ZANUAGRI

BETTER FOR YOUR LIFE

BX62RS

AGFP

ZAG

RC01

AGMH

BHSM

ZANOAGRI

ABOUT US

Changzhou ZANO machinery co ltd , is specialized in developing and manufacturing high quality tools and compact industry machinery,

which equipping for various wheel tractor, wheel loader and slippage loader

Our products focus on mower, wood chipper, PTO excavator, rotary cultivator and variety of compact multi-function excavators

ZANOAGRI

Located in standardized workshop, which occupied 12,000 square meters, all of our products are designed by professional engineers based on Europe and American safety standard. Meanwhile, we have experienced employees and advanced equipment to ensure high quality. We mainly export to Europe and Americanmarket, while CE certificate always for products to Europe customers.

We make all our endeavor to achieve "BETTER FOR YOUR LIFE". By continuous provide reliable, safe and multi-functional products, more convenience and quality life will be brought to
our customers.

Remote control mower RC

The RC-01 is developed in close cooperation with professional users. It ensures the best working conditions and enables them to deliver the best result. Every time.

With its low height and low center of gravity the RC-01 handles mowing, stump grinding and snow clearing on slopes on up to 50 degrees without a problem.

RC-01 is the optimal alternative for handheld tools, if you want to avoid injuries of your back, hips and ankles. It also createsa good and safe work environment.

With a working width on up to 1350 mm (rotary mower)and a 23 HP engine, the RC-01 handles the work on both big and difficult to reach areas. RC-01 is the most compact of its class of remote controlled tool carrier which makes it capable of working unhindered on very narrow and impassable places. The engine lies in the chassis so that the compact dimensions are kept, and even the most narrow places can be worked.

Wood chipper BX42

The BX-42 is a very simple and at the same time efficient and sturdy wood chipper.

The wood chipper comes delivered complete with P.T.O. A shear pin has also been built into one side of the P.T.O., which is a safety precaution as it serves as a predetermined breaking point in the event of blockages or overloading. This means that even larger tractors with more than100 HP can be used with no problem. You should have an engine power output of at least 25-30 HP.The P.T.O. must have a speed of 540 rpm.

The BX-42 has a very sturdy finish! The material strength of the sheet metal in the weight-bearing area are 10 and 5mm. At the hopper and the non-weight-bearing parts it is 2 mm.

The unit has been constructed in a very maintenance-friendly way; you can open the flywheel cover completely by unscrewing just one screw, giving you access to the 4cutting blades. These cutting blades are double-sided, so that they can be turned around if required. The flywheel has a net-weight of 50 kg and has fitted wings,which produces the incredibly powerful suction which ultimately expels the chippings out of the chute. Thanks to this powerful suction, a blockage of the shredding unit is virtually impossible.

Technical specifications:
Tractor power: min. 25-30 HP
Mounting: 3 point linkage from Cat. I upward
P.T.O: Included in delivery
Number of blades: 4 blades, 1 counter blade
Flywheel diameter: 63,5 cm
Feed: manually
Dimensions: 102x107x152 cm (hopper 220 cm)
Measurements of packaging: 120x80x131 cm
Weight m. Packaging: 205 kg
Weight: approx. 175 kg

Wood chipper BX42RS

BX-42RS. Working with this unit is a true delight thanks to its hydraulic feedsystem. With this model, feeding andpushing etc. are a thing of the past; the 2 large feed rollers take care of this themselves. The speed of the feed rollers can be continuously adjusted. This is important so that the feed speed can be adjusted to fit the diameter of the material to be shredded. Smaller diameters can be fed faster than larger diameters. In the event that the feeder should become blocked, the feed can be set into reverse using the large handle on the hopper. Furthermore, the feed can be switched off using this handle. The unit is powered via the tractor's hydraulics; a pressurised supply line and an unpressurisedreturn line are required or alternatively a double-acting control unit is required.

The hopper can be folded upward with ease for transport and is secured using a cotter pin.
In order to make folding upward easier, the chipper has 2 shock absorbers.

The unit has been constructed in a very maintenance-friendly way; you can open the flywheel cover completely by unscrewing just one screw, giving you access to the 4 cutting blades. These cutting blades are double-sided, so that they can be turned around if required. The flywheel has a net-weight of 125 kg and has fitted wings, which produces the incredibly powerful suction which ultimately expels the chippings out of the chute. Thanks to this powerful suction, a blockage of the shredding unit is virtually impossible.

The shredder has been conceived to be attached to 3 point linkage and can be used from Cat. I.

