Ai
BACK TO TECH ESSENTIALS SANNENG 4.00 2026 D
Vision
Bealeading bakeware brand in Asia by profes sional,service and liability.
Ne
Ng
E NVIRONMENTAL SOCIAL GoveRNANcE
Mission
Be a promoter of food safety utensils,environmental protection,energy saving and carbon reduction.
CONTENTS
CONTENTS
BAKING INDUSTRY'SFAVORITE
SMOOTHLYNON-STICK BAKEWARE
FDA Approved Products
To improve the baking effect and quality,after long time's developing, San Neng hasbeen first to introduce Non-stick baking tray products to baking industry withfeature of anti-stick,durabilityand hygiene,the baking tray products have beenacceptedand used by many customers.The non-stick coating has been essential coating forindustrial baking products,because it has followingadvantages:
●Low friction-easy de-mould
●Non-infiltration- the coating surface do not adsorb oil or water
●Non-stick-the baking product will not be stick on baking tray
●Chemical resistance-resistant forsalt,acid and alcohol
●High temperature resistance-maintaining good mechanical strength under high termperature
Use non-stick coating to decrease cost
. Canreduce oravoid to use de-pan oil
. Good shape and stable quality of product,lowerdefect rate of product
. Remove the black spot of carbon grease adhere to the bottom of the product
. Extend shelf life for productswithoutde-panoil
. Reduce the cleancycles for baking tray
●Reduce the clean cycles for production zone and maintain production line
●Longer life-more life cycles than other coating trays
Toguarantee safety and hygiene,San Neng's product has been passed food hygiene inspection,which hasbeenusedwidely forworld customers.
Full Covered Loaf Pan (Patent No: M396618 Taiwan)
FourCornerCovered,NoHiddenDust.
-Nodust will be hiddenin four corners -Specialwire,will not cause transform -Special process,enhance the construction -High strengthenal. alloy, not easy transform
BumpsCakeMould (Patent No:M335145Taiwan,PatentNo: ZL200720042980.7 China)
Resolvetheproblemofcakemouldstacking
-Bumpsshape,easytotakeandstack -Small bumps,big function,saving timeand energy -Bumps will not cause cleaning problem
FlatBarBakingTray (PatentNo:M352331Taiwan,PatentNo:M353638,Taiwan)
Avoidoverlapproblemontheautomaticproduction line -Flatbar will enhance the flatnessand strengthen of baking tray, it would not get transformationafter using. -Special coating process will make sure the surface
coating will not damage after stacking
-Flat barstacking will have sufficient strength to support the baking tray,and not easy to tilt
-Flat bar baking traywill not cause overlapping on the automatic production line.
| Sufracg | Anodized Coating | Hard Anodized Coating | P.T.F.E Coating |
| Hydrophily Photo | |||
| Contact Angle /Hydrophily | 50°~72°/~40% | 65°~80°/50% | ~105°/~100% |
SystematicSafeguarding, Your Trustworthy Choice 一Our HAcCP Food Safety Management System.
HACCP
Infusing products with robust safety foundations has always been our unwavering pursuit. Since August 2025,we have systematically implemented the internationally recognized HACCP (Hazard Analysis and Critical Control Points) system across our entire production line.In December of the same year,we successfully obtained authoritative certification,covering the production of all qualified food-grade plastic tools (specific food-contact tools and components).
Thisisapreventive foodsafetycontrolsystem.
Through scientificanalysis of potentialhazardsacross rawmaterials,production,and storage processes,weidentify and manage critical control points-proactively preventing safety risksrather than relying solely on final inspection.
Choosing us means not only selecting a product but also embracing a scientifically verified,rigorously operated safetyassurance system.We strive to transform intangible management into tangible peace of mind that you can trust.
HACCP System Certification
Exceptional Product Safety Assurance
Every stage undergoes stringent risk assessment andmonitoring,ensuring full-process safety control from rawmaterials to finished products.
