该页无缩略图
EU R32 Aqua Falcon Inverter Air Cooled Chiller
Superior Performance
Inverter Water Pump
Wide Wing-Shaped Fan Blades
CFD simulation technology is used to optimize the fan blades, achieving high air volume with low noise.
DC Brushless Motor
Stable performance and low-noise operation.
EVI Inverter Scroll Compressor
1.Pressure Relief Design
Prevents excessive compression and enhances part-load performance.
2.Jet Check Valve
Reduces pressure pulsations and boosts the impact resistance of the jet pipeline.
3.Sliding Bearing
Better carrying capacity and lower noise.
4.High Efficiency Centralized Coil Motor
Higher efficiency and reliability.
5.Gear Oil Pump & Filter
In line with the oil supply design of large displacement compressor, the anti-impurity ability is improved.
High Efficiency
Energy efficiency class up to A+++, complying with the European ERP requirements.
Wide Operation
-20°C Cooling
The fan's logic control system is optimized for stable single-fan operation at an ultra-low temperature of -20°C. This enhancement ensures the modular chiller operates with enhanced stability, significantly reducing start-stop cycles and improving overall operational efficiency.
Stable & Reliable
Multiple Certifications
Designed specifically for the European market, this unit meets all relevant EU certification standards.
Enclosed Electrical Box
Protects internal components from external environmental factors and ensures long-term product durability.
Sands Protection
Mosquitoes Protection
Rain & Snows Protection
Low Noise Design
Three-layer Insulation
Widen Beam Reduces noise and vibration caused by the compressor
Thickened Chassis
Provide reliable support and reduce noise generation
Anti-clogging
Equipped with filter and provided with water quality guidelines, ensuring stable and efficient system operation.
Filter
Water Quality
When well or river water is used as chilled water, it can lead to significant sediment accumulation, such as limescale and sand deposits. Therefore, well water or river water must be filtered and softened using a water softening device before being supplied to the water system. If sand and clay settle in the evaporator, they may block chilled water circulation, causing the evaporator to freeze. If the hardness of the chilled water is excessively high, limescale buildup is likely to occur, which may result in equipment corrosion. Therefore, the quality of the chilled water should be analyzed before use, including parameters such as pH value, conductivity, chloride ion concentration, and sulfate ion concentration.
Smart Running
The system features automatic load distribution, reducing high-load operation and cutting total power consumption.
Rotating Operation
Intelligent sequential operation balances the operating hours of all systems and modules, extending service life and enhancing reliability.
Backup Operation
In the event of a system fault, the backup operation function automatically activates redundant systems, ensuring uninterrupted operation for end users.
Dust Removal
Fully protected against summer dust accumulation, the unit automatically initiates its dust removal function to maintain high-efficiency heat exchange, ensuring stable, reliable, and worry-free operation at all times.
11-layer Anti-freeze Protection
Multiple layers of anti-freezing protection eliminate concerns about water system freezing.
Smart Defrost
Advanced intelligent defrost control minimizes the impact on the entire system.
Snow-blowing
Fully protected against winter snow accumulation, the unit automatically initiates its snow removal function to maintain high-efficiency heat exchange, ensuring stable, reliable, and worry-free operation of the entire system at all times.
Smart & Intelligent
Wired Controller
· Supports 12 languages
· Two colors optional (Black and White)
· Customized logo
Temperature Curve
High flexibility | Eliminates the need for frequent target temperature adjustments.
Smart Timer
Operating modes can be pre-set on daily and weekly schedules, enabling automatic switching between Turbo, Standard and ECO modes to meet user comfort and energy efficiency requirements
Cascade Max. 16 Units
Modular design, flexible combination more convenient for design and installation.
Variable Controls
The modular chiller can be connected to thermostats (Cooling and Heating), remote control signals, and fire alarm signals, enabling more intelligent operation.
Modbus
Modbus port pins are pre-reserved on the PCB, ensuring full compatibility with RS485 communication protocols.
USB Commissioning
Following initial chiller configuration for a project, parameters can be copied to a USB flash drive. These parameters can then be quickly imported and applied to subsequent similar projects via USB, significantly improving installation efficiency.
APP Control
OTA Upgrade
Engineers can complete firmware updates, parameter adjustments, and fault repairs remotely via the cloud without needing to be on-site, significantly reducing travel and labor costs.
USB Upgrade
In the absence of internet, the system supports USB one-click insertion for updates, ensuring seamless operation with minimal manual intervention.
Power Limitation
This power limiting function is designed to accommodate grid voltage fluctuations in specific regions, ensuring stable and uninterrupted operation for commercial applications.
IOT Platform
Real-time operation data monitoring and analysis; Remote equipment health assessment and potential fault detection; Improved module reliability and operational stability.
Easy Maintenance
Hydraulic Kit
Without Hydraulic Kit
· Lower weight for transportation
· Easier for maintenance
With Hydraulic Kit
· Lower installation cost
· Shorter debugging time
Pipe Clamp
All water pipes are connected via quick-release pipe clamps, enabling fast, tool-free replacement and assembly.
Ultimate Installation Distance
Thanks to optimized design of the air ducts, fan blades and condenser, the minimum installation clearance is reduced to 600 mm.
Rotated E-box
The upper section of the electrical enclosure features a rotatable design, allowing quick and easy access to internal components for simplified maintenance.
Horizontal Concealed Fan Coil Unit
Steel Plate Multi-blade Centrifugal Impeller
Axial air intake; generates air pressure via rotation; small, numerous blades ensure uniform air output, large air volume and low noise.
AC Brushless Motor
Enables high, medium, and low three-speed control.
High-efficiency Return Air Box
Independent aerodynamic design optimizes air return; volute ring plate with reinforcing ribs reduces noise, saves energy and cuts power consumption.
High-efficiency Heat Exchanger
Advanced tube expansion tech applied; seamless copper tubes with high-efficiency double-flanged aluminum fins expanded into one unit; features high heat transfer efficiency, sufficient cooling/heating capacity, good hydrophilicity, excellent drainage and strong corrosion resistance.
One-piece Formed Condensate Pan
Spray-painted for rust prevention and long service life; smooth drainage without leakage; extended pan covers inlet/outlet pipe and valve piping space for effective water collection.
8-Way Cassette FCU-D Series
LCD wired controller Optional
Air filter: Synthetic removable and washable
Unit body: Galvanized steel with pre-formed expanded polystyrene air passages,fresh air intake;
Panel assembly: Aesthetic panel design, in ABS material; Curved rounded corners and 3D squares leather pattern which make the panel looks on a high level and can match a variety of decoration styles; Digital display on the panel and using the current most popular light transmittance design; The panel and the unit are connected by 4 Angle buckles, making installation and maintenance more convenient;
Heat exchanger: Copper tubes and hydrophilic aluminum foils with an exhaust valve.
Drain Pan: Thermoforming high density expanded polystyrene condensate drain pan
•Drain Pump:12Ocm head drain pump, with no return valve and float switch
Fan/Motor:Centrifugal fan with3 speed motor
Control System: With PCB can be installed built-in, With PC motherboard with power-off memory function, with 485 power collection
Control(Optional)