BX42RS Technical specifications:

• Tractor power: min. 30 HP

• Mounting: 3 point linkage from Cat. I upward

• P.T.O: Included in delivery

• Number of blades: 4 blades, 1 counter blade

• Flywheel diameter: 62 cm

• Feed: hydraulic (via tractor hydraulic system)

• Weight w/ Packaging: 320 kg

• Weight: approx. 272 kg

Wood chipper BX-62RS/92RS

BX-62RS/92RS. Working with this unit is a true delight thanks to its hydraulicfeed system. With this model, feeding and pushing etc. are a thing of the past; the 2 large feed rollers take care of this themselves. The speed of the feed rollers can be continuously adjusted. This is important so that the feed speed can be adjusted to fit the diameter of the material to be shredded. Smaller diameters can be fed fasterthan larger diameters. In the event that the feeder should become blocked, the feed can be set into reverse using the large handle on the hopper. Furthermore, the feed can be switched off using this handle. The unit is powered via the tractor' s hydraulics; a pressurisedsupply line and an unpressurised return line are required or alternatively a double-acting control unit is required.

The hopper can be folded upward with ease for transport and is secured using a cotter pin.
In order to make folding upward easier, the chipper has 2 shock absorbers.

The unit has been constructed in a very maintenance-friendly way; you can open the flywheel cover completely by unscrewing just one screw, giving you access to the 4 cutting blades. These cutting blades are double-sided, so that they can be turned around if required. The flywheel has a net-weight of 125kg and has fitted wings, which produces the incredibly powerful suction which ultimately expels the chippings out of the chute. Thanks to this powerful suction, a blockage of the shredding unit is virtually impossible.

The shredder has been conceived to be attached to 3 point linkage and can be used from Cat. I.

BX62RS Technical specifications:

• Tractor power: min. 30 HP

• Mounting: 3 point linkage from Cat. I upward

• P.T.O: Included in delivery

• Number of blades: 4 blades, 1 counter blade

• Flywheel diameter: 76 cm

• Feed: hydraulic (via tractor hydraulic system)

• Dimensions: 127x132x188 cm (hopper 220 cm)

• Measurements of packaging:

1 pallet 120x100x127 cm + 1 pallet 120x90x95 cm

• Weight w/ Packaging: 515 kg

• Weight: approx. 480 kg

BX92RSTechnical specifications:

• Tractor power: min. 50 HP

• Mounting: 3 point linkage from Cat. I upward

• P.T.O: included in delivery

• Number of blades: 4 blades, 1 counter blade

• Flywheel diameter: 91,5 cm

• Feed: hydraulic (via tractor hydraulic system)

• Dimensions: 167x173x229 cm (LxWxH)

• Measurements of packaging:

1 pallet 120x110x137 cm + 1 pallet 120x90x95 cm (LxWxH)

• Weight with Packaging: 675 kg

• Weight: 645 kg

Wood chipper BX-102RS

BX-102RS is new to our shredder line. Thanks to its hydraulic infeed, pushing, pressing etc. is a thing of the past; the 2 rollers do that for you. The speed of the feed rollers can be continuously adjusted with the control valve. This is important to adjust the feed speed to the diameter of the material to be shredded. Smaller diameters can be fed faster than larger diameters.

The shredder comes complete with PTO. A shear pin has also been built into one side of the PTO, which serves as a predetermined breaking point for safety reasons in the event of blockages or overloading. This means that even larger tractors with more than 150 HP can be used without a problem.

The discharge chute has an ejection height of approx. 265cm (plus the height of the lower link) and can be rotated 360 degrees. The ejection angle can also easily be changed. The Jansen JX-102RS ejects the shredded material up to 10 metres!

The shredder was designed to attach to the 3-point linkage and can be used from Cat. II.

Technical specifications:

Tractor power: min. 70 HP

Hydr. flow rate: from 10 L/min.

Mount: 3 point linkage from Cat. II

PTO: included

Rpm: 540

Number of blades: 4 blades, 1 counter blade

Rotor diameter: 90cm

Rotor weight: approx. 120 kg

Feed chute length: 140cm

Max. Wood diameter: 18-20 cm (varies by woodquality)

Feed chute height: 60 cm (bottom to bottom edge of hopper)

Ejection height: 265cm

Feed: (via tractor hydraulics) by 2 hydraulic feed rollers

Assembled dimensions (hopper open): 275x142x265 cm (LxWxH)

Assembled dimensions (transport position): 200x135x265 cm (LxWxH)

Weight: approx. 920 kg

Package dimensions: 195x145x172 cm (LxWxH)