Transparentand Traceable Production Chain
A comprehensive documentation system enables clear traceability fromsource todelivery, ensuring accountability and transparency.
Stableand Reliable Quality Output
Standardized proceduresand critical-point monitoringensure consistent product performance and unwavering quality.
Commitment to International Standards
Ourcertification demonstrates professional excellence in food safety,providing a more reliable basis for yourdecision.
Coffee Environmental Friendly Journey
Back tonature.Creative imagination
Energy saving&environmental protection. Green SanNeng SanNeng R&D department keep improving to protect the environmentby usingwaste WPC(WoodPlastic Composite),shell powder,also coffee grounds in our products.
Plastic products reduction
· Aluminum alloy material,Good thermal conductivity,uniform heat,fast heat conduction · Open flame contact,Applicable to carbon furnace, gas furnace,etc · Hard Anodized,Wear resistance,scratch resistance,corrosion resistance
· Al.Alloy material,high strength,durable and not easily deformed
· Hard Anodized,the surface is easyto clean,wear resistance,scratch resistanceand corosion resistance
· Edge curling design,smooth without burr,round does not hurt hands
· Stacking storage,easy to carry,light weight,stackable
105016 3-Piece Aluminum Plates Set (Hard Anodized)
1.0mmAl.Alloy 0178x152x17/g203x178x17/g229x203x18mm
·Puretitanium material,lightweight,high strength,suitablefor mountain climbing,long-distance travel
· Spot welding process,use spot welding process,more stable
· Edge curling design,smooth without burr,round does not hurt hands
· Puretitanium material,light weight,high strength,suitable for mountain climbing,long-distance travel
· Folding handle,for easy storage,suitable for outdoor use
· Integrated molding,easy to clean,not easy to hide dirt
| Titanium Sierra Cup Bowl Titanium |
| 105001 300ml 0128x45mm |
| 105002 450ml 0140x50mm |
| TitaniumSierra Cup Bowl | Titanium |
| 105005 350ml | 0115x50mm |
| 105006 | 520ml 0130x55mm |
| Titanium |
| TitaniumSierra Cup Bowl(Titanium Coating-Black) |
| 105007 350ml 0115x50mm 105008 520ml 0130x55mm |
| Titanium Dinner Plate Titanium |
| 105011 16cm 0166x26mm |
| 105012 18cm 0185x29mm |
| 105013 20cm 0205x31mm |
| TitaniumSingle-WallCup(withlid) Titanium |
| 404001 300ml 071x80mm |
| 404002 450ml x81x90mm |
| 404003 600ml 089x100mm |
2-Piece Titanium pot and Pan Cook Set
106003 Titanium Pot:117x105/Lid:117x50mm
2-Piece Titanium pot and Pan Cook Set
106001 Titanium Pot:140x70/Lid:150x38mm
2-Piece Titanium pot and Pan Cook Set
106002 Titanium Pot:117x110/Lid:124x42mm
| Titanium Double-Wall Cup |
| Titanium 404004 300ml 076x84mm |
| 404005 450ml 089x95mm |
·One scoop three ways to use,easy to travel
Titanium 3-in-1 Cutlery Set (Knife Fork and Spoon) 105023 Titanium Total Length 183mm ·Three tableware combinations,meetdifferent needs
3-Piece Titanium Cutlery Set Titanium
105021 Knife:187mm Fork:168mm Spoon:169mm
3-Piece Titanium Cutlery Set Titanium
105022 Knife:131mm Fork:129mm Sp0on:129mm
| Outdoor Storage Bag Nylon | |
| 302002 khaki | 230x180mm |
| 302003 Green | 230x180mm |
| 302004 Azure Blue | 230x180mm |
| 302005 Navy Blue | 230x180mm |
·Food grade silicone,No odor,food contact to be more secure · Hanging hole design,Easy to store,suitable for outdoor use · Integrated forming,Easy to clean,not easy to hide dirt
