该页无缩略图
Spec Review No.:SR2306105A Date: Jun. 27, 2023
Unit
nm
dB
nm
dB
dB
W
N
--
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.2dB higher, RL will be 20dB lower，optical power is only 2W.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
MMBPF-①①①①-②②-③③-④-⑤⑤-⑥⑥-⑦-⑧⑧-⑨⑨
①①①①: Wavelength
9706- 960~990nm/1020～1120nm ⑤⑤: Connector Type on Port 1, 2 ⑦: Fiber Length
SSSS - Specify 1B - FC/UPC 0.8 - 0.8m
2B - FC/APC (Step) S - Specify
②②: Pass Band Width 3D - SC/UPC
30 - 30nm(960~990nm) 4D - SC/APC (Step) ⑧⑧:Fiber Type
SS - Specify N - None 04 - MM Fiber 105/125.NA0.22
S - Specify S - Specify
③③: Stop Band Width
100 - 100nm(1020~1120nm) ⑥⑥: Fiber Jacket on Port 1, 2 ⑨⑨ Package Type
SS - Specify B - 250um Fiber 08 - 80*12*10
E - 900um Loose Tube(Black)
④:Handling Power H - 900um Loose Tube(Green)
30 - 30W S - Specify
S - Specify
Multi-Mode Band Pass Filter 980nm 10W
Max. Tensile Load
Fiber Type
Operating Temperature
Storage Temperature
-5 to +70
-40 to +85
5
MMF105/125,NA.0.22
30
Parameters
Pass Band Wavelength Range
Max. Insertion Loss over 960~990nm
Stop Band Wavelength Range
Min. Stop Band Isolation
Specifications
Values
960~990
Max. Optical Power (CW,Only for 960~990nm)
30
30
Min. Optical Return Loss
0.6
1020-1120
Input Output
Form NO. D05-203-05 Rev.B
149
Spec Review No.: SR2301721A Date: Apr.23, 2023
Parameters Unit
Nominal Center Wavelength nm
Max. Insertion Loss over CWL+/-1.0nm dB
Min. Pass Band Width @0.5dB nm
Max. Stop Band Width @25dB nm
Min. Extinction Ratio (only for F-Type)@23℃ dB
Min. Extinction Ratio (only for B-Type)@23℃ dB
Min. Optical Return Loss dB
Max. Optical Power(CW) mW
Max. Tensile Load N
Fiber Type --
Operating Temperature ℃
Storage Temperature ℃
*For devices with connectors, IL will be 0.5dB higher, ER will be 2dB lower and RL will be 5dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMBPF-①①①①-②②-③③-④-⑤-⑥⑥-⑦⑦-⑧-⑨⑨-⑩⑩
①①①①: Center Wavelength ⑤: Axis Alignment⑦⑦: Fiber Jacket on Port 1, 2
1030 - 1030 nm F - Fast Axis Blocked B - Bare Fiber
SSSS - Specify B - Both Axis Working C - 900um Loose Tube(Red)
D - 900um Loose Tube(Blue )
②②: Pass Band Width ⑥⑥: Connector Type on Port 1, 2 E - 900um Loose Tube(Black )
02 - 2.0 nm 1B - FC/UPC S - Specify
SS - Specify 2B - FC/APC
3B - SC/UPC ⑧: Fiber Length
③③: Stop Band Width 4B - SC/APC 0.8 - 0.8 m
08 - 8 nm S - Specify S - Specify
SS - Specify N - None
⑨⑨:Fiber Type
④:Handling Power 02B - PM980 Fiber
0.3 - 300mW
S - Specify⑩⑩ Package Type
01 - Ø5.5x35
Polarization Maintaining Band Pass Filter 1030nm 300mW
300
5
*Above specifications are for device without connector.
PM 980 Panda Fiber
50
2.0
20
Specifications
Values
1030
1.2
8.0
22
-5 to +70
-40 to +85
1
Form No.:D05-203-05 Rev.B
150
Spec Review No.: SR1409012B Date: Apr.21, 2023
Parameters Unit
Nominal Center Wavelength nm
Max. Insertion Loss dB
Min. Pass Bandwidth @0.5dB nm
Max. Stop Bandwidth @20dB nm
Max. PDL dB
Min. Optical Return Loss dB
Max. Optical Power(CW) mW
Max. Tensile Load N
Fiber Type --
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
BPF-①①①①-②②-③③-④④-⑤⑤-⑥⑥-⑦-⑧⑧-⑨⑨
①①①①: Center Wavelength ⑤⑤: Connector Type on Port1,2 ⑦: Fiber Length
1030 - 1030nm 1B - FC/UPC 0.8 - 0.8 m
SSSS - Specify 2B - FC/APC S - Specify
3B - SC/UPC
②②: Pass Band Width 4B - SC/APC ⑧⑧:Fiber Type
04 - 4nm N - None 01 - HI-1060 Fiber
SS - Specify
⑥⑥: Fiber Jacket on Port 1,2 ⑨⑨: Package Type
③③: Stop Band Width B - 250um Bare Fiber 01 - Ø5.5x35
06 - 6nm F - 900um Loose Tube(White)
SS - Specify S - Specify
④④: Handing Power
0.3 - 300mW
S - Specify
Specifications
300
5
Band Pass Filter 1030nm 300mW
Values
1030
1.0
6
0.1
-40 to +85
-5 to +70
4
Corning HI 1060 Fiber
50
Form No.:D05-203-05 Rev.B
151
Spec Review No.: SR2401054A Date: Jan. 25, 2024
Unit
nm
dB
nm
nm
Min. ER (only for Fast Axis Blocked Type) dB
Min. ER (only for Both Axis Working Type) dB
Min. Optical Return Loss (only for Port 1、Port 2) dB
W
N
--
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher, ER will be 2dB lower, RL will be 5dB lower, optical power is only 1W.
*The PM fiber and the connector key are aligned to the slow axis.
*Port 3 is for guiding the rejected light out, please be careful when handling.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMBPF-①①①①-②②-③③-④④-⑤-⑥⑥⑥-⑦⑦⑦-⑧-⑨⑨-⑩⑩
①①①①: Center Wavelength ⑤: Axis Alignment ⑦⑦⑦: Fiber Jacket
1030 - 1030nm F - Fast Axis Blocked B - Bare Fiber
B - Both Axis Working C - 900um Loose Tube(Red)
②②: Pass Band Width D - 900um Loose Tube(Blue )
04 - 4 nm ⑥⑥⑥: Connector Type E - 900um Loose Tube(Black )
SS - Specify 1B - FC/UPC SSS - Specify
2B - FC/APC (Step)
③③: Stop Band Width 3D - SC/UPC ⑧: Fiber Length
08 - 8 nm 4D - SC/APC (Step) 0.8 - 0.8 m
SS - Specify N - None S - Specify
SSS - Specify
④④: Handling Power ⑨⑨:Fiber Type
05 - 5W
⑩⑩ Package Type
01 - Ø5.5x35
Specifications
18
18 - PLMA-GDF-14/125-UF NA0.07 for Port 1、2
MM 105/125 Fiber for Port 3
Max. Optical Power (CW,Proper SOP for F type)
Max. Tensile Load
Nominal Center Wavelength (λc)
Max. Stop Band Width @25dB
Max. Insertion Loss over λc (1→2)
20
1030
0.9
4
8
Pass Band Width @0.5dB
High Power Polarization Maintaining Band Pass Filter 1030nm 10W
Fiber Type
-5 to +70
-40 to +85
PLMA-GDF-14/125-UF NA0.07 for Port 1、2
MM 105/125 Fiber for Port 3
50
5
5
Parameters Values
Input
Reject
Output
Form No.:D05-203-05 Rev.B
152
Spec Review No.: SR2307043A Date: Jul. 13, 2023
Unit
nm
nm
nm
dB
dB
dB
dB
--
N
--
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower and handling power is only 1W.
*Port 2 is for rejected light dumping or monitoring, please be careful when handling.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPBPF-①①①①-②②-③③-④④-⑤⑤⑤-⑥⑥⑥-⑦-⑧⑧-⑨⑨
①①①①: Center Wavelength ⑤⑤⑤: Connector Type on port 1, 2 & 3 ⑦: Fiber Length
1064 - 1064nm 1B - FC/UPC 0.8 - 0.8 m
SSSS - Specify 2B - FC/APC (Step) S - Specify
3D - SC/UPC
②②: Pass Band Width 4D - SC/APC (Step) ⑧⑧: Fiber Type
02 - 2nm N - None 01 - HI 1060 Fiber
SS - Specify SSS - Specify SS - Specify
③③: Stop Band Width ⑥⑥⑥: Fiber Jacket for port 1, 2 & 3 ⑨⑨: Package Type
06 - 6nm B - 250um Bare Fiber 01 - Ø5.5x35
SS - Specify F - 900um Loose Tube(White)
G - 900um Loose Tube(Yellow)
④④: Handing Power E - 900um Loose Tube(Black)
0.1 - 100mW /5KW SSS - Specify
SS - Specify
Min. Pass Bandwidth @0.5dB
Max. Stop Bandwidth @25dB
Max. PDL (Port 1 to Port 3, @CWL±1nm)
Min. Optical Return Loss (only for Port 1 and Port 3)
Storage Temperature
Max. Optical Power
Max. Tensile Load
Fiber Type
Operating Temperature
0.1
-40 to +85
Corning HI 1060 Fiber
50
Specifications
100mW Average Power, 5KW Peak Power
5
0.8 (As Small As Possible)
Parameters
Nominal Center Wavelength
-5 to +70
2
Max. Insertion Loss (Port 1 to Port 3, @CWL±1nm)
Nominal Insertion Loss (Port 1 to Port 2)
High Power Band Pass Filter 1064nm 10W
Values
1064
1.2
6
Input
Extra port
Output
Form No.:D05-203-05 Rev.B
153
Spec Review No.: SR0902011C Date: Apr 19, 2023
Parameters Unit
Nominal Center Wavelength nm
Max. Insertion Loss over 1550+/-1nm dB
Min. Pass Band Width @0.5dB nm
Max. Stop Band width@25dB nm
Min. Extinction Ratio (only for F-Type)@23℃ dB
Min. Extinction Ratio (only for B-Type)@23℃ dB
Min. Optical Return Loss dB
Max. Optical Power(CW) mW
Max. Tensile Load N
Fiber Type -
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER will be 2dB lower.
Package Dimensions
Ordering Information
PMBPF-①①①①-②②-③③-④-⑤-⑥⑥-⑦⑦-⑧-⑨⑨-⑩⑩
①①①①: Center Wavelength ⑤: Axis Alignment⑦⑦: Fiber Jacket on Port 1, 2
1550 - 1550nm F - Fast Axis Blocked B - Bare Fiber
SSSS - Specify B - Both Axis Working C - 900um Loose Tube(Red)
S - Specify
②②: Pass Band Width ⑥⑥: Connector Type on Port 1, 2
02 - 2nm 1B - FC/UPC⑧: Fiber Length
SS - Specify 2B - FC/APC 0.8 - 0.8 m
3B - SC/UPC S - Specify
③③: Stop Band Width 4B - SC/APC
08 - 8nm S - Specify⑨⑨:Fiber Type
SS - Specify N - None 01A -PM1550 Fiber
④:Handling Power⑩⑩ Package Type
0.5 - 500mW 01 - Ø5.5x35
S - Specify
50
2.0
22
0.8
8.0
20
Specifications
Polarization Maintaining Band Pass Filter 1310nm 1550nm 300mW
-40 to +85
-5 to +70
PM 1550 panda fiber
5
500
Values
1550
Form No.:D05-203-05 Rev.B
154
Spec Review No.: SR0803010B Date:Apr.19, 2023
Unit
nm
dB
nm
nm
dB
dB
mW
N
-
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower .
