该页无缩略图
DAB PUMPS reserves the right to make modifications without notice
1
CP2E, CP2-GE / DCP2E, DCP2-GE
ELECTRONIC IN-LINE PUMPS
APPLICATIONS
Circulation pumps with inline ports, suitable for use in heating and air-conditioning, refrigeration and domestic hot water systems. The use of the NgDrive
variable frequency drive makes this a particularly versatile unit by ensuring that performance is automatically adjusted to match the system's different
requirements, at the same time maintaining constant differential pressures. They come in single and twin-head versions.
CONSTRUCTION FEATURES OF THE PUMP
PN10 or PN16 flanged inlet and outlet with threaded holes for control pressure gauges. Cast iron pump casing and motor mount, cast iron or
technopolymer impeller depending on the model. AISI 316 motor shaft. Mechanical seal with silicon carbide stationary face and rotating face.
CONSTRUCTION FEATURES OF THE MOTOR
IE5-rated permanent magnet motor on models up to 2.2 kW paired with NgDrive to achieve the highest possible efficiency rating. IE3 motor paired with
NgDrive on 3kW models and up.
CONSTRUCTION FEATURES OF THE ELECTRONIC
The inline motor-driven pumps are controlled using NgDrive, the variable-speed control unit designed to adapt performance to match the system's actual
requirements, with a resulting reduction in power demand along with energy savings. The gradual motor speed adjustment decreases the potential for
component wear and protects the pump from water hammer.
The graphic display makes the unit easy to read and simplifies the process of entering operation settings; system setup is also very simple thanks to the
relevant wizard.
The design has been developed to facilitate installation and maintenance are straightforward: it is easy to handle; it can be mounted on a wall or on the
pump in 5 different positions; and it is split into two parts so that the various components inside can be mounted and serviced separately.
It delivers efficiency, energy savings, and is supremely user friendly.
TECHNICAL DATA
Operating range: up to 105 m3
/h
Head: up to 110 m
Type of pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallised and chemically neutral, with properties
similar to water
Glycol percentage (maximum): 50%
Liquid temperature range: from -15 °C to +140 °C
Maximum ambient temperature: +50 °C
Maximum operating pressure: 1600 kPa / 16 bar
Flanging or threading: flanging PN 10/PN16
Motor efficiency: IE5 up to 2,2 kW; IE3 ≥ 0,75 kW
Motor protection class: IP 55
Motor insulation class: F
Impeller material: cast iron or technopolymer
Three phase power input: 3x230 V 50 Hz / 3x400 V 50 Hz
Max rpm: 2910 rpm
Type of installation: Fixed in horizontal or vertical position with motor in
up position. Only in vertical position for motor from 7,5 kW. BUILT-IN
CONNECTIVITY
FOR PROFESSIONALS
AND END USERS
DAB PUMPS reserves the right to make modifications without notice
2
MATERIALS
N. PARTS MATERIALS
1 PUMP BODY CAST IRON EN GJL250 UNI EN 1561
2 SUPPORT CAST IRON EN GJL250 UNI EN 1561
3 IMPELLER CAST IRON EN GJL200 UNI EN 1561 AND ULTRASON E 2010
4 SHAFT WITH ROTOR AISI 316
5 MECHANICAL SEAL SPRING AISI 316 - SIC / SIC - EPDM
6 O-RING EPDM
1
2
4
3
5
6
Denominations:
(example)
CP2E, CP2-GE / DCP2E, DCP2-GE
ELECTRONIC IN-LINE PUMPS
Twin version
Series
P2 = 2-pole motor
G = version with coupling
E = motor complete with
inverter
(DN) nominal diameter
of the flanged ports
Maximum head (cm)
M = single-phase motor
T = three-phase motor
D C P2 -G E 32 / 4800 M
DAB PUMPS reserves the right to make modifications without notice
3
CONSTRUCTION FEATURES ELECTRICAL SECTION
NGDRIVE
VERSATILITY and EASE of use make NgDrive the most comprehensive controller
available in the market. A new generation of variable frequency drives, designed
for the control and protection of circulation and pressure booster pumps, adjusting
them to suit the system’s actual demands, thus resulting in both occupant comfort
and real energy savings.
With cutting-edge TECHNOLOGIES and the DAB group’s lengthy experience, NgDrive
features a meticulously engineered design that is not just design for design’s sake;
instead, it was conceived specifically to cater to the needs of its users. Moreover, it
is split into two parts that can be separated so that the components inside can even
be fitted at different times and serviced without disconnecting any wires.
With the option of being fitted on the actual pump or wall mounted, NgDrive gives
you the tool you need to get the most out of the DAB range of pumps and use them
in the most efficient way. NgDrive has been designed and built to offer the best user
experience: easy to install, set up and monitor.
- 2.8” TFT colour display
OPERATING MODES
NgDrive can be used to control pumps both for pressure boosting and circulation systems. Constant-pressure control is the method used for pressure
boosting applications, while for circulation, the control options are as follows:
• Constant speed
• Constant differential temperature
• Constant temperature
• Proportional differential pressure
• Constant differential pressure
- A single software for different applications (circulation and pressure boosting)
- Keypad with intuitive commands
- Setup and getting started wizards
- Software updates via app
- Integrated connectivity (Wi-fi, Bluetooth, Wireless, Modbus) for remote control
NgDrive introduces new standards in DAB technology: cooling via built-in fan with
speed control based on temperature, and architecture with four microprocessors:
- Wireless communication
- Pump functions managed via display
- Motor control
- Input and output signals
Between two and a maximum of six variable frequency drives can be connected
wirelessly.
Constant speed
The speed of rotation is kept at a constant rpm. This speed can be set in a range from a minimum value to the circulation
pump’s nominal frequency. This mode can be set via the control panel.