Anti-slipchuck,anti-dirtyfulcrumdesign
01 Ilti-functional Scissors 420 S/S 6010 Length 235mm
· 420 stainless steel
Sharp and durable, corrosion resistant
·polydentition
It can cut meat and vegetables,clip nuts and open bottle
caps
· Quick disassemblywithout screws
Rotarydetachable,easytoclean
·Magnetic absorption sheath
Random adsorption,easy to use
2-Piece Chopping Board and KnifeSetBamboo+S/S
106017 2 Pcs/Set
· Bamboo cutting board
No paint,no wax,safe touse
· The cutting board folds
Hinge 1 8 0 ^ { \circ } flip,easy to fold and convenient storage
·Molybdenum-vanadiumsteel
High strength, corrosion resistance is not easy to rust
· Sharp blade
The cutting is smooth and effortless
·Avariety of lighting modes for a comfortable camping experience · Built-in 50o0 mah battery,6 hours of charging time, 6-24 hours of battery life
| 003005 | ABS+Iron | g108x170mm |
| 003006 | ABS+Iron | g108x170mm |
· Free installation,and the aluminumalloy seatbracket iseasy to fold, storeand expand
·Solid wooden handrails increase comfort
· Aluminum alloy seat bracket is with great durability,excellent mechanical properties and good supporting performance
· Oxford fabric iswaterproof and breathable
· Bearing capacity 200kg
Storagebag onthe back
Luxury Low Beach Chair-Gray580x650x690mm 202001 AL.Alloy ^ + TeakWood ^ + Oxford Cloth
Luxury Low Beach Chair-Black 580x650x690mm 202002 AL.Alloy ^ + TeakWood ^ + Oxford Cloth
TENT KNAPSACK CAMP PARTY
·The bracket is used foreasily folding and unfolding.Smaler size after folding and easy to carry
· Excellent mechanical properties and better support performance
· Oxford cloth material,waterproof and breathable
· Load-bearing 150KGS
·Al.Alloy desk,anti-aging and anti-corrosion,sturdy and stable,can withstand outdoor stains ·UsingPPmaterial,lowdensity, lightweight · Foldable design,space saving,convenient storage · Can be used asa desktop ·Large capacity storage,can be used in multiple scenarios
| AluminumTable Plate-1 Unit for IGT AL.Alloy |
| 001002 363x276x12mm |
| Aluminum Multi-functionaltable topextension-1 Unitfor IGT | |
| 001001 | AL.Alloy 438x335x46mm |
PPplastic ^ + Plywood 22L Foldable Storage Box with Wooden Lid (Black) 301001 420x285x235mm
Multi-way open cover, moreconvenienttopickup
PP plastic ^ + Plywood 40LFoldable Storage Baxwith Side-Opendoor(AmmyGreen) 301007 490x350x290mm
Three layers of large space camping please pack, can be more items
Large open window design, more convenient to take
freedom
The upper layer is
insect-proof,and the lower layerisdrainedand stored Fine mesh,wear resistance and tear resistance;
Two-way zipper,flexible
storage
Hanging design,folding
storage, light and portable
PPplastic ^ + Plywood 4L Foldable Storage Box with Wooden Lid (Black) 301002 525x355x290mm
PPplastic ^ + Plywood 50L Foldable Storage Box with Side-Open door (Black) 301008 525x360x340mm
3-Layer Camping Storage Net 302001 0400x850mm Polyester Mesh + Galvanized Iron
White Warm Coffee Cup -300ml (Lucky Cat) Ceramic 0771-010-44 094x84mm
White Warm Coffee Cup -300ml (Lucky Cat) Ceramic 0771-010-47 094x84mm
White Warm Coffee Cup -300ml(Lucky Cat) Ceramic 0771-010-43 094x84mm
White Warm Coffee Cup -300ml (Lucky Cat) Ceramic 0771-010-45 094x84mm
