PREMIUM FLEECE UF205 Aran Fleece 18 2 EN 14058 CLASS 1 ∙ Middle weight polar fleece with anti-pill finish ∙ Pockets: 2 front ∙ Elasticated cuffs ∙ Drawcord adjustable hem ∙ Generous fit for wearer comfort 100% Polyester, Anti-Pill finish 4XL Fleece, 8oz Navy S-4XL, Black M-3XL UF400 Argyll Heavy Fleece 18 2 EN 14058 CLASS 2 ∙ Heavy weight polar fleece with anti-pill finish ∙ Pockets: 2 front ∙ Elasticated cuffs ∙ Drawcord adjustable hem ∙ Generous fit for wearer comfort 100% Polyester, Anti-Pill finish Fleece, 12oz Navy S-6XL, Black S-4XL 6XL UF401 99 City Fleece 18 4 ∙ Double sided, two tone, heavy weight polar fleece ∙ Pockets: 3 front, 1 cell phone ∙ Elasticated cuffs ∙ Contrast silver zippers ∙ Generous fit for wearer comfort 100% Polyester Double Sided Bonded Fleece, Anti-Pill Finish, 12oz Navy M-XXL, Black M-L Heavyweight Double-Sided Fleece

Fabric Information Protection in EXTREMELY COLD Constructed from 100% Breathable Polyester, Oxford -40ºFEnvironments weave, with a Stain Resistant finish, 4.5oz. The fabric is lined with 100% Polyester with a thermal interlining, 9oz for extra warmth and comfort. CS10 ColdStore Jacket 6 CS11 ColdStore Pants 6 2 EN 342 0.534M2. K/W (B), X, 1, X EU 6 EN 342 0.534M2. K/W (B), X, 1, X 6XL ∙ Abrasion resistant Oxford polyester 6XL ∙ Abrasion resistant Oxford polyester ∙ Quilt lined for thermal insulation ∙ Quilt lined for thermal insulation ∙ Reflective tape for visibility ∙ Reflective tape for visibility ∙ Stormflap with hook and loop and zipper fastening ∙ Stormflap with hook and loop and zip fastening ∙ Packaway hood ∙ Pockets: 2 side, 2 knee pad 2 inner ∙ Pockets: 3 front, 1 ID pocket, 2 inner ∙ Elasticated back waist ∙ Drawcord adjustable waist ∙ Zipped ankles 100% Breathable Polyester, Oxford 100% Breathable Polyester, Oxford Weave, Stain-Resistant Finish, 4.5oz Weave, Stain-Resistant Finish, 4.5oz 100% Polyester, 2oz 100% Polyester, 2oz 100% Polyester, 9oz 100% Polyester, 9oz Navy S-6XL Navy S-6XL 100 ColdStore Comfort at -40°F

B013 Insulated Knit Cap Insulatex Lined B029 Beanie LED Head Light USB Rechargeable ∙ Acrylic knitted work beanie hat 9144 ∙ Warm and comfortable acrylic beanie 144 ∙ Insulated with Insulatex lining ∙ Rechargeable LED can be charged in a 12 12 USB Port 9 100% Acrylic, Knit, I N S U L AT E X TM Insulatex Lining, 1oz ermal Insulation 100% Acrylic, Knit Navy, Black One Size Black, Yellow, One Size Orange, Yellow One Size Insulatex is a trademark of Portwest. I N S U L AT E X TM B023 I N S U L AT E X TM ermal Insulation ermal Insulation CS20 Fleece Balaclava 240 HA10 Fleece Hat 96 Reflective Trim Knit Hat 144 9 20 12 Insulatex Lined 12 Insulatex Lined ∙ Light and thin design ∙ Soft and stretchable polar fleece fabric ∙ Acrylic knitted beanie hat ∙ Can be worn under hard hat ∙ Inner soft Insulatex lining offers warmth ∙ Insulated with Insulatex lining ∙ Soft and stretchable fabric for optimum fit and ∙ Windproof and extremely comfortable for and comfort comfort ∙ Can be worn under a helmet wearer ∙ Reflective trim for visibility 100% Polyester, Anti-Pill finish Fleece, 100% Polyester, Anti-Pill finish 100% Acrylic, Knit 5.5oz Fleece, 8oz Insulatex Lining, 1oz Navy, Black One Size Insulatex Lining, 1oz Black, Navy One Size Yellow, One Size Orange, Yellow One Size I N S U L AT E X TM ermal Insulation GL13 144 9 GL16 336 10 CS21 240 12 12 20 Knit Glove Insulatex Lined Touchscreen Knit Glove Neck Tube ∙ Outer acrylic knit fabric ∙ This style glove gives great dexterity for the ∙ Soft, durable and breathable fabric ∙ Inner soft Insulatex lining offers warmth and wearer ∙ Adjustable drawcord and toggle comfort ∙ Outer acrylic knit with metallic component allowing precise movement on touchscreen 100% Acrylic, Knit devices 100% Polyester, Anti-Pill finish Insulatex Lining,1oz Black, One Size 100% Acrylic, Knit Fleece, 8oz Black S/M, L/XL and XXL/3XL Navy One Size 101

