HH-300 HH-400 Electric Powered Crimping Tool

HH series are full consideration for the cost performance of users, the tool comes standard with 220V input voltage directly, 520W rated power, two stage hydraulic system, save the cost of the batteries with AC series motor, it is perfect experience at a reasonable cost.

1.Crimping head rotates 350°

2.Interchangeable crimping dies, suit for crimping Cu/Al cable and lugs

3.Two stage hydraulic system, AC Series motor with high efficiency.

4.OLED Data Display to show crimping time, maintenance reminding and fault code.

HZ-300 Manual Hydraulic Crimping Tool Easy to Operate,safety and Reliability

• The tool features a double speed action: a fast advancing speed for rapid approach to the connector and a slower speed with more powerful for crimping.

• The tool set with built-in safety valve, automatically pressure release and manual retract function, to ensure safe and reliable working.

The head can rotate 350°

• The tool make of high tensive aluminum alloy with light body, compact and powerful

With interchangeable Die

Manual retract Release in the middle of pressing, Quick reset
Head design. Flip top style closed working head. Rotates 350°

High tensive aluminum alloy handiness Smaller and lighter

Cu 16-300mm² Al 10-240mm²

APPLICATION: CUTTING

Φ40mm for Cu/Al cable and armoured Cu/Al cable.
Φ22.5-61.5mm in the 3.5mm mild steel

HZ-300 SAFETY SYSTEM INSIDE

•Flip top style closed working head. The head can rotate 350°

• Two stage hydraulic system

•Safety system inside, automatic pressure release when crimp is completed.

HZ-6OUNV MANUAL HYDRAULIC MULTI-FUNCTIONAL TOOL

•Flip top style closed working head. The head can rotate 350°

• Two stage hydraulic system

•One head for crimping, cutting and punching

• Safety system inside

ACCESSORIES:

Crimping dies: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm²

HZ-400 SAFETY SYSTEM INSIDE

• The tool features with C type head, it can rotate 350°

• Two stage hydraulic system

•Safety system inside, automatic pressure release when crimp is completed.

HT-150

SAFETY SYSTEM INSIDE

• Flip top style head, rotates 180°

With safety valve inside to avoid overload

THS-150

• Flip top style head, rotates 180°

With safety valve inside to avoid overload

CY0-6B

Up to 240mm²

• Quad-point indent crimping feature, no die required

• The head can rotate 350°

● With Safety valve, twist the active handle to release the pressure

Suitable for crimping tubular cable lugs and connectors“standard type" and fine and superfine stranded conductors to 240mm2

CY0-430

SAFETY SYSTEM INSIDE

Two stage hydraulic system with fast feed and power stroke, With Safety valve, twist the active handle to release the pressure

CY0-510B

SAFETY SYSTEM INSIDE

•Two stage hydraulic system with fast feed and power stroke, With Safety valve, twist the active handle to release the pressure

YQK-70

• Single stage plunger pump, simple structure, reliable performance, interchangeable dies for different size

CY0-400C

FLIP TOP STYLE HEAD

• Two stage hydraulic system with fast feed and power stroke

YYQ-120A

YYQ-120

•Single stage plunger pump, simple structure, reliable performance, interchangeable dies for different size

YQK-300

•Single stage plunger pump, simple structure, reliable performance, interchangeable dies for different size

YQK-240

•Single stage plunger pump, simple structure, reliable performance, interchangeable dies for different size

KYQ-300

SAFETY SYSTEM INSIDE

• With safety valve inside

•With interchangeable dies for different size

•The tool clicks when the pressure reaches its limit

•The head can rotate 180°

KYQ-300C

SAFETY SYSTEM INSIDE

•With safety valve inside

•With interchangeable dies for different size

•The tool clicks when the pressure reaches its limit

•The head can rotate 180°

KYQ-400

•With safety valve inside

SAFETY SYSTEM INSIDE

With interchangeable dies for different size

•The tool clicks when the pressure reaches its limit

The head can rotate 180°

FHT-400U

•U Type of split crimping head, with interchangeable dies

•Suitable for transmission and distribution of indoor and outdoor projects

The tool work for different kind of connecting and building over head cable

FHT-300

U Type of split crimping head, with interchangeable dies

Suitable for transmission and distribution of indoor and outdoor projects

The tool work for different kind of connecting and building over head cable

Technical data

FHT-6OUNV

•Universal head with quick coupling,rotates 360°,flip top style For connecting to hydraulic drive units with 70 Mpa operating pressure for the best possible crimping,cutting and punching results

