CAT No.007002G NOV. 2012 7FS

SALES OFFICES

MINEBEA Co., Ltd.

Head Office : 4106-73 Oaza Miyota, Miyota-machi,

Kitasaku-gun, Nagano, 389-0293 Japan

http://www.minebea.co.jp/

Tel

Fax

:

:

81-267-32-2200

81-267-31-1330

Measuring Components Business Unit

Head Quarter : 1-1-1 Katase, Fujisawa,

Kanagawa, 251-8531 Japan

http://www.minebea-mcd.com/en/

Tel

Fax

:

:

81-466-22-7151

81-466-22-1701

■Singapore

NMB Singapore Ltd.

1, Chai Chee Avenue, Singapore 469059

TEL:65-6241-1033 / FAX:65-6444-6527

■China

< Hong Kong >

Minebea (Hong Kong) Ltd.

Room 2110, 21st Floor, Tower 6, The Gateway,

No.9 Canton Road, Tsim Sha Tsui, Kowloon,

Hong Kong S.A.R of China

TEL : 852-2730-9913 / FAX : 852-2735-4535

< Shanghai >

Minebea Trading (Shanghai) Ltd.

1010, Huaihai Zhong Road, Room 3303, K.Wah Centre,

Huangpu District, Shanghai, 200031, China

TEL : 86-21-5405-0707 / FAX : 86-21-5404-7007

< Shenzhen >

Minebea (Shenzhen) Ltd. Luohu Branch

23/F, Tower B, Kingkey 100, No.5016 Shennan Road East,

Luohu District, Shenzhen 518008, China

TEL : 86-755-8266-8846 / FAX : 86-755-8266-8843~8844

< Taiwan Area >

Minebea Technologies Taiwan Co., Ltd. Taipei Branch

8F, 28 Ching-Cheng Street. Taipei, Taiwan 105, China

(Tong Tai Business Building)

TEL : 886-2-2718-2363 / FAX : 886-2-2718-4092

■Malaysia

Minebea Co., Ltd., Kuala Lumpur Branch

E407, 4th Floor, East Tower Wisma Consplant 1, No. 2, Jalan SS

16/4, 47500 Subang Jaya Selangor Darul Ehsan, Malaysia

TEL : 60-3-5631-7849~52 / FAX : 60-3-5631-7844

■Republic of Korea

NMB Korea Co., Ltd.

7F. JEI Bldg, 253-1, Seohyeon-Dong, Bundang-Gu,

Seongnam-Si , Gyeonggi-Do, 463-824 Korea

TEL：82-2-557-4467 / FAX：82-2-557-4478

URL: http://www.nmbkorea.co.kr/

■Thailand

NMB-Minebea Thai Ltd., Bangkok Office

19th Floor, Wave Place Building, 55 Wireless Road,

Lumpinee Pathumwan, Bangkok, 10330 Thailand

TEL : 66-2-253-4897 / FAX : 66-2-255-2875 / 66-2-253-4537

URL: http://www.minebea.co.th/

■India

NMB-Minebea Thai Ltd. Chennai Office

Level-2 Regus, ALTIUS Block, Olympia Technology Park

No:01, SIDCO Industrial Estate Guindy, Chennai 600032, India

TEL：91-44-4299-4215 / FAX：91-44-4299-4300

■Germany

NMB-Minebea-GmbH

Siemens Str. 30, D-63225 Langen, Germany

TEL: 49-6103-913-0 / FAX: 49-6103-913-220

URL: http://www.nmb-minebea.de/

SALES REPRESENTATIVES

■U.S.A.

RdF Corporation

23 Elm Ave. Hudson, NH 03051, U.S.A.

TEL : 1-603-882-5195 / FAX : 1-603-882-6925

URL: http://www.rdfcorp.com/

■United Kingdom

StrainSense Limited

The Old Barn, Woods Lane, Potterspury, Northants. NN12 7PT, U.K.

TEL : 44-1908-543038 / FAX : 44-8700-940810

URL: http://www.strainsense.co.uk/

■Italy

Pavone Sistemi S.r.l.

Via dei Chiosi, 18, 20040 Cavenago Brianza (MI) Italy

TEL : 39-2-95-339-165 / FAX : 39-2-95-01-252

URL: http://www.pavonesistemi.it/

■U.S.A.

NMB Technologies Corporation

9730 Independence Avenue, Chatsworth,

California 91311, U.S.A.

TEL：1-818-341-3355 / FAX：1-818-341-8207

URL: http://www.nmbtc.com/

■France

NMB Minebea S.a.r.l.

5, Avenue des Bosquets, Les Ponts de Baillet,

95560, Baillet en France, France

TEL: 33-1-34083939 / FAX: 33-1-34083930

URL: http://www.nmb-minebea.fr/

MINEBEA Co., Ltd.

Measuring Components Business Unit

Sensors, Components and Instruments

Product Guide

MINEBEA Co., Ltd.

Measuring Components Business Unit

Sensors, Components and Instruments

Product Guide

URL. http://www.minebea-mcd.com

沈阳瑞思达轴承有限公司SHENYANG TOTAL BEARING CO.,LTD.

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249

Mobile: 13940483518 15640413155（微信）

Web: https://www.rstbearing.com.cn

1

Index

Introduction to Measuring Components Business Unit

Guidance of new released products

Application Guide

Load Cells

Mounting attachments with slide stop mechanism

Pressure sensors

Torque transducers

Measuring Instrumentations

Transmitters

Strain Meters

Tensile and Compression Testing Machines

Tie Bar Gage Measuring System

Strain gages

1

2 ~ 3

4 ~ 5

6 ~ 23

24

25 ~ 28

29

30 ~ 37

38

39

40 ~ 42

43

44 ~ 45

Conversion table

This catalog contains information about existing products of Measuring

Components Business Unit (MCBU) of Minebea as of May, 2012.

●

Specifications of products listed in this catalog are subject to change without

notice to allow for continuous improvement.

●

Proper use of products is described in the instruction manual. Minebea shall not

be responsible for improper use or application of its products. Minebea shall not

be responsible for any damage to its products due to improper use or handling.

●

Do not adjoin the communication cable between the measuring instrumentations

with a power supply cable. etc. It may cause a malfunction and defective

performance.

●

● When selecting products from an old catalog, please consult Minebea.

When application requires combining products from this catalog with older

products of Minebea, consult Minebea to ensure proper connecting instructions.

●

To prevent damage, avoid subjecting products to excessive shock due to

vibration acceleration or dropping as well as any rapid change in

environmental pressure and temperature.

●

SI unit

Name of unit Symbol of unit

N

1

1×10 - 5

9.806 65

N･m

1

9.806 65

Pa

1

1 000

1×106

9.806 65×104

1.013 25×105

m/s2

1

9.806 65

MPa

1×10 - 6

1×10 - 3

1

9.806 65×10 - 2

1.013 25×10 - 1

MKS unit

kgf

1.019 72×10 - 1 1×105

1.019 72×10 - 6 1

1 9.806 65×105

kgf･m

1.019 72×10 - 1

1

kgf/cm2 atm

1.019 72×10 - 5

1.019 72×10 - 2

1.019 72×10

1

1.033 23

G

1.019 72×10 - 1

1

9.869 23×10 - 6

9.869 23×10 - 3

9.869 23

9.674 41×10 - 1

1

dyn

Mass

Load

Pressure

and Stress

Acceleration

Torque or

Force Morment

Newton

Newton・Meter

Pascal or

Newton per square meter

Meter per

square second

http://www.minebea-mcd.com

45

Gage patern Parts No.

F-02W-12T11W03

F-02W-12T11W3

F-05W-12T11W03

F-05W-12T11W3

F-1S-12MT11W03

F-1S-12MT11W1

F-1S-12MT11W3

F-1S-12MT11W5

F-2-12T11W03

F-2-12T11W1

F-2-12T11W3

F-2-12T11W5

F-3N-12T11W03

F-3N-12T11W1

F-3N-12T11W3

F-3N-12T11W5

F-4-12T11W03

F-4-12T11W3

F-5N-12T11W03

F-5N-12T11W3

F-5N-12T11W5

F-8-12T11W03

F-8-12T11W3

FX-2-12T11W03

FX-2-12T11W1

FX-2-12T11W3

FX-2-12T11W5

FX-5-12T11W03

FX-5-12T11W1

FX-5-12T11W3

FX-5-12T11W5

FR-2-12T11W03

FR-2-12T11W1

FR-2-12T11W3

FR-2-12T11W5

FR-5-12T11W03

FR-5-12T11W1

FR-5-12T11W3

FR-5-12T11W5

F-02W-12T11W3-3

F-02W-12T11W5-3

F-02W-12T11W10-3

F-1S-12T11W3-3

F-1S-12T11W5-3

F-1S-12T11W10-3

F-2-12T11W3-3

F-2-12T11W5-3

F-2-12T11W10-3

F-5N-12T11W3-3

F-5N-12T11W5-3

F-5N-12T11W10-3

FX-2-12T11W3-3

FX-2-12T11W5-3

FX-2-12T11W10-3

FX-5-12T11W3-3

FX-5-12T11W5-3

FX-5-12T11W10-3

FR-2-12T11W3-3

FR-2-12T11W5-3

FR-2-12T11W10-3

FR-5-12T11W3-3

FR-5-12T11W5-3

FR-5-12T11W10-3

Length

0.2

0.5

1.0

2.0

3.0

4.0

5.0

8.0

2.0

5.0

2.0

5.0

0.2

1.0

2.0

5.0

2.0

5.0

2.0

5.0

Base size

2.7 x 2.2

3.0 x 2.5

5.2 x 2.5

6.7 x 3.0

9.0 x 3.5

8.2 x 3.5

10.2 x 3.0

14.5 x 6.0

F8.0

F12.0

F8.0

F12.0

2.7 x 2.2

3.6 x 2.7

6.7 x 3.0

10.2 x 3.0

F8.0

F12.0

F8.0

F12.0

Patern Size

1.3 x 1.0

1.3 x 1.4

2.6 x 1.4

4.3 x 1.9

6.0 x 1.8

5.6 x 2.0

7.6 x 1.8

11.1 x 3.1

4.1 x 1.4

8.0 x 2.5

4.1 x 1.4

8.0 x 2.5

1.3 x 1.0

2.2 x 1.0

4.3 x 1.9

7.6 x 1.8

4.1 x 1.4

8.0 x 2.5

4.1 x 1.4

8.0 x 2.5

Patern No.

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

31

F-02W-12T11W03

F-02W-12T11W3

32 33

F-05W-12T11W03

F-05W-12T11W3

F-1S-12MT11W03

F-1S-12MT11W1

F-1S-12MT11W3

F-1S-12MT11W5

34

F-2-12T11W03

F-2-12T11W1

F-2-12T11W3

F-2-12T11W5

35

F-3N-12T11W03

F-3N-12T11W1

F-3N-12T11W3

F-3N-12T11W5

36

F-4-12T11W03

F-4-12T11W3

37

F-5N-12T11W03

F-5N-12T11W3

F-5N-12T11W5

38

F-8-12T11W03

F-8-12T11W3

41

FR-2-12T11W03

FR-2-12T11W1

FR-2-12T11W3

FR-2-12T11W5

42

FR-5-12T11W03

FR-5-12T11W1

FR-5-12T11W3

FR-5-12T11W5

39 40

FX-2-12T11W03

FX-2-12T11W1

FX-2-12T11W3

FX-2-12T11W5

FX-5-12T11W03

FX-5-12T11W1

FX-5-12T11W3

FX-5-12T11W5

43

F-02W-12T11W3-3

F-02W-12T11W5-3

F-02W-12T11W10-3

44

F-1S-12T11W3-3

F-1S-12T11W5-3

F-1S-12T11W10-3

45

F-2-12T11W3-3

F-2-12T11W5-3

F-2-12T11W10-3

46

F-5N-12T11W3-3

F-5N-12T11W5-3

F-5N-12T11W10-3

49 50

FR-2-12T11W3-3

FR-2-12T11W5-3

FR-2-12T11W10-3

FR-5-12T11W3-3

FR-5-12T11W5-3

FR-5-12T11W10-3

47 48

FX-2-12T11W3-3

FX-2-12T11W5-3

FX-2-12T11W10-3

FX-5-12T11W3-3

FX-5-12T11W5-3

FX-5-12T11W10-3

F-series Epoxy Foil Gage

Strain Gages

http://www.minebea-mcd.com

1

Introduction to Measuring Components Business Unit

Profile of Minebea Co., Ltd.

As we approach the beginning of 21st Century, we are preparing for our next stage of development and growth. At Measuring

Components Business Unit (MCBU) of Minebea Co., Ltd, it is our goal to develop the finest products in performance and reliability. We

aim to meet and exceed the existing requirements of the measuring components markets throughout the world.

For over 60 years, the Measuring Components Business Unit has been fulfilling the needs of its customers in numerous industries by

supplying transducers based on most up-to-date strain gage technology, as well as specialized measurement instrumentation.

Our products are manufactured at vertically integrated facilities in Japan, Thailand and China. This permits us to meet the demanding

standards that have long been pursued by Minebea to maintain the highest quality levels. We are able to structure our pricing

according to our high volume manufacturing, and can therefore furnish the most competitive prices by passing our lower costs on to our

customers worldwide.

In conjuntion with its application engineering and software procedures, MCBU shall continue to research and develop its products to

meet the stringent requirements in the field. In this way, MCBU will assure the highest degree of measurement accuracy and provide

solutions to fulfill the needs of its customers.

Based upon its high level of product quality and technical expertise, the Measuring Components Business Unit is well positioned to

provide measurement solutions well into the 21st Century.

Date of Establishment

Capital

Representatives

Number of Employee

July 16, 1951

68,258 million yen (As of March, 2011)

Mr. Yoshihisa Kainuma, Representative Director, President and Chief Executive Officer

Consolidated : 53,827 persons, Non consolidated : 2,844 persons (As of March, 2011)

Profile of Measuring Components Business Unit

Developement of Measuring Components Business Unit

1941

1950

1975

1991

1996

2000

2001

2002

2003

2005

2006

2007

Shinkoh Tsushin Seisakusho was established as a partnership company at 1103, Zushi,

Zushi-shi, Kanagawa-ken, Japan

The Company was incorporated into Shinkoh Tsushin Kogyo Co., Ltd. as a joint stock company.

A technical and marketing partnership was concluded with BLH Electronics, Inc., one of the

manufacturers of strain measurement and applied equipment in U.S.A.

Technical partnership was concluded with SENSOTRON Inc., a subsidiary of Powerec

International Inc., a powerful USA maker of a pressure transmittor.

ISO 9001 qualification was approved. (Karuizawa factory / Fujisawa factory in Japan)

ISO 9002 qualification was approved. (Singapore factory / Thai factory)

ISO 14001 qualification was approved. (All MINEBEA factory)

Mass-production of sensors for key board and health meter, etc., have been mainly developed

to become a total measuring instrument manufacturer.

Operation at Singapore was closed, and the Shanghai factory in China was started.

Started mass production of sensors for automobile applications.

Operation at the Lop Buri factory in Thailand was started to increase sensor production for

automobile applications.

Started the sales of 6-axis force sensors.

Started production of PSA (Pointing Stick A’ssy).

Started production of sensors for game consoles.

■

■

■

■

■

■

■

■

■

■

■

■

■

■

Fujisawa Plant / Japan

:

:

:

:

Division Manager

Domestic Plant

Karuizawa Plant

Fujisawa Plant

Overseas Plant

NMB-Minebea Thai LTd.

Minebea Electronics & Hi-Tech Components (Shanghai) Ltd.

Hideo Asakawa,

Head of Measuring Components Business Unit

4106-73 Oaza Miyota, Miyota-machi, Kitasaku-gun, Nagano 389-0293, Japan

tel : 81-267-31-1309 / fax : 81-267-31-1353

1-1-1, Katase, Fujisawa, Kanagawa 251-8531, Japan

tel : 81-466-22-7151 / fax : 81-466-22-1701

5/2 Moo 8, Phaholyothin Road, Km. 149, Tambol Nikom Sang Ton-Eng,

Amphoe Muang, Lop Buri Province, 15000 Thailand

tel : 66-36-413-811 / fax : 66-36-413-950

No.5202, Lian Xi Road, Jinze Town, Qingpu District, Shanghai 201721, China

tel : 86-21-5929-3680 / fax : 86-21-5929-3697

:

:

:

:

:

Karuizawa Plant / Japan

Lop Buri Plant / Thailand

Shanghai Plant / China

沈阳瑞思达轴承有限公司SHENYANG TOTAL BEARING CO.,LTD.

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249

Mobile: 13940483518 15640413155（微信）

Web: https://www.rstbearing.com.cn

2

http://www.minebea-mcd.com http://www.minebea-mcd.com

3

New Products

Double convex canister type load cell

Check rod method Flexible stop method

Load cell for weighing systems CC010 series

Mounting attachment with slide stop mechanism for CC010

★

★

★

★

Equipped with lift-off protection fittings.

All stainless steel structure.

(Selectable alloy steel structure )

Expansion capability in all directions.

Japanese patent No.4422099

★

★

★

Equipped with lift-off protection fittings.

All stainless steel structure

(Selectable alloy steel structure )

Most suitable for the tank where the

vibration such as the pugmill is

generated.

CCACC010 series FCACC010 series

As equipped with auto alignment function, ideal for applying on

hoppers, tank scales and weighing systems.

High accuracy and High reliability

(OIML-D1 class or equivalent : Non-linearity + Hysteresis + Repeatability = 0.04 %R.O.)

Hermetically sealed stainless steel construction providing

excellent protection in a hazardous environment.

Same height and diameter for all capacities.

★

★

★

★

< CC010-500K~1T > < CC010-2T~3T > < CC010-5T~30T > < CC010-50T >

Achieve 1,000,000 count digital output without the data loss

Digital Load Cell DC002 Series / Digital Indicator CSD-401

Digital Indicator

CSD-401

Summing Type

Junction Box

DB-307

Up to (8) load cells

are connectable.

DC002 series

★ Excellent noise tolerance - An amount of the lightning surge is increased by the internal measures parts.

Improvement of maintenance efficiency

The calibration function of four corner adjustment, etc., is simplified by the use of a special

indicator (CSD-401).

★

★ Decrease the error factor with the use of an amplifier.

Temperature error is compensated by measuring the temperature at gage section with the internal

temperature detecting part.

★

★ High precision measurement can be performed by the excellent temperature compensation.

★ CE mark applicable. (DC002 series)

Adopted Silicon-On-Sapphire Technology

Compact Size, High Accurate Pressure Sensor

SOS Type Pressure Sensor NS30T Series

★ Available for compound pressure measurement (-100 kPa to each rated capacity)

★ Compact size and Light weight φ16 mm x approx.43 mm, Weight approx.50 g

Compensated temperature range : - 20 ℃ ~ 120 ℃

Safe temperature range : - 45 ℃ ~ 160 ℃

* Even if the environmental temperature exceeds the compensated temperature range, accuracy is

guaranteed to the safe temperature range.

★

★ High speed response (Natural frequency : 72 kHz ~ 556 kHz / 200 kPa ~ 10 MPa)

★ Applicable for low level pressure measurement (0 ~ 200 kPa, 0 ~ 500 kPa)

★ Accuracy 0.2 %R.O. (High accurate type : 0.1 %R.O.) (Including non-linearity, hysteresis and repeatability)

Application example

Automobile experimental use (Automatic transmission, Engine intake port),

Solenoid valve testing system, Aircraft oil pressure testing system,

Osmotic pressure measurement, Vapour pressure measurement, Leak tester

★

(Mounting attachment is an option)

Auto alignment function is the mechanism which keeps the balance

of the tank scale and hopper against the rolling.

*

Applicable to all around weighing system from an advanced

sequential control to a simple platform scale, etc.

High performance and Palmtop size Digital Conversion Module

Fit and Smart model in FA systems.

New standard model consolidated

measurement know-how of Minebea.

Graphic Digital Indicator CSD-912

Adopted 6.2 inches color liquid crystal touch panel display with excellent

visibility STN color and wide viewing angle.

★

★ Waveform display of weighing status.

Adopted the visible 7 segment design with 22 mm height character to the

load display section.

★

★ Correspond to DC12 V excitation for load cell.

★ Wide range power supply voltage (AC100 V ~ AC240 V)

★ Stored 100 kinds of mixing measurement in the internal brand memory.

Correspond to many kind of field bus, \"CC-Link\", \"Profibus\" enable to

connect PLC directly, available simple construction for advanced and

complicate measurement system.

★

Equipped with substantial measurment sequence adaptable in a various

mesurement system.

Available sequential control without connecting PLC etc. at outside.

★

★ High speed A/D conversion at 1 000 times/s. (Internal resolution : 24 bits)

★ CE mark applicable.

