该页无缩略图
Product development background
The current power management market is vast. In multifunctional power rooms and cabinets in buildings, campuses, residences, power statistics, government agencies, and other places, distribution boxes and terminal cabinets on the wall can be seen. However, traditional power distribution control methods are outdated, and equipment is in standby mode for years, resulting in significant power consumption. Key data such as current, voltage, and temperature are difficult to collect, and without intelligent monitoring and energy consumption verification functions, the health status of equipment power usage is "invisible and intangible". Taking the LED screen detection scenario as an example, common faults such as black screens, flickering screens, and screen jumps cannot be warned in advance, making it difficult to achieve the goal of preventive maintenance. Such issues not only significantly increase the risk of operational accidents but also significantly increase the difficulty of operation for both professional and non-professional personnel, resulting in strong uncontrollability and inconvenience in power distribution management.
Currently, power management technology is rapidly advancing towards intelligent power distribution that is loT-enabled, controllable, high in safety factor, capable of early warning, data visualization, and emergency protection. However, various audio and video strong and weak current engineering providers and integrators lack corresponding safety awareness for current engineering power management, and rely too much on traditional power distribution systems for power safety considerations. As a result, the corresponding market for "integrated system of power safety management and controllability" technology and products tends to be blank, leading to various degrees of safety hazards after project delivery, and thus various accidents caused by power management safety have occurred. In response, Yingwang has conducted special technological innovation and research on "power management" at the source of the project and created a series of intelligent power distribution products.
Application scenarios
The product has a wide range of applications, including LED display control, stage lighting, public broadcasting, conferencing, and other fields. It can be installed in multifunctional computer rooms and cabinets in buildings, campuses, residences, power statistics centers, government agencies, and other places.
CinemaKing Al power loT ecosystem progressiveness
Al Detection Protection
The electro-ripple algorithm module is installed on a standalone display screen to detect sub-optimal health conditions of the LED display screen. It provides advance warnings for issues such as "screen flickering, screen jumping, and black screen", enabling proactive maintenance before failures occur and ensuring user safety during use.
High-power adaptive protection
Supports high-power load operation, provides specialized protection against sudden transient current/power surges in equipment, and ensures power supply stability.
Disadvantages of traditional universal electrical cabinets
Pre-configured safety algorithm mechanisms for overvoltage (surge protection), undervoltage protection, overcurrent (load) protection, and overtemperature protection.
Security data management
It enables visual operation and maintenance management of LED screen usage status, integrating precise electrical ripple data collection, energy consumption prediction, Al intelligent monitoring, and data management functions to achieve comprehensive digital control of power distribution status.
Compact and easy to install
Small size, easy to install, high safety factor, and low cost.
Material Craftsmanship
The structural material is 304 stainless steel, which has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties; it has good hot workability such as stamping and bending, and no heat treatment hardening phenomenon.
In terms of LED screen inspection, common issues such as black screens, flickering screens, and screen jumps cannot be predicted in advance, making it impossible to achieve pre-maintenance for faults
X Various energy consumption data cannot be verified
Information collection for current, voltage, temperature, and power outages is challenging
X Intelligent electricity e and health
X The ontrol me hodmthd
It is impossible to know the accurate power consumption health status of the device
Leakage protection has the characteristics of unmeasurable leakage value and non-self-checking leakage power
Al power distribution detection manager for LED
Features
Equipped with a programmable power management system, it enables real-time data feedback monitoring and control. Adopting electrical standards, it features a professional electrical structure design. With single-channel output of 10/16/30A, total output current ranging from 38-200A, and 8-27 air switches, it offers superior short-circuit protection, leakage protection, and over-current protection compared to traditional air switches. Its unique development interface allows for secondary development by customers, seamlessly integrating into various systems and platforms.
(The transient tripping current and transient power of this series of products are five times the rated current and rated power. During use, it is necessary to ensure that the actual current and actual power do not exceed this transient limit to prevent triggering a tripping event that could affect equipment operation, excluding the main circuit breaker.)
Highlights
It can remotely control the closing or disconnecting operation of the physical handle;
It can read data such as current, voltage, electricity consumption, and terminal temperature of electrical equipment;
It features functions such as short circuit protection, over-voltage and under-voltage protection, over-current protection, and over-temperature protection;
The product ID number is manually set without the need for a computer, facilitating on-site setup and integration;
It can be integrated into powerful local and remote management platforms to achieve real-time interconnection and mutual control of multiple datasets;
Open third-party interfaces for customers to conduct secondary development;
It features over-temperature, over-current, over-voltage, and under-voltage alarm functions, and allows for the setting of early warning and alarm information through software;
System application topology diagram
RS15NMCRse orkv erED
Equipped with a programmable power management system, it enables real-time data feedback monitoring and control. Adopting electrical standards, it features a professional electrical structure design. The single output is 16/30A, with a total output current of 125A. It includes 11 independent control multi-function sockets, 2 combined multi-function sockets, and 2 uninterrupted multi-function sockets (10A sockets x 12, 16A sockets x 3). There is also 1 USB 1.5A interface, 1 TYPE-C 1.5A interface, 1 PRE SYS, 2 IO, 1 RS485 interface, 1 manual electronic lock, 1 one-button timing master switch program function key, and an electronic display screen. Compared to traditional air switches, it offers superior short circuit protection, leakage protection, and overcurrent protection. Equipped with a Web interface, it allows real-time querying of current, voltage, temperature, on/off status, circuit breaker, electricity consumption, and other data for each circuit. The Web function control gateway port is RJ45. It provides a unique development interface for customers to conduct secondary development, seamlessly integrating into various systems and platforms.
Product functional features
The single output is 16/30A, with a total output current of 125A. It comes with 11 independent control multi-function sockets, 2 combined multi-function sockets, and 2 uninterrupted multi-function sockets (10A sockets x 12, 16A sockets x 3).