Technical data

SHP-430H

• Split crimping head with interchangeable dies

Suitable for transmission and distribution of indoor and outdoor projects

The tool work for different kind of connecting and building over head cable

SHP-510H

•Split crimping head with interchangeable dies

•Suitable for transmission and distribution of indoor and outdoor projects

The tool work for different kind of connecting and building over head cable

CO-630C

• C Type head, easy for operation.

• Interchangeable dies, both for series JL13 and 12Ton crimping dies.

•Alloy steel forged high strength head.

Remark: The allowable temperature above reference seals, tubing and factory used hydraulic oil temperature range, and should refer to allowable temperature of the hydraulic pump as well.

CO-25

• Light weight, easy for carry

• Wide crimping range from 16-630mm²

CO-45

• Light weight, easy for carry

• With interchangeable dies

●Wide crimping range from 120-1000mm2

With interchangeable dies

CO-400B

• Split crimping head with interchangeable dies

•Suitable for transmission and distribution of indoor and outdoor projects

•The tool work for different kind of connecting and building over head cable

Technical data

Technical data

Technical data

FYQ-630

Split crimping head with interchangeable dies

Suitable for transmission and distribution of indoor and outdoor projects

The tool work for different kind of connecting and building over head cable

FYQ-630A

Split crimping head with interchangeable dies

Suitable for transmission and distribution of indoor and outdoor projects

The tool work for different kind of connecting and building over head cable

FYQ-1000

•Split crimping head with interchangeable dies

Suitable for transmission and distribution of indoor and outdoor projects

Technical data

Technical data

The tool work for different kind of connecting and building over head cable

THE HANDLE CAN BE ELONGATED TO USE LOWEST ENERGY THE WHEEL QUENCHING TREATMENT

JT-150 With Telescopic Handles

•Manual crimping tool JT-150 is crimping lugs up to 150mm2

•The handle can be elongated to use lowest energy

• The crimping head is produced by precision casting processes

JT-300 With Telescopic Handles

• Manual crimping tool JT-300 is crimping lugs up to 300mm

• The handle can be elongated to use lowest energy

• The crimping head is produced by precision casting processes

JY-0650A

•Each tool with one set die but different in crimp size Rotate the die to choose crimping size

CT-38

•With one main crimping shape-indent

• Dieless crimping head,no dies to replace

CT-80

With one main crimping shape-indent

• Dieless crimping head,no dies to replace

CT-150

•With one main crimping shape-indent

•Dieless crimping head,no dies to replace

KH-150

• Dieless crimping head, no dies to replace.

• Each tool with one die but different crimping size.

• Adjust the top screw to choose size.

KH-230 With Telescopic Handles

• Dieless crimping head, no dies to replace.

• Each tool with one die but different crimping size.

• Adjust the top screw to choose size.

TM-120

• Dieless crimping head, no dies to replace.

•Each tool with one die but different crimping size.

• Adjust the top screw to choose size.

TM-150

• Dieless crimping head, no dies to replace.

• Each tool with one die but different crimping size.

• Adjust the top screw to choose size.

EXTRA WIDE APPLICATION RANGE FOR CUTTING DIFFERENT MATERIALS

ED-55

Battery Powered Cable Cutting Tool

5\~8s

PER CYCLE TIME

ED-55

Battery Powered Cable Cutting Tool (Closed head with bolt interlock)

The ED Series give another option for a fast and reliable way to cut operation. ZUPPER get the tool to cut different kind of cables, include armoured Cu/Al cable, ACSR, Cu/Al Cable, The tool comes standard with two 18V, 4.0Ah Li-ion batteries and one charger, motor drives, Micro-computer control system, OLED display and two stage hydraulic system with fast feed and power control.