New Products

Digital Indicator CSD-903

Plentiful of weighing system

･ High performance sequential mode, ･ Flexible simple comparison mode, ･ Two part of comparator mode

★

Active display

･ Good visible main display, ･ Various kinds of sub-display, ･ Plentiful of status display

★

★ Correspond to DC12 V excitation for load cell.

★ Light weight and compact size ... WHD : 144 × 72 × 136.5 mm, Weight : Approx.1.0 kg

★ Communication tool ... Support the parameter set connecting with PC.

★ CE mark applicable

Correspond to dustproof and waterproof

Protection grade is IP65 when the attached panel mount gasket is installed.

★

High speed sampling

Flow and discharge can control in good accuracy by high speed A/D conversion at 200 times/s.

★

★ World wide power supply ... AC100 V ~ 240 V.

Various interface

Standard

Option

★

: 2-wires method serial interface, RS-485 (Corresponding to Modbus)

: Voltage output, Current output, BCD output, RS-422/485、RS-232C、CC-Link

Digital Conversion Module CSD-892-73

Best for High speed / High resolution application

･ 500 times/s of A/D sampling speed and comparator output rate. Suitable for the high speed application,

such as an automatic measurement machine, filling machine, etc. Input sensitivity is 0.15 μV/d.

★

Various convinient capability

･ Simple calibration

Equipped with a short-cut key for the setting related to ZERO, SPAN and the other calibrations.

Therefore, the easy calibration is achieved.

･ Various filters

Equipped with three filters corresponding to the various responses. Therefore, the stable measurement

can be possible under the environment with a lot of vibrations.

･ F key function

Selectable one from Zero set, Zero clear, Tare weight cancellation, Tare weight cancellation clear, Hold,

Change display of Gross and Net or Confirmation of station number for CC-Link interface.

･ Convenient monitoring function

The confirmation of load cell output voltage (mV/V) is convenient to divide the cause when the trouble occurs.

★

Easy installation and palmtop size ... Weight : Approx. 260 g, (W×H×D) 72 × 96 × 67.4 mm

Applicable to the rail type mounting for 35mm width of DIN standard. Achieved the lightening and minimizing.

★

★ The system is constructed with CC-Link interface easily.

★ Communication tool ... Support the parameter set connecting with PC.

★ The PC that installs EzCTS(Option) and connects with USB interface.

4

http://www.minebea-mcd.com http://www.minebea-mcd.com

5

Hopper and tank scale

Application

Truck scale

Load cell

Feeder System

Control mechanism

Load cell

Supply

hopper

Screw

Feeder

Weighing conveyor

Quantitative supply

M

M

Tension Measurement

Roller

Load cell

Load cell

Tenssion force

Load Cell

(Compression service)

CCP1(A) series CC010 series

C3B1-NS series C2B1B series

Load Cell

(Tension service)

U3S1-NS series T3B1 series

Load cell for truck scale

CC002-NS series

C2G1-A series

Beam type load cell

CBE1(-U) series

C3B1-NS series

CCR1(B) series

Load cell

(Compression service)

CMM1 series

C3B1-NS series

Transducers Junction Box Instrumentations

Analog Transmitter

B-307

Summing type junction box

DB-307

Summing type junction box

for digital load cell

SB-310

Summing type junction box

SB-320

Summing type junction box

(Stainless steel structure)

B-304B

Summing type junction box

CSD-891B

Digital Indicator

TMD-100 CSD-904

CSD-903

CSD-912

CSD-581-15/74

CSD-815B

CSD-701B

CSA-507C

CSD-814B

CSA-503C

Digital Indicator

Applications for various type sensors, amplifiers and indicators

CSD-892-73

Packer scale

Main

Hopper

Weighing

Hopper

Load Cell Load Cell

Drip gate

Load cell

Load cell

(Tension service)

Load cell Weighing (Tension service) tank

Bag filling shot

** Various model recognition of intrinsically safe construction and flame-proof construction in preparation for the case measured in atmosphere with

the explosion hazard is required. Please consult us separately.

Pressure measurement

Platform Scale

Pressure transmitter

CB14 series

C2G1-A series BCL-A series

CSA-522B

CSD-815B

CSD-701B

CSD-814B

CSD-819C

TMOS series CSA-562B

TMOFB series

TMHFB series TMNR series CSA-561

NS100A series

NS115P series PRN series

LSM-B series

CMM1 series

C2D1 series

UWV1 series

C1W1M series

Load Cell

(Compression service)

Load Cell

(Compression service)

Load Cell for Scale

Current Output 4 mA ~ 20 mA

Voltage output 0 V ~ 5 V,

0 V ~ 10 V

Optical transmission method Rotary transformer method

Applications for various type sensors, amplifiers and indicators

Torque measurement

Injection molding machine

Press load measurement

Pressure transmitter

Application Transducers Junction Box Instrumentations

Analog Transmitter

CSA-503C

CSA-507C

Digital Indicator

B-307

Summing type junction box

SB-310

Summing type junction box

SB-320

Summing type junction box

(Strainless steel structure)

B-304B

Summing type junction box

Load cell

Load cell

Load cell Load cell

Liquid

Coupling Coupling

TMNR/ME series torque transducer

Engine

Dynamometer

Load cell

Screen

Die

Motor Screw mechanism

Feeder Motor

Hopper

Torque Transducer Torque Transducer

6

http://www.minebea-mcd.com http://www.minebea-mcd.com

6 7

294.2

kN

30

tf

2.942

kN

300

kgf

9.807

kN

1

tf

●

4.903

N

500

gf

9.807

N

1

kgf

19.61

N

2

kgf

49.03

N

5

kgf

98.07

N

10

kgf

196.1

N

20

kgf

490.3

N

50

kgf

980.7

N

100

kgf

1.961

kN

200

kgf

78.45 kN

{8 tf}

●

●

●

●

●

●

●

●

●

●

●

● ● ●

●

●

●

●

●

●

CCP1(A)

CC010

CMM1

CMP1

CWV1

C1W1M-S01

TCP1(A)

T3B1

CLS-A

C3B1-NS

C2B1B

CBE1(-U)

U3B1-B

U3S1-NS

UMM1

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Rated capacity

88.26 kN

{9 tf}

Model No.

2.942

N

300

gf

5.884

N

600

gf

9.807

N

1

kgf

19.61

N

2

kgf

29.42

N

3

kgf

58.84

N

6

kgf

98.07

N

10

kgf

147.1

N

15

kgf

196.1

N

20

kgf

245.2

N

25

kgf

294.2

N

30

kgf

343.3

N

35

kgf

490.3

N

50

kgf

588.4

N

60

kgf

980.7

N

100

kgf

2.942

kN

300

kgf

4.903

kN

500

kgf

5.884

kN

600

kgf

● ● ● ●

●

●

●

●

●

19

19

20

20

21

21

22

23

23

23

23

23

Rated Capacity

19.61

mN

2

gf

●

98.07

mN

10

gf

●

196.1

mN

20

gf

●

490.3

mN

50

gf

18 ●

18

980.7

mN

100

gf

●

●

1.961

N

200

gf

●

4.903

N

500

gf

●

9.807

N

1

kgf

●

19.61

N

2

kgf

●

Rated Capacity

49.03

N

980.7

N

294.2

kN

5

kgf

100

kgf

30

tf

392.3

kN

40

tf

49.03

kN

5

tf

●

98.07

kN

10

tf

●

196.1

kN

20

tf

●

490.3

kN

50

tf

●

980.7

kN

100

tf

1.961

kN

200

kgf

4.903

kN

500

kgf

●

●

98.07

N

10

kgf

●

196.1

N

20

kgf

●

490.3

N

50

kgf

● ●

-

22

-

-

-

-

2.942

kN

300

kgf

5.884

kN

600

kgf

9.807

kN

1

tf

●

19.61

kN

2

tf

●

29.42

kN

3

tf

Rated Capacity

BCL-A

CB17-11

C2G1-A

CB004

U2D1

CB14-21

C2D1

C2T1-A

CC002-NS

CB004S

DC002-NS

CB063

Model No.

ULA

UTA

Model No.

CCR1(B)

CCS1

CL-B

UWV1

CBC1

U3C1-B

Model No.

11

8

9

10

22

-

22

22

22

15

16

17

14

22

22

●

● ●

● 1.471 N

{150 kgf} ●

●

●

●

11.77 N

{1.2 kgf}

14.71 N

{1.5 kgf}

29.42 N

{3 kgf}

44.13 N

{4.5 kgf}

117.7 N

{12 kgf}

●

●

: Make-to-order (MTO) manufacturing product, ● : Make-to-stock (MTS) manufacturing product

Compression Service Tension Service Beam Type Compression & Tension Service

Page Page Page

for Electrical Scale for Slight load Special Measurement

441.3 N

{45 kgf}

4.903

kN

500

kgf

9.807

kN

1

tf

19.61

kN

2

tf

29.42

kN

3

tf

49.03

kN

5

tf

58.84

kN

6

tf

98.07

kN

10

tf

147.1

kN

15

tf

20

tf

196.1

kN

490.3

kN

50

tf

980.7

kN

100

tf

2.452 kN

{250 kgf}

2.452 kN

{250 kgf}

333.4 kN

{34 tf}

Page

19.61

kN

2

tf

29.42

kN

3

tf

4.413 kN

{450 kgf} 7.845 kN

{800 kgf}

●

●

●

●

●

●

1.961

MN

200

tf

2.942

MN

300

tf

49.03

kN

5

tf

●

2.452 kN

{250 kgf}●

39.23 kN

{4 tf}●

LSM-B 12

(A)

●

●

(A)

●

●

●

●

● ● ● ● ● ●

● ● ● ● ● ●

U2S1 13 ● ● ● ● 2.452 kN

{250 kgf}

Load Cell Selection Table

●

●

● ●

●

1.961 kN

{200 kgf}

2.452 kN

{250 kgf}

1.471 kN

{150 kgf}

441.3 N

{45 kgf}

LSMS 12

● ● ● ● ● ● ● ●

Protection

Grade

%R.O.

Nonlinearity

%R.C.

Safe

Overload

SafeTemp.

Range

mV/V

Rated

Output

Protection

Grade

%R.O.

Nonlinearity

%R.C.

Safe

Overload

SafeTemp.

Range

mV/V

Rated

Output

245.2

kN

294.2

kN

98.07

kN

10

tf

196.1

kN

20

tf

25

tf

30

tf

68.65 kN

{7 tf}

mV/V %R.O. %R.C.

0.05 High accuracy canister type load cell. Suitable for Tank or Hopper weighing systms. High rated output 3 mV/V.

Double convex type, all stainless steel structure. High accuracy and reliability. OIML certified.

0.15 Compact, light weight load cell with all stainless steel construction. Suitable for use in a corrosive environment.

0.05 Precise low-profile load cell for compression service. All stainless steel construction.

0.05:under 20T

0.1:over 50T

±0.04

Low profile, shear web type load cell. It is strong in lateral load. Suitable for use in the limited space.

0.6 Canistar, through-hole type. Current output of 4 mA to 20 mA at the excitation voltage of 24 V.

0.05 High accuracy canister type load cell. Suitable for Tank or Hopper weighing system.

0.03 Compact and light weight beam type load cell.

0.2 Ideal for measuring the tension force of cable in crane application

0.025 Ideal for weighing systems such as tank, hopper or floor scale. OIML certified.

0.05 High presicion, hermetically sealed all stainless steel load cell. OIML certified.

0.05 Beam type load cell with all stainless steel construction. OIML certified.

0.05 High accuracy, tension/compression service load cell.

IP64

IP68

IP67

IP68

IP64

IP64

IP64

IP64

IP64

IP67

IP68

IP67

IP64

Characteristics Protection

Grade

Nonlinearity

Safe

Overload

SafeTemp.

Range

Rated

Output

0.3 130 IP30

0.3 150

-10 ~ 60

-10 ~ 60 IP30

Excellent in measuring the slight load and the tension of yarn, etc.

Low capacity, compact size, single point type load cell. OIML certified.

Low profile, and suitable for high capacity and thin weighing scale. OIML certified.

Low capacity, compact size, single point type load cell.

OIML and NTEP certified.

Single point type load cell and strong in unbalanced load. OIML certified.

Single point type load cell with protective cover.OIML certified.

Middle range single point type load cell. OIML certified.

Digital load cell excelling low noise. OIML certified.

Middle range single point type load cell and strong in unbalanced load. OIML certified.

Highly accurate load cell for multipoint method platform type weighing scale.

Good performance in severe environment. OIML certified.

Tall profile stainless steel structure. Suitable for large size platform scale. OIML certified.

-10 ~ 50

-10 ~ 50

-10 ~ 50

-10 ~ 50

-10 ~ 50

-10 ~ 70

-20 ~ 70

-20 ~ 70

-20 ~ 70

-10 ~ 50

-10 ~ 50

-20 ~ 70

2

100GR:1.75

1.75

2GR:0.5

3

2

2

3

4 mA

~ 20 mA

3

3

1

3

2

(1.6:200K)

2

3

2

(1:250K)

2 0.2 500 IP64 Strong in overload and widely used as a load detector of a total weighing system.

2 0.3 150 IP64 Used in weighing system with high capacity popularly.

0.5 0.5 300 IP64 Used in crane applications to prevent falls caused by overload.

3 150 IP64 Low profile, shear web type compression/tension service load cell. Strong in lateral load.

2 0.03 150 IP64 Suitable for a weighing systems with limited installation height.

3 0.05 150 IP64 Simple type load cell with aluminum alloy structure.

-20 ~ 100

-20 ~ 100

-15 ~ 75

-20 ~ 80

-20 ~ 100

-20 ~ 80

150

150

150

150

150

150

200

150

150

150

150

0.025 High accuracy compact and light weight tension/compression service.

0.15

IP67

IP67 Compact size light weight, tension/compression service with all stainless steel construction.

3

2

150

150

500:under 100K

150:over 200K

500:under 100K

150:over 200K

IP40

IP64

IP64

IP64

IP40

IP64

IP65

IP64

IP68

IP67

IP67

IP68

Protection

Grade

0.02

0.02

0.015

0.015

0.015

0.02

0.02

0.025

0.02

0.025

0.015

0.02

%R.O.

Nonlinearity

150

300

150

150

200

150

150

150

150

150

150

150

%R.C.

Safe

Overload

SafeTemp.

Range

1.6

1

2

2

2

2.2

2

2

2

2

2

106 count ±500 count

mV/V

Rated

Output Characteristics

Characteristics

Characteristics

0.1:under 20T

0.2:over 50T

0.025 S-beam type high accurate load cell. All stainless structure and excelling in the environmental factor.

-20 ~ 100

-20 ~ 70

-20 ~ 80

-20 ~ 80

-20 ~ 80

-10 ~ 70

1 IP60 Miniature type load cell. Suitable for application with limited space. 1.3

(0.4:500G)

150

(200:500K~2T) -10 ~ 60

(-10~70:500K~2T)

-20 ~ 100

-20 ~ 80

-30 ~ 70

-20 ~ 80

-20 ~ 80

-20 ~ 80

-20 ~ 80

-20 ~ 80az

-10 ~ 80

2 150 -20 ~ 80 IP68

Load Cell Selection Table

0.6 2 150 -20 ~ 60 IP60 Miniature type load cell with 5 mm height and 7 mm diameter. Suitable for application with limited space.

8

http://www.minebea-mcd.com http://www.minebea-mcd.com

9

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Accuracy :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp.range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Element material :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Displacement Natural Freq.

(Hz)

Weight

(Approx.kg)

< Accessories >

< Optional fittings >

CC010 Series - Double Convex, Compression Type Load Cell

Unit : mm

φA φB C

(Unit : mm)

Inspection data sheet 1 copy

Metal fittings AIC-035-*(-S)

Mounting attachment with slide stop mechanism

Flexible stop type FCACC010-*Bx(S)

Check rod type CCACC010-*Bx(S)

Unit : mm

< Metal fitting AIC-035-*(-S) >

(-S) : Stainless steel structure.

φ88

φB C

φA

φ82 SR350

Cable

15.5

138.5

118.5

27

(70)

2×2-M10

190

155

75

Upper base

4-φ14 (Upper base)

4-φ22 (Lower base)

Earth cable

Bearing plate

Lower base

115

150 190.5

15 15

4-Washer

Outer diameter φ34

Inner diameter φ13

Height 10

● Double convex type, all stainless steel structure, and

good performance in severe environment.

● Highly accurate compression service load cell with

stable repeatability. (OIML-D1 or equivalent)

4.903 kN {500 kgf} ~ 490.3 kN {50 tf}

150 %R.C.

200 %R.C.

2 mV/V±0.002 mV/V

0.04 %R.O.

(Including Non-linearity, Hysteresis and Repeatability)

0.03 %R.O./20 min

0.03 %R.O./20 min

12 V

20 V

±0.02 mV/V

700 Ω±7 Ω

700 Ω±5 Ω

5 000 MΩ or more (DC50 V)

(between bridge and body)

- 10 ℃ ~ 50 ℃

- 20 ℃ ~ 70 ℃

0.028 %R.O./10 ℃

0.03 %LOAD/10 ℃

φ7, 4-cores 5 m shielded cable directly attached.

Cable end is separated. (CC010-5T ~ -50T : 10 m)

IP68

Stainless steel

106

times at rated capacity.

5 400 5

9 400

6 800

8 100

6 100

2 000

2 700

3 100

3 400

0.09

0.06

0.06

0.06

0.13

0.15

0.16

0.19

17.5

26

45

50

4.903 kN {500 kgf}

9.807 kN {1 tf}

19.61 kN {2 tf}

29.42 kN {3 tf}

49.03 kN {5 tf}

98.07 kN {10 tf}

196.1 kN {20 tf}

294.2 kN {30 tf}

490.3 kN {50 tf}

CC010-500K

CC010-1T

CC010-2T

CC010-3T

CC010-5T

CC010-10T

CC010-20T

CC010-30T

CC010-50T

SR50

SR100

SR100

SR150

SR150

27

36

54

58

< Table of Parts No. >

Parts No. Rated Capacity

CC010-500K, CC010-1T

CC010-2T, CC010-3T

CC010-5T, CC010-10T, CC010-20T, CC010-30T

CC010-50T

AIC-035-500K/1T(-S)

AIC-035-2T/3T(-S)

AIC-035-5T/30T(-S)

AIC-035-50T(-S)

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Element material :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Displacement Natural Freq.

(Hz)

Weight

(Approx.kg)

< Accessories >

< Optional fittings >

CMM1 Series - Compact Size Compression Type Load Cell

Unit : mm

(Unit : mm)

Inspection data sheet 1 copy

Expansion Plate EPA-*

Mounting attachment with slide stop mechanism

Flexible stop type FCA-CMM1-50K/2T-S

Steel ball type SCA-CMM!-50K/2T

Mounting Plate MPA-* with bolt for installation

● Compact, light weight load cell with all stainless steel

construction.

● Suitable for use in a corrosive environment.

490.3 N {50 kgf} ~ 19.61 kN {2 tf}

150 %R.C.

200 %R.C.

2 mV/V±0.005 mV/V

0.15 %R.O.

0.1 %R.O.

0.05 %R.O.

12 V or less

18 V

±0.06 mV/V

425 Ω±50 Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V)

(between bridge and body)

- 10 ℃ ~ 70 ℃

- 20 ℃ ~ 80 ℃

0.05 %R.O./10 ℃

0.1 %LOAD/10 ℃

φ6.3, 4-cores 3 m shielded cable directly attached

with Y type terminals

IP67

Stainless steel

106

times at rated capacity.

3 600 0.34

5 000

6 000

7 000

10 000

10 000

0.15

0.10

0.07

0.07

0.05

0.05

490.3 N {50 kgf}

980.7 N {100 kgf}

1.961 kN {200 kgf}

4.903 kN {500 kgf}

9.807 kN {1 tf}

19.61 kN {2 tf}

CMM1-50K

CMM1-100K

CMM1-200K

CMM1-500K

CMM1-1T

CMM1-2T

51 16

Cable

9.5

4-M5 × 0.8 depth 6

φ42 (P.C.D.)

SR50

φ10

25

21

φ11.5

沈阳瑞思达轴承有限公司SHENYANG TOTAL BEARING CO.,LTD.

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249

Mobile: 13940483518 15640413155（微信）

Web: https://www.rstbearing.com.cn

10

http://www.minebea-mcd.com http://www.minebea-mcd.com

11

● Precise low-profile load cell for compression service

with all stainless steel construction.

● Suitable for use in a corrosive environment.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Element material :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.kg)

< Accessories >

< Optional fittings >

CMP1 Series - Double Convex Type Load Cell

Unit : mm

(Unit : mm)

Inspection data sheet 1 copy

Expansion Plate EPA-*

Mounting attachment with slide stop mechanism

Flexible stop type FCA-CMP1-*-S

Check rod type CCA-CMP1-*

Steel ball type SCA-CMP!-*(-S)

Mounting Plate MPA-* with mounting bolt

Bearing Plate BPA-*

28

Cable

φD (P.C.D.)

