DRIVING

CIRCULARITY

CIRCULAR PRODUCTS FOR

YOUR EVERYDAY APPLICATIONS

With an expanding network of recycling partners,

Borouge provides customers with a comprehensive

range of circular products, including recycled

polyolefins sourced from reputable sources with

reliable recycling capabilities and technologies.

These recycled polyolefins go through stringent trials

and testing, safeguarding product characteristics

and performance, offering high quality that are

suitable for high-value applications.

BOROUGE PORTFOLIO OF

CERTIFIED RECYCLED POLYOLEFINS

Borouge works closely with its recycling partners

to enhance the efficiency and effectiveness of

the supply for recycled polyolefins, implementing

stringent quality control measures, to meet evolving

customer needs. Deep collaboration with the value

chain promotes a circular economy, and ensures

that customers receive recycled solutions of superior

and consistent quality.

As a responsible petrochemical company, Borouge

has committed itself to explore and drive opportunities

towards a circular economy. We work closely with our

customers and value chain partners to support them

in achieving their own sustainability commitments.

At Borouge, we continue to provide and develop

solutions that are fully recyclable, and have enhanced

our product portfolio with mechanically recycled

polyolefins to cater to growing market demand

for sustainable solutions across a wide range of

applications.

Borouge is certified by Global Recycled Standard (GRS), an independent third-party

validation for recycled content and chain of custody, providing assurance to customers

on the authenticity and quality of recycled polyolefins.

INNOVATION MEETS SUSTAINABILITY

Borouge’s circular portfolio comprises products from post-industrial and post-consumer polyolefin sources.

With expertise in product development, marketing, and application technical knowledge, Borouge actively

engages the value chain to address the increasing demand for recycled polyolefins.

Read more on the results of the Life Cycle

Assessment for the Circular HDSS solution here.

*LCA conducted by independent third-party, TUV Rheinland,

compared to HDSS made from 100% virgin material.

48%

reduction

in carbon

emission

45%

in energy

savings

Up to

30%

less water

consumption

MADE OF

Post-Consumer

HDSS

Recyclates

As a one-stop shop solutions provider, Borouge:

Offers a full portfolio of virgin polyolefin

grades suitable for Design for Recyclability

solutions

Leverages its virgin PP and PP products

to incorporate higher recycled content in

solutions to achieve desired mechanical

properties and processability

Provides a comprehensive range of

high-quality recycled polyolefins with

assured quality

Ensures efficient utilisation of recycled

content with suitable partners and

integrated formulations

Maintains a consistent and reliable supply

of recycled offerings through its network

of recycling partners

*Not intended for food contact applications, unless specified.

RECYCLED POLYOLEFINS

AND SUITABLE APPLICATIONS

Mechanical recyclate offerings on PP and PE for diverse applications

Heavy duty

shipping sacks (HDSS)

Secondary packaging Lamination

(Collation shrink film,

stretch film)

General purpose film

FLEXIBLE

CLOSED-LOOP SOLUTION

FOR HEAVY DUTY SHIPPING SACKS

TANGIBLE SUSTAINABLE BENEFITS

Lower Carbon Footprint with Recycled Polyethylene

RIGID

Bottles Caps & closures Houseware Transportation

packaging

(Crate, pallet)

Industrial pails

POLYPROPYLENE

Product Name Colour MFR

230°C, 2.16kg

(g/10min)

ASTM D1238

Tensile Strength

at Yield

(MPa)

ASTM D638

Tensile Modulus

(MPa)

ASTM D638

Impact Strength

(Refer to footnote

for impact test method)

Applications Key Performance Certification

(Refer to legend at bottom of the page)

Availability at

targeted regions

Polypropylene Injection Moulding

PPH-CCF-10 Natural 15 (+/-5) > 27 > 1200 > 25 A Injection moulding and tubular quench film applications Optimal flow, stiffness and impact balance GRS AS

(except Thailand)

PPH-CCF-10-FDA Natural 15 (+/-5) > 27 > 1200 > 25 A Injection moulding and tubular quench film applications Optimal flow, stiffness and impact balance FDA LNO, GRS MEA,

AS (except Thailand)

PPH-BKF-10-80 Black 15 (+/-5) > 25 1180 +1 > 80 A Injection moulding applications Optimal flow, good impact GRS AS (except Thailand)

PP GG102 White 12 (+/-4) 34 +1 1730 +1 2.5 +B Injection moulding applications Optimal flow, good impact – MEA

PP GG103 Grey and Black 11 (+/-1) 30 1720 +1 22 A Injection moulding and cast film applications Good flow, good mechanical properties – MEA

Polypropylene Extrusion

PPC-BKA-01 Black 3 (+/-2) > 20 1270 +1 > 550 Injection moulding, blow and profile extrusion

applications Optimal melt stability, high impact GRS AS (except Thailand)

PPC-WCA-01 White 3 (+/-2) > 20 1000 +1 > 550 Injection moulding, blow and profile extrusion

applications Optimal melt stability, high impact GRS AS (except Thailand)

POLYETHYLENE

Product Name Colour MFR

190°C, 2.16kg

(g/10min)

ASTM D1238

Density

(g/cm3)

ASTM D792

Flexural Modulus

(MPa)

ASTM D790

Impact Strength

(Refer to footnote

for impact test method)

Applications Key Performance Certification

(Refer to legend at bottom of the page)

Availability at

targeted regions

Extrusion Blow Moulding and Film

HD-CCA-01 Natural 0.3 (+/-0.05) > 0.94 650 (+/-50) > 220 A Blow and profile extrusion, general film applications Optimal melt stability, stiffness and impact balance GRS AS (except Thailand)