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
BPF-①①①①-②②-③③-④④-⑤⑤-⑥⑥-⑦-⑧⑧-⑨⑨
①①①①: Center Wavelength ⑤⑤: Connector Type on Port1,2 ⑦: Fiber Length
1550 - 1550nm 1B - FC/UPC 0.8 - 0.8 m
2B - FC/APC S - Specify
②②: Pass Band Width 3B - SC/UPC
02 - 2nm 4B - SC/APC ⑧⑧:Fiber Type
SS - Specify N - None 02 - SMF-28e Fiber
③③: Stop Band Width ⑥⑥: Fiber Jacket on Port 1,2 ⑨⑨: Package Type
08 - 8nm B - 250um Bare Fiber 01 - Ø5.5x35
SS - Specify F - 900um Loose Tube(White)
S - Specify
④④: Handing Power
0.5 - 500mW
S - Specify
Max. PDL
Operating Temperature
Storage Temperature
Min. Optical Return Loss
Max. Optical Power (CW)
Max. Tensile Load
Fiber Type
50
Specifications
500
5
2
Parameters
Nominal Center Wavelength
Max. Insertion Loss over 1550+/-1nm
Min. Pass Band Width @0.5dB
Max. Stop Band Width @25dB
Band Pass Filter 1310nm 1550nm 300mW
Values
1550
0.8
0.1
-40 to +85
-5 to +70
8
Corning SMF-28e Fiber
Form No.:D05-203-05 Rev.B
155
Spec Review No.: SR2305028A Date: May 09, 2023
Parameters Unit
Nominal Center Wavelength nm
Max. Insertion Loss over 1550+/-1nm dB
Min. Pass Band Width @0.5dB nm
Max. Stop Band width@25dB nm
Min. Extinction Ratio (only for F-Type)@23℃ dB
Min. Extinction Ratio (only for B-Type)@23℃ dB
Min. Optical Return Loss dB
Max. Optical Power --
Max. Tensile Load N
Fiber Type --
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER will be 2dB lower and optical power is only 1000mW(CW).
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMBPF-①①①①-②②-③③-④-⑤-⑥⑥-⑦⑦-⑧-⑨⑨-⑩⑩
①①①①: Center Wavelength ⑤: Axis Alignment⑦⑦: Fiber Jacket on Port 1, 2
1550 - 1550nm F - Fast Axis Blocked B - Bare Fiber
SSSS - Specify B - Both Axis Working C - 900um Loose Tube(Red)
D - 900um Loose Tube(Blue )
②②: Pass Band Width ⑥⑥: Connector Type on Port 1, 2 E - 900um Loose Tube(Black )
02 - 2nm 1B - FC/UPC S - Specify
SS - Specify 2B - FC/APC
3B - SC/UPC ⑧: Fiber Length
③③: Stop Band Width 4B - SC/APC 0.8 - 0.8 m
08 - 8nm S - Specify S - Specify
SS - Specify N - None
⑨⑨:Fiber Type
④:Handling Power 01B -PM1550 Fiber
0.05 - 50mW
S - Specify⑩⑩ Package Type
01 - Ø5.5x35
50
2.0
22
0.8
8.0
20
Specifications
High Power Polarization Maintaining Band Pass Filter 1550nm 300mW
-40 to +85
-5 to +70
PM 1550 panda fiber
5
50mW Average Power, 1ns@50KHz, Peak Power 1kW
Values
1550
Form No.:D05-203-05 Rev.B
156
Spec Review No.: SR2306113A Date:Jun .28, 2023
Unit
nm
dB
nm
nm
dB
dB
W
N
--
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower .
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPBPF-①①①①-②②-③③-④④-⑤⑤-⑥⑥-⑦-⑧⑧-⑨⑨
①①①①: Center Wavelength ⑤⑤: Connector Type on Port1,2 ⑦: Fiber Length
1550 - 1550nm 1B - FC/UPC 0.8 - 0.8 m
SSSS - Specify 2B - FC/APC (Step) S - Specify
3D - SC/UPC
②②: Pass Band Width 4D - SC/APC (Step) ⑧⑧:Fiber Type
02 - 2nm N - None 02 - SMF-28e Fiber
SS - Specify SS - Specify
⑨⑨: Package Type
③③: Stop Band Width ⑥⑥: Fiber Jacket on Port 1,2 01 - Ø5.5x35
08 - 8nm B - 250um Bare Fiber
SS - Specify F - 900um Loose Tube(White)
G - 900um Loose Tube(Yellow)
④④: Handing Power E - 900um Loose Tube(Black)
01 - 1W S - Specify
SS - Specify
High Power Band Pass Filter 1550nm 10W
Values
1550
0.9
0.1
-40 to +85
-5 to +70
8
Corning SMF-28e Fiber
50
Specifications
1
5
2
Parameters
Nominal Center Wavelength
Max. Insertion Loss over 1550+/-1nm
Min. Pass Band Width @0.5dB
Max. Stop Band Width @25dB
Max. PDL
Operating Temperature
Storage Temperature
Min. Optical Return Loss
Max. Optical Power (CW)
Max. Tensile Load
Fiber Type
Form No.:D05-203-05 Rev.B
157
Spec Review No.: SR1905009B Date:May. 22, 2023
Unit
nm
nm
dB
dB
dB
dB
dB
dB
dB
W
N
-
℃
℃
*Above parameter only for inner core.
* Above specifications are for device without connector.
* For devices with connectors, IL will be 1dB higher, RL will be 5dB lower,ER will be 2dB lower & handling power will be only 1W(CW)
* The PM fiber and connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMCIR-①①-②②②-③-④④④-⑤⑤⑤-⑥⑥⑥-⑦⑦-⑧-⑨⑨⑨
①①: Wavelength ⑤⑤⑤: Fiber Jacket ⑦⑦: Handling Power
78 - 780nm B - Bare Fiber 0.3 - 0.3W
SS - Specify C - 900um loose tube(Red） S - Specify
S - Specify
②②②: Package Type ⑧: Axis Alignment
C117 - Type C117 ⑥⑥⑥: Fiber Length F - Fast Axis Blocked
1 - 1 m
③: Port Configuration S - Specify ⑨⑨⑨: Fiber Type
1 - 1x2 37 - Nufern PM780-HP Fiber
S - Specify
④④④: Connector Type
1A - FC/UPC
2A - FC/APC（Step）
N - None
S - Specify
1.3
1.6
Fiber Type
5
20
50
50
Max. Insertion Loss at 23℃ (1 to 2, 2 to 3)
Min. Extinction Ratio
Operating Temperature
Storage Temperature
High Power Polarization Maintaining Circulator Hybrid 7xxnm 300mW
Min. Cross Talk
Min. Return Loss
Max. Average Power
Max. Tensile Load
Min. Isolation at 23℃ (2 to 1, 3 to2)
Typ. Insertion Loss at 23℃ (1 to 2, 2 to3)
Specifications
Parameters
Center Wavelength (λc)
Operating Wavelength Range
Typ. Peak Isolation (2 to1, 3 to 2)
780
±5
0.3 or Specify
-20 to+75
-5 to +50
Nufern PM 780-HP Fiber
Values
30
25
78
84
90 862
2
Form No.: D05-230-05 Rev.A
158
Spec Review No.: SR2107003B Date:Sep. 19, 2023
Unit
nm
nm
dB
dB
dB
dB
dB
dB
dB
W
N
-
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 1.2dB higher, RL will be 5dB lower and ER will be 2dB lower & hangdling power will be only 1W(CW)
*The PM fiber and the key are aligned to the slow axis & fast axis is blocked.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMCIR-①①-②-③-④④④-⑤⑤⑤⑤-⑥-⑦⑦-⑧-⑨⑨⑨
①①: Wavelength ④④④: Connector Type on Port 1/2/3 ⑦⑦: Handling Power
92 - 920nm 1A - FC/UPC 01 -1W
S - Specify 2A - FC/APC(Step) S - Specify
N - None
②: Package Type S - Specify ⑧: Axis Alignment
C117 - Type C117 F - Fast Axis Blocked
⑤⑤⑤: Fiber Jacket on Port 1/2/3
③: Port Configuration B - Bare Fiber ⑨⑨⑨: Fiber Type on Port 1/2/3
1 - 1x2 C - 900um Loose Tube(Red) 20 - PM 850 panda Fiber
S - Specify S - Specify 37 - PM 780 panda Fiber
74 - Nufern PM 780-HP Fiber
⑥: Fiber Length S - Specify
1 - 1m
S - Specify
1.6
2.0
Fiber Type
5
18
50
50
Max. Insertion Loss at 23℃ (1 to 2, 2 to 3)
Min. Extinction Ratio
Operating Temperature
Storage Temperature
High Power Polarization Maintaining Circulator 8xxnm 300mW
Min. Cross Talk
Min. Return Loss
Max. Average Power @ Proper SOP
Max. Tensile Load
Min. Isolation at 23℃ (2 to 1, 3 to2)
Typ. Insertion Loss at 23℃ (1 to 2, 2 to3)
Specifications
Values
25-30
20
Parameters
Center Wavelength (λc)
Operating Wavelength Range
Typ. Peak Isolation (2 to1, 3 to 2)
920
±10
1 or Specify
-20 to+75
-5 to +50
Nufern PM 780-HP Fiber
78
84
90 862
2
Form No.: D05-230-05 Rev.B
159
CAT-05-076B
Spec No.: CAT-05-076B Date:
Specifications
Unit
nm
nm
dB
dB
dB
dB
dB
W
N
℃
℃
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower,handling power will be only 1W(CW).
*For pulse applications, pls discuss with Optizone Technology.
*The material must be RoSH compliant.
Package Dimensions
Ordering Information
FCIR-①①-②-③-④④④-⑤⑤⑤-⑥-⑦⑦-⑧⑧⑧
①①: Wavelength ④④④: Connector Type on Port 1/2/3 ⑥: Fiber Length
85 - 850nm 1A - FC/UPC 1 - 1m
S - Specify 2A - FC/APC(Step) S - Specify
N - None
②:Package Type ⑦⑦:Handling Power
C139 - Type C139 ⑤⑤⑤: Fiber Jacket on Port 1/2/3 01 - 1W
S - Specify B - Bare Fiber S - Specify
F - 900um Loose Tube(White)
③:Port Configuration S - Specify ⑧⑧⑧:Fiber Type on Port 1/2/3
1 - 1x2 38 - HI 780 Fiber
112- Nufern HI780-HP fiber
S - Specify
Max. Optical Power (CW)
850
Min. Cross talk
Max.Polarization Dependent Loss 0.25
Storage Temperature
±10
23
0 to +60
1
Max. Tensile Load 5
10 to +50
45
45
Polarization Insensitive Optical Circulator 8xxnm 300mW
Operating Temperature
Parameter
Center Wavelength
Operating Wavelength Range
Values
Min. Isolation, (3→2, 2→1), 23℃
Min. Return loss
Max. Insertion loss(1→2,2→3), 23℃ 1.8
Form No.: D05-203-05 Rev.A
160
CAT-09-013D
Spec No.: CAT-09-013D
Unit
nm
nm
dB
dB
dB
dB
dB
dB
dB
mW
N
-
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the key are aligned to the slow axiscast axis is blocked.
Package Dimensions
Ordering Information
PMCIR-①①-②-③-④④④-⑤⑤⑤-⑥-⑦-⑧
①①: Wavelength ④④④: Connector Type on Port 1, 2 & 3 ⑥: Fiber Type
06 - 1064nm 1A- FC/UPC 4A - PM980 Fiber
SS- Specify 2A - FC/APC SS - Specify
3D - SC/UPC
②: Type 4D - SC/APC ⑦: Fiber Length
B - Type B N - None 1 - 1.0m
S - Specify S - Specify
③: Port
1 - 1x2 ⑤⑤⑤: Fiber Jacket on Port 1, 2 & 3 ⑧: Package Dimensions
B - Bare Fiber 01 - Ø5.5x35
C - 900um Losse tube (Red)
D - 900um Losse tube (Blue)
S - Specify
Fiber Type
Operating Temperature
Storage Temperature
Max. Insertion Loss (1→2, 2→3)
Min. Return Loss
Min. Extinction Ratio
Min. Cross Talk
Max. Optical Power (CW)
Max. Tensile Load
Parameter
Center Wavelength
Operating Wavelength Range
Typ. Isolation (3→2, 2→1)
Min. Isolation at 23°C (3→2, 2→1)
Typ. Insertion Loss (1→2, 2→3)
-40 to +85
20
50
50
300
2.1
30
25
5
Polarization Maintaining Optical Circulator 10xxnm 300mW
Date:
Specifications
PM Panda Fiber
-5 to + 50
Values
1064
±5
1.8
Form No.: D05-230-05 Rev.A
161
CAT-09-012D
Spec No.: CAT-09-012D
Unit
nm
nm
dB
dB
dB
dB
dB
dB
dB
mW
N
-
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower, and ER will be 2dB lower.
