PointSupported Glass Curtain Wall Typical
Poduct Catalgoue
e Fh tl & St idr Fitig Itllti idr Fig Itlt gratd Flt Cp Rtl t Cp Rt t ls Dillig ad Alim Sl lid Rt 0 Pi Sid 3Cbl sid Fid Fn Gs Dg Rf Ctd Pd Ru ti l s Dd Cn Wl Sy Rfid stl ctl sst Cbe Sid C Stt B f b S B f d Sts Stl n Rd Pds fr Stl Fs Gls Sg Cl Sts Stl n Cb Od Pin D Ptn Kig D
1246905346024504823 4 6
Contents
Surface Fnish
Material & Standard
ield strength is 2 times higher than common austenitic stainless steel. Having enough ductility and toughness to f
) Compared with the austenitic stainless steel, which has the similar alloy content, its surfa
) Having the superior anti-stress corrosion cracking (SCC) ability, generally, it won't lead to stress corros
) Material 2205 coefficient of linear expansion is close to carbon steel and reinfo
=4 x
=2
=1 x
=
Common Calculation Formula
Y
Spider Fitting Installation
Internal Threaded
External threaded
1.Welding the external threaded sleeve on the steel structure after talking off the internal threaded sleeve
2.Adjusting internal threaded sleeve to appropriate position.then tighten up locking ring.
3.Putting Bolt through the center hole of spider
4.Adjusting installation position of spider,then compressing spider tightly with bolt.
5.Dismantling parts like screw nut and eccentric washer, ect,marking the front part of routel fixed on the glass.
6.Pre-adjusting hexagon nut, spring washer, eccentric washer to the required position for installation.
7.Eccentric washer to be placed on the spider and adjusted according to the requirement of installation, slot hole
should be transverse when loading and. should be vertical without loading, and the long hole faces down.
8.Putting the thread rod of routel through the hole of spider
bespoke nut.
Point-Fixed Glass Curtain Wall System
(steel structure)
Fin Spider Fitting Installation
Step-by-Step Installation
Step-by-Step Installation
2.Put the nylon sleeve into the fin glass hole, a set of spider and rubber washer to cover on the fin glass(or steel
structure), then the screw assembly with spring washer and cap nut to be screwed through the base plate of the
3.The other rubber washer and fin spider to sleeve on the other side of the exposed screw
o install the other set of screw assembly with the same method. Use hexagon wrench to fix the screw when
7.Eccentric washer to be placed on the spider and adjusted according to the requirement of installation, slot hole
8.Putting the threaded rod of routel through the ear hole of the spider
Point-Fixed Glass Curtain Wall System
(Fin structure)
he Available
y
TRecommended
lue of Load
My
he Available
TRecommended
lue of Load
Material: Ordinary 304+Q235
The surface treatment of the base is for
My
6
TF11X
18
— 5
000
00
F11X
14
-18
5
000
Integrated Flat Cap Routel
he Available
Recommended
lue of Load
6、3
Siz he Available
Recommended
lue of Load
、3
y
5
Customization means that the product does not have inventory and needs to be produced and supplied according to the order
Siz he Available
Recommended
ue of Load
Flat Cap Routel (Customization)
Recommended
ue of Load
he Available
i
y
5
33
59
M14
15-23
4500
2000
Fastening glue is suggested to used when installing the countersunk socket head cap screw of exterior installation routel.
Customization means that the product does not have inventory and needs to be produced and supplied according to the
order requirements.
x≤ y≤
TF41
2500
1200
l
Siz he Available
Recommended
lue of Load
Recommended
lue of Load
he Available
Fastening glue is suggested to used when installing the countersunk socket head cap screw of exterior installation routel.
Customization means that the product does not have inventory and needs to be produced and supplied according to the
y
y
he Available
TRecommended
lue of Load
M
Size he Available
Recommended
ue of Load
Countersunk Routell (Customization)
Fastening glue is suggested to used when installing the countersunk socket head cap screw of exterior installation routel.
Customization means that the product does not have inventory and needs to be produced and supplied according to the
TF11X、ATF12
Glass Drilling and Alu. Sleeve
The above drilling dimension is only for reference;
2. Considering the potentially manufacturing error for laminated glass, dif
he above drilling dimension is only for reference;
2. Considering the potentially manufacturing error for laminated glass, dif
F
Spliced Routel (Customization)
The Recommended
alue of Load
Tastening glue is suggested to used when installing the countersunk socket head cap screw of exterior installation routel.