The technological product of over 40 years’ experience in the water handling sector. NgDrive is not just a variable frequency drive, it is the hardware
component of a fully-fledged smart system, conceived to cater to the needs of its users, not least in its design.
Costant differential pressure
The maximum head is constant, regardless of the water demand. This mode can be set via the control panel, where you
can specify the pressure setpoint and, where applicable, the liquid temperature dependence (in this case, you will need
to connect a T1 and T2 sensor).
Proportional differential pressure
In this control mode, the differential pressure is reduced or increased as water demand drops or rises. This mode can
be set via the control panel, where you can specify the pressure setpoint and, where applicable, the liquid temperature
dependence (in this case, you will need to connect a T1 and T2 sensor).
DAB PUMPS reserves the right to make modifications without notice
4
CONSTRUCTION FEATURES ELECTRICAL SECTION
NGDRIVE
Constant temperature
With this function, the circulation pump increases or decreases flow rate to keep constant the temperature measured by
the NTC sensor connected.
You can set 2 operating modes:
• T1 increase mode –› if the desired temperature (Ts) is greater than the temperature measured (T1), the circulation pump
increases flow rate until the temperature reaches Ts.
• T1 decrease mode –› if the desired temperature (Ts) is greater than the temperature measured (T1), the circulation pump
decreases flow rate until the temperature reaches Ts
Constant temperature
With this function, the circulation pump increases or decreases flow rate to keep constant the temperature measured by
the NTC sensor connected.
You can set 2 operating modes:
• T2 increase mode –› if the desired temperature (Ts) is lower than the temperature measured (T1 ), the circulation pump
increases flow rate until the temperature reaches Ts.
• T1 decrease mode –› if the desired temperature (Ts) is greater than the temperature measured (T1), the circulation pump
decreases flow rate until the temperature reaches Ts.
Constant temperature difference
With this function, the circulation pump increases or decreases flow rate to keep constant the T1-T2 temperature differ-
∆T ence as an absolute value. This mode can be set via the control panel, where you can specify the temperature setpoint.
T2
T1
DAB PUMPS reserves the right to make modifications without notice
5
CP2E, CP2-GE / DCP2E, DCP2-GE
ELECTRONIC IN-LINE PUMPS
SELECTION TABLE - CP2E
SELECTION TABLE - DCP2E
MODEL
HYDRAULIC DATA
Q=m3
/h 0 10 15 20 30 35
Q=l/min 0 167 250 333 500 583
CP2E 32-1400 IE5
H
(m)
14,2 12,6 11,1 9,0
CP2E 32-1800 IE5 17,8 16,4 14,8 12,6 6,3
CP2E 32-2100 IE5 22,7 17,6 10,0
CP2E 32-2200 IE5 22,5 21,3 19,7 17,3 10,5 5,9
CP2E 32-2700 IE5 26,7 26,2 24,8 22,8 17,1 13,3
CP2E 32-3600 IE3 36,4 35,5 33,5 31,0 24,8
CP2E 32-4000 IE3 40,3 39,4 37,4 34,9 28,4 24,5
CP2-GE 32-4800 IE3 48,7 48,1 46,5 44,2 37,9 33,8
MODEL
HYDRAULIC DATA
Q=m3
/h 0 10 15 20 30 35
Q=l/min 0 167 250 333 500 583
DCP2E 32-1400 IE5
H
(m)
14,2 12,3 10,3 7,2
DCP2E 32-1800 IE5 17,6 15,9 13,8 10,8 1,5
DCP2E 32-2100 IE5 23,0 17,3 9,1
DCP2E 32-2200 IE5 22,8 21,4 19,3 16,1 6,5 0,4
DCP2E 32-2700 IE5 27,0 25,7 24,3 22,1 16,4 12,6
DCP2E 32-3600 IE3 36,9 35,0 33,1 30,4 22,6
DCP2E 32-4000 IE3 40,9 39,1 37,0 34,1 25,9 21,0
DCP2-GE 32-4800 IE3 49,4 47,8 46,2 43,7 34,9 28,9
DAB PUMPS reserves the right to make modifications without notice
6
CP2E, CP2-GE / DCP2E, DCP2-GE
ELECTRONIC IN-LINE PUMPS
SELECTION TABLE - CP2E
SELECTION TABLE - DCP2E
MODEL
HYDRAULIC DATA
Q=m3
/h 0 10 15 20 30 40 50 70
Q=l/min 0 167 250 333 500 667 833 1167
CP2E 40-1900 IE5
H
(m)
19,1 19,4 19,3 18,4 13,9 7,4
CP2E 40-2200 IE5 22,3 22,8 22,4 21,7 19,2 15,5
CP2E 40-2800 IE3 27,6 27,8 27,2 26,3 23,5 19,8
CP2E 40-3300 IE3 33,1 33,5 32,9 32,0 29,2 25,3
