该页无缩略图
TKRH25准双曲面齿轮减速马达 TKRH25HYPOIDGEARREDUCTIONMOTOR
| 框号 | 减速比 | 输出轴容许转矩 | 输出轴容许 | ||||||
| 0.1kW | 0.2kW | 0.4kW | O.H.L | ||||||
| N.m | Kgf.m | N.m | Kgf.m | N.m | Kgf.m | N.m | Kgf | ||
| TKRH25 | 1/5 | 3.1 | 0.31 | 1 | / | 1 | 1300 | 135 | |
| 1/10 | 5.2 | 0.66 | 11 | 1.1 | / | / | 1520 | 155 | |
| 1/15 | 7.7 | 0.79 | 17 | 1.7 | 33 | 3.4 | 1720 | 175 | |
| 1/20 | 11 | 1.10 | 23 | 2.3 | 44 | 4.5 | 1860 | 190 | |
| 1/25 | 13 | 1.30 | 27 | 2.8 | 55 | 5.6 | 2010 | 205 | |
| 1/30 | 16 | 1.60 | 33 | 3.4 | 67 | 6.8 | 2110 | 215 | |
| 1/40 | 21 | 2.10 | 44 | 4.5 | 67 | 6.8 | 2300 | 235 | |
| 1/50 | 25 | 2.60 | 55 | 5.6 | 67 | 6.8 | 2450 | 250 | |
| 1/60 | 31 | 3.20 | 67 | 6.8 | 67 | 6.8 | 2550 | 260 | |
| 1/80 | 39 | 4.00 | 84 | 8.6 | 2550 | 260 | |||
| 1/100 | 49 | 5.00 | 105 | 10.7 | 2550 | 260 | |||
| 1/120 | 59 | 6.00 | 105 | 10.7 | 2550 | 260 | |||
| 1/160 | 78 | 8.00 | 105 | 10.7 | 2550 | 260 | |||
| 1/200 | 98 | 10.00 | 105 | 10.7 | 2550 | 260 | |||
| 1/240 | 101 | 10.30 | 105 | 10.7 | 2550 | 260 | |||
TKRH30准双曲面齿轮减速马达 TKRH3OHYPOIDGEARREDUCTIONMOTOR
| 框号 | 减速比 | 输出轴容许转矩 | 输出轴容许 | ||||||
| 0.2kW | 0.4kW | 0.55kW | O.H.L | ||||||
| 1/5 | N.m 5.5 | Kgf.m | N.m | Kgf.m | N.m | Kgf.m | N.m | Kgf | |
| 0.56 | 11 | 1.1 | 1520 | 155 | |||||
| 1/10 | 11 | 1.1 | 23 | 2.3 | / | / | 1760 | 180 | |
| 1/15 | 17 | 1.7 | 33 | 3.4 | 46.2 | 4.62 | 1910 | 195 | |
| 1/20 | 23 | 2.3 | 44 | 4.5 | 61 | 6.17 | 2060 | 210 | |
| 1/25 | 27 | 2.8 | 55 | 5.6 | 72 | 7.2 | 2160 | 220 | |
| 1/30 | 33 | 3.4 | 67 | 6.8 | 92 | 9.2 | 2400 | 245 | |
| 1/40 | 44 | 4.5 | 88 | 9 | 92 | 9.2 | 2550 | 260 | |
| TKRH30 1/50 | 55 | 5.6 | 111 | 11.3 | 92 | 9.2 | 2650 | 270 | |
| 1/60 | 67 | 6.8 | 133 | 13.6 | 92 | 9.2 | 2840 | 290 | |
| 1/80 | 84 105 | 8.6 | 169 | 17.2 | 2990 | 305 | |||
| 1/100 | 10.7 | 211 | 21.5 | 3090 | 315 | ||||
| 1/120 | 126 169 | 12.9 17.2 | 211 211 | 21.5 21.5 | 3090 3140 | 315 | |||
| 1/160 | 176 | 17.9 | 211 | 21.5 | 3140 | 320 | |||
| 1/200 | 213 | 21.7 | 211 | 21.5 | 3140 | 320 320 | |||
| 1/240 | |||||||||
TKRH35准双曲面齿轮减速马达 TKRH35HYPOIDGEARREDUCTIONMOTOR
| 框号 | 减速比 | 输出轴容许转矩 | 输出轴容许 | ||||||
| 0.4kW | 0.75kW | 1.1kW | O.H.L | ||||||
| N.m | Kgf.m | N.m | Kgf.m | N.m | Kgf.m | N.m | Kgf | ||
