Up to 7 Million images/

second capture speed

924 x 768 pixel,

10-bit sensor resolution

180 images

50ns minimum

shutter

The Ultimate High-Speed Video Camera

The Specialised Imaging KIRANA is a true

Ultra high-speed video camera that combines

the flexibility of a video camera with the

speed/resolutions approaching those only

available with Framing cameras.

The unique custom design sensor offers 180

images at capture speeds up to 7 Million

Images/second at full resolution.

In line with high-speed video cameras the

KIRANA can be Frame synchronised with an

external device such as another KIRANA or

laser.

The KIRANA can also be recording prior to

the event and triggered before, during or

after the event.

Kirana1M Up to 1 Mfps

Kirana5M Up to 5 Mfps

Kirana7M Up to 7 Mfps

FEATURES

F Up to 7 Million images/second

F Adjustable exposure down to 50ns

F Pre & Post event triggering

F External synchronisation

F Nikon lens mount fitting

F Gigabit ethernet communications

F Compact and rugged design

The Ultimate High-Speed Video Camera

MODEL SPECIFICATION

Kirana1M

Frame Rate

(Frames per second)

Up to 1 Mfps Up to 5 Mfps Up to 7 Mfps

Exposure Time

(minimum)

1µs

10ns step

100ns

10ns step

50ns

10ns step

Trigger Mode Start on Trigger, Stop on Trigger

(user defined post trigger frames)

Kirana5M Kirana7M

INTENSIFIER / SENSOR

Sensor µCMOS

Number of Active Pixels 924 (W) x 768 (H)

Pixel Size 30µm

Digitisation 10bits

Number of Frames 180

INPUT / OUTPUT SIGNALS

Trigger (2 off) Electrical signal (BNC connector)

Threshold variable from ± 25V

Maximum Input level 50V

Integrated velocity timing system

Positive or Negative polarity, Make/Break

50Ω or 1KΩ termination

Video Out XVGA

Aux Out FSync or user programmable pulse width

and position for strobe/laser illumination

sources. TTL into 50Ω

Sync In Input to allow the synchronisation of

two cameras in Master-Slave configuration

Camera Control Remote control via Standard 1Gbps

Ethernet

Software Custom software compatible with

Microsoft Windows Operating Systems for

control and data archiving in various file

formats

Electrical input Mains 100-240V AC 50-60Hz

Saved Image Format TIFF, JPEG, AVI or RAW

ENVIRONMENTAL

Storage temperature -10°C to +50°C

Operating temperature -5°C to +40°C

Humidity 10—90% RH non condensing

Vibration shock 10—40 Hz Max. 10g in any direction

EMC Meets all UKCA/EU harmonised standards

OPTICAL

Lenses Nikon F-Mount

Shutter Electro-mechanical

Distortion Zero

TIMING PARAMETERS

System Clock 200MHz quartz crystal controlled

Exposure time 1µs, 100ns or 50ns – 1/Frame rate

Framing rates 1000fps - 1Mfps / 5Mfps / 7Mfps

MECHANICAL

Dimension mm (w/d/h) Head:

22.8cm x 42cm x 19cm (without lens)

Power supply:

19.5cm x 39.5cm x 19.5cm (inc. handle)

Weights Head:

10.6Kg (23lbs) without lens.

Power Supply:

4.8Kg (10.5lbs)

Head Mounting 3/8-16 UNC Female in base.

SIL-7000-01-Q01

凌云光技术股份有限公司

地址：北京市海淀区翠湖南环路13号院7号楼知识理性大厦

电话：400 829 1996

传真：010-52349666

邮箱：marketing@lusterinc.com

FM 87429

Tracker Lite

Developed from the award winning

Trajectory Tracker2

system

Multiple tracking modes

Manual positional adjustment

Integrated high-speed

camera options

Compact High-Speed Linear Tracker System

The Specialised Imaging TrackerLite is a smaller, lighter system

that retains the core functions of the Award winning Tracker2

system.

Simplification of the Tracker2 system includes manual

alignment adjustment with projectile flightpath, and three

inputs for real time projectile velocity variation adjustment.

Mounted on heavy, stable tripod, the fully weatherproof

mirror/camera housing allows smaller high-speed video

cameras with long focal length lenses to be used.

Custom software controls the Tracker and triggering set up,

provides calculators for camera fields-of-view and depth of

focus for different cameras, lenses and Tracker locations.

FEATURES

F Multiple operating modes

allow capture of decelerating,

accelerating, user defined

velocity profiled projectiles

F Scan ratio (SR) range from

1 to 40 (Optional 1 to 100)

F Typical scanning accuracy

of ± 0.2o

.