CP2-GE 40-4000 IE3 38,5 39,0 38,9 38,3 35,7 30,9
CP2-GE 40-5000 IE3 48,8 49,2 49,0 48,6 46,9 44,3
CP2-GE 40-6600 IE3 66,2 66,4 66,1 65,6 63,6 60,5
CP2-GE 40-8200 IE3 82,0 82,1 81,8 81,2 78,9 74,9 69,1 52,9
MODEL
HYDRAULIC DATA
Q=m3
/h 0 10 15 20 30 40 50 70
Q=l/min 0 167 250 333 500 667 833 1167
DCP2E 40-1900 IE5
H
(m)
19,0 19,2 18,7 17,7 14,4 9,0
DCP2E 40-2200 IE5 22,9 23,5 23,0 22,2 19,2 14,5
DCP2E 40-2800 IE3 27,7 28,2 27,9 27,1 24,1 19,2
DCP2E 40-3300 IE3 33,4 33,9 33,5 32,8 29,9 25,2
DCP2-GE 40-4000 IE3 39,2 39,5 39,4 38,9 36,3 31,1
DCP2-GE 40-5000 IE3 49,3 49,4 49,0 48,4 45,9 41,7
DCP2-GE 40-6600 IE3 67,9 67,6 67,0 66,2 63,3 58,7
DCP2-GE 40-8200 IE3 83,4 84,3 83,8 82,7 79,2 74,1 67,4 46,1
DAB PUMPS reserves the right to make modifications without notice
7
SELECTION TABLE - DCP2E
CP2E, CP2-GE / DCP2E, DCP2-GE
ELECTRONIC IN-LINE PUMPS
SELECTION TABLE - CP2E
MODEL
HYDRAULIC DATA
Q=m3
/h 0 10 20 30 40 50 60 70
Q=l/min 0 167 250 333 500 667 833 1167
DCP2E 50-800 IE5
H
(m)
8,1 7,7 6,1 4,0
DCP2E 50-1100 IE5 11,4 11,2 10,1 8,1 5,5
DCP2E 50-1400 IE5 14,7 14,5 13,7 12,1 9,6 6,4 2,5
DCP2E 50-1800 IE5 17,4 17,5 16,9 15,6 13,4 10,2 5,9
DCP2E 50-2100 IE3 22,1 22,4 21,7 20,1 17,8 14,6 10,5 5,2
DCP2E 50-2800 IE3 28,6 28,1 26,9 24,8 21,7 17,6 12,5 6,7
DCP2-GE 50-3300 IE3 34,6 34,5 33,5 31,5 28,4 24,3 19,2 12,9
DCP2-GE 50-4400 IE3 44,3 44,5 43,7 41,9 38,8 34,5 29,0 22,5
DCP2-GE 50-5200 IE3 53,3 54,1 53,7 52,4 50,1 47,1 43,3 38,8
DCP2-GE 50-6600 IE3 67,2 68,8 68,4 66,8 64,4 61,5 58,2 54,4
MODEL
HYDRAULIC DATA
Q=m3
/h 0 10 20 30 40 50 60 70
Q=l/min 0 167 250 333 500 667 833 1167
CP2E 50-800 IE5
H
(m)
8,0 7,7 6,5 4,6
CP2E 50-1100 IE5 11,3 11,2 10,5 9,0 6,7 4,0 1,3
CP2E 50-1400 IE5 14,1 14,2 13,8 12,6 10,7 7,9 4,3
CP2E 50-1800 IE5 17,4 17,8 17,5 16,5 14,8 12,4 9,1
CP2E 50-2100 IE3 21,4 21,8 21,4 20,1 18,1 15,3 11,6 6,8
CP2E 50-2800 IE3 27,9 27,6 26,6 24,9 22,4 19,1 15,2 10,5
CP2-GE 50-3300 IE3 33,8 33,9 33,0 31,2 28,6 25,2 21,1 16,1
CP2-GE 50-4400 IE3 43,7 44,0 43,2 41,5 38,8 35,1 30,5 25,0
CP2-GE 50-5200 IE3 52,0 53,2 52,9 51,7 49,8 47,3 44,2 40,6
CP2-GE 50-6600 IE3 65,5 67,2 66,8 65,2 62,9 60,3 57,6 54,5
DAB PUMPS reserves the right to make modifications without notice
8
CP2E - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C up to140°C - Maximum operating pressure: 16 bar (1600 kPa)
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
Q m3
/h
Q m3
/h
0
H
m
0
40 4
8 80
12 120
16 160
20 200
24 240
P
kPa
0
20
40
60
80
H
ft CP2E
0
1500
3000
4500
W
0 4 8 12 16 20 24 28 32 36 40 44
Q l/min
Q l/s
0 200 400 600
0 2 4 6 8 10 12
0 4 8 12 16 20 24 28 32 36 40 44
0 40 80 120 160 Q US gpm
0 40 80 120 Q IMP gpm
CP2E 32-2100 M CP2E 32-1400 M CP2E 32-1800 M
CP2E 32-2200 M
CP2E 32-2700 M
CP2E 32-2100 M
CP2E 32-1400 M
CP2E 32-1800 M
CP2E 32-2200 M
CP2E 32-2700 M
L
L1 L2
D DNA DNM
D4
D3
B
A
D1
H1
C
C
H
M
D2
MODEL A B C D D1 D2 D3 D4 H H1 L L1 L2 M DNA DNM
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
CP2E 32-1400 IE5 467 255 140 78 90 100 141 19 426 98 260 135 125 10 32 32 600 300 640 0,12 31
CP2E 32-1800 IE5 537 256 140 78 90 100 140 19 430 98 260 135 125 10 32 32 600 300 640 0,12 31
CP2E 32-2100 IE5 467 255 140 78 90 100 141 19 426 98 260 135 125 10 32 32 600 300 640 0,12 31
CP2E 32-2200 IE5 537 256 140 78 90 100 140 19 430 98 260 135 125 10 32 32 600 300 640 0,12 31
CP2E 32-2700 IE5 537 256 180 79 90 100 140 19 460 90 320 165 155 10 32 32 600 300 640 0,12 41,5
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
CP2E 32-1400 IE5
260 DN 32 PN 16
DN 32 PN 10
230 V
0,93 0,7 0,9 5,1 -
CP2E 32-1800 IE5 1,5 1,1 1,5 6,64 -
CP2E 32-2100 IE5 1,13 0,7 0,9 5 -
CP2E 32-2200 IE5 2 1,5 2 8,8 -
CP2E 32-2700 IE5 320 400 V 3,4 2,2 3 - 5,3
DAB PUMPS reserves the right to make modifications without notice
9
CP2E, CP2-GE - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C to +140°C - Maximum operating pressure: 16 bar (1600 kPa)