| TKRH35 | 1/5 | 11 | 1.1 | 1 | / | 1 | / | 1960 | 200 |
| 1/10 | 23 | 2.3 | 41 | 4.2 | / | 2450 | 250 | ||
| 1/15 | 33 | 3.4 | 63 | 6.4 | 92.5 | 9.3 | 2740 | 280 | |
| 1/20 | 44 | 4.5 | 83 | 8.5 | 123 | 12.3 | 2990 | 305 | |
| 1/25 | 55 | 5.6 | 104 | 10.6 | 154 | 15.4 | 3190 | 325 | |
| 1/30 | 67 | 6.8 | 124 | 12.7 | 185 | 18.5 | 3280 | 335 | |
| 1/40 | 88 | 9 | 166 | 16.9 | 247 | 24.7 | 3480 | 355 | |
| 1/50 | 111 | 11.3 | 208 | 21.2 | 308 | 30.8 | 3480 | 355 | |
| 1/60 | 133 | 13.6 | 249 | 25.4 | 370 | 37.2 | 3480 | 355 | |
| 1/80 | 169 | 17.2 | 316 | 32.2 | 370 | 37.2 | 3480 | 355 | |
| 1/100 | 211 | 21.5 | 395 | 40.3 | 370 | 37.2 | 3530 | 360 | |
| 1/120 | 253 | 25.8 | 473 | 48.3 | 370 | 37.2 | 3530 | 360 | |
| 1/160 | 270 | 27.6 | 473 | 48.3 | 3630 | 370 | |||
| 1/200 | 329 | 33.5 | 473 | 48.3 | 3630 | 370 | |||
| 1/240 | 386 | 39.3 | 473 | 48.3 | 3630 | 370 | |||
TKRH45准双曲面齿轮减速马达 TKRH45HYPOIDGEARREDUCTIONMOTOR
| 框号 | 减速比 | 输出轴容许转矩 | 输出轴容许 | ||||||||
| 0.75kW | 1.1kW | 1.5kW | 2.2kW | O.H.L | |||||||
| N.m | Kgf.m | N.m | Kgf.m | N.m | Kgf.m | N.m | Kgf.m | N.m | Kgf | ||
| TKRH45 | 1/5 | 21 | 2.1 | / | / | / | / | 2940 | 300 | ||
| 1/10 | 41 | 4.2 | 61.7 | 602 | 83 | 8.5 | / | 1 | 3630 | 370 | |
| 1/15 | 63 | 6.4 | 92.5 | 9.3 | 124 | 12.7 | 182 | 18.6 | 4070 | 415 | |
| 1/20 | 83 | 8.5 | 123 | 12.3 | 166 | 16.9 | 244 | 24.9 | 4460 | 455 | |
| 1/25 | 104 | 10.6 | 154 | 15.4 | 208 | 21.2 | 305 | 31.1 | 4700 | 480 | |
| 1/30 | 124 | 12.7 | 185 | 18.5 | 249 | 25.4 | 366 | 37.3 | 4750 | 485 | |
| 1/40 | 166 | 16.9 | 247 | 24.7 | 332 | 33.9 | 487 | 49.7 | 4750 | 485 | |
| 1/50 | 208 | 21.2 | 308 | 30.8 | 416 | 42.4 | 487 | 49.7 | 4750 | 485 | |
| 1/60 | 249 | 25.4 | 370 | 37.2 | 498 | 50.8 | 487 | 49.7 | 4750 | 485 | |
| 1/80 | 316 | 32.2 | 493 | 49.5 | 498 | 50.8 | 487 | 49.7 | 4750 | 485 | |
| 1/100 | 395 | 40.3 | 617 | 61.7 | 498 | 50.8 | 487 | 49.7 | 4750 | 485 | |
| 1/120 | 473 | 48.3 | 740 | 74.2 | 498 | 50.8 | 4750 | 485 | |||
| 1/160 | 554 | 56.5 | 925 | 92.5 | 498 | 50.8 | 5190 | 530 | |||
| 1/200 | 650 | 66.3 | 925 | 92.5 | 498 | 50.8 | 5190 | 530 | |||
| 1/240 | 735 | 75.0 | 925 | 92.5 | 498 | 50.8 | 5190 | 530 | |||
安装方位图INSTALLATIONPOSITIONSDIAGRAM
