该页无缩略图
Spec Review No.:SR2502048A Date: Feb. 24, 2025
Unit
nm
nm
-
-
-
%
dB
dB
W
mm
°C
°C
*Above specifications are for device without connector.
*Port mark with digital labeling
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMMPC-LC-(6+1)X1-①-②②②②-③③③-④④-⑤⑤-⑥⑥-⑦-⑧
①:Pump Propagation Direction ④④:Pump Fiber Type ⑦:Fiber Length
F- Forward 02- MM-S105/125-22A 1- 1m
S - Specify SS - Specify S - Specify
②②②:Pump Wavelength ⑤⑤:Signal Input Fiber ⑧:Package Type
915- 915nm, 950- 950nm 52- NUFERN PM-GDF-1550 P2- 70x12x8
SSS - Specify SS - Specify S - Specify
③③③③:Signal Wavelength ⑥⑥:Signal Output Fiber
1550- 1550nm 52- NUFERN PM-GDF-1550
SS - Specify SS - Specify
Operating Temperature
Storage Temperature -40 to 85
70X12X8
-5 to 75
Package
30
93
Max.Signal Insertion Loss (Input to Output) 1.5
Min.PER (Inner Core) @23°C 18
Max.Pump Power Handling (Per Port)
Signal Output Fiber NUFERN PM-GDF-1550
Min.Pump Efficiency
Signal Wavelength 1550
Pump Fiber MM-S105/125-22A
Signal Input Fiber NUFERN PM-GDF-1550
Pump Wavelength 950
Polarization Maintaining (6+1)X1 MultiMode Pump & Signal Combiner 15xxnm 30W
Specifications
Parameters Values
Form No.: D05-203-05 Rev.B
99
Spec Review No.: SR2408017A Date: Aug. 08, 2024
Unit
nm
nm
-
-
-
%
dB
dB
W
℃
℃
mm
*Above specifications are for device without connector.
*Port mark with digital labeling
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMMPC-LC-(1+1)X1-①-②②②-③③③③-④④-⑤⑤⑤-⑥⑥⑥-⑦-⑧
①: Pump Propagation Direction ④④: Pump Fiber Type ⑦: Fiber Length
F - Forward 02 - NUFERN MM-S105/125-22A 1 - 1.0m
S - Specify
②②②: Pump Wavelength ⑤⑤⑤: Signal Fiber Type
793 - 793nm 156 - PM1950 ⑧: Package Type
P2 - 70x12x8
③③③③: Signal Wavelength ⑥⑥⑥: Output Fiber Type
1950 - 1950nm 157 - PM-GDF-10/130-2000-M
Min. Extinction Ratio 18
Max. Signal Insertion Loss (Input to Output) 0.5
Polarization Maintaining (1+1)X1 Multimode Pump & Signal Combiner
19xx~20xxnm 10W
Specifications
Parameters Values
Operating Temperature
Pump Wavelength 793
Signal Wavelength 1950
Pump Fiber NUFERN MM-S105/125-22A
-5 to +75
10
92
Storage Temperature
Max. Pump Power Handling (Per Pump)
Signal Input Fiber PM1950
70X12X8
Output Fiber PM-GDF-10/130-2000-M
Min. Pump Efficiency
-40 to +85
Package
Form No.: D05-203-05 Rev.B
100
Spec Review No.:SR2405011A Date: May. 09, 2024
Unit
nm
nm
-
-
-
%
dB
dB
-
W
℃
℃
mm
*Above specifications are for device without connector.
*Port mark with digital labeling
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMMPC-LC-(2+1)X1-①-②②②-③③③③-④④-⑤⑤⑤-⑥⑥⑥-⑦-⑧
①: Pump Propagation Direction ④④: Pump Fiber Type ⑦: Fiber Length
F- Forward 02- MM-S105/125-22A 1- 1.0m
S - Specify
②②②: Pump Wavelength ⑤⑤⑤: Signal Fiber Type
793- 793nm 157- PM-GDF-10/130-2000-M ⑧: Package Type
P2 - 70(L) x12(W) x8(H)
③③③③: Signal Wavelength ⑥⑥⑥: Output Fiber Type
2050- 2050nm 157- PM-GDF-10/130-2000-M
Pump Wavelength 793
Specifications
Parameters Values
Signal Wavelength 2050 (Test at 1985)
Pump Fiber MM-S105/125-22A
Signal Input Fiber
Min. Extinction Ratio 17
PM-GDF-10/130-2000-M
Storage Temperature -40 to 85
70(L) x12(W) x8(H)
Output Fiber PM-GDF-10/130-2000-M
Min. Pump Efficiency
Max. Signal Power Handling AVG: 5W; Peak: 500W
Polarization Maintaining (2+1)X1 Multimode Pump & Signal Combiner
19xx~20xxnm 30W
-5 to 75
30
92
Max. Signal Insertion Loss (Input to Output) 0.5
Max. Pump Power Handling (Per Port)
Package
Operating Temperature
8
Form No.: D05-203-05 Rev.B
101
Spec Review No.:SR2305051A Date: May. 15, 2023
Unit
nm
nm
-
-
-
%
dB
dB
W
°C
°C
mm
*Above specifications are for device without connector.
*Port mark with digital labeling
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMMPC-LC-(6+1)X1-①-②②②②-③③③-④④-⑤⑤⑤-⑥⑥⑥-⑦-⑧
①: Pump Propagation Direction ④④: Pump Fiber Type ⑦: Fiber Length
F- Forward 02- MM-S105/125-22A 1- 1m
S - Specify SS - Specify S - Specify
②②②②: Signal Wavelength ⑤⑤⑤: Signal Fiber Type ⑧: Package Type
2000- 1900~2100nm 157- PM-GDF-10/130-2000-M P2- 70x12x8
SSSS - Specify SSS - Specify SS - Specify
③③③: Pump Wavelength ⑥⑥⑥: Output Fiber Type
793- 793nm 157- PM-GDF-10/130-2000-M
SSS - Specify SSS - Specify
-5 to 75
100
92
Max. Signal Insertion Loss (Input to Output) 1.5
Max. Pump Power Handling (Per Port)
Package
Operating Temperature
Storage Temperature -40 to 85
70(L) x12(W) x8(H)
Output Fiber PM-GDF-10/130-2000-M
Min. Pump Efficiency
Signal Wavelength 1900~2100
Pump Fiber MM-S105/125-22A
Signal Input Fiber
Min, PRE 17
PM-GDF-10/130-2000-M
Pump Wavelength 793
Polarization Maintaining (6+1)X1 Multimode Pump & Signal Combiner
19xx~20xxnm 30W
Specifications
Parameters Values
Form No.: D05-203-05 Rev.B
102
Spec Review No.:SR2210021A Date:Jul. 11, 2022
Unit
nm
-
-
W
%
%
°C
°C
mm
*Above specifications are for device without connector.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
MMPC-LC-3X1-①①-②②-③-④
①①: Pump Fiber Type ③:Fiber Length
77 - YOFC SI 135/155-22/320(DC) 1- 1m
SS - Specify S - Specify
②②:Output Fiber Type ④:Package Type
78 - PTIU220/242/325FA22 P3 - 100 x15 x10
SS - Specify S - Specify
Pump Fibers YOFC SI 135/155-22/320(DC)
Min.Pump Efficiency 95
Typ.Pump Efficiency 96
Package 100(L) x15(W) x10(H)
250
3X1 Multi-Mode Pump Combiner 100W
Specifications
Parameters Values
Pump Wavelength 976
Operating Temperature -5 to 75
Output Fiber PTIU220/242/325FA22
Max. Pump Power Handling(Each port)
Storage Temperature -40 to 85
Form No.: D05-203-05 Rev.B
103
Spec Review No.:SR2211009A Date:Apr. 11, 2022
Unit
nm
-
-
W
%
%
°C
°C
mm
*Above specifications are for device without connector.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
MMPC-LC-7X1-①①-②②-③-④
①①: Pump Fiber Type ②②: Output Fiber Type ③: Fiber Length
2 - MM- S105/125-0.22A 78 - MM-S220/242-22A 1.2 - 1.2m
SS - Specify SS - Specify S - Specify
④: Package Type
P3 - 100 x15 x10
S - Specify
Package 100(L) x15(W) x10(H)
Operating Temperature -5 to 75
Output Fiber MM-S220/242-22A
Handling Power (Pump Ports) 100
Pump Fibers MM-S105/125-0.22A
Storage Temperature -40 to 85
Min.Pump Efficiency 95
Typ.Pump Efficiency 96
7X1 Multi-Mode Pump Combiner 100W
Specifications
Parameters Values
Pump Wavelength 976
Form No.: D05-203-05 Rev.B
104
Spec Review No.: SR1407001C Date: Jul. 29, 2024
Unit
nm
nm
- 1x2 2x2
dB 1.4 1.8
dB 1.0 1.2
-
dB
dB
mW
N
-
℃
℃
* For devices with connectors, IL will be 0.7dB higher, RL will be 5dB lower.lower.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
SMFC-①①-②-③③-④-⑤⑤⑤⑤-⑥⑥⑥⑥-⑦-⑧⑧-⑨⑨
①①: Wavelength ④:Handling Power ⑦: Fiber Length
85 - 850nm 0.2 - 200mW 0.8 - 0.8m
SS - Specify S - Specify S - Specify
②: Port ⑤⑤⑤⑤: Connector Type on Port 1, 2, 3 & 4 ⑧⑧: Fiber Type
1 - 1x2 1G - FC/UPC 09 - HI 780 Fiber
2 - 2x2 2G - FC/APC SS - Specify
3D - SC/UPC
③③: Coupling Ratio 4D - SC/APC ⑨⑨: Package Type
5 - 5/95 N - None 01 - Ø5.5x35
50 - 50/50 SSSS - Specify
SS - Specify
⑥⑥⑥⑥: Fiber Jacket on Port 1, 2, 3 & 4
B - 250um Fiber
F - 900um Loose Tube(White)
SSSS - Specify
Single Mode Filter Coupler 7xx~8xxnm 300mW
Specifications
HI 780 fiber
* Above specifications are for devices without the connectors.
-40 to +85
5
-5 to +70
Operating Wavelength Range
Port Type
Max. Excess Loss
±40
200
Values
850
5±1.0% and 50%
50
0.15
Parameters
Center Wavelength
Storage Temperature
Min. Return Loss
Max. PDL
Max. Optical Power (CW,Total)
Max. Tensile Load
Max. Uniformity (only for 50/50)
Tap Ratio (Port 2/4)
Fiber Type
Operating Temperature
Unit:mm
Optical Path:Port 1 to Port2/3,Port 2 is Tap Port
Port 3 to Port1/4,Port 4 is Tap Port
Unit:mm
Unit:mm
Optical Path:Port 1 to Port2/3,Port 2 is Tap Port
Unit:mm
Form No.:D05-203-05 Rev.B
105
CAT-10-028B
Spec No.: CAT-10-028B Date:
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Type 1x2 2x2 1x2 2x2
Max. Excess Loss dB 1.0 1.4 0.8 1.0
Max. Uniformity (only for 50/50) dB 0.7 1.0 0.6 0.8
Tap Ratio (Port 2/4) %
Min. Return Loss dB
Max. PDL dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Fiber Type
Operating Temperature ℃
Storage Temperature ℃
* For devices with connectors, IL will be 0.5dB higher(1064nm),IL will be 0.3dB higher(1310nm&1550nm), RL will be 5dB lower.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
SMFC-①①-②-③③-④-⑤⑤⑤⑤-⑥⑥⑥⑥-⑦-⑧⑧-⑨⑨
①①: Wavelength ④:Handling Power⑦: Fiber Length
06 - 1060nm 0.3 - 300mW 0.8 - 0.8m
31 - 1310nm S - Specify S - Specify
55 - 1550nm
SS - Specify ⑤⑤⑤⑤: Connector Type on Port 1, 2, 3 & 4⑧⑧:Fiber Type
1B - FC/UPC 01 - HI-1060 Fiber
②: Port 2B - FC/APC 02 - SMF-28e Fiber
1 - 1x2 3D - SC/UPC S - Specify
2 - 2x2 4D - SC/APC
N - None⑨⑨ Package Type
③③: Coupling Ratio S - Specify 01 - Ø5.5x35
05 - 5/95
50 - 50/50 ⑥⑥⑥⑥: Fiber Jacket on Port 1, 2, 3 & 4
SS - Specify B - 250um Fiber
F - 900um Loose Tube(White)
G - 900um Loose Tube(Yellow)
E - 900um Loose Tube(Black)
S - Specify
-5 to +70
HI 1060 fiber
Single Mode Filter Coupler 9xx~19xxnm 500mW~10W
1064
Values
Specifications
1310 or 1550
* Above specifications are for devices without the connectors.