Weight incl. packaging: 945 kg

Wood chipper WCL-8

PTO driven, disc-operated WCL-8 woodchipper has been designed to shred a wide variety of dry and green wood up to a maximum diameter of 10cm. It produces a wood chips measuring approximately1/2cm, which ensures optimal combustion when used in wood chip boilers/furnaces. The WCL8 is powered by the tractor's PTO shaft. The transmission to the feed roller is belt driven, allowing a constant input speed. Compatible with all brands of Cat. 1 tractors with 3 point linkage for example Kubota B, Fiat, McCormick, Iseki, Ford, New Holland Boomer 25-35, Massey Ferguson, John Deere, etc. Conforming to the EC Machinery Directive.

WCL8 Wood Chipper

Mod.		HP					A	B	C
	CM	Min.	Max.	${ \boldsymbol { \mathsf { n } } } ^ { \circ }$	$\mathsf { n } ^ { \circ }$	RPM	CM	CM	CM	KGS
WCL8	20	20	60	4	1	540-1000	140	110	178	337

ZANOAGRI

Hydraulic reach mower AM

AM Hydraulic reach mower is a land-clearing machine for agricultural use. Suitable for cutting grass and shrubs in banks and ditches adjacent to the plots of land. The compact nature of the arm enables cutting flush to the wheel without obst-ructing the opposite carriageway. Already equipped with a high-performance cast iron pump and engine as standard. It can be fit with diferent sizeof flail head and trimmer.

Mod.		HP		A	OIL			α	β	Y	A	B	C	KG
	CM	Min.	Max.	KGS	L	n°	RPM	0	0	。	CM	CM	CM	KGS
AM-C60	60	25	40	800	55	24	1000	176	116	123	250	310	320	270
AM--C80	80	25	40	800	55	32	1000	176	116	123	270	330	320	285
AM--C100	100	25	40	900	55	40	1000	176	116	123	290	350	320	300

Hydraulic reach trimmer HRTP

Hydraulic arm with 130/145/160cm three size cutting bar for cutting hedges And bushes. Simple control of the rotation of the second arm makes its possible to work both on right and left hand side of tractor. The innovative reversible frame enable assembly of the machine to either the back or front without need for any particular alteration.The cutting head can be move forwarder 1.1m .

ZANOAGRI

Hydraulic reach trimmer HRT

Hydraulic arm with130/145/160cm three size cutting bar for cutting hedgesAnd bushes. Simple control of the rotation of the second arm makes its possible to work both on right and left hand side of tractor..The innovative reversible frame enable assembly of the machine to either the back or front without need for any particular alteration

Backhoe BHM95

The BHM95 back hoe is fitted to the tractor 3-point linkage and can be easily take on and off to change to other implements.The 'Fixed' boom is for all-round general requirements and represents great value for money. The boom pivots through a range of 180o but cannot be moved from side to side. It is compact backhoe fit for small from 15-25HP tractor

Main Specifications of Backhoe

Mod.

HP

A

B

C

D

E

F

KG

Min.

Max.

0

CM

RPM

CM

CM

CM

CM

CM

CM

KGS

BHM95

18

35

180

29

540

95

250

220

40

150

140

250

ZANOAGRI

Backhoe BHM

The BHM back hoe is fitted to the tractor 3-point linkage and can be easily take on and off to change to other implements.The 'Fixed' boom is for all-round general requirements and represents great value for money. The boom pivots through a range of 180o but cannot be moved from side to side.

Backhoe BHSM

The BHM back hoe is fitted to the tractor 3-point linkage and can be easily take on and off to change to other implements.The 'Fixed' boom is for all-round general requirements and represents great value for money. The boom pivots through a range of 180o but cannot be moved from side to side.

ZANOAGRI

Flail Mower AGF

AGF The Road offset-inline mulcher for grass, residue of vegetables, bushesand pruning(up to Ø 2 cm), suited for tractors from 45 to100 HP. Ideal for clearing green areas, gardens, slopes, ditches, banks of watercourses, road side banks.

