C.H.Tech工业工具目录 - 电子画册在线预览、各类电子画册在线制作-云展网平台

Insertspecification

Partnumber	Material						Size
	CVD			PVD			IC	S	r	d
					CCK115B CCP340B CPA025B CPA220B CPA225B CPH125B
SNGX160612EN-M	·	·	·	·	： ·	。	16 ··	7.7 ....	1.2	6

Note:·have stock 0 forreservation

Recommended cutting conditions

Workpiecematerial		Hardness	Inserial	Cutin/minged	Feedmrblade
P	Carbon steel、Alloy steel (S45C、SCM440 and so on)	HB180-350	CCP340B	200(150-250)	0.20(0.15-0.25)
P	Carbon steel、Alloy steel (S45C、SCM440 and so on)	HB180-350	CPA025B	120(80-160)	0.20(0.15-0.25)
M	(SsUs304ntsusaileand se (n)	≤HB200	CPA225B	120(70-160)	0.18(0.13-0.22)
M	Austeniticstainlesssteel (SUS304LN、SUS316LNandsoon)	>HB200	CPA225B	100(60-140)	0.18(0.13-0.22)
K	(FC3o an itcon)	≤350MPa	CCK115B	220(200-270)	0.20(0.15-0.25)
	(FC3o an itcon)	≤350MPa	CPA225B	180(130-250)	0.20(0.15-0.25)
	Nodular cast iron (FCD700 and so on)	≤800MPa		CCK115B	200(150-250)	0.20(0.15-0.25)
CPA225B	Nodular cast iron (FCD700 and so on)	≤800MPa		180(130-250)	0.20(0.15-0.25)
H	(SKD61、 skT4and so on)	HRC40-50	CPA025B	50(30-70)	0.08(0.05-0.12)
H	(SKD61、 skT4and so on)	HRC40-50	CPH125B	80(60-100)	0.08(0.05-0.12)

4048 Face milling seriest

Productfeature

Lead Angle: 8 8 ^ { \circ }

Maximum cutting depth:11mm、 1 4 . 5 \ : {mm }

Enlargedand thickened insert,strengthened thecuting edge,toensure thestrengthoftheproduct.
Double-sided8corners indexable insert,suitable fordifferent leadangle cutting tools.
Positive corner chip breaker with stable indexable insert,to ensure the highest producing efficiency.

Milling cutterspecification

Partnumber	Size						Inserts	Screw	Wrench	Inventory
Partnumber	D	d	L	L1	T	(max)	Inserts	Screw	Wrench	Inventory
4048.B.050.Z04.06-22	50	22	40	21	4	11			T15
4048.B.063.Z05.06-22	63	22	40	21	5 5					·
4048.B.063.Z05.06-25.4	63	25.4	40	21						。
4048.B.080.Z06.06-25.4	80 80	25.4 27	50 50	25	SNMX1205:TS4015					。
4048.B.080.Z06.06-27	100	31.75	50	25	11					·
4048.B.100.Z07.06-31.75 4048.B.100.Z11.06-31.75	100	31.75	50	25 25						·
4048.B.125.Z08.06-38.1	125	38.1	63							·
	125	40	63	38 38						。
4048.B.125.Z08.06-40		22	40	20	8 4					。
4048.A.063.Z04.08-22 *	63	22	40	20	5	S5012- SNGX1606 A55-1		。
4048.A.063.Z05.08-22 * 4048.A.080.Z05.08-27 *	63 80	27	50	22	5			。
4048.A.080.Z06.08-27 *	80	27	50	22	6
4048.B.100.Z06.08-32 *	100	32	50	25	6			。
4048.B.100.Z08.08-32*	100	32	50	25				。
4048.B.125.Z08.06-40 *	125	40	63	28	8			。
	200	60	63		8			。
4048.C.200.Z12.08-60 *				32	12			。
4048.C.250.Z14.08-60 *	250	60	63	32	14

Note:·havestockoforreservation \*\*"represents customized product.

Insertspecification

Partnumber	Material					Size
	CVD			PVD			S	r		d
	CCP125B	CCP330B	CCK115B	CPA025B	CPA225B		S	r		d
SNMX120512-M	。	。	。	·	。	12.7	6.2	1.2		6
SNEU1206ZNN-M	·	。	·	·	·	12.7	6.2		0.8	6
SNGX160612EN-M				·		16	• • 7.7	1.2		6

Note:·have stock 0 forreservation SNEU1206ZNN-Misa polishing insert

Recommendedcuttingconditions

Workpiecematerial		Hardness	Insert material	Cutting speed (m/min)	Feedperblade (mm/t)
P	Carbon steel、Alloy steel (S45C、SCM440and so on)	HB180-350	CCP330B	200(150-250)	0.20(0.15-0.25)
P	Carbon steel、Alloy steel (S45C、SCM440and so on)	HB180-350	CPA025B	120(80-160)	0.20(0.15-0.25)
M	Austenitic stainless steel (SUS304、SUS316 and so on)	≤HB200	CPA225B	120(70-160)	0.18(0.13-0.22)
M	Austeniticstainlesssteel (SUS304LN、SUS316LNand soon)	>HB200	CPA225B	100(60-140)	0.18(0.13-0.22)
K	Grey cast iron (FC300 and so on)	≤350MPa	CCK115B	220(200-270)	0.20(0.15-0.25)
	Grey cast iron (FC300 and so on)	≤350MPa	CPA225B	180(130-250)	0.20(0. 15-0.25)
	Nodular cast iron (FCD700 and so on)	≤800MPa	CCK115B	200(150-250)	0.20(0.15-0.25)
CPA225B	Nodular cast iron (FCD700 and so on)	≤800MPa	180(130-250)	0.20(0.15-0.25)
H	High hardnesssteel (SKD61、SKT4and so on)	HRC40-50	CPA025B	50(30-70)	0.08(0.05-0.12)

Product feature

Lead Angle: 9 0 ^ { \circ } （204号
Maximum cutting depth:8 mm
Tool interface:themetric interface
Diameter:Φ50-Φ315mm
Cuting fast by special cutting edge design of large rake angle.
G grade precision,leftand right universal insert.
Thecontactsurfaceofthe insertpositioning is large,and the increase of thicknessimproves thecollapse strength. High economy double-sided6 corners insert.

Milling cutter specification

Partnumber	Size						Inserts	Screw	Wrench	Inventory
Partnumber	D	d	L	L1	T	(max)	Inserts	Screw	Wrench	Inventory
CMFWN90063R-4T	63	22	40	21	4		WNGU080608N-GM:S5012-A55-1	T20	.
CMFWN90063R-5T	63	22	40	21	5				·
CMFWN90080R-5T	80	27	50	26.5	5
CMFWN90080R-7T	80	27	50	26.5	7				·
CMFWN90100R-7T	100	32	50	30	7
CMFWN90125R-8T	125	40	63	33	8				·
CMFWN90160R-10T	160	40	63	32	10			·
CMFWN90200R-12T:	200	60	63	40	12			·
CMFWN90250R-14T	250	60	63	40	14				。

Note:·have stockoforreservation

Insertspecification

Partnumber	Material				Size
	PVD			CVD	A	S	r	d
	CPA025B	CPA220B	CPA225B	CCK125B
WNGU080608N-GM		..... ·	·		14.03	.... 8.28	0.8	..... 6.17

Note:·havestockoforreservation

Recommendedcuttingconditions

	Workpiecematerial	Hardness	Insert material	Cutting speed (m/min)	Feedperblade (mm/t)
P	Carbon steel (SS400、S10C and so on）	HB200-300	CPA025B	180(120-250)	0.2(0.1-0.3)
	Alloystel (SCMand so on)	HB150-300	CPA025B	180(100-220)	0.2(0.1-0.3)
	Die steel (SKD、NAK and so on)	≤HB300	CPA025B	140(80-180)	0.15(0.1-0.25)
M	Stainless steel (SUS304、SUS316 and so on)		CPA225B	150(100-200)	0.15(0.1-0.25)
M	Stainless steel (SUS304、SUS316 and so on)		CPA220B	150(100-200)	0.15(0.1-0.25)
K	Grey cast iron （FC300 and so on）	Tensile strength ≤350MPa	CCK125B	220(200-270)	0.2(0.15-0.25)
	Grey cast iron （FC300 and so on）	Tensile strength ≤350MPa	CPA225B	180(120-250)	0.2(0.1-0.3)
	Nodularcast iron (FCD450and so on)	Tensile strength ≤450MPa	CCK125B	220(150-250)	0.2(0.15-0.25)
CPA225B	Nodularcast iron (FCD450and so on)	Tensile strength ≤450MPa	150(100-200)	0.15(0.1-0.25)

AN90 Shoulder facing milling product

Productfeature

9 0 ^ { \circ } shoulder miling with double helix cutting edge,suitable forallsizes of face,shoulder,slot.
Thickened insert design,strong enough for high feed miling.
Thedovetailchipbreakerdesignndcombinedwiththefinishingedgeinsert,couldachievethehighprecisionmilingsuface. Lockingbyrightanglescrew,andthecontactsurfaceislargerandmorestable,toensurehigherclampingrigidityandaccuracy. Dense tooth design,combined with the low cuting resistance design,high processing efficiency.
Double-sided4cornersdesign,highprecision,eficientandeconomical.
Milling shank diameter: 16-40 m m$ （20
Milling cutter diameter:φ40-250mm

Milling shank specification

Partnumber	Size						Inserts	Screw	Wrench	Inventory
Partnumber	D	d	T	H	L	(max)	Inserts	Screw	Wrench	Inventory
ANE9016R02D16AN09L125	16	16	2		26 125		ANKT090408	S3007-SA	T8	。
ANE9020R03D20AN09L125	20	20	3	26	125	7.5				。
ANE9025R04D25AN09L125	25	25	4	26	125					。
ANE9025R02D25AN12L125	25	25	2	26	125	12.5			T15
ANE9032R03D32AN12L160	32	32	3	26	160	ANKT120508S4012-SA			T15	。
ANE9040R04D40AN12L200	40	40	4		26	200

Note:·have stock oforreservation

Milling cutter specification

Insertspecification

Partnumber	Size						Inserts	Screw	Wrench	Inventory
Partnumber	D	d	L	L1		(max) T	Inserts	Screw	Wrench	Inventory
ANF90-40R04AN12A16	40	16	40		15	4	12.5 ANKT120508			·
ANF90-50R05AN12A22	50	22	50	20	5					·
ANF90-63R06AN12A27	63	27	50	22	6	S4012-SA
ANF90-80R07AN12A27	80	27	50	22	7	T15				.
ANF90-100R09AN12B32	100	32	50	25	9
ANF90-200R10AN12C60	200	60 16		63	28	10			·
ANF90-40R03AN17A16 ANF90-50R04AN17A22	40 50	22		40 50	15 3 20				。。
ANF90-63R06AN17A27	63	27	50	22	4 6				。
ANF90-80R07AN17A27	80	27	50	22	7
ANF90-100R08AN17B32	100	32	50	25	8	15.5			。
ANF90-125R10AN17B40	125	40	63		28 10	ANKT170608			。
ANF90-160R12AN17B40	160	40	63		28				。
ANF90-200R10AN17C60	200	60		63	32	12 10		0	。
ANF90-250R12AN17C60					32
	250	60		63		12			。

Partnumber	Material	Size
	PVD	A	B	F	S
	CPA025B	A	B	F	S
ANKT090408-M	·	8.6	6.6	2.5	0.8	5.2
ANKT120508-M	·	13.7	10	3.8	0.8	9.15
ANKT170608-M ....	·	16.7	： 11.2	4.7 ...	0.8	10.4

Note:·have stock 0 forreservation

Recommendedcuttingconditions

	Workpiecematerial	Hardness	Insert material	Cutting speed (m/min)	Feedperblade (mm/t)
P	Low-carbon steel (S15C、C15C and so on)	≤HB180	CPA025B	160(120-180)	0.1 (0.05-0.15)
	High-carbonsteel (S45C、C45、S55Cand soon)	HB200-300	CPA025B	120(100-160)	0.08 (0.05-0.1)
	Alloysteel (SCM440、42CrMo4 and so on)	HB150-300	CPA025B	100(80-120)	0.08 (0.05-0.1)
	Diesteel (SKD11 and soon)	≤HB300	CPA025B	90 (80-110)	0.08 (0.05-0.1)
M	Stainlesssteel (SUS304、X5CrMoV12and so on)		CPA025B	100 (80-120)	0.15 (0.1-0.25)
K	Greycast iron (FC250and so on)	Tensilestrength ≤350MPa	CPA025B	180(150-200）	0.15 (0.1-0.2)
	Nodular cast iron (FCD450and so on)	Tensile strength ≤450MPa	CPA025B	160 (120-180)	0.15 (0.1-0.2)
	Nodularcast iron (FCD500 and so on)	Tensilestrength ≤500-800MPa	CPA025B	140(130-150)	0.1 (0.05-0.15)

LNF

Facingmillingseriesproducts

Productfeature

Various insertsareavailable for processing different materialsand working conditions.
Standing inserts constructure could achieve large cuting depth,high metal removal rate.
Widely used inautomobile,machine tool,shipand other industries.