φG

φA

E

C

5

B

F

R1/2

B

40

45

50

2.452 kN {250 kgf} ~ 196.1 kN {20 tf}

150 %R.C.

200 %R.C.

2 mV/V±0.005 mV/V

(CMP1-250K : 1 mV/V±0.005 mV/V)

0.05 %R.O.

0.05 %R.O.

0.05 %R.O.

12 V or less

18 V

±0.02 mV/V

350 Ω±3.5 Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V)

(between bridge and body)

- 10 ℃ ~ 70 ℃

- 20 ℃ ~ 80 ℃

0.05 %R.O./10 ℃

(CMP1-250K : 0.1 %R.O./10 ℃)

0.1 %LOAD/10 ℃

φ7, 4-cores 10 m shielded cable directly attached

with Y-type terminal lugs.

IP68

Stainless steel

106

times at rated capacity.

1.8

2.0

3.7

Natural Freq.

(Hz)

1 900

2 600

4 000

9 000

12 000

12 000

12 000

Displacement

0.03

0.06

0.07

0.11

0.14

φA

88

88

114

2.452 kN {250 kgf}

4.903 kN {500 kgf}

9.807 kN {1 tf}

19.61 kN {2 tf}

49.03 kN {5 tf}

98.07 kN {10 tf}

196.1 kN {20 tf}

CMP1-250K

CMP1-500K

CMP1-1T

CMP1-2T

CMP1-5T

CMP1-10T

CMP1-20T

C

SR150

SR150

SR230

φD

72

72

90

E

3-M6 x 1 depth 6

3-M6 x 1 depth 6

3-M8 x 1.25 depth 6

F

16

18

22.5

φG

18

18

21

● High accurate canister type load cell. Suitable for Tank

or Hopper weighing systems.

● High rated output at 3 mV/V.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Element material :

Paint :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.kg)

< Accessories >

< Optional fittings >

CCP1(A) Series - Precise Compression Type Load Cell

Unit : mm

(Unit : mm)

Load buttom (LBU-*) with O-shape ring 1 piece

Expansion Plate EPA-*

Mounting attachment with slide stop mechanism

Flexible stop type FCA-CCP1-*

Mounting Plate MPA-* with mounting bolt

Bearing Plate BPA-*

Inspection data sheet 1 copy

Cable

R1/2{PT}

2-C

67 35

φE D

φA

Load buttom

Shape from arrow view.

F

(I) B

40

G

H

B

115

115

115

150

215

290

490.3 N {50 kgf} ~ 196.1 kN {20 tf}

150 %R.C. (CCP1-50K ~ 100K : 500 %R.C.)

200 %R.C. (CCP1-50K ~ 100K : 500 %R.C.)

3 mV/V±0.003 mV/V

0.05 %R.O.

0.02 %R.O. (CCP1-50K ~ 100K : 0.05 %R.O.)

0.02 %R.O. (CCP1-50K ~ 100K : 0.05 %R.O.)

12 V or less

20 V

±0.03 mV/V

350 Ω±3.5 Ω

350 Ω±5 Ω

5 000 MΩ or more (DC50 V)

(between bridge and body)

- 10 ℃ ~ 70 ℃

- 20 ℃ ~ 100 ℃

0.03 %R.O./10 ℃

0.03 %LOAD/10 ℃

φ10, 4-cores 3 m shielded cable directly

attached, with Y-type terminal lugs at the end.

IP64

Alloy steel

Epoxy resin (Munsell 6GY 3.5/2 semi-gloss)

106

times at rated capacity.

3.1

3.1

2.7

4.3

11.9

27

Natural Freq.

(Hz)

360

580

1 200

1 400

1 800

2 800

2 100

2 600

3 500

2 500

1 800

Displacement

0.28

0.23

0.18

0.17

0.15

0.13

0.17

0.16

0.13

0.18

0.24

φA

89

89

89

89

127

165

490.3 N {50 kgf}

980.7 N {100 kgf}

1.961 kN {200 kgf}

2.942 kN {300 kgf}

4.903 kN {500 kgf}

9.807 kN {1 tf}

19.61 kN {2 tf}

29.42 kN {3 tf}

49.03 kN {5 tf}

98.07 kN {10 tf}

196.1 kN {20 tf}

CCP1-50K

CCP1-100K

CCP1-200K

CCP1-300K

CCP1-500K

CCP1-1T

CCP1-2T

CCP1-3T

CCP1-5T

CCP1-10T

CCP1-20T

C

M10 X 1.25 depth 14

M12 X 1.25 depth 14

M12 X 1.25 depth 14

M24 X 2 depth 30

M39 X 2 depth 50

M50 X 2 depth 65

D

106

106

106

106

152

193

φE

32

32

32

64

102

145

F

6

6

6

9

12

15

G

18

18

32

46

71

80

H

1.5

1.5

1.6

1.6

1.6

1.6

I

6.5

10

10

18

30

27

沈阳瑞思达轴承有限公司SHENYANG TOTAL BEARING CO.,LTD.

Tel: 024 22945833 22923833 24853899 Fax: 024 88729249

Mobile: 13940483518 15640413155（微信）

Web: https://www.rstbearing.com.cn

12

http://www.minebea-mcd.com http://www.minebea-mcd.com

13

● Miniture type load cell. Suitable for application with

limited space.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Material :

Mounting method :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.g)

< Accessories >

LSM-B Series - Miniture Compression Type Load Cell

Unit : mm

(Unit : mm)

Inspection data sheet 1 copy

LSM-500G ~ 100K-B

LSM-500K ~ 2T-B

φD Cable

φ1.8, 4-cores 3 m

shielded wire, cable

end is separated.

φA

Cable

φ3.2, 4-cores 3 m

shielded wire, cable

end is separated.

φ21

B

4

5

9.5

9.5

4.903 N {500 gf} ~ 19.61 kN {2 tf}

150 %R.C.

150 %R.C. (LSM-500K ~ 2T-B : 200 %R.C.)

1.3 mV/V±0.7 mV/V (LSM-500G-B : 0.4 mV/V or more)

1 %R.O. (LSM-2T-B : 2 %R.O.)

1 %R.O.

1 %R.O.

5 V or less

8 V

±0.2 mV/V

350 Ω±10 Ω

350 Ω±10 Ω

1 000 MΩ or more (DC50 V) (between bridge and body)

0 ℃ ~ 50 ℃ (LSM-500K~2T-B: - 10 ℃ ~ 60 ℃)

- 10 ℃ ~ 60 ℃ (LSM-500K~2T-B: - 10 ℃ ~ 70 ℃)

2 %R.O./10 ℃ (LSM-500K~2T-B: 1 %R.O./10 ℃)

2 %LOAD/10 ℃ (LSM-500K~2T-B: 1 %LOAD/10 ℃)

φ1.8, 4-cores 3 m shielded cable directly attached,

Cable end is separated. (LSM-500K ~ 2T-B : φ3.2)

IP60

LSM-500G~2K-B: Aluminium

LSM-5K~2T-B: Stainless steel

by adhesive or double coated adhesive tape.

106

times at rated capacity.

6

10

20

22

25

Natural Freq.

(Hz)

10 000

16 000

21 000

14 000

19 000

29 000

33 000

50 000

Displacement

0.05

0.05

0.05

φA

12

15

20

20

4.903 N {500 gf}

9.807 N {1 kgf}

19.61 N {2 kgf}

49.03 N {5 kgf}

98.07 N {10 kgf}

196.1 N {20 kgf}

490.3 N {50 kgf}

980.7 N {100 kgf}

4.903 kN {500 kgf}

9.807 kN {1 tf}

19.61 kN {2 tf}

LSM-500G-B

LSM-1K-B

LSM-2K-B

LSM-5K-B

LSM-10K-B

LSM-20K-B

LSM-50K-B

LSM-100K-B

LSM-500K-B

LSM-1T-B

LSM-2T-B

C

0.5

0.5

1.5

1.5

φE

1

1

2

3

SR10

(SR11.5)

10

2

B

C

C1

● Miniture type load cell with 5 mm at height and 7 mm at diameter.

Suitable for application with limited space.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Material :

Mounting method :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.g)

< Accessories >

LSMS Series - Miniture Compression Type Load Cell

Unit : mm

(Unit : mm)

Inspection data sheet 1 copy

196.1 N {20 kgf} ~ 490.3 N {50 kgf}

150 %R.C.

200 %R.C.

0.6 mV/V±0.1 mV/V

1 %R.O.

1 %R.O.

1 %R.O.

5 V

12 V

±0.1 mV/V

350 Ω±5 Ω

350 Ω±5 Ω

1 000 MΩ or more (DC50 V) (between bridge and body)

- 10 ℃ ~ 50 ℃

- 20 ℃ ~ 60 ℃

1 %R.O./10 ℃

1 %LOAD/10 ℃

φ1.0, 4-cores 50 cm shielded cable directly attached,

cable end is separated.

IP64

Stainless steel

by adhesive or double coated adhesive tape.

106

times at rated capacity.

2

Natural Freq.

(kHz)

67

62

Displacement

0.003

0.005

196.1 N {20 kgf}

490.3 N {50 kgf}

LSMS-20K

LSMS-50K

see outlines.

Silicon coating

φ1.0, 4-cores shielded wire

Shield

Separated

φ7 500

φ2 SR3 50

5

(40)

5

0.5

1

0.5~1

ID. Mark

for LSMS-20K

● High precise tension service load cell with stainless steel

construction.

● Suitable for use in a tank / hopper scale and the other

various tension service weighing systems.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Element material :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.kg)

< Accessories >

< Optional fittings >

U2S1 Series - S Type Beam Load Cell

(Unit : mm)

Inspection data sheet 1 copy

Load buttom LBU-*

Spherical rod-end (PR*, REB-*, HRT-*) with hexagon nuts for installation

(E)

* Attached spherical rod-end is an option.

B

D

(E)

C

2-A

Unit : mm

B

60

80

1.961 kN {200 kgf} ~ 19.61 kN {2 tf}

150 %R.C.

200 %R.C.

- 2 mV/V±0.02 mV/V (Tension service)

2 mV/V±0.02 mV/V (Compression service)

0.025 %R.O.

0.025 %R.O.

0.025 %R.O.

0.025 %R.O. / 20 min

0.025 %R.O. / 20 min

12 V

20 V

±0.02 mV/V

420 Ω±40 Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V)

(between bridge and body)

- 10 ℃ ~ 70 ℃

- 20 ℃ ~ 80 ℃

0.05 %R.O./10 ℃

0.02 %LOAD/10 ℃

φ4.7, 4-cores 6 m shielded cable directly attached.

with Y-type terminal lugs.

IP68

Stainless steel

106

times at rated capacity.

0.9

2.0

Natural Freq.

(Hz)

2 000

2 000

2 000

2 000

2 500

Displacement

0.10

0.10

0.15

0.30

0.30

φA

M12 x 1.75

M24 x 2

1.961 kN {200 kgf}

2.452 kN {250 kgf}

4.903 kN {500 kgf}

9.807 kN {1 tf}

19.61 kN {2 tf}

U2S1-200K

U2S1-250K

U2S1-500K

U2S1-1T

U2S1-2T

C

32

38

D

76

108

E

15

15

14

13

25

14

http://www.minebea-mcd.com http://www.minebea-mcd.com

15

● Compact size tension and compression service load cell.

● Suitable for a high accuracy weighing system.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Element material :

Paint :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.kg)

< Accessories >

< Optional fittings >

U3B1-B Series - S Type Beam Load Cell

(Unit : mm)

Inspection data sheet 1 copy

Load buttom LBU-*

Spherical rod-end (PR*, HRT-*) with hexagon nuts for installation

* Attached spherical rod-end is an option.

Unit : mm

6 20 6

2-C

φ

18 56 2

11.5

D

A

B

58

D

B

30

35

196.1 N {20 kgf} ~ 9.807 kN {1 tf}

150 %R.C.

200 %R.C.

3 mV/V±0.015 mV/V

0.05 %R.O.

0.05 %R.O.

0.03 %R.O.

10 V or less

15 V

±0.03 mV/V

350 Ω±3.5 Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V)

(between bridge and body)

- 10 ℃ ~ 70 ℃

- 20 ℃ ~ 80 ℃

0.05 %R.O./10 ℃

0.1 %LOAD/10 ℃

φ6.3, 4-cores 3 m shielded cable directly

attached with Y-type terminal lugs.

IP64

U3B1-20K ~ 200K-B : Aluminium

U3B1-500K, 1T-B : Alloy steel

Main body : Painted with epoxy resin (Black)

Cover : Painted with polyurethane (Yellow)

106

times at rated capacity.

0.33

0.63

Natural Freq.

(Hz)

600

1 100

1 600

2 100

2 600

3 000

Displacement

0.18

0.16

0.14

0.12

0.14

0.12

φA

60

70

196.1 N {20 kgf}

490.3 N {50 kgf}

980.7 N {100 kgf}

1.961 kN {200 kgf}

4.903 kN {500 kgf}

9.807 kN {1 tf}

U3B1-20K-B

U3B1-50K-B

U3B1-100K-B

U3B1-200K-B

U3B1-500K-B

U3B1-1T-B

C

M6 x 1 depth 13

M6 x 1 depth 12

M6 x 1 depth 18

M12 x 1.75 depth 17

M12 x 1.75 depth 17

M12 x 1.75 depth 16

D

13

12

18

17

17

16

● Compact size tension and compression service load cell.

● Suitable for a high accuracy weighing system.

● OIML certified.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Element material :

Paint :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.kg)

< Accessories >

< Optional fittings >

C3B1-NS Series - Square shape Beam Load Cell

(Unit : mm)

Inspection data sheet 1 copy

Bearing Plate BP-*

Mounting attachment with slide stop mechanism

Rocker-Pin method RCA-C3B1-*

Rocker-Pin RP-*

D E±0.2 F±0.2 (G)

φH Spot facing 2-φJ Hole Loading

Direction

K

A±0.2

8 (MAX)

Drain hole

B±0.1 C±0.1

L

I M

1.5 1.5

Unit : mm

1.961 kN {200 kgf} ~ 49.03 kN {5 tf}

150 %R.C.

200 %R.C.

3 mV/V±0.003 mV/V

0.025 %R.O.

0.025 %R.O.

0.025 %R.O.

0.03 %R.O. / 20 min

0.03 %R.O. / 20 min

12 V or less

20 V

±0.03 mV/V

420 Ω±40 Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V)

(between bridge and body)

- 10 ℃ ~ 70 ℃

- 20 ℃ ~ 80 ℃

0.05 %R.O./10 ℃

0.02 %LOAD/10 ℃

φ4.7, 4-cores 6 m shielded cable directly attached

with Y-type terminal lugs.

IP67

Alloy steel

Painted with epoxy resin (Black)

106

times at rated capacity.

1.1

2.0

Natural Freq.

(Hz)

2 600

2 600

2 600

2 500

2 300

2 200

2 200

Displacement

0.5

0.9

φA

131

171.5

1.961 kN {200 kgf}

2.942 kN {300 kgf}

4.903 kN {500 kgf}

9.807 kN {1 tf}

19.61 kN {2 tf}

29.42 kN {3 tf}

49.03 kN {5 tf}

C3B1-200K-NS

C3B1-300K-NS

C3B1-500K-NS

C3B1-1T-NS

C3B1-2T-NS

C3B1-3T-NS

C3B1-5T-NS

C

31.8

38.1

D

12.6

19

B

31.8

38.1

E

76.2

95.25

G

16.8

19.15

φH

20.6

30.2

F

25.4

38.1

I

14.2

17

K

57.2

85

L

0.6

1

φJ

13.5

19.8

M

34.8

41.1

16

http://www.minebea-mcd.com http://www.minebea-mcd.com

17

● Suitable for weighing systems such as Floor scale / Tank

scale / Hopper, etc.

● High accuracy measurement can be made when

assembled in a rocker pin (Auto alignment mechanism).

● Hermetically sealed stainless steel construction providng

excellent protection in a hazardous environment.

● OIML certified.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Element material :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.kg)

< Accessories >

< Optional fittings >

C2B1B Series - Square shape Beam Load Cell

(Unit : mm)

Inspection data sheet 1 copy

Bearing Plate BPSB-*

Mounting attachment with slide stop mechanism

Rocker-Pin method RCA-C2B1B-*-S

Rocker-Pin RPSB-*

Unit : mm

D E F (G)

H J

A

M

2-I through hole

C B

K

L

1.961 kN {200 kgf} ~ 19.61 kN {2 tf}

150 %R.C.

200 %R.C.

2 mV/V±0.002 mV/V

(C2B1B-200K : 1.6 mV/V±0.002 mV/V)

0.025 %R.O.

0.025 %R.O.

0.025 %R.O.

0.03 %R.O. / 20 min

0.03 %R.O. / 20 min

12 V or less

20 V

±0.02 mV/V

420 Ω±40 Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V)

(between bridge and body)

- 10 ℃ ~ 70 ℃

- 20 ℃ ~ 80 ℃

0.05 %R.O./10 ℃

0.02 %LOAD/10 ℃

φ4.7, 4-cores 6 m shielded cable directly attached.

with Y-type terminal lugs.

IP68

Stainless steel

106

times at rated capacity.

0.8

1.5

Natural Freq.

(Hz)

1 000

1 500

Displacement

0.15

0.15

0.20

0.30

0.50

A

131

171.5

1.961 kN {200 kgf}

2.452 kN {250 kgf}

4.903 kN {500 kgf}

9.807 kN {1 tf}

19.61 kN {2 tf}

C2B1B-200K

C2B1B-250K

C2B1B-500K

C2B1B-1T

C2B1B-2T

C

32

38

D

12.6

19

B

32

38

E

76.2

95.25

G

16.8

19.15

H

M12

M20

F

25.4

38.1

φI

13

19.8

K

14

17

L

22.4

22.7

24.3

26.9

30.2

φJ

26.6

30.2

● Suitable for weighing systems with limited height at the

mounting point.

● All stainless steel structure.

● High accurate type (-U) with 0.03%R.O. for non-linearity

and hysteresis is available.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Element material :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.kg)

< Accessories >

< Optional fittings >

CBE1(-U) Series - Load Beam type Load Cell

(Unit : mm)

Inspection data sheet 1 copy

Mounting attachment with slide stop mechanism

Check rod method CCACBE1-*S

< Mounting example >

Unit : mm

φD hole

2-φE hole A B 65 10

120

60 36 24

Output cable 40

M8 tap hole

No hole for 100K and 200K capacity. 20

φ

φ

43±0.5

26

φC

F 20

* (-U): High accuracy type.

49.03 N {5 kgf} ~ 1.961 kN {200 kgf}

150 %R.C.

200 %R.C.

2 mV/V±0.003 mV/V

0.05 %R.O. (High accurate type (-U) : 0.03 %R.O.)

0.05 %R.O. (High accurate type (-U) : 0.03 %R.O.)

0.03 %R.O.

12 V or less

20 V

±0.02 mV/V

400 Ω±50 Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V)

(between bridge and body)

- 10 ℃ ~ 60 ℃

- 20 ℃ ~ 80 ℃

0.03 %R.O./10 ℃

0.03 %LOAD/10 ℃

φ6.3, 4-cores 5 m shielded cable directly attached.

with Y-type terminal lugs.

IP67

Stainless steel

106

times at rated capacity.

0.73

0.76

0.76

Natural Freq.

(Hz)

250

384

420

555

1 250

1 428

Displacement

0.19

0.21

0.25

0.23

0.32

A

27

25

49.03 N {5 kgf}

98.07 N {10 kgf}

196.1 N {20 kgf}

490.3 N {50 kgf}

980.7 N {100 kgf}

1.961 kN {200 kgf}

CBE1-5K(-U)

CBE1-10K(-U)

CBE1-20K(-U)

CBE1-50K(-U)

CBE1-100K(-U)

CBE1-200K(-U)

φC

34

36

B

18

20

φD

8.1

10.1

φE

6.6

8.4

F

8.5

9.5

● OIML certified.

18

http://www.minebea-mcd.com http://www.minebea-mcd.com

19

● Low capacity, universal, bending beam load cell.

● ULA is excellent in small force measurement.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Durability :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.g)

< Accessories >

ULA Series - Low Capacity Load Cell

(Unit : mm)

Inspection data sheet 1 copy

UTA Series - Low Capacity Load Cell

Specifications

Features

Outlines

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Durability :

< Table of parts No. >

< Accessories >

Inspection data sheet 1 copy

Unit : mm

Loading

direction

Tension

Compression

5

17

20

23

12

9

3.5

11

13

13 13

56

5 3.5

30

φ2 drilled

9

A

42

35

42

50

17

4

19.61 mN {2 gf} ~ 980.7 mN {100 gf}

130 %R.C.