0.1,0.25 for Tap Ratio＜5%
±40
0.1±0.05%,1±0.2%, 2±0.4%, 5±1.0%, 10±2.0%, and 50%
50
-40 to +85
300
5
SMF-28e
1
Form No.:D05-203-05 Rev.A
106
CAT-09-017C
Polarization Maintaining Filter Coupler 10xxnm 500mW 2x2
Spec No.: CAT-09-017C Date:
Specifications
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Coupling Ratio (for Port 2 & 4 only) %
Min. Return Loss dB
Min. Extintion Ratio (only for F Type) dB
Min. Extintion Ratio (only for B Type) dB
Max. Excess Loss dB
Max. Uniformity (for 50/50 only) dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Fiber Type -
Operating Temperature ℃
Storage Temperature ℃
*Above specification are for devices without connector.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMFC-①-②-③-④-⑤-⑥⑥⑥⑥-⑦⑦⑦⑦-⑧-⑨-⑩
①: Wavelength ⑤: Handling Power ⑧: Fiber Length
06 - 1064nm 0.3 - 300mW 1 - 1.0m
03 - 1030nm S - Specify
S - Specify ⑥⑥⑥⑥: Connector Type on Port 1, 2&3
1A - FC/UPC ⑨: Fiber Type
②: Port 2A - FC/APC 04A - PM 980 Panda Fiber
2 - 2x2 3D - SC/APC 20A - PM980 on Port1&3，Hi1060 on Port 2&4
4D - SC/UPC S - Specify
③: Coupling Ratio N - None
01 - 01/99 S - Specify ⑩: Package Dimensions
02 - 02/98 01 - Ø5.5x35
05 - 05/95 ⑦⑦⑦⑦: Fiber Jacket on Port 1, 2&3 S - Specify
10 - 10/90 B - Bare Fiber
50 - 50/50 C - 900um Loose Tube(Red)
SS - Specify D - 900um Loose Tube(Blue)
E - 900um Loose Tube(Black)
④: Axis Alignment F - 900um Loose Tube(White)
F - Fast Axis Blocked SS - Specify
B - Both Axis Working
-5 to +70
-40 to +85
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER will be 2dB lower.
18
1.2
0.8
300
5
PM Panda Fiber
Values
1030, 1064
± 20
1±0.2, 2±0.4, 5±1.0, 10 & 50
50
20
Unit:mm
1 3
2
Optical Path of B Type:Port 1 to Port2/3,Port 2 is Tap Port
Port 3 to Port1/4,Port 4 is Tap Port
Optical Path of F Type:Port 1 to Port3/4,Port 4 is Tap Port
Port 3 to Port1/2,Port 2 is Tap Port
Unit:mm Form No.: D05-230-05 Rev.A
107
CAT-09-018D
Polarization Maintaining Filter Coupler 10xxnm 500mW 1x2
Spec No.: CAT-09-018D Date:
Parameter Unit
Center Wavelength nm
Operating Wavelength Range nm
Coupling Ratio (for Port 2 only) %
Min. Return Loss dB
Min. Extinction Ratio (only for B Type) dB
Min. Extinction Ratio (only for F Type) dB
Max. Excess Loss dB
Max. Uniformity (for 50/50 only) dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Fiber Type -
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMFC-①-②-③-④-⑤-⑥⑥⑥-⑦⑦⑦-⑧-⑨-⑩
①: Wavelength ⑤: Handling Power ⑧: Fiber Length
06 - 1064nm 0.3 - 300mW 1 - 1.0m
03 - 1030nm S - Specify
S - Specify ⑥⑥⑥: Connector Type on Port 1, 2&3
1A - FC/UPC ⑨: Fiber Type
②: Port 2A - FC/APC 04A - PM 980 Panda Fiber
1 - 1x2 3D - SC/APC 14A - PM980 on Port1&3，Hi1060 on Port 2
4D - SC/UPC S - Specify
③: Coupling Ratio N - None
01 - 01/99 S - Specify ⑩: Package Dimensions
02 - 02/98 01 - Ø5.5x35
05 - 05/95 ⑦⑦⑦: Fiber Jacket on Port 1, 2&3 S - Specify
10 - 10/90 B - Bare Fiber
50 - 50/50 C - 900um Loose Tube(Red)
SS - Specify D - 900um Loose Tube(Blue)
E - 900um Loose Tube(Black)
④: Axis Alignment F - 900um Loose Tube(White)
F - Fast Axis Blocked SS - Specify
B - Both Axis Working
PM Panda Fiber
-5 to +70
-40 to +85
0.8
0.5
300
5
1±0.2, 2±0.4, 5±1.0, 10 & 50
50
20
22
Specifications
Values
1030, 1064
± 20
3
Output (B)
Input (F)
Intput (B)
Output (F)
Tap
Form No.: D05-230-05 Rev.A
108
CAT-05-045D
High Power Polarization Maintaining Filter Coupler 10xxnm 5W
Spec No.: CAT-05-45D Date:
Parameter Unit
Center Wavelength nm
Operating Wavelength Range nm
Coupling Ratio (for Port 2 only) %
Min. Return Loss dB
Min. Extinction Ratio (only for B Type) dB
Min. Extinction Ratio (only for F Type) dB
Max. Excess Loss dB
Max. Uniformity (for 50/50 only) dB
Max. Optical Power (CW) W
Max. Peak Power for ns Pulse kW
Max. Tensile Load N
Fiber Type -
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors,IL will be 0.3dB higher,RL will be 5dB lower,ER will be 2dB lower and optical power is only 1000mW(CW).
*The PM fiber and the connector key are aligned to the slow axis.
Package Dimensions
Ordering Information
HPMFC-①①-②-③③-④-⑤⑤-⑥⑥⑥-⑦⑦⑦-⑧-⑨⑨-⑩⑩
①①: Wavelength ⑤⑤: Handling Power ⑧: Fiber Length
06 - 1064nm 01 - 1W 1 - 1.0m
03 - 1030nm 02 - 2W S - Specify
SS - Specify
⑥⑥⑥: Connector Type on Port 1, 2&3 ⑨⑨: Fiber Type
②: Port 1A - FC/UPC 04A - PM 980 Panda Fiber
1 - 1x2 2A - FC/APC 14A - PM980 on Port1&3，Hi1060 on Port 2
3D - SC/APC S - Specify
③③: Coupling Ratio 4D - SC/UPC
01 - 01/99 N - None ⑩⑩: Package Dimensions
02 - 02/98 SS - Specify 01 - Ø5.5x35
05 - 05/95 SS - Specify
10 - 10/90 ⑦⑦⑦: Fiber Jacket on Port 1, 2&3
50 - 50/50 B - Bare Fiber
SS - Specify C - 900um Loose Tube(Red)
D - 900um Loose Tube(Blue)
④: Axis Alignment E - 900um Loose Tube(Black)
F - Fast Axis Blocked F - 900um Loose Tube(White)
B - Both Axis Working SS - Specify
5
PM Panda Fiber
-5 to +70
-40 to +85
20
22
1.0
0.7
1, 2, or Specify
10
Specifications
Values
1030, 1064
± 20
1±0.2, 2±0.4, 5±1.0, 10 & 50
50
Intput (B)
Output (F)
Output (B)
Input (F)
Tap
Form No.: D05-230-05 Rev.A
109
Polarization Maintaining Filter Coupler 15xxnm 500mW CAT-09-019C
Spec No.: CAT-09-019C
Parameters Unit
Port Type - 1X2 2X2
Center Wavelength nm
Operating Wavelength Range nm
Max. Excess Loss dB 0.7 1.0
Max. Uniformity (only for 50/50) dB 0.4 0.6
Tap Ratio (Port 2/4) %
Min. Return Loss dB
Min. Extinction Ratio (only for F type) dB 22 22
Min. Extinction Ratio (only for B type) dB 20 18
Max. Tensile Load N
Operating Temperature ℃
Storage Temperature ℃
* For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, and ER will be 2dB lower.
* The PM fiber and the connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMFC-①-②-③-④-⑤-⑥⑥⑥⑥-⑦⑦⑦⑦-⑧-⑨-⑩
①: Wavelength ⑤: Handling Power ⑧: Fiber Length
31 - 1310nm 0.5 - 0.5W (only for Splitter) 1 - 1.0m
55 - 1550nm S - Specify
SS - Specify ⑥⑥⑥⑥: Connector Type on Port 1, 2, 3 & 4
1B - FC/UPC ⑨: Fiber Type
②: Port 2B - FC/APC (Step) 01B - PM1550 Fiber on all Port
1 - 1x2 3D - SC/UPC 07B - PM1310 Fiber on all port
2 - 2x2 4D - SC/APC 09 - Nufern PM1550-XP Fiber on all Port
N - None 13B - PM1550 on Port1 & 3, SMF-28e on Port 2
③: Coupling Ratio S - Specify S - Specify
01 - 1/99
10 - 10/90 ⑦⑦⑦⑦: Fiber Jacket on Port 1, 2, 3 & 4 ⑩: Package Dimensions
50 - 50/50 B - Bare Fiber 01 - Ø5.5x35
S - Specify C - 900um Loose Tube(Red) S - Specify
D - 900um Loose Tube(Blue)
④: Axis Alignment E - 900um Loose Tube(Black)
F - Fast Axis Blocked SS - Specify
B - Both Axis Working
Date:
Specifications
Values
1310 or 1550
±40
1±0.2, 2±0.4, 5±1.0, 10, and 50
* Above specifications are for devices without the connectors.
Fiber Type -
50
5
SMF-28e or PM Panda Fiber on Tap Port
PM Panda Fiber on Port 1 & Port 3
-5 to +70
-40 to +85
Optical Path of B Type:Port 1 to Port2/3,Port 2 is Tap Port
Optical Path of F Type:Port 3 to Port1/2,Port 2 is Tap Port.
Optical Path of B Type:Port 1 to Port2/3,Port 2 is Tap Port
Port 3 to Port1/4,Port 4 is Tap Port
Optical Path of F Type:Port 1 to Port3/4,Port 4 is Tap Port
Port 3 to Port1/2,Port 2 is Tap Port.
Form No.: D05-230-05 Rev.A
110
High Power Polarization Maintaining Filter Coupler 15xxnm 5W CAT-05-046C
Spec No.: CAT-05-046C
Parameters Unit
Port Type 1X2 2X2
Center Wavelength nm
Operating Wavelength Range nm
Max. Excess Loss dB 0.9 1.2
Max. Uniformity (only for 50/50) dB 0.6 0.8
Tap Ratio (Port 2/4) %
Min. Return Loss dB
Min. Extinction Ratio (only for F type) dB 22 22
Min. Extinction Ratio (only for B type) dB 20 18
Max. Optical Power (CW) W
Max. Peak Power for ns Pulse kW
Max. Tensile Load N
Operating Temperature ℃
Storage Temperature ℃
* For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER will be 2dB lower and optical power is only 1000mW(CW).
*The PM fiber and the connector key are aligned to the slow axis. And for F type, fast axis is blocked.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMFC-①①-②-③-④-⑤⑤-⑥⑥⑥⑥-⑦⑦⑦⑦-⑧-⑨-⑩⑩
①①: Wavelength ⑤⑤: Handling Power ⑧: Fiber Length
31 - 1310nm 01 - 1W (only for Splitter) 1 - 1.0m
55 - 1550nm 02 - 2W (only for Splitter) S - Specify
SS - Specify
⑥⑥⑥⑥: Connector Type on Port 1, 2, 3 & 4 ⑨: Fiber Type
②: Port 1B - FC/UPC 01B - PM1550 Fiber on all Port
1 - 1x2 2B - FC/APC 07B - PM1310 Fiber on all port
2 - 2x2 3D - SC/UPC 09 - Nufern PM1550-XP Fiber on all Port
4D - SC/APC 13B - PM1550 on Port1 & 3, SMF-28e on Port
2
③: Coupling Ratio N - None S - Specify
01 - 1/99 S - Specify
02 - 2/98 ⑩⑩: Package Dimensions
05 - 5/95 ⑦⑦⑦⑦: Fiber Jacket on Port 1, 2, 3 & 4 01 - Ø5.5x35
10 - 10/90 B - Bare Fiber S - Specify
50 - 50/50 C - 900um Loose Tube(Red)
S - Specify D - 900um Loose Tube(Blue)
E - 900um Loose Tube(Black)
④: Axis Alignment SS - Specify
F - Fast Axis Blocked
B - Both Axis Working
-5 to +70
-40 to +85
* Above specifications are for devices without the connectors.
Fiber Type
50
1, 2 or Specify (only for Splitter)
10
5
SMF-28e or PM Panda Fiber on Tap Port
PM Panda Fiber on Port 1 & Port 3
Date:
Specifications
Values
1310 or 1550
±40
1±0.2, 2±0.4, 5±1.0, 10 & 50
4
Unit:mm
3
2
1
Optical Path of B Type:Port 1 to Port2/3,Port 2 is Tap Port；
Optical Path of F Type:Port 3 to Port1/2,Port 2 is Tap Port.
Optical Path of B Type:Port 1 to Port2/3,Port 2 is Tap Port；
Port 3 to Port1/4,Port 4 is Tap Port；
Optical Path of F Type:Port 1 to Port3/4,Port 4 is Tap Port；
Port 3 to Port1/2,Port 2 is Tap Port.
Form No.: D05-230-05 Rev.A
111
CAT-05-059B
High Power Polarization Maintaining Filter Coupler 19xx~20xxnm 1~10W
Spec No.: CAT-05-059B
Parameters Unit
Port Type - 1X2 2X2
Center Wavelength nm
Operating Wavelength Range nm
Max. Excess Loss dB 1.2 1.5
Max. Uniformity (only for 50/50) dB 0.8 1.0
Tap Ratio (Port 2/4) %
Min. Return Loss dB
Min. Extinction Ratio (only for F type) dB 20 18
Min. Extinction Ratio (only for B type) dB 18 16
Max. Optical Power (CW) W
Max. Peak Power for ns Pulse kW
Max. Tensile Load N
Fiber Type -
Operating Temperature ℃
Storage Temperature ℃
* For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER will be 2dB lower, optical power is only 1W.
