该页无缩略图
NEXT-GEN ELDCOMPLIANCE AND SAFETY SOLUTION
Ensure Compliance,Enhance Safety, and Boost Operational Efficiency
HOS
T
HOS Regulation Support
Diagnostic Trouble CodeReading
Predictable Maintenanc
JimiloT
KD031 CAN Data Box
The KDo31 has a compact design and is plug-and-play. It supports CAN data reading with the SAE J1939 protocol and canprovide \mathsf { B } { + } , GND,and ACC for peripherals (such as DVRs trackers etc.) while also providing CAN data through a serial port.An additional serial port is reserved for connecting external sensors.
Logistics Service
Vehicle Rental
CANDiagnostics
Reads CANdata forcommercialvehicles supporting both J1939 and OBDll protocols.
Power Supplyand ACC
Provides power and accurate ACC signals to peripherals (such as DVRs, trackers, etc.),simplifying peripheral installation.
2\*USART
Twoserial ports (TTL) are reserved to provide CAN datato peripherals viatheserial portortoconnect to RFID, sensors etc.
Firmware Upgrade Supports FOTA and local serial port upgrades.
| StandardConfiguration | |||
| Power | Interface | ||
| Input voltage | 9-33VDC | LED indication Blue (Status) | |
| Working modes | Working Mode (lgnition On), Sleep Mode (lgnition Off) | Connection | OBDll or J1939 9-pin port to 8-pin connector (PH3.0,2*4-Pin) |
| Output port | 10-Pin (PH3.0,2*5-Pin) | ||
| Feature | Operating environment | ||
| Sensor | Accelerometer | Operatingtemperature -20℃ to +70℃ | |
| Mount method | Plug-and-Play | Operating humidity 5%~95% (Non-condensing) | |
| Bluetooth | BLE 5.1 (Optional) | ||
| Can be externally connected through the | Physical specification | ||
| RFID | reserved serial port | Dimensions (LxWxH) 100x27x19mm | |
| Certification (pending) | FCC,CE | Weight 40g | |
| Standard Packing |
| KD031 unit |
| OBDIl cable |
Optional Configuration\*
| Bluetoothmodule |
| Nor flash |
| J1939 9-pin to OBDll cable |
| Adaptercable |
JimiloT
KD032 Electronic Logging Device
The KDo32 features a compact design and is plug-and-play. It supports CAN data reading for SAE J1939, J1587,and EOBD protocols.Additionallyit supports Bluetooth connectivity for transmitting ELD device data and can provide \mathsf { B } { + } , GND,and ACC to peripherals (such as DVRs and trackers)，as well as CAN data via a serial port.
Logistics Service
CANDiagnostics
Reads vehicle CAN data,supporting Jl939, J1587, and EOBD protocols.
回
GPS Positioning
Features a built-in positioningmodulewith a high-gain ceramic antenna.
园
ELD
Supports functional requirementsofNorthAmerican ELD devices.
Firmware Upgrade Supports FOTA and local serial port upgrades.
Power Supply and ACC
Provides powerand precise ACC signals for peripherals (such as DVRs and trackers),simplifying peripheral installation.
| StandardConfiguration | |||
| Power | Interface | ||
| Input voltage | 9-33VDC | LED indication | 3LEDs: Blue (Bluetooth), Green (GNSS),Orange (OBD) |
| Output voltage1 | 9-33VDC,3A | Connection | OBDIl and J1939 9P to 10PMolex-3.0 connector |
| Output voltage2 | 5VDC,0.3A | Output port | 10-Pin (PH3.0, 2*5-Pin) |
| Working modes | Working Mode (lgnition On) Sleep Mode (lgnition Off) | Bluetooth antenna GNSS antenna | PCB onboard antenna |
| Feature | Operating environment | ceramic antenna (25*25*4mm) | |
| GNSS | GPS | Operating temperature-20℃ to +85℃ | |
| Mount method | Plug-and-Play | Operating humidity 5%~95% (Non-condensing) | |
| Bluetooth | BLE 5.1 | ||
| Memorycapacity | 16MB Nor Flash | Physical specification | |
| Certification (pending) | FCC,CE | Dimensions (LxWxH) 70x50x20mm | |
| Weight 60g | |||
Standard Packing
| KD032 unit | |
| Maincable | 1 |
Optional Configuration\*
3D/6D sensor
Dptional Configuration required to be customized or purchased separately.
JimiloTLinkedln
us.jimiiot.com
JimiloT Making Connections Simpler