Main Angle: 9 0 ^ { \circ }

Maximum cutting depth:5mm(LN11);7mm(LN15) Diameterrange:Φ40-Φ250mm

Millingcutterspecification

Partnumber	Size							Inserts	Screw	WrenchInventory
Partnumber	D	D1	d	L		T	（max)	Inserts	Screw	WrenchInventory
LNFA90-040R04LN11-A16	40		38.4	16	40	4					。
LNFA90-040R06LN11-A16		40	38.4 16		40	6					。
LNFA90-050R05LN11-A22		50	47	22	40	5					。
LNFA90-050R07LN11-A22	50	47	22	40		7					。
LNFA90-063R06LN11-A22	63	59.2	22	40		6					。
LNFA90-063R09LN11-A22	63	59.2	22	40		9	TS3508				。
LNFA90-080R08LN11-B27	80	70	27		50	8	5				。 T10
LNFA90-080R11LN11-B27	80	70	27		50	11	LN11				。
LNFA90-100R09LN11-B32	100	77	32	50		9					。
LNFA90-100R14LN11-B32	100	77	32	50		14					。
LNFA90-125R10LN11-B40	125	95	40	63		10					。
LNFA90-125R18LN11-B40	125	95	40		63	18			。
LNFA90-160R12LN11-C40	160	120	40		63	12			。
LNFA90-200R15LN11-C60	200	135	60		63	15			。
LNFA90-250R20LN11-C60	250	150	60	63		20			。

Note:·have stock 0 forreservation

Milling cutter specification

										D1
											d
												de
											D

Partnumber LNFA90-050R05LN15-A22							(max)							Inserts	Screw	Wrench	Inventory 。
Partnumber LNFA90-050R05LN15-A22							D	D1	47	d 22	L	T		Inserts	Screw	Wrench	Inventory 。
LNFA90-063R05LN15-A22							50		59.2	22		40 40	5 5				。。
							63 63		59.2	22		40	8	：			。
LNFA90-080R07LN15-B27							80	70		27	50	7
	80		70	27
LNFA90-080R10LN15-B27			78		50	10		。
LNFA90-100R08LN15-B32	100			32	50	8		。。
LNFA90-100R12LN15-B32	100	78		32	50		12	7	TS4010	T15
LNFA90-125R09LN15-B40	125		95	40	63		9	LN15			。
LNFA90-125R15LN15-B40	125		95	40	63		15				。
LNFA90-160R10LN15-C40	160		120	40	63		10				。
LNFA90-160R20LN15-C40	160	120		40	63		20				。
LNFA90-200R12LN15-C60	200	135		60	63		12				。
LNFA90-200R20LN15-C60	200	135		60	63		20				。
LNFA90-250R15LN15-C60	250	150		60	63		15				。
	250	150		60	63		30
LNFA90-250R30LN15-C60									。

Note:·havestockoforreservation

Insertspecification

Partnumber	Material	Size
	PVD	A	B	S	r	ap
	CPA325B	A	B	S	r	ap
LNMT1106PNTR-M	. ·	11.16	11	. 6	0.8	. 5
LNKX1506PN-M	·	; 15 ......	13.88	... 6 .....	0.8	..... 7

Note:·have stock 0 forreservation

Cuttingedgedescription

PNTR-M/PN-M

Recommended cutting conditions

	Workpiecematerial	Hardness	Insertmaterial	Cutting speed (m/min)	Feedperblade (mm/t)
P	lowcarbonsteel	≤HB180	CPA325B	220(180-230)	0.25 (0.1-0.4)
	Carbon steel	HB180-280	CPA325B	180(160-210)	0.25 (0.1-0.4)
	Alloy steel	HB280-350	CPA325B	150(120-180)	0.25 (0.1-0.4)
M	Stainless steel	≤HB275	CPA325B	120(100-150)	0.15 (0.1-0.3)
K	Grey cast iron	≤HB350	CPA325B	130(90-170)	0.25 (0.1-0.4)
K	Nodularcastiron	≤HB350	CPA325B	180(140-250)	0.25 (0.1-0.4)
S	high temperature alloy、titanium alloy	HRC25-35	CPA325B	40(30-60)	0.2 (0.1-0.3)

Carbideendmill

Endmill for Titanium Alloy ..B032
Cornerradiusendmill forTitaniumAlloy ..B033
Endmill forstainlesssteel (3flutes) .B034
End millfor stainless steel (4 flutes) .B035

Endmill for Titanium Alloy

Productfeature

Suitable for slotand facemilling of aerospace titaniumalloy,heat-resistant alloy andotherdifficultmaterials.

Large helical Angle structure design,sharp cutting edge,low cutting resistance, cutting chip removal smoothly.

Partnumber	Re	Dc	Ds	Lc	L
CTIE4-04D0030L050	： 0.06	3	4	12	50
CTIE4-06D0040L050	0.08	4	6	12	50
CTIE4-06D0050L050	0.10	5	6	15	50
CTIE4-06D0060L050	0.12	6	6	18	50
CTIE4-08D0080L060	0.16	8	8	23	60
CTIE4-10D0100L075	0.20	10	10	26	75
CTIE4-12D0120L075	0.24	12	12	32	75
CTIE4-16D0160L100	..** 0.32	16	16	42	100
CTIE4-20D0200L100	0.40 ·.·.	20	20 ：	52	100

Note:Thisproduct is pre-order,the MOQis5 pcs.

Corner radius end mill for Titanium Alloy

Productfeature

Suitable for slot and face milingof aerospace titaniumalloy, heat-resistant alloy andotherdifficultmaterials.

Largehelical Angle structuredesign,sharpcutting edge,lowcutting resistance, cuttingchipremoval smoothly.

Partnumber	Re	Dc	Ds	Lc	L
CTIR4-04D0020R05	0.5	2	： 4	： 4	。。 45
CTIR4-04D0030R05	0.5 .	3 :	4	5.5	45
CTIR4-06D0040R05	0.5	. 4	6 ：	7	50
CTIR4-06D0040R10	1.0 ...	4 :	6 ,	7	50
CTIR4-06D0060R05	0.5	6	6 ：	10	50
CTIR4-06D0060R10	1.0	6	6	10	50
CTIR4-08D0080R05	0.5	8	8	13	55
CTIR4-08D0080R10	1.0	8	8	13	55
CTIR4-10D0100R04	0.4	10 ：	10	16	65
CTIR4-10D0100R10	1.0	10	10	16	65
CTIR4-10D0100R20	2.0	10	10	16	65
CTIR4-12D0120R06	0.6	12	12	19	78
CTIR4-12D0120R10	1.0	12	12	19	78
CTIR4-12D0120R20	2.0	12	12 ,	19	78
CTIR4-12D0120R30	3.0	12	12 ：	19	78

Note:Thisproduct ispre-order,theMOQis5pcs.

End mill for stainless steel (3 flutes)

Partnumber	D	d	Aplmax	L	Inventory
			：		50series
CSUSE3-04D0010	1	··· 4	3 4	50	。
CSUSE3-04D0015	1.5	4 ：	6	50 50	。
CSUSE3-04D0020	2 2.5	4 4	7	50	。
CSUSE3-04D0025	3	4	8	50	。
CSUSE3-04D0030	3.5	4	10	50	。
CSUSE3-04D0035 CSUSE3-04D0040	4	4	11	50	。
CSUSE3-06D0045	4.5	6	13	50	。
CSUSE3-06D0050	5	6	13	50	。
CSUSE3-06D0055	5.5	6	13	50	。
CSUSE3-06D0060	6	6	15	50
CSUSE3-08D0065	6.5	8	17	60	。。
CSUSE3-08D0070	7	8	17	60	。
CSUSE3-08D0075	7.5	8	17	60	。
CSUSE3-08D0080	8	8	20	60	。
CSUSE3-10D0085	8.5	10	23	75
CSUSE3-10D0090	9	10	23	75	。
CSUSE3-10D0095	9.5	10	25	75	。
CSUSE3-10D0100	10	10	25	75	。
CSUSE3-12D0105	10.5	12	25	75	。
CSUSE3-12D0110	11	12	28	75	。
CSUSE3-12D0115	11.5	12	28	75	。
CSUSE3-12D0120	12	··· • 12	30	75	。
CSUSE3-16D0130	13	16	33	100	。
CSUSE3-16D0140	14	16	35	100	。
CSUSE3-16D0150	15	16	38	100	。
CSUSE3-16D0160	16	16	40	100	。
CSUSE3-20D0170	17	20	40	100
CSUSE3-20D0180	18	20	40		。
CSUSE3-20D0190	19	: 20	40	100 100	。
CSUSE3-20D0200	： 20	20 ：	40 ：	100	。 0

Tolerance

D sizerange	Dtolerance	dtolerance
Φ1.0-Φ2.9	0/-0.02 .·.	h6
Φ3.0-Φ6.4	-0.01/-0.03
Φ6.5-Φ10.9	-0.01/-0.035
Φ11.0-Φ16.5 Φ17.0-Φ20.0	-0.01/-0.04 -0.015/-0.045

Note:·have stock 0 forreservation，minimumorderis5pieces

End mill for stainless steel (4 flutes)