Commercial Desktop Crisp Machine
电NEW
Commercial Desktop Crisp Machine-RedS/S+ Iron+ PU CR-MB-300-001 1200x600x500mm
Commercial Desktop Crisp Machine-YellowS/S + Iron + PU CR-MB-300-002 1200x600x500mm
1
NEW
NEW
| Fan-Shaped Tapered Coffee Filter Papers (50 Pcs/Set) | Paper |
| SNP10002 Primary Color/Small | 125x70x50mm |
| SNP10003 | PrimaryColor/Middle 165x90x50mm |
| SNP10018 White Color/Small | 125x70x50mm |
| SNP10019 | White Color/Middle 165x90x50mm |
| Cupcake-ShapeTaperedCoffeeFilterPapers (50Pcs/Set) | ||
| SNP10004 | PrimaryColor/Small | 100x45x50mm |
| SNP10005 | PrimaryColor/Middle | 115x45x65mm |
| SNP10020 | White Color/Small | 100x45x50mm |
| SNP10021 | WhiteColor/Middle | 115x45x65mm |
Tapered Coffee Filter Papers (50 Pcs/Set) Paper SNP10000 Primary Color/Small 145x100mm SNP10001 Primary Color/Middle 160x115mm SNP10016 White Color/Small 145x100mm SNP10017 White Color/Middle 160x115mm
Electronic Thermometer 304 S/S+ABSPlastic SNP10100 -20\~120C
| Tapered Coffee Filter Cup | Ceramic | |
| SNP11000 | Small | 0103x80mm |
| SNP11011 | Middle | 0122x93mm |
| Fan-Shaped Coffee Filter Cup |
| Ceramic SNP11001 Small 0100x71mm |
| 0113x88mm |
| SNP11012 Middle |
1NEW
Coffee Hand Pot 304 S/S +Walnut Wood
SNP11005 for2 Persons-350ml 64x86x98mm
SNP11006 for4 Persons-600ml 75x103x118mm
Combi Oven Series
Half Sphere Mould-15 Indents (Non-stick Series 1000) SNP20029 1.5mm AL.Alloy 530x325x24mm
1/1GNAL.Alloy Perforated Sheet Pan (Non-stick Series1000) SNP20017 1.5mm Al.Alloy 530x325x12mm
Hamburger Bun Pan-8 Indents (Non-stick Series 1000) SNP20030 2.0mm Al.Alloy 530x325x18mm
SNP20023 1.5mm Al.Alloy 530x325x12mm
SNP20032 304S/S 530x325x22mm
| StainlessSteelHook(Electrolysis) |
| SNP20033 304S/S 03.4x250mm |
| StainlessSteel Cooling Rack (Electrolysis) | |
| SNP20011 | 530x325x8mm |
| StainlessSteelAirFryerTray (Electrolysis SNP20012 304S/S 530x325x45mm |
StainlessSteel Roasted Chicken Rack(Electrolysis) SNP20013 6 Holder 304S/S 530x325x152mm SNP20014 8 Holder 304S/S 530x325x152mm
| SNP20015 1 Pcs/Set 530x325x20mm |
| SNP200155 5 Pcs/Set 530x325x20mm |
| SNP20016 1 Pcs/Set 530x325x40mm |
| SNP200165 5 Pcs/Set 530x325x40mm 1.2mm Vitreous Enamel Steel |
ESG Pushers of safety, environmental protection, energy saving and carbon reduction of food appliances.
The expansion of corporate social responsibility is originaly the concept that enterprises should contribute more to society in addition to making profits.
In response to climate change, governments have implemented a series of relevant regulations and regulations, which bring risks to the business activities and business models of enterprises, The enterprises are to reduce the risk of climate change by reducing carbon emissions,improving energy efficiency, adopting renewable energy and other ways, while contributing to the environment.
In China, the concept of corporate social responsibility has been added, followed by environmental and corporate governance, which has been transformed into the latest ESG concept.
What ESG does SANNENG do?
Environment
Set up ESG project committee/ develop plastic reduction products/ develop energy saving products/ promote recoating business
Social
Environmental management systemcertificate
Governance
Public company should follow the regulations
What ESG will SANNENG do in the future?