*The PM fiber and the key are aligned to the slow axis, and fast axis blocked.
Package Dimensions
Ordering Information
PMCIR-①①-②-③-④④④④-⑤⑤⑤⑤-⑥-⑦-⑧
①①: Wavelength ④④④④: Connector Type on Port 1, 2, 3 & 4 ⑥: Fiber Type
06 - 1064nm 1A- FC/UPC 4A - PM980 Fiber
SS- Specify 2A - FC/APC SS - Specify
3D - SC/UPC
②: Type 4D - SC/APC ⑦: Fiber Length
B - Type B N - None 1 - 1.0m
S - Specify S - Specify
③: Port
2 - 2x2 ⑤⑤⑤⑤: Fiber Jacket on Port 1, 2, 3 & 4 ⑧: Package Dimensions
B - Bare Fiber 01 - Ø5.5x35
C - 900um Losse tube (Red)
D - 900um Losse tube (Blue)
S - Specify
Polarization Maintaining Optical Circulator 10xxnm 300mW
-40 to +85
2.8
28
20
50
20
5
PM Panda Fiber
Values
1064
±5
2.1
Date:
Parameter
Min. Isolation (1→4, 4→3, 3→2, 2→1), 23℃
Min. Isolation (1→4, 4→3, 3→2, 2→1), -5~50℃
Typ. Insertion Loss (1→2, 2→3, 3→4, 4→1), 23℃
Max. Insertion Loss (1→2, 2→3, 3→4, 4→1), -5~50℃
-5 to + 50
Specifications
Center Wavelength
Operating Wavelength Range
50
300
Max. Tensile Load
Fiber Type
Operating Temperature
Storage Temperature
Min. Return Loss
Min. Extinction Ratio
Min. Cross Talk
Max. Optical Power ( CW, total )
1
3
Form No.: D05-230-05 Rev.A
162
CAT-02-003F
Spec No.:CAT-02-003F Date:
Specifications
Unit
nm
nm
dB
dB
dB
dB
dB
dB
dB
mW
N
-
℃
℃
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower.
Package Dimensions
Ordering Information
FCIR-①①-②-③③③-④④④-⑤
①①: Wavelength ④④④: Fiber Jacket on Port 1, 2 & 3
06 - 1064nm B - Bare Fiber
SS - Specify E - 900um Losse tube (Black)
F - 900um Losse tube (White)
②: Port Type R - 3mm Cable (Blue)
1 - 1x2 S - Specify
③③③: Connector Type on Port 1, 2 & 3 ⑤: Fiber Length
1A- FC/UPC 1 - 1.0m
2A - FC/APC S - Specify
3D - SC/UPC
4D - SC/APC
N - None
S - Specify
Fiber Type
Operating Temperature
Storage Temperature
Min. Isolation(3→2, 2→1), 23℃
Min. Directivity
Min. Return Loss
Max. PDL, 23℃
Max. Optical Power (CW, total)
Max. Tensile Load
Parameter
Center Wavelength
Operating Wavelength Range
Max. Insertion Loss(1→2, 2→3)@1064nm, 23℃
Max. Insertion Loss(1→2, 2→3)@1064nm±10, 23℃
Typ. Isolation(3→2, 2→1), 23℃
0.2
300
5
Values
1064
± 10
2.1, Typ.1.8
Polarization Insensitive Optic Circulator 3 Ports 10xxnm 300mW
*Above specifications are for device without connector.
2.8
25
20
45
HI 1060 Fiber
-5 to +50
-40 to +85
50
Form No.: D05-230-05 Rev.A
163
Spec Review No.: SR2309018A Date: Sep. 11, 2023
Specifications
Unit
nm
nm
dB
dB
dB
dB
dB
dB
dB
W
kW
N
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower,ER will be 2dB lower & handling power will be only 1W(CW).
*The PM fiber and connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMCIR-①①-②-③-④④④-⑤⑤⑤-⑥-⑦⑦-⑧-⑨⑨⑨
①①: Wavelength ④④④: Connector Type on Port 1/2/3 ⑦⑦: Handling Power
06 - 1064nm N - None 50 - 50W
S - Specify S - Specify S - Specify
②: Package Type ⑤⑤⑤: Fiber Jacket on Port 1/2/3 ⑧: Axis Alignment
C231B - Type C231B B - Bare Fiber F - Fast Axis Blocked
③: Port Configuration ⑥: Fiber Length ⑨⑨⑨: Fiber Type on Port 1/2/3
1 - 1x2 1 - 1.0m 45 - PLMA-GDF 10/125-M NA0.075 Fiber
S - Specify S - Specify S - Specify
Operating Temperature
5
Storage Temperature 0 to+75
10 to +50
Max. Tensile Load
High Power Polarization Maintaining Circulator 10xxnm 300mW ~50W
Parameters
Center Wavelength (λc)
Operating Wavelength Range
Values
1064
±5
Min. Extinction Ratio at 23℃(Port 2) 20
Max. Peak Power 10 @ 10ns
Max. Average Power @ Proper SOP 50 or Specify
Min. Cross Talk(1 to 3, 3 to 1)
Min. Return Loss （All Port) 50
50
Min. Isolation at λc, 23℃ (2 to 1) 28
Min. Isolation at λc, 23℃ (3 to2) 20
Max. Insertion Loss at 23℃ (1 to 2) 0.8
Max. Insertion Loss at 23℃ (2 to 3) 1.0
Form No.: D05-203-05 Rev.B
164
Spec Review No.: SR2502003A Date: Feb. 6, 2025
Specifications
Unit
nm
nm
dB
dB
dB
dB
dB
dB
dB
dB
W
kW
N
℃
℃
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower & handling Power will be only 1W(CW).
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPCIR-①①-②-③-④-⑤-⑥-⑦⑦-⑧
①①: Wavelength Range ④: Connector Type ⑦⑦:Handling Power
06 - 1064nm N - None 60 - 60W
S - Specify S - Specify S - Specify
②:Package Type ⑤: Fiber Jacket ⑧:Fiber Type on Port 1/2/3
C231B - Type C231B B - Bare Fiber 104 - MMF 62.5/125 OM1 Fiber
S - Specify 108 - Nufern LMA-GDF-25/400-HP-M NA0.065 Fiber
113 - LMA-GDF-25/250-M NA0.065 Fiber
③:Port Configuration ⑥: Fiber Length 122 - Nufern LMA-GDF-14/250-HP-M,NA0.07 Fiber
1 - 1x2 1 - 1m S - Specify
S - Specify
±10
50
0.2
Min. Return loss（All Port)
10
Typ. Insertion Loss at 23℃, λc (1 to 2,2 to 3)
1.0
Max.Insertion Loss at 23℃, λc (1 to 2)
Max. Tensile Load
Operating Temperature
0.8
Max. Peak Power 10@ 10ns
Min. Isolation at 23℃, λc (3 to 2)
Storage Temperature 0 to +60
High Power Circulator 10xxnm 300mW~50W
Parameter
Center Wavelength (λc)
Values
1064
Operating Wavelength Range
0.6
Max.Insertion Loss at 23℃, λc (2 to 3)
*Above specifications are for device without connector.
+10 to +50
Min. Isolation at 23℃, λc (2 to 1) 28
60 or Specify
5
Max. Optical Average Power
Min. Cross Talk (1 to 3, 3 to 1) 50
Max. Polarization Dependent Loss
Form No.: D05-203-05 Rev.B
165
Spec Review No.: SR2409011B Date: Sep.18.2024
Unit
nm
nm
Typ. Insertion Loss at 23℃ (Port1 to Port2, Port2 to Port3) dB
dB
dB
dB
dB
dB
dB
W
Max. Peak Power kW
N
℃
℃
* Above specifications are for device without connector.
* For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower,ER will be 2dB lower & handling power will be only 1W(CW)
* The PM fiber and connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMCIR-①①-②-③-④-⑤-⑥-⑦-⑧-⑨
①①: Center Wavelength ④: Connector Type ⑦: Average Power
98 - 980nm 1A - FC/UPC 05 - 5W
03 - 1030nm 2A - FC/APC S - Specify
06 - 1064nm N - None
S - Specify S - Specify ⑧:Axis Alignment
F - Fast Axis Blocked
②:Package Type ⑤: Fiber Jacket
C239 - Type C239 B - Baer Fiber ⑨: Fiber Type
C - 900um Loose Tube(Red) 1 - PM980 Fiber
③: Port Configuration S - Specify 45 - PLMA-GDF 10/125-M NA0.075 Fiber
1 - 1x2 65 - Nufern PM1060L 10/125 GSF NA0.085 Fiber
S - Specify ⑥:Fiber Length 90 - PM-98-025-B (长飞) Fiber
0.6 - 0.6m S - Specify
S - Specify
10
Operating Temperature
Storage Temperature
Max. Tensile Load
-20 to+75
25
50
Max. Average Power
Min. Cross Talk
Typ. Peak Isolation at 23℃ (Port2 to Port1, Port3 to Port2)
Min. Isolation at λc,23℃ (Port2 to Port1, Port3 to Port2)
Center Wavelength (λc)
10 to +50
5
Min. Extinction Ratio at 23℃ (Port1 to Port2, Port2 to Port3) 20
980,1030,1064 or Specify
0.6
5 or Specify
Operating Wavelength Range
High Power Polarization Maintaining Circulator 10xxnm 300mW
Min. Return Loss (Port1/Port2/Port3)
30
Specifications
±10
Values
Max. Insertion Loss at 23℃ (Port1 to Port2, Port2 to Port3) 1.0
50
Parameters
Form No.: D05-203-05 Rev.B
166
CAT-09-015E
Spec No.: CAT-09-015E
Unit
nm
nm ±30 ±20
dB 0.7 0.6
dB 0.9 0.8
dB 40 20
dB 46 30
dB
dB 22 20
dB
mW
N
-
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
Package Dimensions
Ordering Information
PMCIR-①①-②-③-④④④-⑤⑤⑤-⑥-⑦-⑧
①①: Wavelength ④④④: Connector Type on Port 1, 2 & 3 ⑥: Fiber Type
31 - 1310nm 1B- FC/UPC 2B - PM1550 Fiber
55 - 1550nm 2B - FC/APC 3A - PM1310 Fiber
SS- Specify 3D - SC/UPC SS - Specify
4D - SC/APC
②: Type N - None ⑦: Fiber Length
A - Type A S - Specify 1 - 1.0m
B - Type B S - Specify
⑤⑤⑤: Fiber Jacket on Port 1, 2 & 3
③: Port B - Bare Fiber ⑧: Package Dimensions
1 - 1x2 C - 900um Losse tube (Red) 01 - Ø5.5x35
D - 900um Losse tube (Blue)
E - 900um Losse tube (Black)
S - Specify
Date:
Specifications
Parameter
Type
Center Wavelength
Operating Wavelength Range
1310 or 1550
5
50
50
500
Values
Polarization Maintaining Optical Circulator 15xxnm 500mW
Operating Temperature
Storage Temperature
Max. Insertion Loss (1→2, 2→3)
Min. Return Loss
Min. Extinction Ratio
Min. Cross Talk
-5 to +70
-40 to +85
Type A Type B
Max. Optical Power (CW)
Max. Tensile Load
PM Panda Fiber
Min. Isolation, 23℃ (3→2, 2→1)
Typ. Isolation (3→2, 2→1)
Typ. Insertion Loss (1→2, 2→3)
Fiber Type
Form No.: D05-230-05 Rev.A
167
CAT-09-014D
Spec No.: CAT-09-014D
Unit
Type A Type B
nm
nm ± 30 ± 20
dB 0.8 0.7
dB 1.1 1.0
dB 40 20
dB 50 30
dB
dB 20 20
dB
mW
N
-
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, and ER will be 2dB lower.