It can remotely control the closing or disconnecting operation of the physical handle.
It can read data such as current, voltage, electricity consumption, and terminal temperature of electrical equipment.
It features short circuit protection, over-voltage protection, under-voltage protection, over-current protection, and over-temperature protection.
The product ID number is manually set without the need for a computer, facilitating on-site setup and integration.
High reliability, compact 4.5U design.
It can be integrated into powerful local and remote management platforms to achieve real-time interconnection and mutual control of multiple datasets.
Open third-party interfaces for customers to conduct secondary development.
Provide one USB 1.5A port and one TYPE-C port.
The timing function can be achieved by using the one-button (ON/OFF) switch on the panel to turn on/off channels 1\~11 in sequence.
The function keys on the panel can be locked/unlocked through the function lock switch on the panel to prevent accidental operation.
The front panel features an electronic screen for viewing current and voltage parameters.
It provides 1 PRE SYS, 2 IO, and 1 RS485 interfaces, allowing for the connection of third-party screens and pre/alarm devices.
It features over-temperature, over-current, over-voltage, and under-voltage alarm functions, and allows for the setting of warning and alarm messages through software.
Configuration
1. Core rack [198 x 487 x 282mm] x 1 (excluding lock ear, dimensions: 198 x 487 x 255mm)
2. Power conversion module [DC 12V (2P)] x 1
3. 320 reclosing Al air switch residual current circuit breaker [C40] x 2
4. 310 reclosing Al air-break circuit breaker [C20] x 9
5. Main switch [125A 2P] x 1
6. 300Al gateway WiFi x 1
7. RS series electronic expansion component module x 1
Product Features
1. Remotely control the connection or disconnection of physical handles
2. USB 1.5A, TYPE-C interface
3. Panel function lock
4. Electronic screen
Technical Specifications
| Input voltage | 220V 125A |
| Number of output channels | 11 sets (independent automatic recloser x 9, shared automatic recloser x 2) |
| Number of output sockets | 15 units (independent: 16A x 1, 10A x 8; shared: 16A x 2, 10A x 2; uninterrupted: 10A x 2) |
| Socket type | 10A multi-functional three-pin socket |
| Electronic interface | USB_5V1.5A x 1,TYPE-C_ 5V1.5A x 1,PRE SYS_IO OUT1/OUT2/A1/B1/12V/GND |
| Network interface | (Pre-alarm/Alarm) x 1, E.D.C_ x 3 (IO x 2, RS-485 third-party screen x 1) RJ45 100M x 1 set |
| Display screen | Character screen_47 x 28 6-digit digital tube x 1 set |
| Key electronic lock | Manual x 1 set |
| One-click switch | One set of physical buttons |
| Detection parameters | Current/Voltage/Power/Temperature/Electricity Consumption |
| Electronic operating voltage | DC12V |
| Communication method | RJ45 TCP/IP/RS-485/modbus x 1, WiFi x 1 |
| Electrical life | Mechanical: 6000T, Electronic: 10000T |
| Functional module | Configuration parameter/IP query and modification, local and remote automatic and manual reclosing operations x 2 groups (15 circuits),Real-time data can be queried for equipment number, |
| control, voltage, power, temperature N/L, current, and electricity consumption (up to 63 circuits), | |
| Protection against overcurrent, overtemperature, overvoltage, and undervoltage (≤63 channels),Timing_ every hour, every day, every month, every year, real-time control command_full operation command output. | |
| Usage environment Product dimensions (HxWxD) | Temperature range: -5°℃ ~ +40 °C, Humidity range: 0 ~ 90 % RH |
| Packaging size (HxWxD) / volume | Core rack [198 x 487 x 282mm] x 1 (excluding lock latch, 198 x 487 x 255mm) |
| 27.5 × 53.5 x 37.5cm / 0.055m³ | |
| Net weight | 12.1kg |
| Gross weight | 14.6kg |
RS14NC As ser ds n ea on ork for LED RS series WF14-way network version
Equipped with a programmable power management system, it can perform real-time data feedback monitoring and control. Adopting electrical standards, it features a professional electrical structure design. The single output is 16/30A, with a total output current of 125A. It includes 10 independent control multi-function sockets, 2 combined multi-function sockets, and 2 uninterrupted multi-function sockets (10A socket x 11, 16A socket x 3). There is also 1 USB 1.5A interface, 1 TYPE-C 1.5A interface, 1 PRE SYS, 2 IO, 1 RS485 interface, 1 manual electronic lock, 1 one-button timing master switch program function key, and an electronic display screen. Compared to traditional air switches, it provides better short circuit protection, leakage protection, and overcurrent protection. It comes with a Web interface for real-time querying of current, voltage, temperature, on/off status, circuit breaker, electricity consumption, and other data for each circuit. The Web function control gateway port is RJ45, and an optional APl control cascade port is RS485. It opens up a unique development interface for customers to conduct secondary development, perfectly integrating into various systems and platforms.
Product functional features
The single output is 16/30A, with a total output current of 125A. It features 10 independently controlled multi-function sockets, 2 combined multi-function sockets, and 2 uninterrupted multi-function sockets (10A socket x 11, 16A socket x 3).
It can remotely control the closing or disconnecting operation of the physical handle.
It can read data such as current, voltage, electricity consumption, and terminal temperature of electrical equipment.
It features short circuit protection, over-voltage protection, under-voltage protection, over-current protection, and over-temperature protection.
The product ID number is manually set without the need for a computer, facilitating on-site setup and integration.
High reliability, compact 4.5U design.
It can be integrated into powerful local and remote management platforms to achieve real-time interconnection and mutual control of multiple datasets.
Open third-party interfaces for customers to conduct secondary development.
Provide one USB 1.5A port and one TYPE-C port.
