[Puttyandlatex paint]definedanage ofindustrial efficiency，respondingto the explosive housing needsof urbanization. [145#Inorganic materials] representthe next upgrade inmodern living standards.

Huadestandsattheforefrontofanewevolution一wherewalldecorationtranscendsutilityand entersaneraofbalanced performanceandaesthetics,
continually redefining the limits of quality and beauty.

01
145#MasonryMortar 01

02

03 145#Thin-CoatPlasterMortar

03

145# Concrete Specialty Mortar 05

04
07 145#WaterproofMortar

TTllieg Conneer

05

145#Thermal Insulation Mortar 09

06
145# Wall & Floor Tile Specialty Mortar 11
07
13 145#PearlWhite

08 IUA
145#Moonlight White 15 09 17 145# Moonlight White Pro+
10 时 MES
TaorminaLuxuryLeather FinishSeries 19
(Soft-touch Finish) 11
23 Pacific Golden Stone Series (Han White Stone / Yellow Dragon Stone)
12
Liquid Inorganic Coating 25
(InorganicMineral Mortar) 13 27 WaterproofRepairMortar
14

Supporting Materials 29

15
32 Consumption Reference

ProductList

Masonry 145#Masonry Mortar 145#Thin-Coat Plaster Mortar Plastering 145#Thin Wet-Process Specialty Mortar 145# Waterproof Mortar 145# Thermal Insulation Mortar Miaiailrtiis Tile 145# Wall &Floor Tile Specialty Mortar Installation 145# Pearl White (Construction Grade) Intermediate145#MonlightWhite(DecorationGrade) Coat 145# Moonlight White Pro+ Prri tirrtee Taormina Luxury Skin Series (Soft-Touch Finish) Finish Coat sihnanerfrinisssts (rargllr lrierei laiiiirs) Waterproof Repair Mortar Waterproof Accelerator (Polymer Waterproof Mortar, Component B) Curing Accelerator (Penetrating Mortar,Component B) Anti-Stain Accelerator (Stain-Resistant Mortar, Component B) Adhesion Promoter (High-Penetration Mortar, Component B) S2 Waterproof Jointing Adhesive (S2 Waterproof Jointing Mortar) Crack Repair Agent (Crack Repair Mortar, Component B)

ProcessLayer

①Masonry Mortar Usedasa replacement forcementmortar inmasonry constructionSuitable for fired bricks (red bricks,shale bricks),sand-lime bricks,aerated concrete blocks,and similar materials ② Thin Plaster Mortar/Moonlight White 桦德时代 Pro+ HUADETIMES Replaces cement mortar ^ + waterproofing layer.Suitable forwallsmade of fired bricks,sand-lime bricks,and aerated concrete blocks.Superior to crack-resistant mortars,tileadhesives,and levelingmortars ③ Wall&FloorTileSpecialtyMortar Replaces tileadhesive ^ + back-coating adhesive Tiled Finish ④ Moonlight White/Han White Stone/ 桦德时代 Yellow Dragon Stone/Moonlight White HUADETIMES Pro+ Replacesputty layer ^ + waterproofing layer (for nonspecial applications) Superior to water-resistant putty,shell powder coatings, bone slurry,gypsum-hased materials,and other traditional materials ⑤ Luxury Leather Finish / Han White Stone /YellowDragonStone/MoonlightWhite / Moonlight White Pro+ Replacesartistic coatings,imitation stone coatings,and textured coatings Artistic TexturedFinish H1桦德时代 ⑥ Moonlight White/Moonlight WhitePro+ Replacesputty layer ^ + waterproofing layer (fornon-special applications).Superiorto waterproof putty,shellpowder coatings, gypsum-based materia,and other traditional materials ⑦ Liquid Inorganic Coating (InorganicMineralMortar) Replaces latex paint and childrens paint /conventiona paints. Flat Coated Finish

Thin-CoatApplication/High Adhesion Shortened Construction Time Waterproof& Anti-Efflorescence High Compressive Strength

[Product Information]

Product Name: Kunde145# Marble Mineral \*Fire-Resistant&Anti-Seepage\* Two-Component Masonry Mortar
Specification: Bagged;two-component system;Component A 2 5 {kg } x 4 + Component 8 2 5 {kg } x 1 = 1 2 5 {kg } /set
Product Description:The 145# Masonry Mortar is suitable for wall masonry in various building structures (non-cast-in-place walls).It replaces traditional cement mortar,improving construction efficiency and cost-effectiveness. Applications:Suitable for fired bricks (red bricks,shale bricks),sand-lime bricks,aeratedconcreteblocks,etc.
Main Composition:Calciumcarbonate >=slant 8 5 % （204号

[R&D,TestingBasisorApplicableStandards]

GB/T25181-2019<Pre-mixed Mortar>,M5
GB 8624-2012<Classification for Burning Behavior of Building Materials and
Products>,ClassA(A1)
GB6566-2010<Limits ofRadionuclides in Building Materials>

[KeyParameters]

Water retention:99.6%;28-day compressive strength:7.0 MPa; Freeze-thaw strength loss:18%;mass loss:3%; Radioactivity:0.1IRa,0.2 lr

[Instructions for Use]

Store in a dry place to prevent moisture exposure.

Applicable to:mosttypes of masonry structures,including fired bricks(red bricks,shale bricks),sand-lime bricks,aerated concrete blocks,etc.

No pre-wetting of blocks or water curing is required before orafter masonry construction.

Under prolonged high-temperature exposure,if the surface temperature of masonry units exceeds the allowable construction temperature,it is recommended to cool the blocks beforeapplication.

During masonry,the surface of the blocks should be free of water to avoid affecting bonding strength.

Mixing ratio:(A:B:water = 4 : 1 : 1 * ).Depending onambient temperature,a10-15% variation inwater content is permissible.
Mixing sequence:Add water according to the ratio $$ add Component $\mathsf { B } \longrightarrow$ mix thoroughly $$ add ComponentA mix thoroughly.
Aftermixing,allowthemixture to rest (for full reaction):mixfor3minutes $$ restfor2 minutes $$ mix again for1minute.After mixing,the material should be used within120 minutes.Do not add water again during application.
It is recommended to use the two-line four-edge method to better highlight costefficiencyadvantages.

[ConsumptionReference]

Onesetof material(Component) A 2 5 x 4 + Component B 2 5 = 1 2 5 {kg } cancover approximately 3 5 - 4 5 m ^ { 2 } foraeratedconcreteblocks.
Onesetofmaterial(ComponentA 2 5 x 4 + ComponentB 2 5 = 1 2 5 {kg } cancover approximately15-20m²forshalebricks.

145# Thin-Coat PlasterMortar

Anti-hollowing & Crack Resistance Fireproof & Waterproof / Anti-efflorescence Ultra-high hardness /No mesh required, no curing required / Shortened construction time

[Product Information]

Product Name: Kunde145# Marble Mineral Fire-Resistant& Anti-Seepage TwoComponentThin-CoatPlasterMortar
Specification: Bagged two-component system; Component A 2 5 \mathsf {kg } + Component B 8 . 5 \mathsf {kg } = 3 3 . 5 \mathsf {kg } / set
Product Description:The 145#Thin-Coat Plaster Mortar overcomes common issues of traditional cement mortars suchas efflorescence and hollowing,and is suitable for plastering applications in most building structures.It complies with current national requirements for thin-coat application technology.
Applications:Suitable for fired bricks (red bricks,shale bricks),sand-lime bricks, aerated concrete blocks,wall panels,and similar substrates (superior to crackresistant mortars,tile adhesives,and leveling mortars).

[R&D,TestingBasisorApplicableStandards]

GB/T 25181-2019 Pre-mixed Mortar,M5GB 8624-2012 Classification for Burning
Behaviorof Building Materials and Products,ClassA(A1)
GB 6566-2010 Limits of Radionuclides in Building Materials
JC/T984-2011Polymer Cement Waterproof Mortar,Type l

[KeyParameters]

Waterretention: 99.8%;14-day tensile bond strength:0.76 MPa;28-day compressive strength:9.9 MPa;28-dayshrinkage rate:0.13%;Freeze-thaw strength loss:13%;mass loss:2%;Radioactivity: 0.1 IRa, O.3 Ir;lmpermeability pressure (7 days): 0.5 Mpa.

[lnstructions for Use]

Store in a dry indoor environment to prevent moisture exposure.

Before application,the wall does not require pre-weting,and no water curing is needed afterconstruction.

The wall substrate should be solid and free of hollowing,with flatness meeting specification requirements.