*The transmission optical path of A type is different from B type: A type: 1→2, 2→3, 3→4; B type: 1→2, 2→3, 3→4, 4→1.
Package Dimensions
Ordering Information
PMCIR-①①-②-③-④④④④-⑤⑤⑤⑤-⑥-⑦-⑧
①①: Wavelength ④④④④: Connector Type on Port 1, 2, 3 & 4 ⑥: Fiber Type
31 - 1310nm 1B- FC/UPC 2B - PM1550 Fiber
55 - 1550nm 2B - FC/APC 3B - PM1310 Fiber
SS- Specify 3D - SC/UPC SS - Specify
4D - SC/APC
②: Type N - None ⑦: Fiber Length
A - Type A S - Specify 1 - 1.0m
B - Type B S - Specify
⑤⑤⑤⑤: Fiber Jacket on Port 1, 2, 3 & 4
③: Port B - Bare Fiber ⑧: Package Dimensions
2 - 2x2 C - 900um Losse tube (Red) 01 - Ø55x35
D - 900um Losse tube (Blue)
E - 900um Losse tube (Black)
S - Specify
Max. Optical Power (CW)
Max. Tensile Load
Fiber Type
Operating Temperature
Storage Temperature
Typ. Insertion Loss
Max. Insertion Loss
Min. Return Loss
Min. Extinction Ratio
*The PM fiber and the key are aligned to the slow axis.
Date:
Specifications
-5 to +70
-40 to +85
Values
Min. Cross Talk (Port 1 to Port 3, Port 2 to Port 4)
Parameter
Type
Center Wavelength
Polarization Maintaining Optical Circulator 15xxnm 500mW
PM Panda Fiber
1310 or 1550
5
50
50
500
Operating Wavelength Range
Min. Isolation at 23℃
Typ. Isolation
1
3
Form No.: D05-230-05 Rev.A
168
CAT-02-002E
Spec No.: CAT-02-002E Date:
Specifications
Unit
nm 1310 1550 C&L 1610
nm ±30 ±30 1525~1610 ±30
dB
dB
dB
dB
dB
ps
dB
dB
mW
N
-
℃
℃
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
Package Dimensions
Ordering Information
FCIR-①①-②-③③③-④④④-⑤-⑥⑥
①①: Wavelength ③③③: Connector Type on Port 1, 2 & 3 ⑤: Fiber Length
31 - 1310nm 1B- FC/UPC 1 - 1.0m
55 - 1550nm 2B - FC/APC S - Specify
CL - C&L Band 3D - SC/UPC
61 - 1610nm 4D - SC/APC ⑥⑥: Package Dimensions
SS - Specify N - None 03 - Ø5.5x50
S - Specify 82 - 90x20x10
②: Port Type
1 - 1x2 ④④④: Fiber Jacket on Port 1, 2 & 3
B - Bare Fiber
E - 900um Losse tube (Black)
F - 900um Losse tube (White)
R - 3mm Cable (Blue)
S - Specify
Storage Temperature
Package Dimensions
Max. Optical Power (CW)
Max. Tensile Load
Fiber Type
Operating Temperature
dia 5.5 x 50 (Bare fiber or 900um Loose Tube)
Max. Insertion loss(1→2, 2→3)
Typ. Isolation(3→2, 2→1)
Max. PDL
Max. PMD
Min. Return loss
Min. Cross talk 50
50
0 to +70
Typ. Insertion loss(1→2, 2→3)
*Above specifications are for device without connector, and testing at 23℃.
90x20x10 (2.0mm or 3.0mm Cable)
-40 to +85
0.15
0.1
500
5
SMF-28e Fiber
mm
Polarization Insensitive Fiber Optic Circulator 15xxnm 500mW
0.6
0.8
50
Min. Isolation(3→2, 2→1) 40
Parameter Values
Center Wavelength
Operating Wavelength Range
1
1
Form No.: D05-230-05 Rev.A
169
Spec Review No.: SR2302514A Date: May. 11, 2023
Unit
-
nm
nm
dB
dB
dB
dB
dB
dB
dB
W
N
-
℃
℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER will be 2dB lower, and Optical power is only 1W.
*The PM fiber and the connector key are aligned to the slow axis and fast axis is blocked.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMCIR-①①-②-③-④④-⑤⑤⑤-⑥⑥⑥-⑦⑦-⑧-⑨⑨
①①: Wavelength ④④: Handling Power ⑥⑥⑥: Fiber Jacket on Port 1, 2&3 ⑧: Fiber Length
31 - 1310nm 01 - 1W B - Bare Fiber 1 - 1.0m
55 - 1550nm 05 - 5W C - 900um Losse tube (Red) S - Specify
SS - Specify SS - Specify D - 900um Losse tube (Blue)
E - 900um Losse tube (Black) ⑨⑨: Package Dimensions
②: Type ⑤⑤⑤: Connector Type on Port 1, 2&3 S - Specify 02 - Ø5.5x40
A - Type A 1A- FC/UPC 08 - 80x12x10
B - Type B 2A - FC/APC ⑦⑦: Fiber Type
3D - SC/UPC 2A - PM1550 Fiber
③: Port 4D - SC/APC 3A - PM1310 Fiber
1 - 1x2 N - None SS - Specify
S - Specify
1, 3, 5, 10 or Specify
5
1310 or 1550
Type B
PM Panda Fiber
-5 to +70
-40 to +85
±30 ±20
35 20
40
50
20
50
High Power Polarization Maintaining Circulator 15xxnm 10W
Specifications
30
Values
Type A
Parameter
Type
Center Wavelength
Operating Wavelength Range
Min. Isolation, 23℃ (3→2,2→1)
Typ. Isolation (3→2,2→1)
Typ. Insertion Loss (1→2,2→3)
Max. Insertion Loss (1→2,2→3)
0.8 0.7
1 0.9
Max. Optical Power (CW, SOP)
Max. Tensile Load
Fiber Type
Operating Temperature
Storage Temperature
Min. Return Loss
Min. Extinction Ratio
Min. Cross Talk (1→3)
2
Form No.:D05-203-05 Rev.B
170
Spec Review No.: SR2302501A Date: May. 09, 2023
Specifications
Unit
nm
nm
dB
dB
dB
dB
ps
dB
dB
W
N
-
℃
℃
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lowerand optical power is only 1W.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPCIR-①①-②-③③-④④④-⑤⑤⑤-⑥-⑦⑦
①①: Wavelength ④④④: Connector Type on Port 1, 2 & 3 ⑥: Fiber Length
31 - 1310nm 1A- FC/UPC 1 - 1.0m
55 - 1550nm 2A - FC/APC S - Specify
SS - Specify 3D - SC/UPC
4D - SC/APC ⑦⑦: Package Dimensions
②: Port N - None 03 - Ø5.5x50
1 - 1x2 S - Specify 08 - 80x12x10
③③: Power ⑤⑤⑤: Fiber Jacket on Port 1, 2 & 3
01 - 1W B - Bare Fiber
05 - 5W E - 900um Losse tube (Black)
10 - 10W F - 900um Losse tube (White)
S - Specify R - 3mm Cable (Blue)
S - Specify
High Power Polarization Insensitive Circulator 15xxnm 10W
40
Operating Temperature
50
-5 to +70
50
Parameter
Center Wavelength
Operating Wavelength Range
Max. Optical Power (CW,Total)
Storage Temperature
Max. Polarization Mode Dispersion
Min. Isolation (3→2, 2→1)
Min. Return loss
Min. Cross talk (1→3)
Max. Polarization Dependent Loss
1.2
±20
Typ. Insertion Loss (1→2, 2→3)
Max. Insertion Loss (1→2, 2→3)
Max. Tensile Load
Fiber Type
Values
*Above specifications are for device without connector, and testing at 23℃.
-40 to +85
0.2
0.1
1, 3, 5 ,10 or Specify
5
SMF-28e Fiber
1310, 1550, or Specify
0.9
2
Form No.: D05-203-05 Rev.B
171
CAT-10-020C
Spec No.: CAT-10-020C Date:
Parameter Unit
Type
Center Wavelength nm
Operating Wavelength Range nm
Min. Isolation, 23℃ (3→2, 2→1) dB
Typ. Isolation (3→2, 2→1) dB
Typ. Insertion Loss (1→2, 2→3) dB
Max. Insertion Loss (1→2, 2→3) dB
Min. Return Loss dB
Min. Extinction Ratio dB
Min. Cross Talk dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Fiber Type
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
Package Dimensions
Ordering Information
PMCIR-①①-②-③-④④④-⑤⑤⑤-⑥-⑦-⑧
①①: Wavelength ④④④: Connector Type on Port 1, 2 & 3 ⑥: Fiber Type
20 - 2000nm 1A- FC/UPC 1C - PM1950 Fiber
SS - Specify 2A - FC/APC 2A - PM1550 Fiber
3D - SC/UPC SS - Specify
②: Type 4D - SC/APC
A - Type A N - None ⑦: Fiber Length
B - Type B S - Specify 1 - 1.0m
S - Specify
③: Port ⑤⑤⑤: Fiber Jacket on Port 1, 2 & 3
1 - 1x2 B - Bare Fiber ⑧: Package Dimensions
C - 900um Losse tube (Red) 02 - Ø55x40
D - 900um Losse tube (Blue)
S - Specify
-40 to +85
Type A
35
45
1.1
1.5
Type B
18
25
0.8
5
PM 1550 Panda Fiber PM 1950 Panda Fiber
-5 to +70
500
1.8
20 18
Type B
18
25
1.0
1.5
2000
±30
Polarization Maintaining Optical Circulator 19xxnm 300mW
50
50
Type A
35
45
1.4
Specifications
1.2
Values
Unit: mm
Axis Alignment: Slow Axis Working, Fast Axis Blocked. Form No.: D05-230-05 Rev.A
172
Spec Review No.: SR1812009B Date: May. 09, 2023
Specifications
Unit
nm
nm
dB
dB
dB
dB
dB
ps
W
N
-
℃
℃
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, and optical power is only 1000mW(CW).
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPCIR-①①-②-③③-④④④-⑤⑤⑤-⑥-⑦⑦
①①: Wavelength ④④④: Connector Type on Port 1, 2 & 3 ⑤⑤⑤: Fiber Jacket on Port 1, 2 & 3
20 - 2000nm 1A- FC/UPC B - 250um Bare Fiber
SS - Specify 2A - FC/APC L - 900um Loose Tube
3D - SC/UPC S - Specify
②: Port Type 4D - SC/APC
1 - 1x2 N - None ⑥: Fiber Length
S - Specify 1 - 1.0m
③③: Optical Power S - Specify
01 - 1W ⑤⑤⑤: Fiber Jacket on Port 1, 2 & 3
05 - 5W B - Bare Fiber ⑦⑦: Package Dimensions
SS - Specify E - 900um Losse tube (Black) 03 - Ø5.5x50
F - 900um Losse tube (White) 08 - 80x12x10
R - 3mm Cable (Blue)
S - Specify
2000
±20
20
1.5
-5 to +70
-40 to +85
0.15
1, 3, 5 or Specify
5
SMF-28e Fiber
*Above specifications are for device without connector.