The timing function can be achieved by using the panel's one-button (ON/OFF) switch to turn on/off channels 1-10 in sequence.
The function keys on the panel can be locked/unlocked through the panel function lock switch to prevent accidental operation.
The front panel features an electronic display for viewing current and voltage parameters.
It provides one PRE SYS, two IO, and one RS485 interfaces, allowing for the connection of third-party screens and pre/alarm devices.
It features over-temperature, over-current, over-voltage, and under-voltage alarm functions, and allows for the setting of warning and alarm messages through software.
Configuration
1. Core rack [198 x 487 x 282mm] x 1 (excluding lock ear, dimensions are 198 x 487 x 255mm) 2. Power transformer module [DC 12V (2P)] x 1
3. 320 reclosing Al air switch residual current circuit breaker [C40]× 2
4. 310 recloser Al air-break circuit breaker [C20] x 8
5. Main switch [125A 3P] x 1
6. 300Al gateway WiFi x 1
7. RS series electronic expansion component module x 1
Product Features
1. Remotely control the connection or disconnection of physical handles
2. USB 1.5A, TYPE-C interface
3. Panel function lock
4. Electronic screen
5. Supports both single-phase and three-phase input
Technical Specifications
| Input voltage | 380V 125A |
| Number of output channels | 10 sets (independent automatic recloser x 8, shared automatic recloser x 2) |
| Number of output sockets | 14 units (independent: 16A x 1, 10A x 7; shared: 16A x 2, 10A x 2; uninterrupted: 10A x 2) |
| Socket type | 10A multi-functional three-pin socket |
| Electronic interface | USB_5V1.5A x 1, TYPE-C_ 5V1.5A x 1, PRE SYS_IO OUT1/OUT2/A1/B1/12V/GND (Pre/Alarm) x 1, E.D.C_ x 3 (IO x 2, RS-485 third-party screen x 1) |
| Network interface | RJ45 100M x 1 set |
| Display screen | Character screen_47 x 28 6-digit digital tube x 1 set |
| Key electronic lock | Manual x 1 set |
| One-click switch | One set of physical buttons |
| Detection parameters | Current/Voltage/Power/Temperature/Electricity consumption |
| Electronic operating voltage | DC12V |
| Communication method | RJ45 TCP/IP/RS-485/modbus x 1, WiFi x 1 |
| Electrical life Functional module | Mechanical: 6000T, Electronic: 10000T |
| Configuration_parameters/IP query and modification, local and remote_with automatic and manual reclosing operations x 2 groups (14 circuits),Real-time data can be queried for equipment number, control, voltage, power, temperature N/L, current, and electricity consumption (up to 63 circuits),Protection against overcurrent, overtemperature, overvoltage, and undervoltage (≤63 channels),Timing_every hour, | |
| Usage environment | every day, every month, every year, real-time control command_full operation command output. Temperature range: -5°C ~ +40 °C, Humidity range: 0 ~ 90% RH |
| Product dimensions (HxWxD) | Core rack [198 x 487 x 282mm] x 1 (excluding lock ear 198 x 487 x 255mm) |
| Packaging size (HxWxD) / volume | 27.5 × 53.5 × 37.5cm / 0.055m³ |
| Net weight | 12.1kg |
| Gross weight | 14.6kg |
RS12NBC RS ser ds 12- ay nn ork eor LED RS series WF12-way network version
Equipped with a programmable power management system, it enables real-time data feedback monitoring and control. Adopting electrical standards, it features a professional electrical structure design. The system boasts a single output of 16/30A, with a total output current of 125A. It includes 9 independent control multi-function sockets, 1 combined multi-func tion socket, and 2 uninterrupted multi-function sockets (10A socket x 10, 16A socket x 2). Additionally, it features 1 USB 1.5A interface, 1 TYPE-C 1.5A interface, 1 PRE SYS, 2 IO, 1 RS485 interface, 1 manual electronic lock, 1 one-button timing master switch program function key, and an electronic display screen. Compared to traditional air switches, it offers superior short circuit protection, leakage protection, and overcurrent protection, and also incorporates an alarm function. Equipped with a Web interface, it allows real-time querying of data such as current, voltage, temperature, on/off status, circuit breakers, and electricity consumption for each circuit. The Web function control gateway port is RJ45. It provides a unique development interface for customers to conduct secondary development, seamlessly integrating into various systems and platforms
Product functional features
The single output is 16 and 30A, with a total output current of 125A. It comes with 9-way independent control multi-function sockets, 1-way combined multi-function socket, and 2-way uninterrupted multi-function sockets (10A sockets x 9, 16A sockets x 3).
It can remotely control the closing or disconnecting operation of the physical handle.
It can read data such as current, voltage, electricity consumption, and terminal temperature of electrical equipment.
It features short circuit protection, over/under voltage protection, overcurrent protection, and overtemperature protection.
The product ID number is manually set without the need for a computer, facilitating on-site setup and integration.
High reliability, compact 4.5U design.
It can be integrated into powerful local and remote management platforms to achieve real-time interconnection and mutual control of multiple datasets.
Open third-party interfaces for customers to conduct secondary development.
Provide one USB 1.5A interface and one TYPE-C interface.
The timing function can be achieved by using the panel's one-button (ON/OFF) switch to activate/deactivate channels 1 to 9 in sequence.
The function keys on the panel can be locked/unlocked through the panel function lock switch to prevent accidental operation.
The front panel features an electronic screen for viewing current and voltage parameters.
It provides 1 PRE SYS, 2 IO, and 1 RS485 interfaces, allowing for the connection of third-party screens and pre-alarm/alarm devices.
It features over-temperature, over-current, over-voltage, and under-voltage alarm functions, and allows for the setting of warning and alarm messages through software.
