world of innovation

VPower 120 – 300 t R

For flexible assembly injection molding

2

ERGONOMICAL − FLEXIBLE − HIGHLY EFFICIENT

More productivity through optimal ergonomic design

The advantages of the VPower R

» Innovative 2-tie-bar rotary table machine concept

» Reduced footprint compared to predecessor models

» Servo-driven rotary tables for 2-, 3- and 4-station applications

» Low, ergonomic working height

» Injection unit convertible to horizontal or vertical positioning

» Ultimate mold protection through homogeneous force transmission (Uniforce) in the mold

clamping area

» Easy access to media supply connections below the rotary table

» Optimal energy efficiency with servo-electric and servo-hydraulic drives

» Self-explanatory touch screen operation of the Unilog B8 control system

» Prepared for conversion into a production cell with the Wittmann 4.0 “Plug & Produce”

integration package

The machine series

VPower R: 3 rotary table diameters – 120 to 300 t clamping force*

*more models and rotary table sizes in planning

3

VPower R

The system highlights

» Rotary table clamping unit without central tie-bar

A distinctive feature of the VPower is its optimally

accessible rotary table system which, unlike its predecessor model, has dispensed with a central tie-bar in

the rotation center. The servo-driven rotary table has

been combined with a 2-tie-bar portal clamping unit

equipped with two traveling cylinders positioned on

the outside for fast opening and closing.

» 2-tie-bar clamping unit modeled on nature

The design of the clamping unit has followed a model

from nature to make it both rigid and light. The new

Uniforce compensation plate system between the

horizontal beams and the mold clamping area also

provides an unprecedentedly even and gentle force

transmission to the mold.

» Fast rotary tables

VPower rotary tables are currently available with

diameters of 1300 to 2000 mm and combined with

servo-electric drives for short rotation times and highprecision positioning. A central lubrication system for

all moving parts and seals to prevent penetration of

liquids or particles provides highest possible operational safety.

» Media supply connection points at the

rotary table center

The tie-bar-less rotation center provides ample space

for the installation of cooling water, hydraulic oil, compressed air and power supply connections under the

rotary table. The connections to the molds can be led

through the center of the rotary table either via direct

tubing or via an oscillating or rotary distributor.

» General convertibility from H to V injection

and vice versa

The modular VPower concept consisting of clamping

units of variable sizes and a compact drive model

across all sizes is the prerequisite for a minimal footprint. The installation points for the injection units are

designed to enable easy conversion of the injection

unit from horizontal to vertical configuration and vice

versa.

4

VPower R CLAMPING UNIT

Top scores for ergonomics and force distribution

The clamping system of the VPower machine series has incorporated in its technology proven, stress-optimized design elements from

nature. It takes the form of a 2-tie-bar portal system offering wellbalanced force transmission combined with light weight. The movements are carried out via two low-volume fast-stroking cylinders,

while the clamping force is applied via two pulling high-pressure

cylinders inside the frame base and the crosshead.

NEW: Uniforce compensation plate system for maximum mold

protection

A new feature is a Uniforce compensation plate system between the

frame crosshead and the mold platen, which neutralizes the flexural

deformation effect on the clamping area, caused by the force transmission, thus ensuring a so far unparalleled, even force distribution

on the mold to reduce wear.

The advantages

» Ample space and symmetrical force distribution

» Symmetrical and evenly distributed force transmission across the

clamping area ensures maximum protection of the molds.

» Deformation of the rotary table and the mold platens reduced to

a minimum

5

ROTARY TABLES

Fast and precise

» All rotary tables are equipped with servo drives for short rotation

times.

» Available for either oscillating 2-station operation or rotating 2-,

3- or 4-station operation

» Precise positioning through electronic rotation angle control

» Dynamic, highly accurate end position control

» End position definition through indexing

» Low height and thus overall ergonomically favorable working

height of the clamping unit

» All rotary tables come with a central opening for insertion of

cable and/or tube connections (only for oscillating operation),

or a rotating conduit for media connections.

» Rotary union for up to 9 media circuits (temperature control,

pneumatics, hydraulics) as well as power circuits and sensors are

available on an optional basis.

» Central greasing for bearings, gears and low-friction sliding areas

» Fully sealed circumference of the rotary table to prevent penetration of liquids and particles

Extension options

» Additional media circuits

» Customized ejector positioning

» Installation of magnetic mold platens

» Data transmission modules

6

INJECTION UNIT

Versatile horizontal – vertical

Anti-wear options

In addition to the high-quality

standard finish, an extensive

range of optional versions with

extra anti-wear and/or anticorrosion protection is available.

