MAIJIE HARDWARE

ENTERPRISE INTRODUCTION

企业简介WWW.MJWJ.COM.CN

温州麦杰建筑五金有限公司，创建于1996年，专注生产设计隔热断桥门窗、幕墙门窗、塑钢门窗以及高端加装门窗上的五金配件。

公司自创建以来，一直坚持“开拓进取，求精创优，守信创誉”的经营理念，秉承高质量，严管理的经营方针，不断的制造出各种高品质的门窗五金配件产品供市场需求。为迎合市场的高速发展需求，并引进了国外的先进技术及设备，成功完善的开发出：执手系列、铰链系列、门锁系列、传动器系列、月牙锁系列、上悬、下悬、内倒等优质产品。经过十几年的努力在门窗幕墙五金配件设计制造上积累了丰富的经验，并拥有自己的研发中心，并可根据客户的需要和要求，配合客户成功的开发适合各种铝型材，高质量的五金产品节能环保，人性化的设计，精美的外观，深受广大客户的依赖与推崇。

公司在全国并设有销售服务机构，覆盖到各省、直辖市，并远销到欧美东南亚及中东等国家地区。

公司始终以《成就共享》为完旨服务于长期合作伙伴。请关注麦杰，我们一直在努力！

Wenzhou maijie construction hardware co., LTD.,founded in 1996,specializes in the design of heat insulation broken bridge doorsand Windows,curtain walldoorsand Windows,plastic steel doorsand Windowsaswellas high-end hardwareaccessories foradded doorsand Windows,

Companysince itsinception,alwaysadhere to the"pioneering spirit,refinementmerit,and trustworthy"reputation "business philosophy,adhering tothe high quality,strict managementof themanagement policy, constantly createall kinds of high quality doorsand Windows hardware fitings products for the market demand.To cater to the rapid development of market demand and theintroductionofforeignadvanced technologyand equipment,and successfullycomplete developed:dgeolockesetontocksing on,hanging,and high-qualityproducts such as pourinside.After years of effortson the Windows and doors curtain wall hardwareaccessories design and manufacturing hasaccumulated rich experience,and has its own research and development center,and can according to customer needsand requirements,withthedevelopment of customer successissuitable forall kindsof aluminum, energy conservation and environmental protection high quality hardware products, humanized design, elegant appearance,favored by the majority of customers rely on and praise highly.

Thecompanyalso hassalesservice organizationsin China,coveringprovinces,municipalities directlyunderthecentral govermment,and exported to Europe,America,southeastAsia and the Middle East and other countries and regions. The company has always been committed to "achievement sharing"to serve long-termpartners.Pleasepayattention tomaggie,we have been working hard!

ENTERPRISE TEAM

企业团队WWW.MJWJ.COM.CN

CERTIFICATE OFHONOR

钻孔/攻丝车间

装配车间

传动器装配车间

铆机组

ENTERPRISE WORKSHOP

企业车间WWW.MJWJ.COM.CN

装配车间

麦杰五金门窗配件特点

KeyfeaturesofmetaldoorsandWindows

C20槽防盗锁盒内平开下悬五金系统H款 C20troughanti-theftlockboxflatopen underthehardwaresystemH

内开平窗型材尺寸配合图 Matchingdrawing of profile sizewith internal openingwindow

H款防盗配锁盒内倒安装示意图

Schematicdiagramof invertedinstallationinH anti-theftmatchinglockbox

C20槽锁盒内平开下悬五金系统A款 C20slotlock boxwith flatdown hardwaresystemA

C20槽外平开上悬窗系统

C20 slot outer flat upper suspensionwindowsystem

C20槽中传动内平开下悬五金系统B款C20troughdrive innerflatdownhardwaresystemB幕墙上悬窗多边锁系列

Curtainwall hangingwindowmultilateral lock series

A/B款配锁盒内倒安装示意图 Schematicdiagramofinvertedinstallationina/bmatchinglockbox 幕墙上悬窗两点锁系列 Curtainwall suspendedwindowtwo-point lock series

C款内倒安装示意图 Schematic Diagramof Inverted Installation inSectionC 欧标内平开二点锁系列 Europeanstandard opentwopointlockseries