Partnumber	D	d	Aplmax	L	Inventory
		···			50series
CSUSE4-04D0010	1	4 ：	3 4	50	··· ·
CSUSE4-04D0015	1.5	4 4	6	50 50	·
CSUSE4-04D0020	2	4	7		·
CSUSE4-04D0025	2.5 3	4	8	50 50	·
CSUSE4-04D0030	3.5	4	10	50	·
CSUSE4-04D0035 CSUSE4-04D0040	4	4	11	50	。
CSUSE4-06D0045	4.5	6	13	50	·
CSUSE4-06D0050	5	6	13	50	。
CSUSE4-06D0055	5.5	6	13	50	·
CSUSE4-06D0060	6	6	15	50	。
CSUSE4-08D0065	6.5	8	17	60	· 。
CSUSE4-08D0070	7	8	17	60	。
CSUSE4-08D0075	7.5	8	17	60	。
CSUSE4-08D0080	8	8	20	60	·
CSUSE4-10D0085	8.5	10	23	75	。
CSUSE4-10D0090	9	10	23	75	。
CSUSE4-10D0095	9.5	10	25	75	。
CSUSE4-10D0100	10	10	25	75	·
CSUSE4-12D0105	10.5	12	25	75	。
CSUSE4-12D0110	11	12	28	75	。
CSUSE4-12D0115	11.5	12	28	75	。
CSUSE4-12D0120	12	12	30	75	·
CSUSE4-16D0130	13	16	33	100	。
CSUSE4-16D0140	14	16	35	100	。
CSUSE4-16D0150	15	16	38	100	。
CSUSE4-16D0160	16	16	40	100	·
CSUSE4-20D0170	17	20	40	100	。
CSUSE4-20D0180	18	20	40	100
CSUSE4-20D0190	19	20	40	100	。。
CSUSE4-20D0200	20	20 --	40	100	·

Tolerance

D size range	Dtolerance	dtolerance
Φ1.0-Φ2.9	0/-0.02	h6
Φ3.0-Φ6.4	-0.01/-0.03
Φ6.5-Φ10.9	-0.01/-0.035
Φ11.0-Φ16.5 Φ17.0-Φ20.0	-0.01/-0.04 -0.015/-0.045

special drill bit for carbide steel processing

characteristic of special drill bit for carbide steel processing .C002
special drill bit for carbide steel processing 5XD (outside cooling) ..C003
special drillbit for carbide steel processing 5XD (inner-cooling) ...C007

KSDindexabledrills

FeatureofKSDindexabledrills ..C011
KSDindexabledrills ..C012
InsertofKSDindexabledrills .C020
Recommended cutting conditions ..C022

Double-sidechamfering short-hole drill

Double-side chamfering short-hole drill ..C024

Special drill bit for carbide steel processing

Product Feature

. Functional feature

It issuitable for processing lowcarbonsteel,medium carbonsteel andalloy steel below HRC28 Strong centeringability,stable dimensional accuracyand goodsurface quality.

IManufacturingcharacteristics

Cutting edge tolerance:m7
Flute type: Special design,easy to remove chips
Horizontal cutting edge:horizontal modification, C.H.Tech standard
Handle form:DIN6535HAh6
Coating:He/NaNo

Special drill bit forcarbide steel processing 5XD (external coolant)

Partnumber	D	d	L	L3	L4	LS	Inventory
CWE05-0300-P	3	4 ：	62	： 28	： 23	： 36 ：	·
CWE05-0310-P	3.1	4	62	28	23	： 36 ...	·
CWE05-0320-P	3.2 ：	4	·。 62	28	23	·· 36 ·	·
CWE05-0330-P	3.3	4	62	28	23	36	·
CWE05-0340-P	3.4	4	62	28	23	： 36	·
CWE05-0350-P	3.5	4	62	28	23	36	·
CWE05-0360-P	3.6	4	....· 62	28	.· · 23	： 36	·
CWE05-0370-P	3.7	4	.. 62	·. 28	.·. 23	： 36 .....	·
CWE05-0380-P	3.8	4	.. 62	28	29	36 ..	·
CWE05-0390-P	3.9	.... 4	62	28	·. 29	36 ....	·
CWE05-0400-P	4	4	62	28	29	36	·
CWE05-0410-P	4.1	.... 6	74	36	; 29	36 .....	·
CWE05-0420-P	4.2	6	74	36	29	.· 36	·
CWE05-0430-P	4.3	6	74	36	29	36	·
CWE05-0440-P	4.4 ：	6	74	36	29	36	·
CWE05-0450-P	4.5 ...	6	... 74	: 36	. 29	36 ...	·
CWE05-0460-P	4.6 ....	6	74	36	29	36	·
CWE05-0470-P	4.7	6	74	36	29	36 ....	·
CWE05-0480-P	4.8	6	82	44	· 35	： 36	·
CWE05-0490-P	4.9 ...·	6	82	44	35	36 ,*	·
CWE05-0500-P	5	6	.. . 82	44	35	： 36	·
CWE05-0510-P	5.1 ;	6	82	44	35	36	·
CWE05-0520-P	5.2	6	... 82	44	.· · 35	： 36	·
CWE05-0530-P	5.3	6	. 82	: 44	... 35	： 36 .....	·
CWE05-0540-P	5.4	... 6	... 82	44	.. 35	： 36
CWE05-0550-P	5.5	6	.... 82	.·.. 44	.... 35	.... 36 .....	·
CWE05-0560-P	5.6	6	. 82	44	35	： 36	·
CWE05-0570-P	5.7	6	82	44	35	36	·
CWE05-0580-P	5.8	6	· 82	44	35	· 36	·
CWE05-0590-P	5.9	6	.. 82	44	35	36 ....	·
CWE05-0600-P	6	6	82	44	35	36	·
CWE05-0610-P	6.1	; 8	91	53	43	36 ...	·
CWE05-0620-P	6.2	8	91	53	43	36	·
CWE05-0630-P	6.3	.... 8	.... 91	53	.... 43	36 ....	·
CWE05-0640-P	6.4	8	91	53	43	： 36	·
CWE05-0650-P	6.5	8	： 91	53	: 43	36	·
CWE05-0660-P	6.6	8	91	53	•• • 43	36	·
CWE05-0670-P	6.7	8	： 91	. 53	43	36	·

Note:·have stockoforreservation

Special drillbit forcarbide steel processing 5XD (external coolant)


Partnumber	D	d	L	L3	L4	LS	Inventory
CWE05-0680-P	6.8	8	91	53	43	36	·
CWE05-0690-P	6.9	.... 8 ....	91	53	43	36	·
CWE05-0700-P	7	8	91	.... 53	43	···· 36 ..	·
CWE05-0710-P	7.1	8 .	91	.... 53	..... 43	40	·
CWE05-0720-P	7.2	8	91	53	.·· 43	40	·
CWE05-0730-P	7.3	8	91	53	... 43	... 40	·
CWE05-0740-P	7.4	8 ....	91	.... 53	43	40 ....	·
CWE05-0750-P	7.5	8	91	.... 53	.... 43	.... 40	·
CWE05-0760-P	7.6	8	91	53	· 43	40	·
CWE05-0770-P	7.7	8 .·..	91	. 53	..·. 43	.... 40	·
CWE05-0780-P	7.8	8 ....	91	· 53	.·· · 43	.... 40 ：	·
CWE05-0790-P	7.9	8 ：	91	... 53	： 43	： 40	·
CWE05-0800-P	8	8	91	53	43	· 40 ：	·
CWE05-0810-P	8.1	10	103	.... 61	.... 49	40	·
CWE05-0820-P	8.2	10	103	61	··…· 49	40 ：	·
CWE05-0830-P	8.3	10 ...	103	... 61	.·· 49	..... 40 ....	·
CWE05-0840-P	8.4	10	103	61	49	..· 40 ...	·
CWE05-0850-P	8.5	10	103	61	49	40 ....	·
CWE05-0860-P	8.6	10 ·	103	61	..·. 49	40 ：	·
CWE05-0870-P	8.7	10	103	... 61	... 49	... 40 ....	·
CWE05-0880-P	8.8	10	103	61	··· 49	40	·
CWE05-0890-P	8.9	10	103	61	49	40 ....	·
CWE05-0900-P	9	10	103	61	·· · 49	40 ..	·
CWE05-0910-P	9.1	10 .·.	103	... 61	49	.··. 40 ...	·
CWE05-0920-P	9.2	10 ···	103	61	49	.... 40	·
CWE05-0930-P	9.3	10	103	.. 61	.... 49	.... 40 ....	·
CWE05-0940-P	9.4	10 ....	103	61	.··· 49	40	·
CWE05-0950-P	9.5	10	103	... 61	49	40	·
CWE05-0960-P	9.6	10 .	103	... 61	49	40	·
CWE05-0970-P	9.7	10 ....	103	.... 61	.... 49	.... 40 ....	·
CWE05-0980-P	9.8	10	103	. 61	··· 49	40	·
CWE05-0990-P	9.9	10	103	... 61	.·. 49	... 40 ....	·
CWE05-1000-P	10	10	... 103	61	49	·· 40 ..	·
CWE05-1010-P	10.1	12	118	71	.... 56	.... 45 ....	·
CWE05-1020-P	10.2	12	118	71	： 56	· 45 ：	·
CWE05-1030-P	10.3	12	118	.... 71	56	45	·
CWE05-1040-P	10.4	12	118	... 71	56	45	·
CWE05-1050-P	10.5	： 12	118	71	56	45 ：	·

Note:·have stockoforreservation

Special drill bit forcarbide steel processing 5XD (external coolant)

Partnumber	D	d	L	L3	L4	LS	Inventory
CWE05-1060-P	10.6	12	118	： 71	： 56	： 45 ：	·
CWE05-1070-P	10.7	： 12	118	71	56	.. 45	·
CWE05-1080-P	10.8	12	118	71	56	45	·
CWE05-1090-P	10.9	12	118	71	56	; 45	·
CWE05-1100-P	11	12	118	71	56	45	·
CWE05-1110-P	11.1	12	118	71	56	45	·
CWE05-1120-P	11.2	12	118	71	56	45	·
CWE05-1130-P	11.3	12	118	71	.·. 56	45	·
CWE05-1140-P	11.4	12	118	71	.·. 56	： 45 ··.	·
CWE05-1150-P	11.5	12	118	71	56	45	·
CWE05-1160-P	11.6	12	118	71	56	45 ·..	·
CWE05-1170-P	11.7	12	118	71	.·. 56	45	·
CWE05-1180-P	11.8	12	118	71	56	45	·
CWE05-1190-P	11.9	12	118	71	56	45	·
CWE05-1200-P	12	12	118	71	56	45	·
CWE05-1210-P	12.1	14	124	77	60	45	.
CWE05-1220-P	12.2	14	124	77	60	45	·
CWE05-1230-P	12.3	14	124	77	60	45	·
CWE05-1240-P	12.4	14	124	77	· 60	45	·
CWE05-1250-P	12.5	14	124	77	60	45	·
CWE05-1260-P	12.6	14	124	… 77	60	45	·
CWE05-1280-P	12.8	14	124	77	60	45	·
CWE05-1290-P	12.9	14	124	77	60	45	·
CWE05-1300-P	13	14	124	77	.. 60	45	·
CWE05-1310-P	13.1	14 ..·.	124	77	： 60	： 45 ....	·
CWE05-1320-P	13.2	14 ..	124	77	.. 60	.. 45 .·.	·
CWE05-1330-P	13.3	14	124	77	60	45	·
CWE05-1340-P	13.4	14	124	77	60	45	·
CWE05-1350-P	13.5	14	124	77	60	45	·
CWE05-1360-P	13.6	14	124	77	60	45	·
CWE05-1370-P	13.7	14	124	77	60	45	·
CWE05-1380-P	13.8	14	124	77	60	45	·
CWE05-1390-P	13.9	14	124	77	60	45	·
CWE05-1400-P	14	14	: 124	77	60	: 45 ..	·
CWE05-1410-P	14.1	16	133	83	· 63	45	·
CWE05-1420-P	14.2	16	133	; 83	... 63	45	·
CWE05-1430-P	14.3	16	133	83	63	45	·
CWE05-1440-P	14.4	16 ：	133	： 83	63	45 ;	·

