配件系列Accessoriesseries

拔叉系列Forkseries

DOORLOCK SERIES

门锁系列WWW.MJWJ.COM.CN

欧标节能平开门系列

Europeanstandard energy-savingdoorseries

配置说明：

1、本配置适用于欧标20槽平开门；
2、单扇门的最佳尺寸为9 0 0mm x 2 2 0 0mm ;
3、合页的承重性能与窗扇的大小及型材的设计有关，具体参数详见合页部分；
4、此款合页夹块必须在型材组装之前将夹块装入型材槽口(可选配后装夹块合页)；
5、建议配合欧式限位撑使用，以达到更佳的开启效果，提高窗户的使用寿命；

Configuration Description:

① Thisconfiguration isapplicable to the open door of the European standard 20 grooves.
② Theoptimumsizeofasingledooris900mm\*2200mm.
③ The bearing capacity of hinge is related to the size of windowsash and the designof profile.
④ Thehingeblockmustbeplacedintothesotofthesectionbeforethesectionisassembled(optionalaftertheclampingblockhinge).
⑤ ItisrecommendedtocooperatewithEuropeanimitbracestoachievebetteropeningeffectandimprovetheservicelifeofwindows.

门锁系列 Doorlockseries

门锁系列 Doorlockseries

门锁系列 Doorlockseries

门锁系列 Doorlockseries

插销系列

MJ-ST-01

MJ-ST-02

MJ-ST-03

锁芯系列

MJ-SX-01
60mm铜锁芯（30×30）
60mmcopper lock core(30×30)
长度可定做
Lengthcustomizable
MJ-SX-02
70mm铜锁芯单开（35×35）
Single opening of 70mmcopperlock core (35×35)
长度可定做
Lengthcustomizable
MJ-SX-03
80mm铜偏芯（45×35)
80mmcopperdeflectorcore (45×35)
长度可定做
Length customizable

锁芯系列Lock series

MJ-SX-04
80mm铜正芯（壳铝芯铜）
80mmcoppercore
(shell aluminumcore copper)
长度可定做
Lengthcustomizable
MJ-SX-05
90mm铜偏芯（60×30)
Coppercore of 90mm (60×30)
长度可定做
Length customizable
MJ-SX-06
110mm铜偏芯（35×75)
110mm copper deflector core (35×75)
长度可定做
Length customizable

铝合金合页系列Aluminumalloyhingeseries

MJ-CHY-01 合页 hinges

1、此合页最大承重50kg/对
2、具体承重能力与合页安装和型材有关
1、Themaximumloadingofhingeis50kg/pair.
2、Thehingeinstalationandmaterialscanaffect
thespecificloading ablility.

MJ-CHY-02
合页
hinges

1、此合页最大承重50kg/对
2、具体承重能力与合页安装和型材有关
1、Themaximumloading of hingeis50kg/pair.
2、The hinge installationand materialscanaffect
the specific loading ablility.

MJ-CHY-03
合页
hinges

1、此合页最大承重35kg/对
2、具体承重能力与合页安装和型材有关
1.Themaximumloadingof hingeis35kg/pair.
2、The hinge installationand materialscanaffect
thespecific loading ablility.

铝合金合页系列Aluminumalloyhingeseries

铝合金合页系列Aluminumalloy hingeseries

铝合金合页系列Aluminumalloyhingeseries

铝合金合页系列Aluminumalloyhingeseries

铝合金合页系列Aluminumalloyhingeseries

MJ-MHY-25 门合页 Door hinges

1、此合页最大承重80kg/3只
2、具体承重能力与合页安装和型材有关
1.Themaximumloading of hingeis80kg/3only
2、The hinge installationand materials can affect
thespecificloading ablity.

MJ-MHY-26 门合页 Door hinges

1、此合页最大承重75kg/3只
2、具体承重能力与合页安装和型材有关
1、The maximum loading of hinge is 75kg/3 only
2、The hingeinstallationandmaterials can affect
the specific loading ablility.

MJ-MHY-27 门合页 Door hinges

1、此合页最大承重75kg/3只
2、具体承重能力与合页安装和型材有关
1、Themaximumloadingof hingeis75kg/3only
2、The hinge installationandmaterialscanaffect
the specific loading ablility.