Configuration
1. Core rack [198 x 487 x 282mm] x 1 (Excluding lock ear, dimensions are 198x 487 x 255mm)
2. Power transformer module [DC 12V (2P)] x 1
3. 320 reclosing Al air switch residual current circuit breaker [C40] x 1
4. 310 reclosing Al air-break circuit breaker [C20] x 8
5. Main switch [125A 3P] x 1
6. 300Al gateway WiFi x 1
7. 300 guide-rail type Al alarm x 1
8. RS series electronic expansion component module x 1
Product Features
1. Remotely control the connection or disconnection of physical handles
2. USB 1.5A, TYPE-C interface
3. Panel function lock
4. Electronic screen
5. Supports both single-phase and three-phase input
6. Alarm function
Technical Specifications
| Input voltage | 380V 125A |
| Number of output channels | 9 sets (independent automatic recloser x 8, shared automatic recloser x 1) |
| Number of output sockets | 12 units (independent: 16A x 2, 10A x 6; shared: 16A x 1, 10A x 1; uninterrupted: 10A x 2) |
| Socket type | 10A multi-functional three-pin socket |
| Electronic interface | USB_5V1.5Ax1,TYPE-C_5V1.5A x 1,PRE SYS_IO OUT1/OUT2/A1/B1/12V/GND (Pre/Alarm) x 1, E.D.C_ x 3 (IO x 2, RS-485 third-party screen x 1) |
| Network interface | RJ45 100M x 1 set |
| Display screen | Character screen_47 x 28 6-digit digital tube x 1 set |
| Key electronic lock | Manual x 1 set |
| One-click switch | 1 set of physical buttons |
| Detection parameters | Current/Voltage/Power/Temperature/Electricity consumption |
| Electronic operating voltage | DC12V |
| Communication method | RJ45 TCP/IP/RS-485/modbus x 1, WiFi x 1 |
| Electrical life | Machinery: 6000T, Electronics: 10000T |
| Functional module | Configuration parameters/IP query and modification, local and remote_with automatic and manual reclosing operations x 2 groups (12 circuits),Real-time data can be queried for equipment number, control, voltage, power, temperature N/L, current, and electricity consumption (up to 63 circuits), Protection against overcurrent, overtemperature, overvoltage, and undervoltage (≤63 channels),Timing_ |
| Usage environment | every hour, every day, every month, every year, real-time control instruction_full operation instruction output Temperature range: -5C ~ +40 C, Humidity range: 0 ~ 90% RH |
| Product dimensions (HxWxD) Packaging size (HxWxD) / volume | Core rack [198 x 487 x 282mm] x 1 (excluding lock latch, 198 x 487 x 255mm) |
| 27.5 × 53.5 × 37.5cm / 0.055m³ | |
| Net weight | 12.1kg |
| Gross weight | 14.6kg |
The industry's smallest loT power management terminal with detection function for current and voltage data analysis is designed in a 19-inch standard 1U cabinet. It provides 8 power switch channels, with a maximum current of 10A per channel and a total input current capacity of 38A. Additionally, it offers 1 uninterrupted power outlet and 1 USB output port with a current of 1.5A. The front panel features a 1-inch LCD high-definition digital display screen, allowing users to view circuit parameters. It is equipped with 4 specific EMI filters and comes with a powerful local and remote management platform, enabling real-time data exchange and control. Specific permission management ensures higher efficiency and information security.
Product functional features
The front panel provides a USB output port, capable of delivering 1.5A.
The front panel features a liquid crystal display (LCD) screen for viewing circuit parameters.
The maximum current for a single channel is 10A, and the total input current capacity is 38A.
Provide 8 power switch channels, with the status of the 8-channel switches displayable on the panel.
The system can be activated/deactivated through a one-button (ON/OFF) switch on the panel, allowing for the sequential activation/deactivation of channels 1 to 8, thus achieving the timing function.
The panel buttons can be locked and unlocked through software.
It provides an RS232 input interface, allowing connection to a computer and a central control system.
It provides an RJ45 network input interface, allowing connection to a local area network or an external wide area network.
It provides an adjacent port interlocking function, which can be used for the lifting and opening/closing of devices such as projection lifting screens, lifting frames, and electric curtains controlled by central control.
Provides a delay operation function with a delay time of up to 15 hours.
19-inch standard cabinet 1U design.
Provide one uninterrupted power outlet.
Equipped with four specific EMI filters, it is more suitable for complex audio and video applications in various industries, providing stable and quiet power output.
It features a universal socket and a safety threshold design for the socket.
Equipped with a powerful local and remote management platform, it enables real-time interconnection and mutual control of multiple datasets.
Specific permission management ensures higher efficiency and information security.