130 %R.C.

1.75 mV/V±0.35 mV/V (UL-2GR : 0.65 mV/V±0.15 mV/V)

0.2 %R.O.

0.2 %R.O.

0.2 %R.O.

3 V or less

6 V

±0.175 mV/V (UL-2GR : ±0.05 mV/V)

270 Ω±40 Ω

270 Ω±40 Ω

2 000 MΩ or more (DC50 V) (between bridge and body)

0 ℃ ~ 50 ℃

- 10 ℃ ~ 60 ℃

0.5 %R.O./10 ℃

0.5 %LOAD/10 ℃

4-cores parallel vinyl 60 cm wire. Cable end is separated.

IP30

106

times at rated capacity.

100

Natural Freq.

(Hz)

60

165

210

170

230

Displacement

±0.12

±0.4

19.61 mN {2 gf}

98.07 mN {10 gf}

196.1 mN {20 gf}

490.3 mN {50 gf}

980.7 mN {100 gf}

UL-2GR

ULA-10GR

ULA-20GR

ULA-50GR

ULA-100GR

A

2

1.5

● Measuring range of UTA series is little higher than ULA.

● Push-pull type load cell.

Parts No. Rated Capacity Weight

(Approx.g)

(Unit : mm)

Unit : mm

Loading

direction

Tension

Compression

5

22

25

28

12

13.5

3.5

15

25

13 13

56

5 3.5

30

φ2 screw

13.5

50

17

40.5

40.5

35

980.7 mN {100 gf} ~ 19.61 N {2 kgf}

150 %R.C.

150 %R.C.

±2 mV/V±0.4 mV/V (UTA-100GR : ±1.75 mV/V±0.35 mV/V)

0.2 %R.O.

0.2 %R.O.

0.2 %R.O.

3 V or less

6 V

±0.2 mV/V (UTA-100GR : ±0.175 mV/V)

270 Ω±40 Ω

270 Ω±40 Ω

2 000 MΩ or more (DC50 V) (between bridge and body)

0 ℃ ~ 50 ℃

- 10 ℃ ~ 60 ℃

0.5 %R.O./10 ℃

0.5 %LOAD/10 ℃

4-cores parallel vinyl 60 cm wire. Cable end is separated.

IP30

106

times at rated capacity.

100

Natural Freq.

(Hz)

300

440

700

980

1 310

Displacement

980.7 mN {100 gf} ±0.04

1.961 N {200 gf}

4.903 N {500 gf}

9.807 N {1 kgf}

19.61 N {2 kgf}

UTA-100GR

UTA-200GR

UTA-500GR

UTA-1K

UTA-2K

8

●Low capacity load cell. ●Loading plate can be greater taken.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Material :

Outlines

< Table of Parts No. >

Parts No. Rated Capacity Weight

(Approx.g)

< Accessories >

BCL-A Series - Load Cell for Electronic Scale

(Unit : mm)

Inspection data sheet 1 copy

CB17-11 Series - Load Cell for Electronic Scale

Specifications

Features

Outlines

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Durability :

< Table of parts No. >

< Accessories >

Inspection data sheet 1 copy

+30

-20

●OIML certified.

Unit : mm

2.942 N {300 gf} ~ 44.13 N {4.5 kgf}

150 %R.C.

200 %R.C.

1.6 mV/V±0.2 mV/V

0.02 %R.O.

0.02 %R.O.

0.02 %R.O.

0.02 %R.O. /20 min

0.02 %R.O. /20 min

10 V or less

15 V

±0.04 mV/V

420 Ω Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V) (between bridge and body)

- 10 ℃ ~ 50 ℃

- 10 ℃ ~ 50 ℃

0.04 %R.O./10 ℃

0.02 %LOAD/10 ℃

φ3.2, 4-cores shielded 40 cm wire directly attached.

Cable end is separated.

IP40

Aluminium

40

Natural Freq.

(Hz)

97

143

235

263

372

455

Displacement

0.52

0.47

0.49

2.942 N {300 gf}

5.884 N {600 gf}

11.77 N {1.2 kgf}

14.71 N {1.5 kgf}

29.42 N {3 kgf}

44.13 N {4.5 kgf}

BCL-300GM-A

BCL-600GM-A

BCL-1.2K-A

BCL-1.5K-A

BCL-3K-A

BCL-4.5K-A

● Low capacity, Compact size.

Parts No. Rated Capacity Weight

(Approx.g)

(Unit : mm)

Unit : mm

5.884 N {600 gf} ~ 29.42 N {3 kgf}

300 %R.C.

400 %R.C.

1 mV/V±0.1 mV/V

0.02 %R.O.

0.02 %R.O.

0.02 %R.O.

0.02 %R.O. / 20 min

0.02 %R.O. / 20 min

10 V or less

15 V

±0.05 mV/V

420 Ω Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V) (between bridge and body)

- 10 ℃ ~ 50 ℃

- 10 ℃ ~ 50 ℃

0.04 %R.O./10 ℃

0.012 %LOAD/10 ℃

φ3.2, 4-cores shielded 40 cm wire directly attached.

Cable end is separated.

IP64

Aluminium

40

Natural Freq.

(Hz)

200

290

410

500

Displacement

5.884 N {600 gf} ±0.17

9.807 N {1 kgf}

19.61 N {2 kgf}

29.42 N {3 kgf}

CB17-600G-11

CB17-1K-11

CB17-2K-11

CB17-3K-11

+30

-20

M3 depth 13

6

6 2-M3 depth 15

7 5

18

5 7 2-M3 depth 15

Silicon coating

33

31

18

F.P.C.

110

22

12

70

10 50 10

6 6

Silicon coating

Coating width : 22 at maximum.

7±0.05

12 400

4-M3 Through

tapped hole

φ3.2, 4-cores 40 cm shielded

cable directly attached.

12

Loading

direction

20

http://www.minebea-mcd.com http://www.minebea-mcd.com

21

● Middle capacity load cell.

● Suitable for thin weighing scale. NTEP / OIML certification.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Material :

Outlines

< Table of Parts No. >

Parts No. Rated Capacity Weight

(Approx.g)

C2G1-A Series - Load Cell for Electronic Scale

(Unit : mm)

CB004 Series - Load Cell for Electronic Scale

Specifications

Features

Outlines

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Durability :

< Table of parts No. >

+30

-20

Unit : mm

58.84 N {6 kgf} ~ 490.3 N {50 kgf}

150 %R.C.

200 %R.C.

2 mV/V±0.2 mV/V

0.015 %R.O.

0.015 %R.O.

0.02 %R.O.

0.02 %R.O. /20 min

0.02 %R.O. /20 min

12 V or less

20 V

±0.1 mV/V

420 Ω Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V) (between bridge and body)

- 10 ℃ ~ 50 ℃

- 10 ℃ ~ 50 ℃

0.04 %R.O./10 ℃

0.012 %LOAD/10 ℃

φ3.2, 4-cores shielded 40 cm cable directly attached.

IP64

Aluminium

200

Natural Freq.

(Hz)

220

295

323

360

373

417

455

493

540

Displacement

0.62

0.53

0.65

0.67

58.84 N {6 kgf}

98.07 N {10 kgf}

117.7 N {12 kgf}

147.1 N {15 kgf}

196.1 N {20 kgf}

245.2 N {25 kgf}

294.2 N {30 kgf}

343.3 N {35 kgf}

490.3 N {50 kgf}

C2G1-6K-A

C2G1-10K-A

C2G1-12K-A

C2G1-15K-A

C2G1-20K-A

C2G1-25K-A

C2G1-30K-A

C2G1-35K-A

C2G1-50K-A

● Middle capacity.

Parts No. Rated Capacity Weight

(Approx.g)

(Unit : mm)

Unit : mm

98.07 N {10 kgf} ~ 980.7 N {100 kgf}

150 %R.C.

200 %R.C.

2 mV/V±0.2 mV/V

0.015 %R.O.

0.015 %R.O.

0.02 %R.O.

0.02 %R.O. / 20 min

0.02 %R.O. / 20 min

12 V or less

20 V

±0.1 mV/V

420 Ω Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V) (between bridge and body)

- 10 ℃ ~ 50 ℃

- 10 ℃ ~ 50 ℃

0.04 %R.O./10 ℃

0.012 %LOAD/10 ℃

φ3.2, 4-cores shielded 40 cm wire directly attached.

Cable end is separated.

IP64

Aluminium

350

360

370

380

390

Natural Freq.

(Hz)

160

200

230

250

270

300

330

380

480

Displacement

98.07 N {10 gf} 0.55

147.1 N {15 kgf}

196.1 N {20 kgf}

245.2 N {25 kgf}

294.2 N {30 kgf}

343.2 N {35 kgf}

441.3 N {45 kgf}

588.4 N {60 kgf}

980.7 N {100 kgf}

CB004-10K

CB004-15K

CB004-20K

CB004-25K

CB004-30K

CB004-35K

CB004-45K

CB004-60K

CB004-100K

+30

-20

Lazer Marking Silicon Coating 2.5 at max.

30

12

15

106 12

130

Silicon Coating 22

Cable

25 25

(8)

15

80

23 at max of coating width.

4-M6 Tap Heat shrinkable

tube

Heat shrinkable tube

7

Loading

direction

50

400

6 19±0.1

150

33 Silicon coating

19±0.1 6

33 25

40

4-M6 depth 15

Loading

direction

● OIML certified.

● Middle capacity load cell. ● Tall profile ● OIML certified.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Material :

Outlines

< Dimension table >

Parts No. Rated Capacity Weight

(Approx.g)

U2D1 Series - Load Cell for Electronic Scale

(Unit : mm)

CB14-21 Series - Load Cell for Electronic Scale

Specifications

Features

Outlines

Rated capacity :

Safe overload :

Ultimated overload :

Rated output :

Non-linearity :

Hysteresis :

Repeatability :

Creep :

Creep recovery :

Recomended excitation :

Maximum excitation :

Zero balance :

Input resistance :

Output resistance :

Insulation resistance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Material :

< Dimension table >

+30

-20

U2D1-3K ~ 20K

U2D1-25K ~ 50K

130

13.4

1 1

26

18

2 x 2 -M5 depth 8

2 x 2 -M4 depth 7

Loading side Mounting side

12 8

23 24

23 24

70

66 2 2

2 x 2 -M6 depth 10 23 24

Loading side

130

13.4

1 1

70

66 2 2

Mounting side23 24

30

38

Unit : mm

29.42 N {3 kgf} ~ 980.7 N {100 kgf}

200 %R.C.

300 %R.C.

2 mV/V±0.2 mV/V

0.015 %R.O.

0.015 %R.O.

0.02 %R.O.

0.02 %R.O. /20 min (U2D1-3K : 0.03 %R.O. /20 min)

0.02 %R.O. /20 min (U2D1-3K : 0.03 %R.O. /20 min)

12 V or less

20 V

±0.1 mV/V

420 Ω Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V) (between bridge and body)

- 10 ℃ ~ 50 ℃

- 10 ℃ ~ 50 ℃

0.04 %R.O./10 ℃

0.012 %LOAD/10 ℃

φ3.2, 4-cores shielded 40 cm cable directly attached.

Cable end is separated.

IP40

Aluminium

350

550

800

Natural Freq.

(Hz)

95

140

180

230

280

550

550

340

Displacement

0.48

0.45

0.41

0.38

0.56

0.61

0.53

29.42 N {3 kgf}

58.84 N {6 kgf}

98.07 N {10 kgf}

147.1 N {15 kgf}

196.1 N {20 kgf}

245.2 N {25 kgf}

490.3 N {50 kgf}

980.7 N {100 kgf}

U2D1-3K

U2D1-6K

U2D1-10K

U2D1-15K

U2D1-20K

U2D1-25K

U2D1-50K

U2D1-100K

● Middle capacity.

Parts No. Rated Capacity Weight

(Approx.kg)

(Unit : mm)

Unit : mm

980.7 N {100 kgf} ~ 4.903 kN {500 kgf}

150 %R.C.

200 %R.C.

2.2 mV/V±0.11 mV/V

0.02 %R.O.

0.02 %R.O.

0.02 %R.O.

0.02 %R.O. / 20 min

0.02 %R.O. / 20 min

12 V or less

20 V

±0.11 mV/V

405 Ω±10 Ω

350 Ω±5 Ω

2 000 MΩ or more (DC50 V) (between bridge and body)

- 10 ℃ ~ 50 ℃

- 10 ℃ ~ 70 ℃

0.05 %R.O./10 ℃

0.02 %LOAD/10 ℃

φ4.7, 4-cores shielded 164.5 cm wire directly attached.

Cable end is separated.

IP64

Aluminium

1.3

Natural Freq.

(Hz)

84

90

127

150

260

Displacement

980.7 N {100 kgf} 0.5

1.471 kN {150 kgf}

2.452 kN {250 kgf}

2.942 kN {300 kgf}

4.903 kN {500 kgf}

CB14-100K-21

CB14-150K-21

CB14-250K-21

CB14-300K-21

CB14-500K-21

8 12

● OIML certified.

19

30

50

50

30

7

7 19

50

Silicon coating

42.5 42.5 174

8 - M8 depth 20

Cable

65

22

http://www.minebea-mcd.com http://www.minebea-mcd.com

23

Load Cells

490.3 kN {50 tf}

~ 2.942 MN {300 tf}

150

200

2±0.02

0.3

0.3

0.15

- 10 ~ 70

- 20 ~ 100

0.05 %R.O./10℃

0.1 %LOAD/10℃

φ10, 4-cores shielded 3 m cable

with Y type terminals at the end.

Alloy steel

IP64

Ideal for measuring the tension

force of cable in crane

applications.

High accuracy small and light

weight tension / compression

service. NTEP approved.

Compact size and light weight.

tension / compression service

with all stainless steel

construction.

High capacity. Because the

output voltage is adjusted, it is

available in both single point /

multipoint. OIML certified.

Rated capacity

Safe overload

Ultimate overload

Rated output

Non-linearity

Hysteresis

Repeatability

Compensated temp. range

Safe temp. range

Temp. effect on zero balance

Temp. effect on output

Cable

Material

Protection grade

29.42 kN {3 tf}

~ 196.1 kN {20 tf}

200

500

(CLS-20T-A : 300)

1±0.01

0.2

0.2

0.1

- 20 ~ 60

- 30 ~ 70

0.05 %R.O./10℃

0.05 %LOAD/10℃

φ10, 4-cores shielded 5 m cable

with Y type terminals

Alloy steel

IP64

980.7 kN {100 kgf}

~ 49.03 kN {5 tf}

150

200

- 3±0.003

3±0.015

0.025

0.025

0.025

- 10 ~ 70

- 20 ~ 80

0.05 %R.O./10℃

0.02 %LOAD/10℃

φ4.7, 4-cores shielded 6 m cable

with Y type terminals

Alloy steel

IP67

490.3 N {50 kgf}

~ 19.61 kN {2 tf}

150

200

2±0.01

0.15

0.1

0.05

- 10 ~ 70

- 20 ~ 80

±0.05 %R.O./10℃

±0.1 %LOAD/10℃

φ6.3, 4-cores shielded 3 m cable

directly attached.

Stainless steel

IP67

980.7 kN {100 kgf}

~ 7.845 kN {800 kgf}

150

200

2 0

0.02

0.02

0.02

- 10 ~ 50

- 20 ~ 70

0.05 %R.O./10℃

0.02 %LOAD/10℃

φ6.3, 4-cores shielded 6 m cable

with Y type terminals

Aluminium

IP65

CLS-A U3S1-NS UMM1 C2D1

Tension Service

/ Tension-Compression

Service

for Industrial Scale

(%R.C.)

(%R.C.)

(mV/V)

(%R.O.)

(%R.O.)

(%R.O.)

(℃)

(℃)

*Rod end is optional.

Used in weighing systems for

required high capacity generally.

*Rod end is optional.

Compression Service

/ Tension service

for Industrial Scale

CCS1 CWV1 TCP1(A) T3B1

Low profile, Shearweb type load

cell. It is strong in lateral load.

Suitable to use in the limited

space.

High accuracy canister type load

cell. Suitable for Tank or Hopper

weighing systems.

High accuracy, compact and light

weight load cell for process

weighing systems.

(%R.C.)

(%R.C.)

(mV/V)

(%R.O.)

(%R.O.)

(%R.O.)

(℃)

(℃)

*Rod end is optional.

19.61 kN {2 tf}

~ 980.7 kN {100 tf}

150

200

3±0.006

0.05 (CWV1-50T~100T : 0.1)

0.1

(CWV1-50T~100T : 0.15)

0.02

(CWV1-50T~100T : 0.05)

- 10 ~ 70

- 20 ~ 80

0.03 %R.O./10℃

0.03 %LOAD/10℃

φ10, 4-cores shielded 3 m cable

with Y type terminals at the end.

Alloy steel

IP64

490.3 kN {50 kgf}

~ 196.1 kN {20 tf}

150

(TCP1-50K ~ 100K : 500)

200

(TCP1-50K ~ 100K : 500)

3±0.003

0.05

0.02

(TCP1-50K ~ 100K : 0.05)

0.02

(TCP1-50K ~ 100K : 0.05)

- 10 ~ 70

- 20 ~ 100

0.03 %R.O./10℃

0.03 %LOAD/10℃

φ10, 4-cores shielded 3 m cable

with Y type terminals at the end.

Alloy steel

IP64

196.1 N {20 kgf}

~ 49.03 kN {5 tf}

150

200

3±0.015

0.03

0.03

0.03

- 10 ~ 70

- 20 ~ 80

0.05 %R.O./10℃

0.1 %LOAD/10℃

φ10, 4-cores shielded 3 m cable

with Y type terminalsat the end.

Alloy steel (20K~200K: Aluminium)

IP64

Rated capacity

Safe overload

Ultimate overload

Rated output

Non-linearity

Hysteresis

Repeatability

Compensated temp. range

Safe temp. range

Temp. effect on zero balance

Temp. effect on output

Cable

Material

Protection grade

+0.004

0

Load Cells

Rated capacity

Safe overload

Ultimate overload

Rated output

Non-linearity

Hysteresis

Repeatability

Compensated temp. range

Safe temp. range

Temp. effect on zero balance

Temp. effect on output

Cable

Material

Protection grade

Compression Service

/ Tension Service

for Industrial Scale

Highly accurate load cell for

multipoint method platform type

weighing scale.

High accuracy, double convex,

hermetically sealed canister type

load cell. OIML certified.

Digital load cell with output of

1 000 000 count. Error factor is

decreased by the internal amplifier.

CE mark applicable. OIML certified.

Stainless steel.

2 type of half and full bridge type.

Rated capacity

Safe overload

Ultimate overload

Rated output

Non-linearity

Hysteresis

Repeatability

Compensated temp. range

Safe temp. range

Temp. effect on zero balance

Temp. effect on output

Cable

Material

Protection grade

2.942 kN {300 kgf}

~ 68.65 kN {7 tf}

150

200

2±0.002

0.025

0.025

0.025

- 10 ~ 50

- 20 ~ 70

0.05 %R.O./10℃

0.2 %LOAD/10℃

φ6.3, 4-cores shielded 6 m cable

directly attached with Y type terminals

Aluminum

(C2T1-7T: Alloy steel)

IP64

98.07 kN {10 tf}

~ 294.2 kN {30 tf}

150

200

2±0.002

0.02

0.02

0.01

- 10 ~ 50

- 20 ~ 70

0.013 %R.O./10℃

0.010 %LOAD/10℃

φ7, 6-cores shielded 12 m cable

cable end is separated.

Element: Alloy steel

Cover: Stainless steel

IP68

98.07 kN {10 tf}

~ 294.2 kN {30 tf}

150

200

1 000 000 count±500 count

0.02

0.02

0.01

- 10 ~ 50

- 20 ~ 70

0.013 %R.O./10℃

0.010 %LOAD/10℃

φ7, 4-cores shielded 12 m cable

cable end is separated.

Element: Alloy steel

Cover: Stainless steel

IP68

44.48 N {10 lb}

~ 177.9 N {40 lb}

150

250

0.9~2.0 ± 0.105~0.300

0.15

0.15

0.05

- 10 to 50

- 40 to 65

0.108 %R.O./10℃

0.360 %LOAD/10℃

(FSA-5L(-L) : 0.540 %LOAD/10℃)

-

Stainless steel

IP64

Aluminum alloy.

Full bridge type single point load

cell.

Aluminum alloy.

Full bridge type single point load

cell.