Max. Polarization Mode Dispersion
Min. Isolation, 23℃ (3→2, 2→1), λc
Min. Return Loss
Min. Cross Talk
Max. Polarization Dependent Loss
50
50
0.2
Max. Tensile Load
Fiber Type
Storage Temperature
High Power Polarization Insensitive Optical Circulator 19xx~20xxnm 300mW~10W
Operating Temperature
Parameter
Center Wavelength
Operating Wavelength Range
Max. Optical Power (CW, Total)
Max. Insertion Loss, 23℃ (1→2, 2→3), λc
Values
2
Form No.: D05-203-05 Rev.A
173
CAT-05-067C
Spec No.:CAT-05-067C Date:
Unit
nm
nm
dB
dB
dB
dB 20 18
dB
dB
W
N
PM 1550 Panda Fiber PM 1950 Panda Fiber
℃
℃
* Above specifications are for devices without the connectors.
* For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER will be 2dB lower, and optical power is only 1000mW.
*The PM fiber and the connector key are aligned to the slow axis.
*For handling high power, proper alignment of polarization is necessary.
Package Dimensions
Ordering Information
HPMCIR-①①-②-③-④④-⑤⑤⑤-⑥⑥⑥-⑦-⑧-⑨
①①: Wavelength ⑤⑤⑤: Connector Type on Port 1, 2 & 3 ⑦: Fiber Type
20 - 2000nm 1A- FC/UPC 1C - PM1950 Fiber
SS - Specify 2A - FC/APC 2A - PM1550 Fiber
3D - SC/UPC SS - Specify
②: Type 4D - SC/APC
A - Type A N - None ⑧: Fiber Length
S - Specify 1 - 1.0m
③: Port S - Specify
1 - 1X2 ⑥⑥⑥: Fiber Jacket on Port 1, 2 & 3
B - Bare Fiber ⑨: Package Dimensions
④④:Handling Power C - 900um Losse tube (Red) 02 - Ø5.5x40
01 - 1W D - 900um Losse tube (Blue) 08 - 80x12x10
SS - Specify S - Specify
Min. Return Loss
Min. Isolation,23℃
Typ. Insertion Loss
Max. Insertion Loss
Operating Temperature
Storage Temperature
Min. Cross Talk
Max. Optical Power (CW)
Max. Tensile Load
Fiber Type
-40 to +85
-5 to + 70
50
Specifications
1, 3, 5 or Specify
5
±30
40
Min. Extinction Ratio
Parameter
High Power Polarization Maintaining Optical Circulator 19xx~20xxnm 10W
Type A
2000
Values
1.8
32
1.5
Type
Center Wavelength
Operating Wavelength Range
1
Height:10
Package for 1～5W Package for 6～10W
Form No.:D05-230-05 Rev.A
174
CAT-10-034B
Spec No.: CAT-10-034B Date:
Unit
-
nm
nm
dB
dB
dB
dB
dB
dB
dB
mW
N
-
℃
℃
*Above specifications are for device without connector.
*The transmission optical path of B type: 1→2, 2→3, 3→4, 4→1.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
Package Dimensions
Ordering Information
PMCIR-①①-②-③-④④④④-⑤⑤⑤⑤-⑥-⑦-⑧
①①: Wavelength ④④④④: Connector Type on Port 1, 2, 3 & 4 ⑥: Fiber Type
20 - 2000nm 1A- FC/UPC 1C - PM1950 Fiber
SS - Specify 2A - FC/APC 2A - PM1550 Fiber
3D - SC/UPC SS - Specify
②: Type 4D - SC/APC
B - Type B N - None ⑦: Fiber Length
S - Specify 1 - 1.0m
③: Port S - Specify
2 - 2x2 ⑤⑤⑤⑤: Fiber Jacket on Port 1, 2, 3 & 4
B - Bare Fiber ⑧: Package Dimensions
C - 900um Losse tube (Red) 02 - Ø5.5x40
D - 900um Losse tube (Blue)
S - Specify
Storage Temperature -40 to +85
Fiber Type PM 1550 Panda Fiber PM 1950 Panda Fiber
Operating Temperature -5 to +70
Max. Optical Power (CW) 500
Max. Tensile Load 5
Min. Extinction Ratio
Min. Cross Talk 50
20 18
Typ. Isolation 25
Min. Return Loss 50
Max. Insertion Loss 1.4 1.7
Min. Isolation, 23℃ 18
Typ. Insertion Loss 1.0 1.2
Type Type B
Center Wavelength 2000
Polarization Maintaining Optical Circulator 20xxnm 300mW
Specifications
Parameter Values
Operating Wavelength Range ±30
1
3
Form No.: D05-230-05 Rev.A
175
CAT-10-002C
Spec No.: CAT-10-002C Date:
Specifications
Unit
nm
nm
mm
dB
dB
dB
dB
mW
N
℃
℃
*Above specifications are for device without connector
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
C-①-②-③-④-⑤-⑥⑥-⑦⑦-⑧-⑨-⑩-⑪⑪-⑫
①: Wavelength ④: Lens Type ⑦⑦: Fiber Jacket ⑪⑪: Package Type
1310 - 1310nm G - Grin Lens B - Bare Fiber 88 - Ø1.4x9 Glass
1550 - 1550nm C - C Lens E - 900um black Loose Tube 51 - Ø2.78x9 Glass
3155 - 1310/1550nm S - Specify 89 - Ø1.8x10
S - Specify ⑤: Working Distance 40 - Ø3.2x10
5 - 5mm ⑧: Fiber Type 34 - Ø3.2x14
②: Pigtail Type 15- 15mm 5 - SMF-28e Fiber S - Specify
S - Single Fiber S - Specify O3 - YOFC PH1011-C fiber（G657A2）
D - Dual Fiber ⑥⑥: Connector Type ⑫: Nominal Beam Diameter
1A - FC/UPC ⑨: Fiber Orientation 0.36 - 0.36mm @1550nm&1310nm
③: Lens Diameter 2A - FC/APC (Step) O - O Type (for Single Fiber) 0.45 - 0.45mm @1550nm
1 - 1.8mm 3D - SC/UPC V - Vertical (for Dual Fiber) 0.32 - 0.32mm @1310nm
2 - 1.0mm (for Single Fiber only) 4D - SC/APC (Step) 0.42 - 0.42mm @1310nm
S - Specify N - None ⑩: Fiber Length S - Specify
S - Specify 1-1m
S - Specify
Collimator 9xx~15xxnm 300mW
Values
1310 or 1550
±30
5 or Specify
0.2
Parameters
Center Wavelength
Operating Wavelength Range
Working Distance
0.25
60
0.02
-40 to +85
500
5
SMF-28e Fiber
-5 to +70
Typ. Insertion Loss at 5mm WD
Max. Insertion Loss at 5mm WD
Storage Temperature
Min. Return Loss
Max. PDL
Max. Optical Power (CW)
Max. Tensile Load
Fiber Type
Operating Temperature
L
±
Form No.: D05-230-05 Rev.B
176
CAT-10-001C
Spec No.: CAT-10-001C Date:
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Working Distance mm
Typ. Insertion Loss at 5mm dB
Max. Insertion Loss at 5mm dB
Min. Return Loss dB
Max. PDL dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Fiber Type
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher and RL will be 5dB lower.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
C-①-②-③-④-⑤-⑥⑥-⑦⑦-⑧-⑨-⑩-⑪⑪-⑫
①: Wavelength ④: Lens Type ⑦⑦: Fiber Jacket ⑪⑪: Package Type
850 - 850nm G - Grin Lens B - Bare Fiber 88 - Ø1.4x9 Glass
980 - 980nm C - C Lens F - 900um White Loose Tube 51 - Ø2.78x9 Glass
1064 - 1064nm S - Specify 89 - Ø1.8x10
S - Specify ⑤: Working Distance 40 - Ø3.2x10
1 - 5mm ⑧: Fiber Type 34 - Ø3.2x14
②: Pigtail Type S - Specify 5 - HI 780 S - Specify
S - Single Fiber Pigtail 6 - HI 1060
D - Dual Fiber Pigtail ⑥⑥: Connector Type S - Specify ⑫: Nominal Beam Diameter
1B - FC/UPC 0.5 - 0.5mm
③: Lens Diameter 2B - FC/APC (Step) ⑨: Fiber Orientation S - Specify
1 - 1.8mm 3D - SC/UPC O - O Type (for Single Fiber)
2 - 1.0mm (for Single Fiber only) 4D - SC/APC (Step) V - Vertical (for Dual Fiber)
S - Specify N - None
S - Specify ⑩: Fiber Length
0.8 - 0.8m
S - Specify
Specifications
Values
5
-5 to +70
-40 to +85
0.02
300
850
±20
5
0.3
0.35
55
HI 780 Fiber
980
±20
5
0.25
0.3
Fiber Collimator 9xx~10xxnm 300mW
HI 1060 Fiber HI 1060 Fiber
55
1064
±30
5
0.25
0.3
60
Form No.: D05-230-05 Rev.B
177
CAT-05-014E
Spec No.: CAT-05-014E Date:
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Nominal Beam Diamter mm
Working Distance mm
Typ. Insertion Loss at 50mm dB
Max. Insertion Loss at 50mm dB
Min. Return Loss dB
Typ. Extinction Ratio dB
Min. Extinction Ratio dB
Max. Optical Power (CW) W
Max. Peak Power for ns Pulse kW
Max. Tensile Load N
Operating Temperature ℃
Storage Temperature ℃
Package Dimensions
Ordering Information
HPMC-①①-②②-③③-④-⑤⑤-⑥-⑦-⑧
①①: Wavelength ④: Fiber Jacket ⑥: Fiber Type
06 - 1064nm L - 900um Loose Tube 1 - PM Panda Fiber
SS - Specify C - 3mm Loose Cable S - Specify
A - 3mm Armoured Cable
②②: Beam Diameter S - Specify
04 - 0.4mm ⑦: Fiber Length
05 - 0.5mm ⑤⑤: Handling Power 1.2 - 1.2m
09 - 0.9mm 03 - 3W S - Specify
SS - Specify 05 - 5W
10 - 10W ⑧: Package Type
③③: Working Distance SS - Specify 1 - Dia 3.2*10
50 - 50mm 2 - Dia 3.2*14
SS - Specify
25
0.2~0.4
0.5
50
-40 to +85
22
3、 5、 10 or Specify
5
-5 to +70
10
High Power Polarization Maintaining Fiber Collimator 9xx~10xxnm 10W
50 or Specify
0.4 、0.5 、 0.9 or Specify
Specifications
Values
1064
±20
Form No.: D05-230-05 Rev.A
178
CAT-05-013D
Spec No.: CAT-05-013D Date:
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Nominal Beam Diamter mm
Working Distance mm
Typ. Insertion Loss at 50mm dB
Max. Insertion Loss at 50mm dB
Min. Return Loss dB
Max. PDL dB
Max. Optical Power (CW) W
Max. Peak Power for ns Pulse kW
Max. Tensile Load N
Operating Temperature ℃
Storage Temperature ℃
Package Dimensions
Ordering Information
HC-①①-②②-③③-④-⑤⑤-⑥-⑦-⑧
①①: Wavelength ④: Fiber Jacket ⑥: Fiber Type
06 - 1064nm L - 900um Loose Tube 1 - HI 1060 Fiber
SS - Specify C - 3mm Loose Cable
A - 3mm Armoured Cable ⑦: Fiber Length
②②: Beam Diameter S - Specify 1.5 - 1.5m
04 - 0.4mm S - Specify
05 - 0.5mm ⑤⑤: Handling Power
09 - 0.9mm 03 - 3W ⑧: Package Type
SS - Specify 05 - 5W 1 - Dia 3.2*10
10 - 10W 2 - Dia 3.2*14
③③: Working Distance SS - Specify
50 - 50mm
SS - Specify
50 or Specify
0.2~0.4
0.5
50
0.4 、0.5 、 0.9 or Specify
Specifications
Values
High Power Fiber Collimator 9xx~10xxnm 10W
1064
±20
-40 to +85
0.02
3、 5、 10 or Specify
5
10
-5 to +70
Form No.: D05-230-05 Rev.A
179
CAT-09-011C
Spec No.: CAT-09-011C Date:
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Working Distance mm
Typ. Insertion Loss at 5mm WD dB
Max. Insertion Loss at 5mm WD dB
Min. Return Loss dB
Typ. Extinction Ratio dB
Min. Extinction Ratio dB
Tensile Load N
Max. Optical Power (CW) mW
Fiber Type
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber & connector key are aligned to the slow axis.