Configuration
1. LCD high-definition digital display screen
2.1 uninterrupted power outlet
3. Interlock function
4. Time delay operation function
6. USB fast charging function
5.4 EMI filters
Technical Specifications
| Input power | 110V~ 230V 50/60Hz |
| Number of output channels | Route 8 |
| Power input interface | Three-core coaxial cable_3 x 4mm² |
| Power output interface | Independent x 8, uninterrupted x 1 |
| Filter | 4-way |
| Socket type | 10A multi-functional three-pin socket |
| Electronic interface | USB_5V1.5A x 1, RS232_TXD/RXD/GND x 1, RS485_GND/12V/A/B, PRE SYS_IO OUT1 OUT2 OUTY OUTR 12V GND (IO, Pre/Alarm) x 1, |
| Network interface | RJ45 100M x 1 set |
| Display screen | LCD screen_LCD x 1 set, character screen_digital tube x 1 set |
| Toggle button | One-button switch x 1 set, single channel x 8 sets |
| LED indicator light | One-button switch x 1 set, single channel x 8 sets |
| Relay | 30A/250V AC nom |
| Communication method | RJ45 TCP/IP/RS-485/RS-232/modbus x1, WiFix1 |
| Functional module | Network settings_Search device IP, set IP parameters, TCP/UDP/serial port connection, real-time data query_Open/close control; Real-time display of temperature, current, voltage, power, historical electricity consumption, alarm frequency, and status for each circuit x 8 circuits; Relay_delay, restart, multi-port setting and delay, adjacent two-way interlock, timing fully open and fully closed x 8-way; Server_writing and querying of domain name, port, topic, username, and password, protection_overcurrent, overtemperature, overvoltage, undervoltage x 8-channel pre-alarm/alarm mode_alarm instruction push (serial port, UDP, TCP, MQTT) alarm sending frequency; Status update frequency, external alarm light mode, device panel lock on/off, buzzer on/off x 6 sets; Real-time control command_full operation |
| Product dimensions (HxWxD) | Temperature range: -5C ~ +40 °C, Humidity range: 0 ~ 90%RH 45 x 483 x 390mm (excluding lock latch, 45 x 483 x 340mm) |
| Packaging size (HxWxD) / volume | 11 x 57.5 x 42cm / 0.027m³ |
| Net weight | 5.25kg |
| Gross weight | 6.5kg |
RH11NC Al power distribution detector PZ box for LED RH series 11-way PZ circuit box
Equipped with a programmable power management system, it can perform real-time data feedback monitoring and control. Adopting electrical standards, it features a professional electrical structure design. The single output is 16/30A, with a total output current of 125A and 11 air switches. Compared to traditional air switches, it provides better short-circuit protection, leakage protection, and over-current protection. Equipped with a Web interface, it allows real-time query of current, voltage, temperature, on/off status, circuit breaker, electricity consumption, and other data for each circuit. The Web function control gateway port is RJ45, and an optional APl control cascade port is RS485. It opens up a unique development interface for customers to conduct secondary development, perfectly integrating into various systems and platforms.
Inlet and outlet hole positions of the box body
OOOOCOO
Product functional features
It provides 11 single-channel outputs of 16/30A, with a total output current of 125A.
It can remotely control the closing or disconnecting operation of the physical handle.
It can read data such as current, voltage, electricity consumption, and terminal temperature of electrical equipment.
It features overload protection, short circuit protection, over-voltage and under-voltage protection, spark protection, and over-temperature protection.
The product ID number is manually set without the need for a computer, facilitating on-site setup and integration.
The product is scalable and can achieve additional functions such as leakage protection and power expansion.
The guide rail busbar connection is stable, reliable, and eliminates the hassle of connecting weak electrical wires.
Elegant appearance, high reliability, and compact design.
■ It can be integrated into a powerful management platform, enabling real-time data exchange and mutual control among mobile phone terminals, PC terminals, and cloud platforms.
Open third-party interfaces for customers to conduct secondary development.
Configuration
1. Core box [273 x 534 x 88mm] x 1
(Including panel dimensions of 278 x 537 x 90mm)
2. Main switch [125A 3P] x 1
3. Power transformer module [DC 12V (2P)] x 1
4. 300Al gateway WIFI x 1
5. 320 reclosing Al air switch residual current circuit breaker [C40] × 2
6. 310 reclosing Al air-break circuit breaker [C20] x 9
Product Features
1. 100A main circuit breaker, 2 circuits of C40, 9 circuits of C20
2. WIFI gateway
3. It can be integrated into a powerful management platform to achieve real-time interconnection and mutual control of multiple data across mobile phone terminals, PC terminals, and cloud platforms
Technical Specifications
| Input voltage | 380V 125A |
| Number of output channels | 11 (C40 × 2, C20 × 9) |
| Electronic interface | RS-485 x 1 |
| Network interface | RJ45 100M x 1 set |
| Detection parameters | Current/Voltage/Power/Temperature/Electricity Consumption |
| Electronic operating voltage | DC12V |
| Communication method | RJ45 TCP/IP/RS-485/modbus x 1, WiFi x 1 |
| Electrical life | Mechanical: 10,000T, Electronic: 60,000T |
| Functional module | Query and modification of configuration parameters/IP Local and remote automatic and manual reclosing operations, with 2 setsReal-time data can be queried for equipment number, control, voltage, |
| power, temperature (N/L), current, and electricity consumption (up to 63 circuits) | |
| Protection against overcurrent, overtemperature, overvoltage, and undervoltage (≤63 channels) Timing: hourly, daily, monthly, annually | |
| Real-time control instructions, fully operational instruction output | |
| Usage environment | Temperature range: -5C~ +40°C, Humidity range: 0 ~ 90%RH |
| Product dimensions (H x W x D) | 273 x 534 x 88mm (including the panel, 278 x 537 x 90mm) |
| Packaging size (H x W x D) / volume 17.5 x 62.5 x 35.5cm / 0.039m³ | |
| Net weight | 6.3kg |
| Gross weight | 8.5kg |
RH19NC Al power distribution detector PZ box for LED RH series 19-way PZ circuit box
Equipped with a programmable power management system, it can monitor and control real-world data feedback. Adopting electrical standards, it features a professional electrical structure design. The single output is 16/30A, with a total output current of 125A and 19 air switches. Compared to traditional air switches, it provides better short circuit protection, leakage protection, and overcurrent protection. Equipped with a Web interface, it allows real-time query of current, voltage, temperature, on/off status, circuit breaker, electricity consumption, and other data for each circuit. The Web function control gateway port is RJ45, and an optional API control cascade port is RS485. It opens up a unique development interface for customers to conduct secondary development, perfectly integrating into various systems and platforms.
Product functional features
It provides 19 single-channel outputs of 16/30A, with a total output current of 125A.
It can remotely control the closing or disconnecting operation of the physical handle.
It can read data such as current, voltage, electricity consumption, and terminal temperature of electrical equipment.