Mod.
	CM	Min.	Max.	$\mathsf { n } ^ { \circ }$	$\mathsf { n } ^ { \circ }$	RPM	KGS
AGF140	139	40	70	12	3	540	520
AGF160	159	40	70	14	3	540	560
AGF180	179	40	70	16	3	540	600
AGF200	199	50	80	18	4	540	650
AGF220	219	50	80	20	4	540	685
AGF240	239	60	90	22	4	540	720

Flail Mower AGFP

AGFP The Road offset-inline mulcherr for grass, residue of vegetables, bushes and pruning (up to Ø 2 cm), suited for tractors from 45 to 100 HP. Ideal for clearing green areas, gardens, slopes, ditches, banksof watercourses,road side banks.With rear openbonnet,it is good for cutting long grass, and it is easily for maintace, changing hammers. AndCollecting rakes fixed in the rear bonnet keep residues within the cutting chamber until the complete crushing

Mod.						0			KG
	CM	Min.	Max.	$\boldsymbol { \mathsf { n } } ^ { \circ }$	$\boldsymbol { \mathsf { n } } ^ { \circ }$	$\mathsf { n } ^ { \circ }$	$\boldsymbol { \mathsf { n } } ^ { \circ }$	RPM	KGS
AGFP140	139	40	70	12	N/A	10	$^ 3$	540	560
AGFP160	159	40	70	14	N/A	10	3	540	620
AGFP180	179	40	70	16	N/A	12	3	540	660
AGFP200	199	50	80	18	N/A	14	4	540	710
AGFP220	219	50	80	20	N/A	14	4	540	750
AGFP240	239	60	90	22	N/A	16	4	540	790

ZANOAGRI

Flail Mower AGL

AGL is the Road offset-inline mulcherr for grass, residue of vegetables, bushes and pruning (up toØ 1 cm), suited for tractors from20 to 45HP.Ideal for clearing green areas, gardens, slopes, ditches, banks of watercourses, road side banks.

Mod.
	CM	Min.	Max.	$\mathsf { n } ^ { \circ }$	$\mathsf { n } ^ { \circ }$	$\mathsf { n } ^ { \circ }$	RPM	KGS
AGL105	105	18	35	16	32	3	540	230
AGL115	115	18	35	18	36	3	540	240
AGL125	125	20	40	20	40	3	540	250
AGL145	145	30	50	24	48	3	540	270
AGL165	165	30	50	26	52	3	540	290

Flail Mower AGLP

AGLP is the Road offset-inline mulcherr for grass, residue of vegetables, bushes and pruning(up to Ø 1 cm), suited for tractors from20 to 45HP. Ideal for clearing green areas, gardens, slopes, ditches, banks of watercourses, road side banks.

Mod.								KG
	CM	Min.	Max.	$\mathsf { n } ^ { \circ }$	$\mathsf { n } ^ { \circ }$	$\mathsf { n } ^ { \circ }$	RPM	KGS
AGLP105	105	18	35	16	32	3	540	230
AGLP115	115	18	35	18	36	3	540	240
AGLP125	125	20	40	20	40	3	540	250
AGLP145	145	30	50	24	48	3	540	270
AGLP165	165	30	50	26	52	3	540	290
AGLP185	185	30	50	28	56	4	540	320
AGLP200	200	30	50	30	60	4	540	360

ZANOAGRI

Flail Mower AGMZ

Versatility of use is the main strength of the AGMZ model. The sturdy frame and high rpm of the rotor guarantee optimum work in different operational situations, such as shredding grass, twigs in vineyards or orchards and any cornstalks.hydraulic movement, With rear open bonnet,it is good for cutting long grass, andit is easily for maintace, changing hammers. And Collecting rakes fixed in the rear bonnet keep

Flail Mower AGMA

Versatility of use is the main strength of the AGMA model. The sturdy frame and high rpm of the rotor guarantee optimum work in different operational situations, such as shredding grass, twigs in vineyards or orchards and any cornstalks.hydraulic movement, With rear open bonnet,it is good for cuttinglong grass, and it is easily for maintace, changing hammers. changing hammers. And Collecting rakes fixed in the rear bonnet keep residues within the cutting chamber until the complete crushing

ZANOAGRI

Flail Mower AGDA

Mulchers model AGDA has been designed to be fitted on Middle powers tractors(45-65hp). with hydraulic side shift cylinder This model is used to shred corn, straw, pruning waste, crops in general, weeds.garden ,park etc. and it is easily for maintace, changing hammers. steel structure, rotor balanced electronically and fitted on self-centring and perfectly pro-tected bearings, belt trasmission driven by an oillu-brificated bevel gear with freewheel en-closed in cast-iron. changing hammers. And Collecting rakesfixed in the rear bonnet keep residues within the cutting chamber until the complete crushing

AGDA Flail Mower

Flail Mower EFG

Mulchers model EFG has been designed to be fitted on low powers tractors(20-35HP).

