JHY10L/R

产品材质：304不锈钢
表面处理：本色
最大承重：120Kg/对，安全系数n=1.5 适用范围：欧标20槽外平开窗，分左右
Material: Stainless steel 304
Surface treatment: Natural
Maximumloadbearing:120Kg/pair,safety factor n=1.5
Scope of application: European standard 20- slot outswing
Casement windows, divided into leftward and rightward ones

JHY41A-L/R

产品材质：304不锈钢
表面处理：本色
最大承重：80Kg/对，安全系数n=1.5 适用范围：欧标20槽外平开窗，分左右
Material:Stainlessteel304
Surface treatment:Natural
Maximumloadbearing80kg/pair,safetyfactorn=1.5
Scope ofapplication:Europeanstandard20-slot outswing
Casement windows, divided into leftwerd and rightward ones 产品材质：304不锈钢
表面处理：本色
最大承重：80Kg/对，安全系数n=1.5 适用范围：欧标20槽外平开窗，分左右
Material: Stainless steel 304
Surface treatment: Natural
Maximumloadbearing80Kg/pair，safetyfactorn=1.5
Scope of application: European standard 20-slot outswing
Casement windows, divided into lefbward and rightward ones

JHY41C-L/R

JHY47L/R

产品材质：304不锈钢
表面处理：本色
最大承重：120Kg/对，安全系数n=1.5 适用范围：欧标20槽外平开窗，分左右
Material: Stainless steel304
Surface treatment:Natural
Maximumload bearing:120kg/pair,safetyfactorn=1.5
Scope ofapplication:European standand 20-slotoutswing
casemen twindows, civiced into leftward and rightwverd ones 产品材质：304不锈钢
表面处理：本色
最大承重：150Kg/对，安全系数n=1.5 适用范围：特殊槽口外平开窗，分左右
Material: Stainless steel304
Surface treatment:Natural
Maximumload bearing:15okg/pair,safetyfactorn=1.5
Scope ofapplication: Special slot outsideflat open win
dow, divided into leftward and rightwverd ones

Scopeofapplication:Europeanstandard20-slotoutswing casemen twindows, divided into leftwerd and rightwward ones

JHY51L/R

Stay Series 撑挡

撑挡

JG/T128-2017

定义：限制活动扇开启角度的装置，又称限位器、开启限位器。

性能指标：

1.锁定式撑挡的锁定力不应小于200N；摩擦式撑挡摩擦力不应小于40N。
2.锁定式撑挡反复启闭1万次后，各部件不应损坏，且锁定力不应小于200N；摩擦式撑挡反复启闭1.5万次后，且摩擦力不应小于40N。
3.内平开窗用撑挡在承受350N作用力后，撑挡不应脱落。外开上悬窗用撑挡在开启方向承受1000N作用力后，在关闭方向承受600N力作用后，且撑挡所有部件不应损坏。

使用范围：内平开窗、上悬窗。

Stay Series JG/T128-2017

Definition:

Adevice thatlimits the openingangleofamoving fan,also called limiterand opening limiter.

Performanceindex:

1.Thelockingforceofthelockingbraceshouldnotbelessthan2ooN;thfrictionalforceofthefriction-typebraceshouldnotbe lessthan 40N.
2.Afterrepeatedlyopeningandclosingofthelockingbaceforotimesallomponentsshallnotbedamagedandthe lockingforcesallnotsstanNftr15tousandtimesofrepeatedyopeingadloingoftrcio-teth frictionalforceshould notbe lessthan40N.
3.Thebraceusedforinswingingcasementwindowshallnotfalloffafteritisbearingtheforceof35oNAfter10ooNforceis appliedintheopeningdirectionofbraceusedforopeningupperhangingwindowand6oONforceisappliedintheclosing direction,allparts ofthe braceshallnotbe damaged.