Note:·have stockoforreservation

Special drillbit forcarbide steel processing 5XD (external coolant)

Partnumber	D	d	L	L3	L4	LS	Inventory
CWE05-1450-P	14.5	16	133	83	63 ...·	45 ：	·
CWE05-1460-P	14.6	; 16	.... 133	83	.... 63 ：	45	·
CWE05-1470-P	14.7	16	133	83	63 ：	45	·
CWE05-1480-P	14.8	· 16	.... 133 ...	83	... 63	45 ...	·
CWE05-1490-P	14.9	16	133	83	。。 63 ：	45	·
CWE05-1500-P	15	16	... 133	83	63	45	·
CWE05-1510-P	15.1	： 16	133	, 83	.... 63	45
CWE05-1520-P	15.2	16	.... 133 ...	83	.... 63	: 45	·
CWE05-1530-P	15.3	16	133	83	. 63	。： 45	·
CWE05-1540-P	15.4	： 16	133 ..	83	.... 63	45	·
CWE05-1550-P	15.5	16	133	83	... 63	45
CWE05-1560-P	15.6	16	133	... 83	63	45	·
CWE05-1570-P	15.7	16	133	. 83	63	45
CWE05-1580-P	15.8	... 16	133	.. 83	63	45 ...	·
CWE05-1590-P	15.9	· 16	133	83	： 63	： 45	·
CWE05-1600-P	16	16	... 133	... 83	63	45 ...	·

Note:·have stockoforreservation

Special drill bit for carbide steel processing 5XD (inner-cooling)

Partnumber	D	d	L	L3	L4	LS	Inventory
CWS05-0300-P	3	4 ：	62	： 28	： 23	36 ：	·
CWS05-0310-P	3.1	4	62	28	.. 23	36	·
CWS05-0320-P	3.2	4	·。 62	28	23	36	·
CWS05-0330-P	3.3	4	: 62	28	23	36	·
CWS05-0340-P	3.4	4	62	： 28	. · · 23	36	·
CWS05-0350-P	3.5	4	. 62	28	·. 23	36	·
CWS05-0360-P	3.6	4	.·.. 62	28	23	36	·
CWS05-0370-P	3.7	4	... 62	28	23	36 ...	·
CWS05-0380-P	3.8	4	62	28	29	： 36	·
CWS05-0390-P	3.9	4	62	28	·. 29	36	·
CWS05-0400-P	4	4	62	28	29	36	·
CWS05-0410-P	4.1	6	: 74	36	29	36	·
CWS05-0420-P	4.2	6	74	36	29	36	·
CWS05-0430-P	4.3	6	74	36	29	36
CWS05-0440-P	4.4	6	74	36	29	36
CWS05-0450-P	4.5	6	74	36	29	36 ...
CWS05-0460-P	4.6	6	74	36	29	36	·
CWS05-0470-P	4.7	6	74	36	: 29	.. 36 ..	·
CWS05-0480-P	4.8	6	82	44	· 35	36 ....	·
CWS05-0480-P	4.9	6	... 82	: 44	... 35	36	·
CWS05-0500-P	5	6	82	： 44	·· 35	36	·
CWS05-0510-P	5.1	6	82	; 44	35	36	·
CWS05-0520-P	5.2	6	82	44	35	. . . 36 ·
CWS05-0530-P	5.3	6	. 82	: 44	35	: 36 ....	·
CWS05-0540-P	5.4	6	82	44	.... 35	： 36 ....	·
CWS05-0550-P	5.5	6	.... 82	44	... 35	. 36 ....	·
CWS05-0560-P	5.6	6	82	44	35	36	·
CWS05-0570-P	5.7	6	82	44	35	36 ...	·
CWS05-0580-P	5.8	6	82	44	35	36	·
CWS05-0590-P	5.9	6	82	44	35	36	·
CWS05-0600-P	6	6	82	44	35	36
CWS05-0610-P	6.1	8	· 91	53	43	36	·
CWS05-0620-P	6.2	8	91	53	43	36	·
CWS05-0630-P	6.3	8	.... 91	53	: 43	36	·
CWS05-0640-P	6.4	8	..·. 91	53	43	： 36 ..·.	·
CWS05-0650-P	6.5	8	... 91	.. 53	... 43	36
CWS05-0660-P	6.6	8	91	53	43	36	· ·
CWS05-0670-P	6.7	8	： 91	53	43	36 ;	·

Note:·have stockoforreservation

Special drill bitforcarbide steel processing 5XD (inner-cooling)


Partnumber	D	d	L	L3	L4	LS	Inventory
CWS05-0680-P	6.8	8	91	53	43	36 ：	·
CWS05-0690-P	6.9	8	91	53	43	36 :	·
CWS05-0700-P	7	8	91	53	43	36 ：	·
CWS05-0710-P	7.1	8	91	53	43	40	·
CWS05-0720-P	7.2	8	91	53	43	40	·
CWS05-0730-P	7.3	8	91	53	43	40	·
CWS05-0740-P	7.4	8	91	53	43	40 ：	·
CWS05-0750-P	7.5	8	91	53	43	40 ：	·
CWS05-0760-P	7.6	8	91	53	43	40	·
CWS05-0770-P	7.7	8	91	53	43	40	·
CWS05-0780-P	7.8 ：	8	91	： 53	： 43	40 ：	·
CWS05-0790-P	7.9	8	91	53	43	： 40 ：	·
CWS05-0800-P	8	8	91	53	··. 43	40 ：	·
CWS05-0810-P	8.1	10	103	61	49	40	·
CWS05-0820-P	8.2	10	103	61	49	： 40 ：	·
CWS05-0830-P	8.3	10	103	61	49	40	·
CWS05-0840-P	8.4	10	103	61	49	40 ：	·
CWS05-0850-P	8.5	10	103	61	49	40	·
CWS05-0860-P CWS05-0870-P	8.6	10	103	61 61	49	40	·
	8.7 8.8	10 10	103		49	40	·
CWS05-0880-P			103 103	61	49	40 ：	·
CWS05-0890-P	8.9	10		61	: 49	: 40	·
CWS05-0900-P	9	10	103	61	·· 49	40 ：	·
CWS05-0910-P	9.1	10	103	61	49	40	·
CWS05-0920-P	9.2	10	103	61	··· 49	40 ...	·
CWS05-0930-P	9.3	10	103	61	49	40	·
CWS05-0940-P	9.4	： 10	103	61	： 49	40 ：	·
CWS05-0950-P	9.5	： 10	103	61	： 49	40	·
CWS05-0960-P	9.6	10	103	61	49	·· 40 ：	·
CWS05-0970-P	9.7	10	103	61	49	40	·
CWS05-0980-P	9.8	10	103	61	49	40	·
CWS05-0990-P	9.9	10	103	61	49	40 ：	·
CWS05-1000-P	10	10	103	61	· 49	40 ：	·
CWS05-1010-P	10.1	12	118	71	56	45 ：	·
CWS05-1020-P	10.2	12	118	71	56	45	·
CWS05-1030-P	10.3	12	118	71	56	45 :	·
CWS05-1040-P	10.4	： 12	118	： 71	： 56	.·. 45 ：	·
CWS05-1050-P	10.5	12 ：	118	71	56	45 ：	·

Note:·have stockoforreservation

Special drill bit for carbide steel processing 5XD (inner-cooling)

Partnumber	D	d	L	L3	L4	LS	Inventory
CWS05-1060-P	10.6	12 ：	118	： 71	： 56	： 45 ··	·
CWS05-1070-P	10.7	12	118	71	.. 56	.. 45	·
CWS05-1080-P	10.8	12	118	71	56	45	·
CWS05-1090-P	10.9	12	118	... 71	... 56	45	·
CWS05-1100-P	11	12	118	71	56	45	·
CWS05-1110-P	11.1	12	118	71	.... 56	45	·
CWS05-1120-P	11.2	12	.... 118	71	56	45 ...	·
CWS05-1130-P	11.3	12	118	71	... 56	: 45 ...	·
CWS05-1140-P	11.4	12	118	71	56	45	·
CWS05-1150-P	11.5	12	118	71	56	45	·
CWS05-1160-P	11.6	12	118	71	56	45	·
CWS05-1170-P	11.7	12	118	71	.·. 56	45 .	·
CWS05-1180-P	11.8	12 ·	118	71	56	45	·
CWS05-1190-P	11.9	12 ...	118	71	56	45	·
CWS05-1200-P	12	12	118	71	56	45
CWS05-1210-P	12.1	14	124	77	60	45	·
CWS05-1220-P	12.2	14	124	77	60	45	·
CWS05-1230-P	12.3	14	124	77	.. 60	. 45 ..
CWS05-1240-P	12.4	14	124	77	： 60	45 ：	·
CWS05-1250-P	12.5	14	124	.. 77	.·.. 60	... 45 ....	·
CWS05-1260-P	12.6	14 ...·.	124	.... 77	...·. 60	45 ....	·
CWS05-1280-P	12.8	14	124	; 77	... 60	. 45 ....	·
CWS05-1290-P	12.9	14	124	77	60	... 45	·
CWS05-1300-P	13	14	124	77	... 60	... 45 ....	·
CWS05-1310-P	13.1	14	124	77	.·· 60	： 45 ....	·
CWS05-1320-P	13.2	14 ....	124	77	.... 60	.... 45 ....	·
CWS05-1330-P	13.3	14 .。	124	77	60	45	·
CWS05-1340-P	13.4	14	124	77	... 60	. 45 ...	·
CWS05-1350-P	13.5	14	124	77	60	45
CWS05-1360-P	13.6	14	124	77	.. 60	45 ....	·
CWS05-1370-P	13.7	14	124	77	60	45	·
CWS05-1380-P	13.8	14	124	77	... 60	45	·
CWS05-1390-P	13.9	14	124	77	60	45	·
CWS05-1400-P	14	14	124	77	60	45 ：	·
CWS05-1410-P	14.1	16	133	83	63	。 45	·
CWS05-1420-P	14.2	16	133	·. 83	... 63	·. 45 ...	·
CWS05-1430-P	14.3	16	133	.. 83	.... 63	45	·
CWS05-1440-P	14.4	： 16 ：	133	: 83	.... 63	45 ：	·

Note:·have stockoforreservation

Special drill bit for carbide steel processing 5XD (inner-cooling)

Partnumber	D	d	L	L3	L4	LS	Inventory
CWS05-1450-P	14.5	16	..... 133	83	63 ...·	45 ：	·
CWS05-1460-P	14.6	; 16	.... 133	83 ....	63	45	·
CWS05-1470-P	14.7	16	133	83	.... 63 ：	45	·
CWS05-1480-P	14.8	; 16	.... 133	... 83	.... 63 ：	45	·
CWS05-1490-P	14.9	16	133	83	。 63	：。 45	·
CWS05-1500-P	15	16	133	... 83	.. 63	45	·
CWS05-1510-P	15.1	： 16	133	. 83	.... 63	45
CWS05-1520-P	15.2	, 16	... 133	... 83	..... 63	45	·
CWS05-1530-P	15.3	16	133	83	.... 63	： 45	·
CWS05-1540-P	15.4	： 16	133	83	.. 63	45	·
CWS05-1550-P	15.5	16	133	83	.. 63	45
CWS05-1560-P	15.6	16	133	.. 83	... 63	45 ...	·
CWS05-1570-P	15.7	16	133	83	63	45
CWS05-1580-P	15.8	; 16	133	83	63	45	·
CWS05-1590-P	15.9	· 16	133	83	.... 63	45	·
CWS05-1600-P	16	16	.. 133	.. 83	63	.·. 45 ...	·