Under prolonged high-temperature exposure,if the wall surface temperature exceeds theallowable construction temperature,it is recommended to cool the wall surfacebeforeapplication.

Water ratio: (A:B:water = 3 : 1 : 0 . 8 ) .Depending on ambient temperature,a10-15% variationinwatercontentispermissible.

Mixing sequence:Add wateraccording to the ratio $$ add Component $\mathsf { B } \to$ mix thoroughly $$ add Component A mix thoroughly.

Aftermixing,allow thematerial to rest (for full reaction):mix for3 minutes $$ rest for 2 minutes $$ mix again for1minute.

After the first coat is fully dry(approximately7 hours),the second coat can be applied. After mixing,the material should be used within 120 minutes.Do not add water again during application.

ded plaster thickness should not exceed 1 0 \mathsf {mm } ,with an optimal

thickness of 5mm

[ConsumptionReference]

Thickness:approximately3-5mm;consumption:approximately4.35-7.25kg/m One set of material (Component A 25 + Component B8.5 = 33.5kg) cancover approximately4.6-7.7m2

145# Concrete Specialty Mortar

W 混凝土专用灰浆坤德环保 执行标准：GB/T25181-2019使用充分搅拜均匀至无颗粒流状聚体！ 充分搅择均匀可使用

For Concrete Applications / Strong Adhesion Waterproof & Moisture-Resistant Floor Slabs, Walls& Ground Surfaces Cast-in-Place Walls, Basements
Outdoor Flooring Negative- Miaeaa aesseae Side Interior Wall eesss ① ② WaterproofingoftheNegative-Side 1.Penetratingcrystallineinterfaceagent-1coat 1.Concretespecialtymortarleveling
InteriorSurfaceof BasementConcreteWalls 2.Moisture-resistantcoating-2coats layer-5-15mmthick 3.Polyurethanewaterproofcoating2oats/odifed 2.Waterproofrepairmortar-1coat, bitumenmembrane-1layer 1.2-1.6mmthick(optional) 4.Fineaggregateconcreteprotectivelayer-5-10cmthick 5.Cementmortarlevelinglayer-5-20mmthick 6.Fiberglassmesh 7.Interior wall putty-2coats

[Product Information]

Product Name: Kunde145# Marble Mineral Fire-Resistant&Anti-Seepage TwoComponent Concrete SpecialtyMortar
Specification: Bucket packaging; two-component system; Component A15 kg + Component 8 5 \mathsf {kg } = 2 0 \mathsf {kg } /set
Product Description:The 1 4 5 \# Concrete SpecialtyMortar isa high-performance modified mortar,primarily used for concrete structures requiring high impermeability. Itfeatures high strength,rapid setting,excellent adhesion,and strong crack resistance. Applications: Suitable for concrete shear walls,beams and columns,floor slabs,roofs, and other cement-based premixed mortar applications in construction projects. Applicable to both interiorand exterior concrete structures,including vertical and horizontal surfaces as well as underground engineering.
Main Composition: Inorganic materials >=slant 9 9 % （20

[R&D,TestingBasis orApplicable Standards]

GB/T25181-2019Pre-mixed Mortar,M5
GB 8624-2012 Classification for Burning Behavior of Building Materials and Products,
Class A (A1)
GB6566-2010 Limitsof Radionuclidesin BuildingMaterials
JC/T984-2011Polymer CementWaterproof Mortar,Typel

[KeyParameters]

Water retention: 99.8%;Impermeability pressure (7 days):1.1 MPa;14-day tensile bond strength:0.76 MPa;28-day compressive strength:9.9 MPa;28-day shrinkage rate: 0.13%;Freeze-thaw strength loss:13%; mass loss: 2%;Radioactivity: 0.11 IRa, 0 . 3 \mathsf { I r }

[lnstructions for Use]

Store ina dry indoor environment to prevent moisture exposure.

Before application,ensure the substrate surface is clean,level,free of oil,and free of loose particles.Damp substrates are acceptable,but surfaces with standing water are notsuitable forapplication.

The wall substrate should be solid and free of hollowing,with flatness meeting specification requirements.

Before use,thewall does not require pre-wetting,and no curing is required after application.

Water ratio: (A:B:water = 3 : 1 : 0 . 8 .Depending onambient temperature,a 10-15% variation inwatercontent ispermissible.

Mixing sequence:Add water according to the ratio $$ add Component $\mathsf { B } \to$ mix thoroughly $$ add Component \mathsf { A } \to mix thoroughly.

After mixing,allow the material to rest (for full reaction):mix for 3 minutes $$ restfor2 minutes $$ mixagainfor1minute.

After the first coat is fuly dry (approximately 7 hours),the second coat can be applied. After mixing,the material should be used within 120 minutes.Do not add water again during application.

The recommended plaster thickness should not exceed 1 5 \mathsf {mm } ,with an optimal

[ConsumptionReference]

Thickness:approximately3-5mm;consumption:approximately4.35-7.25kg/m2 One set of material (Component A15 + Component B5= 20 kg) can cover approximately2.7-4.5m2

aeeeean

07

1.Applymoisture-proof coating,2layers
2.Applypolyurethanewaterproof coating,2layersof,orSBS
modifiedbitumenmembrane,1layer
3.Fineaggregateconcreteprotectivelayer,5-10cmthick
4.Cementmortarlevelinglayer,5-20mmthick
5.Fiberglass mesh cloth
6.Apply puttyoninner wall,2 layers

1.Waterproofmortarleveling layer,5-15mm thick 2.Waterproofrepairmortarapplied2layers, 1.2-1.6mm thick(optional)

[Product Information]

Product Name:Kunde145 Marble Mineral ^ { \star } Fireproof&Waterproof Coating \star TwoComponentDryPowder \star WaterproofMortar
Specification:Packed in bucket,two components:Amaterial 1 5 \mathsf {kg } + \mathsf { B } material 5 \mathsf {kg } = 20kg/set
Product Description:Waterproof mortar isa high-performancemodified mortar,used aftermixing withwater.It has excellent impermeability，effectively preventing water penetration. Itfeatures strong waterproofing, highstrength，resistance to hollowness andcracking，and anti-efflorescence properties.
ApplicationScenarios:Suitable forwaterproofingareassuchas
kitchens，basements，swimming pools,roofs，and water tanks.Applicable on brick,cement mortar，and plaster substrates.Forboth indoor and outdoor use. Main Component: Inorganic materials >=slant 9 9 % （204号

[R&D,Testing BasisorApplicable Standards]

GB/T25181-2019 Pre-mixed Mortar,M5
GB 8624-2012 Classification for Burning Behavior of Building Materials and Products,
Class A (A1)
GB 6566-2010 Limits of Radionuclides in Building Materials
GB/T 55030-2022 General Code for Waterproofing of Building and Municipal
Engineering
JC/T 984-2011Polymer Cement Waterproof Mortar
JGJ/T70-2O09 Standard for Test Methodsof Basic Properties of Building Mortar

[KeyParameters]

Water retention: 99.8%;Impermeability pressure (7 days):1.1 MPa;28-day compressive strength:9.9 MPa;28-dayshrinkage rate: 0 . 1 3 % Bondstrength (7days):1.2MPa;Freezethaw resistance:no cracking or spalling;Water absorption:3.1%;Radioactivity:0.11 IRa, 0 . 3 { ~ l r } （204号

[Instructions for Use]

Store ina dry indoor environment to prevent moisture exposure.

Beforeapplication,ensure the substratesurface is clean,level,free of oil,and free of loose particles.Damp substrates are acceptable,but surfaces with standing water are notsuitable forapplication.

The wall substrate should be solid and free of hollowing,with flatness meeting specification requirements.

Before use,the wall does not require pre-wetting,and no curing is required after application.

Waterratio: ( \mathsf { A } : \mathsf { B } : \mathsf { w a t e r } = 3 : 1 : 0 . 8 ) .Dependingonambient temperature,a10-15% variationinwatercontentispermissible.

Mixing sequence:Add water according to the ratio $$ add Component $\mathsf { B } \longrightarrow$ mix thoroughly $$ add Component \mathsf { A } \longrightarrow \mathsf { m i x } thoroughly.

Aftermixing,allow the material to rest (for full reaction):mix for 3 minutes $$ rest for 2 minutes $$ mixagainfor1minute.

After the first coat is fully dry(approximately7 hours),the second coat can be applied.After mixing,the material should be used within 120 minutes.Do not add water againduringapplication.