USA Workwear Range The Workwear Collection offers a range of designs and fittings suitable for many end uses. Only the best quality fabrics and construction techniques are used guaranteeing comfort and safety. Tested to withstand the rigors of everyday wear, each garment has been carefully designed and manufactured to ensure optimum quality at the best price. 102 Over 110 Years of Workwear Innovation

3 USA Industry Leading Workwear Fabrics Kingsmill™ is 65% polyester 35% cotton and is available in four weights: 4.5oz, 6oz, 7oz and 7.5oz . This fabric guarantees high performance and maximum comfort. The yarns are ring spun with long staple combed cotton providing a smooth handle and excellent pilling resistance. The material is fully pre-shrunk and has superior dye retention. A UPF rating of 50+ will block over 98% of UV rays. Kingsmill Plus is available in 4.5oz and 7.5oz. It has the added benefit of a durable press finish and is industrially launderable. Fortis™ fabric is 65% polyester 35% cotton and is available in 6oz weight. This blend offers durability, protection and excellent wearer comfort. The UPF rating of 50+ blocks over 98% of UV rays. Fortis has been constructed to a high specification and is the practical choice for all your workwear needs. Portwest 100% cotton fabric is available in two weights: 5.5oz and 9oz. This fabric is fully pre-shrunk and has excellent dye retention properties. The long staple fibers used in the construction process provide strength, pilling resistance and a quality finish. This fabric has a UPF rating of 50+ so it will block over 98% of the UV rays which fall on the garment. NOTE: KINGSMILL and FORTIS are trademarks of Portwest. 103 The Best Quality Workwear in the USA

INDUSTRIAL SHIRT HARD WEARING EASY CARE FABRIC S124 F124 Industrial Work Shirt Iona Xtra Shirt (Short Sleeve) ∙ Bartack pencil stall on left pocket 4.5oz ∙ 2” yellow/silver/yellow reflective tape 4.5oz ∙ Industrial wash, durable press with Texpel finish ∙ Bartack pencil stall on left pocket 24 2 ∙ Industrial wash, durable press with Texpel finish Kingsmill Plus, 4.5oz Navy S-5XL Reg 5XL Kingsmill Plus, 4.5oz 24 2 Gray M-5XL Reg Navy, M-5XL 5XL S125 F125 Industrial Work Shirt Iona Xtra Shirt (Long Sleeve) ∙ Bartack pencil stall on left pocket 4.5oz ∙ 2” yellow/silver/yellow reflective tape 4.5oz ∙ Adjustable button closure cuffs ∙ Bartack pencil stall on left pocket ∙ Industrial wash, durable press with Texpel finish 24 2 ∙ Adjustable button closure cuffs 24 2 ∙ Industrial wash, durable press with Texpel finish Kingsmill Plus, 4.5oz 5XL 5XL Navy S-5XL Reg Kingsmill Plus, 4.5oz Gray M-5XL Reg Navy, M-5XL 104