C20槽内开内倒下悬五金C款C20 trough open inside drop hardware C欧标外平开二点锁系列

Europeanstandard open two point lock series

C20槽内开内倒下悬五金D款 C20 trough open inside drop hardware D

23
25
27
29
31
33
35
38
39
40
43
45
48
63
71

内开微通风Internalmicroventilation

D款内倒安装示意图

ichematic DiagramofInverted Installationin SectionD

外开微通风Externalmicroventilation

E款隐形内倒安装示意图 Einvisibleinverted installationdiagram

防坠器系列 Anti fallingdevice series

C20槽隐形内平开下悬E款

:20 slot invisible inner flat open under suspension Emode

纱窗一体双外开 Windowscreeninonedoubleopen

C20槽隐形配锁盒内平开下悬五金系统F款 C20 slot invisible lock box witha flatopening under hardwaresystemF

纱窗平开系统 Openscreen window system

F款隐形配锁盒内倒安装示意图

SchematicDiagramof Inverted InstallationinFStealth LockMatchingBox

执手系列Handle Series

G款隐形防盗配锁盒内倒安装示意图

G-type invisibleanti-theft lock box insideinverted installationschematic

精装执手系列Hardcoverhandholdseries

C20槽防盗隐形锁盒内平开下悬五金系统G款

C20troughanti-theft invisiblelock boxflat openunder hardware systemG

精装条锁系列Hardcoverbar lockseries

72 隐形执手系列 123推拉钩锁系k lock series
74 七字执手系列 125 塑钢内平开下悬窗系统
Seven-word gripseries Trimtheinner flat down suspension window system
76 防火内开二点配utsideopetwopointlockftin7塑钢U开flatwindowseries
77 防火外开二点锁配件 Fire protection inside and outside open two point lock fitting 129塑钢U槽内平开窗系列
78 锁盒系列x series 131塑钢U槽单点多点锁平开门ociatdoor
83 铝条系列trip series 134方钢执手系列
86 配件系列series 138对开传动执手系列
99 欧标节能平开系列sain or series 142传动杆系od series
101门锁系列 147 塑钢合页系列
Plasticsteel hinge series
106插销系列 149塑钢隐形链系int Series
107锁体系列 Lock system column 150角部铰链系列
108锁芯系列 153滑撑系列
110门锁扣板系列 164推拉窗系列series
111铝合金合页系列e series 166月牙锁系列eries
119隐形链系列es 168锁勾系列okseres
121双扇推拉门door 170滑轮系列

麦杰五金门窗配件特点 AdvantagesofAluminiumDoor&Window Hardware

1.安装便捷、操作方便：
1.Convenient installation,convenient operayion:
所有配件与型材连接均采用夹持式或螺钉禁锢式设计，容易拆装。
Allaccessoriesandprofileconnectionalluseclamping typeorscrewfastening typedesign,easydismounting. 2.具有多方位调节功能：
2.A multi-directional adjusting function:
配件执手、合页可通过调节适用于左、右式门窗。
Adjusting handlesand hingesare applicable to the doorandWindows open in the rightor left.

3.承重力强：
3.Bearing capacity:

配件窗合页最大承重能力60Kg，门合页最大承重能力1 2 0 1 < 9 费Window hinge maximumbearingcapacityis 60kg,door hingesmaximum bearing capacityis 120kg.

4.安全性高：
4.High security:

所有配件力学性能均严格按照国家行业标准进行检测 Allaccessories mechanicalpropertiesarein strictaccordance with the national industrystandard testing.

