该页无缩略图
專業制造精密優質橡膠機械
Professional Manufacturer of High Quality & Precision Rubber Machinery
www.jiaxin-sz.com.cn
佳鑫电子设备科技(广东)有限公司
JIAXIN ELECTRONIC EQUIPMENT & TECHNOLOGY (GUANGDONG) CO., LTD.
佳鑫電子設備科技（廣東）有限公司成立於2000年，公司現位於廣東省佛山市南海區丹灶，專業生產製造高精密優質橡膠機械生產設備。
佳鑫電子設備科技（廣東）有限公司，為配合國內外客商的發展，特將臺灣專業制造技術轉移到國內，擴大生產各種高精密油壓機械。
在香港、臺灣及中國國內已擁有四十多年的橡膠機械設備專業生產相關經驗。不僅是全國最有實力的橡膠機械設備生產企業之一，而且在國際市場上廣獲好評。國際陣容強大、技術力量雄厚、售後服務完善、行銷網遍佈全世界。絕對是橡膠電子零件、汽車零件、導電橡膠、工業油封、油圈、運動器材、醫療器械及各式器皿等生產廠家的最佳選擇。
Jiaxin Electronic Equipment & Technology (Guangdong) Co., Ltd. was founded in 2000. Located in Danzao Town, Nanhai District, Foshan City, Guangdong Province, the company specializes in manufacturing highprecision, highquality rubber machinery production equipment.
To support the development of domestic and overseas clients, Jiaxin Electronic Equipment & Technology (Guangdong) Co., Ltd. has introduced professional manufacturing technology from Taiwan to mainland China to expand the production of a wide range of highprecision hydraulic machinery.
We possess over 40 years of professional experience in rubber machinery manufacturing in Hong Kong, Taiwan and mainland China. We are not only one of the most powerful rubbermachinery manufacturers nationwide, but also widely recognized in the international market. Backed by a
佳鑫電子設備科技（広東）有限公司は2000年に設立され、現在は広東省仏山市南海区丹灶に拠点を置き、精密で高品質なゴム機械生産設備の専門企業です。
佳鑫電子設備科技（広東）有限公司は、国内外の取引先のニーズに応えるため、台湾の専門技術を国内に移転し、各種高精度油圧機械の生産を拡大しています。
香港、台湾および中国国内で約40年以上のゴム機械設備の専門生産技術を持っています。国内で最も実力のあるゴム機械設備生産企業の一つであるだけでなく、当社の設備は国際市場でも高い評価を得ています。強力な国際的陣容、豊富な技術力、充実したアフターサービス、全世界に広がる販売ネットワークを備えており、ゴム製電子部品、自動車部品、導電性ゴム、工業用オイルシール、オイルリング、スポーツ用具、医療機器各ゴム生産メ一カ一様にとって最良となる選択肢の企業です!
(， .
.
，，.卫早，，卫，，，之，否.
佳鑫一機臺特性&重點材質說明
JIAXIN-Introduction to machine feature & Descriptions for key materials of machine .. P2
佳鑫一新型電腦控制器簡介JIAXIN-Introduction to new type micro-controllers ...P3
佳鑫-PC控制箱之優點JIAXIN-Advantages of PC control box .P4
RIH/RH/RHS 射出成型機系列 Injection molding machine series
RIHF 200\~1500(Ton)-FTMO-2RT先進先出直立式橡膠射出成型機
RIHF 200\~1500(Ton) 2RT Front Top Mold-Open Rubber Injection Molding Machine.. ... P5
RH 100\~1000(Ton)-FTMO-2RT 電腦控制自動射出橡膠前頂2RT開模油壓成型機
RH 100\~1000(Ton) 2RT front top mold-open rubber injection molding machine .. P9
RHV 200\~400(Ton)-FTMO-3RT 電腦控制自動射出真空型前頂3RT開模油壓成型機
RHV 200\~400(Ton)3RT front top mold-open Vacuum injection molding machine ...P11
RH/RHS 射出成型機系列介紹Introduction to injection molding machine series. ...P13
RHC 200(Ton)橡膠注射成型機(冷流道型)
RHC 200(Ton) Rubber Injection Molding Machine (Cold Runner Type) .. P15
RCH C型電腦控制自動射出橡膠油壓接頭機
RCH C Type Rubber Injection Molding Machine .P16
VC 真空成型機系列 Vacuum molding machine series
VC 50\~1000(Ton)-RTMO 高精密度自動快速真空軌道開模熱壓成型機
VC 50\~1000(Ton) Rail mold-open hydraulic vacuum molding machine. ..P17
VC 50\~1000(Ton)-FTMO-2RT 高精密度自動快速真空前頂2RT開模熱壓成型機
VC 50\~1000(Ton) 2RT front top mold-open hydraulic vacuum molding machine P18
VC 50\~1000(Ton)-FTMO-3RT 高精密度自動快速真空前頂3RT開模熱壓成型機
VC 50\~1000(Ton) 3RT front top mold-open hydraulic vacuum molding machine .. P19
VC 50\~1000(Ton)-FTMO-4RT 高精密度自動快速真空前頂4RT開模熱壓成型機
VC 50\~1000(Ton) 4RT front top mold-open hydraulic vacuum molding machine .P20
VC 真空成型機系列介紹Introduction to vacuum molding machine series.. ...P21
VC 50\~500(Ton)-FTMO 高精密度真空前頂開模熱壓成型機
VC 50\~500Ton) Front Top Mold-Open Hydraulic Vacuum Molding Machine .P21
VC 50\~500(Ton)-FTMO-3RT(CE TYPE)高精密度自動快速真空前頂3RT開模熱壓成型機
VC 50\~500(Ton)3RT Front Top Mold-Open Hydraulic Vacuum Molding Machine(CE TYPE) .P24
HS 快速熱壓成型機系列 High-speed molding machine series
HS 5\~1000(Ton)-RTMO 高精密度自動快速軌道開模熱壓成型機
HS 5\~1000(Ton) Rail mold-open hydraulic molding machine ..P25
HS 5\~1000(Ton)-FTMO-2RT 高精密度自動快速前頂2RT開模熱壓成型機
HS 5\~1000(Ton) 2RT front top mold-open hydraulic molding machine. ..P26
HS 5\~1000(Ton)-FTMO-3RT 高精密度自動快速前頂3RT開模熱壓成型機
HS 5\~1000(Ton)3RT front top mold-open hydraulic molding machine ..P27
HS 5\~1000(Ton)-FTMO-4RT 高精密度自動快速前頂4RT開模熱壓成型機
HS 5\~1000(Ton) 4RT front top mold-open hydraulic molding machine .. P28
HS 快速熱壓成型機系列介紹Introduction to High-speed molding machine series ..P29
LIHS/LIVS 液態矽膠射出成型機系列 Liquid Silicone Injection Machine series
LIHS 30\~300(Ton)-NTMO 立式液態硅膠射出成型機
LIHS 30\~300(Ton) NTMO Liquid Silicone Injection Machine ... P31
LIVS 100\~500(Ton)-FTMO-2RT 立式液態硅膠射出成型機
LIVS 100\~500(Ton) 2RT From Top Mold-Open Liquid Silicone Injection Machine ....PP3
其他機種 Other machines
汽門嘴專用熱壓成型機Tire valves hydraulic molding machine ….P35
高精密橡(矽)膠切條機High-precision rubber (silicon) cutting machine. ...P36
SR高精密度全自動卧式硅膠射出成型機Automatic Silicon Rubber Injection Molding Machine... ..P37
特殊訂作機械 Custom-made machines ..P43
注壓機Hydraulic transter molding machine ...P43
佳鑫一機臺特性 JIAXIN-Introduction to machine features
1. 零配件全面性國際化，標准化。
Components have been internationalized and standardized.
2. 機臺耐久性的力學設計。 Mechanics design for longer durability.
3. 離子氮化處理的高耐磨平面。 Nitrogen treated surfaces for abrasion resistance.
4. 温度分布達±3℃的高標准。Temperature uniformity of ± 3°C
5. 排氣精准度達百分之百的需求。 Vacuum systems meet the requirement of 100% precision.
6. 運作穩定静音的油路設計。 Hydraulic systems are silent, dependable and leak free.
7. 完善的圖解式操作說明書及保養維修手册。
An illustrated operation guide and a maintenance manual are provided.
8. 油缸基座采用3D電腦力學分析，輔助結構設計，一體鑄造成型，强化平面精度與結構，永保機臺壽命。 Main hydraulic cylinder has been designed by using 3D computational mechanics, and structural analysis. It is cast from one piece of metal so that the structure and the surface precision are strengthened to make the machine more durable.
9. 脚架采用方型鋼梁結構設計，確保機臺受力穩定。
The machine base are made of square type steel to assure that the forces acting on the machine can be sustained steadily.