Characteristics

OLED Data Display to show cutting time, Electricity Quantity, maintenance reminding and fault code.

•Air Cooling Heat dissipation System to extend using life.

• Cutting head rotates 350°

•Two stage hydraulic system with fast feed and power control

•Quick motor stop guarantees highest safety for the operator

• Automatic retraction when cut is completed

• Electronic control and monitor of Cutting operation

• Ergonomic design and optimized position of centre of gravity

Kit includes:

one cutting tool,two 4.0Ah Batteries, one charger and carrying case

EFFORTLESS CUTTING SIMPLY, QUICKLY AND SAFELY

ED-120C Battery Powered Cable Cutting Tool

5\~18s PER CYCLE TIME

ED-65C ED-85C ED-105C ED-120C Battery Powered Cable Cutting Tool (Opened head with bolt interlock)

The new addition ED-C series with C type of head give an option for a fast and reliable way to cut operation. ZUPPER get the tool to cut different kinds of cables, include armoured Cu/Al cable, Cu/Al Cable, the cutting head can rotate 350°, the tool comes standard with two Li-ion batteries and one charger, motor drives, Micro-computer control system, OLED Display and two stage hydraulic system with fast feed and power control. The tool can released automatically, manual retraction is allowed as well.

PERFECT CUTTING, ULTRA FAST Extra wide application range for cutting different materials

Characteristics

• OLED Data Display to show cutting time, Electricity Quantity, maintenance reminding and fault code.

•Air Cooling Heat dissipation System to extend using life.

• Crimping head rotates 350°

Two stage hydraulic system with fast feed and power control

•Quick motor stop guarantees highest safety for the operator

•Automatic retraction when crimp is completed

• Electronic control and monitor of crimping operation

• Ergonomic design and optimized position of centre of gravity

Kit includes:

One Cutting Tool and Two Batteries, One Charger and Carrying Case.

Cu/Al Cable

Light Weight Armoured Cable

Steel Bar

BLM-20

Battery Powered Cable Cutting Tool

For cutting ACSR, Steel rope, Armored cable, Rebar, Cu/Al cable, steel wire

BLM-10

Battery Powered Bolt Container Seal Cutter

Widely cut for container sealing lock or soft materials with diameter less than 10mm (e.g. Q235 steel bar, copper bar, aluminum bar)

Not suit for cutting Material of high strength and hardness, such as Hardened steel, bolts and so on.

SL-26C

Battery Powered Cable Cutting Tool Optimal carbide blade suit for cutting variety of hard materials

SL-40C Battery Powered Cable Cutting Tool Suit for cutting bigger Cu/Al cable

SL-20

Battery Powered Cable Cutting Tool

For cutting ACSR, Steel rope, Armored cable, Rebar, Cu/Al cable, steel wire

SL-10

Battery Powered Bolt Container Seal Cutter

Widely cut for container sealing lock or soft materials with diameter less than 10mm (e.g. Q235 steel bar, copper bar, aluminum bar)

Not suit for cutting Material of high strength and hardness, such as Hardened steel, bolts and so on.

PZ-26C

Battery Powered Cable Cutting Tool

•Optimal carbide blade suit for cutting variety of hard materials.

• OLED display show Working cycles, Maintenance note, Battery percentage,Fault code ect.

Automatic retraction when operation is complete, manual retraction if need.

•High performance 18V Li-ion battery, more than 180cuts per charge.

• Ergonomic and portable design, suit for one hand operation.

•Cutting head rotates 180°

•The general utilization and standardization production for core parts makes quality more guaranteed

Steel bar≤φ10mm

ACSR≤φ26mm

Steel strand≤φ11mm

Cu/Al cable≤φ26mm

Armoured cable≤φ26mm

Wirerope≤φ14mm

PZ-40C

Battery Powered Cable Cutting Tool

The ZUPPER PZ series with small size and low weight can generate high power and performance, it is the newest addition to the mini cutting tool with in-line grip, 4-9s cut cycle time. Our compact "mini" is just perfect for confined areas.