5.应用广泛：
5.Wide application:

所有配件均可满足当前市场上主流型材的应用。
Allaccessoriescanmeetcurrentmarketmainstreamprofileapplication. 6.产品种类多：
6.Many kinds of products：
当前配件可满足市场上各种不同档次的需求.
Theexistingaccessoriescanmeetthemarketdemandsofdifferentlevels

7.性价比高：
7.Highperformance:

所有配件价格均低于市场上同款式、同材质的品牌配件。
Kairui parts'pricesare lower than other brand with the same designand the same quality. 图册中产品技术参数、图片仅供参考，实际应用以实物为准。
Pleasenote thatallconfigurationsorselectionsof hardwareare forreferenceonly.
图册中五金承载能力与门窗材质，玻璃厚度，高度比例等参数有关，非常规窗型选用时，请与我们技术服务人员联系。
Theloadbearingdepandsonmaterialofdoor&window,theglassthickness,theproportionof heightand widthandotherparameters.Regardingspecialtypeofwindow,plscontactKairuitechnicaldepartment.

内开平窗型材尺寸配合图

Matchingdrawingofprofilesizewithinternal openingwindow

内开平窗型材尺寸配合图

Dimension required of windowframe and sash for Open-in,Side Hung Windows 注明尺寸均为表面处理（电泳、喷涂等）后的完成尺寸。 All specificationareaftersurface treatment.

PVCU-16型材断面尺寸图 Section dimensiondrawing of PVC u-16 profiles

注明： instruction:

铝包木型材断面U-16尺寸图 U-16 dimension drawing of profile section of aluminum clad wood

木包铝型材断面U-16尺寸图 -U-16dimensionof section ofwood-clad aluminum profile

C20槽锁盒内平开下悬五金系统A款 C20slotlockboxwith flatdownhardwaresystem A

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Pleaserefertothefollowing figure:

配置说明：

① 建议锁点分布距离保持在400mm以内。
② 可满足窗扇宽45 _ { 0 - 6 0 0 } {mm } ，窗扇高600-1800mm范围以内的窗型，对于窗扇宽在 600-850mm范围内的窗型配置。
③ 承重力： <= 8 0 1 < 9 . 建议窗型比（高/宽）保持在1.5：1。
\star 高、宽均指窗扇槽口顶到槽口顶的距离。

Configuration Description:

1.It issuggested that the distance of lock point distribution should be within 4 0 0 \mathsf {mm } （20 2.Itcanmeet thewidth of thewindowsash 450-6o0mmand thewindow sash is high 600-180omm.Within the scope of thewindow type,for the width of thewindow sash in the 600-850mm range.Window configuration.
3.Bearingcapacity:lessthan 8oKg.Itissuggested that thewindowtype ratio (high /wide) be kept at1.5:1.
Height and width mean the distance between the top of the window sash and the\ top of the notch.

儿童锁安装图 Child lock installation diagram

C20槽中传动内平开下悬五金系统B款 C20 trough drive inner flat down hardware system B

多款执手可供选择，请参阅下图：

Severaldifferenttypesof handsareavailable.Pleaserefertothefollowing figure:

配置说明：

① 建议锁点分布距离保持在400mm以内。
② 可满足窗扇宽45 _ { 0 - 6 0 0 } {mm } ，窗扇高600-1800mm范围以内的窗型，对于窗扇宽在 600-850mm范围内的窗型配置。
③ 承重力： <= 8 0 1 < 9 . 建议窗型比（高/宽）保持在1.5:1。
\star 高、宽均指窗扇槽口顶到槽口顶的距离。

Configuration Description:

1.It is suggested that the distance of lock point distribution should be within 4 0 0 \mathsf {mm } （20 2.Itcanmeet thewidth of thewindowsash 450-6o0mmand thewindow sash is high 600-180omm.Within the scope of thewindow type,for the width of thewindow sash inthe600-850mm range.Windowconfiguration.
3.Bearingcapacity:less than8oKg.Itissuggested thatthewindow type ratio (high /wide) be kept at1.5:1.
Height and width mean the distance between the top of the window sash and the\ top of the notch.