佳鑫一機臺重點材質說明JIAXIN-Descriptions for key materials of machine
| 名稱 Name | 材 質Material | 特點Special features |
| 機體Main machine body | QT500-7(FCD-500) | 經過時效鈍化具高抗拉强度及韌性。High tensile strength and toughness after time effect. |
| 主缸軸心Ram | CR 白口鑄鐵CR white special alloy metals | 經過研磨完成，精密度在正負0.02mm以内。Tolerance is within ±0.02mm after grinding. |
| 輔助油壓缸Auxiliary hydraulic cylinder出入模油壓缸Hydraulic cylinder for loading/unloading molds | STKM-13 | 采用NOK油封，耐磨抗温壽命長。Adopt NOK oil seals, which are durable and resistant for abrasionand temperature. |
| 立柱Vertical post | HRC55-58 | 中碳鋼鍍硬鉻處理，采用無油軸承，内層包覆TEFLON薄膜。Medium carbon steel is hard chromium treated. Oil-less bearings are used.TEFLON is coated. |
| 立柱螺帽Nut of vertical post | QT500-7(FCD-500) | 體成型，采用梯型牙及特殊之防松設計，永保機臺之精度。Made of one piece. Acme threaded and specially designed for non slippage andfitted to assure precise leveling and a special design for anti-slip are adopted toassure the machine precision. |
| 馬達Motor | 匯川伊邁伺服一體機\東莞電機DongGuan Motor\YImal -One Mach | 低噪音，節能，壓力精准穩定。ritfeatures low noise, energy efficiency, and precise stable pressure. |
| 進出模滑軌Rails for in/out molds | 滑軌道座 Slide track SK-5T | 耐磨鋼材，并加裝軸承設計，使進出模穩定滑行。Abrasion resistant steel. Bearings are setup to make the in/out moldsrun smoothly. |
| 熱壓臺面 Working bench | HRC50-55 | 含進退模板采用氮化處理，并經過研磨完成。In/out molds is Nitrogen treated and grinded. |
| 電熱管 Electrial thermal conduit | 鎳鉻合金綫Nickel-chromium alloy | 附有保護裝置，耐用性特長。（采用多段式設計)Protection devices are attached to make it durable.(A design of multiple sections is adopted.) |
| 油壓系統 Hydraulic system | 油管：高壓軟管Tube for hydraulic fluid: High pressuresoft tub USA4000PSI泵浦：YUKEN Pump: YUKEN電磁閥：JIA Solenoid: JIA油桶：磁性濾清Oil tank: magnetic filter parts areinterchangeable with high gualitycomponents that also meetinternational standards | 集體式油路系統設計，可設定主軸缸升降速度。進出模精度定位。The hydraulic system is desinged centrally. The rising speed of main cylindercan be set.Precisely positioning for in/out molds. |
佳鑫一新型微電腦控制器簡介
佳鑫微电脑控制器与一般传统PLC控制器比较：
JIAXIN Comparing micro-controllers with conventional PLC controllers:
| 項目Items | 佳鑫微電腦控制器JIAXIN micro-controllers | 傳統PLC控制器Conventional PLC controllers | 比較說明Comparison |
| 主機Main board | 64位元CPU系統64 bit double CPU system | 16位元單CPU系統16 bit single CPU system | 1. 雙CPU系統，反應時間短，故更能精密定位，更快速，更穩定的控制機臺動作。The responding time of a double CPU system is very short. Therefore, it can control thepositioning with high precision and machine motions in a speedy and stable manner.2. 可支援中央監控系統，及作参數修改、模組存取、檔案管理等，功能超强。It supports the central monitoring system. It is powerful at modifying parameters and accessto modules and file management. |
| 温控系統Temperaturemonitoringsystem | 内建PID温控模組SSR電子式輸出控制Built-in PID temperaturecontrol module and SSRelectronic output control | 外加温控模組，及電磁繼電器輸出Attached temperaturemonitoring module andelectromagnetic relayouput | 1. 温度可由面板做集中式監視設定、PID控制方式，可達到高精度的温度控制，用以控制產品的高品質。Temperatures can be set and monitored at the central control panel or in the way of PID control.Temperatures are then controlled with a very high precision in order to assure the quality of products.2. SSR電子式輸出控制，無火花、低雜訊、無噪音，比電磁按觸器壽命更長更能精准控制温度。The way of SSR electronic output control provides no sparks, low noise signal andelectromagnetic contact with no noise ratio. It is more durable and it can control thetemperature in a more accurate manner. |
| 輸入及輸出Input andoutput | 32點隔離輸入32 pin isolated input32點電晶體輸出，可擴展256點32 pin TTL output, can extend | 32點隔離輸入，32點交流繼電器輸出32 pin isolated input32 pin AC relay output | 32點電晶體輸出，可直接推動方向閥，具有輸出點過電流短路保護，低雜訊、壽命特長，無火花產生，比傳統PLC的繼電器更耐用、可靠。The way of 32 pin TTL output can activate solenoids directly and provide low noise signal andno sparks. It is more durable and reliable than conventional PLC relays. |
| 控制箱面板Control panelfor electricitybox | 1. 四段或八段模温Four stage temperaturemonitoring or eight stagetemperature monitoring2. 電流顯示 current display | 簡單文字說明Simple text description | 模溫電流顯示配合單相無熔絲過電流保護，使得不論短路保護、加熱監控測試或故障維修，都非常方便。A current display to monitor temperatures incorporated with single-phase no fuse for over-currentprotection is very convenient for short protection, testing of heating monitoring or troubleshooting. |
| 3. 加熱狀態指示燈顯示Indicator to indicatethe heating status | 加熱狀態，可由指示燈了解加熱情况，避免因一時疏忽忘記關閉電熱開關而造成金錢損失及危險的產生。Through indicator, the heating status can be known and it diminishes the chances of propertylosses and hazards caused by not turning off the heating switch accidentally. | ||
| 4. 加硫時間左右座各别顯示Sulfur adding can be showed by leftand right indicators respectively | 加硫計時，采用高亮度之紅LED數位顯示，可輕易的掌握機臺狀態。For the time display about adding sulfur, a very bright red LED is adopted to display digits,and then it can handle the status of machine very easily. | ||
| 顯示模組Display module | "10"LCD液晶觸摸屏"10"LCD liquid crystaldisplay. | LED7節燈管或觸控螢幕LED 7 section display ortouch panel | 1. 螢幕大小適中，無輻射綫傷害。而且視窗式功能導向的畫頁設計，使得操作設計容易。The screen is in right size and it is not radioactive. The window-like function-orientedgraphic-user interface makes operations and settings easier.2.IC選擇耐高温，且螢幕表面加壓克立外框耐撞。ICs with high temperature resistance are chosen. An acrylic outer frame is installed on thescreen to provide protection from impact.3. 每套微電腦控制出廠前，皆經過2天，温度攝氏60度BURN-IN測試。Before each micro-controller is delivered, a BURN-IN test is performed for two days at atemperature of 60°C.4.螢幕有自動省電功能，只要10分鐘内無警告訊息及不觸碰螢幕，螢幕顯示將自動消失，以保護螢幕，等到有人按了螢幕任一按鍵后，螢幕將再度啟動。A screen saver is available to save power. If there is no warning message and no touch onthe screen for 10 minutes, the screen will be off automatically to provide protection. Once anykey is hit, the screen is on again. |
| 操作設定Operationsettings | 視窗式功能導向操作及畫頁設計Window-likefunction-orientedoperation andgraphic-user interfacedesign | 簡單的時間及功能設定Simple time and functionsettings | 1. 電控箱面板有簡易的畫頁及功能鍵說明，使得初學者入門容易。The control panel for electricity box provides an easy graphic-user interface and descriptionsfor function keys. It makes new learners easier to catch on.2. 畫頁設計功能導向，如監視頁、温度設定頁、温度追踪頁、時間設定頁、特殊時間設定頁、功能設定頁、品管頁。Function-oriented graphic-user interfaces are available, such as windows for monitoring,temperature settings, temperature monitoring, time settings, special time interval setting,function setting, and quality control. |
【温度追踪曲綫】 Temp Tracing
佳鑫一PC控制箱之優點 JIAXIN-Advantages of PC control box
佳鑫電子設備科技(深圳)有限公司
各機種均采用相同規格化的PC軟體，抗高温的PC板，全面無接綫的設計，更换容易，維修簡便，使用壽命長，各種系統功能均有，全套的連綫管理系統，方便軟體功能更改，永遠都具備强化功能之要件。
The specifications of PC software used for all types of machine are the same. The PC board is highly temperature-resistant. No connections are incorporated into the design. It is very convenient for replacement and maintenance. It is very durable. A variety of functions are provided. A full set of on-line management systems is provided. It is very convenient for function changes about software. It contains all the essential elements to become very powerful.
【温度設定】Temp Setting
【機器監視】Machine Status
操作者按【排气设定】页次键后，屏幕显示如下图。 Operators press the button of [Exhaust Setting] and the following screen is shown.
【輸出點定義】Output (Y) Definition
RIHF 200\~1500(Ton)-FTMO-2RT
真空泵浦(選配) Vacuum Pump(Option)
特點介紹 Features
①機座采用特殊力學設計，平面精度佳，節省占地空間，安全、低噪聲，制成品外觀美，品質優。
Special mechanics design for accurate surface precision, saving of space, low noise, good outlook, excellent quality and safe.
②采用電液伺服系統，低噪音，節能，壓力精準穩定。
Equipped with an electro-hydraulic servo system, it features low noise, energy efficiency, and precise stable pressure.
③ 采用高精密度德制電子尺設計，能准確的控制與計算射出量之大小。
A design incorporating a high precision optical ruler, makes in Germany, is adopted. The injection volume can be calculated and controlled precisely.
4 可選配水循環模温控制機，實現冷流道技術，有效防止死料的產生，减少橡膠原料的損耗。
Can be using the water cooling system for mold temperature control unit which avoid any deadlock of material and reduce waste of material.
⑤可選配真空泵浦，提供模具内抽真空功能，確保產品品質，提升成品優良率。
Option of using the vacuum pump provides vacuum function for the mold so as to obtain high quality assurance and increase yield rate.
6 可選配紅外綫安全電眼，并具有全自動警告系統及多重安全防護裝置，可清楚掌握機臺狀况，確保安全。
A light curtain, is available. An automatic warning system is available. It monitors the status of machine in order to provide extra protection to assurs the operation safety for operators.
RIHF-200-1500先進先出直立式橡膠射出成型機
RIHF200\~1500(Ton) First-In-First-Out Vertical Rubber Injection Molding Machine
技術參數 Specifications
| 機型 Type Unit | 200Ton | 300Ton | 400Ton |
| 理論注射容積cc Theory Injection Volume | 2500 | 3000 | 4000 |
| 注射壓力 kgf/cm² Injection Pressure | 1750 | 1750 | 1750 |
| 開模行程 mm Mould Opening Stroke | 480 | 550 | 550 |
| 鎖模力 kN Clamping Force | 2000 | 3000 | 4000 |
| 熱板間距 mm Daylight of Heater Platen | 480~550 | 550~650 | 550~650 |
| 熱板尺寸 mm Heater Platen Dimension | 600x600 | 650x650 | 700x700 |
| 馬達功率 kW Motor Power | 18.5 | 21.4 | 21.4 |
| 電熱功率 kW Heater Plate Power | 16 | 18 | 24 |
| 機器重量 ton Machine Weight | 6 | 9 | 12 |
| 機臺尺寸 m Machine Size | 2.5x2.7x3.5(4.1) | 2.65x2.9x3.7(4.3) | 2.75x3x3.85(4.5) |
\*本公司保留修改外觀和技術參數的權利，恕不另行通知。
應 用 Application
多邊、多角及其他復雜成品，特別是運動用品、醫療用品、汽車用品、電子用品等精密性應用。 Polygin, polyhedron, and other complicated products. Especially in sports, medical, automobile, and electrical applications.