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
CP2E 32-4000 T
CP2E 32-4000 T
CP2E 32-3600 T
CP2E 32-3600 T
2000
4000
6000
W
CP2-GE 32-4800 T
CP2-GE 32-4800 T
0 3 6 9 12 15 18 21 24 27 30 33 36 39 Q m3
/h
0
5
10
15
20
25
30
35
40
45
50
55
60
H
m
0
100
200
300
400
500
600
P
kPa
0 100 200 300 400 500 600 Q l/min
0 1 2 3 4 5 6 7 8 9 10 11 Q l/s
0
20
40
60
80
100
120
140
160
180
200
H
ft
0 20 40 60 80 100 120 140 160 Q US gpm
0 20 40 60 80 100 120 140 Q IMP gpm
CP2E - CP2-GE
0 3 6 9 12 15 18 21 24 27 30 33 36 39 Q m3
/h
0
L
L1 L2
D DNA DNM
D1
D4
H1
H
A
B
D2
D3
MODEL A B B1 B2 C1 D D1 S1 D2 S2 D3 H H1 L L1 L2 M DNA DNM
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
CP2E 32-3600 IE3 355 270 130 125 180 80 100 14 90 19 140 730 90 320 165 155 10 32 32 680 430 1084 0,32 52,7
CP2E 32-4000 IE3 355 270 130 125 180 80 100 14 90 19 140 730 90 320 165 155 10 32 32 680 430 1084 0,32 52,7
CP2-GE 32-4800 IE3 355 270 129 120 180 80 100 14 90 19 140 884 90 320 165 155 10 32 32 680 430 1084 0,32 87,8
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
CP2E 32-3600 IE3
320 DN 32 PN 16
DN 32 PN 10 400 V
5,6 3 4 - 8,90
CP2E 32-4000 IE3 6,3 4 5,4 - 10,2
CP2-GE 32-4800 IE3 8,3 5,5 7,4 - 12,5
DAB PUMPS reserves the right to make modifications without notice
10
CP2E - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C up to140°C - Maximum operating pressure: 16 bar (1600 kPa)
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
0
H
m
0
40 4
8 80
12 120
16 160
20 200
24 240
P
kPa
0
20
40
60
80
H
ft
0
1000
2000
3000
W
0 Q m3 8 16 24 32 40 48 56 /h
0 Q m3 8 16 24 32 40 48 56 /h
Q US gpm
Q IMP gpm
0
0
40
40
80
80
120 160 200 240
120 160 200
0 200 400 600 800 1000 Q l/min
0 2 4 6 8 10 12 14 16 Q l/s
CP2E 40-2200 M
CP2E 40-1900 M
CP2E 40-1900 M
CP2E 40-2200 M
CP2E
L
L1 L2
D DNA DNM
D4
D3
B
A
D1
H1
C
C
H
M
D2
MODEL A B C D D1 D2 D3 D4 H H1 L L1 L2 M DNA DNM
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
CP2E 40-1900 IE5 533 256 180 89 100 110 150 19 463 95 320 168 152 10 40 40 600 300 640 0,12 42,5
CP2E 40-2200 IE5 533 271 180 89 100 110 150 19 463 95 320 168 152 10 40 40 600 300 640 0,12 42,5
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
CP2E 40-1900 IE5
320 DN 40 PN 16
230 V 2,00 1,5 2 8,90 -
CP2E 40-2200 IE5 400 V 3,30 2,2 3 - 5,30
DAB PUMPS reserves the right to make modifications without notice
11
CP2E, CP2-GE - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C to +140°C - Maximum operating pressure: 16 bar (1600 kPa)
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
CP2-GE 40-4000 T
CP2E 40-2800 T
CP2E 40-3300 T
CP2-GE 40-8200 T
CP2-GE 40-8200 T
CP2-GE 40-6600 T
CP2-GE 40-5000 T
CP2-GE 40-4000 T
CP2E 40-2800 T
CP2E 40-3300 T
CP2-GE 40-6600 T
CP2E - CP2-GE
CP2-GE 40-5000 T
0 Q m3 10 20 30 40 50 60 70 /h
0
10
20
30
40
50
60
70
80
90
H
m
0
100
200
300
400
500
600
700
800
900
P
kPa
0
50
100
150
200
250
300
H
ft
0 250 500 750 1000 1250 Q l/min
0 5 10 15 20 Q l/s
0 50 100 150 200 250 300 Q US gpm
0 50 100 150 200 250 Q IMP gpm
0
0 10 20 30 40 50 60 70 Q m³/h
4000
8000
12000
16000
W
L
L1 L2
D DNA DNM
D1
D4
H1
H
A
B
D2
D3
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
CP2E 40-2800 IE3
320
DN 40 PN 16 400
4,4 3 4 - 7,2
CP2E 40-3300 IE3 5,6 4 5,4 - 9,2
CP2-GE 40-4000 IE3 7,1 5,5 7,4 - 10,8
CP2-GE 40-5000 IE3
440
13,2 7,5 10,1 - 19,7
CP2-GE 40-6600 IE3 17,3 11 14,8 - 26,2
CP2-GE 40-8200 IE3 20,5 15 20,1 - 31,8
MODEL A B B1 B2 C1 D D1 S1 D2 S2 D3 H H1 L L1 L2 M DNA DNM
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
CP2E 40-2800 IE3 355 270 130,6 130,6 180 88 110 20 100 20 150 726 95 320 168 152 10 40 40 680 430 1084 0,32 48,9
CP2E 40-3300 IE3 355 270 130,6 130,6 180 88 110 20 100 20 150 726 95 320 168 152 10 40 40 680 430 1084 0,32 47,9
CP2-GE 40-4000 IE3 355 270 150 150 180 88 110 20 100 20 150 888,5 95 320 168 152 10 40 40 680 430 1084 0,32 82,6