4.903 N {0.5 kgf}

~ 147.1 kN {5 kgf}

450

-

0.5±0.05

(FSU-0.5K : 0.5 mV/V±0.075 mV/V)

0.1

0.1

0.1

0 ~ 60

- 10 ~ 80

1 %R.O./10℃

1 %LOAD/10℃

AWG 30, 150 mm directly

attached, cable end is separated.

Aluminium

-

19.61 N {2 kgf}

~ 196.1 kN {20 kgf}

150

-

- 1.58±0.158

~ - 2.14±0.214

0.05

0.05

0.05

- 10 ~ 50

- 10 ~ 50

1 %R.O./10℃

1 %LOAD/10℃

AWG30, 30 cm cable

and cable end is separated.

Aluminium

-

C2T1(-A) CC002 DC002 FSA

FSU FSI CB004S CB063

Tension Service

/ Tension-Compression

Service

for Industrial Scale

(%R.C.)

(%R.C.)

(mV/V)

(%R.O.)

(%R.O.)

(%R.O.)

(℃)

(℃)

(%R.C.)

(%R.C.)

(mV/V)

(%R.O.)

(%R.O.)

(%R.O.)

(℃)

(℃)

Tall profile stainless steel

structure. Suitable for large size

platform scale. IP67 for protection

grade. OIML certified.

Low profile, and suitable for high

capacity thin type weighing scale.

IP67 for protection grade.

OIML certified.

98.07 N {10 kgf}

~ 980.7 kN {100 kgf}

150

200

2.0±0.2

0.025

0.025

0.020

- 10 ~ 50

- 10 ~ 50

0.04 %R.O./10℃

0.012 %LOAD/10℃

φ4.7, 4-cores shielded 5 m,

and cable end is separated.

Stainless steel

IP67

490.3 N {50 kgf}

~ 2.942 kN {300 kgf}

150

200

2.0±0.2

0.015

0.015

0.02

- 5 ~ 35

- 10 ~ 50

0.020 %R.O./10℃

0.012 %LOAD/10℃

φ4.7, 4-cores shielded 40 cm,

and cable end is separated.

Aluminum

IP67

24

http://www.minebea-mcd.com http://www.minebea-mcd.com

25

Mounting Attachment with Slide Stop Mechanism

Flexible stop

/ Rocker Pin

method

Flexible stop method mounting attachment.

Suitablefor tank and hopper with stir

machine.

Steel ball method mounting attach -ment.

High horizontal intensity. Suitable to use for

at severe terms such as belt conveyer scale

and hopper legs.

Flexible stop method mounting attachment.

The load cell of explosion-proof construction can be installed.

Applicable load cell

Allowable horizontal load

Allowable horizontal moving length

Allowable lifting load

Material

CMM1-50K ~ 2T,

CMP1-250K ~ 20T

FCA-CMM1-50K/2T-S,

FCA-CMP1-250K/2T-S : ±11.77 kN {1.2 tf}

FCA-CMP1-5T-S : ±29.42 kN {3 tf}

FCA-CMP1-10T-S : ±58.84 kN {6 tf}

FCA-CMP1-20T-S : ±117.7 kN {12 tf}

±10 mm (Directionality)

-

Stainless steel

(Rod end is stainless painting.)

CMM1-50K~2T,

CMP1-250K~20T

SCA-CMM1-50K~2T : ±29.42 kN {3 tf}

SCA-CMP1-250K/5T, -10T : ±98.07 kN {10 tf}

SCA-CMP1-250K/5T-S, -10T-S : ±58.84 kN {6 tf}

SCA-CMP1-20T-S : ±117.7 kN {12 tf}

±10 mm (Directionality)

SCA-CMM1/CMP1-*-S : 19.61 kN {2 tf}

SCA-CMP1-*-S : 49.03 kN {5 tf}

SCA-CMM1/CMP1 : Alloy steel(Plating surface)

SCA-CMM1/CMP1-S : Stainless steel

CCP1(A) -50K~20T(-U, -Z)

FCA-CCP1-50K/100K,

FCA-CCP1-200K/1T : ±5.884 kN {600 kgf}

FCA-CCP1-2T/5T : ±29.42 kN {3 tf}

FCA-CCP1-10T : ±58.84 kN {6 tf}

FCA-CCP1-20T : ±117.7 kN {12 tf}

±10 mm

-

Alloy steel (Plating surface)

Applicable load cell

Allowable horizontal load

Allowable horizontal moving length

Allowable lifting load

Material

Rocker pin method mounting attach -ment.

Low cost and space saving. There is no

restriction for arrangement.

Rocker pin method mounting attachment.

Low cost and space saving. All stainless

structure.

C3B1-200K~5T-NS

30 %R.C. *1)

±2 mm (No directionality)

19.61 kN {2 tf} (Fall prevention)

Alloy steel (Plating surface)

C2B1B-250K ~ 2T

30 %R.C. *1)

±2 mm (No directionality)

19.61 kN {2 tf} (Fall prevention)

Stainless steel

RCA-C3B1 RCA-C2B1B-S

＊1) R.C. = RATED CAPACITY of applied load cell.

Flexible stop

/ Slide stop

method

FCA-CMM1-S

FCA-CMP1-S FCACC010-*B(S) SCA-CMM1

SCA-CMP1(-S)

FCA-CCP1

Flexible stop method mounting attachment.

Equipped with lift-off protection fitting.

CC010-500K~50T

FCACC010-3B*(S) : ±29.42 kN {±3 tf}

FCACC010-6B*(S) : ±58.84 kN {±6 tf}

FCACC010-12B*(S) : ±117.7 kN {±12 tf}

±8 mm (Directionality)

FCACC010-3B*S : 29.42 kN {±3 tf}

FCACC010-6B*S : 58.84 kN {±6 tf}

FCACC010-12B*S : 117.7 kN {±12 tf}

FCACC010-B : Alloy steel

FCACC010-BS : Stainless steel

< Asking for patent >

Check Rod

method

Check rod method mounting attach -ment.

All stainless construction. Equipped with Lift-off protection fitting.

CC010-500K ~ 50T

CCACC010-3B*(S) : ±29.42 kN {±3 tf}, CCACC010-6B*(S) : ±58.84 kN {±6 tf}

CCACC010-12B*(S): ±117.7 kN {±12 tf}, CCACC010-30B*(S): ±294.2 kN {±30 tf}

±3 mm (No directionality)

(Same as allowable horizontal load)

Stainless steel (Available alloy steel as an option.)

Applicable load cell

Allowable horizontal load

Allowable horizontal moving length

Allowable lifting load

Material

CCACC010-B(S)

＊1) R.C. = RATED CAPACITY of applied load cell.

Japanese PAT No.4422099

Check rod method mounting attach -ment.

All stainless construction. Equipped with Lift-off protection fitting.

CBE1-5K ~ 200T(-U)

±1.961kN {±0.2tf}

±3 mm (No directionality)

(Same as allowable horizontal load)

Stainless steel

CCACBE1-S

Special specifications

(See list at left side)

Connection 2 : Connector

Mounting thread

3 : 3/8 Male screw

Mounting thread (shape) 1 : G (PF)

Output 1 : 4 mA ~ 20 mA

3 : 0 V ~ 10 V

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Accuracy :

Rated output :

Frequency Response :

Power supply voltage :

Power consumption :

Insulation registance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Connector :

Protection grade :

Material of cover :

Material of diaphragm :

Tightening torque :

Weight :

Outlines

< Accessories >

< Option >

SOS type Pressure Transmitter NS100A series

Copper gasket 1 piece

Cable with plug (CAC-156-*M)

Instruction manual 1 sheet

Inspection data sheet 1 sheet

< Model Composition >

< Table of model No. >

< Special specifications >

A01 :

D6 :

H :

S70 :

CE :

DR :

Accurate model. Accuracy : 0.1 %R.O.

Power supply voltage ±DC15 V

Allow the minus voltage output at negative pressure side and

accuracy 0.2 %R.O. is guaranteed.

For high temperature model with separate amplifier type.

(Temperature of pressure media : up to 200 ℃, Accuracy:0.5 %R.O.)

IP67 as a protection grade, and zero point adjustment is equipped.

CE marking applicable.

Drain cock is equipped.

< NS100 series >

NS102: φ10 of pressure inlet hole. Accuracy : 0.5 %R.O.

Connector

R03-RB5F

Unit : mm

Mounting thread

G{PF}3/8

Cable with plug CAC-156-**M (Option)

(R03-PB5M φ4.7, 4-cores shielded cable)

77

32 3 18 8 48 9.5

φ3 pressure inlet hole

● Accuracy 0.2 %R.O.

Accuracy of 0.1 %R.O. is available as high accuracy

version. (including non-linearity, hysteresis and repeatability)

● Negative pressure (Compound pressure) and absolute

pressure can be measured.

● Application :

Automatic transmission test stand.

Test system for solenoid valve and valve body.

Test system for air conditioning system.

Precision machine pneumaticity operation control.

Approx. 60 units/1 plane are adopted for HIIA rocket.

* Unavailable to the corrosive fluid and water/steam.

NS100A - * * * * * - * - * 1 3 2 **

Rated capacity

200KP : 200 kPa

500KP : 500 kPa

1MP : 1 MPa

2MP : 2 MPa

5MP : 5 MPa

10MP : 10 MPa

20MP : 20 MPa

25MP : 25 MPa

30MP : 30 MPa

35MP : 35 MPa

50MP : 50 MPa

(No sign) :

A :

F :

Gage pressure

Absolute pressure

Negative (Compound)

Pressure

Model No.

NS100A-200KP*-*132

NS100A-500KP*-*132

NS100A-1MP*-*132

NS100A-2MP*-*132

NS100A-5MP*-*132

NS100A-10MP*-*132

NS100A-20MP*-*132

NS100A-25MP*-*132

NS100A-30MP*-*132

NS100A-35MP*-*132

NS100A-50MP*-*132

Rated Capacity

200

500

1

2

5

10

20

25

30

35

50

kPa

kPa

MPa

MPa

MPa

MPa

MPa

MPa

MPa

MPa

MPa

＊Please check separately about voltage output (0 V ~ 5 V), a mounting

thread (1/8, 1/4), a thread shape (R {PT}) and cable attached directly

or terminal box.

＊Please check pressure media when investigating pressure sensor

because it may not match the usage.

200 kPa ~ 50 MPa

200 %R.C.

300 %R.C.

0.2 %R.O.

(including non-linearity, hysteresis and repeatability.)

Current : 4 mA ~ 20 mA (Load resistance : 500 Ω or less)

Voltage : 0 V ~ 10 V (Load resistance : 5 kΩ or more)

1 kHz

DC24 V (18 V ~ 28 V)

Approx. 20 mA

1 000 MΩ or more ( at DC50 V)

- 20 ℃ ~ 70 ℃

- 30 ℃ ~ 80 ℃

0.2 %R.O./10 ℃

0.2 %LOAD/10 ℃

R03-RB5F with receptacle

IP44

Aluminum with almite treatment

Single crystal sapphire

20 N･m ~ 40 N･m

Approx. 200 g (main body only)

26

http://www.minebea-mcd.com http://www.minebea-mcd.com

27

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Accuracy :

Rated output :

Input/output resistance :

Recomended excitation :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Mounting screw :

Cable :

Protection grade :

Weight :

Outlines Rated capacity

SOS type pressure sensor NS10T series

SOS type pressure sensor NS30T series

< Accessories >

Copper gasket

Inspection data sheet

Drain cock

Teflon gasket for drain cock

1 piece

1 piece

1 piece

1 piece

Even if the temperature compensation

range is exceeded, a normal measurement is possible up to safe temperature

range. Standard sensor have limited the

confirmation of the temperature characteristic to -20 ℃ ~ 120 ℃.

< Model composition >

NS10T - ＊＊＊＊ ＊ (-＊＊)

Rated capacity

200KP : 200 kPa

500KP : 500 kPa

1MP : 1 MPa

2MP : 2 MPa

5MP : 5 MPa

10MP : 10 MPa

20MP : 20 MPa

30MP : 30 MPa

35MP : 35 MPa

50MP : 50 MPa

None:

A:

F:

Gage pressure

Absolute pressure

Negative (Compound) pressure

Options

A01:

CP:

CJ:

Y:

High accuracy model

(200KP ~ 20MP)

Plug connector at cable end

(P/No.PRC03-12A10-7M)

Jack connector at cable end

(P/No.PRC03-32A10-7F)

Y-type terminal lugs

at cable end.

Even if the temperature compensation

range is exceeded, a normal measurement is possible up to safe temperature

range. Standard sensor have limited the

confirmation of the temperature characteristic to -20 ℃ ~ 120 ℃.

Unit : mm

200 kPa ~ 50 MPa

200 %R.C.

300 %R.C.

0.2 %R.O. / 0.1 %R.O. (High accuracy model)

(including non-linearity, hysteresis and repeatability.)

1.5 mV/V±0.15 mV/V (200KP/500KP: 1.0 mV/V±0.10 mV/V)

700 Ω ~ 1 000 Ω

DC10 V (15 V at maximum)

- 20 ℃ ~ 120 ℃ (Special model: - 40 ℃ ~ 150 ℃)

- 40 ℃ ~ 160 ℃

0.2 %R.O./10 ℃

0.2 %LOAD/10 ℃

G3/8 {PF}

φ3.8, shielded 3 m high temperature cable directly

attached, and cable end is separated.

IP55

Approx.200 g (for main body only)

Natural Freq.

(kHz)

72

90

119

152

406

566

813

900

988

1 278

200 kPa

500 kPa

1 MPa

2 MPa

5 MPa

10 MPa

20 MPa

30 MPa

35 MPa

50 MPa

71

32 3 18 8 42

Drain cock

φ3 Pressure inlet hole Mounting screw G3/8

φ3.8 4-cores shielded

3 m high temperature cable

5

● Compact (φ16x40 mm) and light weight (Approx.50 g).

● Accuracy 0.2 %R.O./0.1 %R.O. (High accuracy version)

● Compound pressure (-100 kPa ~ each rated capacity)

is measurable.

● Low pressure (0~200 kPa, 0~500 kPa) is measurable.

● Available for high and low temperature.

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Accuracy :

Rated output :

Input/output resistance :

Recomended excitation :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Mounting screw :

Cable :

Protection grade :

Weight :

Outlines

Rated capacity

< Accessories >

Inspection data sheet 1 piece

< Model composition >

NS30T - ＊＊＊＊ ＊ (-＊＊)

Rated capacity

200KP : 200 kPa

500KP : 500 kPa

1MP : 1 MPa

2MP : 2 MPa

5MP : 5 MPa

10MP : 10 MPa

None:

F:

Gage pressure

Negative (Compound) pressure

Options

A01:

CP:

CJ:

Y:

High accuracy model

Plug connector at cable end

(P/No.PRC03-12A10-7M)

Jack connector at cable end

(P/No.PRC03-32A10-7F)

Y-type terminal lugs

at cable end.

Unit : mm

200 kPa ~ 10 MPa

200 %R.C.

300 %R.C.

0.2 %R.O. / 0.1 %R.O. (High accuracy model)

(including non-linearity, hysteresis and repeatability.)

1.5 mV/V±0.15 mV/V

(200KP/500KP: 1.0 mV/V±0.10 mV/V)

700 Ω ~ 1 000 Ω

DC10 V (15 V at maximum)

- 20 ℃ ~ 120 ℃ (Special model: - 40 ℃ ~ 150 ℃)

- 40 ℃ ~ 160 ℃

0.2 %R.O./10 ℃

0.2 %LOAD/10 ℃

R1/8

φ3.8, shielded 3 m high temperature cable directly

attached, and cable end is separated.

IP65

Approx.50 g (for main body only)

Natural Freq.

(kHz)

72

90

119

152

406

566

200 kPa

500 kPa

1 MPa

2 MPa

5 MPa

10 MPa

(43)

14 10 4.5 4

φ15.8

Mounting screw R1/8 φ3 Pressure inlet hole φ3.8 4-cores shielded

3 m high temperature cable

14

● High response (Natural Frequency : 72 kHz~556 kHz).

● Accuracy 0.2 %R.O./0.1 %R.O.(High accuracy version)

● Compound pressure (-100 kPa~ each rated capacity) is

measurable.

● Low pressure (0~200 kPa, 0~500 kPa) is measurable.

● Available for high and low temperature.

● High response (Natural Frequency : 72 kHz~1 278 kHz).

Special specification

Mounting screw

(5 MPa ~ 50 MPa)

G: G3/8 {PT}, R: R3/8 {PF}

(100 MPa)

G: G1/2 {PT}, R: R1/2 {PF}

Output 1 : 4 mA ~ 20 mA

2 : 0 V ~ 5 V

5 : 1 V ~ 5 V

1 : Connector

2 : Cable

http://www.minebea-mcd.com

Specifications

Features

Rated capacity :

Safe overload :

Ultimated overload :

Accuracy :

Rated output :

Frequency Response :

Power supply voltage :

Insulation registance :

Compensated temp. range :

Safe temp. range :

Temp. effect on zero balance :

Temp. effect on output :

Cable :

Protection grade :

Material of diaphragm :

Mounting screw :

Tightening torque :

Weight :

Outlines

< Accessories >

Strain Gage type Pressure Transmitter PRN01/PRN02 series

Inspection data sheet 1 sheet

< Model Composition >

< PRN01 (Connector type) >

Mounting screw: G3/8 or R3/8

φ31 16

2 gap

63

16 10 27.5

G3/8 R3/8

(100MP: G1/2) (100MP: R1/2)

φ9.5 (Pressure inlet)

24

φ27

φ4.7, shielded cable

Hermetic seal

Cover

Connector

Options

CAC-167-**M (Voltage output)

CAC-168-**M (Current output)

< PRN02 (Cable type) >

φ31 16

2 gap 16 10 27.5 (25)

G3/8 R3/8

(100MP: G1/2)(100MP: R1/2)

φ9.5 (Pressure inlet)

24

φ27

φ4.7, shielded cable

Hermetic seal

Cover

Connector

(80) 1 m

(75)

Unit : mm

● Equipped with ASIC (Application Specific I.C.) type

amplifier.

● Pressure sensor with built-in high performance type

amplifier with minimum temperature and noise sensitivity.

● Application :

Injection molding machine, Pressing machine,

Various pumping systems, Hydraulic aparatus.

PRN0 * - * * * * * - * * S*

Rated capacity

5MP : 5 MPa

10MP : 10 MPa

20MP : 20 MPa

35MP : 35 MPa

50MP : 50 MPa

100MP : 100 MPa

● Incorporates a newlydeveloped strain gage with a

stainless steel diaphram with good stability

characteristics and low power consumption.

5 MPa ~ 100 MPa

150 %R.C.

200 %R.C.

±1.0 %F.S.

(including non-linearity, hysteresis and repeatability.)

Current : 4 mA ~ 20 mA

Voltage : 0 V ~ 5 V, 1 V ~ 5 V

1 kHz

DC12 V ~ 28 V

1 000 MΩ or more (at DC50 V)

- 20 ℃ ~ 70 ℃

- 30 ℃ ~ 80 ℃

±1.0 %F.S./-20 ℃ ~ 70 ℃ (PRN01)

±2.0 %F.S./-20 ℃ ~ 70 ℃ (PRN02)

±1.0 %F.S./-20 ℃ ~ 70 ℃ (PRN01)

±2.0 %F.S./-20 ℃ ~ 70 ℃ (PRN02)

φ4.7, 4-cores shielded 1 m cable directly attached,

and cable end is separated.(PRN02)

IP65

Stainless steel

G3/8 {PF}, R3/8 {PT}

(PRN01/02-100MP:G1/2 {PF}, R1/2 {PT}

20 N･m ~ 40 N･m

Approx. 70 g (main body only)

27

28

http://www.minebea-mcd.com http://www.minebea-mcd.com

29

*1) Including non-linearity, hysteresis and repeatability, *2) Including non-linearity, hysteresis, repeatability and temp. effect. *3) Select either of one output

Note) Please ask when you examine the sensor because the pressure medium is unavailable case.

20 M ~ 50 M

150

200

2.0 *2)

4 ~ 20

-

- 25 ~ 350 (Sensing point)

- 25 ~ 400 (Sensing point)

-

-

NS403B: 1/2-20UNF

NS413B: G3/8{PF}

Connector: TC1108-21B10-7F

(Receptacle)

IP54

400

Pressure sensors

with internal

amplifier.

High accuracy (0.1%R.O.) Longterm stability. Automatic transmission testing device / Solenoid

valve testing device

Compact flash diaphragm type

(Bolt shape). High response.

Equipped with drain cock and no

need to remove air from pressure

inlet section.

Uses the newly developed high

stability strain gage. High accuracy

and reliability sensor makes maximum use of the feature of a

metalic foil strain gage.

