chong bien dang | 8040170020 | 300×200×230 | |
| Mang trong trot chat nen moc chong bien dang | 8040170013 | 220×150×200 | |
| Mang trong trot chat nen loaill noi thang | 8040170014 | 160×120×150 | |
| Nap thoat nuoc Mang trong trot chat nen loai ll | 8040170015 | 160×120×150 | |
| Mang trong trot chat nen loai ll moc chong bien dang | 8040170016 | 160x120×150 |
Tieu chuan thyc hien san pham
"Q/HLS 10-2023 Be trong trot bang nhua polyvinyl clorua cung (PVC-U) va cac phu kien danh cho nong nghiep co so"
Gioi thieu san pham
Mang trong sd dua Pvc-U, dudc su dung rong rai trong viec trong trot cac loai trai cay va rau qua (6t mau, ca chua, dua chuot,trai cay, v.v.) va hoa trong nha kinh va lam vuon tai nha.
Nhan biet san pham
Cong thuc vat lieu khong chua chi, chat luong cao dac biet, khong gay o nhiem kim loai nang, dam bao hieu qua su an toan va ve sinh cua cac cd so trong trot va dap ung cac yeu cau ve xanh va bao ve moi truong trong trot chat nen;
·Mang trong so dua co mot lop chong tham tich hop giup ngan chan hieu qua su tich tu nu?c re va tang kha nang thong khi cua cay trong.
San pham dudc trangbi day du, theo yeu cau cua nha may, tieu chuan h6a cao, de läp dat va chi phi dy an thap;
Cac truong hop ung dung
Quycach cuaMang trongtrotchat nen va phykien
| Ten | Hinhanh | Masovatlieu | Quycach(mm) | Ddaythanh(mm) | Dodaim |
| Mangtrongso duaPVC-U | 8040180001 | 170×150×65 | 3.0 | 6m | |
| 8040180002 | 220×200×65 | 3.0 | 6m |
| Ten | Hinh anh | Masovatlieu | Quycach(mm) |
| Nap thoatnuoc Mangtrongsodua | 8040170009 8040170010 | 170×150×65 220×200×65 | |
| Hinh anh | |||
| Ten Mangtrongso | Masovatlieu 8040170007 | Quycach（mm) | |
| dua noi thang | 170×150x65 | ||
| 8040170008 | 220×200×65 |
Tinh nang san pham
ctinh chat vat ly va co hoc cua Mang trong trot phaituan thu cacyeu cau trol
⊚ Bang 1: Tinh chat vat ly va co hoc
| Cachang muc | Yeucau |
| NhietdolammemVicat/oC | ≥75 |
| Ty lé co ngot theo chieu doc/% | ≤5 |
| Thu nghiemva dapkhitha | Dat10/9 |
Cac tinh chat vat ly va co hoc cua phu kien phai tuan thu cac yeu cau trong Bang 2.
| Cachangmuc | Cachangmuc |
| NhietdolammemVicat/oC | ≥74 |
| Thunghiemloa | PhuhopvoicacquydinhcuaGB/T8803-2001 |
| Thunghiemtharoi | Khongnutvo |
| akhongapdungchomoc. | |
Ham luong chi: Ham luong chitrong Mang trong trot va phy kien khong dugc ln hon 0,005% (phan khoiluong)
Tieu chuan thyc hien san pham
"Q/HLS 13-2023 Mang trong trot bang Polypropylen (PP) va phu kien danh cho nong nghiep cd so"
Gioi thieu san pham
Mang trong dang tam dudc su dung rong rai trong viec trong trot cac loai trai cay va rau qua (6t mau, ca chua, dua chuot, trai cay, v.v.) va hoa trong nha kinh va lam vuon tai nha.
Nhan biet san pham
Chong buic xa cuc tim, khu trung bang hoi nuoc, hoa chat va axit. ·Läp dät linh hoat va cau truc don gian phu hop v?i nhieu loai chat nen khac nhau.o ·An toan, ve sinh va phu hop voi yeu cau xanh va than thien voi moi truong trong trot chatnen.