技术资料TECHNICALDATA
| 项目ltem | 三相交流马达3-PhaseMotor | 单相交流马达1-PhaseMotor | |||
| 防护等级 Protection | 全密闭外扇形IP-54 Totally EnclosedFan CooledType | 半密闭外扇形 Semi-EnclosedFan Cooled Type | |||
| 外壳材质 Housing Material | 0.1KW-2.2KW 1/8HP-3HP | 铝合金 Alumalloy | 0.1KW-0.75KW 1/8HP-1HP | 铝合金 Alumalloy | |
| 起动方式 Staring | 全压起动 Direct Start | 0.1KW-0/2KW | 运转电容起动Capacitor | ||
| 连续运转 | 0.4KW-0.75KW 1/2HP-1HP | 起动电容+电子开关 | |||
| 工作方式 Timerating Continuous Running | 连续运转 Continuous Running | ||||
| 绝缘等级 Insulation | F-绝缘 F-Class | F-绝缘 F-Class | |||
| 适用环境 Environment | 温度：-10~+40℃ Temperature Between-10~+40℃ 湿度：90%以下 HumidityLessThan90% | ||||
| 适用电压 Voltage | |||||
| 50Hz | 220V,230V240V380V 50Hz | 110V,115V, 200V, | |||
| 适用极数 | 220V,240V,380V,415V 60Hz | 440V,460V,480V,600V | 60Hz | 110V.220V,240V | |
| Pole 输出转速(4p) | 4P,6P,8P | 4P | |||
| 50Hz | 1350-1450rpm | 50Hz | 1350-1450rpm | ||
| Output Speed 依据标准 | 60Hz 1650-1740rpm 国标/国家标准IEC-34，CNS-10919 | 60Hz | 1650-1740rpm | ||
| Standard 海拔 | |||||
| Sealevel 接线盒 | 1000米 Under1000m | ||||
| Terminal Box | 采用IP55级防水型铝合金接线盒 With IP-55ClassWater-proof AluminumTerminal Box | ||||
技术资料TECHNICALDATA
| 输出功率 Power | 50Hz-4P | 60Hz-4P | ||||||||
| 220V | 380V | 415V | 440V | RPM | 220V | 380V | 440V | 460V | RPM | |
| 0.1KW 1/8HP | 0.60 | 0.40 0.32 | 0.30 | 1420 | 0.6 | 0.40 | 0.30 | 0.29 | 1720 | |
| 0.2KW 1/4HP | 1.2 | 0.7 | 0.70 | 0.58 | 1420 | 1.1 | 0.63 | 0.55 | 0.52 | 1720 |
| 0.4KW 1/2HP | 2.0 | 1.1 | 1.13 | 1.07 | 1420 | 1.9 | 1.10 | 0.95 | 0.91 | 1720 |
| 0.55KW 3/4HP | 2.85 | 1.65 | 1.73 | 1.58 | 1420 | 2.8 | 1.6 | 1.55 | 1.52 | 1720 |
| 0.75KW 1HP | 3.5 | 2.0 | 1.94 | 1.84 | 1420 | 3.4 | 1.96 | 1.70 | 1.63 | 1720 |
| 1.1KW 1.5HP | 4.0 | 2.3 | 2.4 | 2.37 | 1420 | 3.9 | 2.25 | 2.32 | 2.28 | 1720 |
| 1.5KW 2HP | 6.3 | 3.64 | 3.49 | 3.30 | 1420 | 6.1 | 3.53 | 3.05 | 2.92 | 1720 |
| 2.2KW 3HP | 9.1 | 5.3 | 4.74 4.47 | 1420 | 8.7 | 5.04 | 4.35 | 4.16 | 1720 | |
| 输出功率 Power | 50Hz-4P | 60Hz-4P | ||
| 220V | RPM | 220V | RPM | |
| 0.1KW 1/8HP | 1.1 | 1410 | 1.1 | 1720 |
| 0.2KW 1/4HP | 1.5 | 1410 | 1.5 | 1720 |
| 0.4KW 1/2HP | 4.0 | 1420 | 3.9 | 1720 |
| 0.75KW 1HP | 6.7 | 1420 | 6.4 | 1720 |
| 1.5KW 2HP | 11.5 | 1430 | 11.7 | 1720 |