CP2-GE 40-5000 IE3 440 360 180 180 250 88 110 20 100 20 150 965,5 99,5 440 220 220 10 40 40 708 588 1315 0,55 93
CP2-GE 40-6600 IE3 440 360 180 180 250 88 110 20 100 20 150 1088,5 99,5 440 220 220 10 40 40 708 588 1315 0,55 82,6
CP2-GE 40-8200 IE3 440 360 180 180 250 88 110 20 100 20 150 1088,5 99,5 440 220 220 10 40 40 708 588 1315 0,55 82,6
DAB PUMPS reserves the right to make modifications without notice
12
CP2E - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C to +140°C - Maximum operating pressure: 16 bar (1600 kPa)
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
0 Q m3 10 20 30 40 50 60 70 /h
0 Q m3 10 20 30 40 50 60 70 /h
0
H
m
0
40 4
8 80
12 120
16 160
20 200
24 240
P
kPa
0
20
40
60
80
H
ft
0
1000
2000
3000
W
0 250 500 750 1000 1250 Q l/min
0 5 10 15 20 Q l/s
0 50 100 150 200 250 300 Q US gpm
0 50 100 150 200 250 Q IMP gpm
CP2E 50-800 M
CP2E 50-1100 M
CP2E 50-1400 M
CP2E 50-1800 M
CP2E
CP2E 50-800 M
CP2E 50-1100 M
CP2E 50-1400 M
CP2E 50-1800 M
L
L1 L2
D DNA DNM
D4
D3
B
A
D1
H1
C
C
H
M
D2
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
CP2E 50-800 IE5
280 DN 50 PN 16
230 V
0,93 0,5 0,7 4,1 -
CP2E 50-1100 IE5 1,5 0,7 0,9 6,9 -
CP2E 50-1400 IE5 2,2 1,5 2 10,1 -
CP2E 50-1800 IE5 400 V 3 2,2 3 - 4,9
MODEL A B C D D1 D2 D3 D4 H H1 L L1 L2 M DNA DNM
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
CP2E 50-800 IE5 438 255 100 90 110 125 165 18 431 73 280 140 140 10 50 50 600 300 640 0,12 32
CP2E 50-1100 IE5 508 256 100 90 110 125 165 18 435 73 280 140 140 10 50 50 600 300 640 0,12 32
CP2E 50-1400 IE5 508 256 100 90 110 125 165 18 435 73 280 140 140 10 50 50 600 300 640 0,12 39
CP2E 50-1800 IE5 508 256 100 90 110 125 165 18 435 73 280 140 140 10 50 50 600 300 640 0,12 39
DAB PUMPS reserves the right to make modifications without notice
13
CP2E, CP2-GE - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C to +140°C - Maximum operating pressure: 16 bar (1600 kPa)
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
0 Q m3 10 20 30 40 50 60 70 /h
0
10
20
30
40
50
60
70
80
90
H
m
0
100
200
300
400
500
600
700
800
900
P
kPa
0
50
100
150
200
250
H
ft
0 250 500 750 1000 1250 Q l/min
0 5 10 15 20 Q l/s
0 50 100 150 200 250 300 Q US gpm
0 50 100 150 200 250 Q IMP gpm
0 Q m3 10 20 30 40 50 60 70 /h
0
5000
10000
15000
20000
W
3300 T
4400 T
5200 T
6600 T
2800 T
2100 T
CP2E - CP2-GE
CP2E 50-2100 T
CP2E 50-2800 T
CP2-GE 50-3300 T
CP2-GE 50-4400 T
CP2-GE 50-5200 T
CP2-GE 50-6600 T
L
L1 L2
D DNA DNM
D1
D4
H1
H
A
B
D2
D3
MODEL A B B1 B2 C1 D D1 S1 D2 S2 D3 DNA DNM H H1 L L1 L2 M
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
CP2E 50-2100 IE3 355 270 112,3 96 100 90 125 23,3 110 18 165 50 50 681,5 73 280 140 140 10 680 430 1084 0,32 49
CP2E 50-2800 IE3 355 270 136,4 131,2 180 100 125 21,8 110 14 165 50 50 755 105 340 172,5 167,5 10 680 430 1084 0,32 49
CP2-GE 50-3300 IE3 355 270 136,4 131,2 180 100 125 21,8 110 14 165 50 50 971,5 105 340 172,5 167,5 10 680 430 1084 0,32 78
CP2-GE 50-4400 IE3 430 340 136,4 131,2 180 100 125 21,8 110 14 165 50 50 971,5 105 340 172,5 167,5 10 708 588 1315 0,55 80
CP2-GE 50-5200 IE3 440 369 189 180 180 100 125 21,8 110 14 165 50 50 1116 128,4 440 220 220 10 708 588 1315 0,55 152
CP2-GE 50-6600 IE3 440 369 189 180 180 100 125 21,8 110 14 165 50 50 1116 128,4 440 220 220 10 708 588 1315 0,55 152
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
CP2E 50-2100 IE3 280
DN 50 PN 16 400 V
4,1 3 4 - 6,7
CP2E 50-2800 IE3
340
5,3 4 5,4 - 8,7
CP2-GE 50-3300 IE3 6,8 5,5 7,4 - 10,3
CP2-GE 50-4400 IE3 9,5 7,5 10,1 - 14,6
CP2-GE 50-5200 IE3
440
18 11 14,8 - 26,8
CP2-GE 50-6600 IE3 20,2 15 20,1 - 31,3
DAB PUMPS reserves the right to make modifications without notice
14
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
0
H
m
0
40 4
8 80
12 120
16 160
20 200
24 240
P
kPa
0
20
40
60
80
H
ft
0
750
1500
2250
W
0 Q m3 8 16 24 32 40 48 56 /h
0 Q m3 8 16 24 32 40 48 56 /h