SANNENG will make ESG points for your company
\
Bevel baking pan series products carddesign/stripdesign/ singlebeveledgedesign
Plastic & Wood series products plasticreductionprocess/ brushheadthick/foodgrade
O-l.
Y
Non-stick Series 1500 products Surfacenon-sticktreatment/ halfroundcraft/AluminumAlloymaterial
Low sugar loaf pan series products Unibody/goodwaterretention/RAngle clear
Al.Alloy Corrugated Sheet Pan
These kind of baking traysare made by the latest technology and process for baking industry (PatentNo M324477Taiwan,PatentNo:ZL200620075116.2 China)
Durable:Corrugated process enforced the strength of the material,make the tray more durable and not easily deformed,extend 1/3 of life cycle than plain tray.
Easy De-mould: Increase corrugated waving,reduce the contact size between bread and baking tray,make de-mould much easier.
Cost Saving:Corrugated process increase the air convection,shorten baking time,reduce waterloss,improve theproduct quality.
PatentNo.ZL200620075116.2
Al.Alloy Corrugated Sheet Pan 1.2mm Al.Alloy SN1313 Anodized 400x300x12mm
Al.AlloyCorrugatedSheetPan 1.2mm Al.Alloy SN1314 Non-stick Series1000 400x300x12mm
Al.Alloy CorrugatedSheetPan 1.5mm Al.Alloy SN1332 Non-stickSeries1000 600x400x20mm
1.5mm Al.Alloy Al.Alloy Corrugated SheetPan-Round Corner SN1337 Non-stick Series1000 600x400x20mm
Al.Alloy CorrugatedSheetPan 1.2mm Al.Alloy SN1317 Non-stick Series1000600x400x25mm
AlusteelCorrugatedSheetPan 0.7mm Alusteel SN1272 Non-stick Series1000 600x400x30mm SN1274 Non-stickSeries1000600x400x50mm
| Al.Alloy Corrugated SheetPan-Round Comer Anodized |
| SN1336 1.5mmAl.Alloy 600x400x20mm |
| Al.AlloyCorrugatedSheetPan | Anodized |
| SN1316 1.2mmAl.Alloy | 600x400x25mm |
| AlAlloy Corrugated Sheet Pan(Non-stick Series 1000) | |
| SN1318 1.2mmAl.Alloy | 600x400x20mm |
| SN1322 1.5mmAl.Alloy | 660x460x30mm |
Al.Alloy Corrugated SheetPan 1.2mm Al.Alloy SN1356 Non-stick Series 2000 600x400x25mm
Al.Alloy Sheet Pan
Feature for Anodized coating
Feature for Al. Alloy
Anodized-Hygiene,non-toxic,long life cycle Health-Match with food safety grade
NEW
| Al.AlloySheetPan (Anodized) |
| SN1205 1.2mmAl.Alloy 365x265x50mm |
Al.Alloy Sheet Pan-Round Corner (Anodized) SN1049 1.5mm Al.Alloy 600x400x20mm
Al.Alloy SheetPan (Anodized) SN1071 1.5mm Al.Alloy 600x400x20mm
Lightmaterial:1/3of steel weight proportion,more lightweight Fast Heat-conduction: Shorten baking time and save cost.