RIH 200\~800(Ton)-FTMO-2RT
真空泵浦(選配) Vacuum Pump(Option)
特點介紹 Features
① 力學設計 Mechanics design
機座采用特殊力學設計，平面精度佳，節省占地空間，安全、低噪聲，制成品外觀美，品質優。
Special mechanics design for accurate surface precision, saving of space, low noise, good outlook, excellent quality and safe.
②入料系統Material supply system
特殊二段式入料設計，能使原料得到最佳排氣效果，又不死料之功能。
A special design of two-stages material supply is employed. It expels bubble out of the raw material in the most effective way and there is no dead material left in the injection system.
③ 射出量控制 Injection volume control
采用高精密度德制電子尺設計，能准確的控制與計算射出量之大小。
A design incorporating a high precision optical ruler, makes in Germany, is adopted. The injection volume can be calculated and controlled precisely.
④ 冷流道技術 Cool runner technology
可選配水循環模温控制機，實現冷流道技術，有效防止死料的產生，减少橡膠原料的損耗。
Can be using the water cooling system for mold temperature control unit which avoid any deadlock of material and reduce waste of material.
⑤ 模内真空設計 Vacuum mold design
可選配真空泵浦，提供模具内抽真空功能，確保產品品質，提升成品優良率。
Option of using the vacuum pump provides vacuum function for the mold so as to obtain high quality assurance and increase yield rate.
⑥ 安全設計 Safety design
備有紅外綫安全電眼，并具有全自動警告系統及多重安全防護裝置，可清楚掌握機臺狀况，確保安全。
A light curtain, is available. An automatic warning system is available. It monitors the status of machine in order to provide extra protection to assurs the operation safety for operators.
油路設計 Hydraulic system design
采用電液伺服系統，低噪音，節能，壓力精准穩定。
Equipped with an electro-hydraulic servo system, it features low noise, energy efficiency, and precise stable pressure
電腦控制立式射出橡膠前頂2RT開模油壓成型機RIH 200\~800(Ton) 2RT Front Top Mold-Open Rubber Injection Molding Machine
技術參數 Specifications
| 機型 Type | Unit | 200Ton | 300Ton | 400Ton |
| 注射柱塞直徑 Injection ram Dia. | mm | 75 | 90 | 95 |
| 注射壓力 Injection Pressure | kgf/cm² | 1750 | 1750 | 1750 |
| 最大射出率 Max. Injection rate | cc/s | 55 | 70 | 97 |
| 理論注射容積 Theory Injection Volume | CC | 1500 | 3000 | 4000 |
| 螺杆直徑 Screw Dia. | mm | 40 | 45 | 45 |
| 螺杆轉速 Screw Speed | rpm | 0~70 | 0~110 | 0~145 |
| 鎖模力 Clamping Force | kN | 2000 | 3000 | 4000 |
| 開模行程 Mould Opening Stroke | mm | 480 | 550 | 550 |
| 熱板間距 Daylight of Heater Platen | mm | 550 | 550~650 | 550~650 |
| 立柱凈間距 Net column spacing | mm | 690x300 | 745x280 | 840x390 |
| 熱板尺寸 Heater Platen Dimension | mm | 600x600 | 650x600 | 700x700 |
| 馬達功率 Motor Power | kW | 15 | 15 | 18.5 |
| 電熱功率 Heater Plate Power | kW | 16 | 18 | 24 |
| 真空泵功率(選配) Vacuum Pump Power(Option) | kW | 1 | 1 | 1 |
| 模温機功率(選配) Temperature Controller Power (Option) | kW | 6 | 6 | 6 |
| 系統壓力 System Pressure | kgf/cm² | 200 | 200 | 200 |
| 機器重量 Machine Weight | ton | 7 | 9 | 10.5 |
| 機臺尺寸 Machine Size | m | 3.2x2x4 | 3.2x2.2x4.9 | 3.5x2.5x5.3 |
應用 Application
多邊、多角及其他復雜成品，特別是運動用品、醫療用品、汽車用品、電子用品等精密性應用。 Polygin, polyhedron, and other complicated products. Especially in sports, medical, automobile, and electrical applications.
RH 100\~1000(Ton)-FTMO-2RT
電腦控制自動射出橡膠前頂2RT開模油压成型機RH 100\~1000(Ton) 2RT Front Top Mold-Open Rubber Injection Molding Machine
特點介紹 Features
① 力學設計 Mechanics design
機座采用特殊力學設計，平面精度佳，制成品外觀美，品質優。
All components are mounted on a single base. Great attention to surface finishing presents a machine that is fine in appearance as well as dependable in production.
② 入料系統Material supply system
特殊二段式入料設計，能使原料得到最佳排氣效果，又不死料之功能。
A special design of two-stages material supply is employed. It expels bubble out of the raw material in the most effective way and there is no dead material left in the injection sysem.
③射出量控制 Injection volume control采用高精密度德制電子尺設計，能准確的控制與計算射出量之大小。
A design incorporating a high precision optical ruler, makes in Germany, is adopted. The injection volume can be calculated and controlled precisely.
④ 轉射板設計 Design of rotary injection board具特殊的座進、座退功能，可使射嘴不死料。清料容易，品質穩定。
Special designs for loading/unloading functions are provided. It causes no dead material in the injection nozzle. It is easy to clean the material. It is durable and the quality is consistent.
⑤ 安全設計 Safety design
可選配紅外綫安全電眼。并具有全自動警告系統及多重安全防護裝置，可清楚掌握機臺狀况，確保安全。
Option of using the light curtain, made in Japan, An automatic warning system is available. It monitors the status of machine in order to provide extra protection to assurs the operation safety for operators.
⑥ 油路設計 Hydraulic system design
采用電液伺服系統，低噪音，節能，壓力精准穩定。 Equipped with an electro-hydraulic servo system, it features low noise, energy efficiency, and precise stable pressure.
RH 100\~1000(Ton)-FTMO-3RT
電腦控制自動射出橡膠前頂3RT開模油壓成型機RH 100\~1000(Ton) 3RT Front Top Mold-Open Rubber Injection Molding Machine
機臺動作流程 Flow of machine motions
1. 出模Unload the mold
2. M1上升掀模 M1 goes up to open the mold
5. M1下降合模 M1 goes down and close the mold
3. M2上升脱模分離 M2 goes up and separates from the mold
6. 入模 Load the mold
RHV 200\~400(Ton)-FTMO
電腦控制自動射出真空型前頂開模油壓成型機RHV 200\~400(Ton) 3RT Front Top Mold-Open vacuum Injection Molding Machine
① 真空能力 Vacuum capability
真空度高，采用平均抽法，可使產品穩定，提高品質及産能。
It is capable of being high degree of vacuum. A standard vacuum method is used to make consistent. high quality products.
② 射出量控制 Injection volume control采用高精密度德制電子尺設計，能准確的控制與計算射出量之大小。
A design incorporating a high precision optical ruler, made in Germany, is employed. The injection volume can be calculated and controlled precisely.
③ 轉射板設計 Design of rotary injection board具特殊的座進、座退功能，可使射嘴不死料，清料容易，品質穩定。
Special designs for loading/unloading functions are provided. It causes no dead material in the injection nozzle. It is easy to clean the material. It is durable and the quality is consistent.
④ 安全設計 Safety design
可選配紅外綫安全電眼。并具有全自動警告系統及多重安全防護裝置，可清楚掌握機臺狀况，確保安全。
Option of using the light curtain, made in Japan, An automatic warning system is available. It monitors the status of machine in order to provide extra protection to assurs the operation safety for operators.
⑤ 油路設計 Hydraulic system design采用電液伺服系統，低噪音，節能，壓力精准穩定。
Equipped with an electro-hydraulic servo system, it features low noise, energy efficiency, and precise stable pressure.
RH-S 100\~1000(Ton)-FTMO
電腦控制自動射出橡硅膠兩用油壓成型機RH 100\~1000(Ton) 3RT Front Top Mold-Open Rubber (Silicon) Injection Molding Machine
① 入料系統Material supply system
特殊二段式入料設計，增加排氣裝置，能使原料得到最佳排氣效果，又不死料之功能。
A special design of two-stages material supply is employed. Increase expels bubble device. It expels bubble out of the raw material in the most effective way and there is no dead material left in the injection system.
② 射出量控制 Injection volume control
采用高精密度德制電子尺設計，能准確的控制與計算射出量之大小。
A design incorporating a high precision optical ruler, made in Germany, is employed. The injection volume can be calculated and controlled precisely.
③ 轉射板設計 Design of rotary injection board具特殊的座進、座退功能，可使射嘴不死料，清料容易，品質穩定。
Special designs for loading/unloading functions are provided. It causes no dead material in the injection nozzle. It is easy to clean the material. It is durable and the quality is consistent.
④ 安全設計 Safety design
可選配紅外綫安全電眼。并具有全自動警告系統及多重安全防護裝置，可清楚掌握機臺狀况，確保安全。
Option of using the light curtain, made in Japan, An automatic warning system is available. It monitors the status of machine in order to provide extra protection to assurs the operation safety for operators.
⑤ 油路設計 Hydraulic system design采用電液伺服系統，低噪音，節能，壓力精准穩定。
Equipped with an electro-hydraulic servo system, it features low noise, energy efficiency, and precise stable pressure.
⑥ 橡膠和固態硅膠原料都可使用。
Rubber raw materials and Solid silicone rubber raw materials can be used.
RH/RHS 射出成型機系列介紹
Introduction to injection molding machine series
特點 Features:
成品良率幾近完美，毛邊少且均匀，適合各種精密復雜的成品，為現今業界追求高品質的最佳選擇。
Perfect yield, few waste material excellent consistency, Suitable for precise and complicated products. It's the best choice for high quality demand.
應用 Application:
多邊、多角及其他復雜成品，特別是運動用品、醫療用品、汽車用品、電子用品等精密性應用。
Polygin, polyhedron, and other complicated products. Especially in sports, medical, automobile, and electrical applications.