HD-CCA-01-FDA Natural 0.3 (+/-0.05) > 0.94 650 (+/-50) > 220 A Blow and profile extrusion, general film applications Optimal melt stability, stiffness and impact balance FDA LNO, GRS AS (except Thailand)

HD-BD-P201 Blue 0.02 – 0.04 0.94 – 0.96 1250 +2 15.8 +B Blow moulding extrusion for capacity up to 200L,

profile extrusion applications Ultra high impact – MEA

HD-B-N-P225 Natural 0.20 – 0.25 0.94 – 0.96 1360 +2 8.6 +B Blow moulding extrusion for <20L capacity,

profile extrusion applications High impact and stiffness – MEA

HD-B-W-P203A White 0.14 – 0.18 0.94 – 0.98 1290 +2 5.5 +B Blow moulding extrusion for <20L capacity,

profile extrusion applications Optimal impact and stiffness – MEA

PE GG003 Black 0.2 – 0.5 0.9 – 0.98 1050 +2 8.4 +B Blow extrusion, profile extrusion for non-pressure pipe,

general film applications High impact – MEA

HD-BF-NAT 02 Natural 0.27 – 0.31 0.93 – 0.95 – – General blown film applications Good processability, stiffness and impact balance GRS MEA

Extrusion Film and Lamination

LF77B Natural 0.21 – 0.84 0.43 – 0.95 – – General film, lamination, shrink film applications Optimal melt flow GRS MEA,

AS (except Indonesia)

LLEF55B Natural 0.5 – 1.98 0.43 – 0.95 – – General film, lamination Good melt flow, good stiffness GRS AS (except Indonesia)

PCR-LDPE-A-ML Natural 1.0 3 0.920 4 – – General film, lamination, shrink film applications Optimal melt flow, stiffness and impact balance GRS MEA,

AS (except Malaysia)

PCR-LLDPE-A-ML Natural 1.6 3 0.913 4 – – General film and lamination Good melt flow, stiffness and impact balance GRS AS (except Malaysia)

PCR-LLDPE-TA-ML Natural 1.6 3 0.913 4 – – General film and lamination Good melt flow, stiffness and impact balance,

optimal optics GRS AS (except Malaysia)

PE GG001 Natural 0.2 – 0.8 0.88 – 0.92 – – General film, lamination, shrink film applications Good flow, excellent optics – MEA

PE GG004 Black 0.3 – 0.9 0.9 – 0.95 – – General film application Optimal melt flow – MEA

LDPE AAA% Natural 1.11 0.93 – – General film and lamination Optimal melt flow stiffness and impact balance GRS, EuCertPlast (EU & UK),

APR PCR (US) AS (except Malaysia)

LDPE Black-B Black 0.77 0.84 – – General film application Good melt flow GRS, EuCertPlast (EU & UK),

APR PCR (US) AS (except Malaysia)

LLDPE AAA Natural 2.21 0.89 – – General film and lamination Good melt flow, stiffness and impact balance,

optimal optics

GRS, EuCertPlast (EU & UK),

APR PCR (US) AS (except Malaysia)

AS - Asia South includes Indian sub-continent, Southeast Asia, Australia and New Zealand MEA - Middle East and Africa GRS - Global Recycled Standard

FDA LNO - The United States Food and Drug Administration's (FDA) Letter of No Objection - for usage of up to 100% in manufacturing of articles under its specified conditions

of Uses E through G in food contact applications

All grades are not intended for food contact applications, unless specified.

+ Measured at Borouge innovation Centre

A ASTM D256A Izod impact test method, measured at J/m B ISO 179 Charpy impact test method, measured at kJ/m2

1 ISO 527 Tensile test method 2 ISO 178 Flexural test method 3 GB/T 3682 test method 4 GB/T 1033 test method

Borouge © 2023 11 PG BR 480 R EN

Borouge Pte Ltd

One George Street #18-01 Singapore 049145

Tel: +65 6275 4100 Fax: +65 6377 1233 Email: info@borouge.com

Disclaimer The information contained herein is to our knowledge accurate and reliable as of the date of publication. Borealis and Borouge extend no warranties

and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the consequences

of its use or for any printing errors. We do not recommend our products for single-use applications and it is the customer’s responsibility to inspect and test our

products in order to satisfy himself as to the suitability of the products for the customer’s particular purpose. The customer is also responsible for the appropriate,

safe and legal use, processing and handling of our products. Nothing herein shall constitute any warranty (express or implied, of merchantability, fitness for a

particular purpose, compliance with performance indicators, conformity to samples or models, non-infringement or otherwise), nor is protection from any law or

patent to be inferred. Insofar as products supplied by Borealis and Borouge are used in conjunction with third-party materials, it is the responsibility of the customer

to obtain all necessary information relating to the third-party materials and ensure that Borealis and Borouge products, when used together with these materials,

are suitable for the customer’s particular purpose. No liability can be accepted in respect of the use of Borealis and Borouge products in conjunction with other

materials. The information contained herein relates exclusively to our products when not used in conjunction with any third-party materials.

About Borouge Plc

Borouge Plc, listed on the Abu Dhabi Securities Exchange (ADX symbol: BOROUGE /

ISIN AEE01072B225), is a leading global polyolefins company that provides innovative and

differentiated polyolefin solutions for the infrastructure, energy, mobility, healthcare, agriculture

and advanced packaging industries. Borouge employs more than 3,100 people and serves

customers in over 86 countries across Asia, the Middle East and Africa.

Founded in 1998 through a strategic partnership between ADNOC and Borealis, Borouge was

formed to build and operate a polyolefins complex in Al Ruwais Industrial City, United Arab

Emirates, which today is one of the world’s largest integrated polyolefin complexes. ADNOC

owns a majority 54% stake and Borealis holds a 36% stake in Borouge.

To find out more, visit: borouge.com