| Al.AlloySheetPan (Non-stickSeries1500) | |
| SN1048 1.5mmAl.Alloy | 600x400x12mm |
Al.Alloy Sheet Pan-Round Cormer (Non-stick Series1500) SN1050 1.5mm Al.Alloy 600x400x20mm
Al.Alloy Sheet Pan (Non-stick Series1500)
SN1072 1.5mm Al.Alloy 600x400x20mm
Al.Alloy Sheet Pan (Anodized) 1.5mm Al.Alloy SN1062 660x460x30mm
| Al.Alloy Sheet Pan (Anodized) | ||
| SN1527 | 1.2mm Al.Alloy | 600x400x25mm |
| SN1532 | 1.0mm Al.Alloy | 600x400x25mm |
Al.AlloySheetPan
SN1510 1.2mm Al.Alloy 600x400x50mm
| Al.AlloySheetPan (Non-stickSeries1000) |
| SN1076 1.2mm Al.Alloy 600x400x20mm |
| SN1533 1.0mmAl.Alloy 600x400x25mm |
| Al.Alloy Sheet Pan (Non-stick Series 1500) |
| SN1528 1.2mmAl.Alloy 600x400x25mm |
| Al.Alloy Sheet Pan (Non-stick Series 3000) |
| SN1541 1.2mm Al.Alloy 600x400x25mm |
| Al.Alloy Sheet Pan (Anodized) | |
| SN1061 1.2mm Al.Alloy | 660x460x30mm |
| SN1075 1.2mm Al.Alloy | 600x400x20mm |
Al.Alloy Sheet Pan (Non-stick Series 1000) SN1063 1.5mm Al.Alloy 660x460×30mm
Al.Alloy Sheet Pan-Round Corner (Non-stick Series3000) SN1543 1.5mm Al.Alloy 600x400x20mm
Al.Alloy Sheet Pan (Non-stick Series2000) SN1355 1.2mm Al.Alloy 600x400x25mm
| Al.Alloy Sheet Pan (Anodized) | |
| SN1101 1.5mmAl.Alloy | 448x348x20mm |
| Al.AlloySheetPan(Non-stickSeries3000) | |
| SN1542 1.5mmAl.Alloy | 600x400x20mm |
AlAlloy SheetPan-Round Comer (Non-stick Series 2000) SN1051 1.5mm Al.Alloy 600x400x20mm
| Al.AlloySheetPan(Non-stickSeries2000) | |
| SN1070 1.5mmAl.Alloy | 600x400x20mm |
SolidityAl.Alloy Sheet-Round Cormer(Non-stick Series1000) SN1174 1.5mm Al.Alloy 600x400x20mm
Solidity Al.Alloy Sheet Pan (Non-stick Series 1000) SN1172 1.5mm Al.Alloy 600x400x20mm
Al.Alloy Sheet Pan (Hard Anodized) SN1046 2.0mmAl.Alloy 600x400x4mm
| Al.AlloySheetPan (Anodized) |
| SN1107 1.5mmAl.Alloy 500×350x15mm |
| Al.AlloySheetPan (Anodized) | |
| SN1106 1.5mm Al.Alloy | 450x350x55mm |
| Al.Alloy Sheet Pan (Non-stick Series 1000) | |
| SN1102 1.5mm Al.Alloy | 448x348x20mm |
| SN1208 1.5mm Al.Alloy | 395x325x20mm |
| SN1116 1.2mmAl.Alloy | 365x265x18mm |
| Al.AlloySheetPan (Anodized) | |
| SN1121 1.5mmAl.Alloy | 445x330x20mm |
| Al.AlloySheetPan (Non-stickSeries1000) | |
| SN1122 1.5mmAl.Alloy | 445x330x20mm |
| Al.Alloy Sheet Pan (Anodized) | |
| SN1125 1.2mm Al.Alloy | 450x350x25mm |
| Al.Alloy SheetPan (Non-stick Series 1000) |
| SN1126 1.2mm Al.Alloy 450x350x25mm |
| Al.Alloy Sheet Pan (Anodized) | |
| SN1201 1.2mm Al.Alloy | 365x265x30mm |
| Al.AlloySheetPan (Non-stick Series1000) | |
| SN1202 1.2mm Al.Alloy | 365x265x30mm |