適用材料 Suitable for:
橡膠射出機 Rubber injection molding machine:
天然橡膠Nature rubber
合成橡膠 Synthetic rubber
（如：丁腈橡膠NBR
乙丙橡膠EPDM
氯丁橡膠CR
丁苯橡膠SBR
氟橡膠FBR
聚异戊二烯橡膠IR.….….等)
矽膠射出機Silicon rubber molding machine:
固態矽膠 Solid silicon rubber
IIIL
RH/RHS 射出成型機系列介紹
Introduction to injection molding machine series
機臺構成 Configuration:
| No. | 名稱Appellation |
| A | 入料馬達 Infeed motor |
| B | 入料系統Infeed system |
| C | 聯軸器 Shaft coupling |
| D | 入料□ in-Infeeder |
| E | 上電熱板 Top heating plate |
| F | 轉射板 Ejector plate |
| G | 安全電眼(選配)Light curtain(Option) |
| H | 電器控制箱 Electrical control box |
| 1 | 出入模板 In-out mold plate |
| J | 滑軌 Slide track |
| K | 上座 Top bolster |
| L | 吊模機構 Clamp of mold |
| M | 下電熱板 Bottom heating plate |
| N | 中座 Moving bolster |
| O | 主缸 Main ram |
| P | 基座 Foot stock |
| Q | 射料系統 Injection system |
| R | 警示燈 Alarm light |
| S | 操作盒 Operating switch Box |
| T | 壓力表 Pressure adjustment gauge |
| U | 光學尺 Optical ruler |
| V | 油表 Oil flow gauge |
| W | 手孔 Hand hole |
| X | 油箱Oil tank |
| 橡(矽)膠射出成型機規格 Specification of rubber (silicon) injection molding machine: | |||||||
| 機型 Type | 100Ton | 200Ton | 300Ton | 400Ton | 500Ton | 600Ton | 800Ton |
| 出力 Clamping force (Ton) | 100 | 200 | 300 | 400 | 500 | 600 | 800 |
| 行程 Stroke (mm) | 380 | 480 | 550 | 550 | 600 | 600 | 700 |
| 臺面 Heating plate size (mm) | 400x400 | 503x508 | 575x600 | 700x700 | 800x800 | 900x900 | 1100x1100 |
| 缸徑 Diameter of cylinder (mm) | 250 | 350 | 450 | 500 | 560 | 600 | 700 |
| 射出量 Injection volume (cc) | 900 | 1500 | 3000 | 4000 | 5000 | 8000 | 10000 |
| 最大射出壓力 Max. Injection pressure (kg/cm²) | 2000 | 2000 | 2000 | 1800 | 1810 | 1870 | 1890 |
| 最大射出率 Max. Injection rate (cc/s) | 45 | 50 | 70 | 97 | 111 | 148 | 186 |
| 馬達功率 Motor Power (KW) | 12.4 | 12.4 | 17.8 | 21.4 | 21.4 | 30 | 30 |
| 開模型式 Type of mold opening | 上升下降-出入模-2RT-3RT-4RT | Up/Down-In/Out-2RT-3RT-4RT | |||||
| 單軸電熱 Single shatf thermal electricity (kw) | 10 | 12.5 | 20.4 | 20.4 | 30 | 38 | 54 |
| 總電力 | 28 | 30.4 | 38 | 47 | 51.4 | 68 | 87 |
| Total power (kw) 量 重 | NTMO:5 | 6 | 8.5 | 10.5 | 13.5 | ||
| Gross weight (ton) | FTMO:5 | 6.5 | 9 | 11 | 14 | 18 | 25 |
| 機臺尺寸 Machine Šize (m) | 2.96x1.8x2.3 | 3.2x2.3x2.4 | 3.5x2.45x2.7 3.8x2.8x2.75 | 4.1x3x3 | 4.4x3.2x3.25 | 5x3.75x3.75 | |
RHC 200(Ton）橡膠注射成型機（冷流道型）
RHC 200(Ton) Rubber Injection Molding Machine (Cold Runner Type)
① 流道設計 Runner design
同時備有冷熱流道配置，方便客户選擇使用。生產時采用冷流道装置，流道内膠料不死料，减少膠料的浪費，减低生產成本。出模取產品后清膠時間縮短，自動化程度提高，减低勞動强度，提高生產效率。
Equipped with cold runner and hot runner configuration, choose to use the convenience of customers. Cold runner device production, to reduce the waste of rubber material, to reduce production costs. Reduce the time of clean up mold, degree of automation to improve, reduce labor intensity, improve production efficiency.
② 射出量控制 Injection volume control
采用高精密度德制電子尺設計，能准確的控制與計算射出量之大小。
A design incorporating a high precision optical ruler, makes in Germany is adopted. The injection volume can be calculated and controlled precisely.
③ 油路設計 Hydraulic system design
采用電液伺服系統，低噪音，節能，壓力精準穩定。
Equipped with an electro-hydraulic se rvo system, it features low noise, energy efficiency, and precise stable pressure.
技術參數 Specifications
| 型號 | Type | RCH200 |
| 鎖模力 | Clamping Force | 200ton |
| 主缸行程 | Main ram Stroke | 480mm |
| 熱板間距 | Daylight of Heater Plater | 480~780mm |
| 臺面尺寸 | Platen Dimension | 503×508mm |
| 缸徑 | ram Dia. | 350mm |
| 射出量 | injection volume | 1500cc |
| 電機功率 | Motor Power | 12.4kW) |
| 電熱功率 | Heater Plate Power | 25kW |
| 機器重量 | Machine Weight | 7ton |
RCHC型電腦控制自動射出橡膠油壓接頭機
RCH C Type Rubber Injection Molding Machine
技術參數 Specifications
| 型號 Type | Unit. | 4RCH | 8RCH |
| 注射部分 Injection Unit | |||
| 螺杆直徑 Screw Dia. | mm | 30 | 40 |
| 理論注射容積 Thereotical Injection Volume | CC | 200 | 500 |
| 射料軸心直徑 Injection Cylinder Dia. | mm | 35 | 50 |
| 注射壓力 Injection Pressure | kgf/cm² | 1700 | 1700 |
| 螺杆轉速 Screw Speed | rpm | 0~100 | 0~80 |
| 最大射出率 Max. Injection rate | cc/s | 80 | 65 |
| 射嘴直徑 Nozzle Dia. | mm | 3 | 4 |
| 系統最大油压 Max. System Pressure | kgf/cm² | 200 | 200 |
| 鎖模部分 Clamping Unit | |||
| 加壓方向 Direction of Pressure | 下壓式 | 上壓式 | |
| 鎖模力 Clamping Force | KN | 400 | 800 |
| 熱板尺寸 Heater Platen Dimension | mm | 450x300 | 500x400 |
| 開模行程 Mould Opening Stroke | mm | 300 | 300 |
| 熱板間距 Daylight of Heater Platen | mm | 425 | 450 |
| 最小模厚 Min. Mould Thckness Range | mm | 125 | 150 |
| 最大開模力 Max. Mould Opening Force | KN | 110 | 150 |
| 動力部分 Power Uint | |||
| 電熱功率 Heater Plate Power | kW | 7.5 | 15 |
| 電機功率 Motor Power | HP | 10 | 20 |
| 總功率 Total Power | kW | 15 | 30 |
| 其它 Other | |||
| 油箱容積 Oil tank Cubage | L | 280 | 400 |
| 機器重量 Machine Weight | kg | 3000 | 7000 |
| 長 Length | mm | 1300 | 1400 |
| 寬 Width | mm | 2300 | 2300 |
| 高 Height | mm | 3300 | 3700 |
特點介紹 Features
① 力學設計 Mechanics design
機座采用特殊力學設計，平面精度佳，節省占地空間，C型結構，三面開口，方便操作，安全、低噪聲，制成品外觀美，品質優。
Special mechanics design for the press base is employed for high surface precision, saving of space, C type molding structure, 3 sides open for ease of operation, more safe, lower noise, excellence quality and appearance for completed rubber parts..
②入料系統Material supply system
特殊螺杆式入料設計，能使原料得到最佳排氣效果，又不死料之功能。
A special screw design of material feeding. It expels bubble out of the raw material in the most effective way and there is no dead material left in the injection sysem.
③ 射出量控制 Injection volume control
采用高精密度德制電子尺設計，能准確的控制與計算射出量之大小。
A design incorporating a high precision optical ruler, makes in Germany is adopted. The injection volume can be calculated andcontrolled precisely.
應用 Application:
適用于橡膠密封條接口或接角加工，可生產有金屬嵌件、形狀復雜、大斷面、厚壁等工藝復雜、成型難度較高的汽車用密封件、電子用品等精密性產品。
Suitable for the connection of rubber sealing products and corner joint. Rubber products with complicated workmanship and precision molding requirement such as metal part insert and complicated sharp required, large break and thicker surface happened on the products like rubber seals for automotives, electionic appliance and precision prducts.
VC 50\~1000(Ton)-RTMO
高精密度自動快速真空軌道開模熱壓成型機VC 50\~1000(Ton) Rail Mold-Open Hydraulic Vacuum Molding Machine
特點介紹 Features
① 真空能力 Vacuum capability
真空度高，采用平均抽法，可使產品穩定，提高品質及産能。
It is capable of being high degree ofvacuum. A standard vacuum method is used to make consistent. high quality products.
② 開模設計 Mold opening design
專利設計之新型軌道開模，掀模角度可達90度，方便人員操作。换模具時，不需將軌道開模座卸下，即可輕松完成。大幅提升工作效率及安全性。
A patent is granted for a new type rail mold opening. The opening angle is up to 90 degrees. It is very convenient for operation. Another feature of the new rail mold opening is that there is no need to remove the base of the rail mold opening while replacing molds. It promotes the work efficiency and safety.
機臺動作流程 Flow of machine motions
③掀模設計 Mold loading/unloading design特殊掀模機構設計，耐用壽命長，出入模安静、快速、平穩。
Incorporate a special design into the mechanism of mold loading/unloading. It is durable, quiet, speedy and stable.
④ 油路設計 Hydraulic system design
采用電液伺服系統，低噪音，節能，壓力精准穩定。
Equipped with an electro-hydraulic servo system, it features low noise, energy efficiency, and precise stable pressure.
⑤模具校正 Alignment
2. 入模后，上升定位，真空罩下降關閉真空，上升加壓，排氣
具有快、慢速校模選擇功能，使校正模具能更精准更安全。
Twospeeds of mold calibration are provided for users to choose from, fast andslow. It makes the calibration more safe and more accurate.
1. 合模，入模
Close the mold and load the mold.
After loading the mold, the main cylinder goes up to the predetermined position. Lower the vacuum hood. Suck out the air until a state of vacuum is reached. The main cylinder goes up. Increase the pressure to expel bubbles out.
3. 排氣完后，真空破壞，真空罩上升，加硫
After bubbles are expelled completely, the state of vacuum exists no more. Lift the vacuum mask and curing.
4. 下降，出模，掀模
Lower the main cylinder and unload the mold. Open the mold.