Cac truong hop ung dung
Quy cach Mang trong trot dang tam va phu kien
| Ten | Hinh anh | Quycach(mm) | Ddaythanh（mm) | Ddai（m/cuon) |
| Mangtrong dangtam | 250×400×250 | 0.75 | 80 | |
| Ten | Hinh anh | Quycach（mm) | Ddaythanh（mm) | Dodai（m/cuon) |
| Mangthoat nuocdangtam | 65x400×65 | 0.75 | 80 |
| Ten | Hinh anh | Masovat lieu | Quycach（mm) | |
| PhukienMang trong dang tam | 8040170017 | 250x20 | ||
| PhukiendoMang trong dang tam | L | 8040170018 | 85×74 | |
| PhukienddeMang trong dang tam | 400 | |||
Cac loai ong thuy canh PVC-U danh cho nong nghiep co s?
Ket cau san pham
Tieu chuan thyc hien san pham
"Q/HLS 11-2023 Ong va phu kien cung bang polyvinyl clorua (PVC-U) danh cho nong nghiep co so
Gioi thieu san pham
Ong trong trot dong mo vuong PVC-U, dudc sui dung rong rai trong trong trot khong can dat (thuy canh) cac loai rau (chu yeu la rau an la) va hoa trong nha kinh va lam vuon tai nha. Ong trong trot dong m? vuong PVc-U bao gom nap tren va de,thiet ke tach rdi cho phép nang nap tren va rua truc tiep khi can lam sach va khu trung ong trong trot, giai quyet van de kh6 ve sinh va khu trung ong trong trot vuong.
Nhan biet san pham
Cong thuc vat lieu khong chua chi, chat luong cao chuyen dung,khong gay o nhiem kim loai nang, dam bao hieu qua an toan, ve sinh cho cac cd so trong trot va dap ung cac yeu cau ve xanh va moi truong cho viec trong rau dudc bon phan bang nuc;
Co kha nang chong an montuyetvoi, chongaxit, kiem,muoiva an mon dung moi hoa hockhac;
San pham dudctrangbiday du,theoyeu cau cua nha may,tieu chuan hoa cao,de lap dät va chi phi duy an thap;
·Duong ong su dung thiet ke tach rdi, sanpham de dang lam sachva bao tri;
·Phuong phap lap dat ky thuat da dang: Theo yeu cau trong trot va dia diem, co the dudc läp rap thanh nhieu dang giai phap ky thuat khac nhau nhu loai trai phang, loai A ba chieu va loai doc ba chieu.Cungcap mot bo giai phap hoan chinh cho viectrong trot khong dung dat trong cd so nhakinh va trong trot khong dung dat trong lam vuontainha.
Quy cach ong trong trot dong m?vuongPvc-uva phykien
| Ten | Hinhanh | Sovatlieu | Quycach | Kichthuoc m816（mm） | Soluong 1o (cai) | Doday thanh（mm) | Daiong(met) |
| Ong trong trotdong mvuong PVC-U | 8040160001 | 82×50 | 50 | 46 | 2.0 | 6.0 | |
| 8040160002 | 82×50 | 50 | 26 | 2.0 | 4.0 | ||
| 8040160003 | 82×50 | 50 | 26 | 2.0 | 3.9 |
| Ten | Hinh anh | So vat lieu | Quy cach (mm) |
| Ong trong trot dong m? vuong PVC-U noi thang | 8040170001 | 82×50 | |
| Nap day dau ong trong trot dong m? vuong | 8040170002 | 82×50 | |
| Kep ong trong trot dong m8 vuong | 8040170004 | 82×50 | |
| Ong trong trot dong m? vuong co nap vuong va dau tron | 8040170003 | 82×50×32 |
Ket cau san pham
Tieu chuan thuc hien san pham
"Q/HLS 11-2023 Ong va phu kien cung bang polyvinyl clorua (PVC-U) danh cho nong nghiep cd so"
Gioi thieu san pham
Ong trong trot vuong PVC-U, dudc si dung rong rai trong trong trot khong can dat (thuy canh)cacloairautrongnhakinh va lamvuon tainha(chuyeu lacacloairauan lanhu rau diep, bap cai, rau bina, hung que, v.v.), hoa, v.v.