F Gigabit ethernet

communications

F Built in camera power,

communications and trigger

F No calibration required

TrackerLite Compact High-Speed Linear Tracker System

MIRROR

Type Optical flat elliptical surface silvered

Size (HxW) mm 135 x 85

OPERATING PARAMETERS

Scan Ratio (SR) 1 to 40, or 1 to 100

(defined as the ratio of projectile velocity/

stand-off distance)

Scanning range (Max.) -50º to +50 º

Scanning Distance ≥ 2 x standoff distance (shortest distance

between Tracker and line of flight)

Scanning Accuracy ± 0.2o

(SR>80 accuracy ± 0.5o

)

Calibration Not required

Projectile Velocity SR x Standoff distance

Projectile Drag 0 to 100 m/s/m

Acceleration Angle 1° - 5° depending on scan rate

(defined as the angle required to accelerate

the mirror from rest to full scanning speed)

CONTROL UNIT

System Clock 10MHz quartz crystal controlled

Trigger Jitter <1us

INPUT / OUTPUT SIGNALS

Detector In BNC

Number of inputs 3

Trigger In Make/Break, Positive or Negative edge,

Threshold variable to ± 17V

50Ω or 1KΩ termination

Camera Trigger TTL positive pulse

Communication

Interface

Data and command transfer via 1Gbps

ethernet cable

Software Custom software compatible with Microsoft

Windows Operating Systems for control and

data archiving in various file formats

Electrical input Mains 100-240V AC 50-60Hz

ENVIRONMENTAL

Storage temperature -10°C to +74°C

Operating temperature -5°C to +45°C

Warmup Period Not Required

Humidity 10 - 90% RH non-condensing

Operational vibration 10G, 10-40Hz Max, any direction

EMC Meets all UKCA/EU harmonised standards

OPERATING MODES

MECHANICAL

Dimensions mm (w/d/h) 650 x 230 x 310 (without tripod)

Weight 16kg / 35lbs (without camera and lens)

Mount 3/8-16 UNC Female

Fixed Velocity Single trigger using known velocity

Velocity The scan is corrected using the measured

velocity from at least 2 of the 3 available

detector inputs.

Position The scan position is corrected from the

detector inputs. Known velocity is assumed.

Drag The scan is corrected using the measured

velocity and drag from 3 detector inputs.

Pre-defined profile Programmable Velocity Vs Time curve.

Triggered using single trigger. Used for nonlinear projectile trajectories.

Advanced User Functions Specialised Imaging is prepared to

customise modes of operation to user

requirements.

Skewed Geometry Allows non perpendicular operation

SIL-4400-01-Q01

凌云光技术股份有限公司

地址：北京市海淀区翠湖南环路13号院7号楼知识理性大厦

电话：400 829 1996

传真：010-52349666

邮箱：marketing@lusterinc.com

As part of our on-going commitment to improvement we reserve the right to alter specifications, designs or figures, without prior notice. All dimensions and weights are approximate.

FM 87429

Tracker 2

Award winning flight follower system

Multiple tracking modes

Remote control motorised adjustment

Multiple high-speed

camera options

Comprehensive High-Speed Linear Tracker System

The Specialised Imaging Tracker2

is

the next generation of projectile

tracking platforms for high-speed

video and measurement.

Full motorised remote control of three axis

rotation and multiple inputs for real-time

velocity adjustment contribute to the evolution

of this award-winning system.

Built on a sturdy mount, the fully weatherproofed mirror

and camera housings allow a large range of high-speed

video cameras and long focal length lens options.

Custom software controls the Tracker system and

provides calculators for Tracker placement, camera

fields-of-view and velocities.

FEATURES

F Full remote control operation

F Multiple operating modes

allow capture of decelerating,

accelerating, user defined velocity

profiled projectiles

F Scan ratio range from 0.1 to 100

F Scanning accuracy of ± 0.2o

F Gigabit ethernet communications

F Built in camera power,

communications and trigger

F No calibration required

MIRROR

Type Optical flat elliptical Silicon Carbide Mirror

Size (HxW) mm 135 x 85 x 2

OPERATING PARAMETERS

Scan Ratio (SR) 0.1 to 100

(defined as the ratio of projectile velocity/

stand-off distance)

Scanning range (Max.) -60º to +60 º

Scanning Distance >=2x standoff distance (distance from the line

of flight to Tracker2)

Scanning Accuracy ±0.2º

Positional Accuracy ±0.018°

Calibration Not required

Projectile Velocity SR x Standoff distance

Projectile Drag 0 to 100 m/s/m

Acceleration Angle 1° - 5° depending on scan rate

(defined as the angle required to accelerate the

mirror from rest to full scanning speed)

CONTROL UNIT

System Clock 10MHz quartz crystal controlled

Trigger Jitter <1us

INPUT / OUTPUT SIGNALS

Detector In BNC

Number of inputs 8

Trigger In Make/Break, Positive or Negative edge,

Threshold variable to ± 17V

50Ω or 1KΩ termination

Camera Trigger TTL positive pulse

Communication

Interface

Data and command transfer via 1Gbps ethernet

cable length 100m (standard). Other lenths

available 1000FX fibre optic ethernet link (up to

2Km) - optional

Software Custom software compatible with Microsoft

Windows Operating Systems for control and

data archiving in various file formats

Electrical input Mains 100-240V AC 50-60Hz

ENVIRONMENTAL

Storage temperature -10°C to +74°C

Operating temperature -5°C to +50°C

Warmup Period Not Required

Humidity 10 - 90% RH non-condensing

Operational vibration 10G, 10-40Hz Max, any direction

EMC Meets all UKCA/EU harmonised standards

OPERATING MODES

Fixed Velocity Single trigger using known velocity

Velocity The scan is corrected using the measured

velocity from at least 2 of the 8 available

detector inputs.