* The PM fiber and the connector key are aligned to the slow axis.
* For F type, fast axis is blocked, the input must be linear polarized light, and the input polarization must be aligned properly.
Package Dimensions
Ordering Information
1×2 HPMFC-①-②-③-④-⑤-⑥⑥⑥-⑦⑦⑦-⑧-⑨-⑩
2×2 HPMFC-①-②-③-④-⑤-⑥⑥⑥⑥-⑦⑦⑦⑦-⑧-⑨-⑩
①: Wavelength ④: Axis Alignment ⑦⑦⑦: Fiber Jacket on Port 1, 2&3
20 - 2000nm F - Fast Axis Blocked B - 250um Bare Fiber
S - Specify B - Both Axis Working C - 900um Loose Tube (Red)
R - 3mm Cable (Blue)
②: Port ⑤: Handling Power SS - Specify
1 - 1x2 01 - 1W
2 - 2x2 03 - 3W ⑧: Fiber Length
05 - 5W 0.8 - 0.8m
③: Coupling Ratio S - Specify S - Specify
01 - 1/99
02 - 2/98 ⑥⑥⑥: Connector Type on Port 1, 2&3 ⑨: Fiber Type
05 - 5/95 1A - FC/UPC 12 - Nufern PM1950 Fiber on all Port
10 - 10/90 2A - FC/APC S - Specify
50 - 50/50 3D - SC/UPC
S - Specify 4D - SC/APC ⑩: Package Dimensions
N - None 01 - Ø5.5x35
S - Specify 08 - 80*12*10
S - Specify
Date:
Specifications
Values
2000
±50
1±0.3, 2±0.6, 5±1.2, 10±2 & 50
-40 ~ +85
* Above specifications are for devices without the connectors.
50
1, 3, 5 or Specify (only for Splitter)
10
5
PM Panda Fiber
-5 ~ +70
Unit:mm
Unit:mm 4
3
1
Optical Path of B Type: Port 1 to Port 2/3, Port 2 is Tap Port.
Optical Path of F Type: Port 3 to Port 1/2, Port 2 is Tap Port.
1×2
Package for 6～10W
Package for 1～5W
Optical Path of B Type: Port 1 to Port 2/3, Port 2 is Tap Port,
Port 3 to Port 1/4, Port 4 is Tap Port.
Optical Path of F Type: Port 1 to Port 3/4, Port 4 is Tap Port,
Port 3 to Port 1/2, Port 2 is Tap Port.
2×2
Package for 1～5W
Package for 6～10W
3
2
1
3
1
2
1
2
3
4
1
2
3
4
Form No.: D05-230-05 Rev.A
112
Polarization Maintaining Filter Coupler 20xxnm 500mW CAT-10-015C
Spec No.: CAT-10-015C
Parameters Unit
Port Type - 1X2 2X2
Center Wavelength nm
Operating Wavelength Range nm
Max. Excess Loss dB 1.2 1.5
Max. Uniformity (only for 50/50) dB 0.8 1.0
Tap Ratio (Port 2/4) %
Min. Return Loss dB
Min. Extinction Ratio (only for F type) dB 20 18
Min. Extinction Ratio (only for B type) dB 18 16
Max. Optical Power (CW) mW
Max. Tensile Load N
Fiber Type
Operating Temperature ℃
Storage Temperature ℃
* For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMFC-①-②-③-④-⑤-⑥⑥⑥⑥-⑦⑦⑦⑦-⑧-⑨-⑩
①: Wavelength ⑤: Handling Power ⑧: Fiber Length
20 - 2000nm 0.5 - 0.5W (only for Splitter) 1 - 1.0m
SS - Specify S - Specify
⑥⑥⑥⑥: Connector Type on Port 1, 2, 3 & 4
②: Port 1A - FC/UPC ⑨: Fiber Type
1 - 1x2 2A - FC/APC 01A - PM 1550
2 - 2x2 3D - SC/UPC 17 - Nufern PM1950
4D - SC/APC S - Specify
③: Coupling Ratio N - None
01 - 1/99 S - Specify ⑩: Package Dimensions
10 - 10/90 01 - Ø5.5x35
50 - 50/50 ⑦⑦⑦⑦: Fiber Jacket on Port 1, 2, 3 & 4 S - Specify
S - Specify B - Bare Fiber
C - 900um Loose Tube(Red)
④: Axis Alignment D - 900um Loose Tube(Blue)
F - Fast Axis Blocked E - 900um Loose Tube(Black)
B - Both Axis Working SS - Specify
1±0.3%, 2±0.6%, 5±1.2%, 10%, and 50%
50
5
Date:
Specifications
Values
2000
* Above specifications are for devices without the connectors.
500 (only for Splitter)
PM Panda Fiber
-5 to +70
-40 to +85
±50
Optical Path of B Type:Port 1 to Port2/3,Port 2 is Tap Port
Optical Path of F Type:Port 3 to Port1/2,Port 2 is Tap Port.
Optical Path of B Type:Port 1 to Port2/3,Port 2 is Tap Port
Port 3 to Port1/4,Port 4 is Tap Port
Optical Path of F Type:Port 1 to Port3/4,Port 4 is Tap Port
Port 3 to Port1/2,Port 2 is Tap Port.
Form No.: D05-230-05 Rev.A
113
Spec Review No.: SR2411043A Date: Nov. 29, 2024
Specifications
Unit
nm
% 1/99 2/98 5/95 10/90 20/80 30/70 40/60 50/50
% ±0.3 ±0.6 ±0.8 ±1 ±1.8 ±2.2 ±2.5 ±3.0
Max. Excess Loss 25℃ dB
dB NA/18
dB
mW
N
℃
℃
-
mm
*Above specifications are for device without connector.
Package Dimensions
Ordering Information
PMSMC-①①-②-③③-④④④-⑤⑤⑤-⑥-⑦⑦-⑧⑧
①①: Wavelength ③③: Coupling Ratio ④④④: Connector Type ⑦⑦: Fiber Type
509 - 509nm 01 - 1/99 N - None 86 - PM480 Fiber
02 - 2/98
②: Port 05 - 5/95 ⑤⑤⑤: Fiber Jacket ⑧⑧: Package Dimensions
1 - 1X2 10 - 10/90 B - 250um Bare Fiber 13 - Ø3.0 x54
20 - 20/80 C - 900um Loose Tube(Red)
30 - 30/70 D - 900um Loose Tube(Blue)
40 - 40/60 E - 900um Loose Tube(Black)
50 - 50/50
SS - Specify ⑥: Fiber Length
1 - 1.0m
S - Specify
Polarization Maintaining Single Mode Standard Coupler 4xx~5xxnm 200mW
Min. Return Loss 25℃
Operating Temperature
Max. Optical Power (CW)
Max. Tensile Load
15/18 18/18
* The material must be RoHS compliant.
Coupling Ratio
509
1.2
Fiber Type
Storage Temperature
300
5
-5 to + 70
-40 to + 85
PM480 Fiber
Max. Coupling Ratio Tolerance 25℃
Package Dimensions Ø3.0X54
Parameters
Center Wavelength
Values
50
Min. Extinction Ratio 25℃
±
1
2
Form No.:D05-203-05 Rev.B
114
Spec Review No.: SR1809010B Date: Nov. 13, 2023
Specifications
Unit
nm
nm
% 1/99 2/98 3/97 5/95 10/90 20/80 30/70 40/60 50/50
dB 24/1.2 19.0/1.3 18.3/1.4 17.0/1.6 13.0/1.9 8.5/2.4 6.7/2.9 5.4/3.6 4.5
dB
mW
N
℃
℃
-
mm
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.7dB higher,RL will be 5dB lower.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
SMC-①①②③③-④④④⑤⑤⑤-⑥-⑦⑦⑧⑧
①①: Wavelength ③③: Coupling Ratio ④④④: Connector Type on all Ports⑥: Fiber Length
518 - 518nm 01 - 1/99 1G - FC/UPC 1 - 1.0m
532 - 532nm 02 - 2/98 2G - FC/APC S - Specify
SS - Specify 03 - 3/97 N - None
05 - 5/95 S - Specify
②: Port 10 - 10/90⑦⑦: Fiber Type
1 - 1X2 20 - 20/80 ⑤⑤⑤: Fiber Jacket on all Ports 54 - Nufern 460-HP Fiber
2 - 2X2 30 - 30/70 B - 250um Bare Fiber S - Specify
40 - 40/60 C - 900um Loose Tube (Red)
50 - 50/50 D - 900um Loose Tube (Blue) ⑧⑧: Package Dimensions
SS - Specify E - 900um Loose Tube (Black) 13 - Ø3.0x54mm
F - 900um Loose Tube (White)
Single Mode Standard Coupler 4xx~5xxnm 200mW
Min. Return Loss (Port2/Port1)
Operating Temperature
Max. Optical Power (CW)
Max. Tensile Load
Parameters
Center Wavelength
Values
Operating Wavelength Range
Coupling Ratio (Port2/Port1)
Package Dimensions Ø3.0X54
200
5
0 to + 70
Storage Temperature -40 to + 75
518 or 532
±15
Fiber Type Nufern 460-HP Fiber
50
Max. Insertion Loss @Central
wavelength (Port 3→2,1)
Mark: Port 1 (Red) Port 4 (Black) Port 2/3 (Clear) for 250um Bare Fiber,
1
1
±
1
2
Form No.:D05-203-05 Rev.B
115
Spec Review No.: SR2109020A Date: Sep. 15, 2021
Specifications
Unit
nm
nm
% 1/99 2/98 5/95 10/90 20/80 30/70 40/60 50/50
% ±0.5 ±0.8 ±1.5 ±2.2 ±2.5 ±3.0 ±4.0 ±5.0
dB
dB NA/15 12/15 12/15 12/15 15/15 15/15 15/15 15/15
dB
mW
N
℃
℃
-
mm
* Above specifications are for devices without the connectors.
* For devices with connectors, IL will be 1.0dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMSMC-①①-②-③③-④④④④-⑤⑤⑤⑤-⑥
①①: Wavelength ③③: Coupling Ratio ④④④④: Connector Type ⑥: Fiber Length
74 - 740nm 01 - 1/99 1 - FC/UPC 1 - 1.0m
SS - Specify 02 - 2/98 2 - FC/APC S - Specify
05 - 5/95 3 - SC/UPC
②: Port 10 - 10/90 4 - SC/APC
1 - 1X2 20 - 20/80 N - None
2 - 2X2 30 - 30/70 S - Specify
40 - 40/60
50 - 50/50 ⑤⑤⑤⑤: Fiber Jacket
SS - Specify B - 250um Fiber
L - 900um Loose Tube
S - Specify
Coupling Ratio
Operating Wavelength Range
Max. Coupling Ratio Tolerance
50
Min. Extinction Ratio
Min. Return Loss
Max. Excess Loss
±10
5
-5 to + 70
1.0
500
Package Dimensions Ø3.0x54
Fiber Type Nufern PM630-HP fiber
Polarization Maintaining Single Mode Standard Coupler 6xxnm 300mW
Parameters
Center Wavelength
Storage Temperature -40 to + 75
Operating Temperature
Max. Optical Power (CW)
Max. Tensile Load
Values
740
1
1
±
Mark: Port 1 (Red) Port 4 (Black) Port 2/3 (Clear) for 250um Bare Fiber,
Form No.:D05-203-05 Rev.B
116
Spec Review No.: SR2402018A Date: Feb. 20, 2024
Specifications
Unit
nm
nm
%
dB
dB
dB
mW
N
°C
°C
-
mm
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.9dB higher,RL will be 5dB lower.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
SMC-①①-②-③③-④④④-⑤⑤⑤-⑥-⑦⑦-⑧⑧
①①: Wavelength ③③: Coupling Ratio ⑤⑤⑤: Fiber Jacket ⑥: Fiber Length
63 - 630nm 10 - 10/90 B -250um Bare Fiber2 - 2.0m
SS - Specify S - Specify
④④④: Connector Type
②: Port 1B - FC/UPC ⑦⑦:Fiber Type
1 - 1X2 2B - FC/APC 24 - 630-HP Fiber
2 - 2X2 N - None
S - Specify⑧⑧: Package Dimensions
16 - Ø3.0x56
C - 900um Loose Tube(Red)
D - 900um Loose Tube(Blue)
E - 900um Loose Tube(Black)
F - 900um Loose Tube(White)
Package Dimensions Ø3.0X56
5
0 to + 70
Storage Temperature -40 to + 75
Fiber Type 630 HP Fiber
Operating Temperature
Max. Tensile Load
Coupling Ratio
630
±10
Max. Optical Power (CW) 100
Directivity 50
Single Mode Standard Coupler 6xxnm 300mW
Min. Return Loss 50
Max. Insertion Loss
10/90
11.5/1.2
Parameters
Center Wavelength
Values
Operating Wavelength Range
3
1
2
1
Mark: Port 1 (Red) Port 4 (Black) Port 2/3 (Clear) for 250um Bare Fiber,
1
1
56±1
56±1
Form No.:D05-203-05 Rev.B
117
Spec Review No.: SR2202013A Date: Feb. 16, 2022
Specifications
Unit
nm
nm
% 1/99 2/98 5/95 10/90 20/80 30/70 40/60 50/50
% ±0.5 ±0.8 ±1.5 ±2.2 ±2.5 ±3.0 ±4.0 ±5.0
dB
dB NA/17 14/17 14/17 14/17 17/17 17/17 17/17 17/17
dB
mW
N
℃
℃
-
mm
* Above specifications are for devices without the connectors.