Nhanbiet san pham
Cong thuc vat lieu khong chua chi, chat luong cao chuyen dung, khong gay o nhiem kim loainang, dam bao hieu qua an toan, ve sinh cho cac cds trong trotva dap ung cac yeu cau ve xanh va moi truong choviec trong rau dugc bon phan bang nuc;
·C6 kha nang chong an mon tuyet voi, chong axit, kiem, muoi va an mon dung moi hoahockhac; San pham dudc trang bi day du, theo yeu cau cua nha may,tieu chuan hoa cao, de läp dät va chi phi dy an thap; Phuong phap lap dät ky thuat da dang: Theo yeu cau trong trot va dia diem, co the dudc lap rap thanh nhieu dang giai phap ky thuat khac nhau nhu loai trai phang, loai A ba chieu va loaidoc ba chieu. Cung cap mot bo giai phap hoan chinh cho viec trong trot khong dung dat trong co sd nha kinh va trong trot khong dung dat trong lam vuontai nha.
Tinh nang san pham
Cac tinh chat vat ly va co hoc cua ong va phu kien phai tuan theo cac quy dinh trong Bang 3 va Bang 4.
⊚ Bang 3: Tinh chat vat lyva co hoc cua ong
| Cachangmuc | Yeucau | |
| Thunghiemvadapkhitha(OoC)a | Dat10/9 | |
| Dco theochieudoca/% | Ongvuong | ≤3.5 |
| Ong tron S> | ||
| NhietdolammemVicata/°C | ≥75 | |
| Thunghiemdetphangβ | Khongcovetnutvotrenmau | |
| achiapdungchoduongongtruockhikhoan. | β chi ap dung cho ong co lo. | |
| Cachang muc | Yeucau |
| NhietdolammemVicat/oc | ≥74 |
| Thu nghiemkhoang say | Phu hop v?i cac yeu cau cua GB/T 8803-2001 |
| Thu nghiem tha roi | Khongnutvo |
Ham luong chi: Hamluong chitrong ong, phy kiendong, maong khong dugc vugtqua 50mg/kg
Ong trong trot va phykien vuongPvc-U
Ong trong trot vuong R trong PVC-U
| Ten | Hinh anh | Sovat lieu | Quycach | Kichthuoc m816（mm) | soludng 16 (cai) | Doday thanh(mm) | Dai ong (met) |
| Ongtrong trot vuongR trongPVC-U | 8020013010 | 75x50 | 50 | 40 | 1.8 | 6.0 | |
| 8020013011 | 75x50 | 50 | 26 | 1.8 | 3.9 | ||
| 8020013012 | 110×73 | 50 | 35 | 2.0 | 6.0 | ||
| 8020013013 | 110×73 | 50 | 20 | 2.0 | 4.0 |
| Ten | Hinh anh | Sovat lieu | Quy cach (mm) |
| Tedau noi tron | 8020023304 | TrongR50×75×50 | |
| 8020023305 | TrongR75×110×73 | ||
| Napvuongnoi dau tron | 8020023306 | TrongR75×50×32 | |
| 8040170006 | Trong R110×73×32 | ||
| Nap dau ong vuong | 8020023307 | TrongR75×50 | |
| 8020023308 | TrongR110×73 | ||
| Mang song ong vuong | 8020020785 | TrongR75×50 | |
| 8020020783 | Trong R110×73 | ||
| Kep ong vuong | 8020020200 | TrongR110×73 |
| Ten | Hinh anh | Sovat lieu | Quycach | Kichthuoc m816（mm） | Soluong 10 (cai) | Doday thanh(mm) | Daiong(met) |
| PVC-UPhu kien ong trong trot vuongR ngoai | 8020013014 | 75x50 | 50 | 40 | 1.8 | 6.0 | |
| 8020013015 | 75x50 | 50 | 26 | 1.8 | 3.9 | ||
| 8020013016 | 110×73 | 50 | 35 | 2.0 | 6.0 | ||
| 8020013017 | 110×73 | 50 | 20 | 2.0 | 4.0 |
| Ten | Hinhanh | Sovatlieu | Quycach(mm) |
| Tedaunoitron | 8020023309 | NgoaiR50X75X50 | |
| 8020023310 | NgoaiR75x110x73 | ||
| Napvuongnoidau tron | 8040170005 | NgoaiR73X110X32 | |
| 8020023311 | NgoaiR75×50×32 |