*Tolerance of nominal beam diameter is ±10％.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
PMC-①-②-③-④-⑤-⑥⑥-⑦⑦-⑧-⑨-⑩-⑪-⑫-⑬
①: Wavelength ⑥⑥: Connector Type ⑩: Fiber Length
1310 - 1310nm 1B - FC/UPC 0.8 - 0.8m
1550 - 1550nm 2B - FC/APC(Step) S - Specify
S - Specify 3D - SC/UPC
4D - SC/APC(Step) ⑪: Package Dimensions
②: Pigtail Type N - None 40 - Ø3.2x10 Metal
S - Single Fiber S - Specify 51 - Ø2.78x9 Glass
D - Dual Fiber 89 - Ø1.8×9 Metal
⑦⑦: Fiber Jacket 105 - Ø1.4×7 Glass
③: Lens Diameter B - Bare Fiber
1 - 1.8mm C - 900um Red Loose Tube ⑫: ER Level
2 - 1.0mm (for Single Fiber only) B - ≥23dB
S - Specify ⑧:Fiber Type
2B - PM 1310 ⑬: Nominal Beam Diameter
④: Lens Type 3B - PM 1550 0.36 - 0.36mm at 1550nm
G - Grin Lens 0.45 - 0.45mm at 1550nm only for C Lens
C - C Lens ⑨: Fiber Orientation 0.33 - 0.33mm at 1310nm
I - B - T - D - P - E - H - L 0.42 - 0.42mm at 1310nm only for C Lens
⑤: Working Distance O - O Type S - Specify
5 - 5mm
S - Specify
Polarization Maintaining Fiber Collimator 15xxnm 300mW
-40 to +85
5
500
PM Panda Fiber
-5 to +70
25
23
5
Specifications
0.2
0.25
60
Values
1310 or 1550
±30
Form No.: D05-230-05 Rev.B
180
Spec Review No.: SR2108006B Date: Jul. 21, 2023
Specifications
Unit
nm
nm
Nominal Beam Diameter mm
Working Distance (WD) mm
dB
dB
dB
dB
mrad
-
W
N
°C
°C
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMC-①-②②-③-④-⑤⑤-⑥-⑦-⑧
①: Wavelength ④: Fiber Jacket ⑥: Fiber Type ⑧: Package Type
1550 - 1550nm B- Bare Fiber 3A - PM 1550 40 - Ø3.2x10 Metal
C - 900um Red Loose Tube S - Specify 51 - Ø2.78x9 Glass
②②: Beam Diameter SS - Specify S - Specify
045 - 0.45mm ⑦: Fiber Length
⑤⑤: Handling Power 1 - 1.0m
③: Working Distance 01 - 1.0W S - Specify
4 - 4mm S - Specify
S - Specify
High Power Polarization Maintaining Fiber Collimator 15xxnm 10W
4 or Specify
Operating Wavelength Range
Max. Insertion Loss
Operating Temperature
Max. Tensile Load
0.45 ±0.05
Fiber Type PM 1550 Panda Fiber or Specify
Max. Pointing Angle @180mm WD 36 [=ATAN(6.5mm /180mm)]
Storage Temperature
Min. Extinction Ratio
Min. Return Loss
-5 to +70
5
Typ. Extinction Ratio 25
Max. Optical Power (CW)
Parameters
Center Wavelength
-40 to +85
Values
0.25
± 20
1.0 or Specify
1550
23
55
L
~
10±0.1 Form No.D05-203-05 Rev.B
181
CAT-05-018C
Spec No.: CAT-05-018C Date:
Specifications
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Nominal Beam Diamter mm
Working Distance mm
Typ. Insertion Loss at 5mm WD dB
Max. Insertion Loss at 5mm WD dB
Min. Return Loss dB
Max. PDL dB
Max. Optical Power (CW) W
Max. Peak Power for ns Pulse kW
Max. Tensile Load N
Operating Temperature ℃
Storage Temperature ℃
Package Dimensions
Ordering Information
HC-①①-②②-③③-④-⑤⑤-⑥-⑦-⑧
①①: Wavelength ④: Fiber Jacket ⑥: Fiber Type
31 - 1310nm B - 250um Bare Fiber 1 - SMF-28e Fiber
48 - 1480nm L - 900um Loose Tube
55 - 1550nm C - 3mm Loose Cable ⑦: Fiber Length
SS - Specify A - 3mm Armoured Cable 1.5 - 1.5m
S - Specify S - Specify
②②: Beam Diameter
04 - 0.4mm ⑤⑤: Handling Power ⑧: Package Type
05 - 0.5mm 03 - 3W 1 - Dia 3.2*10
SS - Specify 05 - 5W
10 - 10W
③③: Working Distance 20 - 20W
05 - 5mm SS - Specify
SS - Specify
0.3
50
0.02
-40 to +85
3 、 5、 10 or Specify
5
-5 to +70
10
1310, 1480 or 1550
±20
5 or Specify
0.4 、0.5 or Speciry
0.2
High Power Fiber Collimator 15xxnm 10W
Values
Form No.: D05-230-05 Rev.A
182
Spec Review No:SR1801011A Date:Jan.08,2018
Specifications
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Working Distance mm
Typ. Transmission -
Min. Transmission -
Min. Return Loss dB
Typ. Extinction Ratio dB
Min. Extinction Ratio dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Fiber Type -
Operating Temperature ℃
Storage Temperature ℃
Package Dimensions
Ordering Information
PMC-①①-②-③-④-⑤-⑥-⑦-⑧-⑨-⑩-⑾-⑿⑿
①①: Wavelength ⑤: Working Distance ⑦: Fiber Jacket
20 - 2000nm 1 - 5mm B - 250um Bare Fiber
SS - Specify S - Specify L - 900um Loose Tube
S - Specify
②: Pigtail Type ⑥: Connector Type
S - Single Fiber 1 - FC/UPC ⑧: Fiber Length
2 - FC/APC 1 - 1.0m
③: Lens Diameter 3 - SC/UPC S - Specify
1 - 1.8mm 4 - SC/APC
S - Specify N - None ⑨: Package Type
S - Specify 1 - Metal Holder
④: Lens Type 2 - Glass Tube
C - C lens 3 - Metal Holder 14mm
G - Grin lens
98%
95%
Polarization Maintaining Fiber Collimator 19xx~20xxnm 300mW
5 or Specify
Values
2000
±30
50
-40 to +85
23
500
5
-5 to +70
PM 1950 Fiber
25
L
0.02 1.8±0.02
±
14±0.1
0.7-1.0mm
Form No.: D05-203-05 Rev.A
183
Spec Review No: SR2412072A Date: Dec. 17, 2024
Specifications
Unit
nm
nm
mm
mm
-
-
dB
dB
mW
N
℃
℃
*Above specifications are for device without connector
*For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower.
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
C-①-②-③-④-⑤-⑥-⑦-⑧-⑨-⑩-⑪-⑫
①: Wavelength ⑤: Working Distance ⑦: Fiber Jacket ⑩: Fiber Length
1950 - 1950nm 10 - 10mm B - Bare Fiber 1 - 1.0m
2000 - 2000nm S - Specify F - 900um Whtie Loose Tube S - Specify
SS - Specify
②: Pigtail Type ⑥: Connector Type ⑪: Package Type
S - Single Fiber 1B - FC/UPC ⑧: Fiber Type 40 - Ø3.2×10 Metal
2B - FC/APC (Step) 5 - SMF-28e 51 - Ø2.78×9 Glass
③: Lens Diameter 3D - SC/UPC S - Specify
1 - 1.8mm 4D - SC/APC (Step) ⑫: Nominal Beam Diameter
N - None ⑨: Fiber Orientation 0.47 - 0.47mm
④: Lens Type S - Specify O - O Type
C - C-Lens
Operating Temperature
Storage Temperature
Nominal Beam Diameter at WD 0.47 ±0.05
Typ. Transmissivity
Min Transmissivity
Min. Return Loss
Max. PDL
Max. Optical Power (CW)
Max. Tensile Load
95%
55
0.03
-40 to +85
500
5
-5 to +70
Fiber Collimator 19xx~20xxnm 300mW
Values
2000
±30
10 or Specify
98%
Parameters
Center Wavelength
Operating Wavelength Range
Working Distance (WD)
0.1
L
~
10±0.1 Form No.: D05-203-05 Rev.B
184
Spec Review No: SR1310002B Date: Nov. 8, 2024
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Nominal Beam Diameter mm 0.48±0.05 or Specify 0.6±0.05 or Specify
Working Distance (WD) mm
Typ. Insertion Loss at WD dB 0.2~0.4 0.6
Max. Insertion Loss at WD dB 0.5 0.8
Min. Return Loss dB
Typ. Extinction Ratio, 23℃ dB 25 23
Min. Extinction Ratio, 23℃ dB 23 20
Max. Optical Power (CW) W
Max. Peak Power for ns Pulse kW
Fiber Type - PM 1550 PM 1950
Max. Tensile Load N
Operating Temperature ℃
Storage Temperature ℃
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMC-①-②②-③-④-⑤⑤-⑥-⑦-⑧
①: Wavelength ④: Fiber Jacket ⑥: Fiber Type
2000 - 2000nm B - Bare Fiber 3A - PM 1550
S - Specify C - 900um Red Loose Tube B10 - PM 1950
SS - Specify
②②: Beam Diameter ⑦: Fiber Length
048 - 0.48mm ⑤⑤: Handling Power 1 - 1.0m
06 - 0.6mm 03 - 3W S - Specify
S - Specify 05 - 5W
SS - Specify ⑧: Package Type
③: Working Distance 40 - Ø3.2x10 Metal
5 - 5mm 51 - Ø2.78x9 Glass
S - Specify S - Specify
-40 to +85
3, 5 or Specify
5
-5 to +70
5 or Specify
50
High Power Polarization Maintaining Collimator 19xx~20xxnm 10W
Specifications
Values
2000
±50
10
Form No.: D05-203-05 Rev.A
185
Spec Review No.: SR2208016A Date: July. 26, 2022
Specifications
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Nominal Beam Diameter (1/e^2) mm
Min. Beam Ellipticity (X/Y) -
Working Distance (WD) mm
Min. Transmissivity -
Min. Return Loss dB
Max. PDL dB
Max. Optical Average Power W
Max. Optical Peak Power for ns Pulse kW
Max. Tensile Load N
Fiber Type -
Operating Temperature ℃
Storage Temperature ℃
*The material must be RoHS compliant.