* For devices with connectors, IL will be 0.7dB higher, RL will be 5dB lower and ER will be 2dB lower.
* The PM fiber and the connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMSMC-①①-②-③③-④④④④-⑤⑤⑤⑤-⑥
①①: Wavelength ③③: Coupling Ratio ④④④④: Connector Type on all Ports ⑥: Fiber Length
87 -870nm 01 - 1/99 1 - FC/UPC 1 - 1.0m
93 - 935nm 02 - 2/98 2 - FC/APC S - Specify
SS - Specify 05 - 5/95 3 - SC/UPC
10 - 10/90 4 - SC/APC
②: Port 20 - 20/80 N - None
1 - 1X2 30 - 30/70 S - Specify
2 - 2X2 40 - 40/60
50 - 50/50 ⑤⑤⑤⑤: Fiber Jacket on all Ports
SS - Specify B - 250um Fiber
L - 900um Loose Tube
S - Specify
Polarization Maintaining Single Mode Standard Coupler 7xx~8xxnm 300mW
Parameters
Center Wavelength
Storage Temperature -40 to + 75
Operating Temperature
Max. Optical Power (CW)
Max. Tensile Load
Values
870, 935
Package Dimensions Ø3.0x54
Fiber Type Nufern PM780-HP fiber
5
-5 to + 70
0.8
500
Coupling Ratio
Operating Wavelength Range
Max. Coupling Ratio Tolerance
50
Min. Extinction Ratio
Min. Return Loss
Max. Excess Loss
±10
1
1
±
Mark: Port 1 (Red) Port 4 (Black) Port 2/3 (Clear) for 250um Bare Fiber,
Form No.:D05-203-05 Rev.B
118
Spec Review No.: SR2310034A Date: Oct. 16, 2023
Unit
nm
nm
% 50/50 40/60 30/70 20/80 10/90 5/95 3/97 2/98 1/99
dB 3.5 4.5/2.7 5.8/2.0 7.7/1.3 10.8/0.85 14.0/0.5 16.5/0.4 18.5/0.35 21.5/0.3
dB 0.1 0.1 0.1 0.1 0.15/0.05 0.15/0.05 0.15/0.05 0.15/0.05 0.15/0.05
dB
dB
mW
N
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.7dB higher, RL will be 5dB lower.
*The material must be RoHS compliant.
Package Dimensions
Ordering information
SMC-①①-②-③③-④④④④-⑤⑤⑤⑤-⑥-⑦⑦-⑧⑧
①①: Wavelength ③③: Coupling Ratio ④④④④: Connector Type ⑥: Fiber Length
78 - 780nm 50 - 50/50 1B - FC/UPC 1 - 1m
SS - Specify 40 - 40/60 2B - FC/APC S- Specify
30 - 30/70 3D - SC/UPC
②: Port 20 - 20/70 4D - SC/APC ⑦⑦:Fiber Type
1 - 1X2 10 - 10/90 S - Specify 13 - HI780 Fiber
2 - 2X2 05 - 5/95 14 - Nufern 780-HP Fiber
03 - 3/97 ⑤⑤⑤⑤: Fiber Jacket
02 - 2/98 B -250um Bare Fiber ⑧⑧:Package Dimensions
01 - 1/99 C - 900um Loose Tube(Red) 14 - Ø3.0X40
SS - Specify D - 900um Loose Tube(Blue) 16 - Ø3.0X56
E - 900um Loose Tube(Black)
F - 900um Loose Tube(White)
5
-5 to +70
Single Mode Standard Coupler 7xx~8xxnm 300mW
Specifications
Values
780
Parameters
Center Wavelength
Max. Optical Power CW
900um Loose Tube Ø3.0 X 56
Operating Wavelength Range
Coupling Ratio
Max. Insertion Loss
Min. Return Loss
Min. Directivity
Package Dimensions mm
Max. Polarization Dependent Loss
Max. Tensile Load
Operating Temperature
±10
250um Bare Fiber Ø3.0 X 40
-40 to +85
50
50
Storage Temperature
500
1
1
Mark: Port 1(Red) Port 2/3 (Clear) Port 4 (Black)for 250um Bare Fiber;
L 1
￡?
Port 1(Red) Port 2(Blue)Port 3(Black) for 900um Loose Tube:
Form No.:D05-203-05 Rev.B
119
CAT03021C
Spec No.: CAT-03-021C Date:
Unit Premium A grade Premium A grade
nm
nm
% ±5.0 ±6.0 ±5.0 ±6.0
% ±4.0 ±4.8 ±4.0 ±4.8
% ±3.0 ±3.7 ±3.0 ±3.7
% ±2.5 ±3.0 ±2.5 ±3.0
% ±2.2 ±2.4 ±2.2 ±2.4
% ±1.5 ±1.7 ±1.5 ±1.7
% ±1.1 ±1.3 ±1.1 ±1.3
% ±0.8 ±1.0 ±0.8 ±1.0
% ±0.5 ±0.6 ±0.5 ±0.6
dB 18 15 20 17
dB 14 11 16 13
dB NA NA NA NA
dB 0.8 1.0 0.4 0.6
dB
mW
℃
℃
-
mm
mm
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB (1310~2000) or 0.5dB (980~1064) higher, ER will be 2dB lower and RL will be 5dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
* The material must be RoHS compliant.
①①: Wavelength ③③: Coupling Ratio④④④④: Connector Type ⑥: Fiber Length
98 - 980nm 01 - 1/99 1B - FC/UPC 1 - 1.0m
03 - 1030nm 02 - 2/98 2B - FC/APC S - Specify
06 - 1064nm 05 - 5/95 3B - SC/UPC
31 - 1310nm 10 - 10/90 4B - SC/APC ⑦⑦: Fiber Type
55 - 1550nm 20 - 20/80 N - None 01 - PM 980 Fiber
19 - 1940nm 30 - 30/70 S - Specify 02 - PM 980 Fiber(长飞）
20 - 2000nm 40 - 40/60 03 - Nufern PM980-XP fiber
SS - Specify 50 - 50/50⑤⑤⑤⑤: Fiber Jacket 04 - PM1550 Fiber
SS - Specify B -250um Bare Fiber 05 - PM 1550 Fiber(长飞）
②: Port C - 900um Loose Tube(Red) 06 - Nufern PM1550-XP Fiber
1 - 1X2 D - 900um Loose Tube(Blue) 30 - PM1950 Fiber
2 - 2X2 E - 900um Loose Tube(Black)
F - 900um Loose Tube(White) ⑧⑧: Package Size
12 - Ø3.0×50
14 - Ø3.0×40
16 - Ø3.0×56
Package Dimensions
Ordering Information
PMSMC-①①-②-③③-④④④④-⑤⑤⑤⑤-⑥-⑦⑦-⑧⑧
Package
Dimensions Ø3.0×56
Ø3.0×50 or Ø3.0×40
50
-5～70
-40～85
PM Fiber
500
980,1030,1064 or Specify 1310,1480,1550,1940,2000 or Specify
Polarization Maintaining Single Mode Standard Coupler 9xx~20xxnm 500mW
Min. Polarization
Extinction Ratio
Max. Splitting
Ratio Tolerance
(CR)
Center Wavelength
±20 ±20
Specifications
Parameters
Operating W.L.
2/98
Min. Return loss
CR＞10%
10%≥CR＞1%
CR≤1%
50/50
40/60
30/70
20/80
1/99
10/90
5/95
3/97
Fiber Type
250um Bare Fiber
900um Loose Tube
Max. Power Handling
Operating Temperature
Storage Temperature
Max. Excess Loss
1
L
2
1
±
Form No.: D05-230-05 Rev.A
120
CAT-03-012C
Spec No.: CAT-03-012C Date:
Parameters Unit
Operating Wavelength nm
Bandwidth nm
Coupling Ratio % 1/99 2/98 3/97 5/95 10/90 20/80 30/70 40/60 50/50
Max. Insertion Loss dB 21.9/0.25 18.5/0.3 16.5/0.35 14.5/0.45 11.0/0.7 7.7/1.3 5.8/2.0 4.5/2.7 3.5
Max. PDL(Tap/Through Port) dB 0.12/0.05 0.12/0.05 0.12/0.05 0.10/0.05 0.10/0.05 0.08 0.08 0.08 0.08
Wavelength Dependent Loss dB 0.4/0.15 0.4/0.15 0.4/0.15 0.4/0.15 0.3/0.15 0.3/0.15 0.3/0.15 0.2 0.2
Min. Return Loss dB
Min. Directivity dB
Max. Optical Power CW mW
Max. Tensile Load N
Thermal Stability dB/℃
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
* The material must be RoHS compliant.
Package Dimensions
Ordering information
SMC-①①-②-③③-④④④④-⑤⑤⑤⑤-⑥-⑦⑦-⑧⑧
①①: Wavelength ④④④④: Connector Type on all Ports ⑥: Fiber Length
06 - 1060 1B - FC/UPC 1 - 1m
98 - 980 2B - FC/APC S - Specify
SS - Specify 3B - SC/UPC
4B - SC/APC ⑦⑦: Fiber Option
②: Port N - None 66 - OFS980 Fiber
1 - 1X2 S - Specify 20 - HI1060 Flex Fiber
2 - 2X2 1E - HI1060 Fiber
⑤⑤⑤⑤: Fiber Jacket on all Ports 22 - SM-GSF-10/125 Fiber
③③: Coupling Ratio B -250um Bare Fiber S - Specify
01-1/99 C - 900um Loose Tube(Red)
02-2/98 D - 900um Loose Tube(Blue) ⑧⑧:Package Dimensions
03-3/97 E - 900um Loose Tube(Black) 14 - Ø3.0X40
05-5/95 F - 900um Loose Tube(White) 16 - Ø3.0X56
10-10/90 T - 3mm松套管(黄色) 29 - 90x16x9
20-20/80
30-30/70
40-40/60
50-50/50
SS-Specify
mm
3mm loose cable 90X16X9
50
500
Specifications
Values
980 or 1060
±10
Single Mode Standard Coupler 9xx~10xxnm 500mW
250um bare fiber Ø3.0 X 40
5
50
≤ 0.002 over -5 °C to +70 °C
-5 to +70
-40 to +85
Package Dimensions 900um loose tube Ø3.0 X 56
.
;
1(Black) for 900um Loose Tube;
,
.
3
1
Mark: Port 1(Red)Port 4(Black) Port 2/3(Clear) for 250um Bare Fiber,
;
;
.
Form No.: D05-230-05 Rev.A
121
CAT03015C
Spec No.: CAT-03-015C Date:
Unit
nm
nm
%
%
%
%
%
%
%
%
%
dB
dB
dB
dB
dB
W
℃
℃
-
mm
mm
*Above specifications are for device without connector.
*The PM fiber and the connector key are aligned to the slow axis.
* The material must be RoHS compliant.
1.0
±4.8
±3.7
±3.0
±1.7
±1.3
15
11
NA
16
NA
±5.0
±4.0
±3.0
±2.5
±6.0
±0.6
±2.2
±1.5
±1.1
±0.8
±0.5
±2.4
±1.0
0.4
±6.0
±4.8
±3.7
±3.0
±2.4
±1.7
±1.3
±1.0
20
0.8
±4.0
±3.0
±2.5
±1.5
±1.1
±0.8
18
14
NA
±5.0
1,3,5,10,20 or Specify
-5～70
-40～85
±2.2
NA
0.6
50
±0.5 ±0.6
980,1030,1064 or Specify 1310,1480,1550,1940,2000 or Specify
±20 ±20
Parameters Premium A grade Premium A grade
Operating W.L.
Max. Excess Loss
Min. Return Loss
CR＞10%
10%≥CR＞1%
CR≤1%
40/60
30/70
2/98
High Power Polarization Maintaining Single Mode Standard Coupler 9xx~20xxnm 20~50W
Min. Polarization
Extinction Ratio
Max. Splitting Ratio
Tolerance
(CR)
Center Wavelength
Specifications
50/50
1/99
20/80
10/90
5/95
Package
Dimensions
*For devices with connectors, IL will be 0.3dB (1310~2000) or 0.5dB (980~1064) higher, ER will be 2dB lower, RL will be 5dB lower and optical
power is only 1W.
Ø3.0×56
75×12×8
Power Handling 5W
Power Handling 20W
3/97
PM Fiber
Package Dimensions
Fiber Type
Max. Power Handling
Operating Temperature
Storage Temperature
17
13
3
1
Form No.: D05-230-05 Rev.A 1/2
122
CAT03015C
①①: Wavelength ③③: Coupling Ratio ⑤⑤⑤⑤: Connector Type ⑧⑧: Fiber Type
98 - 980nm 01 - 1/99 1B - FC/UPC 01 - PM 980 Fiber
03 - 1030nm 02 - 2/98 2B - FC/APC 02 - PM 980 Fiber(长飞）
06 - 1064nm 05 - 5/95 3B - SC/UPC 03 - Nufern PM980-XP fiber
31 - 1310nm 10 - 10/90 4B - SC/APC 04 - PM1550 Fiber
55 - 1550nm 20 - 20/80 N - None 05 - PM 1550 Fiber(长飞）
19 - 1940nm 30 - 30/70 S - Specify 06 - Nufern PM1550-XP Fiber
20 - 2000nm 40 - 40/60 30 - PM1950 Fiber
SS - Specify 50 - 50/50 ⑥⑥⑥⑥: Fiber Jacket
SS - Specify B - 250um Bare Fiber ⑨⑨: Package Size
②: Port 16 - Ø3.0×56
1 - 1X2 ④④:Handling Power ⑦: Fiber Length 27 - 75×12×8
2 - 2X2 01 - 1W 1 - 1.0m S - Specify
03 - 3W S - Specify
05 - 5W
10 - 10W
20 - 20W
SS - Specify
HPMSMC-①①-②-③③-④④-⑤⑤⑤⑤-⑥⑥⑥⑥-⑦-⑧⑧-⑨⑨
Ordering Information
1
±
1
2
±1
Form No.: D05-230-05 Rev.A 2/2
123
CAT03016B
Spec No.: CAT-03-016B Date:
Specifications
Parameter
*Above specifications are for device without connector.