Q US gpm
Q IMP gpm
0
0
40
40
80
80
120 160 200 240
120 160 200
0 200 400 600 800 1000 Q l/min
0 2 4 6 8 10 12 14 16 Q l/s
DCP2E 32-2200 M
DCP2E 32-2700 M
DCP2E 32-2100 M
DCP2E 32-1400 M
DCP2E 32-1800 M
DCP2E 32-2200 M
DCP2E
DCP2E 32-2100 M
DCP2E 32-1400 M
DCP2E 32-1400 M
DCP2E 32-1800 M
DCP2E - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C up to140°C - Maximum operating pressure: 16 bar (1600 kPa)
L
L1 L2
D DNA DNM
D4D3
B
A
D1
H1
C
C
H
D2
M
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
DCP2E 32-1400 IE5
260 DN 32 PN 16
DN 32 PN 10
230 V
0,93 0,7 0,9 5,1 -
DCP2E 32-1800 IE5 1,5 1,1 1,5 6,64 -
DCP2E 32-2100 IE5 1,13 0,7 0,9 5 -
DCP2E 32-2200 IE5 2 1,5 2 8,8 -
DCP2E 32-2700 IE5 320 400 V 3,4 2,2 2,3 - 5,3
MODEL A B C1 C2 D D1 D2 D3 D4 H H1 L L1 L2 M DNA DNM
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
DCP2E 32-1400 IE5 467 540 140 388 78 90 100 141 19 426 98 260 135 125 10 32 32 720 600 640 0,28 55
DCP2E 32-1800 IE5 467 540 140 388 78 90 100 141 19 426 98 260 135 125 10 32 32 720 600 640 0,28 55
DCP2E 32-2100 IE5 537 540 140 388 78 90 100 140 19 430 98 260 135 125 10 32 32 720 600 640 0,28 55
DCP2E 32-2200 IE5 537 540 140 388 78 90 100 140 19 430 98 260 135 125 10 32 32 720 600 640 0,28 77,5
DCP2E 32-2700 IE5 537 620 180 477 79 90 100 140 19 460 90 320 165 155 10 32 32 720 600 640 0,28 77,5
DAB PUMPS reserves the right to make modifications without notice
15
DCP2E, DCP2-GE - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C to +140°C - Maximum operating pressure: 16 bar (1600 kPa)
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
0
20
40
60
80
100
120
140
160
180
P
kPa
H
m H
ft
500
400
300
200
100
0 0
10
20
30
40
50
60
0 Q m3 8 16 24 32 40 48 56 /h
Q US gpm
Q IMP gpm
0
0
40
40
80
80
120 160 200 240
120 160 200
0 200 400 600 800 1000 Q l/min
0 2 4 6 8 10 12 14 16 Q l/s
0
0 Q m3 8 16 24 32 40 48 56 /h
1000
2000
3000
4000
5000
W
DCP2E 32-3600 T
DCP2E 32-4000 T
DCP2-GE 32-4800 T
DCP2E 32-3600 T
DCP2E 32-4000 T
DCP2-GE 32-4800 T
DCP2E - DCP2-GE
L
L1 L2
D DNA DNM
D4
D1
H1
H
A
B
D2
D3
MODEL A B D D1 D2 D3 D4 DNA DNM H H1 L L1 L2
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
DCP2E 32-3600 IE3 355 622 78 100 90 140 - 32 32 730 90 320 150 170 680 430 1084 0,32 52,7
DCP2E 32-4000 IE3 355 622 78 100 90 140 - 32 32 730 90 320 150 170 680 430 1084 0,32 52,7
DCP2-GE 32-4800 IE3 355 622 78 100 90 140 - 32 32 884 90 320 150 170 680 430 1084 0,32 87,8
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
DCP2E 32-3600 IE3
320 DN 32 PN 16
DN 32 PN 10 400 V
5,6 3 4 - 8,9
DCP2E 32-4000 IE3 6,3 4 5,4 - 10,2
DCP2-GE 32-4800 IE3 8,3 5,5 7,4 - 12,5
DAB PUMPS reserves the right to make modifications without notice
16
DCP2E - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C up to140°C - Maximum operating pressure: 16 bar (1600 kPa)
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
0 Q m3 10 20 30 40 50 60 70 /h
0 Q m3 10 20 30 40 50 60 70 /h
0
H
m
0
40 4
8 80
12 120
16 160
20 200
24 240
P
kPa
0
20
40
60
80
H
ft
0
1000
2000
3000
W
0 250 500 750 1000 1250 Q l/min
0 5 10 15 20 Q l/s
0 50 100 150 200 250 300 Q US gpm
0 50 100 150 200 250 Q IMP gpm
DCP2E
DCP2E 40-1900 M
DCP2E 40-2200 T
DCP2E 40-1900 M
DCP2E 40-2200 T
L
L1 L2
D DNA DNM
D4D3
B
A
D1
H1
C
C
H
D2
M
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
DCP2E 40-1900 IE5
320 DN 40 PN 16
230 V 2,00 1,5 2 8,9 -
DCP2E 40-2200 IE5 400 V 3,30 2,2 3 - 5,3
MODEL A B C1 C2 D D1 D2 D3 D4 H H1 L L1 L2 M DNA DNM
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
DCP2E 40-1900 IE5 533 620 180 478 89 100 110 150 19 463 95 320 168 152 10 40 40 720 600 640 0,28 80,5
DCP2E 40-2200 IE5 533 620 180 478 89 100 110 150 19 463 95 320 168 152 10 40 40 720 600 640 0,28 80,5
DAB PUMPS reserves the right to make modifications without notice
17
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
