The TK1oSA active subwoofer adopts bass reflex design;Composed of one \varphi 6 5 core 1 0 " LF unit and one Class D power amplifier, it adopts phase plug compression technology to greatly improve the compliance of the unit. The S-shaped noise reducing porting tube design perfectly solves the problem of high wind noise of the conventional ULF bass reflex enclosure. It has advantages such as strong force,deep bass,and pure sound quality;
The unit adopts an ultra long stroke linear displacement design,and the diaphragm is made of a mixture of pulp and Kevlar. It has extremely high hardness and can withstand the pressure generated by the diaphragm inside and outside the cabinet under large dynamic operation. Combined with the foam rubber folding edge ring,it can compress a large amount of air more freely. The centering disk design with high compliance has excellent damping characteristics and dynamic stability, making low-frequency rapid, powerful,and elastic;
Adopting the switch mode power supply+Class Damplifier design,it has the advantages of small size,low heat generation,and high efficiency; Built-in 4 frequency band options, 8 0 H z 100Hz,120Hz,and 150H. Users can adjust the low cut position of the bass according to their needs to achieve better bass effect; It has phase control function of O-180 degrees and can adjust the appropriate phase according to on-site usage needs.
Features:
1.The cabinet is made of Russian birch plywood ^ + die-casting aluminum base,with piano baking finish sprayed on the surface fora stylish appearance.
2.The use of phase plug compression technology greatly improves the compliance of the unit design;
3.The amplifier adopts the switch mode power supply+Class D power amplifier design, with small size, low heat generation,and high efficiency;
4.The suction cup style foot pad design ensures that the speaker will not move under large dynamics;
5.The design of S-shaped noise reducing porting tube perfectly solves the problem of high wind noise of the conventional ULF bass reflex enclosure.
Application areas: multifunctional halls,cinemas,bar rooms,tea restaurants, home theaters,etc
| Model | TK10SA |
| Type | 10" active subwoofer |
| Frequency response( -10dB) | 40Hz~150Hz |
| Input sensitivity | OdBu |
| Max.SPL | 111dB (PeaK) |
| Power of the amplifier | 400W(4Ω) |
| Unit | Φ65 core voice coil 10" LF unit |
| Dimensions( WxHxD) | 353*379*353(mm) |
| Power supply | AC100V-240V |
| Weight | 16.3kg |
① (L) Signal input socket, Combo socket, compatible with XLR and 6 . 3 5 \mathsf {mm } JACK socket
② (L)XLR 3-core wiring signal output
③ (R) Signal input socket, Combo socket,compatible with XLR and 6.35mm JACK socket
④ (R) XLR 3-core wiring signal output
⑤ Phase switching button: Touch the button, the 180 degree indicator light will light up, indicating that the output signal is of the reversed phase,otherwise it is in phase.
⑥ Volume and frequency band control knob: Rotate the knob counterclockwise to decrease or turn of the volume; Rotate the knob clockwise to increase the volume; Short press the volume knob downwards and rotate it to select the 80Hz-100Hz-120Hz-150Hz frequency band,and the indicator light of the corresponding frequency band wil light up.
⑦ Power switch: Set to "1" to turn on the power of the machine; On the contrary, cut off the power supply of the machine.
SOUNDKINGAUDIO WWW.SOUNDKING.COM
All rights reserved to SOUNDKING. No part of this manual may be reproduced, translated or photocopied by any means for any purpose,without the written permission of SOUNDKING. The information involved in this manual is subject to change without notice.
产品介绍
TK10SA有源低音炮采用低音反射设计;它由一个Φ65芯10“低频单元单元和一个D类功率功放组成,采用相位塞压缩技术,大大提高了单元的顺应性。S形降噪端口管设计完美解决了传统ULF低音反射罩的高风噪问题。它具有力度大、低音低沉、音质纯正等优点;
该装置采用超长行程线性位移设计,隔膜由纸浆和凯夫拉纤维的混合物制成。硬度极高,能承受箱体内外隔膜在大动态运行时产生的压力。结合泡沫橡胶折叠边缘环,可以更自由地压缩大量空气。高柔量定心盘设计具有优异的阻尼特性和动态稳定性,使低频快速、有力、有弹性;
采用开关电源+D级功放设计,具有体积小、发热少、效率高的优点;内置4个频段可选,80Hz、100Hz、120Hz、150H。用户可以根据需要调整低音的低切位置,以获得更好的低音效果;它具有0-180度的相位控制功能,可以根据现场使用需要调整适当的相位。
特征:
1.箱体采用俄罗斯桦木胶合板+压铸铝底座,表面喷涂钢琴烘烤饰面,外观时尚。
2.采用相位塞压缩技术大大提高了单元设计的合规性;
3.功放采用开关电源+D类功率功放设计,体积小、发热少、效率高;
4.吸盘式脚垫设计确保音响不会在大的动态下移动;
5.S形降噪端口管的设计完美地解决了传统ULF低音反射罩的高风噪问题。
应用领域:多功能厅、电影院、酒吧间、茶室、家庭影院等
技术参数
| 型号 | TK10SA |
| 类型 | 10"有源低音箱 |
| 频率响应 (-10dB) | 40Hz~150Hz |
| 输入灵敏度 | 0dBu |
| 最大 | 111dB(峰值) |
| 功放功率 | 400W(4Ω) |
| 单元 | Φ65芯音圈10"低频单元单元 |
| 尺寸(宽x高x深) | 353*379*353(mm) |
| 电源 | AC100V-240V |
| 重量 | 16.3kg |
① (L)信号输入插座,组合插座,兼容XLR和6.35mm插孔
② (L)XLR3芯接线信号输出
③ (R)信号输入插座,组合插座,兼容XLR和6.35mm插孔
④ (R)XLR3芯接线信号输出
⑤ 相位切换按钮:点击该按钮,180度指示灯将亮起,表示输出信号为反相,否则为同相。⑥ 音量和频带控制旋钮:逆时针旋转旋钮可减小音量或关闭音量;顺时针旋转旋钮可增加音量;短按音量旋钮向下旋转可选择80Hz-100Hz120Hz-150Hz频段,相应频段的指示灯将亮起。
⑦ 电源开关:设置为“1”打开机器电源;反之,切断机器的电源。
音王电声股份有限公司WWW.SOUNDKING.COM该手册所包含的所有内容/图片,必须由音王公司授权方可拷贝或用于其它用途。所包含的内容如有更改,恕不另行通知。