5. 取成品，置原料
Take out the final product and put new material in.
VC 50\~1000(Ton)-FTMO-2RT
高精密度自動快速真空前頂2RT開模熱压成型機VC 50\~1000(Ton)2RT Front Top Mold-Open Hydraulic Vacuum Molding Machine
特點介紹 Features
①2RT開模之適合各種二層或三層模具使用，是種多功能的機型。 This type of machine is multi-functional, because it is suitable to be used for top opening double or triple mold plates.
②采用電液伺服系統，低噪音，節能，壓力精准穩定。
Equipped with an electro-hydraulic servo system, it features low noise, energy efficiency,
and precise stable pressure.
③具有慢速校模功能，校正模具更精准更安全。
Slow moving speed is available for alignment more safe and more accurate.
④ 進出模定位准確，有100%的定位安全設計，確保模具不損壞。 Molds can be precisely positioned. A 100% safety design for positioning is available to prevent molds from damage.
⑤掀合模速度可調，准確可靠。
The speed to open close the mold is adjustable. It is very accurate and reliable.
機臺動作流程 Flow of machine motions
1. 装模(原始狀態)
Setup the mold
(initial status).
2. 下料，啟動(合模) Supply the material and start the processes(close the mold).
6. 主缸上升加壓，排氣同時抽真空 The main ram goes up. Increase the pressure to expel bubbles out.
3.入模 Load the mold.
4. 主缸上升至抽真空位置 The main ram goes up to the predetermined position ready for entering a state of vacuum.
8. 加硫完成，主缸下降After curing, lower themain ram.
5. 真空罩下降，同時抽真空
7. 真空破壞結束后，真空罩上升，持續加硫 After the state of vacuum exists no more, lift the vacuum hood and curing.
Lower the vacuummask. At the same time, suck out the air until a state of vacuum is reached.
9. 出模，掀模Unload the mold.Open the mold.
Take out the final product and put new material in.
VC 50\~1000(Ton)-FTMO-4RT
高精密度自動快速真空前頂4RT開模熱压成型機VC 50\~1000(Ton) 3RT Front Top Mold-Open Hydraulic Vacuum Molding Machine
Manual Pneumatic Auxillary Mold Open Device (Option)
Pneumatic Auxillary Mold Open Device (Option)
特點介紹 Features
①3RT架構特點在于超越一般傳統的前頂式掀模，可用于三層或四層模具之特殊功能，具有掀模及中層模具個別頂出之設計。
The 3RT surpasses the traditional top opening mold that can be used for the triple or four mold plates with the design of opening mold and pushing out the mold in between.
2 此掀模功能具有分段掀模、分段中模頂出、連續掀模及中模頂出之軟體設計，可依操作需要做調整。
The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening andcontinuous pushing out the mold in between.
機臺動作流程 Flow of machine motions
1. 出模
Unload the mold
4. M2下降合模
M2 goes down and close the mold
2. M1上升掀模 M1 goes up to open the mold
5.M1下降合模 M1 goes down and close the mold
3. M2上升脱模分離
M2 goes up and separates from the mold
6. 入模 Load the mold
VC 50\~1000(Ton)-FTMO-4RT
高精密度自動快速真空前頂4RT開模熱压成型機VC 50\~1000(Ton) 4RT Front Top Mold-Open Hydraulic Vacuum Molding Machine
特點介紹 Features
4RT架構特點在于超越一般傳統的前頂式掀模，可用于三層或四層取成品之特殊模具，此功能具有掀模及中層模具個別頂出，底層模具入模，中層模下降，頂針上升拍成品之特殊功能，可依操作者需要做調整。
加高型前頂機構(選配)Extra High Front Top Mold Open(Option)
The 4RTsurpasses the traditional top opening mold that can be used for taking out the final product when there are triple or four mold plates with the design of opening mold, pushing out the mold in between, loading the bottom mold, loweringthe mold in between, and rising hood to hit the final production.
機臺動作流程 Flow of machine motions
VC 真空成型機系列介紹
Introduction to vacuum molding machine series
特點 Features:
真空罩在6秒鐘内即完成650mmHG之真空度以上，對于成型不易、要求精密之成品最為適合。
Vacuum degree can reach to 650mmHG within 4 seconds while the mold in vacuum cover. It is using for difficult molding, high-precision products.
應用 Application:
1. 軌道開模Rail mold-open:
型環、迫緊、鍵盤等。
O-rings, packing, keyboard and so on.
2. 2RT開模 2RT mold-open:
滚筒、鞋子、醫療藥品塞、汽機車零件、防震用品、墊片、導電用品、電子用品以及硅膠厨具等精密性應用。 Roller, shoes, pharmaceutical stopper, automobile parts, anti-vibration products, pad, conductive products, electrical And silicone kitchenware applications and so on.
3.3RT開模3RT mold-open:
適合三層、四層模具產品特性。
Suitable for 3 for 4 layers mold.
4.4RT開模4RT mold-open:
適合三層、四層且產品需要頂出的模具。
Suitable for 3 for 4 layers and products need top of the mold.
固態矽膠 Solid Silicon Rubber
VC 真空成型機系列介紹
Introduction to vacuum molding machine series 機臺構成 Configuration:
適用材料 Suitable for:
天然橡膠Nature Rubber
合成橡膠Synthetic Rubber
（如：丁腈橡膠NBR乙丙橡膠EPDM氯丁橡膠CR丁苯橡膠SBR氟橡膠FBR聚异戊二烯橡膠IR.….…等)
| 編號 No. | 名稱 Description |
| 1 | 主缸 Main cylinder |
| 1a | 主缸油封 Main cylinder oil seal |
| 2 | 中座 Moving bolster |
| 3 | 上座 Top bolster |
| 4 | 活塞Chrome peated ram |
| 5 | 法蘭 Flange |
| 5a | 法蘭固定螺絲Flange fixed screw |
| 5b | 法蘭防摩封 Ram wiper seal |
| 5c | 法蘭防油O型圈 Flange oil proof O-RING |
| 6 | 聯结板 Linking Board |
| 6a | 聯结板固定螺絲 Linking Board Fixed Screw |
| 7 | 上電熱板 Upper Electric Heating plate |
| 7a | 上電熱板固定螺絲 Fixed screw of upper electric heating plate |
| 7b | 上隔熱板 upper insulation plate |
| 8 | 下電熱板 Lower electric heating plate |
| 8a | 下電熱板固定螺絲 Fixed screw of lower electric heating plate |
| 8b | 下隔熱板Lower insulation plate |
| 9 | 滑軌道 Sliding rail |
| 9a | 滑軌道固定螺絲 Fixed screw of sliding rail |
| 10 | 出入模板 Exit & inlet of molding plate |
| 11 | 立柱Chrome neated vectical post |
| 11a | 立柱羅帽(大)Vectical post nut (large) |
| 11b | 立柱羅帽防松羅絲 Vectical post lock nut |
| 11c | 立柱螺帽(小)Vectical post nut (small) |
| 12 | 無油軸承座Oil free bearing seat |
| 12a | 無油轴承座固定螺絲Fixed screw of oil free bearing seat |
| 12b | 無油轴承 Oil free bearing |
| 12c | 無油轴承O型扣環 O-RING of oil free bearing |
| 12d | 無油轴承防塵封 Dust proof seal of oil free bearing |
| 13 | 子缸(辅助油壓缸) Auxiliary hydraulic cylinder |
| 13a | 子缸與中座固定螺絲 Sub-cylinder and middle seat fixed screw |
| 13b | 子缸與主缸固定螺絲 Sub-cylinder and master cylinder fixed screw |
| 13c | 子缸防塵封 Sub-cylinder dust proof seal |
| 13d | 子缸法蘭油封 Sub-cylinder flange oil seal |
| 13e | 子缸活塞油封 Sub-cylinder piston oil seal |
| 13f | 子缸防油O型圈Sub-cylinder oil proof O-RING |
| 14 | 真空罩總成Vacuum hood general assembly |
| 14a | 真空罩聯结板 Vacuum hood linking board |
| 14b | 真空罩軸心 Chrome plated vacuum hood mandrel |
| 14c | 真空罩油壓缸 Vacuum hood oil pressure cylinder |
| 14d | 真空罩油缸固定座螺絲 Fixed screw of vacuum hood oil cylinder |
| 14e | 真空罩聯結板螺絲 Linking board screw of vacuum hood |
| 機型 Type | 100Ton | 150Ton | 200Ton | 250Ton | 300Ton | 350Ton | 400Ton | 500Ton | 600Ton |
| 出力 Clamping force (Ton) | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 500 | 600 |
| 行程 Stroke (mm) | 300 | 300 | 250 | 250 | 250 | 300 | 300 | 300 | 300 |
| 模具最大厚度 Max. mould Thickness (mm) | 150 | 150 | 150/250 | 150/250 | 150/250 | 250 | 250 | 300 | 300 |
| 臺面 Heating plate size (mm) | :4540 | 400x400 460x460 | 503x508 546x560 | 600x600 642x600 | 600x600 642x650 | 700x700 750x750 | 750x750 800x800 | 850x850 900x900 | 900x900 950x950 |
| 缸徑 Diameter of cylinder (mm) | 250 | 300 | 350 | 400 | 450 | 500 | 500 | 560 | 600 |
| 馬達功率 Motor Power (KW) | 5.5X2 | 5.5X2 | 7.5X2 | 7.5X2 | 9.7x2 | 9.7x2 | 9.7x2 | 18.5x2 | 18.5x2 |
| 開模型式 | 上升下降-出入模-軌道-2RT-3RT-4RT Up/Down-In/Out-Rail-2RT-3RT-4RT | 上升下降 | 出入模-2RT-3RT-4RT | ||||||
| Type of mold opening 雙軸電熱 | 16.2 | 16.2 | 24 | 34 | 34 | Up/Down-In/Out-2RT-3RT-4RT 42 | 46 | 52 | 60 |
| Double shaf thermal electricity (kw) 真空泵浦 | 3.5 | 3.5 | 3.5 | 4 | |||||
| Vacuum (kw) 總電力 | 3.5 | 31 | 4 | 4 | 7.5 | 7.5 | |||
| Total power (kw) 重 量 | 31 | 43 | 52.5 | 57.5 | 66 | 67 | 94.5 | 102.5 | |
| Gross weight (ton) | RTMO: 5 FTMO: 6 | 77 | 8９ | 11 12.5 | 12 14 | 17 | 18 | 22 | 25 |
Machine Size (m)
\*本公司保留修改外觀和技術參數的權利，恕不另行通知。
VC 50\~500(Ton)-FTMO(Patent Design)
高精密度真空前頂開模熱压成型机(加裝專利毛邊收集器)VC 50\~500(Ton) Front Top Mold-Open Hydraulic Vacuum Molding Machine (Patent Design)
特點介紹 Features
專為收集橡膠生產時產生的毛邊而設計的專利型機構，防止毛邊對生產環境的污染，同時節省清潔工時。
For collection of waste generated in production of rubber designedPatent-based institutions, to maintain production site clean,While saving time cleaners
VC 50\~500(Ton)-FTMO
特點介紹 Features
①擁有前后雙工位。 Featuring front and rear dual workstations
②前頂上方含加熱板，出摸取產品時間較長情況下模具保溫效果好。
The top front includes a heating plate, ensuring good mold insulation whenthe ejection time for product removal is prolonged
③大大提高生產效率。 Significantly improve production efficiency
VC 50\~500(Ton)-FTMO-3RT (CE TYPE)
高精密度自動快速真空前頂3RT開模熱压成型機 VC 50\~500(Ton) 3RT Front Top Mold-Open Hydraulic Vacuum Molding Machine (CE TYPE)
特點介紹 Features
① 安全設計 safety design
CE
整機結構及安全設計符合歐洲CE認證標准。 CE accredited for integrated structure and safety design.