This model is used to shred corn, straw, pruning waste, crops in general, weeds.garden,park etc. it is easily for maintace, changing Blade o hammers. steel structure, rotor balanced electronically and fitted on self-centring and perfectly pro-tected bearings, belt trasmission driven by an oillubrificated bevel gear with freewheel en-closed in cast-iron. Possibility to fit Y blades or hammer de-pendingon the working requi-rements.changing hammers. And Collecting rakes fixed in the rear bonnet keepresidues within the cutting chamber until the complete crushing

ZANOAGRI

Flail Mower EFGC

Mulchers model EFGC has been designed to be fitted on Middle powers tractors(22-55hp) Possibility tofit Y blades or hammer de-pending on theworking requi-rements.

EFGC Flail Mower

Mod.		HP						A	B	C	KG
	CM	Min.	Max	n°	n°	n°	RPM	CM	CM	CM	KGS
EFGC105	105	25	55	16	32	3	540	92	117	95	230
EFGC115	115	25	55	18	36	3	540	92	127	95	240
EFGC125	125	25	55	20	40	3	540	92	137	95	249
EFGC135	135	30	55	20	40	3	540	92	147	95	258
EFGC145	145	30	55	22	44	3	540	92	157	95	267
EFGC155	155	30	55	24	48	3	540	92	167	95	276
EFGC165	165	30	55	26	52	3	540	92	177	95	285
EFGC175	175	30	55	28	56	3	540	92	187	95	294

Flail Mower EFGCH

Mulchersmodel EFGCH has been designed to be fitted on Middle powers tractors(35-55p). with hydraulic side shift cylinder Possibility to fitY blades or hammer de-pending on the working requi-rements.

EFGCH Flail Mower

ZANOAGRI

Flail Mower EFGC200

Mulchersmodel EFGC has been designed to be fitted on Middle powers tractors(22-55hp).
Possibility to fit Y blades or hammer de-pending on the working requi-rements.

Flail Mower EFGCH200

Mulchers model EFGCH200 has been designed to be fitted on Middle powers tractors(35-55p). with hydraulic side shift cylinder Possibility to fit Y blades or hammer de-pending on the working requi-rements.

ZANOAGRI

FLAIL MOWER VCDH

The VCDH mowers are multitasking machines targeted to the green maintenance professionals and they are specifically designed for tractors with rear and front P.T.O. Therefore, the design has paid particular attention to the details that distinguish a professional machine from a traditional shredder. The rotor benefits from the helical arrangement of the cutting tools to evenly distribute the workload and allow the best balancing obtaining asignificant vibration reduction. The counterweights are distributed on the balancing discs and not welded to the rotor. The frame is characterized by an encased structure with two separate beams,one in the front and the other in the upper section to ensure the best ratio between weight and rigidity.Other details such as the tubular skids,hydraulic movement, the roller with bolted flanges and the belt transmission with its belt tightner place the VCDH series at the top of the professional shredders.

Mower AG

The main feature of the VD model is the reversibility of the three point hitch, which allows the machine to be used at the front or rear of the tractor. When connected to the front, other equipment can be attached to the rear. The sturdy frame and hydraulic movement guarantee optimum work in different operational situations, such as shredding grass, twigs in vineyards or orchards and any cornstalks.

ZANOAGRI

FLAIL MOWER AGMH

mulcher with a wide opening intake of large dimensions designed for very heavy works with pruning residues of up to15-18 cm in olive groves, vineyards, fruitorchards, citrus, grass, etc.

STANDARD EQUIPMENT

\- Hydraulic displacement with a zinc-coated solid bar CAT II.

– Free wheel in the gearbox.

– Rear door with hydraulic opening by two cylinders and back roller integrated in the same.

– Reinforced iron protective bands.

\- Very reinforced hammer rotor and bearings.

FLAIL MOWER AGMZS

Versatility of use is the main strength of the VMZSU model. With The additional disc cutting The sturdy frame and high rpm of the rotor guarantee optimum work in different operational situations, such as shredding grass, twigsin vineyards ororchards and any cornstalks.hydraulic movement, With rear open bonnet,it is good for cutting long grass, and it is easily for maintace, changing hammers. And Collecting rakes fixed in the rear bonnet keep residues within the cutting chamber until the complete crushing.

ZANOAGRI

FLAIL MOWER EF

mulcher with a wide opening intake of large dimensions designed for very heavy works with pruning residues of up to 15-18 cm in olive groves, vineyards, fruit orchards, citrus, grass, etc.

STANDARD EQUIPMENT

\- Hydraulic displacement with a zinc-coated solid bar CAT II.

– Free wheel in the gearbox.

– Rear door with hydraulic opening by two cylinders and back roller integrated in the same.