Note:·have stockoforreservation

KSD indexable drills

ProductFeature

Force balanced design

The innerand outer cutting edgesare madeofdouble materials,CPA025B is black,CPA225B is yellow, And itiseasier to identify by using of innerand outer cutting edges.
(Inneredge ismadeof CPA025B,outer edge ismadeof CPA225B)
Excellent the chips removal.
Good processing surface.
4cornercutting edge,reduce the tool cost.
Realize the diversity of processing.
LengthofdrillholeL/D:2-5 timesof diameter
Cooling system: inner cooling structure
Range of diameter: \Phi 1 2 . 5 { * } \Phi 5 0 {mm }

Partnumber								Insert	Screw	Wrench
	D	d	d1	Size L	L1	L2		Insert	Screw	Wrench
	KSD20-C20-125-SP05	12.5	20	25	94	26	50	SP**050204	T2040	TIP6
KSD20-C20-130-SP05	13	20	25	94	26	50
KSD20-C20-135-SP05	13.5	20	25	96	28	50
KSD20-C20-140-SP05	14	20	25	96	28	50
KSD20-C20-145-SP05	14.5	20	25	99	30	50
KSD20-C20-150-SP05	15	20 25	25 32	99	30	50	SP**060204	T2250	TIP6
KSD20-C25-160-SP06 KSD20-C25-165-SP06	16 16.5	25	32	108 110	32 34	56
KSD20-C25-170-SP06	17	25	32	110		56
KSD20-C25-175-SP06	17.5	25	32		34	56
	18	25	32	113	36	56
KSD20-C25-180-SP06	18.5	25	... 32	115	38	56
KSD20-C25-185-SP06			32	115	38	56
KSD20-C25-190-SP06	19 19.5	25 25	32	116 119	38	56
KSD20-C25-195-SP06 KSD20-C25-200-SP06	20	25	32	119	40	56
	21	25	32		40	56
KSD20-C25-210-SP06	21.5	25	32	121 123	42	56
KSD20-C25-215-SP06	22	25	32	123	44	56
KSD20-C25-220-SP07 KSD20-C25-225-SP07	22.5	25	32	127	44 46	56 56	SP**07T308		T2560	TIP8
KSD20-C25-230-SP07	23	25	45	127	46	56
KSD20-C25-235-SP07	23.5	25	45	130	48	56
KSD20-C25-240-SP07	24	25	45	130	48	56
KSD20-C25-245-SP07	24.5	25	45	133	50
KSD20-C25-250-SP07	25	25	45	133	50	56 56
KSD20-C25-255-SP07	25.5	25	45	135	52	56
KSD20-C25-260-SP07	26	25	45	135	52	56			TIP15
KSD20-C25-265-SP07	26.5	25	45	137	54		56
KSD20-C32-280-SP09	28	32	45	144	56		60
KSD20-C32-285-SP09	28.5	32	45	146	58	60
KSD20-C32-290-SP09	29	32	45	146	58	60				SP**090408	T3590
KSD20-C32-295-SP09	29.5	32	55	151	60	60
KSD20-C32-300-SP09	30	32	55	151	60	60
KSD20-C32-310-SP09		32	55	154	62	60
	31
KSD20-C32-320-SP09	32	32	55	156	64	60
KSD20-C32-330-SP09	33	32	55		158	66	60

Partnumber	Size						Insert	Screw	Wrench
Partnumber	D	d	d1	L	L1	L2	Insert	Screw	Wrench
KSD20-C40-340-SP11	： 34	40	55	173	68	70	SP**110408	T4090 T5013	TIP15 TIP20
KSD20-C40-350-SP11	35	40	55	175	70	70
KSD20-C40-360-SP11	36	40	55	177	72	70
KSD20-C40-370-SP11	37	40	55	179	74	70
KSD20-C40-380-SP11	38	40	55	183	76	70
KSD20-C40-385-SP11	38.5	40	55	185	78	70
KSD20-C40-390-SP11	39	40	55	185	78	70
KSD20-C40-400-SP11 KSD20-C40-410-SP11	40 41	40 40	60 60	189 191	80 82	70 70
KSD20-C40-420-SP14	42	40	60	193	84	70
KSD20-C40-430-SP14	43	40	60	196	86	70
KSD20-C40-440-SP14	44	40	60	198	88	70
KSD20-C40-450-SP14	45	40	60	202	90	70
KSD20-C40-460-SP14	46	40	60	204	92	70
KSD20-C40-470-SP14	47	40	60	206	94	SP**140512 70
KSD20-C40-480-SP14	48	40	60	209	96	70
KSD20-C40-490-SP14	49		40	60	212	98	70
KSD20-C40-500-SP14	50		40	60	215	100	70


Partnumber	Size					Insert	Screw		Wrench
Partnumber	D	d	d1	L	L1	Insert	Screw		Wrench	L2 50
KSD30-C20-125-SP05	12.5	20	25	107	39			SP**050204	T2040	TIP6
KSD30-C20-130-SP05	13	20	25	107	39	50
KSD30-C20-135-SP05	13.5	20	25	110	42	50
KSD30-C20-140-SP05	14	20	25	110	42	50
KSD30-C20-145-SP05	14.5	20	25	114	45	50
KSD30-C20-150-SP05	15	20 25	25 32	114 124	45 48	50	SP**060204		T2250 TIP6
KSD30-C25-155-SP06 KSD30-C25-160-SP06	15.5 16	25	32	124		56
	16.5	25	32	127	48	56
KSD30-C25-165-SP06 KSD30-C25-175-SP06	17.5	25	32	130	51	56
KSD30-C25-185-SP06	18.5	25	32	134	54	56
KSD30-C25-190-SP06	19	25	32	134	57	56
	19.5	25	32	138	57	56
KSD30-C25-195-SP06	20	25	32	138	60	56
KSD30-C25-200-SP06 KSD30-C25-205-SP06	20.5	25	32	142	60	56
KSD30-C25-210-SP06	21	25	32	142	63	56
KSD30-C25-215-SP06	21.5	25	32	145	63 66	56 56
KSD30-C25-220-SP07	22	25	32	145	66	56		T2560	TIP8
KSD30-C25-225-SP07	22.5	25	45	154	69	60				SP**07T308 T2560
KSD30-C25-230-SP07	23	25	45	150	69	56
KSD30-C25-235-SP07	23.5	25	45	154	72	56
KSD30-C25-240-SP07	24	25	45	154	72	56
KSD30-C25-245-SP07	24.5	25	45	158	75	56			TIP8
KSD30-C32-230-SP07	23	32	45	154	69	60				SP**07T308
KSD30-C32-240-SP07	24	32	45	158	72	60
KSD30-C32-250-SP07	25	32	45	161	75	60
KSD30-C32-255-SP07	25.5	32	45	165	78	60
KSD30-C32-260-SP07	26	32	45	165		78	60
KSD30-C32-265-SP07	26.5	32	45	168	81		60
KSD30-C32-280-SP09	28	32	45	172	84	60
KSD30-C32-285-SP09	28.5	32	45	175	87	60	SP**090408
KSD30-C32-290-SP09	29	32	45	175		87	60	T3590	TIP15
KSD30-C32-295-SP09	29.5	32	55	181	90		60
KSD30-C32-300-SP09	30	32	55	181		90	60
KSD30-C32-305-SP09	30.5	32	55	185	93		60

Partnumber	Size						Insert	Screw	Wrench
Partnumber	D	d	d1	L	L1	L2	Insert	Screw	Wrench
KSD30-C32-310-SP09	31	32	55	185	93	60	SP**090408	T3590	TIP15
KSD30-C32-320-SP09	32	32	55	188	96	60
KSD30-C32-325-SP09	32.5	32	55	192	99	60
KSD30-C32-330-SP09	33	32	55	192	99	60		T4090	TIP15
KSD30-C32-350-SP11	35	32	55	199	105	60		T4090	TIP15
KSD30-C32-360-SP11	36	32	55	203	108	60	SP**110408
KSD30-C40-340-SP11	34	40	55	205	102	70	SP**110408
KSD30-C40-350-SP11	35	40	55	209	105	70	T4090			TIP15
KSD30-C40-360-SP11	36	40	55	213	108	70
KSD30-C40-380-SP11	38	40	55	220	114	70
KSD30-C40-390-SP11	39	40	55	224	117	70
KSD30-C40-400-SP11	40	40	60	228	120	70
KSD30-C40-405-SP11	40.5	40	60	231 232	123	70 70
KSD30-C40-410-SP11 KSD30-C40-420-SP14	41 42	40 40	60 60		235	123 126 70	SP**140512	T5013	TIP20
KSD30-C40-430-SP14	43	40	60	239	129	70
KSD30-C40-440-SP14	44	40	60	242	132	70
KSD30-C40-450-SP14	45	40	60	247	135	70
KSD30-C40-460-SP14	46	40	60	251	138	70
KSD30-C40-470-SP14	47	40	60	254	141	70
KSD30-C40-480-SP14	48	40	60	258	144	70
KSD30-C40-490-SP14	49	40	60		261	147	70

KSD30-C40-500-SP14		50	40	60	265	150	70


Partnumber	D d	Size				L2	Insert	Screw	Wrench
Partnumber		20	d1 25	L 120	L1 52	50	Insert	Screw	Wrench
KSD40-C20-125-SP05	12.5 13	20	25	120			SP**050204	T2040	TIP6
KSD40-C20-130-SP05		20	25		52	50
KSD40-C20-135-SP05	13.5			124	56	50
KSD40-C20-140-SP05	14	20	25	124	56	50
KSD40-C20-145-SP05	14.5	20	25	129	60	50
KSD40-C20-150-SP05	15	20	25	129	60	50
KSD40-C25-155-SP06	15.5	25 25	32 32	140 140	64 64	56	SP**060204		T2250	TIP6
KSD40-C25-160-SP06 KSD40-C25-165-SP06	16 16.5	25	32	144	68	56
KSD40-C25-170-SP06	17	25	32	144		56
	17.5	25	32	149	68	56
KSD40-C25-175-SP06		25	32		72	56
KSD40-C25-180-SP06	18 18.5	25	32	149 153	72	56
KSD40-C25-185-SP06		25	32	153	76	56
KSD40-C25-190-SP06	19 19.5	25	32	159	76 80	56
KSD40-C25-195-SP06 KSD40-C25-200-SP06	20	25	32	159		56
KSD40-C25-205-SP06	20.5	25	32	163	80	56
	21	25	32	163	84	56
KSD40-C25-210-SP06		25	32	167	84	56
KSD40-C25-215-SP06	21.5	25	32	167	88 88	56 56
KSD40-C25-220-SP07	22	25	32	173			SP**07T308	T2560	TIP8
KSD40-C25-225-SP07	22.5 23	25	45	173	92	56
KSD40-C25-230-SP07	23.5	25	45	177	92	56
KSD40-C25-235-SP07 KSD40-C25-240-SP07	24	25	45	177	96	56
KSD40-C25-245-SP07	24.5	25	45	183	96	56
		25	45		100	56
KSD40-C25-250-SP07	25		45	183	100	56 56
KSD40-C25-255-SP07	25.5	25		187	104
KSD40-C25-265-SP07	26.5	25 25	45 45	191 195		108 112	56 56 60	T2560
KSD40-C25-275-SP07 KSD40-C32-260-SP07	27.5 26	32	45	191		104	56 56 60	T2560
KSD40-C32-270-SP07	27	32	45	195		108	SP**07T308 60	T3590	TIP8
KSD40-C32-280-SP09	28	32	45	200	112					60
KSD40-C32-285-SP09	28.5	32	45	204	116	60				SP**090408
KSD40-C32-290-SP09	29		32	45	204	116	60
KSD40-C32-295-SP09							60
	29.5	32	. 55	212		120