*For devices with connectors, IL should be 0.3dB(1310~1550) or 0.5dB(980~1060) or 0.3dB(1940~2000) higher, and RL will be 5dB lower,Max.
Power handling only 1W.
*Port Mark with Digital labeling.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPSMC-①①-②-③③-④④-⑤⑤⑤⑤-⑥⑥⑥⑥-⑦-⑧⑧-⑨⑨
①①: Wavelength ③③: Coupling Ratio ④④:Max. Power handling (W) ⑥⑥⑥⑥: Fiber Jacket ⑧⑧: Fiber Type
98 - 980nm 0.1 - 0.1/99.9 01 - 1W B -250um Bare Fiber 1E - HI1060 Fiber
03 - 1030nm 01 - 1/99 05 - 5W C - 900um Loose Tube(Red) 20 - HI1060 Flex Fiber
06 - 1060nm 02 - 2/98 10 - 10W D - 900um Loose Tube(Blue) 09 - SMF-28e Fiber
31 - 1310nm 03 - 3/97 20 - 20W E - 900um Loose Tube(Black) 29 - SM1950 Fiber
55 - 1550nm 05 - 5/95 S - Specify F - 900um Loose Tube(White)
19- 1940nm 10 - 10/90 ⑨⑨: Package
20 - 2000nm 20 - 20/80 ⑤⑤⑤⑤: Connector Type ⑦: Fiber Length 16 - Ø3×56
SS - Specify 30 - 30/70 1B - FC/UPC 1 - 1.0m 27 - 75×12×8
40 - 40/60 2B - FC/APC S - Specify
②: Port 50 - 50/50 3B - SC/UPC
1 - 1X2 SS - Specify 4B - SC/APC
2 - 2X2 N - None
S - Specify
0.15
11/0.9
CR≥30%
14.5/0.6
16.5/0.5
18.4/0.45
21.8/0.4
28～32/0.4
0.1
2/98
980±10,1030±10,1060±10nm
3.6
4.6/2.8
5.9/2.2
7.9/1.5
Min. Directivity (dB)
40/60
Max. IL(dB)
30/70
10/90
30%＞CR≥1%
5/95
1/99
0.1/99.9
-5～75
Fiber type HI1060 Fiber, HI1060 Flex Fiber
Power handling 20W
SMF-28e Fiber SMF-28e Fiber, SM1950 Fiber
Operating temperature(℃)
Power handling 10W
75×12×8
Max. Power handling (W)
Storage temperature (℃)
0.15
-40～85
50
1, 5, 10, 20
0.15
Dimension:(mm)
Ø3×56
28～32/0.3
20/80
High Power Single Mode Standard Coupler 9xx~20xxnm 20~50W
50
NA
CR
Max. PDL(dB)
50/50
Min. Return Loss (dB)
CR＜1%
3/97
1310,1480,1550±20nm
3.5
4.5/2.7
5.8/2.0
7.7/1.3
10.85/0.75
14/0.45
Wavelength
0.1
14.5/0.65
16.35/0.35
18.25/0.35
21.5/0.3
17.0/0.55
18.5/0.55
22.0/0.5
28～32/0.5
0.1
11.2/0.95
1940,2000±20nm
3.7
4.9/2.9
6.0/2.2
7.9/1.6
.
10cm to component
1
1
Mark: Port 1(Red)Port 4(Black) Port 2/3(Clear) for 250um Bare Fiber, 10cm to
;
Form No.: D05-230-05 Rev.A
124
CAT03005F
Spec No.: CAT-03-005F Date:
Specifications
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Coupling Ratio % 1/99 2/98 3/97 5/95 10/90 20/80 30/70 40/60 50/50
Max. Insertion Loss (Tap/Through Port) dB 21.5/0.2 18.5/0.3 16.5/0.3 14.6/0.4 10.8/0.6 7.4/1.2 5.6/1.8 4.4/2.5 3.4
Max. PDL (Tap/Through Port) dB 0.3/0.05 0.3/0.05 0.3/0.05 0.3/0.05 0.25/0.05 0.25/0.05 0.25/0.05 0.25/0.05 0.1
Min. Return Loss dB
Min. Directivity dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Thermal Stability dB/°C
Operating Temperature °C
Storage Temperature °C
Fiber Type -
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
SMC-①①-②-③③-④④④④-⑤⑤⑤⑤-⑥-⑦⑦-⑧⑧
①①: Wavelength ④④④④: Connector Type ⑥: Fiber Length
31 - 1310nm 1B - FC/UPC 1 - 1.0m
55 - 1550nm 2B - FC/APC S - Specify
SS - Specify 3B - SC/UPC
4B - SC/APC ⑦⑦:Fiber Type
②: Port N - None 09 - SMF-28e Fiber
1 - 1X2 S - Specify
2 - 2X2 ⑧⑧:Package Dimensions
⑤⑤⑤⑤: Fiber Jacket 14 - Ø3.0X40
③③: Coupling Ratio B -250um Bare Fiber 16 - Ø3.0X56
01 - 1/99 C - 900um Loose Tube(Red) 29 - 90x16x9
02 - 2/98 D - 900um Loose Tube(Blue)
03 - 3/97 E - 900um Loose Tube(Black)
05 - 5/95 F - 900um Loose Tube(White)
10 - 10/90 T - 3mm松套管(黄色)
20 - 20/80
30 - 30/70
40 - 40/60
50 - 50/50
SS - Specify
5
500
50
≤ 0.002 over -5 °C to +70 °C
SMF-28e Fiber
-40 to + 85
-5 to + 70
Package Dimensions mm 900um Loose Tube Ø3.0X56
3mm Loose Cable 90X16X9
Single Mode Standard Coupler 15xxnm 500mW
Values
1310 or 1550
±20
50
250um Bare Fiber Ø3.0X40
.
;
1(Black) for 900um Loose Tube;
,
.
3
1
Mark: Port 1(Red)Port 4(Black) Port 2/3(Clear) for 250um Bare Fiber,
;
;
.
Form No.: D05-230-05 Rev.A
125
CAT03014B
Spec No.: CAT-03-014B Date:
Specifications
Parameter
*Above specifications are for device without connector.
*For devices with connectors, IL should be 0.3dB higher, and RL will be 20dB lower,Max. Power handling only 1W.
*Port Mark with Digital labeling.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
HMMC-①①-②-③③-④④-⑤⑤⑤⑤-⑥⑥⑥⑥-⑦-⑧⑧-⑨⑨
①①: Wavelength ③③: Coupling Ratio ④④: Max. Power handling (W) ⑥⑥⑥⑥: Fiber Jacket ⑧⑧: Fiber Type
91 - 915nm 01 - 1/99 01 - 1W B - 250um Fiber 07 - MM-S105/125-22A Fiber
97 - 975nm 02 - 2/98 05 - 5W 08 - MM-S105/125-15A Fiber
S - Specify 03 - 3/97 10 - 10W ⑦: Fiber Length S - Specify
05 - 5/95 20 - 20W 1 - 1.0m
10 - 10/90 30 - 30W S - Specify ⑨⑨: Package
20 - 20/80 27- 75×12×8
②: Port 30 - 30/70 ⑤⑤⑤⑤: Connector Type 16 - Ø3.0×56
1 - 1X2 40 - 40/60 1B - FC/UPC
2 - 2X2 50 - 50/50 2B - FC/APC
S - Specify 3B - SC/UPC
4B - SC/APC
N - None
S - Specify
40
1, 5, 10, 20, 30
Min. Return Loss (dB)
Max. Power handling (W)
Power handling 30W
Operating temperature(℃)
Storage temperature (℃)
Fiber type
Power handling 5W
Dimension:
3/97
2/98
10/90
5/95
1/99
75×12×8
Ø3×56
-5～75
-40～85
105/125 0.15NA or 0.22NA
915,975±15nm
16.5/0.95
6.3/2.4
4
8.1/1.8
11.6/1.2
15.0/1.0
40/60 5.0/3.0
30/70
20/80
High Power Muti-Mode Standard Coupler
Wavelength
CR
50/50
Max. IL(dB)
18.6/0.9
21.5/0.8
1
3
;
Form No.: D05-230-05 Rev.A
126
CAT-09-032D
Spec No.: CAT-09-032D Date:
Specifications
Unit Values
Wavelength Range nm 1520~1580
Max. Insertion Loss dB 0.7
Typ. Insertion Loss dB 0.5
Min. Isolation dB 25
Typ. Isolation dB 30
Wavelength Range nm 960~990
Max. Insertion Loss dB 0.6
Typ. Insertion Loss dB 0.4
Min. Isolation dB 12
Typ. Isolation dB 15
dB 50
dB 60
dB 20
dB 22
dB/℃ ≤0.005
mW 500
N 5
- PM 1550 Panda Fiber for Port 1/3, Hi 1060 Fiber for Port 2
℃ -5 to +70
℃ -40 to +85
*For devices with connectors, IL will be 0.3dB higher, ER will be 2dB lower and RL will be 5dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Ordering Information
PMFWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ④④④: Fiber Jacket on Port 1, 2 & 3 ⑥⑥: Fiber Type
5598 - 1550nm Pass / 980nm Reflect B - 250um Bare Fiber 04A - PM 1550 for 1/3, Hi 1060 for 2
C - 900um Loose Tube(Red) 05A - PM 1550 for 1/3, PM 980 for 2
②②:Handling Power D- 900um Loose Tube(Blue) 06A - PM 1550 for 3, PM 980 for 1&2
0.5 - 500mW F- 900um Loose Tube(White)
S - Specify ⑦⑦: Package
③③③: Connector Type on Port 1, 2 & 3 01 - Ø5.5x35mm
1A - FC/UPC ⑤: Fiber Length 08 - 80*12*10
2A - FC/APC 0.8 - 0.8m
3D - SC/UPC S - Specify
4D - SC/APC
N - None
S - Specify
Max. Tensile Load
Fiber Type
Min. Extinction Ratio
Typ. Extinction Ratio
Thermal Stability
Polarization Maintaining FWDM 980/1550nm 300mW
Parameters
Pass Band
Reflection Band
Min. Return Loss
Package Dimensions
Min. Directivity(over 960~990nm)
Max. Optical Power (CW)
*Above specifications are for device without connector.
Operating Temperature
Storage Temperature
1
Pass
Reflect
Common
Form No.: D05-230-05 Rev.A
127
CAT-04-010D
Spec No.:CAT-04-010D Date:
Unit
1270-1350 1450-1490 1500-1520 950-1010
(1530-1600) (1530-1580) (1530-1570) (1500-1600)
Typ. Insertion Loss dB 0.4 0.4 0.5 0.5
Max. Insertion Loss dB 0.6 0.6 0.7 0.7
Typ. Isolation dB 35 30 35 35
Min. Isolation at 23℃ dB 30 25 30 30
1530-1600 1530-1580 1530-1570 1500-1600
(1270-1350) (1450-1490) (1500-1520) (950-1010)
Typ. Insertion Loss dB
Max. Insertion Loss dB
Typ. Isolation dB
Min. Isolation at 23℃ dB
dB
dB
dB
dB/℃
mW
N
SMF-28e Fiber
for all ports
SMF-28e Fiber
for all ports
SMF-28e Fiber
for all ports
SMF-28e Fiber for pass port; HI 1060
Fiber for common and reflect ports.
℃
℃
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
Ordering Information
FWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤: Fiber Length
3155 - 1310nm Pass / 1550nm Reflect 1A - FC/UPC 1 - 1.0m
5531 - 1550nm Pass / 1310nm Reflect 2A - FC/APC(Step) S - Specify
4855 - 1480nm Pass / 1550nm Reflect 3A SC/UPC
5548 - 1550nm Pass / 1480nm Reflect N - None ⑥⑥: Fiber Type
5155 - 1510nm Pass / 1550nm Reflect S - Specify 01-SMF-28e
5551 - 1550nm Pass / 1510nm Reflect 05 - Pump&Common Hi1060，
5598 - 1550nm Pass / 980nm Reflect ④④④: Fiber Jacket on Port 1, 2 & 3 Signal SMF-28e
B - 250um Fiber
②②: Handling Power F - 900um Loose Tube(White) ⑦⑦：Package Dimensions
01 - 1W S - Specify 01 - Ø5.5x35
0.5 - 0.5W 02 - Ø5.5x40
SS - Specify 03 - Ø5.5x50
FWDM 980/1550nm 1310/1550nm 1480/1550nm 1510/1550nm 300mW
nm
-40 to +85
Specifications
Values
0.3
0.5
Parameters
Pass Band
Reflection Band
15
12
≤0.005
500
Max. Tensile Load
Fiber Type
Max. Optical Power (CW)
Min. Optical Return Loss 50
0.1
-5 to +70
Package Dimensions
Operating Temperature
*Above specifications are for device without connector.