Rated capacity

Safe overload

Ultimate overload

Accuracy

Rated output *3)

Compensated temp. range

Safe temp. range

Temp. effect on zero balance

Temp. effect on output

Mounting screw

Cable

Protection grade

Weight

500 k ~ 10 M

200

300

0.1 *1)

4 ~ 20

0 ~ 5, 0 ~ 10

- 20 ~ 70

- 30 ~ 80

0.15 %R.O./10 ℃

0.15 %LOAD/10 ℃

G1/8, G1/4, G3/8{PF},

R1/8, R1/4, R3/8{PT}

Connector: R04-R5F (Receptacle)

IP67

250

2 M ~ 20 M

150

200

Non-linearity: 0.5 %R.O.

1.0 mV±0.3 mV

- 30 ~ 150

- 40 ~ 160

±0.8 %R.O./10 ℃

±0.8 %LOAD/10 ℃

M10 x P1.0

φ3.8, 4-cores 30 cm shielded cable

directly attached. Cable end is separated

IP65

25

350 k ~ 1 M

150

-

1.0 *1)

-

0.5 ~ 4.5

0 ~ 60

- 20 ~ 70

±0.8 %F.S./10 ℃

-

R1/4 {PT}

φ3, 4-cores 30 cm shielded cable

directly attached. Cable end is separated

-

-

High reliability and general use

for experimental measurement.

Line-up for wide pressure range.

Flash type diaphragm.

Fast response product.

High / Low temperature usage.

Testing device, transmission, and

various engine stands.

1 ~ 100

150

300 (PRB-100MP：200)

1.5±0.015

(PRB-1MP：1±0.01)

0.2 (PRB-1MP：0.3)

0.2 (PRB-1MP：0.3)

0.3

- 10 ~ 60

- 15 ~ 100

0.2 %R.O./10 ℃

0.2 %LOAD/10 ℃

G3/8{PF} (PRB-100MP : G1/2{PF})

CAC-101-5M (Option)

Connector：NDI-7P-R(Receptacle)

IP64

220 ~ 450

1 ~ 100

150

300

1.5±0.15

(PRC-1MP:1 )

0.5

0.5

0.5

- 10 ~ 50

- 10 ~ 75

0.8 %R.O./10 ℃

0.8 %LOAD/10 ℃

G3/8{PF}

φ6.3, 4-cores 30 cm shielded

cable, and connector(NDI-7P-J)

IP64

120

1 ~ 10

150

300

PRJ-1MP ：1±0.2

PRJ-2MP ：1.5±0.3

PRJ-5MP ~ 10MP ：1.5±0.15

0.3

0.3

0.3

- 40 ~ 150

- 40 ~ 165

0.25 %R.O./10 ℃

0.5 %LOAD/10 ℃

R1/8{PT}

φ5.6 4-cores 1.5 m shielded heatproof cable, and connector (NDI-7P-J)

IP60

45 ~ 60

NS115P PRO

High accurate melt pressure

meter. No push rod and no

mercury. Excellent in temperature

characteristics.

PRN03

Pressure sensors PRB PRC PRJ

High pressure measurement.

Pressure receiving part is an

integration structure with screw.

200 ~ 500

120

120

1±0.002 5

(STD-500MP ：0.75±0.007 5)

0.35 (STD-500MP ：0.5)

0.1

0.05

- 10 ~ 75

- 10 ~ 75

0.09 %R.O./10 ℃

0.09 %LOAD/10 ℃

G1/2{PF} (STD-500MP : G3/4{PF})

φ6.3, 4-cores 3 m shielded cable directly

attached, cable end is Y-type terminals.

IP64

1 400

STD

(Pa)

(%R.C.)

(%R.C.)

(%R.O.)

(mA)

(V)

(℃)

(℃)

(Approx.g)

NS403B/NS413B

((MPa)

(%R.C.)

(%R.C.)

(mV/V)

(%R.O.)

(%R.O.)

(%R.O.)

(℃)

(℃)

(Approx.g)

＋0.2

－0.1

Rated capacity

Safe overload

Ultimate overload

Rated output

Non-linearity

Hysteresis

Repeatability

Compensated temp. range

Safe temp. range

Temp. effect on zero balance

Temp. effect on output

Mounting screw

Cable

Protection grade

Weight

Pressure Sensors

Pressure sensors

Torque Transducers

Rated capacity

Safe overload

Ultimate overload

Rated output

Accurasy of detected value

Excitation, Recomended

Maximum rotation

Safe temp. range

Temp. effect on zero balance

Temp. effect on output

Zero shift by rotation

Temp. shift by rotation

Cable

Protection grade

Weight

Optical

communication

method

Optical transmission method thin flange type

torque transducer.

Optical transmission method thin flange

type torque transducer.

Bearing type torque transducer adopting

the optical transmission method.

Rated capacity

Safe overload

Ultimate overload

Rated output

Accurasy of detected value

Maximum rotation

Safe temp. range

Temp. effect on zero balance

Temp. effect on output

Zero shift by rotation

Cable

Protection grade

Material

Weight

±100 ~ ±10 k

240

400

0 ~ ±10

±0.05 (±0.03 for an accurate version) *1)

TMHFB-100NM ~ -1KNM : 15 000

TMHFB-2KNM, -3KNM : 10 000

TMHFB-5KNM, -10KNM : 6 000

-10 ~ 60

0.05 %R.O./10 ℃

0.05 %LOAD/10 ℃

0.5 %R.O.p-p (at WB=1 kHz)

φ11, 10-cores shielded cable with connector

at the both end. (sold separately as an option.)

IP54

Rotor part : Alloy steel,

Stator part : Alluminium alloy

Rotor part: 3.0 ~ 10.0

Stator part: 2.8 ~ 3.5

±100 ~ ±5 k

240

400

0 ~ ±10

±0.05 (±0.03 for an accurate version) *1)

10 000

(TMOFB-5KNM : 6 000)

-10 ~ 60

0.05 %R.O./10 ℃

0.05 %LOAD/10 ℃

0.5 %R.O.p-p (at WB=1 kHz)

φ11, 10-cores shielded cable with connector

at the both end. (sold separately as an option.)

IP54

Rotor part : Alloy steel,

Stator part : Alluminium alloy

Rotor : 5.2

Stator part : 3.0

±3 k ~ ±5 k

150

200

0 ~ ±10

±0.1

8 000

-10 ~ 80

0.1 %R.O./10 ℃

0.1 %LOAD/10 ℃

0.5 %R.O.p-p (at WB=1 kHz)

φ11, 10-cores shielded cable with connector

at the both end. (sold separately as an option.)

IP40

Rotor part : Alloy steel,

Stator part : Alluminium alloy + Alloy steel

80

The stable performance is obtained because

the driving side and the measuring side are

noncontact by adopting the highly effective

rotary transformer even for the measurement for a long time.

The torque from static state to high speed rotation can be measured by the double bearing

system adopted. Available to coupling with

propeller shaft, etc.directly as strength of radial

and thrust is high by making bearing double.

Compact and light weight. Suitable for

measuring a slight torque.

±10 ~ ±10 k

120

200

1.3±0.26

(TMNR-10NM~20NM : 0.75±0.15)

±0.5 *1)

2

TMNR-10NM~200NM : 10 000

TMNR-500NM~1KNM : 8 000

TMNR-2KNM~5KNM : 5 000

TMNR-10KNM : 4 000

0 ~ 90

0.2 %R.O./10 ℃

0.2 %LOAD/10 ℃

0.3 (TMNR-10NM~1KNM : 0.5)

TMNR-10NM~1KNM : up to 40

TMNR-2KNM~10KNM : up to 50

φ10, 4-cores shielded 5 m cable

IP40

3 ~ 32

±20 N･cm ~ 300 N･cm

120

150

1±0.2

±0.5 *1)

5 V

2 000

0 ~ 60

0.5 %R.O./10 ℃

0.5 %LOAD/10 ℃

-

-

φ6.3, 4-cores shielded 3 m cable with connector

IP40

0.6

TMHFB TMOFB TMOS

TMNR TMNR-ME TMBN

Rotary transformer

method

(N･m)

(%R.C.)

(%R.C.)

(V)

(%R.O.)

(rpm)

(℃)

(Approx.kg)

(N･m)

(%R.C.)

(%R.C.)

(mV/V)

(%R.O.)

(VAC)

(rpm)

(℃)

(%R.O.)

(℃)

(Approx.kg)

±500 ~ ±5 k

120

200

1.3±0.26

±0.2 *1)

4

TMNR-500NM~2KNM : 10 000

TMNR-3KNM : 8 000

TMNR-5KNM : 6 000

0 ~ 90

0.1 %R.O./10 ℃

0.1 %LOAD/10 ℃

0.2

Single bearing side : Up to 40

Double bearing side : Up to 60

φ10, 4-cores shielded 10~30 m cable

IP40

40 ~ 86

*1) Including non-linearity, hysteresis and repeatability.

30

http://www.minebea-mcd.com http://www.minebea-mcd.com

31

Model no. Page Sampling speed

/Response freq. I/O function

CSD-401

CSD-581-15

CSD-581-74

CSD-701B

CSD-702

CSD-814B(-U)

CSD-815B

CSD-819C

CSD-891B

CSD-903

CSD-904

CSD-912

TMD-100

CSA-503C

CSA-504S*

CSA-507C

CSA-521

CSA-522B

CSA-562B

15 times/s

100 times/s

100 times/s

20 times/s

20 times/s

100 times/s

100 times/s

2 000 times/s

200 times/s

200 times/s

15 times/s

1 000 times/s

100 times/s

10 Hz

10 Hz

1 kHz

1 kHz

25 kHz

1 kHz

36

37

37

37

37

33

35

34

37

31

37

32

37

38

38

38

38

38

38

5 points

-

-

2 points

2 points

4 points

3 points

5 points

5 points

4 points

2 points

6 points

-

-

-

-

-

-

-

Current output Voltage output BCD output CONTROL I/O Comparison output RS-232C I/F RS-422 I/F RS-485 I/F Serial I/F CC-LINK

Non-linearity

(%F.S.)

-

0.01

0.01

0.05

0.01

0.025

0.01

0.01

0.01

0.01

0.1

0.01

0.02

0.02

0.005

0.01

Nos. of comparision output

Digital Indicators Transmitters

Display : 0.05

Output : 0.1

Display : 0.01

Output : 0.05

PROFIBUS I/F

For digital load cell

P.C. Board type

Digital Peak Holder

Built-in Control panel

Graphic indicator

For Tension meter

P.C.board type

P.C.board type

for torque transducer

High response

Compact Size

Compact Size

Selection Table of Instrumentations

P.C. Board type

CSA-504SB

0.1

CSA-504S-1B

0.05

(can increase by an option)

Digi-switch I/F

● Best for high accuracy (6 000 div.) scale applications.

(at the input of 0.6 μV/d or more)

● The FLVFD (Front Luminous Vacuum Fluorescence

Display) type fluorescence display tube of 11.55 mm

character height provides good visibility to main display.

● Equipped with a serial interface and RS-485 interface

as a standard.

● CE mark applicable.

● IP65 as a protection rating.

Specifications

Features

Bridge Power supply :

Applicable transducer :

Input sensitivity :

Input range :

Zero adjustment range :

Non-linearity :

Temperature coefficient :

Input noise :

Analog filter :

A/D sampling rate :

A/D internal resolution :

Main display

Display range :

Display unit :

Over display :

A/D value over display :

Sub display

Display range :

Display unit :

Display contents :

Status display :

Display rate :

External control input :

External control output :

Set value :

No. of set point :

Set value of hysteresis data :

Direction of hysteresis :

Conversion rate :

:

Operating Temp. range :

Humidity :

Power supply :

Power consumption :

Weight :

Protection grade :

Outlines

< Accessories >

< Options >

Digital Indicator CSD-903

Instruction manual 1 pad

Current output

CSD-903-07 (DC4 mA ~ 20 mA)

Voltage output

CSD-903-25 (DC0 V ~ 10 V)

Time lag fuse 1 piece

I/O connector for external control signal 1 piece

Standard communication connector 1 piece

Short bar between A ~ F and C ~ G 1 piece

Panel mount gasket 2 pieces

Connector for BCD output

(When BCD output is equipped.) 1 piece

Connector for CC-Link interface

(When CC-Link interface is equipped.)

1 piece

Instruction manual for CC-Link interface

(When CC-Link interface is equipped.)

1 pad

BCD output

CSD-903-15

CC-Link interface

CSD-903-73

RS-232C interface

CSD-903-74

RS-422 / RS-485 interface

CSD-903-76

* Only either of one can be mounted.

Specifications for Analog

Specifications for Digital

Comparator function

Various functions

General specifications

Unit : mm

144 10.2 136.5 (14)

Cutting size for panel mount

72

68

138 +1

0

+0.1

0

DC10 V±0.5 V within 180 mA (Changeable to DC5 V or

DC2.5 V), with remote sensing function

Up to 6 units of strain gage applied transducers (350 Ω)

0.2 μV/d or more (d = minimum scale)

-3.1 mV/V ~ 3.1 mV/V

±2.5 mV/V

0.01 %F.S.

Zero ±0.2 μV/℃, Sensitivity ±0.001 5 %F.S./℃

(When the calibration is set at 0.2 μV/d or more for

input sensitivity.)

±0.2 μVp-p at maximum (When the analog filter, the

digital filter and the stabilization filter are set to default.)

Selectable from 2 Hz, 4 Hz, 6 Hz, 8 Hz or 10 Hz

200 times/s (Changeable to 20 times/s)

24 bits

- 999 999 ~ 999 999

7 segment green colored fluorescent display tube with

7 digits and 11.55 mm character height

‘-OL’ at minus over, ‘OL’ at plus over.

‘-OVF’ at minus over, ‘OVF’ at plus over.

Accumulation value : -19 999 999 ~ 99 999 999

Accumulation times : 0 ~ 999 999

7-segment green colored fluorescent display tube with

18 digits and 5 mm character height.

Changeable to no display, accumulation times

/accumulation value, latest accumulated data /

accumulation value, accumulation times / latest

accumulated data, latest accumulated data / final,

accumulation times / final, final / accumulation value,

final / over / under or zero band / final.

* it displays ‘weighing value + unit’ during the set of function.

STABLE, PRESET TARE, TARE, GROSS, NET, ZERO,

HOLD, ERROR, Z-BAND, F.FLOW/S1, M.FLOW/S2,

D.FLOW/S3, OVER/S4, OK/S0, UNDER, FULL

4 times/s (Changeable to 20 times/s)

9 functions in the followings can be arbitrarily selected.

OFF, key operation of [ON/OFF], [SET], [ACCUM./ ],

[PRESET TARE/ ], [TARE/▲], [NET/ GROSS/▼], [ZERO]

or [F/ ]. Zero clear, Tare clear, Flow start, Discharge

start, Cancell former accumulation, Clear accumulation,

Error reset, Print command or Emergency stop,

*Above is pulse input, and effective once at a pulse width of 50 ms or more.

Change of Flow/Weigh out (ON: Weigh-out, OFF:

Flow), Hold, Display of NET (ON: NET, OFF: GROSS)

* Above is level input, and effective during short input of 50 ms or more.

13 functions in the followings can be arbitrarily selected.

OFF, RUN, Stable, During tare, Gross display, Net display,

Center of zero, During hold, Error, Capacity exceeded

error, Weighing sequece error, Zero band, OK(S0), Full

flow (S1), Medium flow (S2), Dribble flow (S3), Over (S4),

Under, Full, During weighing, Batch finish, Discharge (for

gate open), Discharge finish (for gate close)

-999 999 ~ 999 999

4 points of S1, S2, S3 and S4

0 ~ 99 digits

Selectable from “On delay” or “Off delay”

Changeable to 200 times/s or 20 times/s

(Synchronous with the A/D sampling rate.)

Zero tracking, Digital filter, Stabilization filter, Calibration

LOCK switch, Digital linearize, Accumulation, Preset tare

-10 ℃ ~ 50 ℃

85 %RH or less (Non condensing)

AC100 V ~ AC240 V (AC85 V ~ AC264 V) 50/60 Hz

Approx. 10 VA (without options, at AC100 V)

Approx. 18 VA at maximum (with options, at AC100 V)

Approx. 1.0 kg (without options)

IP65 (only for the front panel when the attached panel

mount gasket is installed.)

32

http://www.minebea-mcd.com http://www.minebea-mcd.com

33

Specifications

Features

Outlines

Digital Indicator CSD-912

Unit : mm

< Accessories >

< Options >

Bridge Power supply :

Applicable transducer :

Input range :

Zero adjustment range :

Non-linearity :

Temperature coefficient :

Analog filter :

A/D sampling rate :

Display range :

Display unit :

Status display :

Display of set value :

Display of brand :

Display rates :

Accumulation display :

Graphical display :

Internal set value :

External control input :

External control output :

:

Operating Temp. range :

Humidity :

Power supply :

Power consumption :

Weight :

Protection grade :

Specifications for Analog

Specifications for Digital

Various functions

General specifications

192 20 131.5 (18.2)

187+1

0

Cutting size for panel mount

92 +1 0

96

Current output

CSD-912-07 (DC4 mA ~ 20 mA)

Voltage output

CSD-912-25 (DC0 V ~ 10 V)

BCD output

CSD-912-15

RS-232C interface

CSD-912-74

RS-422 / RS-485 interface

CSD-912-76

CC-Link interface

CSD-912-73

PROFIBUS interface

CSD-912-70

● Includes a 6.2 inches STN color liquid crystal touch

panel display with excellent visibility STN color and

wide viewing angle.

● Waveform display of weighing status is available.

● 100 kinds of brands and recipes can be stored in the

internal memory.

● CE mark applicable.

● RS-485 interface and serial interface are equipped

as a standard.

● High speed A/D conversion at 1 000 times/second.

(Internal resolution : 24 bits)

Instruction manual

Time lag fuse

External control I/O connector

Standard communication connector

Short bar for A~F and C~G

Panel mount gascket

BCD output connector

(When BCD output is equipped.)

CC-Link connector

(When CC-Link interface is equipped.)

Instruction manual for CC-Link interface

(When CC-Link interface is equipped.)

Instruction manual for PROFIBUS interface

(When PROFIBUS interface is equipped.)

・

・

・

・

・

・

・

・

・

・

1 pad

1 piece

1 piece

1 piece

2 pieces

1 sheet

1 piece

1 piece

1 pad

1 pad

DC12 V±0.3 V within 140 mA (Changeable to DC6 V or

DC3 V) with remote sensing function

Up to 4 units of strain gage based transducers (350 Ω）

- 3.1 mV/V ~ 3.1 mV/V

±2.5 mV/V

0.01 %F.S.

Zero ±0.1 μV/℃, Sensitivity ±0.000 8 %F.S./℃

(When the calibration is made with the input sensitivity

over 0.3 μV/d)

Approx. 4 Hz (Changeable to 2 Hz, 6 Hz, 8 Hz, 10 Hz

or 100 Hz)

200 times/s (Changeable to 1 000 times/s, 100 times/s,

50 times/s, 20 times/s or 10 times/s)

- 999 999 ~ 999 999

Wide viewing angle 6.2 inches STN color liquid crystal display

No. of dots : 640 x 240 dots, Dot pitch : 0.077 x 0.231 mm

GROSS / NET, TARE, PRE.TARE, STABLE, HOLD, Z-ERR,

RUN, CZ, F.FLOW/S1, M.FLOW/S2, D.FLOW/S3, OVER/S4,

OK, UNDER, FULL, Z-BAND, FINISH, FLOW / DISCH.,

S-COMP / SEQ. / 4-COMP / MEAS. / OUT / MIX

Final, Preliminary-1, Preliminary-2, Over, Under, Free fall

Code No. : 00 ~ 99, Brand name : Up to 15 characters

4 times/s (Changeable to 20 times/s)

Accumulation value : 0 ~ 99 999 999,

Accumulation times : 0 ~ 999 999

Measurement status is displayed in a wavy graph

(EEPROM): Calibration data and the data that relates

to calibration

(SRAM): Dataes for Tare, Zero tracking, Zero set,

Preset tare, Accumulation value / Accumulation times

(Following items can be memorized to Flash ROM):

Brand code set, Recipe set and 4-steps comparator set

11 functions in the followings can be arbitrarily selected.

OFF, Gross/Net, Zero, Zero clear, Tare, Tare clear, Start

of batch / recipe / discharge / mixture, Manual free fall

compensation, Accumulation command, Clear the

former accumulation data, Temporary stop, Restart,

Clear the accumulation data of reading out / all code /

reading out recipe / all mixing code, Forced batch finish,

Forced recipe finish, Forced discharge finish, Error

reset, Print command, Changeover batch / discharge,

Code No. 1~80, Safety input 1~8, Manual full / medium /

dribble flow, Manual discharge / mixing, Hold

11 functions in the followings can be arbitrarily selected.