撑挡系列STAYSERIES

JD005

JFZ05L/R

JFZ06L/R

Transmission DeviceSeries传动锁闭器

传动锁闭器 JG/T126-2017

定义：限制门窗扇锁闭和开启的杆形、带锁点的传动装置。

主要性能指标：

1.无锁舌的齿轮驱动式传动锁闭器空载转动力矩不应大于3N·m；由执手驱动锁舌的传动锁闭器驱动部件操作力矩不应大于3N·m，由钥匙驱动锁舌的传动锁闭器驱动部件操作力矩不应大于1.2N·m；
2.无锁舌齿轮驱动式传动锁闭器承受25N·m力矩的作用后，各零部件不应断裂、损坏；有锁舌齿轮传动锁闭器：碰舌驱动部件承受60N·m或25N·m扭矩后，呆舌驱动部件承受30N·m或20N·m扭矩后，传动锁闭器应使用功能正常，且操作力仍应满足规定的要求；
3.反复启闭20万次，代号为1；反复启闭2.5万次，代号为I；按反复启闭使用频率启闭循环后，各构件应无扭曲、无变形、不影响正常使用
适用范围：平开门窗、推拉门。

TransmissionDevice JG/T126-2017

Definition:

Arod-shapedtransmissiondevicethatlimitsthelockingandopeningofdoorandwindowfanwithlockpoint.

Performance index:

1.The no-loadrotationaltorquefornobolt gear-driventransmissonlockshouldnotexceedthan3Nm;theoperating torqueforthetransmissionlockdrivenpartswithboltdrivenbyhandshallnotexceedthan3N·m,theoperatingtorquefor the transmission lock driven partswith boltdriven bykey shall not exceed than 1 . 2 N * { m } ;

2.Aftertheno-botgeardriventransmissionlockissubjectedtoatorqueof25Nm,allpartsandcomponentsshallnotbe brokenordamaged;Thetransmissonlockwithbolt:Whenthetouchingdrivecomponentoftheboltissubjectedto60N·m or25N·mtorque,andthedumbdrivecomponentoftheboltissubjectedto30N·mor2ON·mtorquethetransmissionlock shall be normally used and the operating force shallstillmeet the specified requirements.

3.Repeatedlyopenandclose2ootimes,code-named;repeatedlyopenandclose25ootimes,odemedIl; aftertheopeningandclosingcyclesbasedonrepeatedlyopeningandclosing frequencythecomponentsshallbeno distortion,nodeformationand notaffect the normal use.

Scope of application:

flat opening doorsand windows,sliding doors.

传动锁闭器系列MULTI-POINTTRANSMISSIONDEVICESERIES

JCH02

JCH03

双向Bi-directional drive

JCH30-11

双向Bi-directional drive <br>双向Bi-directional drive

传动锁闭器系列MULTI-POINTTRANSMISSIONDEVICESERIES

双向Bi-directional drive

JCH30-13

双向Bi-directional drive

JCH30-15

双向Bi-directional drive

JCH30-20

双向Bi-directional drive

JCH30-25

传动锁闭器系列MULTI-POINTTRANSMISSIONDEVICESERIES

JCH30-27.5

双向Bi-directional drive

JCH30-30

双向Bi-directional drive

JCH03-35

单向Unidirectional

JCH15

传动锁闭器系列MULTI-POINTTRANSMISSIONDEVICESERIES

单向 Unidirectional

JCH32-11.5

单向Unidirectional

JCH32-25

单向Unidirectional

JCH32-30

传动锁闭器系列MULTI-POINTTRANSMISSIONDEVICESERIES

JCH35-10

双向Bi-directional drive

闭窗器 WINDOWCLOSER

JBCH10L/R闭窗器 JBCH10L/RWindowCloser

JBCH10A-L/R闭窗器 JBCH10A-L/RWindowCloser

JBCH10B-L/R闭窗器 JBCH10B-L/RWindowCloser

CasementDoorLockAccessories 平开门锁配件

双面执手系列DOUBLESIDESHANDLESERIES

T

JCZM01

1.表面处理：氧化
2.双面带锁，锁芯孔距92mm；
3.配8\*8方轴，方轴长度=L（型材厚）+43mm；
4.配M5螺丝=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 92mm.
3.88 square shaft,shaft length= L(thickness ofprofile)+43mm.
4.Configure M5 screw=L+15mm

JCZM03

1.表面处理：氧化
2.双面带锁，锁芯孔距92mm；
3.配8\*8方轴，方轴长度=L（型材厚）+34mm；
4.配M5螺丝=L+12mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 92mm.
3.88 square shaft, shaft length= L(thickness of profile) +34mm.
4. Configure M5 screw= L+12mm.