Storage Temperature
Max. PDL
Typ. PDL 0.05
5
Thermal Stability
nm
Wavelength Range
Wavelength Range
Pass
Reflect
Common
Form No.: D05-230-05 Rev.B
128
CAT-05-048C
Spec No.: CAT-05-048C Date:
Specifications
Unit
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
dB
dB
dB
dB
dB/℃
W
Max. Peak Power for ns Pulse kW
N
℃
℃
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower , ER will be 2dB lower and optical power is only 1000mW(CW).
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Ordering Information
HPMFWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ④④④: Fiber Jacket on Port 1, 2 & 3 ⑥⑥: Fiber Type
5598 - 1550nm Pass / 980nm Reflect B - 250um Bare Fiber 04B - PM 1550 for 1/3, Hi 1060 for 2
C - 900um Loose Tube(Red) 05B - PM 1550 for 1/3, PM 980 for 2
②②:Handling Power D- 900um Loose Tube(Blue) 06B - PM 1550 for 3, PM 980 for 1&2
0.5 - 500mW F- 900um Loose Tube(White)
S - Specify ⑦⑦: Package
③③③: Connector Type on Port 1, 2 & 3 01 - Ø5.5x35mm
1B - FC/UPC ⑤: Fiber Length 08 - 80*12*10
2B - FC/APC 0.8 - 0.8m
3D - SC/UPC S - Specify
4D - SC/APC
N - None
S - Specify
High Power Polarization Maintaining FWDM 980/1550nm 10W
*Above specifications are for device without connector.
Operating Temperature
Storage Temperature
-5 to +70
-40 to +85
Min. Return Loss
0.7
25
Min. Directivity(over 960~990nm)
Values
1520~1580
0.9
Parameters
Pass Band
5
10
Package Dimensions
30
960~990
0.8
0.6
PM 1550 Panda Fiber for Port 1/3, Hi 1060 Fiber for Port 2
22
20
12
15
50
60
Fiber Type
Min. Extinction Ratio
Typ. Extinction Ratio
Thermal Stability
Reflection Band
Max. Optical Power (CW)
Max. Tensile Load
≤0.005
1, 2, 3 or Specify
Pass
Common
Reflect
Form No.: D05-230-05 Rev.A
129
CAT-11-001A
Spec No.: CAT-11-001B Date:
Specifications
Unit
Wavelength Range nm 960~990 1020~1080
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
Wavelength Range nm 1020~1080 960~990
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
dB
dB
dB
dB
dB/℃
-
N
℃
℃
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*In this device,both axes is working.
*The material must be RoHS compliant.
Ordering Information
HPMFWDM-UF-①①①①-②②-③③-④④④-⑤⑤⑤-⑥-⑦⑦-⑧⑧
①①①①: Wavelength ⑥: Fiber Length
9806 - 980nm Pass / 1020~1080nm Reflect 1A - FC/UPC 0.8 - 0.8m
0698 - 1020~1080nm Pass / 980nm Reflect 2A - FC/APC(Step) S - Specify
N - None
②②: Pump Handling Power S - Specify ⑦⑦: Fiber Type
0.5- 0.5W 01A - PM 980
01 - 1W ⑤⑤⑤: Fiber Jacket on Port 1, 2 & 3 03A - Hi1060 on 980 Port,
S - Specify B - 250um Bare Fiber PM 980 on other Ports
C - 900um Loose Tube(Red)
③③: Signal Average Power D- 900um Loose Tube(Blue) ⑧⑧: Package
01 - 01W F- 900um Loose Tube(White) 01 - Ø5.5x35mm
SS - Specify S - Specify
High Power Polarization Maintaining FWDM 976/1064nm 300mW~10W (For Ultrafast)
≤0.005
④④④: Connector Type on Port 1, 2 & 3
Pulse Width: ps,fs;
Pulse Energy: nJ;
Peak Power: 0.5KW,1KW,10KW,20KW and so on.
5
PM 980 Panda Fiber
-5 to +70
-40 to +85
22
30
55
Values
0.9
0.7
25
15
50
Parameters
Pass Band
Min. Return Loss
Min. Extinction Ratio
0.7
0.5
12
Fiber Type
Signal Handling Power
Typ. Extinction Ratio
Thermal Stability
Reflection Band
Min. Directivity (over Reflection Band)
20
Package Dimensions
Max. Tensile Load
*Above specifications are for device without connector.
Operating Temperature
Storage Temperature
Pass
Common
Reflect
Form No.: D05-230-05 Rev.A
130
CAT-05-049C
Spec No.: CAT-05-049C Date:
Specifications
Unit
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
dB
dB
dB
dB
dB/℃
W
kW
N
℃
℃
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower , ER will be 2dB lower and optical power is only 1000mW(CW).
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Ordering Information
HPMFWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤: Fiber Length
9806 - 980nm Pass / 1064nm Reflect 1B - FC/UPC 0.8 - 0.8m
0698 - 1064nm Pass / 980nm Reflect 2B - FC/APC S - Specify
9803 - 980nm Pass / 1030nm Reflect 3D - SC/UPC
0398 - 1030nm Pass / 980nm Reflect 4D - SC/APC ⑥⑥: Fiber Type
N - None 01B - PM 980
②②②: Handling Power S - Specify 02 - Nufern PM 1060L
01 - 1W 03B - Hi1060 on 980 Port, PM 980 on other Ports
02 - 2W ④④④: Fiber Jacket on Port 1, 2 & 3
03 - 3W B - 250um Bare Fiber ⑦⑦: Package
S - Specify C - 900um Loose Tube(Red) 01 - Ø5.5x35mm
D- 900um Loose Tube(Blue) 08 - 80*12*10
F- 900um Loose Tube(White)
S - Specify
High Power Polarization Maintaining FWDM 976/1064nm 300mW~10W
Fiber Type
-40 to +85
Pass Band
Min. Return Loss
Min. Extinction Ratio
0.5
12
Values
960~990 (1020~1080)
Package Dimensions
Max. Peak Power for ns Pulse
Max. Tensile Load
*Above specifications are for device without connector.
Operating Temperature
Storage Temperature
Max. Optical Power (CW)
Typ. Extinction Ratio
Thermal Stability
Reflection Band
Min. Directivity (over Reflection Band)
1, 2, 3 or Specify
Parameters
15
50
25
30
1020~1080 (960~990)
0.7
0.9
0.7
5
PM 980 Panda Fiber
-5 to +70
10
20
22
55
≤0.005
Pass
Common
Reflect
Form No.: D05-230-05 Rev.A
131
CAT-05-041C
Spec No.: CAT-05-041C Date:
Unit
1270-1350 1450-1490 1500-1520 950-1010
(1530-1600) (1530-1580) (1530-1570) (1500-1600)
Typ. Insertion Loss dB 0.6 0.6 0.7 0.7
Max. Insertion Loss dB 0.8 0.8 0.9 0.9
Typ. Isolation dB 35 30 35 35
Min. Isolation at 23℃ dB 30 25 30 30
1530-1600 1530-1580 1530-1570 1500-1600
(1270-1350) (1450-1490) (1500-1520) (950-1010)
Typ. Insertion Loss dB
Max. Insertion Loss dB
Typ. Isolation dB
Min. Isolation at 23℃ dB
dB
dB
dB
dB/℃
W
kW
N
SMF-28e Fiber for pass port;HI
1060 Fiber for common and reflect
ports.
℃
℃
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower and optical power is only 1000mW(CW).
*SMF-28e Fiber is used for 1550nm interface and HI 1060 Fiber is used for 980nm channel.
Ordering Information
HPFWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤: Fiber Length
3155 - 1310nm Pass / 1550nm Reflect 1B - FC/UPC 1 - 1.0m
5531 - 1550nm Pass / 1310nm Reflect 2B - FC/APC(Step)
4855 - 1480nm Pass / 1550nm Reflect N - None ⑥⑥: Fiber Type
5548 - 1550nm Pass / 1480nm Reflect S - Specify 01 - SMF-28e
5155 - 1510nm Pass / 1550nm Reflect 05 - Pump&Common Hi1060，
5551 - 1550nm Pass / 1510nm Reflect ④④④: Fiber Jacket on Port 1, 2 & 3 Signal SMF-28e
5598 - 1550nm Pass / 980nm Reflect B - 250um Fiber S - Specify
C - 900um Loose Tube(Red)
②②: Handling Power F - 900um Loose Tube(White) ⑦⑦：Package Dimensions
05 - 5W S - Specify X - No Package
10 - 10W 01 Ø55x35
SS - Specify
-5 to +70
Specifications
Values
0.5
0.7
Parameters
Pass Band
Reflection Band
15
12
Min. Optical Return Loss
nm
*Above specifications are for device without connector.
50
0.1
≤0.005
1, 2, 3 or Specify
Max. Tensile Load
Fiber Type
Max. Optical Power (CW)
Max. Peak Power for ns Pulse
-40 to +85
nm
Wavelength Range
Wavelength Range
Package Dimensions
High Power FWDM 980/1550nm 1310/1550nm 1480/1550nm 1510/1550nm 10W
Operating Temperature
Storage Temperature
Max. PDL
Typ. PDL 0.05
5
Thermal Stability
SMF-28e Fiber for all ports
10
2
3
1
Pass
Common
Reflect
Form No.: D05-230-05 Rev.B
132
CAT-05-043B
Spec No.: CAT-05-043C Date:
Unit
1270-1350 1450-1490 1500-1520 950-1010
(1530-1600) (1530-1580) (1530-1570) (1500-1600)
Typ. Insertion Loss dB 0.6 0.6 0.7 0.7
Max. Insertion Loss dB 0.8 0.8 0.9 0.9
Typ. Isolation dB 35 30 35 35
Min. Isolation at 23℃ dB 30 25 30 30
1530-1600 1530-1580 1530-1570 1500-1600
(1270-1350) (1450-1490) (1500-1520) (950-1010)
Typ. Insertion Loss dB
Max. Insertion Loss dB
Typ. Isolation dB
Min. Isolation at 23℃ dB
dB
dB
dB
dB/℃
W
kW
N
℃
℃
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower and optical power is only 1000mW(CW).
*SMF-28e Fiber is used for 1550nm interface and HI 1060 Fiber is used for 980nm channel.
*The material must be RoHS compliant.
Ordering Information
HPFWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤: Fiber Length
3155 - 1310nm Pass / 1550nm Reflect 1A - FC/UPC 1 - 1.0m
5531 - 1550nm Pass / 1310nm Reflect 2A - FC/APC(Step) S - Specify
4855 - 1480nm Pass / 1550nm Reflect 3A - SC/UPC
5548 - 1550nm Pass / 1480nm Reflect N - None ⑥⑥: Fiber Type
5155 - 1510nm Pass / 1550nm Reflect S - Specify 01 - SMF-28e
5551 - 1550nm Pass / 1510nm Reflect 05 - Pump&Common Hi1060，
9855 - 980nm Pass / 1550nm Reflect ④④④: Fiber Jacket on Port 1, 2 & 3 Signal SMF-28e
5598 - 1550nm Pass / 980nm Reflect B - 250um Fiber S - Specify
C - 900um Loose Tube(Red)
②②: Handling Power F - 900um Loose Tube(White) ⑦⑦：Package Dimensions
01 - 01W S - Specify 01 Ø55x35
SS - Specify
High Power FWDM 980/1550nm 1310/1550nm 1480/1550nm 1510/1550nm 10W
Specifications
Values
0.5
0.7
Parameters
Pass Band
Reflection Band
15
12
nm
*Above specifications are for device without connector.
50
0.1
≤0.005
1, 2, 3 or Specify
Max. Tensile Load
Fiber Type
Max. Optical Power (CW)
-5 to +70
-40 to +85
nm
Wavelength Range
Wavelength Range
Package Dimensions
Min. Optical Return Loss
Operating Temperature
Storage Temperature
Max. PDL
Typ. PDL 0.05
5
Thermal Stability
Max. Peak Power for ns Pulse 10
SM Fiber
2
Pass
Common
Reflect
Form No.: D05-230-05 Rev.A
133
CAT-04-012C
\\
Spec No.: CAT-04-012C Date:
Specifications
Unit
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Typ. Isolation dB
Min. Isolation dB
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Typ. Isolation dB
Min. Isolation dB
dB
dB
dB
dB/℃
mW
N
℃
℃
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower.
*The material must be RoHS compliant.
Ordering Information
FWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤: Fiber Length
9806 - 980 Pass/1064 Reflect 1B - FC/UPC 0.8 - 0.8m
9803 - 980 Pass/1030 Reflect 2B - FC/APC S - Specify
N - None
②②: Handling Power S - Specify ⑥⑥: Fiber Type
0.3 - 300mW 02 - HI1060
S - Specify ④④④: Fiber Jacket on Port 1, 2 & 3 10 - Nufern 1060-XP
B - 250um Bare Fiber
F- 900um Loose Tube(White) ⑦⑦: Package
S - Specify 01 - Ø5.5x35mm
-5 to +70
50
0.1
0.05
≤0.005
FWDM 976/1064nm 300mW
Values
0.5
0.7
5
HI 1060 fiber
-40 to +85
300
Parameters
Pass Band
Reflection Band
Optical Return Loss
0.3
0.5
15
13
Max. PDL
960-990
Package Dimensions
30
25
1020-1080
*Above specifications are for device without connector.