The recommended plaster thickness should not exceed 1 5 \mathsf {mm } ,with an optimal thickness of 5 mm.

[Consumption Reference]

Thickness:approximately3-5mm; consumption:approximately 4.35-7.25 kg/m² Oneset of material (Component A ^ { 1 5 + } Component B 5 = 2 0 1 {kg } cancover approximately 2 . 7 { - } 4 . 5 m ^ { 2 }

145#Thermal Insulation Mortar

\*Thethicknessofthethermalinsulationlayershouldbedeterminedaccordingtodesignrequirements. \*Underequivalentnsulationdesigiteateperformanceof145#alIsultionMortarisinificantlysuperiortoopable productsonthemarketAcordingtotheatioaltandardGB047321BuildingTeralsulationMortathreqdtal conductivityis <=slant 0 . 0 7 0 W/(m·K)，whilethetestedthermalconductivityof145#Thermallnsulationortaris.0511W/(mK).

[Product Information]

Name: Kunde145# Marble Mineral Fireproof& Impermeable Two-ComponentThermal InsulationMortar

Specification: Bagged two-component system, Component A25kg ^ + Component B8.5kg \mathbf { \Sigma } = \mathbf { \Sigma } 3 3 . 5 \mathsf {kg } perset

Product Description:145#thermal insulation mortar isa high-performance modified mortarwith excellent thermal insulation properties,which can effectively reduce building energy consumption.It is fire-retardant,eco-friendlyand easy to apply.It can be coated on various walls to meet both thermal insulation and fire protection requirements,complying with energy-saving standards for public buildings.

Application Scenarios:Suitable for internal and external thermal insulation construction of exterior walls of residencesand apartments.Itcanalso be used for roof thermal insulation to reduce temperature transfer between indoorand outdoorareasand improve living comfort.

MainIngredients:Calciumcarbonate >=slant 8 5 %

[R&D, Inspection Basis& Implementation Standards]

GB/T25181-2019 Ready-mixed Mortar,Grade M5
GB 8624-2012 Classification for Burning Behavior of Building Materials and Products, Class A (A1)
GB 6566-2010 Limits of Radionuclides in Building Materials
CECS 1046-2022 Technical Specification for Energy-saving Wall System of Reflective Thermal
Insulation Coating Composite Thermal Insulation Mastic

[KeyParameters]

Water retention: 99.8%;14-day tensile bond strength: 0.76 MPa;28-day compressive strength: 9.9 MPa;
28-day shrinkage rate: 0.13%;Freeze-thaw strength loss:13%,mass loss: 2%;
Radioactivity: 0.11 IRa, 0.3 Ir;Thermal conductivity: 0.0511 W/(m·K).

[Instructions for Use]

Store ina dry indoor environmentto prevent moisture exposure.

Beforeapplication,ensure the substratesurface is clean,level,free of oil,and freeof loose particles.Damp substrates are acceptable,but surfaces with standing water are not suitable for application.

The wall substrate should be solid and free of hollowing,with flatness meeting specification requirements.

Before use,the wall does not require pre-wetting,and no curing is required after application. Waterratio:(A:B:water = 3 : 1 : 1 ⟩ .Depending onambient temperature,a10-15%variation in watercontent ispermissible.

Mixing sequence:Add water according to the ratio $$ add Component $\mathsf { B } \to$ mixthoroughly $$ add ComponentA mixthoroughly.

After mixing,allow the material to rest (for full reaction): mix for 3 minutes rest for 2minutes→ mixagain for1minute.

After mixing,the material should be used within 120 minutes.Do not add water again during application.

Forwall applications,a single coat should not exceed 2 0 \mathsf {mm } .After12-24 hours (fully dried),a second coat can be applied.For floor applications,a single layer should not exceed 6 0 {mm } ,and subsequent work can proceed after 48-60 hours of drying.(The drying time depends on the actualapplication thicknessand site conditions; greater thickness requires longer drying time.)

[ConsumptionReference]

Thickness:approximately10-15mm;consumption:approximately 8 { - } 1 2 . 7 5 {kg } / { m } ^ { 2 } Onesetofmaterial (ComponentA 2 5 + Component 8 8 . 5 = 3 3 . 5 \mathsf {kg } . cancoverapproximately2.6- 4 m ^ { 2 }

145# Wall & Floor Tile Specialty Mortar

C2Grade Performance/No Back Glue Needed/Super Adhesion Waterproof&Anti-Efflorescence Anti-Hollowing&Anti-Cracking High Stability & Non-Sagging

①Cementmortarbase layer
②Tile adhesive
③Backadhesive
④Tiles

[Product Information]

Product Name: Kunde145# Marble Mineral Fire-Resistant&Anti-Seepage TwoComponentWall&FloorTile SpecialtyMortar
Specification: Bagged two-component system;Component A 2 5 \mathsf {kg } + Component B 8 . 5 \mathsf {kg } = 3 3 . 5 \mathsf {kg } , set
Product Description:A C2-grade high-performance ceramic tile adhesive,suitable for bonding walltiles,facing tiles,and floor tiles.It does not require differentiation based on tile water absorption or size,and no back adhesive is required.The bonding strength is 2-3 times higher than conventional market-standard (C1) tileadhesives. Applications: Suitable for applications requiring high bonding strength and durability, suchas large-format tile installation,low water absorption tiles or high-load areas, renovation and refurbishment of existing wals,and high-humidity or long-term durability scenarios (e.g.,bathrooms,kitchens).
Main Composition:Calcium carbonate >=slant 8 5 % （20

[R&D,Testing Basis orApplicable Standards]

JC/T 547-2017 Ceramic Tile Adhesive,C2Type
GB/T25181-2019 Pre-mixedMortar,M5
GB 8624-2012 Classification for Burning Behavior of Building Materials and Products,
Class A (A1)
GB6566-2010 Limits of Radionuclides in Building Materials
JC/T984-2011Polymer Cement Waterproof Mortar,Type l

[KeyParameters]

Tensile bond strength:1.4 MPa;Tensile bond strength after water immersion:1.3 MPa;Tensile bond strength after heat aging:1.3 MPa;Tensile bond strength after freeze-thaw cycles:1.0 MPa;Open time: >=slant 2 0 min, tensile bond strength:1.4 Mpa

[lnstructions for Use]

Storeinadryplacetopreventmoistureexposure

Applications:Suitable for interior and exterior walls,water tanks,kitchens and bathrooms,basements,and similarareas.Applicable for bonding ceramic wall and floor tilesas wellas ceramic mosaics (for vitrified tiles and large-format tiles,an adhesion promoter is recommended).Water ratio:(A:B:water = 3 : 1 : 0 . 8 ).Depending onambient temperature,a 1 0 { - } 1 5 % variation in water content is permissible.

Mixing sequence:Add water according to the ratio $$ add Component $\mathsf { B } \to$ mix thoroughly $$ add Component \mathsf { A } \to mix thoroughly.

Aftermixing,allow thematerial to rest (for full reaction):mix for3 minutes $$ restfor2 minutes $$ mixagainfor1minute.

No pre-wetting of tiles is required beforeapplication.

Useanotched trowel to comb theadhesive into ridges on the substrate( 5 \mathsf {mm } or10 mm notch depending on requirements), then press the tiles into place within 5-15 minutes (depending on weather conditions; recommended application temperature: 5- 4 0 ^ { \circ } { C } ) ：

During tile installation on the substrate,the ridges on the tileadhesive and the wall surface should be keptaligned in the same direction.Afteralignment,ensure full coverage of mortar on the back of the tile.

After bonding,adjustments must be completed within 5-15 minutes.Usea rubber malletto tap the tile evenly from the center outward,expelling excess air from the Wall &Floor Tile Specialty Mortar (a mechanical vibrator is recommended) to prevent hollowing.

For non-fully vitrified tiles: move the tile slightly leftand right during installation,and tap evenlywitha rubbermallet.Leave a 2 { \mathsf {mm } } joint gap between tiles,and use a tile leveling system to ensure proper alignment.

For large-format tiles ( >=slant 6 0 x 1 2 0 {cm } ):before installation,checkand remove release agents,du or other residues on theback of the tiles.Useacuttingmachine to groove thetile,insertstainlesssteelanchors/connectors,apply jointsealant,and installthe tile. Thentap evenly from the centeroutward and tighten using a leveling system.

After mixing,the material should be used within 120 minutes.Do not add water again duringapplication.