Partnumber	Size						Insert	Screw	Wrench
Partnumber	D	d	d1	L	L1	L2	Insert	Screw	Wrench
KSD40-C32-300-SP09	30	32	55	212	120	60	SP**090408	T3590	TIP15
KSD40-C32-305-SP09	30.5	32	55	216	124	60
KSD40-C32-310-SP09	31	32	55	216	124	60
KSD40-C32-315-SP09	31.5	32	55	220	128	60
KSD40-C32-320-SP09	32	32	55	220	128	60
KSD40-C32-325-SP09	32.5	32	55	224	132	60
KSD40-C32-330-SP09	33	32	55	224	132	60	SP**110408	T4090 TIP15
KSD40-C40-340-SP11 KSD40-C40-350-SP11	34	40	55 55	239 244	136 140	70 70
KSD40-C40-360-SP11	35 36	40 40	55	249	144	70
KSD40-C40-370-SP11		40	55	254
KSD40-C40-380-SP11	37		55	259	148	70
KSD40-C40-390-SP11	38	40		263	152	70 70
KSD40-C40-400-SP11	39 40	40 40	55 60	269	156	70
KSD40-C40-410-SP11	41	40	60	273	160 164	70	SP**140512	T5013 TIP20
KSD40-C40-420-SP14	42	40	60	.. 277	168	70
KSD40-C40-430-SP14	43	40	60	281	172	70
KSD40-C40-440-SP14	44	40	60	285	176	70
KSD40-C40-450-SP14	45	40	60	289	180	70
KSD40-C40-460-SP14	46	40	60	293	184	70
KSD40-C40-470-SP14	47	40	60	297	188	70
KSD40-C40-480-SP14	48	40	60	301	192	70
KSD40-C40-490-SP14	49	40	60		305	196	70
KSD40-C40-500-SP14	50	40	60	309	200	70

Partnumber	Size					Insert L2	Screw		Wrench
Partnumber	D	d	d1	L	L1	Insert L2	Screw		Wrench
KSD50-C20-125-SP05	12.5	20	25	133	65	50	SP**050204	T2040	TIP6
KSD50-C20-130-SP05	13	20	25	133	65	50
KSD50-C20-135-SP05	13.5	20	25	138	70	50
KSD50-C20-140-SP05	14	20	25	138	70	50
KSD50-C20-145-SP05	14.5	20	25	144	75	50
KSD50-C20-150-SP05	15	20 ：	25	144	75	50	SP**060204	T2250	TIP6 TIP8
KSD50-C25-155-SP06 KSD50-C25-160-SP06	15.5 16	25 25	32 32	156 156	80	56
	17	25	32	161	80	56
KSD50-C25-170-SP06	17.5	25	32	167	85	56
KSD50-C25-175-SP06 KSD50-C25-180-SP06	18	25	32		90	56
KSD50-C25-185-SP06	18.5	25	32	167 172	90	56
	19	25	32	172	95	56
KSD50-C25-190-SP06	19.5	25	32	179	95	56
KSD50-C25-195-SP06 KSD50-C25-200-SP06	20	25	32	179	100	56
	20.5	25	32	184	100	56
KSD50-C25-205-SP06 KSD50-C25-210-SP06	21	25	32	184	105	56
KSD50-C25-215-SP06	21.5	25 .·.	32	189	105	56 56
KSD50-C25-220-SP07	22	25	32	189	110 110	56 SP**07T308
KSD50-C32-280-SP09	28	32	45	228	140	60	SP**090408	T3590	TIP15
KSD50-C32-290-SP09	29	32	45	233	145	60
KSD50-C32-300-SP09	30	32	45	241	150	60
KSD50-C32-310-SP09	31	32	45	246	155	60
KSD50-C32-330-SP09	33 ··	32	55	258	165	60	SP**110408	T4090	TIP15
KSD50-C40-340-SP11	34	40	55	275	170	70
KSD50-C40-350-SP11	35	40 ,	55	280	175	70
KSD50-C40-360-SP11	36	40	55	285	180	70
KSD50-C40-380-SP11	38	40	55	296	190	70
KSD50-C40-390-SP11	39	40	55	302	195	70
KSD50-C40-400-SP11	40 ···	40	60	308	200	70		T5013 TIP20
KSD50-C40-410-SP11	41	40	60	314	205	70
KSD50-C40-420-SP14	42	40	60	320	210	70
KSD50-C40-440-SP14	44	40	60	331	220	70
KSD50-C40-450-SP14	45	40	60	337	225	70
KSD50-C40-460-SP14	46	40	60	343		230	70	SP**140512
KSD50-C40-480-SP14	48	40	60	354	240	70

KSD50-C40-500-SP14	50	40	60	365	250		70

Partnumber	Size						L2 Insert	Screw		Wrench
Partnumber	D	d		d1	L	L1	L2 Insert	Screw		Wrench
KSD60-C25-230-SP07	23		25	45	219	138	56	SP**07T308	T2560	TIP8
KSD60-C25-240-SP07	24		25	45	226	144	56	SP**07T308	T2560	TIP8
KSD60-C32-260-SP07	26		32	45	243	156	60	SP**07T308	T2560	TIP8
KSD60-C32-270-SP07	27		32	45	249	162	60	SP**07T308	T2560	TIP8
KSD60-C32-280-SP09	28		32	45	256	168	60	SP**090408	T3590	TIP15
KSD60-C32-290-SP09	29		32	45	262	174	60	SP**090408	T3590	TIP15
KSD60-C32-300-SP09		30	32	55	271	180	60

Partnumber	Material			Size
Partnumber	CPA025B	CPA225B	CPA325B	IC	S	Re	d
SPMG050204-UM	·	·	·	： 5.00	： 2.38	0.4	： 2.25
SPMG060204-UM	·	... ·	·	6.00	2.38	0.4	2.61
SPMG07T308-UM	·	·		7.94	3.97	0.8	2.85
SPMG090408-UM	·	.... ·	...	9.80	4.30	... 0.8	4.05
SPMG110408-UM	·	·	·	11.50	4.80	0.8	4.45
SPMG140512-UM	·	： ·	·	.4 14.30	5.20	.... 1.2	5.75

Note:·have stock ofor reservation

Partnumber	Material	Size
Partnumber	CPA325B	IC	S	Re	d
SPGG050204-M	·	5.00	.··· 2.38	. 0.4	2.25
SPGG060204-M	·	6.00	2.38	... 0.4	2.61
SPGG07T308-M	·	7.94	3.97	..... 0.8	2.85
SPGG090408-M	·	9.80	4.30	.... 0.8	4.05
SPGG110408-M	·	11.50	4.80	0.8	4.45
SPGG140512-M	·	, 14.30	.... 5.20	.... 1.2	5.75

Note:·have stock 0 forreservation

自

铝用加工

Partnumber	Material	Size
Partnumber	CWK001B	IC	S	Re	D
SPGT050204-DA	.	5.00	2.38	... 0.4	2.25
SPGT060204-DA	·	6.00	2.38	0.4	2.61
SPGT07T308-DA	·	7.94	3.97	0.8	2.85
SPGT090408-DA	·	9.8	4.3	0.8	4.05
SPGT110408-DA	·	11.5	4.8	0.8	4.45
SPGT140512-DA	·	14.3	.... 5.2	1.2	5.75

Note:·havestock oforreservation

MaterialRecommendationList

Workingmaterial	Insertmaterial
Workingmaterial	CPA025B	CPA225B	CPA325B	CWK001B
Mild steel			. △
Alloysteel	△		△
Grey cast iron		△
Nodularcast iron	△
Stainlesssteel
Aluminum

Note:recommended \Delta optional

Recommended cutting conditions

Workpiece material	Hardness	Insert material	Φ17-Φ19.5 Cutting				Φ20-Φ23.5
			speed (m/min)	Feed(mm/rev)			Cutting speed (m/min)	Feed(mm/rev)
				1/d=2-6	1/d=2,31/d=4,5	1/d=6			1/d=2-61/d=2，31/d=4,5	1/d=6
P	Mild steel (SS400,S10C,etc.)	≤HB200	CPA025B	0.05 (160-200) (0.04-0.06)	0.05 (0.04-0.06)	0.04 (0.04-0.05)	200 (180-235)	0.06 (0.04-0.08)	0.06 (0.04-0.07)	0.04 (0.04-0.05)
	Carbonsteel Alloy steel （S45C,SCM440,etc.）		HB180-280CPA025B	140 (115-180) (0.06-0.14)	0.08 (0.06-0.09)	0.05 (0.04-0.06)	140 (115-180)	0.10 (0.06-0.18)	0.09 (0.06-0.12)	0.07 (0.06-0.08)
	Carbon steel Alloy steel (SNCM439, etc.)		HB280-350CPA025B	100 (75-140) (0.06-0.14)	0.08 (0.06-0.09)	0.05 (0.04-0.06)	100 (75-140)	0.10 (0.06-0.18)	0.09 (0.06-0.12)	0.07 (0.06-0.08)
	Alloy tol steel (SKD,SKT,etc.)		≤HB350CPA025B	135 (100-170)	0.08 (0.06-0.14) (0.06-0.09)	0.05 (0.04-0.06)	135 (100-170)	0.10 (0.06-0.18)	0.09 (0.06-0.12)	0.07 (0.06-0.08)
M	susi4,sus ete	≤HB200	CPA225B	(14-00 (0.000	(0.00	(0.00-0500)	(11400	(0.060-12))	(0.000	(0.000
	Austeniticstainlesssteel (SUS304LN, SUS316LN,etc.)		>HB200CPA225B	(115-180) (0.04-0.08)	0.05 (0.04-0.06)	0.04 (0.04-0.05)	140 (115-180)	0.08 (0.06-0.12)	0.07 (0.06-0.08)	0.06 (0.06-0.07)
	(SUS410, SUS430,etc.)	≤HB200	CPA225B	(1400 (0.0.0800	(0.040-0600	(0.04-0500)	(1465)	(0.06010)	(0.06-000	(0.0-0
	Ferritic,precipitation (sus431.sus,.tc	>HB200	CPA225B	（(115-165)	0.05 (0.04-0.08) (0.04-0.06)	0.04 (0.04-0.05)	140 (115-165)	0.09 (0.06-0.14)	0.07 (0.06-0.09)	0.06 (0.06-0.07)
	Grey cast iron (FC300 and so on)	Tensile strength ≤350Mpa	CPA225B	(130-195) (0.08-0.14)	0.09 (0.08-0.10)	0.05 (0.04-0.06)	160 (130-195)	0.13 (0.10-0.16)	0.10 (0.10-0.12)	0.07 (0.06-0.08)
	Nodular cast iron (FCD450and so on)	Tensile st50MCPA225B		100 (80-135) (0.08-0.14)	0.09 (0.08-0.10)	0.05 (0.04-0.06)	100 (80-135)	0.13 （0.10-0.16)	0.10 (0.10-0.11)	0.07 (0.06-0.08)
	(FCD700 antiton)			(71.125)	(0.0-11) (0.00-00	(0.000	(71025)	(0.011)	(0.0.0)	0.0000
	Titaniumalloy		CWK001B	30-80	0.06-0.12	0.06-0.12	0.06-0.12	30-80 0.12-0.2	0.12-0.2	0.12-0.2
cooper alloy		CWK001B	150-230	0.06-0.14	0.06-0.14	0.06-0.14	150-230	0.12-0.18	0.12-0.18	0.12-0.18
non-metal		CWK001B	150-230	0.06-0.13	0.06-0.13	0.06-0.13	150-230	0.08-0.13	0.08-0.13	0.08-0.13