Thermal Stability
Max. Optical Power (CW)
Typ. PDL
Max. Tensile Load
Fiber Type
Operating Temperature
Storage Temperature
1
Pass
Reflect
Common
Form No.: D05-230-05 Rev.B
134
CAT-05-042C
Spec No.: CAT-05-042C Date:
Specifications
Unit
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Typ. Isolation dB
Min. Isolation dB
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Typ. Isolation dB
Min. Isolation dB
dB
dB
dB
dB/℃
W
Max. Peak Power for ns Pulse kW
N
℃
℃
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower and optical power is only 1000mW(CW).
Ordering Information
HPFWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ④④④: Fiber Jacket on Port 1, 2 & 3 ⑥⑥: Fiber Type
9806 - 980 Pass/1064 Reflect B - 250um Fiber 02 - HI1060
C - 900um Loose Tube(Red) S - Specify
②②: Handling Power F - 900um Loose Tube(White)
01 - 1W S - Specify ⑦⑦：Package Dimensions
SS - Specify 01 - Ø55x35
⑤: Fiber Length
③③③: Connector Type on Port 1, 2 & 3 1 - 1.0m
1A - FC/UPC S - Specify
2A - FC/APC(Step)
N - None
S - Specify
High Power FWDM 976/1064nm 10W
10
15
13
5
HI 1060 fiber
-5 to +70
50
0.1
0.05
≤0.005
1, 2, 3 or Specify
Parameters
Pass Band
Reflection Band
Optical Return Loss
Values
960-990
0.7
0.9
0.5
Max. PDL
0.7
Package Dimensions
Typ. PDL
Thermal Stability
Max. Optical Power (CW)
30
25
1020-1080
*Above specifications are for device without connector.
-40 to +85
Max. Tensile Load
Fiber Type
Operating Temperature
Storage Temperature
1
Pass
Common
Reflect
Form No.: D05-230-05 Rev.B
135
CAT-09-024C
Spec No.: CAT-09-024D Date:
Specifications
Unit
Wavelength Range nm 1270-1350(1530-1600) 1450-1490(1530-1600) 1500-1520(1530-1570)
Typ. Insertion Loss dB 0.4 0.4 0.5
Max. Insertion Loss dB 0.6 0.6 0.7
Typ. Isolation dB 30 30 30
Min. Isolation dB 25 25 25
Wavelength Range nm 1530-1600(1270-1350) 1530-1600(1450-1490) 1530-1570(1500-1520)
Typ. Insertion Loss dB
Max. Insertion Loss dB
Typ. Isolation dB
Min. Isolation dB
Min. Extinction Ratio dB
dB
dB/℃
mW
N
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMFWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤: Fiber Length
3155 - 1310nm Pass / 1550nm Reflect 1A - FC/UPC 1 - 1.0m
5531 - 1550nm Pass / 1310nm Reflect 2A - FC/APC S - Specify
4855 - 1480nm Pass / 1550nm Reflect 3D - SC/UPC
5548 - 1550nm Pass / 1480nm Reflect 4D - SC/APC ⑥⑥: Fiber Type
5155 - 1510nm Pass / 1550nm Reflect N - None 09A - PM1550
5551 - 1550nm Pass / 1510nm Reflect S - Specify
⑦⑦: Package
②②:Handling Power ④④④: Fiber Jacket on Port 1, 2 & 3 01 - Ø55x35mm
Polarization Maintaining FWDM 1310/1550nm 1480/1550nm 1510/1550nm 300mW
Reflect Band
Pass Band
Parameters
0.3
0.5
15
≤0.005
12
50
-5 to +70
Min. Return Loss
Values
20
-40 to +85
Fiber Type PM 1550 Panda Fiber
Storage Temperature
Thermal Stability
Max. Optical Power (CW) 500
Max. Tensile Load
Operating Temperature
5
2
3
Pass
Reflect
Common
Form No.: D05-230-05 Rev.B
136
CAT-05-047C
Spec No.: CAT-05-047C Date:
Unit
Wavelength Range nm 1270-1350(1530-1600) 1450-1490(1530-1600) 1500-1520(1530-1570)
Typ. Insertion Loss dB 0.6 0.6 0.7
Max. Insertion Loss dB 0.8 0.8 0.9
Typ. Isolation dB 30 30 30
Min. Isolation dB 25 25 25
Wavelength Range nm 1530-1600(1270-1350) 1530-1600(1450-1490) 1530-1570(1500-1520)
Typ. Insertion Loss dB
Max. Insertion Loss dB
Typ. Isolation dB
Min. Isolation dB
Min. Extinction Ratio dB
dB
dB/℃
W
kW
N
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower , ER will be 2dB lower and optical power is only 1000mW(CW).
*The PM fiber and the key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMFWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ⑤: Fiber Length
3155 - 1310nm Pass / 1550nm Reflect 1A - FC/UPC 0.8 - 0.8m
5531 - 1550nm Pass / 1310nm Reflect 2A - FC/APC S - Specify
4855 - 1480nm Pass / 1550nm Reflect 3D - SC/UPC
5548 - 1550nm Pass / 1480nm Reflect 4D - SC/APC ⑥⑥: Fiber Type
5155 - 1510nm Pass / 1550nm Reflect N - None 09A - PM 1550
5551 - 1550nm Pass / 1510nm Reflect S - Specify 22A - PM 1550 for 1/3, SMF-28e for Reflect
23A - PM 1310
②②: Handling Power ④④④: Fiber Jacket on Port 1, 2 & 3
01 - 1W B - 250um Bare Fiber ⑦⑦: Package
SS - Specify C - 900um Loose Tube(Red) 01 - Ø5.5x35mm
D - 900um Loose Tube(Blue) 08 - 80*12*10
F - 900um Loose Tube(White)
S - Specify
Operating Temperature
-40 to +85
5
Max. Peak Power for ns Pulse
-5 to +70
High Power Polarization Maintaining FWDM 1310/1550nm 1480/1550nm 1510/1550nm 10W
15
12
50
Fiber Type
③③③: Connector Type on Port 1, 2 & 3
Reflection Band
Min. Return Loss
Storage Temperature
Thermal Stability
Max. Optical Power (CW)
Max. Tensile Load
0.5
0.7
PM Panda Fiber
10
20
≤0.005
1, 2, 3 or Specify
Values
Specifications
Pass Band
Parameters
Pass
Common
Reflect
Form No.: D05-230-05 Rev.A
137
CAT-10-016E
Spec No.: CAT-10-016E
Specifications
Unit
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
Wavelength Range nm
Max. Insertion Loss dB 0.6
Typ. Insertion Loss dB 0.4
Min. Isolation dB
Typ. Isolation dB
dB
dB
dB
dB
dB/℃
mW
N
PM 1550 Fiber , PM 1950 Fiber for
All Ports
℃
℃
*For devices with connectors, IL will be 0.3dB higher, ER will be 2dB lower and RL will be 5dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
PMFWDM-①①①①-②②-③③-④④④-⑤⑤-⑥⑥-⑦
①①①①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤⑤: Fiber Length
2057 - 2000nm Pass / 1570nm Reflect 1A - FC/UPC 0.8 - 0.8m
SSSS - Specify 2A - FC/APC（Step） S - Specify
N - None
②②: Handling Power S - Specify ⑥⑥: Fiber Type
0.5 - 0.5W 09A - PM 1550 Fiber
SS - Specify ④④④: Fiber Jacket on Port 1, 2 & 3 20 - Nufern PM1950
B - 250um Bare Fiber 21A - PM 1550 Fiber at Common & Reflect
C - 900um Loose Tube(Red) ports and PM 1950 Fiber at Pass port
F - 900um Loose Tube(White) 37 - PM 1950 for Common & Pass,
S - Specify PM 1550 for Reflect
⑦: Package Size
01 - Ø55x35
Polarization Maintaining FWDM 1570/2000nm 300mW
*Above specifications are for device without connector.
30
Max. Tensile Load
Fiber Type
Min. Directivity(over 1550~1590nm)
25
Parameters
Pass Band
Reflection Band
Package Dimensions
Thermal Stability
Min. Return Loss
Values
1950~2050
0.8
0.6
20
1550~1590
1.2
1
Date:
Operating Temperature
Storage Temperature
Min. Extinction Ratio
Typ. Extinction Ratio
12
15
50
≤0.005
Max. Optical Power (CW)
-40 to +85
500
5
-5 to +70
55
18
PM 1950 for Common & Pass, PM 1550
for Reflect
1
Pass
Common
Reflect
Form No.: D05-230-05 Rev.B
138
CAT-10-012D
Spec No.: CAT-10-012D Date:
Specifications
Unit
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
dB
dB
dB
dB
dB/℃
mW
N
℃
℃
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
Ordering Information
FWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ④④④: Fiber Jacket on Port 1, 2 & 3 ⑥⑥: Fiber Type
2057 - 2000nm Pass / 1570nm Reflect B - 250um Bare Fiber 01 - SMF-28e Fiber (all ports)
SSSS - Specify F - 900um Loose Tube(White) 11 - SMF-28e Fiber at Common & Reflect ports
S - Specify and SM 1950 Fiber at Pass port
②②: Handling Power S - Specify
0.5 - 500mW ⑤: Fiber Length
0.8 - 0.8m ⑦⑦:Package
③③③: Connector Type on Port 1, 2 & 3 S - Specify 01 - Ø55*35mm
1A - FC/UPC
2A - FC/APC (Step)
N - None
S - Specify
FWDM 1570/2000nm 300mW
-5 to +70
0.1
0.05
≤0.005
500
5
SMF-28e Fiber or Specify
0.6
0.4
Storage Temperature -40 to +85
Operating Temperature
Min. Directivity(over 1550~1590nm)
Max. Optical Power (CW)
1950~2050
0.8
0.6
25
30
12
Parameters
Pass Band
Min. Return Loss
Reflection Band
Package Dimensions
*Above specifications are for device without connector.
Values
Max. Tensile Load
Fiber Type
Max. PDL
Typ. PDL
Thermal Stability
1550~1590
15
50
55
1
Pass
Common
Reflect
Form No.: D05-230-05 Rev.B
139
CAT-05-060C
Spec No.: CAT-05-060C Date:
Specifications
Unit
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
dB
dB
dB
dB
dB/℃
W
N
℃
℃
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER will be 2dB lower, optical power is only 1W.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Ordering Information
HPMFWDM-①①①①-②②-③③-④④④-⑤⑤-⑥⑥-⑦
①①①①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤⑤: Fiber Length
2057 - 2000nm Pass / 1570nm Reflect 1A - FC/UPC 0.8 - 0.8m
SSSS - Specify 2A - FC/APC S - Specify
3D - SC/UPC
②②: Handling Power 4D - SC/APC ⑥⑥: Fiber Type
01 - 1W N - None 09A - PM 1550 Fiber
SS - Specify S - Specify 20 - Nufern PM1950
31 - PM1950 Fiber at Common & Reflect
④④④: Fiber Jacket on Port 1, 2 & 3 ports and PM1550 Fiber at Pass port
B - 250um Bare Fiber
C - 900um Loose Tube(Red) ⑦: Package Size
F - 900um Loose Tube(White) 01 - Ø55x35
S - Specify 08 - 80*12*10
High Power Polarization Maintaining FWDM 1570/2000nm 10W
Parameters
Pass Band
Reflection Band
Min. Return Loss
Package Dimensions
Max. Tensile Load
Min. Directivity(over 1550~1590nm)
*Above specifications are for device without connector.
Operating Temperature
Storage Temperature
Min. Extinction Ratio
Typ. Extinction Ratio
Thermal Stability
Fiber Type
Max. Optical Power (CW)
Values
1950~2050
25
30
1.0
0.8
1550~1590
12
15
50
0.8
0.6
55
18
20
≤0.005
-40 to +85
1, 3, 5 or Specify
5
PM 1550 Fiber, PM 1950 Fiber or Specify
-5 to +70
Height:10
Unit:mm
3
Pass 1
Common
2
Reflect
Package for 6～10W
1
2
3
Common
Reflect
Package for 1～5W
Pass
Form No.: D05-230-05 Rev.A
140
CAT-05-056C
Spec No.: CAT-05-056C Date:
Specifications
Unit
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
Wavelength Range nm
Max. Insertion Loss dB
Typ. Insertion Loss dB
Min. Isolation dB
Typ. Isolation dB
dB
dB
dB
dB
dB/℃
W
N
℃
℃
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, optical power is only 1W.
*The material must be RoHS compliant.
Ordering Information
HPFWDM-①①①①-②②-③③③-④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤: Fiber Length
2055 - 2000nm Pass / 1550nm Reflect 1B - FC/UPC 1 - 1.0m
SSSS - Specify 2B - FC/APC(Step) S - Specify
N - None
②②: Handling Power S - Specify ⑥⑥: Fiber Type
01 - 1W 12 - SM1950 Fiber
SS - Specify ④④④: Fiber Jacket on Port 1, 2 & 3 24 - SM1950 at Common/Reflect ports
B - 250um Fiber and SM 1950 Fiber at Pass port
F - 900um Loose Tube(White)
S - Specify ⑦⑦：Package Dimensions
01 - Ø5.5x35
08 - 80*12*10
High Power FWDM 1570/2000nm 10W
1550~1590
0.1
0.05
≤0.005
55
50
12
30
Parameters
-40 to +85
-5 to +70
SMF-28e Fiber, SM 1950 Fiber or Specify
0.7
0.5
5
1, 3, 5 or Specify
15
Pass Band
Values
1950~2050
25
0.7
0.9
Reflection Band
Min. Return Loss
Min. Directivity(over 1550~1590nm)
Max. Tensile Load
Max. Optical Power (CW)
Fiber Type
Max. PDL
Typ. PDL
Thermal Stability
*Above specifications are for device without connector.