铝合金合页系列Aluminumalloyhingeseries

MJ-MHY-28 门合页 Door hinges

隐形铰链系列 Invisiblehingeseries

隐形铰链系列 Invisible hingeseries

MJ-YXJL-05 铝合金隐藏铰链 Aluminum hide hinge

1.适用范围：铝合金平开窗
2.此合页最大承重50kg/对
3.建议门窗比例（宽/高）为1：1.5
4.具体承重能力与合页安装和型材有关

1.Application scope: aluminum alloy flat window 2.Themaximum weight ofthis hinge is 50kg/pair 3.Itis recommended that the ratio (width/height) of doors and Windows should be 1:1.5 4.Specific load-bearing capacity is relatedto hinge mounting and profile

MJ-YXJL-06 铝合金隐藏铰链 Aluminum hide hinge

1.适用范围：铝合金平开窗
2.此合页最大承重50kg/对
3.建议门窗比例（宽/高）为1：1.5
4.具体承重能力与合页安装和型材有关

1. Application scope: aluminum alloy flat window 2.Themaximum weight of this hinge is 50kg/pair 3.It isrecommended that the ratio (width/height) of doors and Windows should be 1:1.5 4.Specific load-bearing capacity is related to hinge mounting and profile

多款执手供选择，请参阅下图

For thechoice of a number of hands,please refer to thefollowing figure：

配置说明：

① 本配置适用于普通无槽口型材。
② 滑轮的选用可根据窗户的型材尺寸及承重来选用合适的滑轮。
③ 可根据不同的型材选配五金件，具体配置请与本公司技术服务人员联系。

Configuration Description;

① Thisconfiguration issuitable for ordinary slots.
② The pulleycan be selected according to the size and load of the window.
③ Hardwarecanbeselectedacordingtodiferentprofiles.Pleasecontactourtechnicalservicepersonnelforspecificconfiguration.

推拉钩锁系列Pushandpullhook lockseries

MJ-LS-01
铝型材：拉手
Aluminum profile: handle
MJ-GS-02
1锌：手动条锁
2锌：自动条锁
Zinc: manual bar lock
Zinc:automaticbar lock
MJ-LS-03
拉手套装
Theshakehandshandlesuit

推拉钩锁系列Pushand pull hook lockseries

MJ-SMGS-04
半锌半铝：双面条锁
Half zinc half aluminum:double sidebar lock
MJ-SMGS-05
铝合金：碰锁
Aluminum alloy: latch
分左右
Left and Right
MJ-SMGS-06
T型锁
T lock

塑钢内平开下悬窗系统

Trimthe inner flat down suspension window system

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Please refer to the following figure:

Configuration Description:

配置说明：

① 本配置最大承重60KG.
② 建议窗型比例（高/宽）保持在1.5:1.
③ 当扇宽在430-630mm时，选用配置250#的斜拉杆。
④ 当扇宽在630-830mm时，选用配置350#的斜拉杆。
⑤ 以上配置仅供参考，具体请咨询本公司销售部或技术部。 ① Themaximum load bearing 6oKGof thisconfiguration.
② Itissuggested that thewindowtyperatio (high/wide) bekeptin1.5:1.
③ Whenthefanwidthis430-630mm,thediagonal barwith250#isselected.
④ Whenthe fanwidthis630-830mm,thediagonal barwith350#isselected.
⑤ Theabove configuration is for reference only,please consult the sales departmentorTechnology Department of ourcompany.

塑钢U槽外平开窗系列

Plastic steel U groove outside flatwindow series

Severaldifferenttypesofhandsareavailable.Pleaserefertothe followingfigure:

多款执手可供选择，请参阅下图：

配置说明：

多款铰链可供选择，请参阅下图：

Multiplehingesareavailable,asshownbelow:

Configuration Description:

① 使用外开窗时，建议窗宽不大于700mm。② 选用不同的滑撑承重不一样，具体技术参数请参考滑撑系列，最大承重与窗高宽比及玻璃厚度有关，如有需要应咨询公司技术部。③本配置仅供参考，具体配置要根据型材窗规格而定④为了您和他人的安全，请选配防坠器。

① when using external windows,the recommended windowwidth is not greater than 700mm.
②Select diferent sliding bracing bearing different, specifictechnical parameterspleaserefer tothe sliding support series,themaximumweight and window heightwidthratioand glass thickness,if need to consult the company technology department.
③Thisconfiguration is for reference only.The specific configurationshould be based on the specifications of the profile window.
④For the safety of you and others,please choose the anti falling device.