[ConsumptionReference]

Thickness:approx.3-6 mm，consumption: 4.35-8.7kg/m²
One set(A 25 + B8.5=33.5kg) covers approx.3.8-7.7 m²

[Product Information]

Product Name:Kunde 145# Marble Mineral Fire-Resistant&Anti-Seepage TwoComponentPearl White
Specification:Packed in two components,Material A 1 2 . 5 \mathsf {kg } ^ + Material B 1 2 . 5 \mathsf {kg } = 25kg/set

Product Description:145# Pearl White is used to replace putty for leveling and whitening after mortar layers.It solves issues of traditional putty such as poor water resistance, efflorescence,and loose peeling.Features high hardness,waterproofing,moistureproofing,mildew resistance,and thermal insulation.It can be polished directlyasa finish layer.

Application Scenarios:Replaces putty layer ^ + waterproof layer,applied over thin plaster mortar layers.Superior to traditional materials like waterproof putty,shell powder, or gypsum.Suitable for both indoor and outdoor use,especially for exterior walls,project corridors,and public parkingareas.

Main Component:Calciumcarbonate >=slant 8 5 %

[R&D,TestingBasisorApplicableStandards]

GB/T25181-2019Pre-mixed Mortar
GB/T 55030-2022 General Code for Waterproofing of Building and Municipal Engineering
JC/T984-2011PolymerCementWaterproofMortar
JGJ/T70-2009 Standard for Test Methods of Basic Properties of Building Mortar
GB 6566-2010 Limits of Radionuclides in Building Materials
GB8624-2012 Classification for Burning Behavior of Building Materials and Products,
Class A (A1)
JG/T26-2002 Inorganic Exterior Wall Coatings
GB18582-2020-Benzene,Toluene,Ethylbenzene,and Xylene (total content): Not
detected
GB18582-2020-Volatile Organic Compounds (VOC):Not detected
GB18582-2020-Formaldehyde content:Notdetected
GB18582-2020-Total Lead (Pb):Notdetected
GB18582-2020-Soluble heavy metals:Notdetected

[KeyParameters]

Solid content:100%; Tensile strength: 1 . 5 \mathsf { M P a } ；Bond strength:0.75 MPa;Surface drying time: < 2 hours;Application performance:two coats can be applied smoothlywithout obstruction; Scrub resistance: > 6 0 0 0 cycles.

Water retention: 9 9 . 8 % 28-day compressive strength:9.9 MPa;28-day shrinkage rate: 0.13%; Radioactivity:0.11 IRa, 0 . 3 1 \mathsf { r } ; Impermeability pressure (7-day mortar specimen):1.1 MPa; Bond strength (7 days):1.2 MPa; Freeze-thaw resistance:no cracking or spalling; Waterabsorption:3.i%;Thermal storage stability(30 days):no caking,agglomeration,or separation;Water resistance (168 h): no abnormalities;Alkali resistance (168 h): no abnormalities.

[lnstructions for Use]

oreinadry indoorenvironmentto preventmoisture exposure.

Beforeapplication,ensure thesubstratesurface isclean,level,freeofoil,and freeof loose particles.The wallsubstrate should be solid and free of hollowing,with flatness meeting specificationrequirements.

isnotrecommended to apply directly onto insulation bricks.

Waterratio:(A:B:water = 1 : 1 : 0 . 9 ) .Depending onambient temperature,a10-15% variationinwatercontentispermissible

Mixing sequence:Add water according to the ratio $$ add Component $\mathsf { B } \to$ mix thoroughly $$ add Component \mathsf { A } \to mix thoroughly.

Aftermixing,allow the material to rest (for fullreaction): mix for3 minutes $$ rest for 2 minutes $$ mixagainfor1minute.

After the first coat is fully dry(approximately7 hours),the second coat can be applied After mixing,the material should be used within 90 minutes.Do not add water again during application.

For two-coat application,the total thickness is recommended not to exceed 2 { \mathsf {mm } } ,with an optimal thickness of 1 { - } 1 . 4 ~ \mathsf {mm } #

The optimal sanding time is 24-48 hoursafterapplicatior

[ConsumptionReference]

Application by trowel (1 coat): approximately 0.8-1kg/m²; Spray texture (1 coat): approximately0.6-0.8kg/m²
Onesetofmaterial(ComponentA 1 2 . 5 + ComponentB 1 2 . 5 = 2 5 {kg } cancover approximately12.5-15.5m²(twotrowelcoats)
Onesetofmaterial(ComponentA ^ { 1 2 . 5 + } ComponentB 1 2 . 5 = 2 5 {kg } cancover approximately 9-11.5 m²(two trowel coats ^ + spray texture finish).

145# #Moonlight White ForDecoration Use Onl

Waterproof&seepage-resistant/Moisture-proof&stain-resistant Alkali-resistant&mildew-resistantHigh hardness/Integrated base&surface Suitableforindoor and outdoor useArtistic texture/Eliminates putty and Icl

[Product Information]

Name: Kunde 145# Marble Mineral Fireproof & Impermeable Two-Component Moonlight White Specification: Bagged two-component system, Component A 1 0 \mathsf {kg } + Component B 1 0 \mathsf {kg } = 2 0 \mathsf {kg } perset Product Description:145# Moonlight White isapplied over the mortar layer to replace putty for leveling and white finishing.It resolves common issues of traditional putty such as poor water resistance,alkali efflorescence,looseningandflaking.ltfeatures high hardness,waterproofing,moisture-proofing,mildew resistance,energy-saving and thermalinsulation properties,providing an excellentbase forsubsequent topcoating orartisticfinishes.Meanwhile,Moonlight Whitecanalsobeused directlyasa finish materialto create embossed,sprayed or pressed artistic efects,realizing the integration of intermediate coating and finishing.

Application Scenarios:Replaces putty layer and waterproof layer (under normal conditions) Superior to traditional materials such as water-resistant putty,shell powderand base paste. Main Ingredients:Calcium carbonate >=slant 8 5 % （20

[R&D,TestingBasisorApplicableStandards]

JG/T 26-2002 Inorganic Exterior Wall Coatings
GB/T25181-2019 Pre-mixed Mortar
GB/T 55030-2022 General Code for Waterproofing of Building and Municipal Engineering
JC/T984-2011 Polymer Cement Waterproof Mortar
JGJ/T70-2009 Standard forTest Methods of Basic Properties of Building Mortar
GB 6566-2010 Limits of Radionuclides in Building Materials
GB8624-2012 Classification for Burning Behavior of Building Materials and Products, Class A (A1)
GB18582-2020-Benzene,Toluene, Ethylbenzene,and Xylene (total content): Notdetected
GB18582-2020-Volatile Organic Compounds (VOC): Not detected
GB18582-2020-Formaldehydecontent:Notdetected
GB18582-2020-Total Lead (Pb):Not detected
GB18582-2020-Soluble heavy metals:Not detected

[KeyParameters]

Solid content:10O%;Tensile strength:1.5MPa; Bond strength: 0.75 MPa; Surface drying time: < 2 hours; Application performance:two coats can be appliedWater retention:99.8%;28-day compressive strength: 9.9 MPa;28-day shrinkage rate:0.13%; Radioactivity:0.11lRa,0.3l;Impermeabity pressure (7-day mortar specimen):1.1 MPa; Bond strength (7 days):1.2 MPa; Freeze-thaw resistance: no cracking or spalling; Water absorption: 3.1%;Thermal storage stability (30 days):no caking,agglomeration,or separation; Water resistance (168 h): no abnormalities; Alkali resistance (168 h): no abnormalities.

MoonlightWhite

[Instructions for Use]

Store in a dry indoor environment to prevent moisture exposure.
Beforeapplication,ensurethesubstratesurface isclean,level,freeofoil,andfreeoflooseparticles. Thewall substrate should be solid and freeof hollowing,with flatness meeting specification requirements It is not recommended to apply directly onto bare bricks.
Waterratio:(A:B:water { \bf \tau } = 1 : 1 : 0.9).Depending onambient temperature,a10-15% variation in water content is permissible.
Mixing sequence: Add water according to the ratio →add Component B→mix thoroughly→add ComponentA mix thoroughly.
After mixing,allow the material to rest (for full reaction): mixfor 3 minutes→rest for2 minutes→mix againfor1minute.
After the first coat is fully dry(approximately7 hours),the second coat can be applied.
After mixing,the material should be used within 90 minutes.Do notadd wateragainduring application. For two-coat application,the total thickness is recommended not to exceed 2 \mathsf {mm } with an optimal thickness of 1 { - } 1 . 4 \mathsf {mm }
The optimal sanding time is 24-48 hoursafter application.