| 输出功率 | 运转电容 | 起动电容 |
| 0.1KW 1/8HP | 8uF-450V | |
| 0.2KW 1/4HP | 12uF-450V | |
| 0.4KW 1/2HP | 14uF-450V | 100uF-250V |
| 0.75KW 1HP | 20uF-450V | 200uF-250V |
| 1.5KW 2HP | 50uF-450V | 400μF-250V |
输出轴OUTPUTSHAFTS
| TKRH | dh6 | B | B1 | B2 | G1 | L | L1 | f | b1 | t1 |
| 25 | 25 | 50 | 54.2 | 50.8 | 115 | 173 | 220 | M10*25 | 8 | 28 |
| 30 | 30 | 50 | 55 | 51 | 128 | 187 | 234 | M10*25 | 8 | 33 |
| 35 | 35 | 60 | 65 | 62 | 146 | 216 | 273 | M10*25 | 10 | 38 |
| 45 | 45 | 80 | 85 | 82 | 160 | 250 | 327 | M10*25 | 14 | 48.8 |
扭力臂TorqueArm
| TKRH | NZ | N | NA | NH |
| 25 | 100 | 14 | 52.5 | 10 |
| 30 | 150 | 14 | 59 | 10 |
| 35 | 200 | 25 | 68 | 20 |
| 45 | 200 | 25 | 75 | 20 |
防尘盖Cover
| TKRH | N2 |
| 25 | 70 |
| 30 | 78 |
| 35 | 88 |
| 45 | 95 |
连接图CONNECTIONDIAGRAM
（B）三相马达附直流刹车器接线图
（C）三相轮流风机接线图
（D）单相三条线马达接线图
（E）单相四条线马达接线图
（F）单相轮流风机接线图
连接图CONNECTIONDIAGRAM
与变频器的组合CombinedWithFrequencyConverter
可以使用频率范围Frequencyrangecanbeused
一般请在5\~120Hz范围内使用。
（注：当频率低于30Hz时，电机表面温度会较高。
·超过60Hz高速运转时的注意事项在超过60Hz的高速运转中，振动、噪音将会增加。另外转速加快会降低油封的使用寿命。
·低速运转时注意事项低速运转中，由于电动机的冷却效果低下经常会引起温度的异常上升，请格外注意。(请将电动机表面温度控制在 8 0 ^ { \circ } C 以下。）
In general,please use the 5\~120Hzrange.
Note:when the frequencyis lower than 3oHz,the surface temperaturewill be highe
·Moreattentionthanthe6oHzhighspeedoperationVibration andnoisewillbe increasedin thehighspeedoperationof more than 6 0 H z .Inaddition,thespeedwillbeaccelerated to reduce the lifeof theoil seal.
·Lowspeedoperationmattersneedingattention Lowspeed operation,duetothecoolingeffectofthemotorisoften causedbytheabnormaltemperaturerise,pleasepayextra attentionto.(Please control themotorsurface temperature below 8 0 ^ { \circ } C ) 1
电动机的转矩力特征(使用限度）Torquecharacteristicsof themotor(Limit)
电动机的转矩力特征(使用限度)根据所使用的变频器的种类及控制方法的不同而产生巨大差异。
Torquecharacteristicsofthemotor (Uselimitcaused greatdifferencesaccording tothe typesandcontrollng methodsused bydifferentfrequencyconverter.
带电磁制动时Withelectromagnetic brake
制动部配线请与变频器(变频器的输入侧供电)并联。(输出侧电旺变动可能会引起制动部的运行不稳定状况。）连接图标记如下，请加以参照
Thewiringofthebrakeunitis inparalelwiththeinputsideof theconverterflnverter).(Theoutputsidevoltagefluctuation may cause the brake partto run unstable.) Connection icon in mind as follows,please refer to.