Recommended cutting conditions

Workpiece material		Hardness	Insert Cutting speed material (m/min)	Φ24-Φ33				Φ34-Φ50
					Feed(mm/rev)			Cutting speed (m/min)	Feed(mm/rev)
				1/d=2-61/d=2，31/d=4,5			1/d=6		1/d=2-61/d=2.31/d=45		1/d=6
P	Mild steel (SS400,S10C,etc.)	≤HB200	CPA025B	200 (180-235)	0.07 (0.04-0.08)	0.06 (0.04-0.07)	0.05 (0.04-0.06)	200 (180-235)	0.08 (0.06-0.10)	0.07 (0.06-0.08)	0.06 (0.06-0.07)
	Carbonsteel Alloysteel (S45C,SCM440,etc.)	HB180-280CPA025B		140 (115-180)	0.12 （0.08-0.18)	0.10 (0.08-0.12)	0.09 （0.08-0.10)	140 （115-180)	0.14 (0.08-0.24)	0.12 (0.08-0.16)	0.11 (0.10-0.12)
	Carbon steel Alloy steel (SNCM439,etc.)	HB280-350CPA025B		100 (75-140)	0.12 (0.08-0.18)	0.10 (0.08-0.12)	0.09 (0.08-0.10)	100 (75-140)	0.14 (0.08-0.24)	0.12 (0.08-0.16)	0.11 (0.10-0.12)
	Alloy tool steel (SKD,SKT,etc.)	≤HB350	CPA025B	135 (100-170)	0.12 （0.08-0.18)	0.10 (0.08-0.12)	0.09 （0.08-0.10)	135 (100-170)	(0.08-0.24) 0.14	0.12 (0.08-0.16)	0.10 (0.08-0.12)
M	Austeniticstainless steel (SUS304,SUS316,etc.） Austeniticstainless steel	≤HB200	CPA225B	140 (115-180)	0.09 (0.06-0.12)	0.08 (0.06-0.09)	0.07 (0.06-0.08)	140 (115-180)	0.11 (0.06-0.16)	0.08 (0.06-0.11)	0.07 (0.06-0.10)
	(SUS304LN, SUS316LN,etc.)	>HB200	CPA225B	140 （115-180)	0.09 (0.06-0.12)	0.08 (0.06-0.09)	0.07 （0.06-0.08)	140 (115-180)	0.11 (0.06-0.16)	0.08 (0.06-0.11)	0.07 (0.06-0.10)
	Ferrtic,precipitation (sus410.sus430,t.	≤HB200	CPA225B	140 (115-180)	0.10 (0.06-0.14)	0.05 (0.04-0.06)	0.07 (0.06-0.08)	140 (115-165)	0.11 (0.06-0.16)	0.09 (0.06-0.11)	0.08 (0.06-0.10)
	Ferritic,precipitation (sus4nin,sus2o2,te	>HB200	CPA225B	140 (115-165)	0.10 (0.06-0.14)	0.05 (0.04-0.06)	0.07 (0.06-0.08)	140 (115-165)	0.11 (0.06-0.16)	0.09 (0.06-0.11)	0.08 (0.06-0.10)
K	Grey cast iron (FC300 and so on)	Tensile stre0MthCPA225B		160 (130-195)	0.14 (0.10-0.18)	0.11 (0.10-0.12)	0.09 (0.08-0.10)	160 (130-195)	0.15 (0.10-0.20)	0.12 (0.11-0.13)	0.11 (0.10-0.12)
	Nodularcast iron (FCD450and soon)	Tensile st50MPaCPA225B		100 (80-135)	0.14 （0.10-0.18)	0.11 (0.10-0.12)	0.09 （0.08-0.10)	160 (130-195)	0.15 （0.10-0.20)	0.12 (0.11-0.13)	0.11 (0.10-0.12)
	(FCD70o andtson)		CPA225B	(7125)	(0.018))	(0.0-1)	(0.080.0000)	(160105	(0.1020)0	(0.13)	(0.0-1)
	Titaniumalloy		CWK001B	30-80	0.12-0.2	0.12-0.2	0.12-0.2	30-80	0.14-0.24	0.14-0.24	0.14-0.24
N cooper alloy			CWK001B 150-230	0.12-0.18	0.12-0.18	0.12-0.18	150-230	0.14-0.24	0.14-0.24	0.14-0.24
non-metal			CWK001B	150-230 0.08-0.13		0.08-0.13	0.08-0.13	150-230	0.08-0.14	0.08-0.14	0.08-0.14

Double-side chamfering short-hole drill

Productfeature

Usingelastic floating insert tocomplete the positiveand negativechamferingof the through-hole,and the chamferuniformly.Drillingand chamfering can be completed atone time,which greatly improves production efficiency.

It isusedforone-timedrilingandchamfering bolt holesof railway trunkrail,switch rail and rut rail.

Good processing quality,simple processand low processing cost.

品

Tool specification

Partnumber	D	d	L1	L2	L	Central insert	Perlpheral insert	Chamfer insert	Cylindrical pin	Inventory
SCP22.5-CED-XP25	22	25	88	56	174	SPGX0703	SCGX060204	CED45-22.5	DS4025 -SR1.5
SCP23.5-CED-XP25	23	25	92	56	178	SPGX0703	SCGX070308 CED45-23.5
SCP24.5-CED-XP25	24	25	96	56	182 SPGX0703	SCGX070308	CED45-24.5
SCP25.5-CED-XP32	25	32	100	60	190 SPGX0703	SCGX070308	CED45-25.5
SCP26.5-CED-XP32	26	32	104	60	194 SPGX0903	SCGX070308	CED45-26.5
SCP27.5-CED-XP32	27	32	108	60 198	SPGX0903	SCGX070308	CED45-27.5
SCP28.5-CED-XP32	28	32	112	60	202	SPGX0903	SCGX09T308	CED45-28.5	.
SCP29.5-CED-XP32	29	32	116	60	206	SPGX0903	SCGX09T308	CED45-29.5	DS4925 -SR1.5	.
SCP30.5-CED-XP32	30	32	120	60	210	SPGX0903	SCGX09T308	CED45-30.5
SCP31.5-CED-XP32	31	32	124	60	214	SPGX0903	SCGX09T308	CED45-31.5
SCP32.5-CED-XP32	32	40	128	70	226	SPGX11T3	SCGX09T308	CED45-32.5
SCP33.5-CED-XP32	33	40	132	70	230	SPGX11T3	SCGX09T308	CED45-33.5
SCP34.5-CED-XP32	34	40	136	70	234	SPGX11T3	SCGX09T308	CED45-34.5

Note:·havestock, 0 forreservation

Central insert	Screw for central insert	Wrench	Perlpheral insert	Pcrewfor perlpheral insert	Wrench
SPGX0703	S2506	T8	SCGX060204	S2506	..... T8
SPGX0903	S3008	...... T8	SCGX070308	S3006	..... T8
SPGX11T3	： S35085	... T10	SCGX09T308	S4009	..... T15

Insertspecification

Partnumber	Material(PVD)	Size
Partnumber	CPP025D	A	B	S	d	r
SCGX060204	......	..... 6.35	..... 6.35 .....	2.8 .....	2.38	..... 0.4
SCGX070308	...... ·	..... 7.94	...... 7.94	3.5 ....	3.18	.... 0.8
SCGX09T308	..... ·	.... 9.53	.... 9.53 .....	4.5 .....	3.97 ...	0.8

Partnumber	Material(PVD)	Size
Partnumber	CPP025D	A	B	S	d
SPGX0703	..... ·	： 7.94	7.94	2.8	.... 3.18
SPGX0903	..... ·	9.53	9.53	.... 3.4	.... 3.18
SPGX11T3	.. ·	11.5	11.5	3.8	.. 3.97

Part number	Material (PVD)	Size
Part number	CPP125D	A	B	S
CED45-22.5	·	12.3	17.5	3.2
CED45-23.5	·	12.3	18	3.2
CED45-24.5	·	12.3	18.5	3.2
CED45-25.5	·	12.3	20	3.2
CED45-26.5	·	12.3	20.5	3.2
CED45-27.5	·	12.3	21	3.2
CED45-28.5	·	12.3	21.5	3.2
CED45-29.5	·	12.3	22	3.2
CED45-30.5	·	12.3	23.5	3.2
CED45-31.5	·	12.3	24	3.2
CED45-32.5	·	12.3	24.5	3.2
CED45-33.5		12.3	25	3.2
CED45-34.5	·	12.3	25.5	3.2

Note:·havestock, 0 forreservation

BORING HEAD SERIES

FWN fine-tuning precision boring head ..D002
FWN largediameterfine-tuningprecisionboring head ..D003
FWN-Pexternal fine-tuning precision boring head .D005
FWN-Lexternal fine-tuning precision boring head ..D006

FWN fine-tuning precision boring head

Theselection of back boring head must meet requirements: C>B+D/2

Feature

Innercooling in the centerof boring head. Withdynamic balancestructure,reliablemachining accuracycanbeachieved.

Standard back boring processing,increase theadded value.
μm level adjustment can be achieved by sub-scale cursors.

Partnumber	Boring		Range	Backboring			Range	Insert holder	Torsion	Insert	Screw	Wrench	Weight
Partnumber	L1	L	Range	B	L2	L3	Range	Insert holder	Torsion	Insert	Screw	Wrench	Weight
H1-FWN20-36	29.5	32.5	20-26	10	10.5	19		FWN1-1	0.6Nm				0.06
	29.5	32.5	25-31	10	10.5	19		FWN1-2					0.06
		29.5	32.5 30-36	10	10.5	19	30-36	FWN1-3					0.06
H2-FWN25-47	32.5	35.5	25-33	12.5	11.5	21	36-40	FWN2-1	0.6Nm TPGH			T2050	0.12
	32.5	35.5	32-40	12.5	11.5	21	36-40	FWN2-2					TIP6 0.12
	32.5	35.5	39-47	12.5	11.5	21 39-47	FWN2-3	080202					0.12
H3-FWN32-60	35	40	32-42	16	10	25		FWN3-1	0.7Nm					0.20
	35	40	41-51	16	10	25	46-51	FWN3-2			0.20
	35	40	50-60	16	10	25	50-60	FWN3-3			0.20 0.39
H4-FWN41-74	43	47	41-54	20	14	29		FWN4-1	0.7Nm		0.39 0.39 0.80
H4-FWN41-74	43	47		50-63 20	14	29	53-63	FWN4-2	0.7Nm
	43	47	61-74	20	14	29	61-74 FWN4-3		TCMT 110204
	53	57	53-70	25.5	19	34	62-70	FWN5-1	0.8Nm(standard
H5-FWN53-95	53	57	65-82	25.5	19	34	65-82 FWN5-2		insert)				0.80 0.80
H5-FWN53-95	53	57	78-95	25.5	19	34	78-95	FWN5-3	insert)			T2560	1.75
H6-FWN68-150	67.2	71	68-100	32.5	22	45.2	80-100	FWN6-1				(TC) T3070	TIP8 1.75
H6-FWN68-150	67.2	71	94-126	32.5	22	45.2	94-126	FWN6-20.8Nm
H6-FWN100-203	67.2	71	118-150	32.5	22	45.2	118-150	FWN6-3		TPGH	(TP)	2.47
	67.2	71	100-153	45.5	22	45.2	112-153	FWN6-1			110304
	67.2	71	126-179	45.5	22	45.2	126-179	FWN6-2 0.8Nm			(optional	2.47
	67.2	71	150-203	45.5	22	45.2	150-203	FWN6-3		insert)		2.47
	67.2	87	100-153	45.5	22	45.2	112-153	FWN6-1		insert)			3.96
H7-FWN100-20367.2		87	126-179	45.5	22	45.2	126-179	FWN6-2	0.8Nm			3.96 3.96
H7-FWN100-20367.2	67.2	87	150-203	45.5	22	45.2	150-203	FWN6-3	0.8Nm

Note:Shouldbenotedthefirstwoletersof theinsertwhenchoosingtheboringheadmodel.Forexample:H7-FWN10o-203(TP)。 Torquewrenchesarerecommended.

