该页无缩略图
该机采用立式装夹，产品旋转，枪头自由摆动各种角度来适合切割出各种产品；
设备免编程直接导入3D图纸自动生成加工路径；切割枪头可保持90°垂直加工，切
口光洁无毛刺；五轴联动多角度作业，可适合圆形、方形、椭圆形、及各类曲面
异形件加工；
整台设备采用高档外壳包装，提高端形象。
设备基本参数
加工范围 直径Ø600以内；切顶高 300内，切侧高 500内
运动行程 X轴450、Y轴500、Z轴350
激光功率 选配：1500W、2000W、3000W、6000W
总功率 约5kw(不含激光器）
外形尺寸 2500x1860x2100
设备重量 约1800kg
精密三维五轴激光切割机
产品特点：
This machine adopts a vertical clamping system, allowing the product to rotate and the
cutting head to swing freely at various angles to suit different cutting needs. The equipment
can directly import 3D drawings without programming and automatically generate machining
paths. The cutting head can maintain a 90° vertical machining angle, ensuring a smooth and
burr-free cut. With five-axis linkage and multi-angle operation, it is suitable for processing
round, square, oval, and various curved and irregular shapes;The entire equipment is
packaged in a high-end shell to enhance its image.
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
(Top cut height) (Cut side height)
(Excluding laser device)
Equipment weight
Basic parameters of equipment
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
Precision 3D five-axis laser cutting machine
该机采用立式装夹，产品旋转，枪头自由摆动各种角度来适合切割出各种产品；
设备免编程直接导入3D图纸自动生成加工路径；这是一台性价比最高，选择人群
最多的机型；五轴多角度切口光洁无毛刺，可适合圆形、方形、椭圆形及各类曲
面异形件加工。
（去除枪头旋转轴与更换四轴系统，秒变四轴激光切割机）
600型三维五轴激光切割机
产品特点：
This machine adopts a vertical clamping system, allowing the product to rotate and the gun
head to swing freely at various angles to suit cutting various products. The equipment can
directly import 3D drawings without programming and automatically generate machining
paths. It is a machine with the highest cost-effectiveness and the most popular choice among
users. With five-axis multi-angle cuts that are smooth and burr-free, it is suitable for
processing round, square, oval, and various curved and irregular shapes.(Remove the gun
head rotating shaft and replace it with a four-axis system, instantly transforming into a fouraxis laser cutting machine)编辑译文段落对照
设备基本参数
直径Ø600以内；切顶高 390内，切侧高 500内
X轴450、Y轴500、Z轴350
选配：1500W、2000W、3000W、6000W
约5kw(不含激光器）
2150x1780x2050
约1300kg
(Top cut height) (Cut side height)
(Excluding laser device)
加工范围
运动行程
激光功率
总功率
外形尺寸
设备重量
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
Equipment weight
600-type 3D five-axis laser cutting machine
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
该机采用立式装夹，产品旋转，枪头自由摆动各种角度来配合切割出各种产
品；设备免编程直接导入3D图纸自动生成加工路径；800、1000机型是在
600机型上扩大了加工范围与传动动力；在机床方面也大幅度做了加强加大。
五轴多角度切口光洁无毛刺，可适合更大圆形、方形、椭圆形及各类曲面异形
件加工。
800型\\1000型三维五轴激光切割机
产品特点： 设备基本参数
加工范围 直径Ø800/Ø1000以内；切顶高 390内，切侧高 500内
运动行程 X轴600/900、Y轴500、Z轴450/600
激光功率 选配：1500W、2000W、3000W、6000W
总功率 约5kw(不含激光器）
外形尺寸 2350x1880x2050/2900x2050x2050
设备重量 约1400kg/1600kg
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
(Top cut height) (Cut side height)
(Excluding laser device)
Equipment weight
Basic parameters of equipment
This machine adopts a vertical clamping system, allowing the product to rotate and the
gun head to swing freely at various angles to facilitate the cutting of various products.
The equipment can directly import 3D drawings and automatically generate machining
paths without programming. The 800 and 1000 models expand the processing range
and transmission power based on the 600 model. The machine tool has also been
significantly strengthened and enlarged. The five-axis multi-angle cut is smooth and
burr-free, suitable for processing larger circular, square, elliptical, and various curved
irregular parts.
