WK-12AL

TP-8C

SYK-15

180°\*360°rotatable head, right angle driver head for maximum flexibility in confinedworking areas
●with high strength aluminum alloy body, easy to handle
●Allow unlimited driver orientation to simplify access to work area
·Develops 12tons of hydraulic force for easy punching, even in 3.5mm mild steel. PATTENT NO.: US8.667.790132

With high strength of steel body, durable and reliable Suitable for mild steel, plastic and aluminum plate up to 3.5mm

·with hand pump, hose and cylinder
·Suitable for mild steel, plastic and aluminum plate up to 3.5mm
·We can special make for round, square or rectangle punch&die

SYK-8B

CC-100

HCC-76

With hand pump, hose and cylinder
·Suitable for mild steel, plastic and aluminum plate up to 3.5mm
·We can special make for round, square or rectangle punch&die

·Punch up through 1.0\mathsf{mm} mild steel in one stroke. ●Aluminum head provides strength with minimum weight, reducing operator fatigue.Self-stripping design eliminates punch hang-ups. ●Automatically centers holes on standard studs.

·Punch up through 1.0\mathsf{mm} mild steel in one stroke. ·Aluminum head provides strength with minimum weight,reducing operator fatigue.Self-stripping design eliminates punch hang-ups. ·Automatically centers holes on standard studs.

CP-180B

CP-390

CP-700

Hydraulic operated pump to drive crimping head, Cutting head, punching head and cylinders The tool comes with the pressure 700kg/cm2 With 0.8m high pressure oil hose and PT 3/8" screw thread ·Hydraulic operated pump to drive crimping head, Cutting ·head, punching head and cylinders The tool comes with the pressure 700kg/cm2 ●With 2m high pressure oil hose and PT 3/8" screw thread

Hydraulic operated pump to drive crimping head, Cutting head, punching head and cylinders The tool comes with the pressure 700kg/cm2 With 2m high pressure oil hose and PT 3/8" screw thread

CP-700B

WP-700

●Hydraulic operated pump to drive crimping head, Cutting head, punching head and cylinders
●The tool comeswith the pressure 700kg/cm2
●With 2m high pfressure oil hose and PT 3/8" screw thread

● Two stage hydraulic system with fast feed and power stroke ●Both suit for hand or foot handle, the handle can snap backAutomatically With automatic retractionrelease valve inside,matched with foot eleased valve ●Safety valve inside to prevent overload 0 ·High strength aluminum alloybody,light weight

TFP-800

·Hydraulic foot pump to drive crimping head, cutting head, punching head and cylinders
·The tool comes with the pressure 700kg/cm?,
●Safety valve inside to prevent overload
●With 2m high pressure oil hose and PT 3/8" Screw thread

EB-700 Battery Powered Hydraulic Pump

Lightweight andportabledesignforoutdoorwork
·OLED display show Pressure value,Maintenance note, Battery percentage,Working cycles ect.
·Automatic retraction when operation is complete
·Manualretract if need
·Electronic sensor pressure control
·High performance 18V Li-ion battery
·Operates for crimping.cutting and punching heads
All tools and hydraulic hose with couplers,easy and quick to connect

ED-50RIV BatteryPowered Riveting Tool

●The rivet force can be stepless adjustable according to the size of rivet and the strength of therivet material
●Sudden suspend function can be controlled at any time, even can retract manually.
·According to ergonomic design with antislip handle.
·Micro computer control system with the feature of self-pressure inspecting. double protection during operation,counting and realize the exchange between computer with data by the converter.
●High performance Li-ion battery to provide stronger power source, no discharge memory effects,one time charge 300 timescan be effective forcrimping.

ED-50RIV BatteryPoweredRivetingTool

●The rivet force can be stepless adjustable according to the size of rivet and the strength of therivet material
●Sudden suspend function can be controlled at any time, even can retract manually.
·According to ergonomic design with antislip handle.
●Micro computer control system with the feature of self- pressure inspecting. double protection during operation, counting and realize the exchange between computer with data by the converter.
●High performance Li-ion battery to provide stronger power source, no discharge memory effects,one time charge 300 timescan be effective forcrimping.

SL-24 BatteryPoweredNutCutter

PZ-24 BatteryPoweredNutCutter

YP-24

SAFETYSYSTEMINSIDE

·Special tool for rusted nut, save time, save power suit for nut M8-M16

CPC-12A

For rebar cutting
Single stage pistonpump,imple structureasiertooprat
replaceable carbide blade, durable
Non-slip handle

CPC-16A

CPC-22A

·For rebar cutting
·Single stage piston pump, simple structure, easier to operate replaceable carbide blade, durable
·Non-slip handle
·Forrebar cutting
·Single stage piston pump, simple structure,easier to operatereplaceable carbide blade, durable
·Non-slip handle

ERC-20 BatteryPoweredRebarCutter

·Spark free cutting of rebar and steel rod.
·Lightweight and portable design for outdoor work.
●High performance brushless motor,runs cooler and more efficiently.
·Alternate reciprocating valve,suits for long-term continuous working.
·All tools can be controlled by one trigger and built-in stroke control device,the piston returns automatically when finish cutting,it makes the operation easier.
·Replaceable high hardness Alloy blade with unique design,and have a longer life time.
·The hand-held part and tool body can be rotated 360° with 4x90° damping rotator, which is suitable for narrow spaces.
·Aset up mesh protective baffle to reduce the risk of cutting off fragmentsflying out and cause injured.