Pre-defined option packages

and a selection matrix facilitate

the choice of the right version.

Proven plasticizing technology

» All screws from 25 mm upwards come with a 22:1 L/D ratio.

» All injection aggregates offer a wide range of injection pressures

(from 3000 bar for the smallest and up to about 1600 bar for

the largest screw diameters).

» Moment-free nozzle contact through axial positioning of the

traveling cylinders for the plasticizing aggregate

» Barrels can be inserted into different injection aggregates when

the screw diameter is identical.

» Easy access to the nozzle thanks to diagonally arranged traveling cylinders for the nozzle

» 650 mm nozzle stroke for easy removal of the barrel

» Electrical height-adjustable horizontal injection unit with path

measurement system and easy nozzle centering

» Aggregate support via linear guides

» Integrated injection block close to the injection unit

» Aggregate in V configuration free of obstruction by structural

components at the front (hopper on the right), thus minimal risk

of collision with automation equipment

» In combination with the WITTMANN BATTENFELD HiQ software

modules (optional), sensitive adjustment strategies are available

for compensation of external influencing factors such as temperature, moisture content, proportion of regrind or Masterbatch.

7

INJECTION UNIT

Flexibly horizontal or vertical

Versatile convertibility between H and V injection

The clamping units in various sizes are combined with a compact

drive module consisting of a frame which houses hydraulic pumps

and servo-electric drives and an electric control cabinet. This combination facilitates a minimal footprint.

The installation points for the injection units are designed to enable

quick and easy conversion from horizontal to vertical configuration

and vice versa, for example to meet varying production requirements. Of course, 2- or 3-color versions with two or three injection

units are also available.

Retrofitting of second injection unit possible

The machine’s drive system is laid out for operation with one injection unit as standard. But the VPower R can also be ordered ex

works with the extension option for operation with 2 aggregates for

2-component injection molding. This enables easy retrofitting of the

second plasticizing unit within a very short time.

8

DRIVE TECHNOLOGY

Energy efficiency through “Drive-on-Demand”

Responsive, precise, thrifty

“Drive-on-Demand” is the innovative combination consisting of a responsive, speed-controlled, air-cooled

servo motor and a fixed displacement pump. This drive unit is only activated when required for movements and pressure generation. During cooling periods or cycle breaks for parts handling, the servo

drive is switched off and consumes no energy. During operation, “Drive-on-Demand” is the basis for

highly dynamic, controlled machine movements and short cycle times.

As in the SmartPower machine series, the “Drive-on-Demand” system is also installed in the VPower

machines as standard, which means that this series already complies with the EU Energy Efficiency

Directive today.

The Highlights

» The VPower is equipped with a servo-hydraulic twin pump

system as standard, to enable parallel movements of the

opening and ejector strokes.

» Through encapsulation and sound insulation of the motor/pump compartment, the drive unit features extremely

low noise emission (65 dBa).

» The highly effective fine filtration of the hydraulic oil in the

main flow channel ensures long-term high precision.

9

The efficiency of assembly injection molding is largely determined

by the efficiency of insert handling. Thanks to their fundamentally

re-designed clamping unit, VPower injection molding machines offer an

unprecedented level of accessibility and ergonomic operation. This facilitates and increases productivity in parts handling by operating staff

and reduces the necessary expense for connection of handling robots.

Many years of automation expertise

With its extensive product portfolio of auxiliary equipment and injection molding machines, WITTMANN BATTENFELD is able to supply

from its own resources seamlessly integrated production cells consisting

of an injection molding machine, handling automation and auxiliaries.

WITTMANN BATTENFELD can also draw on decades of experience in

injection molding automation.

VPower PRODUCTION CELL

With WITTMANN automation

10

UNILOG B8

Complex matters simplified

Unilog B8

Highlights

» Operating logic

with a high degree of self-explanation, similar to

modern communication devices

» 2 major operating principles

– Operating/movement functions via tactile keys

– Process functions on touch screen (access via RFID,

key card or key ring)

» Process visualization

via 21.5” touch screen display (full HD),

pivoting laterally

» New screen functions

– Uniform layout for all WITTMANN appliances

– Recognition of gestures (wiping and zooming by

finger movements)