MoonlightWhite+LiquidInorganic Coating(ackret), Dual-ColorTextureEffect

[ConsumptionReference]

Applicationby trowel (1coat):approximately 0.8-1kg/m²;Spray texture (1coat):approximately 0.6-0.8 kg/m²
Onesetofmaterial (ComponentA10 ^ + ComponentB10 \ c = 20kg) cancoverapproximately10-12.5 m² (two trowel coats).
Onesetof material(Component A10 ^ + Component B10 \ c = 20kg) can cover approximately 7-9 m²(two trowelcoats ^ + spraytexturefinish).

4 Key Advantages

Unified145#DNA: Fire-resistant&anti-seepage,resistant to hollowing and cracking,mold-proof,
moisture-resistant,andhighhardness
Simplified Process: Directapplicationonbare bricks;plastering,leveling,whitening,anddecorative
finishingcompletedinonestep
CostEfficiency: One coat +sanding issuficientfordelivery,significantly reducing material and
laborcosts
EnhancedWallPerformance: Formsa protective“armor"layer,compatible withvarious decorative
coatings

Flagship New Product Revolutionary Technology

Integrated Base-to-Finish System (Applicable Directly on Bare Brick Walls) One Material= Plaster Leveling+ Intermediate Whitening Coat+ Decorative Finish

Applications

Exteriorwalls,boundarywalls Basements,parkingareas Renovationof residential housesand industrialbuildings Baseandintermediatelayersforhigh-endartisticwallfinishes

Publiccorridors,stairwells Interiorbasicfinishingdelivery

[Product Information]

ProductName:Kunde145#MarbleMineralFire-Resistant&Anti-SeepageTwo-ComponentMoonlightWhiteProt
Specification:Bagged two-componentsystem;ComponentA15kg+ComponentB5kg=20kg/set
ProductDescription:145#MoonlightWhitePro+canbeaplieddirectlyonbarebrickorcementplastersubstratesforplasteleveling interdiatedcoatieturi.Uiadiioalutiteproessitatelsooig enablesone-sttfllodmpleanofitroetivitrtizt WhitePro+aeateurauddterpesao thealsulahllll Applicatiostfsl residentialhousesandfactories,interiorbasicfinishing,andbase/intermediatelayersforhigh-enddecorativewals.
MainComposition:Calciumcarbonate≥85%

[R&D,TestingBasisorApplicableStandards]

JG/T26-2002InorganicExteriorWallCoatings
GB/T25181-2019Pre-mixedMortar
GB/T55030-2022General CodeforWaterproofing of Building
andMunicipal Engineering
JC/T984-2011PolymerCementWaterproof Mortar
JGJ/T70-2009StandardforTestMethodsofBasicPropertiesof
BuildingMortar
GB6566-2010 Limitsof Radionuclidesin BuildingMaterials
GB8624-2012Classification for Burning Behaviorof Building
MaterialsandProducts,ClassA(A1)
GB18582-2020-Benzene,Toluene,Ethylbenzene,andXylene
(totalcontent):Notdetected
GB18582-2020-Volatile Organic Compounds(VOC):Not
detected
GB18582-2020-Formaldehyde content:Not detected
GB18582-2020-TotalLead(Pb):Notdetected
GB18582-2020-Soluble heavymetals:Notdetected

[KeyParameters]

Solidcontent:100%;
Tensilestrength:1.5MPa;
Bondstrength:0.75MPa;
Surfacedryingtime:<2hours;
Application performance: two coatscanbe applied smoothly without obstruction;
Scrubresistance:>6oo0 cycles;
Waterretention:99.8%;
28-day compressive strength:9.9 MPa;
28-day shrinkage rate:0.13%;
Radioactivity:0.11I(Ra),0.3lr;
Impermeabilitypressure (7-daymortarspecimen):1.1MPa;
Bond strength (7 days):1.2MPa;
Freeze-thaw resistance: no cracking or spalling;
Waterabsorption:3.1%;
Thermal storagestability(30days):nocaking,agglomeration,o efflorescencephenomena;
Waterresistance(168h):noabnormalities;
Alkali resistance (168h):noabnormalities.

[lnstructions for Use]

Storeinadryindoorenvironmenttopreventmoistureexposure. Beforeapplication,ensurethesubstratesurfaceisclean,level,freeof oil,and freeof looseparticles.Dampsubstratesareacceptable,but surfaceswithstandingwaterarenotsuitableforapplication.
Thewall substrateshouldbesolidand freeof hollowing,withflatness meetingspecificationrequirements.
Before use,the wall does not require pre-wetting,and no curing is requiredafterapplication.
Waterratio:(A:B:water=3:1:0.9).Dependingonambient
temperature,a10-15%variationinwatercontentispermissible. Mixing sequence:Add wateraccording to the ratio→add
ComponentB→mixthoroughly→add ComponentA→mix
thoroughly.Aftermixing,allowthematerial torest (forfull reaction): mix for3minutes→restfor2minutes→mixagain for1minute. After mixing,the material should be used within120 minutes.Do not add wateragain during application.
Forwall applications,a single coat should not exceed8 mm.After6- 12 hours (fully dried),a second coat can be applied.The total
thicknessoftwocoatsshouldnotexceed15mm.(Thedryingtime dependsontheactualapplicationthicknessand siteconditions; greaterthicknessrequireslongerdrying time.)

[ConsumptionReference]

Thickness:approximately3- 5mm;consumption:approximately4.35- 7.25kg/m²;Decorativetexture:approximately1.5kg/m²

One setof material (ComponentA15+ ComponentB5=20kg)c·an coverapproximately2.8-4.6 m²(one trowel coat) Onesetof material (Component A15+ComponentB5=20kg)can coverapproximately2.2-3.4m²(one trowelcoat+decorative texture)

MasonryMortar

[Product Information]

Product Name: Kunde145# Marble Mineral Fire-Resistant&Anti-Seepage TwoComponent Surface Texture (Leather Finish)
Specification: Bucket packaging,5L(approx. 2 . 5 \mathsf {kg } ^ { * }

Product Description:The Taormina Luxury Leather Finish Series (Soft-touch Finish)is anartistic coating designed to createa leather-like visual and tactile effect,offering a highlyrealisticand distinctive feel.Applied over the MoonlightWhite base layer, it delivers natural textures and a soft, refined touch.During application,the leatherfinish material must be used in combination with a liquid inorganic coating.

Applications:Servesasanalternative to conventional decorative coatings, outperforming typical market products suchas latexpaint,texture coatings,and standardartisticcoatings.

Main Composition:Approximately 8 0 % inorganicminerals, >= 2 0 % organic protein ether

Color:The base leather-finish material is white.When combined with liquid inorganic poatings,the series offers 48 colors in total,including 32Monet-inspired shades and 16 Da Vinci-inspired shades.

[R&D,TestingBasisorApplicableStandards]

GB/T 23445-2009 Polymer Cement Waterproof Coating,Type I GB18582-2020 Limit of Harmful Substances in Interior Wall Coatings for Indoor Decoration MaterialsGB 6566-2010 Limits of Radionuclides in Building Materials

[Key Parameters]

Impact resistance: 1 0 \mathsf {cm } Water resistance (5oo h):no discoloration or loss of gloss. and no defects such as blistering,rusting,cracking,or peeling;Alkali resistance ( 5 % NaOH,1oo0 h): no discoloration or loss of gloss,and no defects such as blistering, rusting,cracking,or peeling;Humidity and heat resistance (5oo h):no blistering, rusting,cracking,or peeling;

'Artificial weathering resistance (3oo h): no blistering,rusting,cracking,or peeling

[Instructions for Use]

Store in a dry and cool place.
Applyontop of theMoonlightWhitebase layer.

The mixing ratio of the leather-finish material to liquid inorganic coating is 7:3 (by weight),andnoadditional water is required.

IThe leather-finish material must not be used alone.For white finishes,it must be mixedwith the liquid inorganic coating (Elegant White).

For color customization (Monet32-color palette),firstadjust the color of the liquid inorganic coating according to the specified code,then mix with the leather-finish material.

The mixed material is recommended to be used within the same day.If not fully used, it must be sealed and stored airtight to avoid contact with air.When reusing,remove any hardened material from the container edges to prevent affecting the application surface.

Apply the material evenly usinga texture roller,thenusea pattern roller to create the desiredtexture.Selecttoolsbasedonthe intendedtextureeffect.