DCP2E, DCP2-GE - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C to +140°C - Maximum operating pressure: 16 bar (1600 kPa)
0 100 200 300 Q US gpm
0 100 200 300 Q IMP gpm
0 10 20 Q l/s
0 500 1000 1500 Q l/min
0
100
200
300
400
500
600
700
800
900
P
kPa
0
10
20
30
40
50
60
70
80
90
H
m
0 Q m3 20 40 60 80 /h
0
50
100
150
200
250
300
H
ft
Q m3 0 20 40 60 80 /h
0
4000
8000
12000
16000
W
DCP2-GE 40-8200 T
DCP2E - DCP2-GE
DCP2-GE 40-4000 T
DCP2E 40-3300 T
DCP2E 40-2800 T
DCP2-GE 40-5000 T
DCP2-GE 40-6600 T
DCP2-GE 40-8200 T
DCP2-GE 40-4000 T
DCP2E 40-3300 T
DCP2E 40-2800 T
DCP2-GE 40-5000 T
DCP2-GE 40-6600 T
L
L1 L2
D DNA DNM
D4
D1
H1
H
A
B
D2
D3
MODEL A B D D1 D2 D3 D4 DNA DNM H H1 L L1 L2
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
DCP2E 40-2800 IE3 355 622 88 110 100 150 - 40 40 726 95 320 170 150 680 430 1084 0,32 100,7
DCP2E 40-3300 IE3 355 622 88 110 100 150 - 40 40 726 95 320 170 150 680 430 1084 0,32 100,7
DCP2-GE 40-4000 IE3 355 622 88 110 100 150 - 40 40 888,5 95 320 170 150 970 848 1234 1,02 217,2
DCP2-GE 40-5000 IE3 430 770 88 110 100 150 - 40 40 965,5 99,5 440 240 200 970 848 1234 1,02 217,2
DCP2-GE 40-6600 IE3 430 770 88 110 100 150 - 40 40 1088,5 99,5 440 240 200 970 848 1234 1,02 303,2
DCP2-GE 40-8200 IE3 430 770 88 110 100 150 - 40 40 1088,5 99,5 440 240 200 970 848 1234 1,02 303,2
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
DCP2E 40-2800 IE3
320
DN 40 PN 16 400 V
4,4 3 4 - 7,2
DCP2E 40-3300 IE3 5,6 4 5,4 - 9,2
DCP2-GE 40-4000 IE3 7,1 5,5 7,4 - 10,8
DCP2-GE 40-5000 IE3
440
13,2 7,5 10,1 - 19,7
DCP2-GE 40-6600 IE3 17,3 11 14,8 - 26,2
DCP2-GE 40-8200 IE3 20,5 15 20,1 - 31,8
DAB PUMPS reserves the right to make modifications without notice
18
DCP2E - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C to +140°C - Maximum operating pressure: 16 bar (1600 kPa)
0 Q m3 10 20 30 40 50 60 70 /h
0 Q m3 10 20 30 40 50 60 70 /h
0
H
m
0
40 4
8 80
12 120
16 160
20 200
24 240
P
kPa
0
20
40
60
80
H
ft
0
1000
2000
3000
W
0 250 500 750 1000 1250 Q l/min
0 5 10 15 20 Q l/s
0 50 100 150 200 250 300 Q US gpm
0 50 100 150 200 250 Q IMP gpm
DCP2E
DCP2E 50-800 M
DCP2E 50-1100 M
DCP2E 50-1400 M
DCP2E 50-1800 T
DCP2E 50-1100 M
DCP2E 50-1400 M
DCP2E 50-1800 T
DCP2E 50-800 M
L
L1 L2
D DNA DNM
D4D3
B
A
D1
H1
C
C
H
D2
M
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
DCP2E 50-800 IE5
280 DN 50 PN 16
230 V
0,93 0,5 0,7 4,1 -
DCP2E 50-1100 IE5 1,5 0,7 0,9 6,9 -
DCP2E 50-1400 IE5 2,2 1,5 2 10,1 -
DCP2E 50-1800 IE5 400 V 3 2,2 3 - 4,9
MODEL A B C1 C2 D D1 D2 D3 D4 H H1 L L1 L2 M DNA DNM
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
DCP2E 50-800 IE5 438 555 100 392 90 110 125 165 18 431 73 280 140 140 10 50 50 720 600 640 0,28 54
DCP2E 50-1100 IE5 508 555 100 392 90 110 125 165 18 435 73 280 140 140 10 50 50 720 600 640 0,28 54
DCP2E 50-1400 IE5 508 555 100 392 90 110 125 165 18 435 73 280 140 140 10 50 50 720 600 640 0,28 68
DCP2E 50-1800 IE5 508 555 100 392 90 110 125 165 18 435 73 280 140 140 10 50 50 720 600 640 0,28 68
DAB PUMPS reserves the right to make modifications without notice
19
DCP2E, DCP2-GE - ELECTRONIC IN-LINE PUMPS
Liquid temperature range: from -15°C to +140°C - Maximum operating pressure: 16 bar (1600 kPa)
0 20 40 60 80 100 120 140 Q m3
/h
0
10
20
30
40
50
60
70
80
90
H
m
0
100
200
300
400
500
600
700
800
900
P
kPa
0
50
100
150
200
250
300
H
ft
0
0 20 40 60 80 100 120 140 Q m3
/h
2500
5000
7500
10000
12500
15000
W
0 500
0 10
1000 1500 2000 2500
20 30
Q l/min
40 Q l/s
0
0
100 200 300 400 500 600
100 200 300 400 500
Q US gpm
Q IMP gpm
DCP2-GE 50-6600 T
DCP2-GE 50-5200 T
DCP2-GE 50-3300 T
DCP2-GE 50-4400 T
DCP2E 50-2800 T
DCP2E 50-2100 T
DCP2E - DCP2-GE
DCP2-GE 50-6600 T
DCP2-GE 50-5200 T
DCP2-GE 50-4400 T
DCP2-GE 50-3300 T
DCP2E 50-2800 T
DCP2E 50-2100 T
The performance curves are based on kinematic viscosity values =
1 mm2/s and density equal to 1000 kg/m3. Curve tolerance according to ISO 9906.