800-type/1000-type three-dimensional five-axis laser cutting machine
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
该机针对大型产品而开发的一台五轴激光切割；设备选用大型立柱
支承、上下运动Y轴加厚钢结构超高行程；选用45导轨、整体加厚机
身；确保运行平稳，切割光洁无抖动。同样免编程直接导入3D图纸
自动生成加工路径；五轴联动多角度作业，适合各种大形工件和整
圆球各类曲面异形件切割。
1000大型三维五轴激光切割机
产品特点：
This machine is a five-axis laser cutting system developed specifically for large-scale
products. It features a large column support, an ultra-high travel range with thickened
steel structure for the up-and-down Y-axis movement, 45-degree guide rails, and an
overall thickened machine body, ensuring smooth operation and cutting without jitter.
It also supports direct import of 3D drawings for automatic generation of processing
paths without programming. With five-axis linkage and multi-angle operation, it is
suitable for various large-scale workpieces and cut with curved surfaces such as full
spheres and other irregular shapes.
设备基本参数
加工范围 直径Ø1000以内；切割高度（Cutting height ) 1000内
运动行程 X轴600、Y轴1200、Z轴650
激光功率 选配：1500W、2000W、3000W、6000W
总功率 约6.5kw(不含激光器）
外形尺寸 2900x2050x2900
设备重量 约2300kg
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
(Excluding laser device)
Equipment weight
Basic parameters of equipment
1000 large-scale 3D five-axis laser cutting machine
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
该机仍然采用立式装夹的优点；在工艺上改动将切割枪头设计在
产品上方运行，可以对产品进行免编程多角度的五轴切割加工；
五轴加工时可自由选择是否需要气缸压料；另外这台设备配有一
个平面切割工作台，可直接导入二维图纸进行平面切割；实现了
一机多用的功能，可更广泛的加工各种产品。
800小型龙门五轴激光切割机
产品特点： 设备基本参数
加工范围 直径Ø800以内；高度 400内，平面 900x600内
运动行程 X轴1000、Y轴750、Z轴550
激光功率 选配：1500W、2000W、3000W、6000W
总功率 约5.7kw(不含激光器）
外形尺寸 2300x2200x2600
设备重量 约1180kg
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
( height) (Plane)
(Excluding laser device)
Equipment weight
Basic parameters of equipment
This machine still retains the advantages of vertical clamping; in terms of process,
the cutting torch head is designed to operate above the product, enabling
programming-free multi-angle five-axis cutting and machining of the product.
During five-axis machining, the option to use or not use a cylinder for material
pressing is freely selectable. Additionally, this equipment is equipped with a flat
cutting workbench, which allows direct import of 2D drawings for flat cutting. It
achieves the function of multiple uses for one machine, enabling a wider range of
product processing.
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
800 small gantry five-axis laser cutting machine
该机采用立式装夹；针对大型产品加大了足够的加工范围为了加工更大的产
品，在机床上也加强了足够的结构刚性，让设备运行起来灵活又稳重；切割
枪头设计在X、Y龙门上运行可加工更大的产品保持统一的精度；更广泛的适
合各种回转体或异形曲面工件的精确切割。
1500大型龙门五轴激光切割机
产品特点：
This machine adopts a vertical clamping system; it has increased the processing range
sufficiently for large products. To process larger products, the machine tool has also been
strengthened with sufficient structural rigidity, making the equipment operate flexibly and
stably. The cutting torch head is designed to run on the X and Y gantry, allowing for the
processing of larger products while maintaining uniform precision. It is more widely suitable
for precise cutting of various rotational or irregularly shaped curved surface workpieces.
设备基本参数
加工范围 直径Ø1400以内；高度 450内，方形 800x800内
运动行程 X轴1500、Y轴820、Z轴550
激光功率 选配：1500W、2000W、3000W、6000W
总功率 约7kw(不含激光器）
外形尺寸 3000x2250x2980
设备重量 约2000kg
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
( height) (Square)
(Excluding laser device)
Equipment weight
Basic parameters of equipment
1500 large gantry five-axis laser cutting machine
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
该机是针对大型又重量级的产品开发的一款设备；机床整体加重加厚，
大重载型减速机，可带动约900kg的产品与夹具，采用简便立式装夹，
夹具制作简单，产品上下料方便；设备同样采用免编程多角度的五轴联
动切割系统；操作简单易学。适合各种重载型的回转体或异形曲面工件
的五轴联动切割。
1500大重载龙门五轴激光切割机
产品特点： 设备基本参数
加工范围 直径Ø1400以内；高度 450内，方形 800x800内
运动行程 X轴1500、Y轴820、Z轴550
激光功率 选配：1500W、2000W、3000W、6000W
总功率 约7kw(不含激光器）
外形尺寸 3000x2250x2980
设备重量 约2000kg
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
( height) (Square)
(Excluding laser device)
Equipment weight
Basic parameters of equipment
This machine is specifically developed for large and heavy-duty products. The overall
structure of the machine tool is reinforced and thickened, equipped with a heavy-duty
reducer capable of driving products and fixtures weighing approximately 900kg. It adopts a
simple vertical clamping method, with easy-to-make fixtures and convenient product
loading and unloading. The equipment also features a programming-free multi-angle fiveaxis linkage cutting system, making operation simple and easy to learn. It is suitable for
five-axis linkage cutting of various heavy-duty rotary or irregularly shaped curved surface
workpieces.