USA Workwear Built to Perform 2886 C701 S790 11”Cargo Shorts Industrial Work Pants Cargo Pants 36 6 36 4 7.5oz 36 6 7oz 6oz ∙ Double stitched robust seams ∙ Soft handle twill ∙ Bartacked at all stress points ∙ Bartacked at all stress points ∙ Pockets: 2 Side, 2 rear (left with button closure) ∙ Pockets: 2 front, 2 leg, 2 rear with ∙ Pockets: 2 side, 2 leg, 2 rear ∙ Interlined waistband and pocketing ∙ Handy waistband D-ring ∙ Industrial wash, durable press with Texpel hook and loop fastening tabs ∙ Side leg cargo pockets for extra Kingsmill, 6oz finish Dark Navy XS-3XL ∙ Available in Regular and Tall fit storage ∙ Available in Regular and Tall fit 52” Kingsmill Plus, 7.5oz Navy 28”-52” Reg, 32”-46” Tall Kingsmill, 7oz Gray 30”-52” Reg, 32”-42” Tall Dark Navy 30”-52” Reg, 30”-48” Tall Black 30”-48” Reg, 30”- 48” Tall Premium Workwear, Exceptional Value 105

MULTI POCKET PANTS Durable Workwear for Demanding Conditions 7oz 7oz C720 Easy access holster pocket storage for work essentials C720 S891 Tradesman Holster Pants Bradford Pants 30 9 24 7 ∙ Bartacked at all stress points ∙ Bartacked at all stress points ∙ Pockets: 2 front, 2 holster, 1 leg, 2 rear with 1 hammer ∙ Pockets: 2 front, 1 leg with cell phone, 1 rear with button loop, 2 knee closure, 2 knee ∙ Side leg cargo pocket for extra storage ∙ 1 side leg pocket with various compartments for extra ∙ Reflective piping for increased visibility ∙ Available in Regular and Tall fit storage ∙ Available in Regular and Tall fit Kingsmill, 7oz Black 28”-46” Reg, 32”-40” Tall Kingsmill, 7oz Navy 72”-116” Reg, 76”-116” Tall 106 Quality Fabric, Modern Design

7oz 7oz p57 6 COLOR OPTIONS F813 C813 Iona Polycotton Coverall Liverpool Zipper Coverall 18 10 24 8 ∙ Front snap closure with 2 way zipper ∙ Front snap closure with 2 way zipper ∙ Pockets: 2 zipped chest, 2 side pass through, 1 ruler, 1 ∙ Pockets: 2 zipped chest, 2 side pass through, 1 cell phone, 1 ruler, 1 sleeve pen, 2 rear with one zipper closure and 2 knee sleeve pen and 1 rear ∙ Action back for comfort ∙ Snap adjustable cuffs ∙ Action back for comfort ∙ 2 Mic tabs ∙ 2” silver reflective tape ∙ Mic tab Kingsmill, 7oz ∙ Available in Regular or Tall fit Navy S-4XL Reg Kingsmill, 7oz 6XL Navy S-6XL Reg, M-3XL Tall, Royal S-XXL Reg Red, Black, Graphite Gray S-3XL Reg Orange S-XXL Reg COLOR COLOR COLOR Hard Wearing Kingsmill Fabric 107

POLYESTER/COTTON COVERALL 6oz TOP QUALITY, Easy Care Fabric S999 Euro Work Polycotton Coverall 24 6 ∙ Front snap closure ∙ Pockets: 2 chest, 1 rear, 1 ruler ∙ 2 side pass though pockets ∙ Elasticated back waist ∙ Available in Regular or Tall fit Fortis, 6oz Navy XS-6XL Reg, S-3XL Tall, Royal S-3XL Reg, Red S-XXL, Bottle Green S-XXL Reg COLOR COLOR 6XL USA BEST SELLER MASSIVE USA STOCK 108 Best Selling Coverall in the USA

COTTON COVERALL 5.5oz p57 100% C814 Iona Cotton Coverall COTTON - Looks Great, 24 8 Feels Better ∙ Lightweight 100% cotton for ultimate comfort ∙ Front snap closure with 2 way zipper ∙ 2” silver reflective tape ∙ Pockets: 2 zipped chest, 2 side pass through, 1 cell phone, 1 ruler, 1 sleeve pen and 1 rear ∙ Action back for comfort ∙ Mic tabs 100% Cotton, 5.5oz Navy, Orange S-6XL Reg, Khaki, Gray, Red, Royal S-3XL Reg Navy Reg Orange S - 6XL Khaki S - 6XL Gray S - 3XL Red S - 3XL Royal S - 3XL S - 3XL 6XL 100% Cotton For Comfort and Durability 109