Effortlessly cut up to MAX. DIA. 40mm Cu/Al Cable

CIRCUIT BOARD DIAGNOSTICS

Alart you when the battery is low or the tool is too hot or cold

OLED DISPLAY

• Easy reading on

• Battery Percentage

• Cutting Times

• Fault Code

• Maintenance Note

180° SWIVELLING BARREL

Easy access to connections

TWO STAGE HYDRAULIC SYSTEM

Hydraulic Ram Output provides more force for reliable connection

ERGONOMIC DESIGN

With light weight and in-line grip, easily work overhead and in tight spaces.

All tools can be controlled by one trigger
Manual retractioin to return the piston in case of an incorrect cut

Single core Cu cable

Single core Al cable

ACSR
Cu/Al cable

High performance 18V Li-ion Battery
OLED display (Cutting time, Electricity QTY, Maintenance reminding and fault code)

PZ-35C Battery Powered Cable Cutting Tool

For cutting Cu/Al cable and ACSR COMPACT MEASURES HUGE POWER

PZ-32C/32CX Battery Powered Cable Cutting Tool

For cutting Cu/Al Cable up to 32mm dia.
For cutting fine and superfine stranded Cu/Al cables up to 32mm dia.

Technical data PZ-32C			PZ-32CX
Rated pressure:		20kN	20kN
Stroke:		29mm	29mm
Cuttingrange:	Single core Cu cable	≤φ23mm	≤φ23mm
	Four core Cu Cable	≤φ23mm	≤φ23mm
	Single core Al cable	≤φ25mm	≤φ25mm
	Single core armoured Cu cable	≤φ32mm	≤φ32mm
	Thin Cu cable		≤φ32mm
Oil capacity:		60ml
Voltage/capacity:		18V/2.0Ah
Charging time:		40 mins
Charging voltage:		AC 100V~240V;50~60Hz
Package:		Plastic box
Weight(with battery):		3.1kgs	3.1kgs
Size:		438x164x75mm
Accessories
Battery:		2pcs
Charger:		1pc
Sealing ring of cylinder:		1set
Sealing ring of safety valve		1set
Single core Cu cable Single core Al cable ACSR Cu/Al cable

PZ-10

Battery Powered Bolt Container Seal Cutter

widely cut for container sealing lock or soft materials with diameter less than 10mm (e.g. Q235 steel bar, copper bar, aluminum bar)

· replaceable cutting head, one-hand easy operation

· Special toothed tool head, Not easy to break off or fly out after cut, safety operation · Narrow design on the head is just perfect for the container confined areas.

· Not suit for cutting Material of high strength and hardness, such as Hardened steel, bolts and so on.

PZ-20

Battery Powered Cable Cutting Tool

For cutting ACSR, Steel rope, Armored cable, Rebar, Cu/Al cable, steel wire High-performance cutting characteristics for highly-flexible conductors and wire cables SMALL MEASUREMENT, HUGE POWER

NEW TECHNOLOGY OF EB SERIES BRUSHLESS MOTOR No carbon brush, durability and reliability

5\~18s

PER CYCLE TIME

1. Download the ZUPPER Link APP from Apple Store or Google Play 2. Open the APP and sign in using your credentials or create a new account 3. Follow on-screen instructions to register your tool

EB-105

Battery powered brushless hydraulic cutting tool

To be standard constitutor in hydraulic tool field, ZUPPER develop the new technology of brushless motor no carbon brush, maintenance-free and motor overload protection. 30% Longer motor life and the brushless motor will do more work in the same full charge of the battery pack, 30% more run-time than the brush motor. Micro computer control system with the feature of self-pressure inspecting, with high-performance 18V battery, 110 Cuts per charge, This tool combines powerful output with an ergonomic design, it delivers reliability and efficiency on every job.

No carbon brush, Durability and reliability

•5-18S to finish one cycle

Automatic retraction when press is completed

•Two stage hydraulic system

An ergonomic design and optimized position of center of gravity to provide increased feel and usability

Micro computer control system

BLUETOOTH AND PRESSURE SENSOR

Thanks to new implemented Bluetooth technology, devicerelated data can be requested via the ZUPPER APP.The ZUPPER EB Series include BLUETOOTH as basic configuration,you can choose pressure sensor at optional.