JCZM08

1.表面处理：氧化
2.双面带锁，锁芯孔距92mm；
3.配8\*8方轴，方轴长度=L（型材厚）+45\~50mm；
4.配M5螺丝=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side, cylinder pitch 92mm.
3.88 square shaft,shaft length= L(thickness ofprofile)+45-50mm.
4.Configure M5 screw= L+15mm.

JCZM09

1.表面处理：氧化
2.双面带锁，锁芯孔距92mm；
3.配8\*8方轴，方轴长度=L（型材厚）+45\~50mm；
4.配M5螺丝=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 92mm
3.88 square shaft,shaft length= L(thickness of profile) +45-50mm.
4.Configure M5 screw= L+15mm.

JCZM10

1.表面处理：氧化
2.双面带锁，锁芯孔距92mm；
3.配8\*8方轴，方轴长度=L（型材厚）+39mm；
4.配M5螺丝=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side, cylinder pitch 92mm.
3.88 square shaft, shaft length= L(thickness of profile) + 39mm.
4. Configure M5 screw= L+15mm.

JCZM11

1.表面处理：氧化
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+45mm；
4.配M5螺丝=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm.
3.88square saft,shaftlength=Ltickness ofprofile)+45mm.
4.Configure M5 screw= L+15mm.

JCZM12

1.表面处理：氧化
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+34mm；
4.配M5螺丝=L+12mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm.
3.88 square shaft,shaft length=L(thickness ofprofile)+34mm.
4.Configure M5 screw= L+12mm.

干

JCZM12D

1.表面处理：粉末喷涂
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+（42-45）mm
4.配M5螺丝=L+12mm。
1.Surface treatmentPowder coating
2. Lock on each side,cylinder pitch 85mm.
3.88 square shaft, shaft length= L(thickness ofprofile) +<42-45)mm
4.Configure M5 screw= L+12mm.

JCZM13

1.表面处理：氧化
2.双面带锁，锁芯孔距92mm；
3.配8\*8方轴，方轴长度=L（型材厚）+45\~50mm；
4.配M5螺丝=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 92mm.
3.88 square shaft,shaft length=L(thickness ofprofile)+45-50mm.
4.Configure M5 screw= L+15mm.

JCZM23

双面执手系列DOUBLESIDESHANDLESERIES

JCZM25A

1.表面处理：粉末喷涂
2.双面带锁，锁芯孔距72mm；
3.配8\*8方轴，方轴长度=L（型材厚）+60mm；
4.配M5沉机=L+12mm。
1.Surface treatment:Powdercoating
2.Lock oneach sidecylinder pitch 92mm.
3.88 square shaft,shaft length= L(thickness of profile)+60mm.
4.Equipped with M5 sinker=L+12mm

JCZM28

1.表面处理：氧化
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+（24-27）mm；
4.配M5螺丝=L+（8-17）mm。
1.Surface treatment:Anodised
2. Lock on each side,cylinder pitch 85mm.
3.88squaresha,satlegth=Lticknessofprofie)+(24-27)mm.
4.Configure M5 screw= L+(8-17)mm.

JCZM29

1.表面处理：氧化
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+（15-18）mm；
4.配M5螺丝=L+（8-16）mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm
3.88 square shaft, shaft length=L(thickness ofprofile) +(15-18)mm.
4.Configure M5 screw= L+(8-16)mm.

JCZM30

1.表面处理：氧化
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+（18-20）mm；
4.配M5螺丝=L+（8-17）mmmm。
1.Surface treatment Anodised
2.Lock on each side,cylinder pitch 85mm
3.88square shaft,shaft length=L(thickness of profile)+（18-20）mm.
4. Configure M5 screw= L+(8-17)mm.

JCZM31

1.表面处理：氧化
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+（25-32）mm；
4.配M5螺丝=L+（8-17)mm。
1.Surface treatmentAnodised
2.Lock oneach side,cylinder pitch 85mm.
3.88 square shaft,shaft length=L(thickness of profile) +（25-32）mmmm.
4. Configure M5 screw= L+ (8-17)mm mm.