儿童锁安装图 Child lock installation diagram

C20槽内开内倒下悬五金C款 C20troughopeninsidedrophardwareC

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Pleaserefertothefollowing figure:

配置说明：

① 建议锁点分布距离保持在400mm以内。
② 可满足窗扇宽45 0 . 6 0 0 \mathsf {mm } ，窗扇高600-1800mm范围以内的窗型，对于窗扇宽在 600-850mm范围内的窗型配置。
③ 承重力： <= 8 0 1 < 9 . 建议窗型比（高/宽）保持在1.5:1。
\star 高、宽均指窗扇槽口顶到槽口顶的距离。

Configuration Description:

1.It issuggested that the distance of lock point distribution should be within 4 0 0 \mathsf {mm } （204号 2.Itcanmeet thewidth of thewindowsash 450-6o0mmand thewindow sash is high 600-180omm.Within the scope of thewindow type,for the width of thewindow sash in the 600-850mm range.Window configuration.
3.Bearingcapacity:less than8oKg.Itissuggested thatthewindowtype ratio (high /wide) be kept at1.5:1.
Height and width mean the distance between the top of the window sash and the\ top of the notch.

儿童锁安装图 Child lock installation diagram

C20槽内开内倒下悬五金D款 C20trough openinsidedrop hardwareD

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Pleaserefertothefollowing figure:

配置说明：

① 建议锁点分布距离保持在400mm以内。
② 可满足窗扇宽45 0 . 6 0 0 \mathsf {mm } ，窗扇高600-1800mm范围以内的窗型，对于窗扇宽在 600-850mm范围内的窗型配置。
③ 承重力： <= 8 0 1 < 9 . 建议窗型比（高/宽）保持在1.5：1。
\star 高、宽均指窗扇槽口顶到槽口顶的距离。

Configuration Description:

1.It issuggested that the distance of lock point distribution should be within 4 0 0 \mathsf {mm } （204号 2.Itcanmeet thewidth of thewindowsash 450-6o0mmand thewindow sash is high 600-180omm.Within the scope of thewindow type,for the width of thewindow sash in the 600-850mm range.Window configuration.
3.Bearingcapacity:less than 8oKg.Itissuggested thatthewindowtype ratio (high /wide) be kept at1.5:1.
Height and width mean the distance between the top of the window sash and the\ top of the notch.

儿童锁安装图 Child lock installation diagram

C20槽隐形内平开下悬E款

C20slot invisible innerflatopenundersuspensionEmodel

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Pleasereferto thefollowing figure:

配置说明：

① 建议锁点分布距离保持在400mm以内。
② 可满足窗扇宽45 0 . 6 0 0 \mathsf {mm } ，窗扇高600-1800mm范围以内的窗型，对于窗扇宽在 600-850mm范围内的窗型配置。
③ 承重力：<90Kg。建议窗型比（高/宽）保持在1.5:1。
\star 高、宽均指窗扇槽口顶到槽口顶的距离。

Configuration Description:

1.It is suggested that the distance of lock point distribution should be within 4 0 0 \mathsf {mm } （204号 2.Itcanmeet thewidth of thewindowsash 450-6o0mmand thewindow sash is high 600-180omm.Within the scope of thewindow type,for the width of thewindow sash inthe 600-850mm range.Windowconfiguration.
3.Bearing capacity:less than9oKg.It issuggested that the window type ratio (high /wide) be kept at1.5:1.
Height and width mean the distance between the top of the window sash and the\ top of the notch.

儿童锁安装图 Child lock installation diagram

C20槽隐形配锁盒内平开下悬五金系统F款 C20slot invisible lockboxwitha flatopeningunder hardwaresystemF

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Pleaserefertothefollowing figure:

配置说明：

① 建议锁点分布距离保持在400mm以内。
② 可满足窗扇宽45 _ { 0 - 6 0 0 } {mm } ，窗扇高600-1800mm范围以内的窗型，对于窗扇宽在 600-850mm范围内的窗型配置。
③ 承重力：<90Kg。建议窗型比（高/宽）保持在1.5:1。
\star 高、宽均指窗扇槽口顶到槽口顶的距离。

Configuration Description:

1.It is suggested that the distance of lock point distribution should be within 4 0 0 \mathsf {mm } （204号 2.Itcanmeet thewidth of thewindowsash 450-6o0mmand thewindow sash is high 600-180omm.Within the scope of thewindow type,for the width of thewindow sash inthe600-850mm range.Windowconfiguration.
3.Bearingcapacity:lessthan 9OKg.Itissuggested that thewindowtype ratio (high /wide) be kept at1.5:1.
Height and width mean the distance between the top of the window sash and the\ top of the notch.