| SN1206 1.2mm Al.Alloy | 365x265x50mm |
| Al.AlloySheetPan (Non-stickSeries1000) | |
| SN1100 1.5mm Al.Alloy | 420x340x35mm |
| Al.AlloySheetPan (Non-stickSeries1000) | |
| SN1209 1.5mm Al.Alloy | 395x325x35mm |
| SN1117 | 1.5mm Al.Alloy | 350x250x30mm |
| SN1118 | 1.5mm Al.Alloy | 445x330x35mm |
| Al.Alloy Sheet Pan (Anodized) |
| SN1114 1.2mm Al.Alloy 365x265x18mm |
| Al.AlloySheetPan (Anodized) | |
| SN1108 1.5mmAl.Alloy | 350×250x15mm |
| Al.AlloySquare SheetPan (Non-stickSeries1000) | |
| SN1312 1.5mm Al.Alloy | 280x280x30mm |
| SN13123 1.5mmAl.Alloy | 280x280x30mm |
Square pan (Non-stick Series 1000) SN1160 1.5mmAl.Alloy 280x280x15mm
Al.Alloy SheetPan (Non-stick Series1000) SN1124 1.5mm Al.Alloy 280x245x30mm
SN1128 1.5mm Al.Alloy 205x205x50mm
Al.Alloy Perforated Sheet Pan-Flat Bar (Anodized) SN1093 1.2mm Al.Alloy 600x400x20mm
Honey Cake Pan (Anodized) SN1405 Al.Alloy+Wood 680x580x80mm
| Al.AlloyPerforatedSheetPan (Anodized) | |
| SN1073 1.2mm Al.Alloy | 600x400x20mm |
| SN1064 1.5mm Al.Alloy | 660x460x25mm |
| Al.AlloyPerforatedCoolingTray (HardAnodized) |
| SN1565 2.0mmAl.Alloy 600x400x4mm |
| Al.Alloy Perforated SheetPan (Non-stickSeries1000) | |
| SN1526 | 1.2mm Al.Alloy 600x400x25mm |
| SN1530 1.0mm Al.Alloy | 600x400x25mm |
| SN1563 1.5mm Al.Alloy | 675x435mm |
| SN1562 1.5mm Al.Alloy | 660x460mm |
| SN1564 1.5mmAl.Alloy | 600x400mm |
| Al.Alloy Perforated Sheet Pan (Anodized) | |
| SN1525 | 1.2mm Al.Alloy 600x400x25mm |
| SN1534 1.0mm Al.Alloy | 600x400x25mm |
| PuffPastryBakingTray | Anodized |
| SN1216 1.2mm Al.Alloy | 400x300x19mm |
| Al.AlloySheetPan (Non-stickSeries1000) | |
| SN1157 1.2mm Al.Alloy | 460x330x11mm |
| StainlessSteelPerforatedSheetPan | |
| SN1348 0.7mm304S/S | 600x400x30mm |
| StainlessSteelSheetPan | |
| SN1340 | 0.7mm304 S/S 600x400x30mm |
| SN1341 | 1.0mm304S/S | 500x350x15mm |
| SN1342 | 1.0mm 304S/S | 350x250x15mm |
| StainlessSteel PerforatedSheetPan (Electrolysis) | ||
| SN1346 | 0.7mm 304 S/S | 600x400x20mm |
| SN1347 | 0.7mm304S/S | 450x350x20mm |
| StainlessSteelPerforatedSheetPan (Electrolysis) | ||
| SN1548 | 1.0mm304S/S | 600x400x32mm |
| SN1549 | 1.0mm304S/S | 465x330x32mm |
Alusteel Sheet Pan
FeatureforAlusteel Non-stick BakingTray
The combination between Non-stick and Alusteel sheet generate multiplebenefits,food grade non-stick tefloncoated products wil save oiland time,improve the baking color,betterappearance, reduceunqualifiedratioandcleaningcost.Alusteelis3 timesmore durable than normal al.alloy sheet,anti-rust and non-toxic, teflon coating is not easy to peel off.