Painter’s Range Ideal for All Painting and Plastering Jobs This modern range will meet all your painting and plastering needs. The durable cotton fabric is absorbent and has been pre-shrunk to ensure that these garments maintain their shape wash after wash. Garments are designed with a comfort fit and include several handy pockets for secure storage. Front View Side View 9 Full Range of Kneepads P192-193 S810 Bolton Painters Bib S817 Painters Pants 24 8 24 8 ∙ Pockets: 1 zipped chest, 2 side pass through, 1 front, ∙ Pockets: 2 side, 2 knee, 1 rear, 1 leg, 1 ruler 1 multi storage, 2 knee, 1 rear ∙ Half elasticated waist ∙ Designed with a comfort fit ∙ Elasticated shoulder straps ∙ Available in Regular or Tall fit ∙ Designed with a comfort fit 100% Cotton, 3111, Pre-Shrunk, 9oz 100% Cotton, 3111, Pre-Shrunk, 9oz 4XL White S-3XL Reg, S-3XL Tall White XS-4XL 110 Absorbent Fabric for Maximum Protection Against Spills

4x1 p57 Shower Resistant FABRIC UPJ10 7 Pilot Jacket 12 6 ∙ Jacket can be worn four ways ∙ Pockets: 2 side, 1 sleeve, 1 cell phone, 2 zipped chest ∙ Zip out textured pile collar ∙ Zip out sleeves ∙ Knitted cuffs and hem trim 60% Cotton, 40% Polyester, Shower-Proof Finish, 7oz 100% Polyester, 1.5oz 100% Polyester, 13oz Navy S-5XL, Black S-3XL 5XL Engineered FOR ENDURANCE 8 MWMWMWMWMWMW PORTWESTTM UKS32 WWWWWWWW W W WW K IT S OL UTIONS WMWMWMWMWWMWMWMWMWMWMWMWMWMWMWMW Pewter Jacket WMWMWMWMWWMWMWMWMWMWMWMWMWMWMWMWMWMWMWMWMWMWMWMMWMWMW XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 12 4 MWMWMWMWMWMWMWMWMWMMWMWMWMW WMWMWMMWMWMWMWMWMWMWM MWMWMWMMWMW ∙ Textured Polyester and Cotton Fleece 8.5oz PORTWESTTM ∙ Pile inner face 9oz K IT S OL UTIONS ∙ Front full zipper ∙ Lightly insulated sleeves WMWMMWMWMWM ∙ Pockets: 2 front pouch, 1 sleeve, 1 internal ∙ Print access for garment customization WWWWWWW WW W WW WMWMWMWMWWMWMWMWMWMWMWMWMWMWMWMW 65% Polyester, 35% Cotton, 8oz Sleeve Lining: 100% Polyester 2oz Main Body: 100% Polyester Sherpa Pile, 9oz Sleeve Filling: 100% Polyester Wadding, 1oz Black M-XXL Clothing that Works as Hard as You 111

USA Footwear Range The extensive range of Portwest footwear offers a wide choice of industry leading styles, engineered for performance and designed for maximum comfort, protection and reliability. Strong and flexible construction with innovative and stylish design, provide longer lasting, superb fitting footwear that will withstand the test of time. MANUFACTURER DECLARES PRODUCT TESTED TO 112