ECH-20 Battery Powered Punching Tool

·Spark free punch f steel flt,teel angle,-steel,oprba.
·Lightweight and portable design for outdoor work.
·High performance brushless motor,runs cooler and more efficiently.
·Alternate reciprocating valve,suits for long-term continuous working.
·Built-in strokecontrol device,the pistonreturns automatically when finish punching. it makes the operation easier.
·Replaceable high hardness alloy punch dies suit for different punching shape.
●The hand-held part and tool body can be rotated 360° with 4x90° damping rotator, which is suitable for narrow spaces.
·Aset up mesh protective baffle to reduce the risk of cutting offragments flying out and cause injured.

RAC series, single-acting aluminum

Utilizing the latest in Alloy technology,high-strength coatings, seal design and bearing materials, the new Aluminum Cylinder line from ZUPPER can change the way you think about your cylinder applications. Our cylinders provide the strength of aluminum alloy with the lightweight, transportability and easy positioning of aluminum.

·Steelbaseplate and saddlefor protection against load-induced damage
·Dust ring stop the dust into cylinder during extension
·Integral stop ring prevents plunger over-travel and is capable of with standing the full cylinder capacity
·Multi-wearing ring prevent metal to metal contact, increasing cylinder life and resistance to side-loads of up to 10%
·Hard coat finish on all surfaces resists damage and extends cylinder life
·High-strength return spring for rapid cylinder retraction
·Combined seal reduced the friction,no creeping and extends cylinder life
●Handles included on all models

DESCRIPTIONOFPARTS

RAR-series, double acting aluminum cylinders

Utilizing the latest in Alloy technology,high-strength coatings, seal design and bearing materials, the new Aluminum Cylinder line from ZUPPER can change the way you think about your cylinder applications.Our cylinders provide the strength of aluminum alloy with the lightweight, transportability and easy positioning of aluminum.

·Steel baseplate and saddle for protection against load-induced damage
·Dust ring stop the dust into cylinder during extension
·Integral stop ring prevents plunger over-travel and is capable of with standing the full cylinder capacity
·Multi-wearing ring prevent metal to metal contact, increasing cylinder life and resistance to side-loads of up to 10%
●Hard coat finish on all surfaces resists damage and extends cylinder life
●High-strength return spring for rapid cylinder retraction
·Combined seal reduced the friction,no creeping and extends cylinder life
●Handles included on all models

DESCRIPTIONOFPARTS

RACH-series, hollow plunger aluminum cylinders

Utilizing the latest in Alloy technology.high-strength coatings, seal design and bearing materials, the new Aluminum Cylinder line from ZUPPER can change the way you think about your cylinder applications. Our cylinders provide the strength of aluminum alloy with the lightweight, transportability and easy positioning of aluminum.

·Steel baseplate and saddle for protection against load-induced damage
·Dust ring stop the dust into cylinder during extension
·Integral stop ring prevents plunger over-travel and is capable of with standing the full cylinder capacity
·Multi-wearing ring prevent metal to metal contact, increasing cylinder life and resistance to side-loads of up to 10%
·Hard coat finish on all surfaces resists damage and extends cylinder life
·High-strength return spring for rapid cylinder retraction
·Combined sealreduced the friction,no creeping and extends cylinder life
●Handles included on all models

DESCRIPTIONOFPARTS

RMC-super thin single acting hydraulic steel cylinder

·Low height is suit for working in narrowness;Short stroke can block up times and times ·The surface of plunger isfinished with chrome plate to protect the using of longevity of the product. · Plunger has the function of retracting automatically.

DESCRIPTION OF PARTS

RMC L-multistage hydraulic steel cylinder

·The stroke of RMC-L series are higher than RMC series

DESCRIPTION OFPARTS

RSC-single hydraulic steel cylinder

·The surface of principle axis is finished with chrome plate to protect the using of longevity of the product.
·Principle axis has the function of retracting automatically.
·Surface coating resists corrosion, extending cylinder life.
●Hardy underlay to avoid axis break when it is overloading.

DESCRIPTIONOFPARTS

RC-single acting hydraulic steel cylinder

·It hasthe characteristic of low collapsed height,if therequirement of stroke needs to be higher than RMC series,RC series is suit for this case.

·The surface of principle axis isfinished with chrome plate tc protect the using of longeity of the product. ·Plunger has the function of retracting automatically ·WRC rotary head, can work in bevel.

DESCRIPTIONOFPARTS

RCH series, Single Acting Hollow Plunger Steel Cylinder

·Steel base plate and saddle for protection the hollow piston and cylinder damage and increasing abrasion performance
·Dust ring stop the dust into cylinder during extension
·Floating type plunger prevents the block caused by slight unbalance loading of piston
·Step-limited piston prevents over-travel and is capable of stopping the spring compressed completely
·Wearring prevent metal tometal contact,increasing cylinder life and resistance to be scratched
·High-efficient seal extends cylinder life
·Handles included on all models

DESCRIPTION OF PARTS

6.Steel baseplate

HAND CRIMPING TOOL

·SuitforSleevetypeterminalsforinsulationandnon-insulation
·Precise pre-tension setting maintains constant crimp performance Less effort required due to new mechanical lever system
·All the necessary partshave been specially hardened

Tool kits(for coaxial cable) 5 die stes

T05H-5A

T03C-5D

Technical data

Adjustablepeeling thickness,usefor conductor,cable terminal and mid peeling

TAIZHOUJULITOOLS CO.,LTD. ADD:Xuan Men Industrial Estate,Yuhuan, Taizhou,ZhejiangProvince,317608,China Tel:+86-576-87301677/87301678 Fax:+86-576-87301690 Http://www.zuppertools.com E-mail:salesdjuli-tools.com