用变频器驱动380V电动机时Whenthe 380Vmotor isdrivenbyfrequencyconverter 电动机端子间会发生浪涌电压，可能会导致电动机绝缘 性能的劣化。为防止浪涌电压，一般采用抑制电压增 强（输出电抗器）和抑制波高值（输出滤波器）两种 方法。
·输出电抗器配线较短时，可在变频器的输出侧设置AC电抗器，通过抑制电压的增强从而减弱浪涌电压。如果配线过长则难以抑制电压的高波值。
·输出滤波器在变频器的输出侧设置滤波器，可以抑制电动机端子电压的高波值。
Surge voltage can occur between the motor terminals,which mayleadtodeteriorationof the insulationperformanceofthe motor.Inorder to prevent the surge voltage,by suppressing voltageenhancement(outputreactor)and suppress the peak value(output filter) twomethods.
·Output reactor Wiring shorter,can be set at the output side of theinverterACreactor,through thesuppression of voltage enhancementtoreduce the surgevoltage.If thewiring istoo long,it is difficult to suppress the high wave valueof vottage.
·Outputfitter
The filter canbe arrangedat the output side of the frequency converter,which can restrainthe highwavevalueof the terminal voltage of the motor.
煞车零件分解图BRAKEUNITSECTIONDIAGRAM
| U 00000 8.散热风叶 激磁线圈 摩擦风叶 2.固定螺丝 9.固定螺丝M 轴承固定盖 3.轴承固定盖 □ 间隙调整螺栓 5.马达承 10.单头圆键 轴健 11.间隙调整螺栓 A 目 固定螺丝 中 梅花片 目 12.刹车本体 刹车器电磁本体 6.伞型簧片 13.激磁线圈 压力簧片 7.定位销 定位销 出 游动间 14.导磁压板 游动间 摩擦来令片 0.4–0.7mm 15.来令片 0.4-0.7mm 电磁压力板 |
| 1 压力弹簧Pressure spring 9 固定键Key 轴承固定盖Fixedbearingpalte 11 调整螺栓Gapadjustmentbolt |
| 固定螺丝Fixed screw 10 |
| 2 3 |
| 固定螺丝Fixedscrew |
| 4 轴承Bearing 12 刹车本体Brake housing |
| 5 马达轴Motorshaft 13 激磁线圈Brakecoil |
| 6 伞型簧片Disc spring 14 导磁压板Friction plate |
| 7 定位销Fixed pin 15 来令片Friction brake disc |
| 8 散热风叶Fan |
| 煞车间隙调整Adjustbrakeclearance |
| 4 1.请先移除固定螺丝. |
| Pleaseremove two pieces fixed screws inadvance. 2.每向右调整一格，其间距缩小0.07-0.10mm. Every single positionadjustment brake clearance will |
| 输出马力 Capacity (HP) | 刹车制动力 Torque (kg-M) | 刹车间隙 Clearance (mm) | 刹车时间 Brake (SEC) | 释放时间 Release (SEC) | 刹车机圈Brake coiil | 重量 Weight （kg) | ||
| 电压Voltage (DC-V) | 电流AMP （A) | 阻抗OHM (2) | ||||||
| 1/4HP4P | 0.20 | 0.2-0.60 | 0.22 | 0.12 | 95±10% | 0.17 | 565 | 3.5 |
| 1/2HP4P | 0.40 | 0.2-0.60 | 0.24 | 0.13 | 95±10% | 0.28 | 336 | 4.0 |
| 1HP4P | 0.80 | 0.3-0.65 | 0.22 | 0.12 | 95±10% | 0.41 | 233 | 5.0 |
| 2HP4P | 1.50 | 0.3-0.65 | 0.28 | 0.15 | 95±10% | 0.57 | 167 | 6.0 |
| 3HP4P | 2.20 | 0.4-0.70 | 0.28 | 0.18 | 95±10% | 0.73 | 130 | 8.0 |
| 5HP4P | 4.50 | 0.4-0.70 | 0.28 | 0.18 | 95±10% | 0.73 | 130 | 10.0 |
| 7.5HP4P | 5.60 | 0.5-0.90 | 0.38 | 0.21 | 95±10% | 1.02 | 93 | 12.5 |
| 備注 Remark | 1.直流刹车器安装尺寸相同于原有标准马达DC brakeunitlengthsameasoriginal standard motor. 2.采用非石棉刹车来令片材质Adoptmaterialwithnon-asbestosbrakedisc. 3.军电压为dilabV:voltage:220V,380V,400V,415V,440V,460V. 5.选用配件Optionaldesign: a.可附加手动释放刹车装置Availableformanualreleasebrakesystem. b.可接受特殊定制DC刹车器及专用刹车机型Availableforspecialbrakedesign. | |||||||
实现装置小型化，节约开发成本TOACHIEVEMINIATURIZATION,SAVINGDEVELOPMENTCOSTS
直交轴减速电动机 Rightanglespeed reducermotor
※最适于节省空间
The most suitable to save space
负载轴与电动机部分成直角，故可节省作业空间。 The load shaftandtheelectricmotorareat rightangles, so theworkingspace canbe saved.