– Reinforced iron protective bands.

\- Very reinforced hammer rotor and bearings.

Mod.		世HP						A	B	C	KG
	CM	Min.	Max.	n°	n°	n°	RPM	CM	CM	CM	KGS
EF85	85	18	25	14	28	3	540	94	70	75	155
EF95	95	18	25	16	32	3	540	104	70	75	160
EF105	105	18	25	18	36	3	540	114	70	75	166
EF115	115	18	25	20	40	3	540	124	70	75	172
EF125	125	25	30	20	40	3	540	134	70	75	178
EF135	135	25	30	22	44	3	540	144	70	75	186
EF145	145	25	30	24	48	2	540	154	70	75	194
EF155	155	30	35	26	52	3	540	164	70	75	204
EF165	165	30	35	28	56	3	540	174	70	75	212
EF175	175	30	35	30	60	3	540	184	70	75	218

FLAIL MOWER EFL

Mulchers model EFL has been designed to be fitted on low powers tractors(20-35HP).

This model is used to shred corn, straw, pruning waste, crops in general, weeds.garden ,park etc. it is easily for maintace, changing Blade o hammers. steel structure, rotor balanced electronically and fitted on self-centring and perfectly pro-tected bearings, belt trasmission driven by an oillubrificated bevel gear with freewheel en-closed in cast-iron. Possibility to fit Y blades or hammer de-pending on the working requi-rements.

EFL Flail Mower

Mod.		EHP							A	B	C	KG
	CM	Min.	Max.	CM	n°	n°	n°	RPM	CM	CM	CM	KGS
EFL125	125	25	55	65 60	20	40	3	540	143	66	84	198
EFL145	145	30	55	85 60	24	48	3	540	163	66	84	216
EFL165	165	30	55	105 6q	26	52	3	540	183	66	84	234

FLAIL MOWER EFLH

Mulchers model EFLH has been designed to be fitted on low powers tractors(20-35HP). with hydraulic side shift cylinder

This model is used to shred corn, straw, pruning waste, crops in general, weeds.garden ,park etc. it is easily for maintace, changing Blade o hammers. steel structure, rotor balanced electronically and fitted on self-centring and perfectly pro-tected bearings, belt trasmission driven by an oillubrificatedbevel gear with freewheel en-closed in cast-iron. Possibility to fit Y blades or hammer de-pending on the working requi-rements.

VFLAH Flail Mower

Mod.		CHP							A	B	C	KG
	CM	Min.	Max.	CM	n°	n°	n°	RPM	CM	CM	CM	KGS
EFLH125	125	25	55	82 4365 60	20	40	3	540	143	77	78	230
EFLH145	145	30	55	102 4385 60	24	48	3	540	163	77	78	248
EFLH165	165	30	55	122 43125 60	26	52	3	540	183	77	78	266

FLAIL MOWER FCN

For green sports areas:

By mounting the special laminated knives, the grass is cut at the same time as all the residue is collected.

Suitable for golf courses, football fields, sports fields, horse racing fields, camping sites, parks, etc. The grass is conveyed into the collector with hydraulic opening.

For the vineyard:

By mounting the hammers instead, you will have the cutting and harvesting of the vine shoots in the vineyard with a single step.

FCN FLAIL COLLECTOR

Mod.								A	B	C	KG
	CM	Min.	Max.	$\mathsf { n } ^ { \circ }$	$\boldsymbol { \mathsf { n } } ^ { \circ }$	${ \boldsymbol { \mathsf { n } } } ^ { \circ }$	RPM	CM	CM	CM	KGS
FCN90	90	20	45	20	40	3	540	110	140	120	310
FCN120	120	25	50	28	56	3	540	140	140	120	323
FCN160	160	30	60	36	72	3	540	180	140	120	367

ZANOAGRI

Flail mower VFLU

VFLHU Grass mower of variable width, suited to work onvineyards and orchards for tractors from 30 to 120 HP.With self hydraulic system for disc head cutting

Slasher SL

Built to last medium duty slasher with re-enforced frame \~ quick-release off-set options \~ strength & re-liability \~ collapsible hitch \~ adjustable skids \~ large range of cutting heights \~ stone guard \~ height adjustable rear wheel allows for tighter turning areas with less stress on both your tractor and the slasher itself \~ thick clean top deck to prevent fire through debris build-up \~ solid top link and a simple to attach PTO.