Package Dimensions
Ordering Information
HC①①-②-③④-⑤⑤-⑥⑦-⑧
①①: Wavelength ④: Fiber Jacket ⑥: Fiber Type
20 - 2000nm D - 250um Bare Fiber 1 - SMF-28e Fiber
SS - Specify L - 900um Loose Tube
S - Specify ⑦: Fiber Length
②: Beam Diameter 0.8 - 0.8m
0.86 - 0.86mm ⑤⑤: Handling Power S - Specify
S - Specify 01 - 1W
03 - 3W ⑧: Package Type
③: Working Distance 05 - 5W 9 - Dia 3.2*12
200 - 200mm SS - Specify
S - Specify
0.86 ±0.08
95%
5
55
High Power Fiber Collimator 19xx~20xxnm 10W
Values
2000
±30
-5 to +70
200
90%
-40 to +85
0.03
1, 3, 5 or Spesify
5
SMF-28e Fiber
Form NO.:D05-203-05 Rev.B
186
CAT-09-035D
In-line Polarizer 8xxnm 300mW
Spec No.: CAT-09-035D
Unit
nm
nm
dB
dB
dB
dB
dB
dB
mW
N
°C
°C
*Above specifications are for devices without connectors.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower, and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering information
ILP-①-②-③③-④④-⑤-⑥-⑦
①: Wavelength ④④: Fiber Jacket on Port 1 & 2 ⑦: Package Type
850 - 850nm B - 250um Bare Fiber 01 - Ø5.5×35
S - Specify C - 900um Red Loose Tube
F - 900um White Loose Tube
②: Handing Power SS - Specify
0.3 - 0.3W
⑤: Fiber Type on Port 1 & 2
③③: Connector Type on Port 1 & 2 J - PM 850 Panda Fiber
1A - FC/UPC L - HI 780 Fiber
2A - FC/APC S - Specify
3D - SC/UPC
4D - SC/APC ⑥: Fibre Length
N - None 0.8 - 0.8m
S - Specify S - Specify
Storage Temperature
Min. Extinction Ratio at 23°C（Output to Input）
Max. Optical Power (CW)
Max. Tensile Load
Operating Temperature
Operating Wavelength Range
Typ. Insertion Loss at 23°C
Max. Insertion Loss at 23°C
Min. Return Loss
Typ. Extinction Ratio at 23°C（Input to Output）
Min. Extinction Ratio at 23°C（Input to Output）
Date:
Specifications
Parameters
Center Wavelength
-5 to +70
21 (Only for PM Fiber on Input Port)
50
-40 to + 85
300
5
28
Values
0.8
1.0
30
850
± 20
1
Form No.: D05-230-05 Rev.B
187
CAT-09-002D
In-line Polarizer 10xxnm 300mW
Spec No.: CAT-09-002D Date:
Specifications
Parameters Unit Values
Center Wavelength nm 1064
Operating Wavelength Range nm ± 30
Typ. Insertion Loss at 23°C dB 0.4
Max. Insertion Loss at 23°C dB 0.6
Min. Return Loss dB 50
Typ. Extinction Ratio at 23°C（Input to Output） dB 30
Min. Extinction Ratio at 23°C（Input to Output） dB 28
Min. Extinction Ratio at 23°C（Output to Input） dB 22(Only for PM Fiber On Input Port)
Min.PDL(Only for SMF on all ports)@23°C dB 25
Max. Optical Power (CW) mW 300
Max. Tensile Load N 5 5
Operating Temperature °C -5 to +70
Storage Temperature °C -40 to + 85
*Above specifications are for devices without connectors.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower, and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering information
ILP-①-②-③③-④④-⑤-⑥-⑦
①: Wavelength ④④: Fiber Jacket on Port 1 & 2 ⑥: Fibre Length
1064 - 1064nm B - Bare Fiber 0.8 - 0.8m
S - Specify C - 900um Red Loose Tube S - Specify
F - 900um White Loose Tube
②: Handing Power S - Specify ⑦: Package Type
0.3 - 0.3W 01 - Ø5.5×35
⑤: Fiber Type on Port 1 & 2
③③: Connector Type on Port 1 & 2 1A - PM 980 Panda Fiber
1A - FC/UPC 7 - HI 1060 Fiber
2A - FC/APC S - Specify
3D - SC/UPC
4D - SC/APC
N - None
S - Specify
1 2 1 2
Input Output
Form No.: D05-230-05 Rev.B
188
Spec Review No.: SR0806012D Date: May. 16, 2024
Unit
nm
nm
dB
dB
dB
dB
dB
dB
dB
W
N
°C
°C
*Above specifications are for devices without connectors.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering information
HILP-①-②-③③-④④-⑤-⑥-⑦
①: Wavelength ③③: Connector Type on Port 1 & 2 ④④: Fiber Jacket on Port 1 & 2 ⑥: Fibre Length
1064 - 1064nm 1A - FC/UPC B - 250um Bare Fiber 0.8 - 0.8m
2A - FC/APC C - 900um Red Loose Tube S - Specify
②: Handing Power 3D - SC/UPC F - 900um White Loose Tube
1 - 1W 4D - SC/APC S - Specify ⑦: Package Type
5 - 5W N - None 08 - 80×12×10
10 - 10W S - Specify ⑤: Fiber Type on Port 1 & 2
S - Specify 1A - PM980 Fiber
7 - Hi1060 Fiber
S - Specify
In-line Polarizer 10xxnm 10W
Parameters
Center Wavelength
Operating Wavelength Range
Typ. Insertion Loss at 23°C
0.7
1064
±30
Specifications
Values
0.5
23
Max. Insertion Loss at 23°C
Min. Return loss
Typ. Extinction ratio at 23°C
50
-40 to +85
1 or Specify
Operating Temperature
Storage Temperature
Min. Extinction Ratio at 23°C (Output to Input )
30
5
Min.PDL(only for Hi 1060 fiber at all ports)at 23℃ 25
Max. Optical Power (CW)
Max. Tensile Load
Min. Extinction Ratio at 23°C (Input to Output)
-5 to +70
28
Form No.:D05-203-05 Rev.B
189
CAT-09-003E
In-line Polarizer 15xxnm 300mW
Spec No.: CAT-09-003E
Unit
nm
nm
dB
dB
dB
dB
dB
dB
dB
mW
N
-
°C
°C
*Above specifications are for devices without connectors.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering information
ILP-①-②-③③-④④-⑤-⑥-⑦
①: Wavelength ④④: Fiber Jacket on Port 1 & 2 ⑥: Fibre Length
1550 - 1550nm B - 250um Bare Fiber 0.8 - 0.8m
S - Specify C - 900um Red Loose Tube S - Specify
F - 900um White Loose Tube
②: Handing Power S - Specify ⑦: Package Type
0.5 - 0.5W 01 - Ø5.5×35
⑤: Fiber Type on Port 1 & 2
③③: Connector Type on Port 1 & 2 2B - PM1310 Fiber
1B - FC/UPC 3B - PM1550 Fiber
2B - FC/APC 8 - SMF-28e Fiber
3D - SC/UPC S - Specify
4D - SC/APC
N - None
S - Specify
Fiber Type
Operating Temperature
Storage Temperature
Date:
500（Based on proper polarization alignment)
30
1310, 1480 or 1550
±50
Specifications
Values
-5 to +70
28
50
-40 to +85
25
PM Panda Fiber or SMF-28e
Parameters
Center Wavelength
Operating Wavelength Range
Typ. Insertion Loss at 23°C
Max. Insertion Loss at 23°C
Min. Return loss
Typ. Extinction Ratio at 23°C（Input to Output）
0.3
0.5
Min. Extinction Ratio at 23°C（Input to Output）
Min. Extinction Ratio at 23°C（Output to Input）
Min. PDL(Only for SMF on all ports)@23°C
Max. Optical Power (CW)
Max. Tensile Load
23(Only for PM Fiber on Input Port)
5
1
Input Output
Form No.: D05-230-05 Rev.B
190
CAT-05-015D
High Power In-line Polarizer 15xxnm 10W
Spec No.: CAT-05-015D
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Typ. Insertion Loss at 23°C dB
Max. Insertion Loss at 23°C dB
Min. Return loss dB
Typ. Extinction ratio at 23°C （Input to Output） dB
Min. Extinction ratio at 23°C （Input to Output） dB
Min. Extinction Ratio at 23°C（Output to Input） dB
Min.PDL(Only for SMF on all ports)@23°C dB
Max. Optical Power (CW) W
Max. Peak Power for ns Pulse kW
Max. Tensile Load N
Fiber Type -
Operating Temperature °C
Storage Temperature °C
*Above specifications are for devices without connectors.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower,can only handle 1W（CW）power.
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
Package Dimensions
Ordering information
HILP-①①①①-②-③③-④④-⑤-⑥-⑦
①①①①: Wavelength ④④: Fiber Jacket on Port 1 & 2 ⑥: Fibre Length
1550 - 1550nm B - 250um Bare Fiber 0.8 - 0.8m
S - Specify C - 900um Red Loose Tube S - Specify
F - 900um White Loose Tube
②: Handing Power S - Specify ⑦: Package Type
5 - 5W 08 - 80×12×10
⑤: Fiber Type on Port 1 & 2
③③: Connector Type on Port 1 & 2 3A - PM1550 Fiber
1A - FC/UPC 8 - SMF-28e Fiber
2A - FC/APC S - Specify
3D - SC/UPC
4D - SC/APC
N - None
S - Specify
10
0.5
-5 to +70
28
50
-40 to +85
23(Only for PM Fiber on Input Port)
25
5
PM Panda Fiber or SMF-28e
Date：
1, 3, 5,10 or Specify
30
1310, 1480 or 1550
±50
Specifications
Values
0.3
Form No.: D05-230-05 Rev.B
191
CAT-10-019C
In-line Polarizer 19xxnm 300mW
Spec No.: CAT-10-019C
Parameters Unit
Center Wavelength nm
Operating Wavelength Range nm
Typ. Insertion Loss at 23°C dB
Max. Insertion Loss at 23°C dB
Min. Return Loss dB
Typ. Extinction ratio at 23°C dB
Min. Extinction ratio at 23°C dB
Min.PDL(Only for SMF on all ports)@23°C dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Fiber Type -
Operating Temperature °C
Storage Temperature °C
*Above specifications are for devices without connectors.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
Package Dimensions
Ordering information
ILP-①-②②-③③-④-⑤-⑥
①: Wavelength ③③: Fiber Jacket on Port 1 & 2 ⑤: Fibre Length
2000 - 2000nm B - Bare Fiber 0.8 - 0.8m
S - Specify C - 900um Red Loose Tube S - Specify
F - 900um White Loose Tube
②②: Connector Type on Port 1 & 2 S - Specify ⑥: Package Type
1A - FC/UPC 01 - Ø5.5×35
2A - FC/APC ④④: Fiber Type on Port 1 & 2
3D - SC/UPC 8 - SMF-28e Fiber
4D - SC/APC 3B - PM 1550 Fiber
N - None F5 - SM 1950 Fiber
S - Specify B10 - PM 1950 Fiber
S - Specify
22
5
Specifications
Values
0.6
-5 to +70
25
50
-40 to +85
0.8
0.8
1.0
SMF-28e Fiber or PM 1550 Fiber SM 1950 Fiber or PM 1950 Fiber
Date:
500 (Based on proper polarization alignment)
28
2000
±50
Form No.: D05-230-05 Rev.B
192
Spec Review No.: SR2305031A Date: May. 10, 2023
Unit
nm
nm
dB
dB
dB
dB
dB
dB
W
N
-
°C
°C
*Above specifications are for devices without connectors.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower, optical power is only 1W.
* The material must be RoHS compliant.
Package Dimensions
Ordering information
HILP-①①①①-②②-③③-④④-⑤-⑥-⑦
①①①①: Wavelength ④④: Fiber Jacket on Port 1 & 2 ⑥: Fibre Length
2000 - 2000nm B - Bare Fiber 1 - 1m
S - Specify C - 900um Red Loose Tube S - Specify
F - 900um White Loose Tube
②:Handling Power S - Specify ⑦: Package Type
01 - 1W 01 - Ø5.5×35
S - Specify ⑤: Fiber Type on Port 1 & 2
8 - SMF-28e Fiber
③③: Connector Type on Port 1 & 2 3B - PM 1550 Fiber
1B - FC/UPC F5 - SM 1950 Fiber
2B - FC/APC (Step) B10 - PM 1950 Fiber
3B - SC/UPC S - Specify
4B - SC/APC (Step)
N - None
S - Specify
High Power In-line Polarizer 19xxnm 10W
-5 to + 70
25
50
-40 to +85
1 or Specify
28
Max. Insertion Loss at 23°C
Min. Return loss
Specifications
Values
2000
±50
22
5
Parameters
Center Wavelength
Operating Wavelength Range
Typ. Insertion Loss at 23°C
Operating Temperature
Storage Temperature
Typ. Extinction ratio at 23°C (only for Output is PM Fiber)
Min. Extinction ratio at 23°C (only for Output is PM Fiber)
Min. PDL at 23°C (only for Input is SM Fiber)
Max. Optical Power (CW)
SMF-28e Fiber or PM 1550 Fiber SM 1950 Fiber or PM 1950 Fiber
Max. Tensile Load
Fiber Type
0.6
0.8
0.8
1.0
1
Form No.:D05-203-05 Rev.B
193
CAT-09-004C
Isolator Polarization Beam Combiner/Splitter 10xxnm 300mW
Spec No.: CAT-09-004C Date
Parameter Unit
Stage
Center Wavelength nm
Operating Wavelength Range nm
Min. Isolation at 23°C dB
Typ. Isolation dB
Typ. Insertion Loss dB
Max. Insertion Loss dB
Min. Return Loss dB
Min. Directivity dB
Min. Extinction Ratio (for Splitter only) dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Operating Temperature ℃
Storage Temperature ℃
* Above specifications are for device without connector.