Position The scan position is corrected from the

detector inputs. Known velocity is assumed.

Drag / Acceleration The scan is corrected using the measured

velocity and drag / acceleration from at least

3 of the 8 available detector inputs.

Pre-defined profile Programmable Velocity Vs Time curve.

Triggered using single trigger. Used for nonlinear projectile trajectories.

Advanced User

Functions

Specialised Imaging is prepared to

customise modes of operation to user

requirements.

Skewed Geometry Allows non perpendicular operation

Tracker2

MECHANICAL

Dimensions mm (w/d/h) 1340 x 670 x 590 (without tripod)

Mount Tripod Included

Comprehensive High-Speed Linear Tracker System

SIL-4200-01-Q01

凌云光技术股份有限公司

地址：北京市海淀区翠湖南环路13号院7号楼知识理性大厦

电话：400 829 1996

传真：010-52349666

邮箱：marketing@lusterinc.com

FM 87429

Tripods

TP-G TP-H TP-S

A range of tripods

designed to work

with Specialised

Imaging cameras

and systems

Strong, thick walled

anodized tubular

construction

guarantees years of

reliable performance.

Large diameter footprint offer

stable platforms. A selection of heads

to suit any Specialised Imaging camera or system.

Unsurpassed in quality and reliability, they provide

micro control for Pan and Tilt movements with

handwheels and counter balancing stainless steel

springs. All control knobs are located for

the operator’s convenience.

TRIPOD STANDS

TRIPOD HEADS

DESCRIPTION MAX

LOAD

MAX

HEIGHT

MIN

HEIGHT

WEIGHT COLUMN

TRAVEL

TP-G8 Tripod with Column 91kg

200 lb

216 cm

85 in

105 cm

41.5 in

18.9 kg

41.6 lb

53.3 cm

21 in

TP-G6 Tripod with Column 91kg

200 lb

165.1 cm

65 in

76.2 cm

30 in

15 kg

33.5 lb

53.3 cm

21 in

TP-H8 Tripod with Column 68kg

150 lb

178cm

70 in

80.3cm

31.6 in

11kg

25.4 lb

45cm

18 in

TP-H6 Tripod with Column - Short 68kg

150 lb

144cm

57 in

66cm

26 in

9.6kg

21.2 lb

45cm

18 in

TP-H7BQ Tripod with Column - Extended height 68kg

150 lb

393.7cm

155 in

190.5cm

75 in

20.9kg

46 lb

44.4cm

17.5 in

TP-H2 Pedestal - mobile 36kg

80 lb

142cm

56 in

96.5cm

38 in

15.9kg

35 lb

45cm

18 in

TP-S7 Tripod with column 18.2kg

40 lb

193cm

76 in

86.4cm

34 in

4.5kg

10 lb

45cm

18 in

DESCRIPTION MAX

LOAD

DIMS WEIGHT PAN TILT PLATE

& SCREW

TPH-G7

Geared head

with vemier slide

90.9kg

180 lb

31.8 x 25.4 x 33cm

12.5 x 10 x 13 in

9.5kg

21 lb 360º 53\" Up

67\" Down

Fixed plate

20 x 25.4 cm

8x10 in

Male Thread

3/8 in - 16

TPH-H3

Geared head with

platform

22.7kg

50 lb

24.6 x 19.8 x 28.4 cm

9.7 x 7.8 x 11.2 in

5.5kg

12 lb 360º 45\" Up

45\" Down

Fixed plate

22.5 x 15 cm

9 x 6 in

Male Thread

3/8 in - 16

TPH-H9

Geared head with

calibrations

13.6kg

30 lb

24.1 x 22.9 x 26.7 cm

9.5 x 9 x 10.5 in

4.2kg

9.3 lb 360º 45\" Up

90\" Down

Fixed plate

10 x 10 cm

4 x 4 in

Male Thread

1/4 in – 20

TPH-S3

Geared head

and slide tilt

11.4kg

25 lb

21.6 x 16.5 x 15.2 cm

8.5 x 6.5 x 6 in

1.1kg

2.5 lb 360º 45\" Up

90\" Down

Fixed plate

16.5 x 21.6 cm

6.25 x 8.5 in

Male Thread

1/4 in-20

Tripods Supporting Specialised Imaging cameras and systems

SIL-9905-01-Q01

凌云光技术股份有限公司

地址：北京市海淀区翠湖南环路13号院7号楼知识理性大厦

电话：400 829 1996

传真：010-52349666

邮箱：marketing@lusterinc.com

FM 87429