SL SLASHER

ZANOAGRI

Slasher SLFT

Built to last medium duty slasher with re-enforced frame - strength & reliability - galvanised deck - adjustable skids - large range of cutting heights - stone guard - height adjustable rear wheel allows for tighter turning areas with less stress onboth your tractor and the slasher itself - thick clean top deck to prevent fire through debris build-up andreduce corrosion - simple to attach PTO with breakaway clutch. Perfect for hobby farms - fence-line and wall edge slashing - slashing grasses, small trees and light scrub - perfect is rough terrain - clearing roadsides - creating firebreaks.

Finishing Mower FMN

Perfect for use when presentation is essential \~ ideal for work around golf courses, sporting fields, parklands, camping grounds, schools, homesteads and roadsides \~ real discharge for normal use or side discharge option for use in areas where the cuttings need to be thrown clear – like under orchards.

FMN Finishing Mower

Mod.					A	B	C	KG
	CM	Min.	Max.	RPM	CM	CM	CM	KGS
FMN120	120	20	30	540	123	111	65	195
FMN150	150	25	35	540	153	111	65	210
FMN180	180	30	50	540	183	127	65	230

ZANOAGRI

Weed mower DMBC

Hydraulic Between-Row Weed-Mower with DoubLE head and independent frame, ideal for all ecological and mechanical controls of the weeds in vineyard and orchard. It is driven by the tractor's hydraulics. Equipped with indipendent frame.

The machine consists of a mowing head with cord-filaments rotor, positioned parallel to the ground surface. During the working phase, and by means of the centrifugal force in the rotor, the cords will reach and shred the stem's weed and the grass in between. Absolutely clean results without damaging the tree trunks and even light stems!

• Power:hydraulic;.

• Power required :18-50hp;

Operating speed :2-4km/h;

\* Oil pressure:140-180bar;
Weight :approx 200kg;

Weed mower SMBC

Hydraulic Between-Row Weed-Mower with single head and independent frame, ideal for all ecological and mechanical controls of the weeds in vineyard and orchard. It is driven by the tractor's hydraulics. Equipped with indipendent frame.The machine consists of a mowing head with cord-filaments rotor, positioned parallel to the ground surface.

During the working phase, and by means of the centrifugal force in the rotor, the cords will reach and shred the stem's weed and the grass in between. Absolutely clean results without damaging the tree trunks and even light stems!

• Power:hydraulic;.

ZANOAGRI

Disc mower DUFO

Mechanical disc-mower, ideal for all ecological and mechanical controls of the weeds in vineyardand orchard. It is driven by the tractor's hydraulics.

• Power:hydraulic;.

• Power required :18-50hp;

Operating speed :2-4km/h;

• Oil pressure:140-180bar;

Rotary Tiller IGN

Perfect for use when presentation is essential \~ ideal for work around golf courses, sporting fields, parklands, camping grounds, schools, homesteads and roadsides \~ real discharge for normal use or side dischargeoption for use in areas where the cuttings need to be thrown clear – like under orchards.

IGN Rotary Tiller

Mod.		HP				8		A	B	C	KG
	CM	Min.	Max.	MM	$\boldsymbol { \mathsf { n } } ^ { \circ }$	${ \mathfrak { n } } ^ { \circ }$	RPM	CM	CM	100	KGS
IGN90	90	16	20	140	4	9+9	540	113	95	100	317
IGN105	105	20	28	140	5	12+12	540	123	95	100	327
IGN125	125	25	30	140	6	15+15	540	143	95	100	340
IGN135	135	25	35	140	7	18+18	540	153	95	100	348
IGN150	150	30	50	140	8	21+21	540	173	95	100	359
IGN180	180	40	70	140	9	24+24	540	203	95	100	380

ZANOAGRI

Rotary Tiller IGNA

IGNH Rotary tiller with a considerable variety of uses . Its structure means it can satisfy the requirements of small and medium farms and achieve excellent results on even very difficult soils with considerable economy in the use of tractor power.

IGNA Rotary Tiller

Mod.		HP				8		A	B	C	KG
	CM	Min.	Max.	MM	n°	n°	RPM	CM	CM	CM	KGS
IGNA180	180	45	75	180	7	21+21	540	197	103	114	500
IGNA200	200	45	75	180	8	24+24	540	217	103	114	520
IGNA220	220	50	80	180	9	27+27	540	237	103	114	560
IGNA230	230	50	90	180	10	30+30	540	247	103	114	580

Rotary Tiller TL

TL rotary tiller of small dimensions, recommended for hobby farmers and small farms, suitable for vineyards, orchards, vegetablecrops and gar-dening. Particularly designed to have a sturdy build and a low power requirement to match light tractors.