* For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower, and ER will be 2dB lower.
* The PM fiber and the connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
IPBC-①-②-③③③-④④④-⑤⑤-⑥-⑦-⑧
IPBS-①-②-③③③-④④④-⑤⑤-⑥-⑦-⑧
①: Wavelength ④④④: Fiber Jacket on Port 1, 2 & 3 ⑥: Axis Alignment on Port 3
1064 - 1064nm B - Bare Fiber 1 - SM Fiber, Align to Port 1 &2 Slow Axis
C - 900um Red Loose Tube (PM Fiber) 2 - PM Fiber, Slow Axis Align 45°to Port 1
②: Stage F - 900um White Loose Tube (SM Fiber) 3 - PM Fiber, Slow Axis Align to Port 1
S - Single Stage SS - Specify 4 - All Ports are SM Fiber
S - Specify
③③③: Connector Type on Port 1, 2 & 3 ⑤⑤: Fiber Type
1B - FC/UPC 03B - Port 1, 2&3: PM980 ⑦: Fiber Length
2B - FC/APC (Step) 11B - Port 1&2: PM980, Port 3: HI1060 0.8 - 0.8m
3D - SC/UPC 18 - Port 1, 2&3: HI1060 S - Specify
4D - SC/APC (Step) S - Specify
N - None ⑧: Package Dimensions
S - Specify 01 - Ø5.5×35
S - Specify
50
-40 to +85
20
300
5
50
-5 to + 50
Specifications
Values
Single stage
1.8
2.1
1064
± 5
25
35
1
Form No.: D05-230-05 Rev.B
194
Spec Review No.: SR2405019B Date: May. 14, 2024
Unit
nm
nm
dB
dB
dB
dB
%
dB
dB
W
kW
N
℃
℃
*Above parameter only for inner core.
* Above specifications are for device without connector.
* For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower,ER will be 2dB lower & handling power will be only 1W(CW)
* The PM fiber and connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMTAPI-①①-②-③③-④④-⑤-⑥-⑦-⑧-⑨
①①: Wavelength ④④: Handling Power ⑦: Fiber Jacket
03 - 1030nm 05 - 5W B - Bare Fiber
S - Specify S - Specify C - 900um Loose Tube
②: Package Type ⑤: Axis Alignment ⑧: Fiber Length
C239 - Type C239 F - Fast Axis Blocked 0.6 - 0.6m
S - Specify
③③: Tap Ratio ⑥: Connector Type
0.3 - 0.3% N - None ⑨: Fiber Type
01 - 1% S - Specify 1 - PM980 Fiber
S - Specify 45 - PLMA-GDF 10/125-M NA0.075 Fiber
65 - Nufern PM1060L 10/125 GSF NA0.085 Fiber
S - Specify
1030 or Specify
Values
0.7
Specifications
Parameters
Center Wavelength (λc)
Operating Wavelength Range ±10
Typ. Excess Loss at λc,23℃
-20 to+75
5
5 or Specify
0 to +50
10
50
1.0
28~33
0.3±0.1 ,01±0.5 or Specify
26
Max. Excess Loss at λc,23℃
Typ. Peak Isolation at λc,23℃
Min. Isolation at λc,23℃
High Power Polarization Maintaining Tap Isolator Hybrid 10xxnm 300mW
Storage Temperature
Min. Return Loss（Input/Output）
Max. Average Power @ Proper SOP
Max. Tensile Load
Operating Temperature
Max. Peak Power for ns Pulse
Tap Ratio at λc,23℃
Min. ER at 23℃（Output） 20
Form No.:D05-203-05 Rev.B
195
Spec Review No.: SR2311086A Date: Nov. 23, 2023
Unit
nm
nm
dB
dB
dB
dB
%
dB
dB
W
kW
N
℃
℃
*Above parameter only for inner core.
* Above specifications are for device without connector.
* For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower,ER will be 2dB lower & handling power will be only 1W(CW)
* The PM fiber and connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
HPMTAPI-①①-②-③③-④④-⑤-⑥⑥⑥-⑦⑦⑦-⑧-⑨⑨⑨
①①: Wavelength ④④: Handling Power ⑦⑦⑦: Fiber Jacket on Port 1/2/3
07 - 1070nm 30 - 30W B - Baer Fiber
S - Specify S - Specify S - Specify
②: Package Type ⑤: Axis Alignment ⑧: Fiber Length on Port 1/2/3
C235 - Type C235 F - Fast Axis Blocked 0.6 - 0.6m
S - Specify
③③: Tap Ratio ⑥⑥⑥: Connector Type on Port 1/2/3
0.3 - 0.3% 1A - FC/UPC ⑨⑨⑨:Fiber Type on Port 1/2/3
S - Specify 2A - FC/APC(Step) S1 - Hi1060 Fiber
N - None 45 - Nufern PLMA-GDF-10/125-M NA0.075 Fiber
S - Specify 63 - Nufern FUD-3270 PM12.5/125 NA0.06 Fiber
S - Specify
-20 to+75
5
30 or Specify
0 to +50
10
High Power Polarization Maintaining Tap Isolator Hybrid 10xxnm 10W
1070 or Specify
Values
0.6
Specifications
Parameters
Center Wavelength (λc)
Operating Wavelength Range ±20
50
Typ. Insertion Loss(λc),23℃, Port 2 to Port 1
Tap Ratio(λc) ,Port 2 to Port 3
Min. ER(only for Port 2 to Port 1) 20
1.0
26
0.3±0.1 or Specify
22
Max. Insertion Loss(λc),23℃, Port 2 to Port 1
Min. Isolation(λc)23℃, Port 1 to Port 2 30
Min. Isolation(λ±10nm)23℃, Port 1 to Port 2
Min. Isolation(λ±20nm)23℃, Port 1 to Port 2
Storage Temperature
Min. Return Loss (only for Port 1 & 2)
Max. Average Power @ Proper SOP
Max. Tensile Load
Operating Temperature
Max. Peak Power for ns Pulse
Form No.:D05-203-05 Rev.B
196
CAT-09-005C
Isolator Polarization Beam Combiner/Splitter 15xxnm 300mW
Spec No.: CAT-09-005C
Parameter Unit
Stage Single stage Dual stage
Center Wavelength nm
Operating Wavelength Range nm
Typ. Insertion loss dB 0.45 0.55
Max. Insertion loss dB 0.7 0.8
Typ. Isolation dB 38 52
Min. Isolation @23℃ dB 20 42
Min. Extinction Ratio (for Splitter only) dB 20 20
Min. Return Loss dB
Min. Directivity dB
Max. Optical Power (CW) mW
Max. Tensile Load N
Fiber Type
Operating Temperature ℃
Storage Temperature ℃
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dB lower.
*The PM fiber and the connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
IPBC-①-②-③③③-④④④-⑤⑤-⑥-⑦-⑧
IPBS-①-②-③③③-④④④-⑤⑤-⑥-⑦-⑧
①: Wavelength ④④④: Fiber Jacket on Port 1, 2 & 3 ⑥: Axis Alignment on Port 3
1310 - 1310nm B - Bare Fiber 1 - SM Fiber, Align to Port 1 &2 Slow Axis
1480 - 1480nm C - 900um Red Loose Tube (PM Fiber) 2 - PM Fiber, Slow Axis Align 45°to Port 1
1550 - 1550nm F - 900um White Loose Tube (SM Fiber) 3 - PM Fiber, Slow Axis Align to Port 1
S - Specify SS - Specify 4 - All Ports are SM Fiber
S - Specify
②: Stage ⑤⑤: Fiber Type
S - Single Stage 05B - Port 1, 2&3: PM1300 ⑦: Fiber Length
D - Dual Stage 06B - Port 1, 2&3: PM14XX 0.8 - 0.8m
07B - Port 1, 2&3: PM1550 S - Specify
③③③: Connector Type on Port 1, 2 & 3 13B - Port 1&2: PM1300, Port 3: SMF-28e
1B - FC/UPC 14B - Port 1&2: PM14XX, Port 3: SMF-28e ⑧: Package Dimensions
2B - FC/APC (Step) 15B - Port 1&2: PM1550, Port 3: SMF-28e 01 - Ø5.5×35
3D - SC/UPC 19 - Port 1, 2&3: SMF-28e S - Specify
4D - SC/APC (Step) S - Specify
N - None
S - Specify
-5 to +70
1310, 1480 or 1550
-40 to +85
Date
Specifications
50
50
Values
500
±40
PM Panda Fiber on Port 1 and 2, SMF-28e Fiber or PM Panda Fiber on Port 3
5
3
1
Form No.: D05-230-05 Rev.B
197
CAT-05-051C
Spec No.: CAT-05-051C
Unit
- Single stage Dual stage
nm
nm
dB 0.65 0.75
dB 0.9 1.0
dB 38 52
dB 20 42
dB 20 20
dB
dB
W
kW
N
℃
℃
* Above specifications are for device without connector.
* For devices with connectors,IL will be 0.3dB higher,RL will be 5dB lower and ER will be 2dB lower and optical power is only 1W(CW).
* The PM fiber and the connector key are aligned to the slow axis.
* The material must be RoHS compliant.
Package Dimensions
Ordering Information
HIPBC-①①-②-③③-④④④-⑤⑤⑤-⑥-⑦
HIPBS-①①-②-③③-④④④-⑤⑤⑤-⑥-⑦
①: Wavelength ④④④: Connector Type on Port 1, 2 & 3 ⑥⑥: Fiber Type ⑦: Axis Alignment on Port 3
1310 - 1310nm 1B - FC/UPC 05B - Port 1, 2&3: PM1300 1 - SM Fiber, Align to Port 1 &2 Slow Axis
1480 - 1480nm 2B - FC/APC (Step) 06B - Port 1, 2&3: PM14XX 2 - PM Fiber, Slow Axis Align 45°to Port 1
1550 - 1550nm 3D - SC/UPC 07B - Port 1, 2&3: PM1550 3 - PM Fiber, Slow Axis Align to Port 1
S - Specify 4D - SC/APC (Step) 13B - Port 1&2: PM1300, Port 3: SMF-28e 4 - All Ports are SM Fiber
N - None 14B - Port 1&2: PM14XX, Port 3: SMF-28e S - Specify
②: Stage S - Specify 15B - Port 1&2: PM1550, Port 3: SMF-28e
S - Single Stage 19 - Port 1, 2&3: SMF-28e ⑧: Fiber Length
D - Dual Stage ⑤⑤⑤: Fiber Jacket on Port 1, 2 & 3 S - Specify 0.8 - 0.8m
B - Bare Fiber S - Specify
③③;Handling Power C - 900um Red Loose Tube (PM Fiber)
01 - 1W F - 900um White Loose Tube (SM Fiber) ⑨: Package Dimensions
SS - Specify SS - Specify 01 - Ø5.5×35
S - Specify
Max. Tensile Load
Operating Temperature
Storage Temperature
Typ. Isolation
Min. Isolation @23℃
Min. Extinction Ratio (for Splitter only)
Min. Directivity
Min. Return Loss
Max. Optical Power (CW)
1310, 1480 or 1550
1, 3, 5 or Specify
10
Parameter
Stage
Center Wavelength
Operating Wavelength Range
Typ. Insertion loss
Max. Insertion loss
Max. Peak Power for ns Pulse
High Power Isolator Polarization Beam Combiner/Splitter 15xxnm 10W
-40 to +85
Date:
Specifications
50
50
Values
±40
5
-5 to +70
Form No.: D05-230-05 Rev.B
198
