该页无缩略图
Ingenic IP Module
Z55D
Introduction:
Human detection IP module, support smart265 and HTML5 technology, max 5MP 2592\*1904 @20pfs,support Two-way Intercom and human alert voice broadcast, D-WDR, 3D DNR,support 4 kinds of lights mode: dual light, warm Light , Infrared CDS or Sensor Trigger,support Onvif, support to draw area to detect alarm,support to extend IO board:TF card(512G), wifi, reset,RS485,alarm
Features:
●Resolution5MP(2592\*1904@20fps),4MP(2560\*1920@25fps),3MP(2304\*1296@25fps),2MP (1920\*1080@25fps) is optional.
●Built-in humanoid detection algorithm;
●Detection frame 5fps, detect 5 people at the same time;
● Low consumption, low code stream, low delay;
● H.265 compression format, save bandwidth and storage space;
●Support Smart IR to avoid Infrared over-exposure at night;
●Support ICR auto switch, achieve best result for D&N video;
●Support PoE (option)
●Support 3D DNR and digital WDR;
●Support to extend IO board: TF card (512G) (option)
●Support to extend full function IO board: WIFI, RS485, Alarm,Reset (option)
●Support auto-electronic shuttle to suit different surveillance environment
●Support two-way audio intercom
●Support HTTPS encrypted transmission
●Support Onvif, email, NTP service
●Change the password during initial use to ensure the security of the password
Specification:
| Camera | |
| Model no | Z55D |
| Chipset | T31X |
| Sensor | 1/2.7", 5MP low illumination CMOS sensor |
| Lens | Support motorized lens |
| D&N | ICR switch, auto/color/B&W/CDS trigger/ customized time |
| D-WDR | D-WDR (Off/Low/Middle/High) |
| IR Led Control | IR/warm/dual light, auto/manual/off, support 0-100 brightness adjust |
| 3D DNR | Off/Low/Middle/High/Higher |
| Defog | Off/Low/Middle/High |
| Mirror | Off/horizontal mirror/vertical mirror/180° flip |
| Image Setting | Brightness,contrast,sharpness,saturation,chroma |
| Detection Quantity | ≤5 person |
| Humanoid Size | Humanoid pixel≥40X40 |
| Detection Ratio | ≥99% (meet above requirement) |
| Capture Correspondingspeed | ≤1s |
| Max Detection Frame | 5fps/s |
| Fault Detection Ratio | ≤2% |
| Detect Part | People with any posture including half body,head,hand shoulder |
| Track People | Support |
| Detection Mode | Support static and dynamic humanoid detection |
| Detection Method | Image detection during day or night time with lights or IR Leds |
| Detection Area | Appointed area, default full-screen |
| Upload Method | Upload it under private protocol |
| Trigger Method | Video trigger |
| Audio & Video Encoding | |
| Standard | Smart 265, H.265,H.264 |
| Encoding Feature | Main stream:5MP(2592*1904@20fps), 4MP (2560*1920@25fps),3MP(2304*1296@25fps), 2MP (1920*1080@25fps)Sub-stream:D1(720*576),VGA(640*480),Q720P(640*360),CIF(352*288),QVGA(320*240) |
| Max Resolution | 5MP 2592*1904 |
| Video Code Rate | Fixed code rate,variable code rate(main stream:160Kbps-4000kbps) |
| Video Type | Composited stream/video stream |
| Audio Standard | G.711u/ G.711A 64Kbps |
| Network Function | |
| Network protocol | TCP/IP.UDP,HTTP,HTTPS,DHCP,RTSP,DDNS,NTP,PPPOE,UPNP,SMTP |
| Connection Protocol | Slink, Onvif, GB28181 (option) |
| Security Mode | Authorized user name and password, HTTPS encryption, AES connectingencryption, RTSP verification |
| Motion Detection | Set detection area, can set multi-level sensitivity |
| Occlusion Alarm | Support 1 area |
| Privacy Mask | Support 4 areas |
| Schedule Linkage | Snapshot, email |
| Device AbnormalInspection | Support network broken alarm, IP conflict alarm, illegal visiting alarm |
| Character Overlay (OSD) | Title, time and date overlay, multi-line, and color of characters optional |
| Port | |
| Network Port | RJ45 10M/100M network self-adaptation |
| Audio | MIC Input/ Output |
| 10 Port | TF card, 1 input and 2 output alarm,reset,RS485 |
| USB Port | Support USB WIFl/4G module to connect |
| General | |
| Power Supply | DC12V /PoE (option) |
| Size | 38*38mm |
| Working Temperature | -10℃~50℃ |
| Working Humidity | 0%~90% |
反面
Definition Interface
| DIP2: Light board port | |
| 1 | IR-ENLDR input |
| 2 | LED-ALARM Red Blue alarm output |
| 3 | PWM1 Infrared output |
| 4 | PWM0 Warm light output |
| DIP1: IR cut port (No) | |
| 1 | IR-CUT connection 1 |
| 2 | IR-CUT connection 2 |
| DIP3: Audio Port | |
| 1 | GND Ground |
| 2 | AIN MIC Audio Input |
| 3 | GND Ground |
| 4 | AOUT Audio Output (no amplifier) |
| DIP4: Power supply input and network port | |
| 1 | DC12V DC12V+ |
| 2 | GND DC 12V- |
| 3 | RJ1-TN Green |
| 4 | RJ2-TP White Green |
| 5 | RJ3-RN Blue |
| 6 | RJ6-RP White Bule |
| 7 | LINK Network connection situation indicator(ON) |
| 8 | ACT Network connection situation indicator(flicker) |
| DIP5: Expansion function port | |
| Flat headcable port | Support expansion TF storage, alarm, RS485, WIFI, reset, etc |
| DIP6: USB port | |
| 1 | GND D- |
| 2 | USB D+ |
| 3 | USB D- |
| 4 | VCC D+ |
| DIP7: Motorized lens port | |
| 1 | FOCUS-A- |
| 2 | FOCUS-A+ |
| 3 | ZOOM-A- |
| 4 | ZOOM-A+ |
| 5 | ZOOM-B+ |
| 6 | ZOOM-B- |
| 7 | FOCUS-B- |
| 8 | FOCUS-B+ |
| DIP8: Series port | |
| 1 | TXD |
| 2 | RXD |