L
L1 L2
D DNA DNM
D4
D1
H1
H
A
B
D2
D3
MODELLO A B D D1 D2 D3 D4 DNA DNM H H1 L L1 L2
PACKING DIMENSIONS VOLUME
(mc)
WEIGHT
Kg L/A L/B H
DCP2E 50-2100 IE3 355 570 90 125 110 165 - 50 50 682 73 280 133 147 680 430 1084 0,32 49
DCP2E 50-2800 IE3 355 730 100 125 110 165 - 50 50 755 105 340 190 150 680 430 1084 0,32 49
DCP2-GE 50-3300 IE3 355 730 100 125 110 165 - 50 50 971,5 105 340 190 150 680 430 1084 0,32 78
DCP2-GE 50-4400 IE3 430 860 100 125 110 165 - 50 50 971,5 105 340 190 150 708 588 1315 0,55 80
DCP2-GE 50-5200 IE3 440 869 100 125 110 165 - 50 50 1116 128,4 440 230 210 708 588 1315 0,55 152
DCP2-GE 50-6600 IE3 440 869 100 125 110 165 - 50 50 1116 128,4 440 230 210 708 588 1315 0,55 152
MODEL
ELECTRICAL DATA
CENTRE DISTANCE PUMP CONNECTIONS POWER INPUT
50 HZ
P1 MAX
[kW]
P2 NOMINAL In [A]
kW HP 230 V 400 V
DCP2E 50-2100 IE3 280
DN 50 PN 16 400 V
4,1 3 4 - 6,7
DCP2E 50-2800 IE3
340
5,3 4 5,4 - 8,7
DCP2-GE 50-3300 IE3 6,8 5,5 7,4 - 10,3
DCP2-GE 50-4400 IE3 9,5 7,5 10,1 - 14,6
DCP2-GE 50-5200 IE3
440
18 11 14,8 - 26,8
DCP2-GE 50-6600 IE3 20,2 15 20,1 - 31,3
DAB PUMPS reserves the right to make modifications without notice
20
H2D DIGITAL SERVICE
THE SMART PLATFORM FOR MANAGING DAB DEVICES REMOTELY
H2D FOR PROFESSIONALS
H2
D simplifies and streamlines work routines, allowing for precise configuration of all parameters.
H2D IS THE DAB PLATFORM - AVAILABLE ON MOBILE AND DESKTOP - THAT PAIRS WITH LATEST-GENERATION DAB
DEVICES TO SHOW YOU WHAT’S GOING ON INSIDE YOUR SYSTEMS.
It allows you to configure your pump and optimise its operation remotely, saving time, resources and money.
Ideal for anyone seeking to future-proof their business with solutions designed to improve processes, offer more service, and be environmentally responsible.
SEE THE FUTURE OF YOUR BUSINESS THROUGH A NEW LENS
Desktop and mobile solutions work together seamlessly. With user-friendly access on your smartphone,
it’s never been easier to communicate with pumps on site or keep an eye on your systems from anywhere. From your desktop, you can dive deeper into data analysis. You can easily enhance workflow,
improve customer service, and grow your business.
OPTIMISE TIME AND WORK
H2
D allows systems to be controlled remotely and, where
needed, work on site is easier to plan.
PROBLEM FIXED FIRST TIME, EVERY TIME
H2
D provides all the info you need to prepare the job beforehand for a quick and permanent fix, so the technician can get
everything done in one go.
LITTLE OR NO DISRUPTION
Remote monitoring allows you to address potential issues and
prevent disruptions.
MORE SERVICE AND LESS URGENT CALLOUTS
= INCREASED PROFIT
With remote monitoring, we offer a 24/7 service that includes
preventive maintenance services, helping to avoid emergencies.
SATISFIED CUSTOMERS
With parameters optimised remotely, the system ensures consistently smooth operation.
FROM DCONNECT TO H2
D
H2
D replaces and improves on DConnect. Latest generation
DAB products connect effortlessly to H2
D.
DAB PUMPS reserves the right to make modifications without notice
21
50240050 - 03/2026
H2D DIGITAL SERVICE
THE SMART PLATFORM FOR MANAGING DAB DEVICES REMOTELY
H2D FOR HOMEOWNERS AND END USERS
H2
D is a tool designed to help you manage water use effectively, optimising consumption, costs, and comfort.
COMFORT FUNCTIONS
You can access these functions through an app, allowing you to customise the system’s performance and features to balance comfort and energy consumption.
POWER SHOWER
Turn a regular shower into a “power shower”: this feature
increases water pressure just for the time it takes to shower,
while reducing usage for the rest of the day.
GOOD NIGHT
During the night or for a quick nap, you can activate sleep
mode, which switches the already quiet pump to a whisperquiet operation, further reducing energy usage.
HOLIDAY MOOD (Only for Esybox Pop)
This important feature helps minimise device activity, thereby
saving energy during vacations or extended periods when you
are away.
OVERVIEW
With H2
D monitoring your water usage and device status in real-time is easy and convenient. If any issues arise, you can contact support
immediately, regardless of your location.
SMART HOME. TALK TO YOUR ESYBOX!
You can activate comfort modes by speaking to voice assistants like Alexa and Google Home. For example, you can say, “Alexa, activate Power
Shower.”
INSTALL H2
D NOW! LEARN MORE
H2D.COM/EN HOW TO USE H2
D