– Container function – split screen for sub-functions

and programs

» Status visualization

Uniform signaling system across the entire

WITTMANN Group

– Headline on the screen with colored status bars and

pop-up menus

– AmbiLED display on machine

» Operator assistance

– QuickSetup: process parameter setting assistant

using an integrated material database and a simple

query system to retrieve molded part data with

machine settings pre-selection

– Extensive help library integrated

The Unilog B8 machine control system is the WITTMANN BATTENFELD solution to

facilitate the operation of complex processes for human operators. For this purpose,

the integrated industrial PC has been equipped with an enlarged intuitive touch screen

operator terminal. The visualization screen is the interface to the new Windows® 10

loT operating system, which offers extensive process control functions. Next to the pivotable monitor screen, a connected panel/handset is mounted on the machine’s central

console.

11

The process in constant view

» SmartEdit

SmartEdit is a visual, icon-based cycle sequence programming

facility, which enables direct addition of special functions (core

pulls, air valves, etc.) based on a standard process via touch operation on the screen. In this way, a total user-defined sequence

can be compiled from a sequence menu. This machine cycle,

visualized either horizontally or vertically, can be adjusted simply

and flexibly to the process requirements by finger touch with

“drag & drop” movements.

The advantages

– Icon visualization ensures clarity.

– Clear events sequence through node diagram

– Alterations without consequences through “dry test runs”

– Theoretical process sequence can be quickly implemented in

practice.

– Automatic calculation of the automation sequence based on

the actual set-up data set without machine movements

» SmartScreen

– Partitioning of screen displays to visualize and operate two

different functions simultaneously (e.g. machines and

auxiliaries)

– Uniform design of the screen pages within the

WITTMANN Group

– Max. 3 containers can be addressed simultaneously for the

SmartScreen function.

– Adjustments of set values can be effected directly in the set

value profile.

Remote communication

» QuickLook 4.0

Production status check via smartphone – simple and comfortable:

– Production data and statuses of all essential appliances in a production cell

– Complete overview of the most important production parameters

– Access to production data, error signals and user-defined data

– The production cell overview offers a clear, simple overview of the production

cell’s general condition and that of its individual Wittmann 4.0 appliances.

» Global online service network

– Web-Service 24/7: direct Internet connection to WITTMANN BATTENFELD

service

– Web-Training: efficient staff training by means of the virtual training center

12

WITTMANN 4.0

Communication in and with production cells

With its communication standard Wittmann 4.0, the WITTMANN

Group offers a uniform data transfer platform between injection

molding machines and auxiliary equipment from WITTMANN. In

case of an appliance change, the corresponding visualizations and

settings are loaded automatically via an update function, following

the principle of “Plug & Produce”.

Connection of auxiliary via Wittmann 4.0

» WITTMANN Flowcon plus water flow regulator,

Gravimax blenders and Aton dryers

– Units directly addressed and controlled via the machine’s

control system

– Joint saving of data in the production cell, the machine and in

the network via MES

» WITTMANN robots with R8 control system

– Operation of robots via the machine’s monitor screen

– High-speed communication between machine and robot to

synchronize movements

– Important machine movements can be set via the R8 robot

control system

» WITTMANN Tempro plus D temperature controllers

– Setting and control of temperatures via the machine’s control

system possible

– All functions can be operated either on the unit or via the

machine’s control system

Integration in MES system

The integration of machines and complete production cells in an

MES system is a prerequisite for an efficient and transparent production facility according to the Industry 4.0 concept.

Depending on customers’ requirements, small and medium-sized

companies as well as global players are offered a compact MES

solution based on TEMI+. With to the Windows® 10 IoT operating

system, it is also possible to have selected status information from

all connected machines on the production floor shown under SmartMonitoring on the display screen of every machine.

“Single point entry”

via router into the

Industry 4.0 world

Wittmann 4.0 system

With Wittmann 4.0, a

machine and its robots and

auxiliaries are transformed

into a uniform technical organism, which communicates

externally via a specific IP

address. Such a “Single point

entry” with an integrated

internal firewall substantially

increases cyber security.

13

OPTIONEN

Modular and flexible

VPower

The optional highlights

» Servo-electric plasticizing

As an alternative to the standard hydro motor drive for

the rotation of the screw, a direct drive powered by a

servo motor is available as an option. It reduces energy

consumption and also offers extended scope for parallel operation of the clamping and plasticizing units.

» 2-component machine

The drive unit of the VPower provides the basic prerequisites for operation with 2 aggregates. If the machine

has been prepared for the 2-component operation, it

can either be ordered as a 2-component injection molding machine ex works, or be retrofitted with a second

plasticizing unit later.