儿童锁安装图 Child lock installation diagram

C20槽防盗隐形锁盒内平开下悬五金系统G款 C20troughanti-theft invisiblelockboxflat openunderhardwaresystem G

C20槽防盗隐形锁盒内平开下悬五金系统G款

C20troughanti-theftinvisiblelockboxflat openunderhardwaresystemG

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Pleaserefertothefollowing figure:

配置说明：

① 建议锁点分布距离保持在400mm以内。
② 可满足窗扇宽45 0 . 6 0 0 \mathsf {mm } ，窗扇高600-1800mm范围以内的窗型，对于窗扇宽在 600-850mm范围内的窗型配置。
③ 承重力：<90Kg。建议窗型比（高/宽）保持在1.5:1。
\star 高、宽均指窗扇槽口顶到槽口顶的距离。

Configuration Description:

1.It is suggested that the distance of lock point distribution should be within 4 0 0 \mathsf {mm } （204号 2.Itcanmeet thewidth of thewindowsash 450-6o0mmand thewindow sash is high 600-180omm.Within the scope of thewindow type,for the width of thewindow sash inthe 600-850mm range.Windowconfiguration.
3.Bearing capacity:less than 9oKg.Itissuggested that the window type ratio (high /wide) be kept at1.5:1.
Heightand width mean the distance between the top of the window sash and the\ top of the notch.

儿童锁安装图 Child lock installation diagram

C20槽防盗锁盒内平开下悬五金系统H款

C20槽防盗锁盒内平开下悬五金系统H款

C20 troughanti-theft lockbox flatopen underthehardwaresystemH

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Pleaserefertothefollowing figure:

配置说明：

① 建议锁点分布距离保持在400mm以内。
② 可满足窗扇宽45 0 . 6 0 0 \mathsf {mm } ，窗扇高600-1800mm范围以内的窗型，对于窗扇宽在 600-850mm范围内的窗型配置。
③ 承重力： <= 8 0 1 < 9 . 建议窗型比（高/宽）保持在1.5：1。
\star 高、宽均指窗扇槽口顶到槽口顶的距离。

Configuration Description:

1.It issuggested that the distance of lock point distribution should be within 4 0 0 \mathsf {mm } 2号 2.Itcanmeet thewidth of thewindowsash 450-6o0mmand thewindow sash is high 600-180omm.Within the scope of thewindow type,for the width of thewindow sash in the 600-850mm range.Window configuration.
3.Bearingcapacity:lessthan 8oKg.Itissuggested thatthewindowtype ratio (high /wide) be kept at1.5:1.
Height and width mean the distance between the top of the window sash and the\ top of the notch.

儿童锁安装图 Child lock installation diagram

MAIJIEHARDWARE瑞安市麦杰建筑五金有限公司WWW.MJWJ.COM.CN

C20槽外平开上悬窗系统

C20 slot outer flatupper suspensionwindow system

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Please refer to the following figure:

750-1500mm.★本系统能实现外平开和上悬两种开启方式，根据扇型材的截面不同可选配20/25/30三种传动盒。★本系统中防误操作器、防坠器、伸缩风撑为必配产品。★采用高承重合页，承重可达100kg/对。

sash height750-1500mm
★This system can achieve out ward open and awning two opening types. 20/25/30mm transmission lock boxcan be choose according diferent profile.
★Theanti-mistake device,anti-drop device,sash restrictor belong to necessary products
★Max loading canbe 1ookg/pair when using heavy duty hinge.