Payattention to the working time for texturing.Using a curing accelerator(optional) pn the MoonlightWhite base layer can extend the working time.After the first coat is dry(approximately6 hours),asecond coatcanbeapplied.

It is recommended that two workers cooperate duringapplication forbetter results.

[UsageReference]

Apply2coatswithaconsumptionrateofapprox. 0 . 3 { - } 0 . 3 5 {kg / m } ^ { 2 } (mixedmaterial). Oneset ( 2 . 5 \kg skin-feel finish + \approx 1 \mathsf {kg } liquid inorganiccoating = 3 . 5 \mathsf {kg } total) covers approx. 1 0 { - } 1 2 m ^ { 2 } with2 roller coats.

(Soft-touch Finish)

Taormina Luxury Leather Finish Series

SubtleLuxury/Skin-LikeFeel/DelicateTouch Bamboo-Derived Ingredients/Naturally Antibacterial& Anti-Mite Soft& Impact-Resistant/GentleProtectionforBabies

ExceptionalTouchUnforgettableatFirstContact

Createsavarietyofleather-liketextures
Withamoist,skin-likesmoothtouch
Enhancesasafeandwarmspatial
atmosphere
Subtleoverall,yetrevealinghidden
luxuriousdetails

NoiseReduction&Sound Insulation

Thematerial canabsorbpartof thesound energywhilereducingsurfacesound reflection,effectivelyminimizingindoor echoandnoise.Italsoreducesthe transmissionofsoundfromthesourceto adjacentspaces,helpingtoprotect privacy,reduceinterference,andprovide sound insulation.

Strong Coverage & High Flexibility

Resistanttosubstrate cracking and canbedirectlyappliedandadheredto glasssurfaces.
Effectivelycoversunderlyingwall
colorsaswellastrowelmarksand
surfacestains.

145 # Pacific Golden Stone Series

[Product Information]

Product Name: Kunde145# Marble Mineral Fire-Resistant&Anti-Seepage Two-Component Han White Stone/Yellow Dragon Stone
Specification: Bucket packaging 5 \kappa θ (including Component A3.75 kg and Component B1.25kg) Product Description: Han White Stone/Yelow Dragon Stone isan artistic coating designed to create natural stone-like textures with a pronounced granular finish.Itcan be applied on cement mortar, Moonlight White { \mathsf { P r o } } + orthin-coat plaster layers without the need for additional putty leveling, achieving an integrated levelingand finishing system.It features high hardness,wearresistance, waterproofing,moisture resistance,mold resistance,and excellent tactile feel.
Applications: Used asa substitute for decorative coatings and waterproof layers (in non-special conditions),outperforming common market products such as texture coatings,stone-effect paints,and real stone coatings.

MainComposition:Calciumcarbonate >=slant 85%

[R&D,TestingBasisorApplicableStandards]

GB/T25181-2019Pre-mixedMortar
GB/T 55030-2022 General Code for Waterproofing of Building and Municipal Engineering
JC/T984-2011Polymer Cement Waterproof Mortar
JGJ/T70-2009 Standard for TestMethods of Basic Properties of Building Mortar
GB 6566-2010 Limits of Radionuclides in Building Materials
GB8624-2012 Classification for Burning Behavior of Building Materials and Products, Class A (A1)
JG/T 26-2002 Inorganic Exterior Wall Coatings
GB18582-2020-Benzene,Toluene, Ethylbenzene,and Xylene (total content): Not detected
GB18582-2020-Volatile Organic Compounds (VOC): Not detected
GB18582-2020-Formaldehydecontent:Notdetected
GB18582-2020-Total Lead (Pb):Not detectedGB18582-2020-Soluble heavy metals: Notdetectec

[KeyParameters]

Solid content:10o%;Tensile strength:1.5 MPa;Bond strength: 0.75 MPa;Surface drying time: < 2 hours;Application performance:two coatscan beapplied smoothly without obstruction;Scrub resistance: > 6000 cyclesSolid content:100%;Tensile strength:1.5 MPa;Bond strength: 0.75 MPa;Surface drying time: < 2 hours;Application performance: two coats can be applied smoothly without obstruction;Scrub resistance: > 6000 cycles

[Instructions for Use]

Store ina dry indoor environment to preventmoisture exposure

Before application,ensure thesubstratesurface isclean,level,free of oil,and free of loose particles. The wall substrate should be solid and free of hollowing,with flatness meeting specification
requirements.
Waterratio:(A:B:water \ c = 3:1:0.9).Depending onambient temperature,a 10-15%variation in water content is permissible.
Mixing sequence:Add water according to the ratio $$ add Component B→mix thoroughly $$ add Component A→mix thoroughly.
After mixing,allow the material to rest (for fullreaction): mix for 3minutes→rest for 2minutes→mix again for1minute.
After mixing,the material should be used within 90 minutes.Do notadd water again during application. Application tools:Trowel,scraper,plastic float,and other texturing tools (dependingon thedesired texture, different tools should be used).
First coat: Under normal temperature conditions, drying time isapproximately7 hours.
Second coat:Applywith a thickness of approximately 1 { \mathsf {mm } } Texture shaping should be carried out immediatelyafterapplication.
Controlthe working time for texturing.Between the first and second coats,a curing accelerator(optional) can be used to extend the working time.
When theapplicationarea exceeds 5 { \mathsf { m } } ^ { 2 } ,texturing should be performed under suitable temperature and humidity conditions.It is recommended thattwo operators work together:one creates the texture usinga plastic float,while the other smoothsand refines the surface.
Note:Under differenttemperatureand humidityconditions,drying behaviormayvary.Operators shouldbecome familiarwiththematerialproperties inadvancetoproperlycontrolthe texturing time.

[ConsumptionReference]

Application by trowel(1coat): approximately1-1.4kg/m²;Texturing (1coat):approximately1.2-1.4 kg/m²
Onesetofmaterial(ComponentA3.75 ^ + ComponentB 1 . 2 5 = 5 kg)cancoverapproximately1.8-2.2 m²(trowel application ^ + texturing).

Natural& Comfortable Visual Effect/ Reduced Process Steps Anti-Seepage & Stain-ResistantHigh Color Retention Suitable for Indoor& Outdoor Use

88988888

[Product Information]

Product Name: Kunde145# Marble Mineral Fire-Resistant&Anti-Seepage Inorganic Mineral Mortar

Specification: Bottle packaging 1 \kappa θ ：bucketpackaging 1 0 \mathsf {kg } / 2 0 \mathsf {kg }

Product Description: Liquid inorganic coating isan inorganic mineral-based coating that contains no organic solvents (Solvent-free).Compared with traditional organic coatings,it offers superior weather resistance,chemical resistance,and stain resistance,aswellas better adhesion and coverage.

Applications: Applied as a color decorative coating on leveled wallsurfaces.Suitable for use over thin-coat plaster mortar,inorganic mineral mortar,and MoonlightWhite base layers. Suitable forboth indoorand outdoor use.When used in combination with leather-finish materials,itcancreateTaorminaLuxuryLeatherFinishSerieseffects. Main Composition: Inorganicminerals >=slant 9 9 %

[R&D,TestingBasisorApplicableStandards]

GB/T23445-2009 Polymer Cement Waterproof Coating,Type l
GB18582-2020 Limit of Harmful Substances in Interior Wall Coatings for Indoor Decoration
Materials
GB 24408-2009 Limit of Harmful Substances in Exterior Wall Coatings for Construction
GB 8624-2012 Classification for Burning Behavior of Building Materials and Products, Class A
(A1)
GB 6566-2010 Limits of Radionuclides in Building Materials
JG/T26-2002 Inorganic Exterior Wall Coatings

[KeyParameters]

Impact resistance:10 cm;Water resistance (5o0 h):coating film shows no discoloration or loss of gloss,and no defects such as blistering,rusting,cracking,or peeling Alkali resistance (5% NaOH,1000 h): coating film shows no discoloration or loss of gloss,and no defects such as blistering,rusting,cracking,or peeling Humidityand heat resistance (5o0 h):no blistering, rusting,cracking,or peeling Artificial weathering resistance (3Oo h): no blistering, rusting, cracking, or peeling

[Instructions for Use]

Basic tools: Brushes (various sizes depending on area),rollrs,trays,scrapers,sandpaper (coarse and fine),masking tape,cloths, gloves,masks, etc.

Special tools: For large-area spraying,preparea spray gun and air compressor; for joints,fillers and caulking guns may be required.