» Media distributor rotary operation

Rotary union distributing various media and electrical

signals are available for 3- and 4-station rotary table

machines. This type of media distributor offers numerous

adjustment options for the hydraulic and pneumatic

systems, air supply connections and electrical signals.

» Pivotable control terminal

For the installation and set-up of complex molds on

the rotary table, it is of advantage for the machine

operator to keep the molds in view while programming

the control system. For this purpose, a pivotable and

rotatable control terminal is available as an option

instead of the standard fixed terminal.

» Auxiliaries from WITTMANN

The extensive range of WITTMANN auxiliary appliances offers suitable solutions for all secondary processes

of injection molding, from parts handling, material

transport and material drying to sprue recycling

and mold cooling. With the optional Wittmann 4.0

integration package, all additional appliances can be

integrated into the production cell according to the

“Plug & Produce” principle.

14

APPLICATION TECHNOLOGY

Competence above standard

» Metal/plastic assembly injection molding

Another traditional assembly application is

insert molding of metal bushing or threaded

inserts. Through insert molding, a positivelocking connection is created which is normally

superior to downstream joining by ultrasound

or hot pressing.

» Insert molding of complex electrical

structures

Embedding complex conductor tracks in plastic is a traditional assembly molding task. The

metal structures are centered inside the mold

by retractable fixing pins. Towards the end of

the injection process, the pins are pulled back

via the core pull function and the remaining

holes are filled. » Combinations of plastic with plastic

Assembly injection molding is not limited to

combinations of plastic with metal, but can

also be realized by insert molding of a prefabricated plastic part.

» Multi-component addition injection molding

Application example for the assembly of a

molded part through sequential addition of

plastic components in consecutive injection

molding stations, as illustrated here by an

automobile rain sensor part consisting of 4

components.

Photo: WITTE Automotive

Photo: WEIDMANN PLASTICS

TECHNOLOGY AG

Photo: Promotech

15

TECHNICAL DATA VPower

The maximum shotweights (g)

are calculated by multiplying the

theoretical shot volume (cm3

) by

the above factor.

Dark grey boxes = thermosets

Material Factor

ABS 0.88

CA 1.02

CAB 0.97

PA 0.91

PC 0.97

PE 0.71

PMMA 0.94

POM 1.15

PP 0.73

Material Factor

PP + 20 % Talc 0.85

PP + 40 % Talc 0.98

PP + 20 % GF 0.85

PS 0.91

PVC hard 1.12

PVC soft 1.02

SAN 0.88

SB 0.88

PF 1.3

UP 1.6

COMBINATIONS

Clamping unit Rotary

table Injection unit

t mm 130 210 350 525 750 1000 1330

120 R 1300 • • • •

120 R 1600 • • • •

160 R 1300 • • • • •

160 R 1600 • • • • •

220 R 1600 • • • •

220 R 2000 • • • •

300 R 2000 • • • •

16

STANDARD

Base machine

Drop – voltage 230/400 V/3p+N-TN/TT, 50 Hz

Painting RAL 7047 tele grey 4 / RAL 3004 crimson

Air cooling system for drive unit, water cooling for feeding zone and oil

cooler with solenoid valve

Test-run with hydraulic oil HLP32 zinc free according to DIN 51524 T2

/ purity level 17/15/12 according to ISO 4406 (attention: oils are not

included in delivery), lubricants according to H2 quality

Printed operating manual incl. user manual on USB flash drive in any EU

language acc. to definition of country incl. type examination certificate

TÜV Austria in German incl. protocol: electrical safty acc. to EN 60204-1

Injection molding machine according to machinery directive 2006/42/

EG incl. declaration of conformity and CE-marking

Hydraulics

Drive unit S0 with speed controlled servo motor for hydraulic pump to

increase the energy efficiency incl. add. pump with speed-controlled servo

motor for indexing the rotary table, core pull movement or parall. ejection

Hydraulics with oil cooler controlled in water inlet of cooling, oil level

Monitoring, oil filtration with electrical clogging indicator

Oil preheating of hydraulic drive

Clamping unit

Clamping force and closing and opening forces adjustable

Mold safety program

Exact platen parallelism with low-friction linear guides.