幕墙上悬窗多边锁系列

Curtainwallhangingwindowmultilateral lockseries

多款执手可供选择，请参阅下图：

Severaldifferenttypesof handsareavailable.Pleaserefer tothe following figure:

配置说明：

① 6点以上锁闭，可在传动杆上增加活动锁点(本配置适用于扇边为欧标20槽口的型材)。
② 选用不同的摩擦铰链承重亦不同。具体技术请参阅本图册。
③ 大窗型选配风撑有助提升窗户安全，分担摩擦铰链承重。
④ 窗扇开启最大极限距离300mm时，扇高应小于1200mm。
⑤ 以上配置仅供参考，具体请咨询本公司销售部或技术部。
⑥ 为了您和他人的安全，请选配防坠器。

Configuration Description:

① More than6locking,youcanadd active lock pointson the drive rod (this configuration
is suitable forthe section with fanedge for Euro 20 notch).
② Theweightbearing of thedifferentfriction hingeisalso different.For specific techniques,
please referto the book.
③ Thelarge window type wind bracing can helpto improve the safety of windowsand share
the load of friction hinges.
④ Whenthewindowisopened atthe maximumlimitof 300mm,thefanheight should belessthan1200mm. ⑤ Theaboveconfiguration isforreferenceonly,pleaseconsult thesalesdepartment or
Technology Department of our company.
⑥ Forthe safety of you and others,pleasechoose the anti falling device.

幕墙上悬窗两点锁系列

Curtainwall suspendedwindowtwo-pointlock series

Several differenttypesof handsareavailable.Pleaserefertothefollowing figure:

多款执手可供选择，请参阅下图：

① 选用不同的摩擦铰链承重亦不同。具体技术请参阅本图册滑撑系列。② 大窗型选配风撑有助提升窗户安全，分担摩擦铰链承重，建议选装防脱装置（防坠器）。③ 窗扇开启最大极限距离300mm时，扇高应不小于1200mm。④ 以上配置仅供参考，具体请咨询本公司销售部或技术部。

配置说明：

Configuration Description:

① The weight bearing of the different friction hinge isalso different.Forspecific techniques, pleaserefertotheseriesof slipperybracesinthisalbum.
② Thelarge window type wind bracing can help to improve thesafety of windowsand share theload offriction hinges.Itisrecommended toinstallantidropping devices (antifaling devices). ③ Fan height should notbe less than1200mm when windowsash opens themaximumlimit 300mm. ④ Theabove configurationisforreferenceonly,please consult thesalesdepartmentorTechnology Department of our company.

欧标内平开二点锁系列

Europeanstandard open two point lock series

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Pleasereferto thefollowing figure:

多款铰链可供选择，请参阅下图：

Multiplehingesareavailable,asshownbelow:

配置说明：

① 客户可根据图册选配喜好的执手。
② 铰链承重性能请参阅本图册铰链系列，合页的承重性能与窗扇的大小及型材的设计有关。
③ 微通风装置的使用可以增加安全系数（特别是儿童房间），也可使室内空气循环。
★选用欧标铰链一定要配上定位风撑一起使用。

Configuration Description:

① Customers can choose the preference according to the album.
② Pleaserefer to the hinge seriesof thisalbum.Thebearing capacity of the hinge is related to the size of the window sashand the design of theprofile.
③ Theuseofmicroventilatorcan increase thesafetyfactor,especiallyinchildren'sroom, and also make indoor air circulation.
\star Select the European standard hinge must be equipped with the positioning wind braces together.

欧标外平开二点锁系列

Europeanstandard open two point lock series

多款执手可供选择，请参阅下图：

Several differenttypesof handsareavailable.Pleaserefer to the following figure:

配置说明：

① 客户可根据图册选配喜好的执手。
② 铰链承重性能请参阅本图册铰链系列，最大承重与窗高宽比及玻璃厚度有关，如有需要可咨询公司技术人员。
③ 微通风装置的使用可以增加安全系数（特别是儿童房间），也可使室内空气循环。
④ 外开窗不建议安装合页。
⑤ 为了您和他人的安全请选配防坠器（根据槽口型材选用不同产品）。

Configuration Description:

① Thecustomer can choose the preference according to the album.
② Hingloadearnefoaeeosisdadtoitid Consult company technicians if necessary.
③ Theuseofmicroventilatorcanicreasethesetyfctospeciallinidren'sroom,andalsomakeindoorairiculation
④ Outsidewindowisnot recommended to install hinge.
⑤ Forthesafetyofyouandotherspleasechoosetheantifallngdevice(accordingtothediferentshapesofthenotchsection).

MICRO VENTILATION

微通风WWW.MJWJ.COM.CN