TL Light Rotary Tiller

Mod.		HP		H		8		A	B	C	KG
	CM	Min.	Max.	MM	$\mathsf { n } ^ { \circ }$	$\mathsf { n } ^ { \circ }$	RPM	CM	CM	CM	KGS
TL85	85	10	35	90	4	16	540	94	75	73	155
TL95	95	10	35	90	4	16	540	104	75	73	175
TL105	105	15	35	90	5	20	540	114	75	73	195
TL115	115	15	35	90	6	24	540	124	75	73	215
TL125	125	18	35	90	7	28	540	134	75	73	235
TL135	135	18	35	90	7	28	540	144	75	73	255

ZANOAGRI

Rotary Tiller IGNH

Mod.IGNHis a rotary tiller that with hydraulic side shift well-suited for use with tractors that require relatively light implements; it is particularly recommended for tillingsoil for the more demanding crops, in vineyards and orchards. it is suitable for use in a wide variety of conditions

Main Specifications of Rotary Tiller

Mod.		心HP				8		A	B	C	KG
	CM	Min.	Max.	MM	${ \boldsymbol { \mathsf { n } } } ^ { \circ }$	n°	RPM	CM	CM	100	KGS
IGN90	90	16	20	140	4	9+9	540	113	95	100	317
IGN105	105	20	28	140	5	12+12	540	123	95	100	327
IGN125	125	25	30	140	6	15+15	540	143	95	100	340
IGN135	135	25	35	140	7	18+18	540	153	95	100	348
IGN150	150	30	50	140	8	21+21	540	173	95	100	359
IGN180	180	40	70	140	9	24+24	540	203	95	100	380

Stone Burier SB

The SB light Stone burier for tractors from 15 to 28 HP, ideal for working in stony fields in order to improve the preparation, not only for farming purposes, but also in greenhouses, parks, gardens and golf yards.Standard equipment: 3-point linkage Cat. I., single speed gearbox, PT0 540 rpm., rotor speed 240 rpm., PTO drive shaft withslipclutch, ∅30 cm Net roller, chain transmission, in oil bath, automatic chain adjuster, flanged rotor equipped with 4spiral C-blades, stone guard grid.

ZANOAGRI

Stone Burier 1GZ

heavey Stone burier for tractors from 30 to 75 HP, ideal for working in stony fields in order to improve the preparation, not only for farming purposes, but also in greenhouses, parks, gardens and golf yards.Standard equipment: 3-point linkage Cat. I-Il., single speed gearbox, PTO 540 rpm., rotor speed 220 rpm., PTO drive shaft, Gear transmission, flanged rotor equipped with 6 spiral C-blades, stone guard grid.

1GZ180 HEAVY STONE BURIER

Mod.		HP						A	B	C	KG
	CM	Min.	Max.	MM	n°	n°	RPM	CM	CM	CM
1GZ180	180	50	80	180	7	21+21	540	197	103	114	627
1GZ200	200	50	80	180	8	24+24	540	217	103	114	647
1GZ220	220	80	100	180	9	27+27	540	237	103	114	667

Potato Digger PD50

PTO driven single row potato harvester for easy sorting of potatoes,Rear wheel height adjustment to suite any cop Can also be used for de-stoning pottao ground prior to planting.Front blade width20"

Main Specifications of PD50 Potato digger

Mod.	11			A	B	C	KG
	Min.	Max.	RPM	CM	CM	CM	KGS
PD50	15	35	540	130	70	90	175

ZANOAGRI

Post Hole Digger PHD

PHD-S/L

Create fences with ease to keep wanted things in and unwanted things out \~ for use in many soil types \~ ideally suited for fence building and tree planting around any type of property. 30hp gearbox with PTO protection cover \~ Augers are available in sizes from6 to 35 inches (100 to 900 mm) to suit many post sizes and soil types\~ designed for strength and durability with re-enforced boom\~high strength, re-enforced arm

PHD-HL

Create fences with ease to keep wanted things in and unwanted things out \~ for use in many soil types \~ ideally suited for fence building and tree planting around any type of property. 50hpgearbox with PTO protection cover \~Augers are available in sizes from 6 to 35 inches (100 to 900 mm) to suit many post sizes and soil types \~ designed for strength and durability with re-enforced boom\~ high strength, re-enforced arm With hydraulic cylinder can supply much power

PHD Post Hole Digger

Mod.	HP
	Min.	Max.	CM	RPM	KGS
PHD-S	30	45	30	540	96
PHD-L	45	60	30	540	108
PHD-HL	45	60	30	540	115