图为输出功率200W，减速比5的平行轴减速电动机与直交轴减速电动机的比较。
The figure is the comparison of the output power 200W, thereductionratioof5parallelshaftmotorand the speed reductionmotor.
安装自由度高的设计
Highdegreeof freedomofthedesign
(直交轴减速电动机)(Rightanglespeed reducer motor)
左右同心轴构造
Leftand right concentric axis structure
减速机的输出轴位于安装面上下方向的中心处的构造。
安装在输送的等装置的时候，不管安装方向是向左还是向右，都不需要改变安装孔的位置。
Theoutputshaftof thespeedreducerisarrangedatthecenter of the upper and the lower direction of the mounting surface. When installed in the conveyorand otherdevices,whether the installationdirectionisto theleftorright,donotneedtochange thelocationof the installation hole.
节约成本 Cost savings
中空轴减速电动机还简化了连结零件，从而可减少零件成本和组装工时。
The hollow shaft reductionmotorafso simplifies the connecting parts,thereby reducing the cost of partsand assembling working hours.
适合用于与变频器组合使用
Suitable foruse in combination with frequency converter
可实现低速至高速的广泛速度控制，而且速度受负载影响较小，速度控制更加稳定。
Canachieve low sped to high speed of the extensive speed control.And the speed is lessaffected by the load,thespeedcontrolismorestable.
中空轴减速电动机还简化了连结零件，从而可减少零件成本和组装工时。
The hollow shaft reduction motor also simplifies the connectingparts, therebyreducing the costof partsand assemblingworking hours.
相关计算CALCULATEDATA
| 连接方式Mode | 链接系数Factor |
| 链轮Sprocket | 1.00 |
| 齿轮Gear | 1.25 |
| 三角皮带Belt | 1.50 |
| 平皮带Flatbelt | 2.50 |
| 减速机负载等级Loadgrade | 每日运转时间（HRS)Dailyoperating hours | |||
| 1-2 | 3-8 | 9-15 | 16-24 | |
| 均一负载Uniform load | 0.80 | 0.90 | 1.20 | 1.30 |
| 中级冲击负载Mediumimpactload | 1.00 | 1.20 | 1.30 | 1.50 |
| 重级冲击负载Heavy impactload | 1.20 | 1.50 | 1.75 | 2.00 |
| V=速度 Speed(m/min) | E=效率Efficiency(%) | 1 Inch=2.54cm | |
| i=减速比Ratio | N2=出力轴转速(rpm) Outputshaft speed | 1Foot=12 Inch | |
| T=输出扭力(kg-m) Output torque | D=滚轮直径(mm) Rollerradius | 1KW=1000W 1KW=1.34HP | |
| K=连结系数Connecting factor | R=滚轮半径(mm) Rollerradius | 1KG-M=7.233FT-LB 1KG-M=86.8IN-LB | |
| F=荷重系数Servicefactor | KW1(HP1)=人力马力 Input capacity | 1KG=2.2LB 1LB=0.4536KG | |
| W=荷重(kg)Load | KW2(HP2)=输出马力 Output capacity | N1=人力回转速(r/min) Input shaft rotation speed | |
4)基本传动公式Basicformular
| 减速比Ratio | i=N2/N1 |
| 回转速度Rotationspeed(r/min) | N1=V/πD |
| 输出扭矩Outputtorque(kg-m) | T=WxR×K |
