该页无缩略图
2
6
0
0
8
02
16
40
7
0
3
5
5
00
25
50
6
8
5
26
36
58
90
9
5
8
3
48
56
96
46
96
01
9
97
22
85
360
413
528
75
05
36
00
20
40
95
35
00
30
95
25
2
50
80
8
60
5
11
55
60
85
85
3
35
93
68
95
84
0
56
55
80
50
85
4
2
36
2
60
65
70
5
0
90
5
5
72x6
856
M90x6
r105X6
r115X6
r130X6
d
Adjustable Swaged
Fixed Swaged
Note: Suggest to use spherical hinged shim at screw end.
eifiti
The above specifications are the corresponding sizes of ordinary cables. For the specifications and
he below format is the cable length that one adjusting end normally can adjust(L),if the
eeded cable length is more tht n
Stoag：
. Instllon:
Stainless Steel Tension Cable Using Instructions
) When lifting, for the small diameter tension cable, please straight the cable reverse to pay-off spool;
or the big diameter tension cable, pay-off while lifting, the lifting speed shal be same as pay-off spe
o make sure lift up the tension cable naturally. Prohibit vertical lift directly before the cable pay-off
aturally. If the cable is spiral when lting, the lifting work must be stop immediately. It can go on only
fter the cable is in a natural state, please lift and pay-off with folk-lift or manpower if no pay-off spool is
vailabe. Two anchors on both sides should be p
efore lifting, please check the thread engagement of the adjustable anchor, the thread engagement
f tension cable shoud be smoothly without stress, If cant goes smoothly, then should find the reason
nd eliminate them. Common problems are like thead out of shape, thread damage, having sand & soil
n the thread. Solution refer to maintain with file, clear with steel brush, change t
tainless steel tension cable has high strength, good corrosion resistance, and high stiffness characteristic
rightness appearance can maximum reflect metallic texture. It gets most of architects & clients approva.
herefore, stainless steel tension cable gets widely application in construction cable structure
fter the tension cable ship to the construction site, it shal be inspected as soon as possible.
f not use immediately afer the inspection qualified, the product st i
) Tension cable deposit location should be indoors, storage environment should be ventilated, dry, no acid,
kali, salt and water vapor in high temperature which bad medium could lead to stainless steel corrosion.
uch as the storage time more than one month, then half a month need to unpacking check regularly, to
heck if the surface is rust. If there is any rust, need to fnd and eliminate the cause of the corrosion products,
) If the indoor storage conditions are not available, please pay attention to the above attentions and
ake waterproof protecton. Besides weather enclosue or rain cover, please pad the product to
revent rainwater from the bottom into the packages. If packages get wet, the product must be cleaned
e ih
ease kept the packages for a period of time after taking out the tension cables for installation. The
est tension cables must be stored in the o
i
) There is no need to use pay-off spool if the cable is short or have the enough space. Concrete operi
are: keep the pay-off spool still, lift the anchor and pay-off opposite to the spool, then begin to lft.
) Once improper lifting operation caused cable warp, wire skip, strands loose o
professional person to repair and check whether the product is available.
) After the cable lifting at proper position, confirm the length and dimension to make sure no dismounting any
3. Construction protection：
ension cable should be handled gently on site, no throw or drop products, in order to avoid collision between
products or damaged by other hard products; During the installation, the product should also be well protected
to prevent scratches and crash, especially the thread part of the tension cable.
(2) During installation,try to avoid welding or cross-operation. If have to, protection measures should be taken to
avoid welding spark or slag to splash down to the surface of the tension cable. Particular attention is that cable
can not be used as a welding lead.
(3) If there are multi-cross operations on site, please protect the surface of tension cables away from cement
mortar, coating and other pollutants of other type of works. If the products getting pollution and corrosion,
4. Maintenances：
(1) Surface cleaning:
Stainless steel means it can have certain chemical stability around the corrosion mediums of air, water, acid,
alkali, salt or others. But it does not mean the stainless steel will never rust. When come into service, the dust
and other pollutants on product surface may lead to stainless steel corrosion and even rupture. Therefore,
stainless steel tension cable must be regularly and daily cleaning. Regular cleaning cycle should within one
year; daily cleaning cycle depends on the pollution, if it will cause corrosion, then cleaning or clearing. Since
tension cable is multi-gap structure, liquid like water and detergent is not allowed to spray on it, please wring
the wet towel out or clean it with few detergent on the soft fabric.
Please pay attention to the following points during maintenance:
①In any case, it is forbidden to clean with chlorinated solution (such as bleaching fluid, 84 disinfectant and etc.).
When chlorinated solution be used for other purpose (e.g. disinfection), the stainless steel should also be in a good
protection.
② Stainless steel gets rust is not only concerned with pollutants, but also with the ambient temperature, humidity
atmospheric composition and so on. If the product get rust without any obvious pollutants, besides timely rust
(2) Others:
Any product maintenance (such as prestress inspection and adjustment and etc.) doesn't mention above, please
Instruction of Stainless Steel Tension Cable of
\"Easy extension\" Series
Steel bar ( length
Please pay attention to the following matters
when tensioning the cable:
1. Before tensioning, the thread should be checked again
2. Before tensioning, make sure the exposed thread
4. During tensioning, it is recommended to hand screw or
screw by inserting steel bar (L≤300mm) into wrench
hole. Normally, one hand can easily turn the screw (no
more than 5KG force). If the above method can not
easily turn the screw, it may cause by improper tools or
5. It is forbidden to add extension bar, chain wrench, pipe
wrench or any similar tools to screw. If any operation
against above causes tension difficulty or product
ypical Fittings for Cable
Customized Products
Customized Products
1. We compiled this catalogue carefully, and based on familiarity and under
standing to our products currently, The information in this catalogue is
correct and reliable, but if any inadequacy in the catalogue, welcome to
2. Please be informed and understood that some contents are a little different
from previous versions. We suggest selecting the products from the latest
version. Please contact our local offices to check the production and
storage information if the req uested products are in the previous versions.
After publication, KIN LONG may update some product improvements (as
applicable), which will not affect the use functions. Subject to technical
changes without further notice. If you can't select suitable product
parameters/ characteristics or any other doubt in the catalogue, please
contact our local offices directly or access to our website
.kinlong.com for further information.
Statement
l rghs rserved
0086-769-82166666 82136666
: 0086-769-82955240
: mail@kinlong.com
gdg Kg H,