Mold platen according to EUROMAP 2, clamping surface metallic

bright, rest painted

Rotary table servo motor drive for 2 stations, oscillating 180°, rotary

speed adjustable via touch screen

Final positioning by means of the hydraulic index cylinder

Stainless steel cladding of rotary table

Rotary table on sliding plates: PTFF sliding surface

Central lubrication for rotary table sliding plates and gear ring

Hydr. ejector in operating position, adjustable via several ejector programs

Clamping cylinder plunger induction hardened and hard chrome-plated,

ejector piston hard chrome-plated, position sensor contactless

Pneumatic mold safety mechanism with electr. monitoring

Pre-selection of active mold lower parts (1 or 2) for production process

Injection unit

Horizontal or vertical injection unit

Horizontal injection unit offers automatic hight adjustability

Splash guard

Hydraulic screw drive

Injection, holding and back press. contr. with defined nozzle carriage press.

Plasticizing unit AK+, L/D=22, 3-zone universal screw, 3-parts check

valve, heater bands up to 350 °C w/o insulation

Thermocouple failure monitor

Maximum temperature supervision

Plug-in ceramic heater bands

Temperature control of feed throat integrated

Injection cylinder plunger hard chrome-plated and position sensor

contactless

Selectable barrel stand-by temperature

Decompression before and/or after metering

Physical units – bar, ccm, mm/s etc.

Screw protection

Auxiliaries screw speed indication

Linear interpolation of holding pressure set values

Bar chart for barrel temperature with set value and actual value display

Selectable injection pressure limitation

Changeover from inject. to holding pressure dep. on stroke, time & pressure

Open nozzle R35

Splash guard and barrel covering in standard execution according to

EN201, L/D 22 protected via transporter switch

Material hopper 6 l (MH206) for automatic material feed, sliding device

with shut-off function for material with sliding guide

Safety gate

Covering injection side – maintenance door screwed together

Safety gate with maintenance door left, right and behind electr. and hydr.

monitors, plexiglas clear / frame RAL 3004 crimson

Infrared light curtain in operating station

Electrics

Control zone for nozzle heater band 230 V

AmbiLED-status indicator

Fuse protection for sockets

Switch cabinet cooling – circ. fan for environment temperature to 30 °C

Emergency stop switch button

Printer socket

USB – 1 x operating unit

1 Ethernet interface (switch cabinet)

Printer via USB connection or network

Control system

Control system Unilog B8 – 21,5” multi-touch screen (full HD)

Pivotable control panel with selectable haptic keys

Software for operating hours counter

Closing/Opening – 5 profile steps

Ejection – 3 profile steps

Nozzle forward/back – 3 profile steps

Injection/Holding pressure – 10 profile steps

Screw speed/Back pressure – 6 profile steps

Parts counter with good/bad part evaluation

Purging program through open mold, 2-station application

Stroke zero offset settings

Start-up program

Switchover to holding pressure MASTER/SLAVE by injection time, screw

stroke/injection volume and injection pressure

Self-teaching temperature controller

Display of temperature inside electrical cabinet

Seven-day timer

Access authorization via USB interface, password system and RFID authorization system (1 x check card IT-level-15, 1 x token customer level-30

and 1 x token customer service level-20 are included in delivery)

Freely configurable status bar

Physical, process-related units

Automatic dimming

Logbook with filter function

User programming system (APS)

Userpage and note pad function

Cycle time analysis

Hardcopy function

Internal data storage via USB connection or network

Online language selection and online selection of imperial or metric units

Time monitoring

Basic Quality Monitoring (1 freely configurable network connection,

quality table with 1000 storage depth, events protocol (logbook) for 1000

events, actual value graphics with 5 curves, 1 envel. curves monitoring)

Injection, metering and demoling integral supervision

Alarm message via e-mail

QuickSetup – assistance program for initial parameter setting

Energy consumption monitoring for motors and heating

Dynamic visualization of the mold table, mold, injection, insert and

removal status as well as mold configuration

Preselection of single or multiple insert or removal processes

17

OPTION

Base machine

Regional packages, country-specific

Special voltages

Special varnishing

Handlingpack. with parted safety gate and/or. deactiv. light curtain

Parts chute for separation of good/bad parts or photoelectric ejection check

Hydraulics/Pneumatics

Drive unit S2 with speed controlled servo motor for hydr. pump incl.

add. pump for core pull movement, parall. ejection and rapid injection

Raw filter in water inlet of cooling incl. adapter with ball valve for oil

maintenance on oil tank w/o bypass filter unit

Hydraulic core pull for clamping plate, interface according to EUROMAP

13, incl. core pull pressure release

Pneum. core pull and air valves on clamping plate/rotary table, incl.