Partnumber	Figure	Boring head	Partnumber	Figure	Boring head	Partnumber	Figure	Boring head
FWN1-1			FWN4-1			FWN4-1C FWN4-2C		H4-FWN41-74
FWN1-2	H1-FWN20-36
FWN1-3		FWN4-2 FWN4-3	H4-FWN41-74
		H2-FWN25-47	FWN5-1	3°	H5-FWN53-95	FWN4-3C FWN5-1C
FWN2-1
FWN2-2	3		FWN5-2	Insert TCMT110204		FWN5-2C		H5-FWN53-95
FWN2-3			FWN5-3
FWN3-1	Insert		FWN6-1				FWN5-3C FWN6-1C	TCMT110204 H6-FWN68-150
	TPGH080202	H3-FWN32-60	TPGH110304			H6-FWN68-150	(optional insert)
FWN3-2			FWN6-2	(optional insert)	H6-FWN100-203	FWN6-2C FWN6-3C	H6-FWN100-203
FWN3-3								FWN6-3

FWNlargediameterfine-tuningprecisionboring head

Partnumber	Boringrange	L	Adaptersize	B-Boring range	Workdepth	Insert	Weight
LCS-FWN148215	148-215	109	LCS	38-105	30	TCMT1102 TPGH1103	3.18 3.71
LCS-FWN198265	198-265	109	LCS	88-155	30
LCS-FWN248315	248-315	109	LCS	148-205	30

Insert Holder	Insert	Screw	Workdepth	Weight
FWN5-1-TC ....	TCMT1102	T2560	TIP8	0.04
FWN5-1-TP ....	TPGH1103	.... T3070	..... TIP8	0.04

Note:whenselecting the boring head type,the typeof insert should be indicated. Forexample:LCS-FWN148215-TC (selectTCMT insert)or LCS-FWN148215-TP(selectTPGH insert).

Feature

1.Aluminum proportion: 7 0 - 9 0 %
2. Cold inside the center
3.Dynamic balance seting:G6.3;1000rpm

Item	Partnumber	Weight	Picture
Adapter size	HSK-A-LCS
	BT-LCS
	IT-LCS	1
	BBT-LCS	1
	CAT-LCS	=
Large diameter aluminum beam	LCS40-148	1.46
	LCS40-198	1.99
	LCS40-248	2.47
Fine boring aluminum slider	LCA34-S17	0.29
Finish boring head	A34-FWN5395	0.55	中
Fineboringaluminumcounterweightblock	LCA34-S17-PZK	0.86

FWN large diameter fine-tuning precision boring head

Partnumber	Boringrange	L		Adaptersize B-Boring range	Workdepth	Insert	Weight
LCX-FWN298395	298-395	113	： LCX	188-285	25	TCMT1102 TPGH1103	9.5 11.26
LCX-FWN378475	378-475	118	LCX	268-365	25
LCX-FWN458555	458-555	123	LCX	348-445	25

InsertHolder	Insert	Screw	Workdepth	Weight
FWN5-1-TC	... TCMT1102	..... T2560	TIP8	0.04
FWN5-1-TP ......	TPGH1103	..... T3070 .....	TIP8	0.04

Note:whenselecting the boring head type,the typeof insert should be indicated. Forexample:LCS-FWN148215-TC (selectTCMTinsert)or LCS-FWN148215-TP(selectTPGHinsert).

Feature

1.Aluminum proportion: 7 0 ‰
2. Cold inside the center
3.Dynamic balance seting:G6.3;1000rpm

Item	Partnumber	Weight	Picture
Adaptersize	HSK-A-LCX
	BT-LCX
	IT-LCX
	BBT-LCX
	CAT-LCX	= -
Large diameter aluminum beam	LCX40-148	5.33
	LCX40-198	7.09
	LCX40-248	9.02
Fine boring aluminum slider	LCA34-S17	1.02
Finish boring head	A34-FWN5395	0.55
Fine boringaluminumcounterweight block	LCA34-S17-PZK	1.56

FWN-P external fine-tuning precision boring head

Partnumber		Bringe?	Side-lock	Boring	Blane	Insert	Boring	Insert		Torsion Weight
H6-FWN24-34-P	24-34	H6-2452-42 range114		FWN32-60	H3-FWN	FWN3-3	134-144		0.8Nm	1.60
H6-FWN33-43-P	Interference P12203-D					FWN3-2	125-135TPGH0802
H6-FWN42-52-P						FWN3-1	116-126
H6-FWN52-62-P	42-52	H6-5280-42 Interference	P12203-D						0.8Nm	1.80
	52-62	H3-FWN				FWN3-3 FWN3-2	162-172
H6-FWN61-71-P	61-71	FWN32-60					153-163TPGH0802
H6-FWN70-80-P	70-80	range142				FWN3-1	144-154 190-200		0.8Nm
H6-FWN80-90-P	80-90 H6-80108-42					FWN3-3
H6-FWN89-99-P	89-99	P12203-D FWN32-60				FWN3-2					181-191TPGH0802
		Interference range170			H3-FWN	FWN3-1	172-182			2.00
H6-FWN98-108-P	98-108				H3-FWN					2.00

Note:1.EachFWNboring headhaveoneinsertholder,but without insert,itneedorderseparately. 2.When it machining,the spindle should bereversed. 3.FWNboring head can be installed inreverse forboring processing,and the processing range is16 * \Phi 2 0 0 4.Torquewrenchesarerecommended.

FWN-L external fine-tuning precision boring head

Partnumber	Φd	Flanger ①	Extention ②	L	Balance ③	Boring ④	Finish ⑤	Baring	Borin	Torsion Weight
H6-FWN13-115-L	13-115		H6-SL200	180				108-192	75,Φ	0.8Nm	8.7
H6-FWN112-215-L	112-215		H6-SL300	280	Boring head FWN41-74			108-292	75,Φ	0.8Nm	10.02
H6-FWN212-315-L	212-315		H6-SL400	380	Insertholder			108-392	75.Φ	0.8Nm	11.92
H6-FWN312-415-L	312-415H6-FL200		H6-SL500	480H4-CB200	FWN4-1 H4-FWN			108-492	75,Φ	0.8Nm	13.82
H6-FWN412-515-L	412-515		H6-SL600	580	Insert			108-592	75,Φ	0.8Nm	15.72
H6-FWN512-615-L	512-615		H6-SL700	680	TCMT1102				108-692	75,中	17.7
H6-FWN612-715-L	612-715		H6-SL800	780		TPGH110304		108-792	75,Φ	0.8Nm	19.6

Slider fastening screw:ZD801 Note:1.Each FWNboring head have one insertholder,but without insert,itneedorderseparately. 2.When it machining,the spindle should be reversed. 3.Torque wrenches are recommended.

Modularreamer

Replaceableheadreamerseries .E002
Modularrigidconnectionreamersystem ..E004
Modularflexibleconnectionreamersystem ..E008
Operationguide .E012
Processing case .E013
The solution .E014
Survey informationsheet ..E015

Replaceableheadreamerseries

Reamer head

Productfeature

Tools parts:

Highprecision repeatable positioningstructure,simpleoperation, convenient replacement, ensure the consistency of tool replacement accuracy.

Replace the traditional integral structurereamer,andreduce thecost.

Insteadof traditionalweldingreamer,solve thecoatingproblem,improve the toollife,reduce thecost;Solve theunadjustable problemof tool runout, andfigureout the tool accuracy is guaranteed bythe setwell-matchedof the machineandthetools.

Connection parts:

Highprecisionrepeatable positioningstructure

Range of application

Instead of traditional carbidewelding reamer,improve theaccuracy of the toolreplacement, reduce thecost,improve tool life.

Replace boring toolprocess,improve theproducing eficiency,andadapt tothe industrial scaleproduction.

Range of cutting head(mm)	Size				Partnumber	Inventory
Range of cutting head(mm)	L1	L2	D1	D2	Partnumber	Inventory
Φ15≤Φ≤Φ16	40	100	14	16	CRHR090-SD16-L100
	70	120	14	16	CRHR090-SD16-L120
	100	150	14	16	CRHR090-SD16-L150
Φ16	54	100	15	20	CRHR104-SD20-L100
	80	130	15	20	CRHR104-SD20-L130
	120	170	15	20	CRHR104-SD20-L170
Φ19	54	120	18	20	CRHR120-SD20-L120
	95	150	18	20	CRHR120-SD20-L150
	150	200	18	20	CRHR120-SD20-L200
Φ23	30	120	22	20	CRHR150-SD20-L120
	30	150	22	20	CRHR150-SD20-L150
	30	200	22	20	CRHR150-SD20-L200
Φ28	30	120	27	25	CRHR170-SD25-L120
	30	150	27	25	CRHR170-SD25-L150
	30	200	27	25	CRHR170-SD25-L200
Φ33
Φ38.5			Non-standard customized product
Φ44.5

Note: * Indicatesstock,oindicatesavailableforreservation

Insertspecification

Recommended cutting conditions

4048 Face milling seriest

Milling cutterspecification

Insertspecification

Recommendedcuttingconditions

Product feature

Milling cutter specification

Insertspecification

Recommendedcuttingconditions

AN90 Shoulder facing milling product

Productfeature

Milling shank specification

Milling cutter specification

LNF

Facingmillingseriesproducts

Productfeature

Milling cutter specification

Insertspecification

Recommended cutting conditions

Carbideendmill

Endmill for Titanium Alloy

Productfeature

Corner radius end mill for Titanium Alloy

Productfeature

End mill for stainless steel (3 flutes)

Tolerance

End mill for stainless steel (4 flutes)

Tolerance

special drill bit for carbide steel processing

KSDindexabledrills

Double-sidechamfering short-hole drill

Special drill bit for carbide steel processing

. Functional feature

IManufacturingcharacteristics

KSD indexable drills

ProductFeature

铝用加工

MaterialRecommendationList

Recommended cutting conditions

Recommended cutting conditions

Double-side chamfering short-hole drill

Productfeature

Tool specification

Insertspecification

BORING HEAD SERIES

FWN fine-tuning precision boring head

Feature

FWNlargediameterfine-tuningprecisionboring head

Feature

FWN large diameter fine-tuning precision boring head

Feature

FWN-P external fine-tuning precision boring head

FWN-L external fine-tuning precision boring head

Modularreamer

Replaceableheadreamerseries

Productfeature

Range of application

快速跳转到指定页