It features overload protection, short circuit protection, over-under voltage protection, spark protection, and over-temperature protection.
The product ID number is manually set without the need for a computer, facilitating on-site setup and integration.
The product is scalable and can achieve additional functions such as leakage protection and power expansion.
The guide rail busbar connection is stable, reliable, and eliminates the hassle of connecting weak electrical wires.
Elegant appearance, high reliability, and compact design.
It can be integrated into a powerful management platform, enabling real-time data exchange and mutual control among mobile phone terminals, PC terminals, and cloud platforms.
Open third-party interfaces for customers to conduct secondary development.
Configuration
1. Core box [456 x 425 x 88mm] x 1 (Including panel dimensions of 458 x 428 x 90mm)
2. Main switch [125A 3P] x 1
3. Power conversion module [DC 12V (2P)] x 1
4. 300Al gateway WIFI x 1
5. 320 reclosing Al air switch residual current circuit breaker [C40]× 4
6. 310 reclosing Al air-break circuit breaker [C20] x 15
Product Features
1. 125A main switch, 4 circuits of C40, 15 circuits of C20
2. WIFI gateway
3. It can be integrated into a powerful management platform, enabling real-time data exchange and mutual control among mobile phone terminals, PC terminals, and cloud platforms
Technical Specifications
| Input voltage | 380V 125A |
| Number of output channels | 19 (C40 × 4, C20 × 15) |
| Electronic interface | RS-485 x 1 |
| Network interface | RJ45 100M x 1 set |
| Detection parameters | Current/Voltage/Power/Temperature/Electricity consumption |
| Electronic operating voltage | DC12V |
| Communication method | RJ45 TCP/IP/RS-485/modbus x 1, WiFi x 1 |
| Electrical life | Mechanical: 10,000T, Electronic: 60,000T |
| Functional module | Query and modification of configuration parameters/IP; Local and remote automatic and manual reclosing operations, with 2 sets Real-time data can be queried for equipment number, control, voltage, power, temperature (N/L), current, and electricity consumption (≤63 circuits);Protection against |
| overcurrent, overtemperature, overvoltage, and undervoltage (≤63 channels) Timing: hourly, daily, monthly, annually Temperature range: -5°C ~ +40°C, Humidity range: 0~ 90%RH | |
| Usage environment | Real-time control instructions, full operation instruction output |
| Product dimensions (H x W x D) | 456 x 425 x 88mm (including the panel, which measures 458 x 428 x 90mm) |
| Packaging size (H x W x D) / volume 17.5 x 53.5 x 50.5cm / 0.047m³ | |
| Net weight 8.8kg | |
| Gross weight | 11kg |
Al power distribution detection termina RHP27-160AC cabinet for LED RHP Series
The intelligent power distribution system provides a power management product that is loT-enabled, controllable, high in safety factor, fast in response, high-power, and capable of independent control for multiple circuits. It features a programmable power manager system for real-time data feedback monitoring and control, adheres to electrical standards, and employs a professional electrical structure design. The structure is made of 304 stainless steel, which is one of the most widely used chromium-nickel stainless steels. It exhibits excellent corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. It also boasts good hot workability such as stamping and bending, without experiencing heat treatment hardening. The single-circuit output is 16 and 30A, with a total output current of 160A. The RHP27-160A features 27-circuit independent control air switches and a high-power main switch. Compared to traditional air switches, it offers superior short-circuit protection, leakage protection, and over-current protection. It comes with a Web interface for real-time querying of current, voltage, temperature, on/off status, circuit breaker, power consumption, and other data for each circuit. The Web function control gateway port is RJ45, and an optional APl control cascade port is RS485. It provides a unique development interface for customers to conduct secondary development, seamlessly integrating into various systems and platforms.
Product functional features
It provides 27 single-channel outputs with a current capacity of 16/30A, with a total output current of 160A.
It can remotely control the closing or disconnecting operation of the physical handle.
It can read data such as current, voltage, electricity consumption, and terminal temperature of electrical equipment.
It features overload protection, short circuit protection, over-under voltage protection, spark protection, and over-temperature protection.
The product ID is manually set without the need for a computer, making it convenient for on-site setup and integration.
■The product is scalable and can achieve additional functions such as leakage protection and power expansion.
The guide rail busbar connection is stable, reliable, and eliminates the hassle of connecting weak electrical wires.
Elegant appearance, high reliability, and compact design.
It can be integrated into a powerful management platform, enabling real-time data exchange and mutual control across mobile phone terminals, PC terminals, and cloud platforms.
Open third-party interfaces for customers to conduct secondary development.
The front panel features a current and voltage display meter, allowing users to view individual current and voltage parameters.
It features over-temperature, over-current, over-voltage, and under-voltage alarm functions, and allows for the setting of early warning and alarm messages through software.
The structural material is 304 stainless steel, which exhibits excellent corrosion resistance, heat resistance, low-temperature strength, and mechanical properties;
It has good hot workability, such as stamping and bending, and does not exhibit hardening due to heat treatment.