② 開模設計 Mold opening design
3RT架構特點在于超越一般傳統的前頂式掀模，可用于三層或四層模具之特殊功能，具有掀模及中層模具個别頂出之設計。
The3RTsurpasses the traditional top opening mold that can be used for the triple or four mold plates with the design of opening mold and pushing out the mold in between.
| 機型 Type | 200Ton | 250Ton | 300Ton |
| 出力 Clamping force (Ton) | 200 | 250 | 300 |
| 行程 Stroke (mm) | 250 | 250 | 250 |
| 模具最大厚度 Max. mould Thickness (mm) | 150 | 150 | 150 |
| 臺面 Heating plate size (mm) | 下: 503x5508 | 600x600 642x600 | 600x600 642x650 |
| 缸徑 Diameter of cylinder (mm) | 350 | 400 | 450 |
| 馬達功率 Horse power (hp) | 7.5x2 | 7.5x2 | 9.7x2 |
| 開模型式 Type of mold opening | 上升下降-出入模-軌道-2RT-3RT-4RT | Up/Down-In/Out-Rail-2RT-3RT-4RT | |
| 雙軸電熱 Double shaf thermal electricity (kw) | 24 | 34 | 34 |
| 真空泵浦 Vacuum (kw) | 3 | 3 | 3 |
| 總電力 Total power (kw) | 43 | 52.5 | 57.5 |
| 重量 Gross weight (ton) | FTMO: 10 | 12 | 13 |
| 機臺尺寸 Machine Size (m) | FTMO: 3.3x2x2.25 | 3.5x2.29x2.6 | 3.5x2.29x2.65 |
HS 5\~1000(Ton)-RTMO
高精密度自動快速軌道開模熱壓成型機HS 5\~1000(Ton)Rail Mold-Open Hydraulic Molding Machine
特點介紹 Features
①此機型適合二層模具使用，有快速的生產能力。
This type of machine is suitable to be used for double mold plates. It is capable of high speed production.
②軌道開模，掀模角度可達90度，方便人員操作
(可選用新型軌道開模機構)。
For the rail mold opening, the opening angle is up to 90 degree. It is very convenient to operate.
③具有慢速校模功能，校模更精准更安全。
Slow moving speed is available for alignment more safe and more accurate.
④采用電液伺服系統，低噪音，節能，壓力精准穩定。 Equipped with an electro-hydraulic servo system it features low noise, energy efficiency, and precise stable pressure.
機臺動作流程 Flow of machine motions
1. 合模，入模
Close the mold and load the mold.
3. 低壓排氣，高壓合模(加硫)
Expel bubbles out under a low pressure. Close the mold under a high pressure (curing).
2. 入模后，上升加壓 After loading the mold, the main ram goes up.
4. 下降，出模，掀模
Lower the main ram and unload the mold.
Open the mold.
5. 取成品，置原料
Take out the finished product and put new material in.
HS 5\~1000(Ton)-FTMO-2RT
高精密度自動快速前頂2RT開模熱壓成型機HS 5\~1000(Ton)2RT Front Top Mold-Open Hydraulic Molding Machine
特點介紹 Features
①2RT開模之適合各種二層或三層模具使用，是種多功能的機型。
This type of machine is multi-functional, because it is suitable to be used for top opening double or triple mold plates.
②采用電液伺服系統，低噪音，節能，壓力精准穩定。
Equipped with an electro-hydraulic servo system, it features low noise, energy efficiency, and precise stable pressure.
③具有慢速校模功能，校正模具更精准更安全。
Slowmoving speed is available for alignment more safe and more accurate.
④ 進出模定位准確，有100%的定位安全設計，確保模具不損壞。
Molds can be precisely positioned. A 100% safety design for positioning is available to prevent molds from damage.
⑤掀合模速度可調，准確可靠。
The speed to open close the mold is adjustable. It is very accurate and reliable.
HS 5\~1000(Ton)-FTMO-3RT
高精密度自動快速前頂3RT開模熱压成型機HS 5\~1000(Ton) 3RT Front Top Mold-Open Hydraulic Molding Machine
特點介紹 Features
①3RT架構特點在于超越一般傳統的前頂式掀模，可用于三層或四層模具之特殊功能，具有掀模及中層模具個别頂出之設計。
The 3RT surpasses the traditional top opening mold that can be used for the triple or four mold plates with the design of opening mold and pushing out the mold in between.
②此掀模功能具有分段掀模、分段中模頂出、連續掀模及中模頂出之軟體設計，可依操作需要做調整。
The openingmold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between.
機臺動作流程 Flow of machine motions
1. 出模
Unload the mold
4. M2下降合模
M2 goes down and close the mold
2. M1上升掀模 M1 goes up to open the mold
5.M1下降合模 M1 goes down and close the mold
3. M2上升脱模分離
M2 goes up and separates from the mold
6. 入模 Load the mold
HS 5\~1000(Ton)-FTMO-4RT
高精密度自動快速前頂4RT開模熱压成型機HS 5\~1000(Ton) 4RT Front Top Mold-Open Hydraulic Molding Machine
特點介紹 Features
4RT架構特點在于超越一般傳統的前頂式掀模，可用于三層或四層取成品之特殊模具，此功能具有掀模及中層模具個別頂出，底層模具入模，中層模下降，頂針上升拍成品之特殊功能，可依操作者需要做調整。
The 4RT surpasses the traditional top opening mold that can be used for taking out the final product when there are triple or four mold plates with the design of opening mold, pushing out the mold in between, loading the bottom mold, loweringthe mold in between, and rising thimble to move the finalproduction.
機臺動作流程 Flow of machine motions
HS快速熱壓成型機系列介紹
Introduction to high-speed molding machine series
特點 Features:
1. 出入模經研磨、氮化處理高精度鋼材結構，成就高精密水平臺面。
In/out molds are treated with nitrogen and grinded. These processes achieve high-precision parallelism of working benches.
2.機臺設計結構精密、簡單快速、模具容易搭配、保修簡易明了。
High-precision structural steel design, easy but speedy, convenient to fit various molds. Adjusting, repairing, or maintaining are very easy and accurate.
3. 具有慢速校模功能，校模更加精准，適合各種不同成型條件。
Slow speed of alignment adjusting is provided to make the molds calibration more safe and more accurate to suit various molding conditions.
應用 Application:
1. 軌道開模 Railmold-open:
醫療用品、生活用品、汽機車零件、工業零件等。
Medical applications, livelihood applications, automobile parts, industrial parts and so on .
IIII
2. 2RT開模 2RT mold-open:
O型圈、黑橡膠成品、導電橡膠、按鍵、墊片等。
O-rings, special black rubber products, conductive products, keyboards, pads, melamine and so on.
3.3RT開模 3RT mold-open:
4.4RT開模4RTmold-open:
適合三層、四層模具產品特性。
Suitable for 3 for 4 layers mold. 適合三層、四層且產品需要頂出的模具。
Suitable for 3 for 4 layers and products need top of the mold.