1500-ton heavy-duty gantry five-axis laser cutting machine
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
该机是针对需要大批量激光切割加工的产品而开发的五轴激光切割机；机床
设计两个工作台，可以达到一个工位在切割，另一个工位在装夹，将激光切
割机与操作人员最大利用化；系统支持两个工位操控方式，采用免编程多角
度的五轴联动切割系统；操作简单易学。适合各种中小工件回转体或异形曲
面工件的五轴联动切割。
双工位龙门五轴激光切割机
产品特点：
This machine is a five-axis laser cutting machine developed for products that require largescale laser cutting processing. The machine tool is designed with two workstations, allowing
one workstation to be in cutting while the other is in clamping, maximizing the utilization of
the laser cutting machine and operators. The system supports two-station control methods
and employs a programming-free multi-angle five-axis linkage cutting system. The
operation is simple and easy to learn. It is suitable for five-axis linkage cutting of various
small and medium-sized workpieces, such as rotational bodies or irregular curved surfaces.
设备基本参数
加工范围 直径Ø600以内；高度 400内，方形 400x400内
运动行程 X轴1500、Y轴950、Z轴550
激光功率 选配：1500W、2000W、3000W、6000W
总功率 约7kw(不含激光器）
外形尺寸 3000x2200x2900
设备重量 约1800kg
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
( height) (Square)
(Excluding laser device)
Equipment weight
Basic parameters of equipment
Dual-station gantry five-axis laser cutting machine
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
这台机器最大的特点就是不但产品直径做得大，产品高度也做得高；并且采
用上下双Y轴结构，可确保切割产品底部、中间、顶部精度达到统一；解决
了龙门或悬臂五轴不能切割高产品的短板，机器同样采用免编程多角度的五
轴联动切割系统；操作简单易学。适合各种大又高的回转体或异形曲面工件
的五轴联动切割。
单龙门大型五轴激光切割机
产品特点： 设备基本参数
加工范围 直径Ø1500以内；高度 900内，方形 1000x1000内
运动行程 X轴1100、Y轴1050、Z轴850
激光功率 选配：1500W、2000W、3000W、6000W
总功率 约7kw(不含激光器）
外形尺寸 2700x2400x2500
设备重量 约1850kg
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
( height) (Square)
(Excluding laser device)
Equipment weight
Basic parameters of equipment
The biggest feature of this machine is that it not only produces products with a large
diameter but also with a high height. It adopts an upper and lower dual Y-axis structure,
ensuring uniform precision in cutting the bottom, middle, and top of the product. This
solves the shortcoming of gantry or cantilever five-axis machines that cannot cut high
products. The machine also adopts a programming-free multi-angle five-axis linkage cutting
system. It is easy to operate and learn. It is suitable for five-axis linkage cutting of various
large and tall revolving or irregularly shaped curved surface workpieces.
Single-gantry large five-axis laser cutting machine
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
双摆轴五轴激光切割机
产品特点： 设备基本参数
加工范围 直径Ø800以内；高度 300内，方形 750x750内
运动行程 X轴1500、Y轴820、Z轴450
激光功率 选配：1500W、2000W、3000W、6000W
总功率 约5.5kw(不含激光器）
外形尺寸 3000x2250x2980
设备重量 约1800kg
Processing range
Travel distance
laser power
Total Power
Overall Dimensions
( height) (Square)
(Excluding laser device)
Equipment weight
Basic parameters of equipment
The characteristic of this machine is that the product is placed on the fixture without
rotation, and all cutting is performed by the cutting head rotating 360 degrees and
adjusting various angles to achieve comprehensive cutting of various products. The fixture is
simplified, improving the motion performance of the equipment and enhancing the cutting
accuracy to a greater extent. The machine adopts a programming-free multi-dimensional
angle five-axis cutting system, which is suitable for cutting irregular curved surfaces of
various shapes.
Dual-pendulum-axis five-axis laser cutting machine
三 维 激 光 切 割 机 制 造 商 3D laser cutting machine manufacturer