| 输入马力Input horsepower(公制Metric) | KW1=N×T/974 |
| 输入马力Inputhorsepower(英制Inch) | HP1=N×T/716 |
| 输入马力Output horsepower(公制Metric) | KW2=KW1×F/E |
| 输入马力Output horsepower(英制 Inch) | HP2=HP1×F/E |
| 输送速度(r/min)Transmissionspeed | V | 输送带摩擦系数Belytfrictioncoefficient | u |
| 滚轮直径(mm)Rollerdiameter | D | 链轮传动效率(%)Chaindriveefficiency | n1 |
| 载重量(kg)Load | W | 减速机传载效率(%)Reducertransmissionefficiency | n2=0.9 |
| 出力轴主动链轮齿数Outputshaftteeth | t1 | 输送机被动链轮齿数Conveyor passive sprocketteeth | t2 |
| 输送带所需扭力(kg-m)Reducertorque | T1 | 减速机减速比Reducerratio | 1 |
| 减速机扭力(kg-m) Reducer torque | T2 | 减速机出力轴会转速(r/min)Reduceroutputshaftrotationspeed | N2 |
| 荷重系数Service factor | F(查表2相关计算)F(Find table 2) | ||
| 输送机回转速(r/min)Transmissionspeed | N1=V/πD |
| 减速机出力轴回转速(r/min) Reduceroutputshaftrotationspeed | N2=N1×(t2/t1) |
| 减速机减速比(i) Reducerratio | 50hzl=1500/N2 60hzI=1800/N2 |
| 输送带所需扭力(kg-m) Belt torque | T1=W×D/2×μ/η1 |
| 减速机所需扭力(kg-m) Reducer torque | T2=T1×(t1/t2)/n2 |
| 考虑荷重系数减速马达扭力Gearmotor torque(Service factorbeconsider) | T3=T2×F |
| 功率(HP)Capacity | HP=T3×N2/716.2 |
键/键槽加工尺寸KEY/KEYWAYDIMENSION
| 轴径 Shaft DIA | 键Key | 键槽Keyway | ||||
| 新JIS规范 NewJISSPEC' | I旧JIS规范 OIdJISSPEC' | 新JIS规范 NewJISSPEC' (Shaft/Hole) | 旧JIS规范 OIdJISSPEC' (Shaft/Hole) | |||
| S | AxBxC | AxBxC | t1 | t2 | t1 | t2 |
| 11 | 4×4xC | 4×4xC | 2.51 | 1.81 | 2.501 | 2.01 |
| Φ14 | 5×5×C | 5×5×C | 3.00 | 2.30 | 3.01 | 2.501 |
| 18 | 6×6xC | 6×6×C | 3.51 | 2.81 | 3.501 | 3.001 |
| Φ19 | 6×6xC | 6x6×C | 3.501 | 2.801 | 3.501 | 3.001 |
| Φ20 | 8×7xC | 6×6×C | 3.51 | 2.801 | 3.501 | 3.51 |
| Φ22 | 8x7×c | 7×7×C | 4.02 | 3.302 | 4.02 | 3.502 |
| Φ24 | 8×7xC | 8x7xc | 4.002 | 3.32 | 4.0 | 3.52 |
| Φ28 | 8x7xC | 8×7×C | 4.002 | 3.32 | 4.002 | 3.502 |
| Φ30 | 8×7xC | 8×7xC | 4.02 | 3.32 | 4.02 | 3.502 |
| Φ32 | 10×8×C | 10×8×C | 5.002 | 3.3+02 | 4.52 | 4.02 |
| Φ35 | 10×8×C | 10×8×C | 5.0+02 | 3.32 | 4.52 | 4.0+02 |
| Φ40 | 12×8×C | 12×8×C | 5.002 | 3.32 | 4.52 | 4.02 |
| Φ45 | 14×9×C | 12×8×C | 5.502 | 3.82 | 4.52 | 4.02 |
| Φ50 | 14×9×C | 15×10×C | 5.502 | 3.802 | 5.02 | 5.52 |
| Φ55 | 16×10×C | 15×10×C | 6.0+02 | 4.302 | 5.0+02 | 5.5+02 |
| Φ60 | 18×11×C | 18×12×C | 7.0+2 | 4.40.2 | 6.00.2 | 6.52 |