Surface preparation: Clean dust,oil,rust,and other contaminants using a cloth or cleaner to ensurea clean surface.Sanding:Sand the surface to createauniform roughnessand improve adhesion (remove rust on metal surfaces before sanding).

Repair: Fillcracks and depressions with Moonlight White or filer;sand smooth after drying. Protection: Use masking tape and plastic film to protect edges of doors, windows,and hardware from contamination.

Brush application: Dip an appropriate amount of coating and apply evenly in one direction to avoid buildup or brush marks; lightly detail corners witha brush.

Roller application: Load the roler ina tray,remove excess coating,applyina“W"pattern,then level horizontallyand vertically foran even finish.

Spray application: Adjust spray pressure and nozzle size; maintain a distance of 30-50 cm from the surface; move evenly to avoid buildup.

Typicallyapply2-3 coats.After the first coat dries (usually2-4 hours),lightlysand with fine sandpaper,removedust,thenapplythenextcoat.

The direction of the final coat should be perpendicular to the previous one to ensure uniformity.

Afteropening,remain coatingmustbesealedandstoredinacool,dryplace Theoriginal base colorsare theDa Vinci1 ries,readytousewithout dilution. TheMonet32-colorseriesisformulatedfromtheDaVinci16colorsac lingtospecified ratios.Note: once mixed,itcanonlybe used with leather-finishmaterials for the luxury serie effectandcannotbeappliedasaflatcoating.

[ConsumptionReference]

Spray/Rollerapplication (1coat):approximately 0.08-0.13kg/m² Eachbottle(1kg)cancoverapproximately4-6m²(2coatsbysprayorroller)

[Product Information]

Product Name: Kunde 145# Marble Mineral Fire-Resistant&Anti-Seepage Two-Component Waterproof Repair Mortar

Specification: Bucket packaging,two-component system; Component A 8 \mathsf {kg } + Component B 2 \mathsf {kg } = 1 0 \mathsf {kg } / \mathsf { s e } t

Product Description:The waterproof repair mortar offers excelent waterproof performance, effectively preventing water penetration.It provides strong adhesion to thesubstrate, ensuring the repair layer remains firmly bonded and resistant to detachment.With high durability,it resistsaging over long-termuseand maintains long-lasting waterproof performance.It is also cost-effective, helping to reduce long-term maintenance costs. Applications: Suitable for solving leakage problems that cannot be addressed by traditional grouting methods.Can be applied on both positive and negative waterproofing surfaces and is capable of long-term water immersion.Also applicable for waterproofing walsand floors, repairing cracks,or addressing leakage and depressions in conventional mortar layers. Compatible with various substrates suchas concreteand masonry,making it ideal for complexscenarios includingwalls,basements,and water tanks.
Main Composition: Inorganic materials >=slant 9 9 % （204号

[R&D,TestingBasisorApplicableStandards]

GB/T25181-2019Pre-mixedMortar,M5
GB 8624-2012 Classification for Burning Behavior of Building Materials and Products, Class A
(A1)
GB 6566-2010 Limits of Radionuclides in Building Materials
GB/T 55030-2022 General Code for Waterproofing of Building and Municipal Engineering
JC/T984-2011 Polymer CementWaterproof Mortar
JGJ/T70-2009 Standard for TestMethods of Basic Properties of Building Mortar

[KeyParameters]

Water retention:99.8%;Impermeability pressure(7 days):1.1 MPa;28-day compressive strength: 9 . 9 M P a 28-day shrinkage rate:0.13%;Bond strength (7 days):1.2 MPa;Freeze-thaw resistance: no cracking orspalling;Waterabsorption:3.1%;Radioactivity: 0.11 IRa,0.3 Ir.

[Instructions for Use]

The surface must be flat,clean,free of oil,dust,and release agents,otherwise adhesion will be affected.

Work type: It is recommended to use putty or waterproofing professionals for application. Step1:Dilute the curing accelerator with 5 0 % water,and spray evenly onto the substrate twice without pressure.After drying,the waterproof repair mortar can beapplied.

Step 2:Mixing ratio for waterproof repair mortar: Component A (powder):Component B (liquid):water = 4 : 1 :1.3-1.5.(Depending on weather and temperature,water content may beadjusted within ± 1 0 % .Applybytrowelwitha thicknessof 0 . 5 { - } 0 . 8 \mathsf {mm } per coat. The previous coat must be fullydry (approximately 4-6 hours) before applying the next.Thickness control:Avoid thickapplication;each coatshould not exceed 1 \mathsf {mm } (toprevent cracking). If the substrate has significant unevenness,first level with waterproof mortar,then apply the waterproof repairmortar.

Smoothing &finishing: After application,smooth the surface using an H-type scraper from bottom to top.Fillany depressions as needed and aim to level in one pass.Whether polishing is required depends on project requirements;it is recommended to polish at a semi-dry stage. Substrate condition: No standing water should be present during application.

Storage conditions: Store ina dry place to prevent moisture exposure.

[ConsumptionReference]

Applicationthickness(1coat):approximately 0 . 5 \mathsf {mm } ;consumption:approximately0.6-0.8 k _ { { g } / \mathsf { m } ^ { 2 } }
Onesetofmaterial(ComponentApowder8kg ^ + Component B liquid 2 \mathsf {kg } = 1 0 \mathsf {kg } can coverapproximately 1 2 . 5 { - } 1 7 { m } ^ { 2 } (two trowel coats).

WaterproofAccelerator

(PolymerWaterproofMortar-ComponentB)

Color/Specification

[Milky white][1/10/20 kg (bottle/bucket)

Applications

1.Purpose: Waterproofing

2.Suitable for substrates with high waterabsorption (various brick wals,lightly chalking substrates). Used forwaterproofing inareassuchasroofs,kitchens,bathrooms,balconies,andbasements. Provides anti-seepage performance and can be applied on both positive and negative waterproofing surfaces.

Instructions for Use

1.Substraterequirements:Beforeapplicationensurethesurfaceiscleanandfreeofdust,oilandother contaminants.
2.Mixingmethod:PolymerwaterproofmortarComponentB：water = 1 1：0.5-1.Mixthoroughlyuntil uniform.
3.Applicationmethod:Applyusinga brushorroller,oruseaspraydevice.
4.Coveragerate:Spray:O.05-0.08 kg / m ^ { 2 } Roller:0.1-0.12 kg / m ^ { 2 } Eachbottle ( 1 \kg ) covers
approximately 1 2 - 2 0 m ^ { 2 }
5.Workingtime:Useimmediatelyafteropening.Mixedmaterialshouldbesealedandstoredinacool place.Donotexceed48hoursof opentimetoavoidperformancedegradation.
6.Colorafterapplication: Transparent
7.Notes:Thematerial becomessurface-dryafter2-4 hours.Proceed withsubsequentconstruction promptlytoavoiddustadhesionaffecting quality.

CuringAccelerator

(Penetrating Mortar, Component B)

Color/Specification

Milky white 1/10/20kg(bottle/bucket)

Applications

1.Function:Strengthens the substrateand extends the working time for decorative texturing 2.Suitablefor dustyor slightly chalking substrates (e.g.,concrete wals,slabs).It consolidates the base layerto prepare forsubsequentconstruction.Itcanalso be used asan intermediate interface treatment before creatingartistic textures in the Golden Stoneand Luxury Leather series,reducing water absorption of the intermediate layer and extending the texturing time.

Instructions for Use

1.Substraterequirements:Ensurethesurfaceiscleanandfreeofdust,oilandothercontaminants beforeapplication.
2.Mixing method:Penetratingmortar ComponentB：water = 1 :0.5-1.Mix thoroughly before use. 3.Applicationmethod:Applywitha brushor roller,orusea spraydevice.
4.Coveragerate:Spray:0.05-0.08 kg / m ^ { 2 } , Roller: 0.1-0.12 k _ { { { g } } } / \mathsf { m } ^ { 2 } , Eachbottle ( 1 \kg ) covers
approximately12-20m².
5.Working time:Useimmediatelyafteropening.Mixedmaterial shouldbesealedandstoredinacool place.Do not exceed 48 hoursof open time toavoid performance degradation.
6.Colorafterapplication:Transparent
7.Drying time:Surface dry inapproximately2-4 hours,fullydryin24 hours.

Anti-StainAccelerator (Stain-ResistantMortar-ComponentB)

Color/Specification Milkywhite][1/10/20kg(bottle/bucket)

Applications

1.Function: Anti-stain and hardness enhancement
2.Usedasaprotective topcoat for textured artistic wallfinishes,improvingstainresistance,wear resistance,and gloss performance.