HS 快速熱壓成型機系列介紹
Introduction to high-speed molding machine series
機臺構成 Configuration:
適用材料 Suitable for:
天然橡膠Nature Rubber
合成橡膠Synthetic Rubber
（如：丁腈橡膠NBR乙丙橡膠EPDM氯丁橡膠CR丁苯橡膠SBR氟橡膠FBR聚异戊二烯橡膠IR.……等)
固態矽膠 Solid Silicon Rubber
| 编號 No. | 名稱 Description |
| 1 | 主缸Main cylinder |
| 1a | 主缸油封Main cylinder oil seal |
| 2 | 中座Moving bolster |
| 3 | 上座 Top bolster |
| 4 | 活塞 Chrome peated ram |
| 5 | 法蘭 Flange |
| 5a | 法蘭固定螺絲 Flange fixed screw |
| 5b | 法蘭防塵封 Ram wiper seal |
| 5c | 法蘭防油O型圈Flange oil proof O-RING |
| 6 | 聯结板 Linking Board |
| 6a | 聯結板固定螺絲 Linking Board Fixed Screw |
| 7 | 上電熱板Upper Electric Heating plate |
| 7a | 上電熱板固定螺絲 Fixed screw of upper electric heating plate |
| 7b | 上隔熱板Upper insulation plate |
| 8 | 下電熱板 Lower electric heating plate |
| 8a | 下電熱板固定螺絲 Fixed screw of lower electric heating plate |
| 8b | 下隔熱板Lower insulation plate |
| 9 | 滑軌道 Sliding rail |
| 9a | 滑軌道固定螺絲 Fixed screw of sliding rail |
| 10 | 出入模板 Exit & inlet of molding plate |
| 11 | 立柱 Chrome neated vectical post |
| 11a | 立柱羅帽(大)Vectical post nut (large) |
| 11b | 立柱羅帽防松羅絲 Vectical post lock nut |
| 11c | 立柱螺帽(小)Vectical post nut (small) |
| 12 | 無油軸承座 Oil free bearing seat |
| 12a | 無油軸承座固定螺絲 Fixed screw of oil free bearing seat |
| 12b | 無油軸承 Oil free bearing |
| 12c | 無油軸承O型扣環O-RING of oil free bearing |
| 12d | 無油軸承防塵封 Dust proof seal of oil free bearing |
| 13 | 子缸(輔助油壓缸)Auxiliary hydraulic cylinder |
| 13a | 子缸與中座固定螺絲 Sub-cylinder and middle seat fixed screw |
| 13b | 子缸與主缸固定螺絲Sub-cylinder and master cylinder fixed screw |
| 13c | 子缸防塵封Sub-cylinder dust proof seal |
| 13d | 子缸法蘭油封Sub-cylinder flange oil seal |
| 13e | 子缸活塞油封 Sub-cylinder piston oil seal |
| 13f | 子缸防油O型圈Sub-cylinder oil proof O-RING |
| 機型 Type | 100Ton | 150Ton | 200Ton | 250Ton | 300Ton | 350Ton | 400Ton | 500Ton | 600Ton | 800Ton 1000Ton |
| 出力 Clamping force (Ton) | 100 | 150 | 200 | 250 | 300 | 350 | 400 500 | 600 | 800 | 1000 |
| 行程 Stroke (mm) | 350 | 300 | 250 | 250 | 250 | 300 | 300 300 | 300 | 400 | 400 |
| 臺面 Heating plate size (mm) | 450x460 | 460x460 | 546x560 | 642x600 | 642x650 | 750x750 | 800x800 | 900x900 950x950 | 1200x1200 1500x1500 | |
| 缸徑 Diameter of clinder (mm) | 250 | 300 | 350 | 400 | 450 | 500 | 500 560 | 600 | 700 | 800 |
| 馬達功率 Motor Power (KW) | 5.5x2 | 5.5x2 | 7.5x2 | 7.5x2 | 9.7x2 | 9.7x2 | 9.7x2 | 15x2 15x2 | 20 | 25 |
| 開模型式 Type of mold opening | 上升下降-出入模-軌道-2RT-3RT-4RT Up/Down-In/Out-Rail-2RT-3RT-4RT | 上升下降-出入模-2RT-3RT-4RT Up/Down-In/Out-2RT-3RT-4RT | 上升下降-出入模 Up/Down-In/Out | |||||||
| 電熱功率 Heating power (kw) | 18 | 18 | 27 | 38 | 37 | 44 | 47 56 | 64 | 55 | 85 |
| 總電力 Total power (kw) | 29 | 29 | 42 | 53 | 57 | 64 | 64 78 | 86 | 70 | 100 |
| 重量 Gross weight (ton) | 5.1 | 5.5 | 7 | 9 | 10.5 | 14 | 16 20 | 23 | 28 | 35 |
| 機臺尺寸 Machine Size (m) FTMO: 2.6x2.15x2.12.8x2.1x2 | RTMO: 2.6x2.15x2.12.8x2.2x2 | 3x2.4x2.1 3x2.3x2.1 | 3.3x2.5x2.2 3.3x2.5x2.2 | 3.4x2.7x2.2 3.4x2.7x2.2 | 3.5x2.8x2.4 | 3.6x2.9x2.6 4x3.1x2.7 | 4.3x3.2x2.8 | 3x4.3x3.1 | 3.6x5.2x3.5 |
LIHS 30\~300(Ton)-NTMO
特點介紹 Features
① 機體結構 Block structure
采用高級(F.C.D)材料鑄造，强度高，加工精細，永保機臺精度穩定，壽命長，能長時間使用不變形。
Cast of high-grade FCD material with high strength, finely processed to maintain stable precision of the machine constantly, providing long service life and allowing long-time service without deformation.
② 特别模板設計 Special board form design
雙滑模(1塊上模2塊下模)，取/放件更方便，大大增加生産效率。可選配斷熱水板+隔熱玻璃纖維板，减少因模具熱轉移而影響機臺穩定性。
Double slip mold plates (1 upper in board form and2 lower plates), allowing more convenient removal/placingand increasing production higher efficiency.
Optional hot water disconnecting board andthermal insulating glass fiber plate solveing the influence on machine stability due to mold heat transfer.
③直立式鎖模及直立式注射
Upright mold locking and upright injection 下固定模板無上下移動，確保機器和模具精度的耐久性。 Lower fixed mold plate free from moving up and down, ensuring constant as well as precision for machine and mold.
④入料系統Material supply system
專業料管設計及LSR專用供料系統，確保A、B膠料按1:1精准計量并充分混合，達至最佳效果。
Specialized feeding pipe design and LSR exclusive feeding system to ensure accurate metering and mixing of rubber materials A and B at ratio of 1:1 to the maximum effect.
⑤射出量控制Injection volume control
采用高精密度德制電子尺設計，能准確的控制與計算射出量之大小。
A design incorporating a high precision optical ruler, makes in Germany, is adopted. The injection volume can be calculated and controlled precisely.
LIHS立式液態硅膠射出成型機 LIHS 30\~300(Ton) NTMO Liquid Silicone Injection Machine
技術参數 Specifications
| 機型 Type | Unit | 30Ton | 60Ton | 100Ton | 200Ton |
| 螺杆直徑 Screw Dia. | mm | 35 | 35/45 | 45 | 50 |
| 理論注射容積 Theory Injection Volume | cc | 100 | 100/250 | 250 | 400 |
| 注射壓力 Injection Pressure | kgf/cm² | 400 | 400 | 400 | 400 |
| 螺杆轉速 Screw Speed | rpm | 0~130 | 0~130 | 0~160 | 0~160 |
| 最大射出率 Max. Injection rate | cc/s | 150 | 200 | 150 | 220 |
| 鎖模力 Clamping Force | kN | 300 | 600 | 1000 | 2000 |
| 開模行程 Mould Opening Stroke | mm | 250 | 300 | 300 | 350 |
| 模板間距 Daylight of Platen | mm | 350~450 | 400~500 | 400~500 | 470~600 |
| 最小模厚 Distance Btwn Tie Bars | mm | 100 | 100 | 100 | 120 |
| 模板尺寸 Platen Dimension | mm | 400x400 | 500x500 | 600x550 | 700x650 |
| 馬達功率 Motor Power | kW | 7.5 | 11 | 15 | 22 |
| 電熱功率 Heater Plate Power | kW | 0 | 0 | 0 | 0 |
| 系統壓力 System Pressure | kgf/cm² | 150 | 160 | 140 | 200 |
| 機器重量 Machine Weight | ton | 4 | 5.5 | 6.5 | 9 |
| 機臺尺寸 Machine Size | m | 2x1.8x3.2 | 2.5x1.9x3.8 | 2.7x2x4.1 | 2.9x2.2x4.4 |
| 真空泵 Vaccum Pump | (選配 Option) | ||||
| 電熱板 Heater Platen | (選配 Option) |
⑥ 安全設計 Safety design
備有紅外綫安全電眼，并具有全自動警告系統及多重安全防護裝置，可清楚掌握機臺狀况，確保安全。
A light curtain, made in Japan, is available. An automatic warning system is available. It monitors the status of machine in order to provide extra protectionto assurs the operation safety for operators.
應 用 Application
工業上如：
油封、鍵盤按鍵、電器絕緣料、汽車零件……
生活用品如：
奶嘴、人工導管、呼吸器、蛙鏡、皮鞋、球鞋内墊、 食品容器……
In industrial sectors like:
Oil seal, keyboard key, insulating material for electrical devices, automobile components, etc.
Household goods sectors like:
Nipple, artificialcatheter, respirator,diving mask, leather shoes, sneaker insole, food container, etc.
⑦油路設計 Hydraulic system design
采用電液伺服系統，低噪音，節能，壓力精準穩定。 Equipped with an electro-hydraulic servo system, it features low noise, energy efficiency, and precise stable pressure.
LIVS 100\~500(Ton)-FTMO-2RT
特點介紹 Features
① 機體結構 Block structure
采用高級(F.C.D)材料鑄造，强度高，加工精細，永保機臺精度穩定，壽命長，能長時間使用不變形。
Cast of high-grade FCD material with high strength, finely processed to maintain stable precision of the machine constantly, providing longservice life and allowinglong-time service without deformation.
②直立式鎖模及直立式注射
Upright mold locking and upright injection
下固定模板無上下移動，確保機器和模具精度的耐久性。
Lower fixed mold plate free from moving up and down, ensuring constant as well as precision for machine and mold.
③入料系統 Material supply system
專業料管設計及LSR專用供料系統，確保A、B膠料按1:1精准計量并充分混合，達至最佳效果。
Specialized feeding pipe design and LSR exclusive feeding system to ensure accurate metering and mixing of rubber materials A and B at ratio of 1:1 to the maximum effect.
④ 射出量控制Injection volume control
采用高精密度德制電子尺設計，能准確的控制與計算射出量之大小。
A design incorporating a high precision optical ruler, makes in Germany, is adopted. The injection volume can be calculated and controlled precisely.
\*本公司保留修改外觀和技術參數的權利，恕不另行通知。
立式液態硅膠射出成型機
LIVS100\~500(Ton) 2RT From Top Mold-Open Liquid Silicone Injection Machine
| 機型 Type | Unit | 100Ton | *本公可保留修改外觀和技術参数的權利，恕不男行通知。 200Ton | 300Ton |
| 螺杆直徑 Screw Dia. | mm | 45 | 50 | 55 |
| 理論注射容積 Theory injection volume | cc | 250 | 400 | 500 |
| 注射壓力 Injection Pressure | kgf/cm² | 400 | 400 | 400 |
| 螺杆轉速 Screw Speed | rpm | 0~120 | 0~120 | 0~130 |
| 最大射出率 Max. Injection rate | cc/s | 130 | 160 | 210 |
| 鎖模力 Clamping Force | kN | 1000 | 2000 | 3000 |
| 開模行程 Mould Opening Stroke | mm | 300 | 350 | 350 |
| 模板間距 Daylight of Platen | mm | 400~500 | 470~600 | 500~600 |
| 最小模厚 Distance Btwn Tie Bars | mm | 100 | 120 | 150 |
| 模板尺寸 Platen Dimension | mm | 550x600 | 600x650 | 650x700 |
| 馬達功率 Motor Power | kW | 11 | 11 | 15 |
| 電熱功率 Heater Plate Power | kW | 0 | 0 | 0 |
| 系統壓力 System Pressure | kgf/cm² | 200 | 200 | 160 |
| 機器重量 Machine Weight | ton | 5.5 | 7 | 9.5 |
| 機臺尺寸 Machine Size | m | 1.6x2.5x3.2 | 1.8x2.7x3.6 | 1.9x2.8x3.8 |
| 電熱板 Heater Platen | (選配 Option) | |||
| 真空泵 Vaccum Pump | (選配 Option) |
⑤ 安全設計 Safety design
備有紅外綫安全電眼，并具有全自動警告系統及多重安全防護裝置，可清楚掌握機臺狀况，確保安全。
A light curtain, made in Japan, is available. An automatic warning system is available. It monitors the status of machine in order to provide extra protection to assurs the operation safety for operators.