ZUPPER Check-APP

Data transfer between cutting tool and APP

See the location of where your ZUPPER Link enabled tool was last seen.

• Check the pressure by pressure sensor to differentiate the pressure normal or not.

•APP shows the pressure data counter to check and analyze the pressure easily.

Cu/Al Cable

ACSR
Armoured Cable

Steel bar

FOR MULTIPLE CUTS, RSWHIGH EFFICIENCY RETRACTION STOP

5\~18s PER CYCLE TIME

BZ-120C

Battery powered Cable cutting tool

BZ-45 BZ-85 BZ-105 Battery Powered Cutting Tool

BZ series cutting tool get with the system of RETRACTION STOP-RSW function, the tool can continue multiple operate with high efficiency.

Cu/Al Cable

ACSR

Armoured Cable
Steel bar

MC-55

Battery Powered Mechanical Cutting Tool

• Compact design with light weight and portability, suitable for all on-site operations

• 6-stage adjustable blade retraction stroke setting: Select the appropriate blade

• retraction gear according to the cable diameter

• During cutting or in case of an error, the button can be released at any time and the blade retracts automatically, improving work efficiency

• High-brightness LED work light, enabling operation in dim work areas

• A fully charged 4.0Ah battery enables approximately 120 cuts of 4x150 armored copper cable

52OW HIGH POWER 220V lasting power supply, Reliable and Stable

HH-105 Electric Powered Cable Cutting Tool

220V lasting power supply Efficiency

HH-45 HH-85 HH-105 Electric Powered Cable Cutting Tool

HH series are full consideration for the cost performance of users, the tool comes standard with 220V input voltage directly, 520W rated power, two stage hydraulic system, save the cost of the batteries with AC series motor, it is perfect experience at a reasonable cost.

• Cutting head rotates 350°

• D type of cutting head, armoured cable has better applicability

•Two stage hydraulic system, AC series motor with high efficiency

•OLED Data Display show cutting time, maintenance reminding and fault code

HZ-85 Manual Hydraulic Cable Cutting Tool Easy To Operate, Safety and Reliability

HZ-45

• Flip top cutting head rotates 350°.

• Two stage hydraulic to reduce cutting cycle,

automatically release pressure when cut is completed.

•Manual release in case of if needed.

HZ-55

• suit for cutting ACSR, Armored cable, Cu/Al cable, Steel strand and so on.Two stage hydraulic system with fast feed and power stroke

HZ-85

•Flip top cutting head rotates 350°.

• Two stage hydraulic to reduce cutting cycle,

automatically release pressure when cut is completed.

• Manual release in case of if needed.

Technical data

Technical data

HZ-65C/85C/105C

• Simple and convenient- Opening C type cutting head

•Double hydraulic stages alternately ensure the piston move fast.

• Guide pad design avoid the blade dislocation during cutting procession.

CPC-40BL

• Flip-top cutting head, easy for operation, more convenient

• The blade guide block design effectively prevents blade dislocation during cutting procession

THC-20

• Rotate head 180°

• Flip top cutting head

• Easy changeable cutting blade

• Single hydraulic plug make the function stable

Technical data

CPC-85B

• Flip top cutting head, easy for operation, more convenient

• The blade guide block design effectively prevents blade dislocation during cutting procession can be matched with any pump

•Opening C type cutting head.

CPC-65C/85C/105C/120C

• Hydraulic quick coupler connect with the pump for working.

•Guide pad design to avoid the blade dislocation during cutting procession.

CPC-100B

• Suggest to match with CP-390, CP-700

CPC-105B

• Suggest to match with CP-390, CP-700

TC-38

• Strong, light weight glass fiber handle

• Adjustable pivot bolt realized adjustable blade

• Changeable, forging blade heat treated and precise polish

TC-125S/250S

• Only cut Cu/Al Cable with telescopic handle

TCR-500S

• Using ratchet drive device with telescopic handle, only for cut Cu/Al cable

ZC-36A/ZC-60A

• Forged blade, long span life, easy for cutting Only for cutting Cu/Al cable, forbid cut steel wire, hardened copper wire

ZC-32A/ZC-52A

• Forged blade, long span life, easy for cutting Only for cutting Cu/Al cable, forbid cut steel wire, hardened copper wire

ZC-70A

ZC-95A

The knives are made by forging, long life span and easy to cut.