OFF, Stable, Zero band, Full, Full / Medium / Dribble

flow, Over, OK, Under, Mixing, Discharge, Measurement

/ Recipe / Discharge / Mixing finish, Nozzle down,

During measurement, Weighing sequence error,

Capacity exceeded error, error, During tare, Center of

zero, Gross / Net display, During hold, Hopper 1 ~ 20,

Full flow / Medium flow / Dribble flow of hopper 1 ~ 10

Zero tracking, Digital filter, Stabilization filter, Calibration

lock switch, Degital linearize, Accumulation, Preset tare

0 ℃ ~ 40 ℃

85 %RH or less (Non condensing)

AC100 V ~ AC240 V (AC85 V ~ AC264 V) 50/60 Hz

Approx. 20 VA (without any options, at AC100 V)

Approx. 1.6 kg (without options)

IP65 (only for the front panel when the attached panel

mount gasket is installed.)

● IP65 as a protection rating.

Specifications

Features

Bridge Power supply :

Applicable transducer :

Input range :

Zero adjustment range :

Non-linearity :

Temperature coefficient :

A/D sampling rate :

Input filter :

Display range :

Display unit :

Over display :

Status display :

Setting display :

Judgment display :

Bar meter display :

Display rate :

Decimal point :

External control inut :

Set value :

No. of set points :

Conversion rate :

S1, S2, S3, S4 :

S0 :

RUN :

ERROR :

Specification of contact :

:

Operating Temp. range :

Humidity :

Power supply :

Power consumption :

Weight :

Outlines

Digital Indicator CSD-814B(-U)

< Options >

< High accurate version CSD-814B-U >

Specifications for Analog

Specifications for Digital

Comparator function

Contact output signal

Various functions

General specifications

Current output

CSD-814B-07 (DC4 mA ~ 20 mA)

Voltage output

CSD-814B-23 (DC0 V ~ 1 V)

CSD-814B-24 (DC0 V ~ 5 V)

CSD-814B-25 (DC0 V ~ 10 V)

CSD-814B-26 (DC1 V ~ 5 V)

BCD output

CSD-814B-15

RS-232C interface

CSD-814B-74

RS-422 / RS-485 interface

CSD-814B-76

Serial interface

CSD-814B-77

Digi-switch interface

CSD-814B-78

Instruction manual 1 pad

Midget fuse 1 piece

Unit seal 1 piece

Short bar between A ~ F and C ~ G 1 piece

Connector for BCD output

(When BCD output is equipped.)

1 piece

● 22 mm height clear fluorescent display character.

● The percentage of present loading value compared

to the rated value is displayed by 11 dots of bar meter.

● Equiped with built-in four steps comparators, and

available optional increase upto eight steps.

● Plenty of options for connection with external systems.

● System accuracy 0.05 % is possible even if a barrier

is used for load cell model CC010 series.

● Temperature effect on zero point is ±0.1 μV/℃.

● Set value modification function that measurement is not

interrupted while even changing a comparison set value.

DC10 V±0.3 V within 120 mA (Changeable to DC5 V or

DC2.5 V), with remote sensing function

Up to 4 units of strain gage applied transducers (350 Ω）

F.S setting can be made with the input range from 0.3

mV/V ~ 3 mV/V(When bridge power supply at DC10 V)

±2.4 mV/V

0.01 %F.S.

Zero ±0.2 μV/℃ (±0.1 μV/℃ for high accuracy model)

Sensitivity ±0.001 5 %F.S./℃

100 times/s

4 Hz

- 1 000 ~ 11 000 (Changeable to x 2, x 5 or x 10)

7 segment green colored fluorescent display tube with

22 mm character height

‘-OL’ at minus over, ‘OL’ at plus over.

RUN, A/Z, LOCK, HOLD, CHECK

7-segment fluorescent display tube with 4.5 mm

character height and each 7 digits for S1, S2, S3 and S4

S0, S1, S2, S3 and S4

Percentage of present loading value compared to the

rated value (100 %) by 11 dots bar meter display.

4 times/s

(Changeable to 20 times/s depending on the setting.)

Changeable to no display, 101

, 102

, 103

or 104

.

ZERO, A/Z, A/Z OFF, HOLD, LOCK, A-SEL

- 999 999 ~ 999 999

4 points of S1, S2, S3 and S4

30 times/s

Make the contact shorted when more or less than the

set value for comparision.

Make the contact shorted depend on the condition set

by the function

Make the contact shorted in the measurement mode.

Make the contact shorted when various kinds of

ERRORs are occurred or when power supply is OFF.

1a contact. 1b contact is only for ERROR output

AC125 V 0.1 A, DC30 V 0.5 A

Zero tracking, Digital filter, Motion detect, Change

target for load display, Change target for HOLD, Sheet

key lock, Change target for output, Changeover ‘+

display mode’ and ‘+/- display mode’, Changeover the

target for comparator, Light on/off the bar meter display,

Light on/off the comparator setting display

-10 ℃ ~ 50 ℃

85 %RH or less (Non condensing)

AC100 V (AC85 V ~ AC132 V) 50/60 Hz

Approx. 22 VA (without any options, at AC100 V)

Approx. 1.9 kg (without options)

< Accessories >

192 15 160 (20.3)

187 +1

0

Cutting size for panel mount

92

96

+1

0 Unit : mm

34

http://www.minebea-mcd.com http://www.minebea-mcd.com

35

Specifications

Features

Bridge Power supply :

Applicable transducer :

Input range :

Output range :

Output rate :

Zero adjustment range :

Non-linearity :

Temperature coefficient :

Input filter :

A/D sampling rate :

Display range :

Display unit :

Over display :

Status display :

Judgement display :

Display rate :

Decimal display :

External control function :

Display range :

Display unit :

No. of display :

No. of set points :

S1, S2, S3, S4 :

S0 :

Operating Temp. range :

Humidity :

Power supply :

Power consumption :

Weight :

Protection grade :

Outlines

< Accessories >

Digital Peak Holder CSD-819C

< Options >

Current output

CSD-819C-07 (DC4 mA ~ 20 mA)

BCD output

CSD-819C-15

RS-232C interface

CSD-819C-74

RS-422 / RS-485 interface

CSD-819C-76

Voltage input

CSD-819C-31

□96 10 119.5 (20)

92 +1

0

Cutting size for panel mount

92 +1 0

106

● High speed sampling at 2 000 times/s with the small unit.

● Various peak mode setting.

● Equipped with 4 points calibration dataes and the changeover function of comparative brand.

● CE mark applicable.

● Suitable for the press fit measuring.

Instruction manual

Time lag fuse

Unit seal

Panel fittings

Panel mount gascket

BCD output connector

(When BCD output is equipped.)

Instruction manual for voltage input

(When the voltage input is equipped.)

・

・

・

・

・

・

・

1 pad

1 piece

1 sheet

2 pieces

1 piece

1 piece

1 pad

160

● IP65 as a protection rating.

Unit : mm

DC10 V±0.5 V within 60 mA

(Changeable to DC5 V or DC2.5 V)

Bridge power supply D

strain gage applied transducers (350 Ω).

F.S. setting is available at the input range from ±0.4 mV/V

~ ±3.1 mV/V

(When bridge power supply is DC10 V or DC5 V)

F.S. setting is available at the input range from ±0.8 mV/V

~ ±3.1 mV/V (When bridge power supply is DC2.5 V)

DC±10 V Load resistance 5 kΩ or more

(F.S. setting is available in the function.)

100 times/s, 500 times/s, 1 000 times/s, 2 000 times/s

(Synchronous with A/D sampling rate.)

±2.0 mV/V

Display 0.025 %F.S., Output 0.025 %F.S.

Zero ±0.5 μV/℃, Sensitivity ±0.01 %F.S./℃

(Input conversion, in F.S. setting at the input of ±0.5 mV/V

~ 3.1 mV/V)

10 Hz, 100 Hz, 1 kHz

2 000 times/s (Changeable to 100 times/s, 500 times/s

or 1 000 times/s.)

- 11 000 ~ 11 000 (Changeable to x 2, x 5 or x 10)

7 segment red LED with 17 mm character height

‘-OL’ at minus over, ‘OL’ at plus over

SEL.1, SEL.2, CHECK, HOLD, PEAK, MEAS., END

S0, S1, S2, S3, S4

20 times/s

(Changeable to 4 times/s, 50 times/s or 100 times/s.)

Changeable to No display, 101

, 102

, 103

or 104

.

ZERO, PEAK/TRACK, HOLD, RESET, SEL.1, SEL.2

-99 999 ~ 99 999

7 segment green LED with 8 mm character height

1 point (Selectable from S0, S1, S2, S3 or S4)

5 points of S0, S1, S2, S3 and S4

Open collector is ON when it reaches under/over the

comparator set value.

Open collector is ON with the condition set by function.

-10 ℃ ~ 50 ℃

85 %RH or less (Non condensing)

AC100 V ~ AC240 V (AC85 V ~ AC264 V) 50/60 Hz

Approx. 8 VA (without any options, at AC100 V)

Approx. 550 g (without options)

IP65 (only for the front panel when the attached panel

mount gasket is installed.)

DC10 V

DC5 V

DC2.5 V

: Up to 2 units

: Up to 4 units

: Up to 8 units

34

Specifications for Analog

Specifications for Digital

Comparator function

Open collector output signal

General specifications

Specifications

Features

Bridge Power supply :

Applicable transducer :

Input range :

Output range :

Output rate :

Zero adjustment range :

Non-linearity :

Temperature coefficient :

Input noise :

Input filter :

A/D sampling rate :

CHECK :

Display range :

Display unit :

Over display :

Status display :

Judgement display :

Display rate :

Set value :

No.of set points :

Conversion rate :

S1, S2 :

S0 :

Contact specifications :

Operating temp. range :

Humidity :

Power supply :

Power consumption :

Weight :

Protection grade :

Outlines

< Accessories >

Digital Indicator CSD-815B

< Options >

Current output

CSD-815B-07 (DC4 mA ~ 20 mA)

BCD output

CSD-815B-15

RS-232C interface

CSD-815B-74

RS-422 / RS-485 interface

CSD-815B-76

CC-Link interface

CSD-815B-73

□96 10 119.5 (20)

92 +1

0

Cutting size for panel mount

92 +1 0

106

● Compact size 96 mm x 96 mm.

● Equipped with peak hold function.

● CE mark applicable.

● Equipped with CC-Link interface.

Instruction manual

Time lag fuse

Unit seal

Panel fittings

Panel mount gascket

BCD output connector

(When BCD output is equipped.)

Connector for CC-Link interface

(When CC-link interface is equipped.)

Instruction manual for CC-link interface

(When CC-link interface is equipped.)

・

・

・

・

・

・

・

・

1 pad

1 piece

1 sheet

2 pieces

1 piece

1 piece

1 piece

1 pad

160

Specifications for Analog

Specifications for Digital

External control function

Comparator function

Contact output signal

General specifications

● Equipped with 4 points calibration dataes and the changeover function of comparative brand.

● IP65 as a protection rating.

Unit : mm

DC5 V±0.25 V within 60 mA (Changeable to DC2.5 V)

Up to 4 units of strain gage applied transducers (350 Ω)

F.S. setting is available at the input range from ±0.4 mV/V

~ ±3.1 mV/V （When bridge power supply is DC5 V）

DC±10 V Load resistance 5 kΩ or more

(F.S. is set by the function.)

Changeable to 4 times/s, 20 times/s, 50 times/s or

100 times/s (Synchronous with display rate.)

±2.4 mV/V

Display 0.01 %F.S., Output 0.05 %F.S.

Zero ±0.5 μV/℃, Sensitivity ±0.01 %F.S./℃

(Input conversion, in F.S. setting at the input of ±0.5 mV/V

~ 3.1 mV/V)

±0.6 μVp-p or less

2 Hz, 10 Hz, 100 Hz, 2 kHz

100 times/s

Approx.0.3 mV/V

(Setting with the interval of about 0.1 mV/V is available

in the range from approx.0.1 mV/V to 1.5 mV/V)

- 99 999 ~ 99 999

7 segment red LED with 17 mm character height

‘-OL’ at minus over, ‘OL’ at plus over

SEL.1, SEL.2, ◎, HOLD, A/Z, CHECK, PEAK, BOTTOM

S0, S1, S2

4 times/s

(Changeable to 20 times/s, 50 times/s or 100 times/s.)

SEL.1, SEL.2, ZERO, PEAK/TRACK/A/Z, HOLD,

RESET/A/Z OFF

-99 999 ~ 99 999

3 points of S0, S1 and S2 (S0 is set by the function)

Changeable to 4 times/s, 20 times/s, 50 times/s or

100 times/s.(Synchronous with display rate.)

* The measurement processing and the comparision

precessing interrupts while displaying the set value.

The contact operates when reached under/over the

comparator set value.

The contact operates with the condition set by function.

1a contact AC125 V 0.1 A（Resistance load）

DC30 V 0.5 A（Resistance load）

-10 ℃ ~ 50 ℃

85 %RH or less (Non condensing)

AC100 V ~ AC240 V (AC85 V ~ AC264 V) 50/60 Hz

Approx. 12 VA (without any options, at AC100 V)

Approx. 16 VA at maximum (with options, at AC100 V ~ AC240 V)

Approx. 500 g (without options)

IP65 (only for the front panel when the attached panel

mount gasket is installed.)

36

http://www.minebea-mcd.com http://www.minebea-mcd.com

37

Specifications

Features

Bridge Power supply :

Applicable transducer :

Input interface :

Baud rate :

Termination :

Display range :

Display unit :

Over display :

A/D value over display :

Status display :

Judgement display :

Display rate :

Decimal display :

Display range :

No. of set points :

Set value of hysteresis

data width :

Hysteresis direction :

Conversion rate :

Baud rate :

Data bit length :

Parity bit :

Stop bit :

Terminator :

Communication method :

Synchronous method :

Transmission data :

Cable length :

Signal name :

:

Operating temp. range :

Humidity :

Power supply :

Power consumption :

Weight :

Protection grade :

Outlines

< Accessories >

Digital Indicator for Digital Load Cell CSD-401

< Options >

Current output

CSD-401-07 (DC4 mA ~ 20 mA)

BCD output

CSD-401-15

RS-422 / RS-485 interface

CSD-401-76

Serial interface

CSD-401-77

96 10 110 (20)

92+0.8

0

Cutting size for panel mount

45.5+0.8 0

48

● Up to 8 units of digital load cell are connectable.

● Compact size 96 mm x 48 mm.

● Equipped the RS-232C as a standard.

● IP65 as a protection rating.

Instruction manual

Midget fuse

Unit seal

Panel fittings

Panel mount gascket

BCD output connector

(When BCD output is equipped.)

・

・

・

・

・

・

1 pad

1 piece

1 sheet

2 pieces

1 piece

1 piece

160

Voltage output

CSD-401-25 (DC0 V ~ 10 V)

(7.25)

53

(7.25)

* Please use a junction box model DB-307 for connecting with

several digital load cells.

Unit : mm

DC12 V±0.3 V within 280 mA

Up to 8 units of Minebea’s digital load cells.

RS-485 (2-wires method)

56 700 bps

Apply a resistance (120 Ω) between the terminals in

rear panel.

- 99 999 ~ 99 999

(Changeable to x 2, x 5, x 10, x 20 or x 50)

7 segment red LED with 14.2 mm character height

‘-OL’ at minus over, ‘OL’ at plus over

‘-OVF’ at minus over, ‘OVF’ at plus over

STAB, TARE, GROSS, NET, ZERO, HOLD

SET1, SET2, SET3, SET4, SET5

15 times/s (Changeable to 5 times/s.)

Changeable to No display, 101

, 102

, 103

or 104

.

ON/OFF, SET, TARE, NET/GROSS, ZERO, PRINT,

NET display, Display HOLD

-99 999 ~ 99 999

(0 ~ 99 999 for flow mode and discharge mode.)

5 points of SET1, SET2, SET3, SET4 and SET5

0 ~ 99 digit

Changeable to either ‘On-delay’ or ‘Off-delay’.

Changealbe to 5 times/s or 15 times/s.

Selectable from 1 200 bps, 2 400 bps, 4 800 bps or

9 600 bps.

Selectable from 7 bit or 8 bit

Selectable from none, even or odd.

Selectable from 1 bit or 2 bit.

Selectable from CR+LF or CR.

Half duplex

Start−stop synchronous method

ASCII code

15 m at maximum

TXD, RXD, COM.1

Zero tracking, Digital filter, Stabilizing filter,

Digital linearization

-10 ℃ ~ 50 ℃,

85 %RH or less (Non condensing)

AC100 V ~ AC240 V (AC85 V ~ AC264 V) 50/60 Hz

Approx. 13 VA (without any options, at AC100 V)

Approx. 300 g (without options)

IP65 (only for the front panel when the attached panel

mount gasket is installed.)

Specifications for Applied Sensor

Specifications for Digital

External control function

Comparator function

RS-232C interface

Various functions

General specifications

Bridge power supply

Input range

Output range

Output rate

Output resolution

Zero adjustment range

Non-linearity

A/D Sampling rate

Display range

Display rate

Power supply voltage

Power consumption

W×H×D

Weight

Input / Output

(VDC)

(mV/V)

(V)

(times/s)

(mV/V)

(%F.S.)

(times/s)

(times/s)

(VAC)

(VA)

(mm)

(Approx. kg)

(Standard)

(Option)

Bridge power supply

Input range

Output range

Output rate

Output resolution

Zero adjustment range

Non-linearity

A/D Sampling rate

Display range

Display rate

Power supply voltage

Power consumption

W×H×D

Weight

Input / Output

(VDC)

(mV/V)

(V)

(times/s)

(mV/V)

(%F.S.)

(times/s)

(times/s)

(VAC)

(VA)

(mm)

(Approx. kg)

(Standard)

(Option)

(CSD-581-15)

Digital indicators

Suitable for the application of tension meter

system. Equipped with 2 channels input for

load cell signals and displays ADD/SUB

result digitally. Also equipped with analog

output propotional to ADD/SUB result.

2.5, 10

0.2 ~ 3.1

DC0 ~ 10, DC0 ~ 5, DC0 ~ 1,

DC±10, DC±5, DC±1, DC4 mA ~ 20 mA

100, 20, 4

Approx.1/24 000

- 1.9 ~ 1.9

0.01

100, 20, 4

- 19 999 ~ 99 999

4, 20

100 ~ 240

25

200 × 150 × 201.6

4.4

Digital indicator TMD-100

for Tension meter system

Best for high accuracy (6 000 div.) scale applications (at the input of 0.5 μV/d or more).

Measurement value display with large scale,

fluorescent display 22 mm character height.

Full 6 digit (999 999) can be displayed.

Built-in linearizer (up to 3 points).

5

- 3.1 ~ 3.1

－

－

－

- 2.5 ~ 2.5

0.01

15

- 999 999 ~ 999 999

5, 15

100

4

192 × 96 × 161.2

1.6

] (Install more as an option)

Small size with built-in control panel.

Variety of interfaces with the computer,

sequencer, etc.

2.5, 5, 10

0.2 ~ 3.1

－

－

－

- 2.5 ~ 2.5

0.01

200

- 9 999 ~ 99 999

4, 20, 50, 100

100 ~ 240

16

67 × 208 × 140.7

1.2

CSD-891B

Built-in control panel type

DC24 V of power supply voltage.

Plenty of calibrating function.

High accuracy and high resolution.

BCD digital output (CSD-581-15)

RS-232C interface (CSD-581-74)

2.5, 10

0.2 ~ 3.1

－

－

－

- 0.1 ~ 2.4

0.01

100

- 1 000 ~ 11 000

4, 20, 50

DC24 V

9 (at DC24 V)

220 × 130 × 35.6

0.25

CSD-581-15/74

PC Board type

or

－

Compact size (48 mm x 96 mm) with peak

hold function. Up to 4 strain gage based

transducers can be connected. Available

DC power supply as an option. IP65 for

protection grade.

5

0.4 ~ 3.1

DC2

4, 20

Approx.1/10 000

- 0.3 ~ 2.4

Display 0.05, Output 0.1

20

- 9 999 to 99 999

4, 20

100

2.2

96 × 48 × 120

0.3

CSD-702 CSD-904

Compact size(48 mm×96 mm) with peak

hold function. Up to 4 strain gage based

transducers are connectable. Available

BCD output and DC power supply as an

option. IP65 for protection grade.

2.5, 5

0.4 ~ 3.1

DC5

4, 20

Approx.1/10 000

- 0.3 ~ 2.4

Display 0.05, Output 0.05

20

- 9 999 ~ 99 999

4, 20

100 ~ 240

11

96 × 48 × 120

0.3

CSD-701B

Current output Voltage output BCD output CONTROL I/O Comparison output RS-232C I/F RS-422 I/F RS-485 I/F Serial I/F CC-LINK DC Power Supply

http://www.minebea-mcd.com

Instrumentations

[

38

http://www.minebea-mcd.com http://www.minebea-mcd.com

39

http://www.minebea-mcd.com

Instrumentations

CSA-562B

For optical transmission method

Torque transducer

4 1/2 digit digital monitor.