⑥油路設計 Hydraulic system design
采用電液伺服系統，低噪音，節能，壓力精準穩定。
Equipped with an electro-hydraulic servo system it features low noise, energy efficiency, and precise stable pressure.
(選配Option)
汽門嘴專用熱壓成型機
Tire Valves Hydraulic Molding Machine
特點介紹 Features
①機型 Type: 300 tons
② 馬達功率Motor Power:2x9.7KW
③ 行程 Stroke: 300 mm
④ 工作臺面Heating plate size:580x580mm
⑤針對汽門嘴成品特性專門設計良品率高效率快 Designed for tire valves, High yield and efficient.
機臺動作流程 Flow of machine motions
1. 裝模
Setup the mold.
4. 主缸下降
2. 入模 Load the mold.
3. 主缸上升，加壓成形Main ram goes up and press.
Main ram goes down.
5. 出模 mold out.
6. 前頂模上升，取成品
Front top mold plate goes up, then take out the finished products out.
高精密橡(矽)膠切條機
High Precision Rubber (Silicon) Cutting machine
一般橡膠切條機General Rubber Cutting Machine
矽橡膠切條機 Silicon Rubber Cutting Machine
橡膠稱重篩選切條機 Rubber Weighing, Sorting & Strip Cutting Machine
特點介紹 Features
① 馬力Horse Power:2.2kw(橡膠);1.5kw(矽膠)
② 機臺尺寸Measurement:長1080 X寬900 X高1230(mm)
③ 機臺重量 Weight:620Kg
④ 切膠寬度 Slicing Width:1mm\~50mm
⑤ 切膠長度 Slicing Length:≤580mm
6 切膠厚度Slicing Thickness: ≤12mm
⑦電控系統Control System:脉波產生器PLC Pulse modulation PLC
8 計數器Counter:液晶顯示器，可做1\~9999設定1\~9999 LCD
機體結構 Machine structure:
9 鑄造式側板及底板，强度及穩定性佳 Slab-side and botton are made by cast iron, strong and stable.
10切膠時安静無聲，切膠准確100% Noise-free when cutting. 100% cutting accuracy.
①機型：JXQ-2
適用範圍：橡膠片料
② 條料範圍：條料長度150-580mm，條料寬度40m以内自由設定料厚度1.5-11mm
③膠料硬度：膠料硬度60-90度不粘刀膠料
④模式：稱重模式/長度模式
⑤功能：自動切條，稱重，篩選，傳輸至輸送帶.
⑥效率：稱重模式為25-40條/每分鐘，長度模式為80條/每分鐘
⑦切條部分：高精度重型導軌，步進系統，刀架電系統.
⑧ 稱重部分：用高精密壓力感測器，可以精確確定稱重的重量，精度在±0.1g，自動矯正，補償切條寬度，讓重量始終控制在有效範圍.
9剔除部分：氣缸自動剔除
10外觀尺寸：890mm\*1040mm\*1470mm
1电源：220V 2.5KW
1.機臺采用卧式結構，機臺操作高度極大降低，方便操作，便于更换模具及維護。
2.機臺生產過程完全在安全外罩内進行，更加完全。
3.機臺通過中板動作，中心動作，模具吹氣等功能可以實現自動開模取產品功能。
4.機臺可以實現自動噴脱模劑功能，滿足不同產品的生產需求。
5.機臺可以實現自動供料功能，提高生產自動化效率。
6.機臺配備完善的自動化生產程序，可以提供有人和無人工作模式，供客户選擇。
7. 主油缸左右開模采用電子尺控制及比例壓力控制系統，可實現多級速平穩可調。
8.先進先出射料方式；射膠量精確，多級多速，射出壓力可調。
1. machine adopts horizontal structure, greatly reducing the height of the machine operation, convenient operation, easy replacement and maintenance of the mold .
2. machines in the production process is completely safe housing be more complete.
3. machine action by the board, the central action, blowing mold andother functions can be automatically mold to take the product features.
4. machinecan automatically sprayrelease agent functions to meet the production needs of different products .
5. machine can realize automatic feeding function, improve the efficiency of production automation.
6. machine equipped automated production process, can provide manned andunmanned mode, for customers to choose.
7. aroundthe master cylinder mold electronic foot control and proportionalpressure control system, multi-level speed smoothly adjustable.
8. FIFO shot material way; Injection volume precision, multi-level multi-speed, injection pressure is adjustable.
高精密度全自動卧式硅膠射出成型機Automatic Silicon Rubber Injection Molding Machine
| 鎖模力 | Clamping Force | ton | 25 | 50 | 100 | 200 | 200(special) | 300 |
| 開模力 | Mold Open Force | ton | 5 | 5 | 5 | 5 | 5 | 6 |
| 主缸行程 | Main Ram Stroke | mm | 300 | 300 | 430 | 480 | 480 | 600 |
| 模板間距 | Platen of Daylight | mm | 500 | 500 | 650 | 700 | 750 | 850 |
| 最小模厚 | Min.Mold Thickness | mm | 200 | 200 | 220 | 220 | 270 | 250 |
| 頂針行程 | Ejector Rod Stroke | mm | 100 | 100 | 100 | 110 | 200 | 150 |
| 顶出力 | Ejector Rod Force | ton | 4 | 4 | 4 | 7 | 7 | 7 |
| 立柱内間距 | Net Column Spacing | (HxW)mm | 300 x350 | 325 x400 | 345×455 | 500 × 600 | 500 ×600 | 600 × 700 |
| 射出量 | Injection Volume | cc | 200 | 350 | 700 | 700 | 700 | 700 |
| 射出壓力 | Injection Pressure | kgf/cm² | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 |
| 射出率 | Injection Rate | cc/s | 38 | 38 | 60 | 90 | 90 | 90 |
| 螺杆轉速 | Screw Rotation Speed | r.p.m | 45 | 45 | 55 | 85 | 85 | 85 |
| 電機功率 | Motor Power | kW | 8.3 | 8.3 | 11 | 18.5 | 18.5 | 18.5 |
| 煤油電熱功率 | Oil Heater Power | kW | 2 | 2 | 2 | 5 | 5 | 5 |
| 機臺净重 | Net Weight | ton | 3 | 3.5 | 5 | 8.5 | 9 | 11.5 |
S-25/50/100/200/300SR
Rubber automatic feeding system
Japan imported electronic system
Silicon rubber automatic feeding system
高精密度全自動卧式硅膠射出成型機Automatic Silicon Rubber Injection Molding Machine
1）合模加壓，注射膠料，硫化
1) Close mold, boost pressure, inject rubber, curing
2）射缸后退，開模后定位
2) Reverse injection cylinder, position the mold after open it
3）拍模頂杆頂出，推動頂針推出產品
3) Beat the ejector out, push ejector pin to push out the projector
4）拍模頂杆后退，產品落入料箱
系統自檢完成后，自動開始下一生產周期
Beat the ejector to reverse it, the product will fall in the material tank system, after self-inspection is finished, the system will proceed to the next production cycle.
HS600(Ton)-FTMO-2RT
佳鑫工程研發能力卓越，可依客户需求特制各式功能機種，配合客户生產應用。 JIAXIN owns very stronge and outstanding R&D capability. In order to match your production, we can design and manufacture various kinds of machines that fullfil for your requirements.
注壓機
Hydraulic Transter Molding Machine
特點介紹 Features
① 采用比例油路，射出速度及壓力可調節。 A full-scale oil system is adopted, injection speed and pressure can be adjusted。
②適用于形狀復雜，但膠料流動性良好的制品成型。 Applicable to more complicated products, but the rubber molding products with good mobility.
③ 可選擇使用2RT/3RT/4RT前頂開模功能。 Option of using the 2RT/3RT/4RT front Top Mold-Open Function.
④如需吊模槽，請特别提出。
Please advise of mold hanging lot is required.
規格 Specification
| 機型 | Type | 100Ton | 150Ton | 200Ton | 250Ton | 300Ton |
| 出力 | Clamping force (Ton) | 100 | 150 | 200 | 250 | 300 |
| 行程 | Stroke (mm) | 350 | 300 | 250 | 250 | 250 |
| 臺面 | Heating plate size (mm) | 450x460 | 460x460 | 546x560 503x508 | 642x600 | 642x650 |
| 最大射出量 | Injection Volume Max. (cc) | 350 | 500 | 800 500 | 1000 | 1000 |
| 最大注射壓力 Injection Pressure Max.(kgf/cm²) | 1500 | 1500 | 1500 | 1500 | 1500 |
周邊設備
走 進 佳 鑫
1. 寬闊的廠房和精良的技術，生產陣容强大。 Main production area
2. 教育培訓，放眼未來。Traning for future
3. R&D部門，提升技術能力，配合客户需求。 Strong R&D capability
4-9.擁有先進的加工機器，配合機臺大小零件的加工， 確保零件的精准及生產工時，更可降低加工成本。 Advance and sophisticated assembling equipment for lower cost as bast as higher efficiency andeffectiveness 佳鑫电子设備科技(廣東)有限公司 XIN ELECTRONIC EQUIPMENT & TECHNOLOGY (GUANGDONG) CO., LTD.
香港總公司 Hongkong Head Office
地址: 香港新界沙田小沥源安耀街3号汇达大厦10楼16\~18室
Add: Rm 1016-1018, 10/F Delta House, 3 On Yiu Street, Siu Lek Yuen, Shatin, N.T., H.K.
电话 Tel: 852-2664 9688传真 Fax: 852-2664 5683
佛山工廠 FOSHAN Factory
地址:广东省佛山市南海区丹灶镇工业大道31号 Add: Fullwell Science and Technology Park No. 5 Xinyu Road, Xinqiao Street, Baoan Area, Shengzhen City, Guangdong, 电话 Tel: 0757-86605056 /13560713339
网址 web: www.jiaxin-sz.com.cn