Operating Temperature
Storage Temperature
Package Dimensions
Height:10
Unit:mm
3
Pass 1
Common
2
Reflect
Package for 6～10W
1
2
3
Common
Reflect
Package for 1～5W
Pass
Form No.: D05-230-05 Rev.B
141
CAT-03-008F
Spec No.: CAT-03-008F Date:
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Min. Isolation dB
Max. Insertion Loss dB
Max. PDL dB
Min. Return Loss dB
Min. Directivity dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Thermal Stability dB/℃
Operating Temperature ℃
Storage Temperature ℃
Fiber Type -
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
WDM-①①①①-②-③③③③-④④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ④④④④: Fiber Jacket ⑥⑥:Fiber Type
9855 - 980 & 1550nm B -250um Bare Fiber 20 - HI1060 Flex Fiber
C - 900um Loose Tube(Red) 1E - HI1060 Fiber
②: Port D - 900um Loose Tube(Blue)
1 - 1X2 E - 900um Loose Tube(Black) ⑦⑦:Package Dimensions
2 - 2X2 F - 900um Loose Tube(White) 14 - Ø3.0x40
T - 3mm松套管(黄色) 16 - Ø3.0x56
③③③③: Connector Type 29 - 90x16x9
1B - FC/UPC ⑤: Fiber Length
2B - FC/APC 1 - 1m
3B - SC/UPC S - Specify
4B - SC/APC
N - None
S - Specify
0.25
0.1
50
50
3mm Loose Cable 90X16X9
≤ 0.002 over -5℃ to +70℃
-5 to +70
-40 to +85
HI1060 Flex Fiber or HI1060 Fiber
5
900um Loose Tube Ø3.0X56
WDM 980/1550nm 300mW~10W
Values
980&1550
±15
250um Bare Fiber Ø3.0X40
500
Package Dimensions mm
Specifications
20
1
;
(Black) for 900um Loose Tube;
,
.
3
1
.
(Clear) for 250um Bare Fiber,
;
1;
.
:
Form No.: D05-230-05 Rev.A
142
CAT-03-010D
Spec No.: CAT-03-010D Date:
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Min. Isolation dB
Max. Insertion Loss dB
Max. PDL dB
Min. Return Loss dB
Min. Directivity dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Thermal Stability dB/℃
Operating Temperature °C
Storage Temperature °C
Fiber Type -
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
WDM-①①①①-②-③③③③-④④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ④④④④: Fiber Jacket ⑥⑥:Fiber Type
9806 - 980 & 1060nm B -250um Bare Fiber 20 - HI1060 Flex Fiber
C - 900um Loose Tube(Red) 1E - HI1060 Fiber
②: Port Configuration D - 900um Loose Tube(Blue)
1 - 1X2 E - 900um Loose Tube(Black) ⑦⑦:Package Dimensions
2 - 2X2 F - 900um Loose Tube(White) 13 - Ø3.0x54
T - 3mm松套管(黄色) 77 - Ø3.0x75
③③③③: Connector Type 29 - 90x16x9
1B - FC/UPC ⑤: Fiber Length
2B - FC/APC 1 - 1m
3B - SC/UPC S - Specify
4B - SC/APC
N - None
S - Specify
15
250um Bare Fiber Ø3.0X54
WDM 976/1064nm 300mW~10W
50
50
mm
Specifications
Package Dimensions
Values
980&1060
±5
-5 to +70
0.35
0.15
3mm Loose Cable 90X16X9
900um Loose Tube Ø3.0X75
500
5
≤ 0.002 over -5 °C to +70 °C
-40 to +85
HI1060 Flex Fiber or HI1060 Fiber
1.
;
,
.
3
1
;
;
;
.
1
Form No.: D05-230-05 Rev.A
143
CAT-03-007E
Spec No.: CAT-03-007E Date:
Parameters Unit
Center Wavelength 1310&1550 1310&1550
Bandwidth nm ±10 ±15
Min. Isolation dB 20 17
Max. Insertion Loss dB 0.3 0.3
Max. PDL dB 0.15 0.15
Min. Directivity dB 55 55
Max. Optical Power (CW) mW
Max. Tensile Load N
Thermal Stability dB/℃
Operating Temperature ℃
Storage Temperature ℃
Fiber Type -
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
WDM-①①①①-②-③③③③-④④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ④④④④: Fiber Jacket ⑥⑥:Fiber Type
3155 - 1310 & 1550nm B -250um Bare Fiber 09 - SMF-28e Fiber
C - 900um Loose Tube(Red)
②: Port D - 900um Loose Tube(Blue) ⑦⑦:Package Dimensions
1 - 1X2 E - 900um Loose Tube(Black) 14 - Ø3.0x40
2 - 2X2 F - 900um Loose Tube(White) 16 - Ø3.0x56
T - 3mm松套管(黄色) 29 - 90x16x9
③③③③: Connector Type
1B - FC/UPC ⑤: Fiber Length
2B - FC/APC 1 - 1m
3B - SC/UPC S - Specify
4B - SC/APC
N - None
S - Specify
-40 to +85
WDM 1310/1550nm 300mW~10W
Values
Specifications
-5 to +70
500
5
≤ 0.002 over -5℃ to +70℃
Package Dimensions mm
250um Bare Fiber Ø3.0X40
900um Loose Tube Ø3.0X56
3mm Loose Cable 90X16X9
SMF-28e Fiber
.
1
,
.
3
1
;
.
Form No.: D05-230-05 Rev.A
144
CAT-03-013C
Spec No.: CAT-03-013C Date:
Parameters Unit
Center Wavelength nm 1490/1550 1480/1550 1480/1590
Operating Wavelength Range nm ±5 ±5 ±5
Min. Isolation dB 11 13 15
Max. Insertion Loss dB 0.55 0.4 0.4
Max. PDL dB 0.15 0.15 0.15
Min.Return Loss dB 50 50 50
Min.Directivity dB 50 50 50
Max. Optical Power (CW) mW
Max. Tensile Load N
Thermal Stability dB/℃
Operating Temperature °C
Storage Temperature °C
Fiber Type
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
WDM-①①①①-②-③③③③-④④④④-⑤-⑥⑥-⑦⑦
①①①①: Wavelength ④④④④: Fiber Jacket ⑥⑥:Fiber Type
4955 - 1490/1550 B -250um Bare Fiber 09 - SMF-28e Fiber
4855 - 1480/1550 C - 900um Loose Tube(Red)
4859 - 1480/1590 D - 900um Loose Tube(Blue) ⑦⑦:Package Dimensions
E - 900um Loose Tube(Black) 13 - Ø3.0x55
②: Port F - 900um Loose Tube(White) 77 - Ø3.0x75
1 - 1X2 T - 3mm松套管(黄色) 29 - 90x16x9
2 - 2X2
⑤: Fiber Length
③③③③: Connector Type 1 - 1m
1B - FC/UPC S-Specify
2B - FC/APC
3B - SC/UPC
4B - SC/APC
N - None
S - Specify
WDM 1480/1550nm 300mW~10W
-5 to +70
-40 to +85
Values
Specifications
500
5
250um Bare Fiber Ø3.0X55
900um Loose Tube Ø3.0X75
3mm Loose Cable 90X16X9
Package Dimensions mm
≤ 0.002 over -5 °C to +70 °C
SMF-28e Fiber
;
1(Black) for 900um Loose Tube;
,
.
;
) Port 2(Blue) Port 3(White) Port 4(Black) for 900um Loose Tube;
.
:
Form No.: D05-230-05 Rev.A
145
Spec Review No.: SR0712014D Date: Oct. 9, 2023
Specifications
Unit
nm
dB
nm
dB
dB
dB
dB
mW
N
--
℃
℃
*Above specification are for devices without connector.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower, ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMBPF-①①①①-②②-③③-④④-⑤-⑥⑥-⑦⑦-⑧-⑨⑨-⑩⑩
①①①①: Center Wavelength ⑤: Axis Alignment ⑦⑦: Fiber Jacket on Port 1, 2
9806- 960~990nm/1020～1100nm F - Fast Axis Blocked B - 250um Bare Fiber
SSSS - Specify B - Both Axis Working C - 900um Loose Tube(Red)
D - 900um Loose Tube(Blue )
②②: Pass Band Width ⑥⑥: Connector Type on Port 1, 2 E - 900um Loose Tube(Black )
30 - 30nm 1B - FC/UPC SS - Specify
SS - Specify 2B - FC/APC (Step)
3D - SC/UPC ⑧: Fiber Length
③③: Stop Band Width 4D - SC/APC (Step) 0.8 - 0.8 m
80 - 80nm SS - Specify S - Specify
SS - Specify N - None
⑨⑨:Fiber Type
④④: Handing Power 02B -PM980 Fiber
0.5 - 500mW
SS - Specify ⑩⑩ Package Type
01 - Ø5.5x35
Storage Temperature
Max. Insertion Loss over 960~990nm
Stop Band
Min. Stop Band Isolation
Min. Extinction Ratio (only for F-Type)@23 ℃
Min. Optical Return Loss
Max. Optical Power(CW,SOP)
Polarization Maintaining Band Pass Filter 980nm 300mW
-40 to +85
Values
980
0.8
1020~1100
30
22
Parameters
Max. Tensile Load
-5 to +70
Nominal Center Wavelength
50
500
5
20
PM 980 Panda Fiber
Min. Extinction Ratio (only for B-Type)@23 ℃
Fiber Type
Operating Temperature
Form No.:D05-203-05 Rev.B
146
Spec Review No.: SR2305042A Date: May.12, 2023
Unit
nm
nm
nm
dB
dB
dB
Min. Extinction Ratio (only for B-Type) dB
dB
dB
W
N
-
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower, ER will be 2dB lower and optical power is only 1000mW.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMBPF-①①①-②②-③③-④-⑤-⑥⑥-⑦⑦-⑧-⑨⑨-⑩⑩
①①: Center Wavelength ⑤: Axis Alignment ⑦⑦: Fiber Jacket on Port 1, 2
980 - 980nm F - Fast Axis Blocked B - Bare Fiber
SS - Specify B - Both Axis Working C - 900um Loose Tube(Red)
D - 900um Loose Tube(Blue )
②②: Pass Band Width ⑥⑥: Connector Type on Port 1, 2 E - 900um Loose Tube(Black )
04 - 4nm 1A - FC/UPC S - Specify
SS - Specify 2A - FC/APC
3D - SC/UPC ⑧: Fiber Length
③③: Stop Band Width 4D - SC/APC 0.8 - 0.8 m
12 - 12nm S - Specify S - Specify
SS - Specify N - None
⑨⑨:Fiber Type
④:Handling Power 02A -PM980 Fiber
01 - 1W
S - Specify ⑩⑩ Package Type
01 - Ø5.5x35
Specifications
High Power Polarization Maintaining Band Pass Filter 980nm 300mW
Parameters
Operating Wavelength Range
Nominal Center Wavelength(CWL)
Min. Pass Band Width @0.5dB
Values
980
-40 to +85
-5 to +70
PM 980 Panada Fiber
800~1300
20
Max. Stop Band width @25dB
Typ. Insertion Loss @980±2nm
5
1
50
1.0
4.0
1.3
22
12
Max. Insertion Loss @980±2nm
Min. Extinction Ratio (only for F-Type)
Operating Temperature
Storage Temperature
Min. Optical Return Loss
Max. Optical Power(CW)
Max. Tensile Load
Fiber Type
Form No.:D05-203-05 Rev.B
147
Band Pass Filter 980nm 300mW
Spec Review No.: SR2303059B Date:Apr.23, 2023
Unit
nm
dB
nm
dB
dB
dB
mW
N
--
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
BPF-①①①①-②②-③③-④④-⑤⑤-⑥⑥-⑦-⑧⑧-⑨⑨
①①①①: Center Wavelength ⑤⑤: Connector Type on Port1,2 ⑦: Fiber Length
9806- 960~990nm/1020～1100nm 1B - FC/UPC 0.8 - 0.8 m
2B - FC/APC S - Specify
②②: Pass Band Width 3B - SC/UPC
30 - 30nm 4B - SC/APC ⑧⑧:Fiber Type
SS - Specify N - None 01 - HI-1060 Fiber
③③: Stop Band Width ⑥⑥: Fiber Jacket on Port 1,2 ⑨⑨: Package Type
80 - 80nm B - 250um Bare Fiber 01 - Ø5.5x35
SS - Specify F - 900um Loose Tube(White)
G - 900um Loose Tube(Yellow)
④④: Handing Power E - 900um Loose Tube(Black)
0.5 - 500mW S - Specify
S - Specify
Specifications
Values
980
0.8
Parameters
Nominal Center Wavelength
Max. Insertion Loss over 960~990nm
1020～1100
30
0.1
50
-40 to +85
500
5
Corning HI 1060 Fiber
-5 to +70
Stop Band
Min. Stop Band Isolation
Max. PDL
Min. Optical Return Loss
Storage Temperature
Max. Optical Power(CW)
Max. Tensile Load
Fiber Type
Operating Temperature
Form No.:D05-203-05 Rev.B
148