JCZM32

1.表面处理：氧化
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+（24-26）mm；
4.配M5螺丝=L+（8-17）mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm.
3.88square shaft,shaftlength=L(thickness ofprofile)+（24-26）mm.
4.Configure M5 screw= L+(8-17)mm.

双面执手系列DOUBLESIDESHANDLESERIES

JCZM33

1.表面处理：氧化
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+（26-33）mm；
4.配M5螺丝=L+（8-17）mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm.
3.88square shaft,shaft length= L(thickness ofprofile)+（26-33)mm.
4.Configure M5 screw= L+（8-17)mm.

JCZM36

1.表面处理：粉末喷涂
2.双面带锁，锁芯孔距85mm；
3.配8\*8方轴，方轴长度=L（型材厚）+80
4.配M5螺丝=L+12mm。
1.Surface treatment:Powder coating
2.Lock on each side cylinder pitch 85mm.
3.88 square shaft,shaft length= L(thickness ofprofile) + 80
4. Configure M5 screw= L+12mm.

JCZM39

1.双面带锁，锁芯孔距85mm；
2.配8\*8方轴，方轴长度=L（型材厚）+40mm；
3.配M5螺丝=L+16mm；
4.表面处理：粉末喷涂。
1.Double-sidedlocking，lockcylindercenter-to-centerdistance:85mm;
2.Fittedwith8X8squareshaft,saftlength=L(profilethicknes)+40mm;
3.Equipped with M5 screws=L+16mm overall length;
4.Surface treatment:Powdercoating。

锁体 LOCKBODY

JST92系列

JST92B系列

JST4085B系列

锁体 LOCKBODY

JST85B系列

JST3000锁体

回 H 。 . . 0 日 22 M 4 @ 45 7038 . 9 H 3 T B □ G T 4 A 山 99
(s · 8 H 降 。 2.5 T H 品 2 1 34 29 49.5 44.5
0 产品名称：锁体T3485B JST2985B
C 00 产品材质：304不锈钢面板+冷轧板
S 产品规格：JST3485B、JST2985B 表面处理：本色+镀锌 适用范围：平开门 Product name: Lock body Material: Stainless steel 304 plate, cold+rolled sheet Szie:JST3485B、JST2985B Surface treatment: Natural color+ zinc plating Scope of application: Casement door

Surface treatment: Naturalcolor+zincplating Scope of application: Casement door

JST3000B锁体

锁体 LOCKBODY

JSTH01多点锁体

JSTH01A多点锁体

JCZMK01

CZMK23

CZMK35

JH30348-5

插销系列FIUSHBOLTSERIES

JMX01

产品名称：插销
表面处理：珍珠镍、黑、镀镍
适用范围：平开门、平开窗
Product name: Flush bolt
Surface treatment:Peerl nickel, black, nickeling
Scope of application: Casementwindow& door
产品材质：插销
表面处理：喷涂
适用范围：适用于平槽口的平开门窗

Material: Flush Bolt Surface treatment: PowderCoating Scope of application:Suitable forcasementopening doors and windows with flat grooves

COLOR颜色 色 光 金色 PVD 古铜 色

产品材质：插销
表面处理：喷涂
适用范围：适用于平槽口的平开门窗

Material: Flush Bolt Surfacetreatment:PowderCoating Scope ofapplication:Suitable forcasement opening doors and windows with flat grooves

产品特点：

\*简约时尚，极窄设计风格，超窄边框；
\*开阔空间视野，多一份空间与宁静轻松；
\*产品升级功能，防撞及自动开锁专利设计；
\*节省空间、开启面积大，运转灵活；
\*安装简便，高超承重滑轮；

product feature:

\*modernstylish,Extremelynarrowdesignstyle,Ultranarrowprofile; \*Open space vision,more space and quietrelaxed \*Productupgradefunctionanti-collsionandautomaticlockpatentdesign; \*Spacesaving,largeopeningarea,flexibleoperation \*Easyto install,ultra highload bearing pulley

配置说明：

1.图中配件的数量为单扇门配置；
2.拉手、滑轮有多种选择可根据型材实配。
3.适用于室内隔断门、阳台门、厨房门等不同场所；

Configuration instructions:

1.The quantity of accessories in thefigure is forone sash doorconfiguration;
2.Variety option for handlesand rollers according to different profile system.
3.Suitableforindoorpartition,balcony,kitchenandotherdifferentplaces;

窄边推拉门五金配置表(三轨联动) NARROW DESIGNSLIDING DOOR HARDWARECONFIGURATION(THREE LINKAGE)

产品特点：

\*简约时尚；极窄设计风格，超窄边框；
\*直角升级功能，四边均极致窄边，并以斜面过渡；
\*产品升级功能，防撞及自动开锁专利设计；
连动开启，操作灵活便捷，开启面积大又节省空间；
\*安装简便，高超承重滑轮；

product feature:

"Simple and stylish: extremely narrow design style,ultra-narrowframe;
\*Right-angleupgradefunction,allfoursidesareextremelynarrowdesign,andtakesthe inclined asa transition;
\*Productupgradefunction,anti-colisionand automaticunlockingpatentdesign;
Linkageopening,flexibleandconvenientoperation,largeopeningarea andspacesaving;
\*Easyinstallation,superload-bearingroller;

配置说明：

1.图中配件的数量为三扇门配置；
2.拉手、滑轮有多种选择可根据型材实配。
3.适用于室内隔断门、阳台门、厨房门等不同场所；

Configuration instructions:

1.The numberof accessoriesin the picture isa three-doorconfiguration; 2.There are manyoptions for handles and rollers,whichcan be matched according to the profile. 3.Suitable forindoor partition doors, balcony doors,kitchen doors and other places;

窄边推拉门五金配件 NARROWFRAMESLIDINGDOORHARDWAREACCESSORIES

JZTM201-01A-L/R

Product name: lock seet Surface treatment: Oxidation/spraying

窄边推拉门五金配件 NARROWFRAMESLIDINGDOORHARDWAREACCESSORIES

JZTM202-01B推拉门五金系统特性：

推拉门隐藏式缓冲五金 SLIDINGDOORHIDDENBUFFERHARDWARE

1、能有效减缓门扇关闭时的撞击，并具自动回位的功能。
2、推拉门系统具有节省空间、开启面积大，运转灵活；单扇最大承重150kg。
3、本配置适用于带入户的阳台推拉门中，拉手有多种选择，可根据型材实配。
4采用条锁启闭，操作方便更具人性化。
5、实现了多点锁闭，安全性更高。

Slidingdoorhardwaresystem features:

1.Thissystemhasself-returncapacitycanefectivelyreducethehitwhenthedoorisclosing.
2.Saves the space and operates flexiblymaximum load bearing ofeashsashis150kg.
3.Suitable for sliding door in balcony,multi choices for pull handle.
4.Uses sliding lock for opening andclosing.
5. Better security with multi point locks.

推拉门五金系统特性：

1、优美线条及人体工学舒适手感的外形执手；
2、具B级防盗功能的锁闭系统、可调节锁点设计；
3、高承重不锈钢轨设计，具有大开启面积和灵活的开启；
4、滑轮最大承重：250Kg/组；

HARDWARESYSTEMCONFIGURATIONSCHEME

Slidingdoorhardwaresystem features:

1.Handle with elegant steamline and ergonomic tactile impression
2.Handle withelegant steamlineand ergonomictactile impression
3.Highload-bearing stainlesssteelrail,whichhaslarge openingareaandflexibleopening function
4.Maximum load of roller:25okG/pair

条锁 SLIDINGLOCK

JSTG03A

JSTG04A

Code:JSTG05 Surface treatment: Anodization

Productname:Single SlidingLockCode:JSTG05ASurface treatment: Anodizztion扣手系列BUTTONSERIES

JSTG19A

产品名称：单面扣手
产品编号：JSTG19A
表面处理：氧化
Product name: Single sided buckle
Code:JISTG19A
Surface treatment: Anodization 产品名称：反面扣手
产品编号：JSTG18B
表面处理：氧化
Product name: Reverse buckle Code:JSTG18B
Surface treatment: Anodization

JML01

产品名称：拉手 表面处理：氧化 Product name:Sliding doorhandle Surface treatment:Anodization

RollerSeries滑轮系列