pressure regulator

Hydraulic manifolds for one mold shut-off nozzle or more

Compressed air pressure maintenance unit incl. 1 or more way pressure

regulation incl. directional exhaust valve with blocking function

Vacuum equipment on clamping plate/rotary table

Clamping unit

Mold platen according to SPI, JIS, T-slots

Mold platen incl. cooling channels and temperature regulation

Rotary table for 3 and 4 station application 120° or 90°

Mold installation dimension on customer request

Hydraulic ejector replaceable, 3 and 4 station application

Add. hydraulic ejector on clamping platen

Double check valve to keep ejector in end-position

Electric ejector with holding brake

Ejector cross according to EUROMAP/SPI

Mechanical or pneumatic ejector coupling

Ejector platen safety

Ejector back up while in two-hand operation

Injection unit

Injection unit convertable (H/V) for alternative operation

High torque hydraulic screw drive/high revolution hydraulic screw drive

Screw drive by servo motor for parallel recovery

Injection, holding and back pressure controlled via servo valve

Check valve to hold screw in position after end of dosing

Corrosion resistance injection unit

Plasticizing unit AK+, AK++, AKCN

Barrier section, screw with mixing section w/o grooves

Ball type screw tip

Melt pressure transducer, melt temperature sensor

Heater bands up to 450 °C

Special plasticizing unit for LIM, MIM, CIM, Duroplast, PVC

Barrel insulation

Open nozzles in special execution

Open Airmould-nozzles

Needle type shut-off nozzle operated with spring, pneumatically or hydraulically

Barrel covering and splash guard in special execution

Pneum. purging guard for H- and V-injection unit

Purging function via open mold on customer request incl. purging tray

w/o monitoring

Material hopper in special execution w/o pneum. shut and emptying

function w/o magnet in material hopper

Unifeed

Mixing and dosing units

Vacuum package incl. vacuum pump

Safety gate

Extended execution for manual part removal

Add. light curtain for clamping unit or 3rd operation station protection

Special protection cage for the construction of automation systems incl.

required mechanical and electrical interfaces

Cooling

Manual cooling water distributor, flow and temperatur monitoring or

with flow control, with/without blow-off valve

Solenoid valve for cooling water distributor

Machine cooling by T-piece in inlet pipe

Filter back flushable/water pressure supervision in inlet pipe

Distributor block on rotary table/clamping plate with/without insulation

Rotary distributor for conditioning, hydr. and pneum. for rotary application, w/o electr. signal transmission, contactcless, w/o slipring transmission up to 10 A power section

Electrics

Temperature control zones for hot runner

Acustic element integrated in signal lamp

Socket combination

Add. fan in electr. switch cabinet for increased environment temperature

Cabinet air conditioner

Additional emergency stop switch button

Interface for robot, conveyor belt, TCU, dosing unit, Airmould, mold

surveillance, production data logging system,

RJG eDart, Priamus BlueLine, danger zone boundary, ejection in mold

middle plate, brushing device, relay signals

Control system

Cavity pressure switchover

BNC sockets for injection process analysis

Expert Quality Monitoring (4 freely configurable network connections,

quality table with 10000 storage depth, events protocol (logbook) for

10000 events, actual value graphic with 16 curves, 4 envelope curves

monitoring, SPC charts, trend diagrams)

Mold identification

Special programs on customer request

HiQ Cushion – melt cushion control

HiQ Flow – injection integral control

HiQ Melt – monitoring of material quality

HiQ Packing – holding pressure speed limitation

Energy consumption analysis

Clamp force supervision

Special programs on customer request

Purge of cold plug

Additional output card/input card, freely programmable

Integration package Wittmann 4.0

Control panel free-standing or mounted on a pivotable arm

Additional equipment

Tool kit

Levelling pads

Lighting in mold space

Mold clamping systems in mechanical, electrical or hydraulic execution

Platform for safe access to the injection unit in V-position incl. protection with transponder switch

Integration package (robot, feeder, dosing unit, TCU, mold integration)

WITTMANN BATTENFELD web service during warranty period free of

charge

Remote control package

WITTMANN BATTENFELD GmbH

Wiener Neustädter Straße 81

2542 Kottingbrunn | Österreich

Tel.: +43 2252 404-0

info@wittmann-group.com

www.wittmann-group.com

VPower | Article number: BPK0000053 | (English) | 2022/08 | Subject to change. | Printed in Austria.