多款执手可供选择，请参阅下图：

Severaldifferenttypesof handsareavailable.Pleaserefertothefollowing figure:

多款铰链可供选择，请参阅下图：

Multiplehingesareavailable,asshownbelow:

配置说明：

①本配置适用于扇槽高400mm-1600mm，宽400mm-900mm的窗，当窗宽大于700mm时，窗高应大于窗宽，且建议窗型的比例（高/宽）保持在（H）1.5：1（W）。
②本配置最大承重为80kg，最大承重与窗高宽比及玻璃厚度有关。
③本配置仅供参考，具体配置要根据型材及窗规格而定。

Configuration Description:

①Thisconfigurationis suitable for thewindowwith high 400mm-16o0mmand wide400mm-900mm.When thewindowwidthislarger than700mm,thewindow height should be larger than thewindow width,and the ratioof the window type (high/wide) ismaintainedat (H)1.5:1(W).
② Thelargest load-bearingcapacityis8Okg.Themaximumbearingcapacityis related to the height width ratioof thewindowand the thickness of theglass. ③Thisconfiguration is for reference only.The specific configuration depends on the profile and window specifications.

塑钢U槽单点多点锁平开门 U groove single pointmulti-point lock flatdoor

多款执手可供选择，请参阅下图：

Severaldifferenttypesof handsareavailable.Pleaserefer tothe following figure:

多款铰链可供选择，请参阅下图：

Multiplehingesareavailable,asshownbelow:

配置说明：

SQUARE STEEL GRIPSERIES

方钢执手系列

方钢执手系列Square steel grip series

MJ-FGZS-01C
（塑料座、塑料盖、铝柄）
(plasticseat,plasticcover,aluminum handle)

C # >

MJ-FGZS-02C
（铁盖、塑料座、铝柄）
(ironcover,plasticseat,aluminum handle)
MJ-FGZS-03C
(铝座、铁盖、铝柄）
(aluminumseat,ironcover,aluminumhandle)

方钢执手系列Squaresteel gripseries

MJ-FGZS-04C
（铝座、铁盖、铝柄）
(aluminumseat, ironcover,aluminum handle)
MJ-FGZS-05C
(铝座、铁盖、铝柄)
(aluminumseat, ironcover,aluminum handle)
MJ-FGZS-06C
（塑料座、塑料盖、铝柄）
(plastic seat,plasticcover,aluminum handle)

方钢执手系列

MJ-FGZS-07C
（塑料座、塑料盖、铝柄）
(plasticseat,plasticcover,aluminum handle)
MJ-FGZS-08C
（塑料座、塑料盖、铝柄）
(plasticseat,plasticcover,aluminum handle)
MJ-FGZS-09C
（铝座、铁盖、铝柄）
(aluminumseat, ironcover,aluminumhandle)

方钢执手系列

对开传动执手系列Dualdrive gripseries

MJ-DKZS-01
内：全铝
外：全铝
外带锁内带保险对窗执手
within thewhole aluminum
F all aluminum
Outer band lock inner band
insurance on window handle

方钢长度=型材厚度+40mm 螺丝长度=型材厚度+15mm Square steel length =profile thickness +40mm Screw length = profile thickness +15mm

方钢长度=型材厚度+40mm 螺丝长度=型材厚度+15mm Square steel length =profile thickness+40mm Screwlength =profile thickness+15mm

MJ-DKZS-02
内：全铝
外：全铝
外普通内带保险对窗执手
within thewhole aluminum
F all aluminum
General outside with insurance
on the window handle

对开传动执手系列Dualdrive gripseries

MJ-DKZS-03
内：半塑半铝
外：全铝
普通对窗执手
Inside:half plasticand half aluminum
F all aluminum
Hold the window

方钢长度=型材厚度+40mm 螺丝长度=型材厚度+15mm Square steel length =profile thickness +40mm Screwlength =profile thickness +15mm

MJ-DKZS-04
内：半塑半铝
外：半铝半锌
方柄对窗执手
Inside: half plasticand half aluminum
F: half aluminum and half zinc
Square handle towindow handle

方钢长度=型材厚度+30mm 螺丝长度=型材厚度+15mm Square steel length=profile thickness +30mm Screwlength =profile thickness +15mm