Alusteel SheetPan
| Alusteel Sheet Pan (Non-stick Series1000) | |
| SN1536 0.6mmAlusteel | 600x400x30mm |
| SN1538 0.6mm Alusteel | 600x400x50mm |
| SN1077 | 0.7mmAlusteel | 600x400x30mm |
| SN1079 | 0.7mm Alusteel | 600x400x50mm |
AlusteelCorrugatedSheetPan (Non-stickSeries1000) SN1285 0.7mmAlusteel 720x400x30mm
Alusteel Sheet Pan (Non-stick Series1000) SN1156 0.7mm Alusteel 450x350x25mm
| SN1535 | 0.6mm Alusteel | 600x400x30mm |
| SN1537 | 0.6mm Alusteel | 600x400x50mm |
| AlusteelSheetPan(Non-stickSeries1000) |
| SN1104 0.7mmAlusteel 530x380x32mm |
| AlusteelSheetPan (Non-stickSeries1500) |
| SN1078 0.7mmAlusteel 600x400x30mm |
| SN1080 0.7mmAlusteel 600x400x50mm |
Avoidoverlapproblemontheautomaticproductionline -Flat bar will enhance the flatness and strengthen the baking tray it would not easily deformedafterused. -Special coating process will make sure the surface coating will not damage after stacking.
-Flatbar stacking will have sufficient strength to support the baking tray,and not easy to tilt.
-Flat barbaking tray will not cause overlapping problem on the automatic production line.
| AiusteerSneetran-ratDar SN1081 0.7mmAlusteel |
| 600x400x30mm SN1084 0.7mmAlusteel 600x400x20mm |
| SN1087 0.7mmAlusteel 600x400x50mm |
| SN1096 0.7mm Alusteel 600x400x25mm |
| Al.Alloy Sheet Pan-Flat Bar(Anodized) |
| SN1091 1.2mm Al.Alloy 600x400x20mm |
| Alusteel Sheet Pan-Flat Bar (Non-stick Series 1000) |
| SN1082 0.7mmAlusteel 600x400x30mm |
| SN1088 0.7mmAlusteel 600x400x50mm |
| SN1097 0.7mmAlusteel 600x400x25mm |
| Alusteel Sheet Pan-FlatBar (Non-stick Series1500) |
| SN1085 0.7mmAlusteel 600x400x20mm |
Al.Alloy Sheet Pan-Flat Bar 1.2mm Al.Alloy SN1351 Non-stick Series 2000 600x400x20mm SN1092 Non-stick Series1500 600x400x20mm
| AlusteelSheetPan-FlatBar(Non-stickSeries2000) SN1359 0.7mmAlusteel 600x400x30mm |
| SN1595 | Al.Alloy 600x400x33mm |
| SN1593 Al.Alloy | 660x460x33mm |
| 4Rows Baguette Tray (Non-stick Series1000) | |
| SN1583 Al.Alloy | 600x400x33mm |
| 4RowsBaguetteTray (Non-stickSeries1000) | |
| SN1594 AI.Alloy | 600x400x33mm |
| SN1596 | Al.Alloy 600x400x33mm |
3Rows Baguette Tray (Non-stick Series1000) SN1597 AI.Alloy 365x265x32mm
5Rows Baguette Tray (Non-stick Series1000) SN1598 AI.Alloy 600x400x32mm
| 6Rows Baguette Tray (Non-stick Series1000) | |
| SN1592 Al.Alloy 660x460x33mm | |
2.8" Hamburger Bun Pan(Non-stick Series 1000) SN1612 24Indents (Flat Base) 600x400x38mm 0.8mm Alusteelg70x65x12.5mm
4" Hamburger Bun Pan (Non-stick Series 1000) SN1615 15 Indents (Curved Base) 600x400x40mm0.8mmAlusteelg102x94x15mm
3.5"Hamburger Bun Pan (Non-stick Series 1000) SN1613 15 Indents (Curved Base) 600x400x40mm 0.8mm Alusteelg93x84x15mm
4"Hamburger Bun Pan (Non-stick Series 1000) SN1618 15 Indents (Curved Base) 600x400x40mm0.8mm Alusteelg107x93x15mm