Configuration
1. One set of electrical cabinet x 1, dimensions: with edging:
818x621x150(mm);Without edging: 770x570x150(mm)
2. Main switch [200A 4P] x 1
3. Power conversion module [DC 12V (2P)] x 2
4. 300Al gateway WIFI x 1
5. 320 reclosing Al air switch residual current circuit breaker [C40] × 12
6. 310 reclosing Al air-break circuit breaker [C40] x 3
7. 310 reclosing Al air-break circuit breaker [C20] x 6
8. Current and voltage display meter
Product Features
1.200A main circuit breaker, 15 circuits of C40, 6 circuits of C20
2. WIFI gateway
3. Display meter with current and voltage
4. It can be integrated into a powerful management platform, enabling real-time data exchange and mutual control across mobile phone terminals, PC terminals, and cloud platforms
Technical Specifications
| Input voltage | 380V 160A |
| Number of output channels | 27 (C40× 3, C20 × 24) |
| Electronic interface | RS-485 x 1 |
| Network interface | RJ45 100M x 1 set |
| Current and voltage display screen | 96 x 96 digital display screen x 1 |
| Detection parameters | Current/voltage/power/temperature/electricity consumption |
| Electronic operating voltage | DC12V |
| Communication method | RJ45 TCP/IP/RS-485/modbus x 1, WiFi x 1 |
| Electrical life | Machinery: 10,000T, Electronics: 60,000T |
| Structural materials | 304 stainless steel |
| Functional module | Configuration parameters/IP query and modification;Local and remote_with automatic and manual reclosing operations x 2 sets;Real-time data available for query: device number, control, voltage, |
| power, temperature (N/L), current, electricity consumption (up to 63 circuits) | |
| Protection against overcurrent, overtemperature, overvoltage, and undervoltage (≤63 channels) | |
| Timing_Every hour, every day, every month, every year | |
| Real-time control command_instruction output for full operation | |
| Product dimensions (H x W x D) | Temperature range: -5°℃~ +40°C, Humidity range: 0 ~ 90%RH |
| Without edging: 770 x 570 x 150 mm, with edging: 818 x 621 x 150 mm | |
| Packaging size (H x W x D) / volume | 91 x 71.5 × 21.5cm / 0.140m3 |
| Net weight | 30.5kg |
| Gross weight | 34kg |
The intelligent power distribution system provides a power management product that is loT-enabled, controllable, high in safety factor, fast in response speed, high-power, and capable of independent control for multiple circuits. It features a programmable power manager system for real-time data feedback monitoring and control, adopts electrical standards, and has a professional electrical structure design. The structure is made of 304 stainless steel, which is the most widely used chromium-nickel stainless steel. It has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. It has good hot workability such as stamping and bending, without heat treatment hardening. The single-circuit output is 16 and 30A, with a total output current of 200A. The RP21H-200A has 21 independent control air switches and a high-power main switch. It provides better short-circuit protection, leakage protection, and over-current protection than traditional air switches. It comes with a Web interface that allows real-time query of each circuit's current, voltage, temperature, on/off status, circuit breaker, power consumption, and other data. The Web function control gateway port is RJ45, and an optional APl control cascade port is RS485. It opens up a unique development interface for customers to conduct secondary development, perfectly integrating into various systems and platforms.
Product functional features
Provide 21 single-channel outputs with a current capacity of 16/30A, with a total output current of 200A;
It can remotely control the closing or disconnecting operation of the physical handle;
It can read data such as current, voltage, electricity consumption, and terminal temperature of electrical equipment;
■ It features overload protection, short circuit protection, over/under voltage protection, spark protection, and over-temperature protection;
The product ID number is manually set without the need for a computer, facilitating on-site setup and integration;
The product is scalable and can achieve additional functions such as leakage protection and power expansion;
Elegant appearance, high reliability, and compact design;
■It can be integrated into a powerful management platform to achieve real-time inter-control of multi-data across mobile phone terminals, PC terminals, and cloud platforms;
Open third-party interfaces for customers to conduct secondary development;
The front panel provides a current and voltage display meter to view individual current and voltage parameters;
It features over-temperature, over-current, over-voltage, and under-voltage alarm functions, and allows for the setting of early warning and alarm messages through software.
Configuration
1. One set of electrical cabinet x 1, dimensions: with edging:
818x621x150(mm);Without edging: 770x570x150(mm)
2. Main switch [200A 4P] x 1
3. Power conversion module [DC 12V (2P)] x 2
4. 300Al gateway WIFI x 1
5.320 reclosing Al air switch residual current circuit breaker [C40] × 12
6. 310 reclosing Al air-break circuit breaker [C40] x 3
7. 310 reclosing Al air-break circuit breaker [C20] x 6
8. Current and voltage display meter
Product Features
1.200A main circuit breaker, 15 circuits of C40, 6 circuits of C20
2. WIFI gateway
3. Display meter with current and voltage
4. It can be integrated into a powerful management platform, enabling real-time data exchange and mutual control across mobile phone terminals, PC terminals, and cloud platforms
Technical Specifications
| Input voltage | 380V 200A |
| Number of output channels | 21 (C40 × 15, C20 × 6) |
| Electronic interface | RS-485 x 1 |
| Network interface | RJ45 100M x 1 set |
| Current and voltage display screen | 96 x 96 digital display screen x 1 |
| Detection parameters | Current/Voltage/Power/Temperature/Electricity Consumption |
| Electronic operating voltage | DC12V |
| Communication method | RJ45 TCP/IP/RS-485/modbus x 1, WiFi x 1 |
| Electrical life | Machinery: 10,000T, Electronics: 60,000T |
| Structural materials Functional module | 304 stainless steel |
| Configuration parameters/IP query and modification; Local and remote_with automatic and manual reclosing operations x 2 sets; Real-time data available for query: device number, control, voltage, power, temperature (N/L), current, electricity consumption (up to 63 circuits); Protection against | |
| overcurrent, overtemperature, overvoltage, and undervoltage (≤63 channels); Timing_Every hour, every day, every month, every year Real-time control command_instruction output for full operation | |
| Usage environment | Temperature range: -5°C~ +40°C, humidity range: 0~ 90%RH |
| Product dimensions (H x W x D) | Without edging: 770 x 570 x 150 mm, with edging: 818 x 621 x 150 mm |
| Packaging size (H x W x D) / volume | 91 x 71.5 x 21.5cm / 0.140m³ |
| Net weight | 32.18kg |
| Gross weight | 35.68kg |
RBGL18C loT AV device power management terminal RBGL series 18-way (manual emergency backup version)
The 18-channel programmable power management control system features a manual emergency bypass air switch for each output circuit, utilizing electrical standards and professional electrical structure design. The structure is constructed from 304 stainless steel, which is one of the most widely used chromium-nickel stainless steels, boasting excellent corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. It exhibits good hot workability such as stamping and bending, without experiencing heat treatment hardening. The single output is 16A/30A, with a total output current of 125A. The system incorporates a built-in logic host equipped with a Web interface, allowing real-time monitoring of data such as current, voltage, temperature, on/off status, short circuit, and electricity consumption for each channel. The control editing port is an RJ45 network port.