ZC-120A

• The knives are made by forging, long life span and easy to cut.

ZC-G40

• With Telescopic Handles

ZC-G32A

• With Telescopic Handles

COMPACT DESIGN,180° x 360 SWIVELLING HEAD EFFORTLESS PUNCH WITH 6TON OUTPUT

BLM-6AL

Battery Powered Punching Tool

Aluminum alloy body with light weight 180°x360° swivelling head Ergonomic design with high quality aviation aluminum

ED-12

Battery powered punching tool

The new addition ED Series give another option for a fast and and reliable way to punching operation. The tool comes standard with two 18V,4.0Ah Li-ion batteries and one charger, motor drives, Micro-computer control system, OLED display and double valve hydraulic system.

Technical data

Accessories:

BZ-12 Battery Powered Punching Tool

Accessories:

Standard round knockout punches (Type B)

Capacity: Mild steel up through 3.5mm (10gauge) Application: Punch mild steel, aluminium, fiberglass and plastic. Operation: Battery, hydraulic, ratchet or manual drivers. When used with ratchet, hydraulic or battery drivers, buy the punch and die only; the draw stud is part of the driver kit.

Round knockout punches (Type C)

Capacity: Mild steel up through 3.5mm (10 gauge) Application: Punch mild steel, aluminum,fiberglass and plastic. Operation: Battery, hydraulic, ratchet or manual drivers. When used with ratchet, hydraulic or battery drivers, buy the punch and die only; the draw stud is part of the driver kit.

Round knockout punches (Type E)

the new SPEED PUNCH System

SAVE TIME AND SAVE MONEY WITH EVERY PUNCH

SPEED LOCK mechanism quickly secure the entire system in place, punch more holes in less time.

"No-thread" punch design quickly and easily slides on/off draw stud

The punch and die are precisely matched with the draw stud

3X quicker punching with the Speed Punch System

After opening, the surface of the hole is smooth and clean, without obvious burr

PATENT NO: CN209773209U

Every cut quick and clean Slug falls free in die

Just tip it out

Punch design creases slug as the punch is drawn into the die.

slug is split in half as punching operation is completed.

split slugs fall free from the die and stud.

Standard round knockout punches (Type D)

Capacity: Mild steel up through 3.5mm (10gauge)

Application: Punch mild steel, aluminium, fiberglass and plastic.

Operation: Battery, hydraulic, ratchet or manual drivers. When used with ratchet,hydraulic or battery drivers, buy the punch and die only; the draw stud is part of the driver kit.

ROUND PUNCHES

SQUARE PUNCHES

RECTANGULAR PUNCHES

WK-9AL HYDRAULIC PUNCH DRIVER with new SPEED PUNCH System

"No Thread" Punch design, effortless punching with quickest speed and most efficiency

• with high strength aluminum alloy body, easy to handle

• compact body, huge power-two stage hydraulic system to deliver fast feed and power stroke

360° rotatable working head, widely used in different applications. the working head inlay the spacer to protect the aluminum head

Note: Due to the different material and process of the iron plate, it is impossible to define the accurate hole diameter and plate thickness. The actual test data shall prevail.

TPA-8

• 360° rotatable head

• with high strength aluminum alloy body, easy to handle

WK-8

• For easy operation and comfort the operator, the tool head can be fully rotated through 360°

•lt gives clean perforation through 3.5mm thick mild steel with a φ61.5mm max hole.

Technical data

WK-8AL

• 180°\*360° rotatable head, right angle driver head for maximum flexibility in confined working

areas with high strength aluminum alloy body, easy to handle

• Allow unlimited driver orientation to simplify access to work area.

• Develops 7tons of hydraulic force for easy punching