Customization means that the product does not have inventory and needs to be produced and supplied according to the
Z15
18
18
5L1
8
Connector
35
36
8
4
1
1
M8
M20
46
46
1
36
36
72
72
17
0
20
l
Siz
Si
del
Siz
Si
Si
The surface treatment of the base is for anti-corrosion during storage and transportation, extra anti-corrosion surface
o
P-Z Series
① ②
utel
nnect
The standard length of connector is L=90mm.
he surface treatment of basement is f
Connector assembly
he connector without the outer screw sleeve can be ordered directly a
Spider (Customization)
stomization means that t
Recommended
alue of Load
y
y
Spider model is consisted of Series number + Arm Code, like GZ250XFD4, GZ250XFD21 and so on.
ustomization means that t
uThe
Rcommended
ue of Load
l terl: 3M
A160ASeries
A200ASeries
200ASeries
A220ASeries
220ASeries
≤ ≤
160
200
200
220
220
40
40
50
50
50
24
24
26
26
12.5
20
20
A250ASeries
250ASeries
C250ASeries
A300ASeries
250
250
250
300
50
50
50
50
26
26
26
26
20
22
27
28
1500
2000
2000
2000
2000
800
800
1000
1000
1200
2000 1200
2500
4000
2500
1500
1500
2500
Spider model is consisted of Series number + Arm Code, like A160A4, A160A21 and so on.
ustomization means that t
te order requirements.
Model
Size
The
commended
ue of Load
Material: CF8MCF8 Material: CD3MN
u
The Recommended
alue of Load
stomization means that t
ustomization means that t
Recommended
alue of Load
Φ26
45
ustomization means that tl
Recommended
alue of Load
y≤
060HTC Series
600
300
40
x≤ F
upider model is consisted of Series number + Arm Code, like 3060HA4, 3060HA21 and so on.
ustomization means that t
Customized according the project
Ra
The
commended
ue of Load
Model
Size
M
stomization means that t
Secommended
alue of Load
inimum angle between two msα≥36°;
ecommended
alue of Load
ustomization means that t
te order requirements.
Carbon steel spider (Customization)
Fin Spider (Customization)
RThe Recommended
alue of Load
、n glass thickness of standard code T19mm.
lease place the order with note of r
according to the bolt dimension.
ustomization means that t
The Recommended
alue of Load
n glass thickness of standard code T=19mm.
ease place the order with note of r
according to the bolt dimension.
ustomization means that t
、
220A Series
20
7
pider model is consisted of Series number + Ar
n glass thickness of standard code T=19mm.
lease place the order with note of r
according to the bolt dimension.
ustomization means that t
Size Material: CD3MN The
Recommended
alue of Load
The Recommended
alue of Load
glass thickness of standard code T=19mm.
ease place the order with note o
according to the bolt dimension.
ustomization means that t
n
The Recommended
alue of Load
n glass thickness of standard code T=19mm.
lease place the order with note o
according to the bolt dimension.
ustomization means tha
glass thickness of standard code T1=19mm.
ease place the order with note o
according to the bolt dimension.
ustomization means that t
The Recommended
alue of Load
Fin Glass Drilling Diagram
n ote:
Recommend to drill the hole 6-10mm
Injecting the drilling hole
Recommend to drill the hole
When installing the glass fin sus
bgger than the bolt diameter;
When installing the glass fin s
inected into the glass hole;
-
Customized Product
、n glass thickness of standard code T1=19mm.
Facade glass thickness for standard items is: 8≤T≤26mm;
lease place the order with note of r
Recommended
ue of Load
Suggesting to fill in screw
fastening glue when taking
Suggesting to fill in screw
fastening glue when taking
S
empered
Clamp
Steel
Regular Curtain Wall System
Regular Curtain Wall System
Single-layer Cable Net Glass Curtain Wall System
n cable
red
sion
ered
Tension cable
Single-layer Cable Net Glass Curtain Wall System
Single-layer Cable Net Glass Curtain Wall System n cable
red
Tension cable
red
Single-layer Cable Net Glass Curtain Wall System
Cable Truss Glass Curtain Wall System Strut bar for
n cable
fixed end
Tension cable
Bracket
Cable Truss Glass Curtain Wall System
Rod Truss Glass Curtain Wall System Strut bar for
Rod Truss Glass Curtain Wall System
dheiv
Middle glass fin
Bottom glass fin
Steel Fin Glass Curtain Wall System
l g
Bk
Steel Fin Glass Curtain Wall System
Steel Fin Glass Curtain Wall System