Product functional features
Provide multiple series versions of emergency backup and non emergency backup, supporting single circuit 16A/30A/32A, etc., and supporting total current 80A/100A/125A, etc.
Realize fast installation and make it easier to connect the upper and lower ends of the product internally.
Support centralized and distributed management for multiple loT air switches, gateways, and cascading modules.
Provide the function of miniature circuit breaker.
It can remotely and quickly control the connection or disconnection of electrical equipment.
It can read data such as current, voltage, electricity consumption, and terminal temperature of electrical equipment.
It features overload protection, short circuit protection, over/under voltage protection, spark protection, and
over-temperature protection.
It features emergency backup and innovatively adds a bidirectional circuit for safe electronic device switching (limited to emergency backup models).
The product features a status indication function, which displays the device's connection, disconnection, and fault conditions in real time.
The product ID number is manually set without the need for a computer, facilitating on-site setup and integration.
The product is scalable and can achieve additional functions such as leakage protection and power expansion.
Open third-party interfaces for customers to conduct secondary development.
The guide rail busbar connection is stable, reliable, and eliminates the hassle of connecting weak electrical wires. High reliability, compact design.
Organize the wire slot to facilitate the binding and securing of internal and external wires, solving issues such as messy internal wiring and susceptibility to loosening. The visualization system provides a clear and immediate view of the curves representing the changes in voltage, current, and temperature of each air switch over the course of a day.
The system displays various parameters such as current, voltage, and status of the loT air switch in real time.
The structural material, 304 stainless steel, offers excellent corrosion and heat resistance, low-temperature strength, mechanical properties, and hot workability (e.g., stamping, bending) without hardening from heat treatment.
Configuration
1. Electrical box casing [770 x 570 x 150mm] x 1
2. Power supply unit [DC 24V] x 1
3. Cascade interface x 1
4. Smart air switch [C20] x 17 + [C40] x 1
5. Traditional residual current circuit breaker [20A] x 17 + [40A] x 1
6. Traditional circuit breaker [25A] x 17 + [63A] x 1
7. Schneider circuit breaker [3P 100A] x 1
8. Smart gateway x 1
Product Features
1. Remotely control the closing or opening of electrical
2. Read data such as current, voltage, and terminal temperature
3. Emergency backup
Technical Specifications
| input voltage | 380V 125A |
| number of output channels | 18-way (30A x1 + 16A x17) with manual emergency backup |
| network interface | RJ45 100M×1 set |
| detection parameters | Current/voltage/power/temperature/electricity consumption |
| Electronic operating voltage | DC24V |
| communication method | RJ45 TCP/IP/RS-485/modbus x1, WiFi x1 |
| Structural materials | 304 stainless steel |
| electrical life | Mechanical: 10,000T, Electronic: 60,000T |
| Overall dimensions (L×W×D) | Without edging: 770 x 570 x 150mm, with edging: 818 x 621 x 150mm |
| Carton size (L×W×D) / volume | 910× 720×230mm/0.15m³ |
| net weight | 36.5kg |
| gross weight | 40kg |
| Net weight of carton (including parts) | 3.5kg |
Intelligent Power Management System
Integrated operation and maintenance management platform (PC version) (subject to charge)
The powerful visual equipment management and operation platform provides a comprehensive overview, serving as the brain of the integrated power operation command center. Its modular design allows users to leverage more personalized applications, while its secure operation and maintenance management mechanism provides peace of mind for users. By combining traditional air switches with loT technology, remote control and monitoring of electrical equipment can be achieved through network connections. This technology not only enhances the convenience and safety of power management but also brings numerous advantages and application scenarios.
Mobile management platform (mobile mini-program) (subject to charge)
Receiving protection and alarm notifications allows users to make advance predictions about equipment health, enabling quick dispatch and reception in mobile power management, thus making mobile power command and management a reality. It also features personalized operation settings, providing users with multiple options.
RS host computer software
Comprehensive software functionality allows for basic settings and backend configuration of air switches; independent control of air switch on/off, one-click full on/off timing control, and scheduled on/off switching of air switches can be achieved within the software interface; the software provides real-time monitoring of air switch voltage, current, and temperature, with the ability to set various numerical thresholds to implement pre-alarm and alarm functions.
Security settings page
Set the pre-alarm and alarm values for various devices, including over-temperature alarm (warning), over-temperature action alarm (alarm), over-current alarm, over-current action alarm, over-voltage alarm, over-voltage action alarm, under-voltage alarm, as well as enabling or disabling the over-temperature protection, over-current protection, over-voltage protection, and under-voltage protection for each device.
Device control page
Real-time detected voltage, power, neutral wire temperature, live wire temperature, current, and cumulative current (electricity consumption) can be controlled by clicking the "ON" or "OFF" button on each device bar for independent switch control of the device air switch. The "Sequential Full On Button" and "Sequential Full Off Button" at the bottom allow for one-click full on and one-click full off control of the device air switch
Network settings page
The page allows for the setting of the address, gateway, subnet mask, and bit rate of the connected devices.
Gateway settings page
You can access the air switch backend server to set and modify the air switch configuration.
Timing settings page
The air switch can be set to turn on and off at specific times.
CinemaKing Website