| Φ75 | 20×12×C | 20×13×C | 7.502 | 4.92 | 7.02 | 6.5+2 |
| Φ90 | 25×14×C | 24×16×C | 9.002 | 5.402 | 8.002 | 8.502 |
| C尺寸推荐长度 | 6,8,10,12,14,16,18,20,22,25,28,32,36,40,45,50,56,63,70,80,90， 100，110，125，140，150，180，200，220 | |||||
| 国名 Country | 频率 (HZ) | 单相 1-Phase | 三相 3-Phase | 国名 Country | 频率 (HZ) | 单相 1-Phase | 三相 3-Phase |
| A阿tn | 50 | 220 | 220/380 | Jn | 50/60 | 100/200 | 200 |
| Au洲lia | 50 | 240 | 240/415 | 科威特 | 50 | 100/200 | 200 |
| A地 | 50 | 220 | 220/380 | 50 | 110/220 | 220/380 | |
| Ba加拉osh | 50 | 230 | 230/400 | 马来西亚 | 50 | 115/240 | 240/415 |
| 比时 | 50 | 127/220 | 220/380 | Netherands | 50 | 110/220 | 220/230 |
| 巴 | 5060 | 110/220/ | 220/380 | NewZeaand | 50 | 230 | 230/400 |
| 50 | 230 | 230/440 | 巴a斯 | 50 | 230 | 220/480 | |
| Cabodia | 50 | 120 | 220/380 | 沙d拉伯 | 5060 | 127/220 | 230/380 |
| i | 50 | 220 | 220/380 | 利 | 60 | 115/200 | 220/380 |
| c中na | 50 | 220 | 220/380 | sigapgre | 50 | 115/230 | 230/400 |
| 捷克 Czechoslovakia | 50 | 120/220 | 220/380 | 南非 South-africa | 50 | 220/230 | 220/380 |
| Denmark | 50 | 220 | 220/380 | 西旺 | 50 | 127/220 | 230/400 220/380 |
| 50 | 220 | 220/380 | switzerland | 50 | 220 | 230/400 | |
| Finland | 50 | 220 | 220/380 | Thaand | 50 | 110/220 | 220/380 |
| F法 | 50 | 115/127/ | 220/380 | 50 | 127/220/230 | 220/380 | |
| Gemany | 50 | 110/200 | 220/380 | 50 | 240 | 240/415 | |
| 希腊 | 50 | 220 | 220/380 | Vi越-Num | 50 | 127/220 | 220/380 |
| Hogong | 50 | 110/200/ | 220/380 | 加拿大 | 60 | 110/120 | 220/240/480 |
| Hungy | 50 | 220 | 220/380 | 哥伦比亚 | 60 | 110/220 | 220/380 |
| 冰nd | 50 | 220 | 220/380 | 巴a | 60 | 115/120 | 240 |
| 印度a | 50 | 230 | 220/480 | E瓜多尔 | 60 | 120/127 | 208/220 |
| Indnesia | 50 | 127/200 | 220/380 | 韩a | 60 | 100/200 | 200 |
| 伊拉克 | 50 | 220 | 220/380 | 秘 | 60 | 110/220 | 220 |
| 以色列 | 50 | 230 | 230/400 | PhlPnes | 60 | 110/220 | 220/440 |
| 意大利 | 50 | 127/220 | 220/380 | 美A | 60 | 120/240 | 240/480 |
销售点SalesOffice:
无锡WUXI电话/TEL:86-510-85342005传真/FAX:86-510-85342053
天津TIANJIN 电话/TEL:86-22-23859622 传真/FAX:86-22-23859623
四川SICHUAN 电话/TEL:86-28-61304688 传真/FAX:86-28-61304699
厦门XIAMEN 电话/TEL:86-592-5703299 传真/FAX:86-592-5703311
南昌NANCHANG 电话/TEL:86-791-88195999 传真/FAX:86-791-88167730