InstructionsforUse

1.Substraterequirements:Ensurethesurfaceiscleanandfreeofdust,oil,andothercontaminants beforeapplication.
2.Mixingmethod:Stain-resistantmortarComponentB：water = 1 ：0.5-1.Mixthoroughlybefore use.
3.Applicationmethod:Applyusinga brush or roller,orusea spray device.
4.Coveragerate:Spray:0.05-0.08 k _ { { g } } / m ^ { 2 } Roller:0.1-0.12 \mathsf {kg / m } ^ { 2 } Eachbottle ( 1 \kg ) covers approximately 1 2 - 2 0 m ^ { 2 }
5.Working time:Useimmediatelyafteropening.Mixedmaterial shouldbesealedandstored ina cool place.Do not exceed 48 hoursof open timetoavoid performance degradation.
6.Colorafterapplication:Transparent
7.Notes:Thematerial becomessurface-dryafter2hours.Proceed withsubsequentconstruction promptlytoavoiddustadhesionaffectingquality.

AdhesionPromoter AdhesionPromoter (High-PenetrationMortar-ComponentB)

Color/Specification

Milkywhite][1/10/20 kg (bottle/bucket)

Applications

1.Function: Enhances adhesion
2.Suitable for smooth,non-absorbent surfaces,including metals, waterproof membranes,and wood finishes (e.g., gas,tile walls,channel steel, wood,etc.).

Instructionsfor Use

1.Substraterequirements:Ensurethesurfaceiscleanandfreeofdust,oil,andothercontaminantsbefore application.
2.Mixingmethod:High-penetrationmortarComponentB：water \mathbf { \Psi } = \mathbf { \Psi } 1:0.2-0.5.Mixthoroughlybeforeuse 3.Applicationmethod:Applyusinga brush or roller,orusea spraydevice.
4.Coverage rate:Spray: 0.1-0.12 \mathbf {kg } / \mathbf { m } ^ { 2 } , Roller:approximately 0 . 1 5 { - } 0 . 2 {kg } / { m } ^ { 2 } , Eachbottle ( 1 \kg ) covers approximately 5 - 1 0 m ^ { 2 }
5.Thematerialshouldbeusedimmediatelyafteropening.Mixedmaterialmustbesealedandstoredina coolplace.Donotexceed48hoursof opentime toavoidperformancedegradation.
6.Colorafterapplication:Transparent
7.Notes:
(1)Afterapplication,thematerialbecomessurface-dryin1hour.Proceedwithsubsequentconstruction promptlytoavoid dustadhesionaffecting quality.
(2) Use with caution onconcrete wallsor in environmentswith heavy dust.

S2Waterproof Joint Filling Adhesive

Color/Specification

Milkywhite]1/10/20kg (bottle/bucket)

Applications

1.Function: Flexible joint filling and waterproofing

2.Effectively prevents crackingatjoints between diferentpanels caused byhumidityortemperaturechanges. 3.Suitableforcalciumsilicateboards,gypsum boards,fibercementboards,plywood,andbuilding wal/floor applications.Suitable forfiling joints betweenmaterials with different waterabsorptionrates,including combinations of absorbent and non-absorbent materials.Applicable for joints >=slant 3 \mathsf {mm } with strong adhesion;also suitable for waterproofing applications.
4.Provides good elasticity,suitableforareassubjecttoslightmovement.Itresistscracking understress,offers good recovery,and isresistanttoaging.

Instructionsfor Use

1.Substraterequirements:Ensurethesurfaceiscleanandfreeofdust,oil,andothercontaminantsbefore application.
2.Mixing method: Readyto use; no mixing required.
3.Applicationmethod:
(1)WidencracksintoaV-shapeforbetterfillng;removedustandloosematerial，cleanwithadampcloth and allow to dry.
(2)Optional:Applyfiberglassmeshextendingatleast5cmbeyondbothendsofthecrackand5cmbeyond eachsidetofullycoverweakareas.
(3)UseascrapertoevenlyapplyS2waterproofjointfilingmortaroverthemeshensuringfullpenetration intothemeshandcompletefilingofthecrack.Extendcoverage2-3cmbeyondthemeshedges,withthe surface slightly higher thanthe substrate (toallowfor shrinkage).
(4)Afterdrying(approximately24hours),checkforshrinkagedepressons.If present,repairagainwithS2 mortar;ifraisedareasexist,sandsmoothandcoverwithMoonlightWhite.
4.Coveragerate:Dependson jointlengthand depth
5.Drying time:Approximately24 hours; proceedtothe nextstepafterdrying
6.Colorafterapplication:White
7.Notes:Suitableforjointsbetweenmaterialswithdifferentabsorptionrates;notsuitableforbonding two non-absorbentsurfaces.

Crack Repair Agent(crack Repair Mrtar-ComponetB)

Color/Specification

Brown][1/10/20 kg(bottle/bucket)

Applications

1.Function: Flexible joint filling and waterproofing
2.Effectively solves leakage caused by cracks in roofing waterproof membranes due to sun exposure, rain,and aging.Suitable forrepairing cracked waterproof membranesand minor cracks in floors and slabs.

[Instructions for Use]

(1)Locatecracks:ldentifytheexactlocationofcracksinthewaterproofmembrane (observe leakage pointsduring rainor performwater tests when dry).Mark thecrackarea (includingasurrounding 5- 10 cm zone).
(2)Remove debris: Useawire brush or sandpaper toclean thecrackand surroundingmembrane surface,removingustmossgedlayersandlooseprticles.Foroilcontamination,eanwith alcohol ora dedicated cleaner
(3)Drythesubstrate:Useablowerwithcoldairtodrymoistureinsidethecracks(critical:moisturewil causebonding failure).Ifwater isseeping fromthesubstrate (e.g.,cementmortarbeneaththe membrane),firstsealthe leakage point (e.g.,byinjecting cement-based crystalline waterproofing material).
2.Mixing method: Ready to use; no mixing required.
3.Applicationmethod:
(1) Fine cracks ( <= 3 \mathsf {mm } ) :Injectthe crackrepairmortar(ComponentB)along the crack tofullyfillit. Useascraperorglovedfingertopressthematerialintothecrack,withthesurfaceslightlyhigher thanthemembrane.After partial curing (approx.2-4hours),applyanother layerwithina5cmrange onbothsidesto forma reinforced sealingbandand improve crackresistance.
(2)Largercracks(3-10mm)orslightmembranedamage:Carefullcutopenthecrackedgesusinga (2)Largercracks ( 3 - 1 0 \mathsf {mm } ) orslightmembranedamage:Carefullycutopenthecrackedgesusinga utilityknife(avoidenlargingdamage),injecttherepairmortartofullyfilldeepareasandsmooththe surface.Applyalayeroffiberglassmeshover thecrack(atleast5cmwiderthanthecrack),thencoat itwithanother layerof repairmortar,fullycovering themeshandremovingairbubbles.
4.Coverage rate:Dependsoncrack lengthand depth
5.Drying time:Approximately24hours;proceedtothenextprocessafterdrying
6.Colorafterapplication: Transparent
7.Inspection:Allowtherepairedarea tofullycure (approx.24-48hours).Avoidfoottrafficorrain exposure during thisperiod (cover with plasticif necessary).Aftercuring,performawater test-pour waterontotherepairedareaand observefor24hours.Ifno leakageoccurs,therepair issuccessful. 8.Notes:
(1)Ifthewaterproofmembraneisseverelyaged(e.g.,britleorcrumbling),usingrepairmortaralone maynotbesufficient.Itisrecommendedtoremovethedamagedareaandreapplynewmembrane, sealing jointswithrepairmortar.
(2)Inrainyorsnowyconditions below5°C,drying time maybeafected.Workmore eficientlyand considerearlymorning oreveningapplication.
(3)Ifcracksarecausedbysubstratesettlement(e.g.,structuraldeformation),expansionjointsshould beaddedatthecorresponding substrate locationafterrepairto prevent recurrence.

给你内外不怕水的墙 HUADE TIMES一 KEEPYOURWALLSIMPERMEABLE

广东桦德时代新材料股份有限公司GUANGDONGHUADETIMESNEWMATERIALCO.,LTD

Service Hotline:400-6866-145

Headquartersddress:uiling1,No.10,Huanshindoad,jn District,JiangmenCity，Guangdong Province,hina

Production Base:DalianTangBase,Gong'anTown,ZhongshanCounty, GuangxiZhuangAutonomousRegion,China