Exclusive use for optical transmission

method non-contact flange type torque

transducer.

－

CSA-522B

High response type

Printed circuit board type

1 CH (CSA-504S-1B),

4 CH (CSA-504SB)

CSA-504S

P.C. board type

Compact size and light weight.

Simple design, Lower price

AC20 Vrms Square wave

(Rotor service voltage)

5 kHz ~ 15 kHz

DC±10

2 kΩ or more

±15 %R.O.

(Rated output of torque transducer)

0.01

1, 10, 30, 50, 100, 300, 500, 1k

100

100

66 × 160 × 280

2.5

2.5, 5, 10

0.35 ~ 3.5

DC±10, DC±20 mA

500 Ω or more

- 0.6 ~ 0.6

0.005

1, 30, 25 k

100

15

49.5 × 138 × 173.6

1.2

10

1

DC±10

2 kΩ or more

- 0.1 ~ 0.1

CSA-504S-1B : 0.05

CSA-504SB : 0.1

10

±DC15

CSA-504S-1B : 150 mA

CSA-504SB : 550 mA

CSA-504S-1B : 70 × 70 × 21.6

CSA-504SB : 42 × 176 × 95

CSA-504S-1B : 0.2

CSA-504SB : 0.3

10

0.5 ~ 1.5

DC±10

2 kΩ or more

- 0.25 ~ 0.25

0.02

1 k

DC24

100 mA

80 × 70 × 21.6

0.05

－

CSA-521

P.C. board type

Most suitable direct-current amplifier for

measurements of the load, pressure, the

torque, and displacement, etc. Equipped with

auto zero function as an option.

Auto zero

CSA-504S-1B

CSA-504SB

(VDC)

(mV/V)

(V)

(mV/V)

(%F.S.)

(Hz)

(VAC)

(VA)

(mm)

(Approx.kg)

(Standard)

(Option)

Transmitters

Transmitters

Bridge power supply

Input range

Output

Output load resistance

Zero adjustment range

Non-linearity

Frequency response range

Power supply voltage

Power consumption

W x H x D

Weight

Input / Output

(VDC)

(mV/V)

(V)

(mV/V)

(%F.S.)

(Hz)

(VAC)

(VA)

(mm)

(Approx.kg)

(Standard)

(Option)

38

Compact size and light weight.

Simple design, Lower price.

2.5, 5, 10

0.5 ~ 3

DC±10

2 kΩ or more

- 0.25 ~ 0.25

0.02

1, 10, 100, 1k

AC100

5

44 × 90 × 110

0.65

CSA-503C CSA-507C

2.5, 5, 10

0.3 ~ 3

DC±10

2 kΩ or more

- 2.4 ~ 2.4

0.01

1, 10, 100

AC100

10

42 × 176 × 164.4

1.5

Internal remote sensing circuit,

Automatic zero function (Option),

Equipped with CALIB function (0.3 mV/V)

and CHECK function.

, Auto zero － , Auto zero

Bridge power supply

Input range

Output

Output load resistance

Zero adjustment range

Non-linearity

Frequency response range

Power supply voltage

Power consumption

W x H x D

Weight

Input / Output

Current output Voltage output BCD output CONTROL I/O Comparison output RS-232C I/F RS-422 I/F RS-485 I/F Serial I/F CC-LINK PROFIBUS I/F

39

(%F.S.)

(VAC)

(VA)

(mm)

(Approx.kg)

Easily check output of strain gage based transducers in

mV/V. Also measure I/O resistance of strain gage based

transducers. Insulation resistance between main body

and each cable wire is also available.

350 Ω precision calibrator

The output can be calibrated by connecting this unit to a

digital indicator, a transmitter, or dynamic strain

instrumentation, etc., for strain gage based transducers.

DC2 V±0.02 V within 35 mA

Measurement of strain, resistant

value, output of strain gage

applied transducer

Deflection method

Zero point : ±0.2×10-6 strain/℃

Sensitivity : ±0.01 %F.S./℃

(after 15 min of warming up.)

Zero point ±0.2×10-6 strain/8 h

Sensitivity ±0.01 %F.S./8 h

(Within ±2 ℃ with the range of ×1)

4 times/s

Dot matrix type liquid crystal display

with LED back light.

AC100 V or battery drive through

Ni-Cd battery

Approx.0.8 VA

210 × 148.5 × 40

Approx. 1.7 kg

0.5 mV/V range 10 steps

2 mV/V range 10 steps

5 mV/V range 10 steps

10 mV/V range 10 steps

0.02 %F.S.

(Temp. range from 15 ℃ to 25 ℃)

DC12 V

±0.001 mV/V

350 Ω±7 Ω

350 Ω±7 Ω

0.03 %F.S./10 ℃

0.03 %F.S./10 ℃

185 × 47 × 125

Approx. 1.3 kg

PSD-704

Static strain digital indicator

Bridge power supply

Target for

measurement

Measuring method

Effect due to temp.

variation

Effect due to temp.

variation

A/D sampling

Display section

Power supply

voltage

Power consumption

W×H×D (mm)

Weight

PSC-350

Precision calibrator

Rated output

Error

Max. excitation voltage

Zero balance

Input resistance

Output resistance

Temp. effect on zero

Temp. effect on output

W×H×D(mm)

Weight

The hanging load is detected with load cell, and the

angle of jib (operating radius) is detected with a

capacitance sensor. These signals are processed by

microcomputer. These processed data is displayed and

warning signals are available.

3 points (Load 1 ~ 3) of strain gage

applied transducer(350Ω),

1 point of capacitive type angle detector

Display of moment ratio, Present

load, Present operating radius,

Status and monitor

Select one from Limit load, Angle

of jib, Moment No., Jib No. or

Range No.

0.5, 1, 2

DC24 V

100 × 210 × 162.9

Approx. 2.5 kg

Angle detector : SCL-90A1MB

Buzzer for warning

DML-802B

Digital moment limitter

Applicable transducer

Display

Monitoring display

Display rate (times/s)

Power supply voltage

W×H×D (mm)

Weight

Accessories

I/O

Dynamic

Strain Amplifiers

Frequency characteristic : DC～200 kHz,

Optional standard equivalent strain setting

using 4 digit switch and 3 digit and 1/2

digital display.

Single channel

60 Ω ~ 1kΩ

Auto balance

0.5 V output at the input of 100×10- 6 strain

(When bridge power supply is DC2 V)

MONITOR ±10 V, ±5 mA

OUTPUT ±10 V, ±30 mA

0.01

±1 ~ ±9 999×10- 6 strain

Accuracy ±0.2 %F.S. for each point

DC ~ 200 kHz +1 dB, -3 dB

10 Hz, 100 Hz, 1 kHz, 10 kHz, W/B

100

10

42 × 176 × 284.4

1.5

DAS-406B

Direct current amplifier system

－

Equipped with wire length correcting function

and open circuit check function. High gain

and high sensitivity. Excellent visibility and

operativeness.

DSA-631

Carrier amplifier system

Single channel

60 Ω ~ 1kΩ

Auto balance

±10 V output at the input of 200×10- 6 strain

(When bridge power supply is AC2 Vrms)

OUT-1 ±10 V ±5 mA

OUT-2 ±10 V ±10 mA

0.１

±1 ~ ±9 999×10- 6strain

DC ~ 2 kHz±10 %

10 Hz, 30 Hz, 100 Hz, 300 Hz, 500 Hz, W/B(2 kHz)

85 ~ 132/180 ~ 264, 10 ~ 30 VDC

9 (at AC100 V)

49.5 × 143 × 253

1.4

Measuring point

Applicable gage resistance

Balancing adjustment method

Sensitivity

Output

Non-linearity

CALIB

Frequency response range

Low-pass filter

Power supply voltage

Power consumption

W × H × D

Weight

Single channel

60 Ω ~ 1kΩ

Auto balance

1 V output at the input of 100×10- 6 strain

(When bridge power supply is AC2 Vrms)

±10 V,

Load resistance 2 kΩ or more

0.05

±1 ~ ±9 999×10- 6 strain

Accuracy ±0.5 %F.S.

DC ~ 2 kHz (at W/B filter)

1 Hz, 10 Hz, 100 Hz, 300 Hz, 1 kHz, W/B

100

10

42 × 176 × 284.4

1.5

Isolated input and output. Digital switch for

strain setting and 4 and 1/2 digital display.

CSA-561

Carrier amplifier system

(Standard)

(Options)

Current output Voltage output BCD output CONTROL I/O Comparison output RS-232C I/F RS-422 I/F RS-485 I/F Serial I/F CC-LINK PROFIBUS I/F

Strain Meter

40

http://www.minebea-mcd.com http://www.minebea-mcd.com

41

Techno Graph Techno Graph

* Desk shown for illustration only. *Test Fixture, PC and software are optional.

Universal testing machine providing high accuracy with simple operation TGE series ● High accuracy

● High performance and simple operation

● Light weight and compact

Accuracy is ±1 % (JIS 1 class) of the indicated value from 1/1 ~ 1/500 of load cell capacity.

±0.5 % (JIS 0.5 class) is available as an option

Automatic load cell span adjustment, One-touch auto-zero, Auto-return to test start (No overshoots),

Test condition registration, Manual 3 level speed setting, Analog output of test force and position.

Corresponds to the tension/compression continuous repeat test.

Improved model, weight reduced by 50 kg and width reduced by 100 mm from earlier model.

*1) The measuring range changes depending on the capacity of the installed load cell. *2) The stroke extension type and the effective width expansion type are produced.

JCSS：MINEBEA is a recognition trader of JCSS of one shaft tester (Metric Method Traceability System).

P/No.

Measuring range *1)

Measuring accuracy

Applicable standard

Effective testing width *2)

Cross head stroke

Tension stroke

Cross head speed

Setting method of speed

Manual speed

Testing mode

Display

Standard installed function

Outline dimensions

Weight

Power supply / Power consumption

Operating temp./Humidity range

(mm)

(mm)

(mm)

(mm/min)

(mm)

(Approx. kg)

Techno Graph Techno Graph

* Desk shown for illustration only.

*Test Fixture, PC and software are optional.

Universal testing machine providing high accuracy with simple operation TGI series ● High accuracy

● High performance and simple operation

● Four highly accurate times in resolution from past servo motor

Accuracy is ±1 % (JIS 1 class) of the indicated value from 1/1 ~ 1/1 000 of load cell capacity.

±0.5 % (JIS 0.5 class) is available as an option.

Automatic load cell span adjustment, One-touch auto-zero, Auto-return to test start position (No

overshoots), Test condition registration, 3 level of manual speed setting, Analog output of test force

and position. Corresponds to the tension / compression continuous repeat test.

The accuracy of the position control has been greatly improved, and the stable driving in a low speed

region becomes possible.

*1) The measuring range changes depending on the capacity of the installed load cell. *2) The stroke extension type and the effective width expansion type are produced.

*3) The length of tension stroke is the condition in mounting the load cell and chuck for maximum testing capacity. JCSS：MINEBEA is a recognition trader of JCSS of one shaft tester (Metric Method Traceability System).

P/No.

Measuring range *1)

Measuring accuracy

Applicable standard

Effective testing width *2)

Cross head stroke *2)

Tension stroke *3)

Cross head speed

Return speed

Display

Standard function

Outline dimensions

Weight

Power supply / Power consumption

Operating temp./Humidity range

(mm)

(mm)

(mm)

(mm/min)

(mm)

(Approx. kg)

The return speed can be arbitrarily set in the range from 0.1 ~ 1 500 mm/min (10kN

or less) or from 0.1 ~ 750 mm/min (50kN or more).

●

0.000 5 ~ 500 mm/min

(Setting between 0.1 ~ 500 mm/min can be made by 0.1 mm/min

pitch. Setting under 0.05 mm/min can be made by 9 steps of

0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001 or 0.000 5.)

TGI-10kN

0.05 N ~ 10 kN

715

(with CH/CHT-10kN)

TGI-5kN

0.05 N ~ 5 kN

825

(with CH-5kN)

TGI-1kN

0.05 N ~ 1 kN

870

(with CH-1kN)

TGI-500N

0.05 N ~ 500 N

900

(with CH-1kN)

TGI-200N

0.05 N ~ 200 N

920

(with CH-200N)

within ±1 % of indicated value from 1/1 to 1/1 000 of load cell capacity for tension and compression (±0.5 % of indicated value is available as an option)

1 or 0.5 class of JIS B 7721, class 1 or 0.5 of ISO7500-1, Class 1 of ASTM E4

Test force: 5 digits display ±99 999, Peak and Rupture testing power can be displayed. Position: 6 and 1/2 digits ±1 999.999,

Accuracy: within 0.1 % of indicated value.

Temperature 5 ℃ ~ 40 ℃, Humidity : 20 % ~ 80 %RH (No condensing)

TGI-250kN

0.05 N ~ 250 kN

600

1 550

630

(with CH/CHT-250kN)

1 400 x 2 450 x 894

1 200

TGI-100kN

0.05 N ~ 100 kN

600

1 350

860

(with CH/CHT-100kN)

1 221 x 2 192 x 720

900

TGI-50kN

0.05 N ~ 50 kN

420

1 015

480

(with CH/CHT-50kN)

900 x 1 507 x 490

310

420 (with protect cover for lead screw)

1 090

700 x 1 583 x 513

100

Three phase AC200 V~230 V,

5 kW at maximum

Three phase AC200 V~230 V,

7.0 kW at maximum

It can be set arbitrarily in the range from 0.1 ~ 750 mm/min

Load cell capacity : Auto adjust, Load cell span : Auto set for tension / compression, Zero point : One push, Position reset : One push, Operation

detected sample rupture : Selectable from either stop, reverse or ignore, Rupture detectivity : arbitrary set with 0.04 % to 99.00 % of the test force,

Test condition registration : 10 conditions, Analog output of test force and position : DC0 V to ±DC5 V (with scaling function), Communication

function : Conforming to USB interface 2.0/1.1 standard.

Single phase AC100 V ~ 115 V,

400 W at maximum. Three phase AC200 V~230 V, 750 W at maximum

0.000 5 ~ 1 000 mm/min

(Setting between 0.1 ~ 1 000 mm/min can be made by 0.1 mm/min pitch. Setting under 0.05 mm/min

can be made by 9 steps of 0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001 or 0.000 5.)

It can be set arbitrarily in the range from 0.1 ~ 1 500 mm/min

Three phase AC200 V~230 V,

2 kW at maximum

TGE-10kN

0.1 N ~ 10 kN

715

(with CH/CHT-10kN)

TGE-5kN

0.1 N ~ 5 kN

825

(with CH-5kN)

TGE-1kN

0.1 N ~ 1 kN

870

(with CH-1kN)

TGE-500N

0.1 N ~ 500 N

900

(with CH-1kN)

TGE-200N

0.1 N ~ 200 N

920

(with CH-200N)

TGE-250kN

0.1 N ~ 250 kN

600

1 550

630

(with CH/CHT-250kN)

1 400 x 2 450 x 894

1 200

TGE-100kN

0.1 N ~ 100 kN

600

1 350

860

(with CH/CHT-100kN)

1 221 x 2 192 x 720

900

TGE-50kN

0.1 N ~ 50 kN

420

1 015

480

(with CH/CHT-50kN)

900 x 1 522 x 490

200

±1 % of indicated value from 1/1 ~ 1/500 of load cell capacity = JIS 1 class (±0.5 % of indicated value = JIS 0.5 class is an option)

1 or 0.5 class of JIS B 7721, class 1 or 0.5 of ISO7500-1, Class 1 of ASTM E4

0.1, 0.5 and 1 ~ 500 (Possible to set by 1 mm/min pitch between this range)

High value either of ±0.5 % of the setting speed, or ±0.002 5 mm/min

Manual : Numeric input from control panel 0.1, 0.5, 1 ~ 500 mm/min (set by 1 mm/min pitch), PC : Automatically set by testing condition.

3 level speed (H/M/L), Each speed can be arbitrarily set. Single or cycle mode (Combination of testing power and position) Option : Creep, Automatic load.

5 ℃ ~ 40 ℃ / 20 % ~ 80 %RH (No condensing)

420 (with protect cover for lead screw)

1 100 (The maximum installation interval is 1 180)

660 x 1 619 x 503

80

Single phase AC100 V ~ 115 V, 50/60 Hz / 200 W Three phase AC200 V±20 V,

1.8 kW at maximum

Three phase AC200 V±20 V,

7.5 kW at maximum

Three phase AC200 V±20 V,

10 kW at maximum

Load cell capacity : Auto adjust, Load cell span : Auto set for tension / compression, Zero point : One push, Position reset : One push,

Operation detected sample rupture : Selectable from either stop, reverse or ignore, Rupture detectivity : arbitrary set with 0.1 % to 9.9 % of the

test force, Test condition registration : 10 condition, Analog output of test force and position : DC0 V to ±DC5 V (with scaling function),

Communication function : Conforming to USB interface 2.0/1.1 standard.

Test force: 5 digit display ±99 999, The peak and the rupture testing power can be displayed. Position: 5 digit and 1/2 ±1 999.99,

Accuracy: within 0.1 % of indicated value.

Tensile and Compression Testing Machine Tensile and Compression Testing Machine

・ Applied OS：Windows XP , Windows Vista , Windows 7 (32 bit only)

・ Memory：512 MB or more

・ Communication function

1. Operating condition

2. Software

● Software for Standard testing

TgAnest (for TGI), SR-01-001 (for TG), SR-06-001(for TGE), SR-07-001(for LTS)

Corresponds to the test for tension, compression and bend (3 or 4 points)

An arbitrary formula and item name can be changed.

◆ Analytical item

Sectional area of specimen, Elastic modulus, Elasticity inclination (Spring constant)

Upper yield point, Lower yield point

Yield strength point,

The middle test force (6 points at max.)

The middle displacement point (6 points at max.)

The maximum test emphasis, Rupture point

An initial tensile resistance degree, the fineness, and the specific gravity can be

analyzed for the string examination.

Statistical work (50 or less in lot)

Ｒ

* Windows is the registered trade mark in the United States and other nations of Microsoft Corporation. Ｒ

● Analysis display

● Characteristics

◆

◆

◆

◆

Analyze the strength characteristics of various material and products

Supports report creation of ‘.txt’ and ‘.wmf’ files and graphs which can be inserted

into other applications.

Double graph screen supports a single graph and overlapping graphs while testing.

After the lot ends, the incremental test is possible.

The test force, the stress,

displacement, and the

strain have been calculated.

● Software for Adhesion test, Tear test and Friction test

TgAnest (for TGI), SR-01-002 (for TG), SR-06-002(for TGE), SR-07-002(for LTS)

Corresponds to the adhesion test for 90°, 135° and 180°, tear test and friction test

◆ Analytical item

Maximum local maximum point,

Minimum local minimum point,

The first maximum point,

The first local minimum point,

The middle displacement point

(six points or less), Rupture point,

Starting point of expansion,

Integration average,

Simple arithmetic average

Average of the maximum point,

Local minimum point average,

The maximum local minimum point average,

Tear test power,

Big and small, maximum point six point average

The middle displacement for 2, 3, 4, 5, and 6 points average

Average of collection

Internal tearing strength

Coefficient of dynamic friction, Coefficient of static friction

Energy, No. of the maximum points and the minimum points

Statistical work ((50 or less in lot)

● Software for other examinations

For rubber compression test (both appearance is possible)

For wood examination

For automatic load control examination

For spring examination

● Setting display of print format

Test force, conversion test force,

unit test force displacement,

and peel distance

Test force,

conversion test

force, and unit

test force

Data processing system

TG series D-sub 9 pin (Prepare the conversion connector for USB.)

TGI series / TGE series / LTS series USB 2.0/1.1 conforming.

● Pre-view of print format

● Display in the test process.

(Tension and compression test)

Mean value, Standard deviation, Standard deviation ×3, Minimum value of the maximum

value, Median, Maximum value - minimum value, Coefficient of variation, Mean value of

JIS K 6301, Sum total, Square of sum total, Number of N

Mean value, Standard deviation, Standard deviation ×3, Minimum value of the maximum

value, Median, Maximum value - minimum value, Coefficient of variation, Mean value of

JIS K 6301, Sum total, Square of sum total, Number of N

Ｒ Ｒ

42

http://www.minebea-mcd.com http://www.minebea-mcd.com

43

Strength test by simple operation

Optional Testing Jig for LTS series

Load tester LTS-50N/LTS-200N/LTS-500N

Data processing software

The collection of data and the print

out of the graph and the result is

possible by PC installed with

standard software.