MANUFACTURER DECLARES 28 Footwear StylesPRODUCTTESTEDTO Portwest PRO Introduc㏌g the new range of premium safety footwear from Portwest featur㏌g the finest materials and components for the ultimate ㏌ safety, performance, comfort and stability. Footwear designed for workers ㏌ the oil and gas ㏌dustries, co㎱truction and utilities. Portwest WORK Complete range of styles made of polymeric materials. Durable and R waterproof co㎱truction t㏊t is highly resistant to fuels, oils, grease and fats. SteelitePORTWEST ® A premium range of safety footwear manufactured us㏌g the finest materials and components. Steelite® footwear conta㏌s protective steel toeca㎰ and/or steel midsoles. The steel components provide outstand㏌g protection from high impacts and compression. CoPOmRTWpESTositeliteTM A premium range of safety footwear which is lightweight and flexible. Portwest Compositelite™ footwear conta㏌s non-metallic protective toeca㎰ and/or non- metallic protective midsoles. STEELITE IS A REGISTERED TRADEMARK OF PORTWEST. PORTWEST COMPOSITELITE IS A TRADEMARK OF PORTWEST. USA Symbols Protective steel toecap - Waterproof Dual density sole unit 100% non-metallic impact (I), compression (C) Water resistant upper Energy absorbing heel Wide fitting Cold insulation Protective non-metallic toecap Slip resistant outsole (SRC) - impact (I), compression (C) Oil resistant outsole Metatarsal protection (Mt) ESD Puncture resistant steel SRC 300°C Full grain leather midsole (PR) HRO Heat resistant outsole Electric hazard protection (EH) Puncture resistant non- SD Static dissipative footwear (SD) EH metallic midsole (PR) Waterproof membrane Anti-static Footwear Size Chart UK Mens Size 1 2 3 4 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 12 13 14 15 16 17 US Mens Size 2 3 4 5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 13 14 15 16 17 18 UK Ladies Size 12345 6 6.5 7 8 9 US Ladies Style 34567 8 8.5 9 10 11 Euro Size 34 35 36 37 38 38.5 39 40 41 41.5 42 42.5 43 43.5 44 45 46 47 48 49 50 51 52 It is recommended to have your foot measured when purchasing footwear as there is no exact standard for converting shoe sizes.

Innovation, quality components, styling and expert construction define the Portwest footwear collections. The toecap protects the wearer’s toes against the risk of injury from falling objects and crushing when worn in work environments where potential hazards may occur. The midsole protects against the foot being pierced by underfoot objects. Safety footwear can be recognized by the following standards: ASTM F2413-11 MANUFACTURER DECLARES PRODUCT TESTED TO Standard specification for performance requirements for protective (safety) toecap footwear. The specification contains performance requirements for footwear to protect workers feet from the following hazards by providing; I Impact resistance (I) for the toe area of footwear. C Compression resistance (C) for the toe area of the footwear. Mt Metatarsal impact protection (Mt) that reduces the chance of injury to the metatarsal bones at the top of the foot. Cd Conductive properties (Cd) which reduce hazards that may result from static electricity build up; and reduce the possibility of ignition of explosives and volatile chemicals. EH Electric hazard protection (EH), to protect the wearer when accidental contact is made by stepping on live electric wires. SD Static dissipative properties (SD) to reduce hazards due to excessively low footwear electrical resistance that may exist where SD footwear is required. PR Puncture resistance (PR) for footwear devices. 114 Superior Comfort and Safety

EN ISO 20345:2011 Category Additional requirements This international standard SB The presence of a safety toecap providing protection against impact injury to the toes caused by specifies basic and additional falling objects. Level of protection provided is 200 joules. Prevention of compression injury to the toes (optional) requirements for SBP if trapped under a heavy object. Level of this protection is 15kN. safety footwear used for S1 As SB standard plus penetration resistance. general purposes. It includes, S1P for example, mechanical S2 As SB standard plus closed seat region, antistatic properties, resistance to fuel oil and energy risks, slip resistance, thermal S3 absorption of seat region. risks, ergonomic behavior. S4 As S1 standard plus penetration resistance. S5 The classification system used to As S1 standard plus water penetration and water absorption resistance. identify the protection provided by the footwear is listed: As S2 standard plus cleated outsole and penetration resistance. 200 joule toecap protection. All rubber or all polymeric footwear with antistatic properties. Resistance to fuel oil, energy absorption of seat region and closed seat region. As S4 standard plus cleated outsole and penetration resistance. Table of additional Requirement Symbols requirements for special applications Penetration resistance P with appropriate A symbols for marking. Electrical properties: Antistatic footwear CI E Resistance to inimical environments: Cold insulation of sole complex WR Whole Footwear Energy absorption of seat region M WRU Water resistant HRO FO Metatarsal protection Upper Water penetration and absorption Outsole Resistance to hot contact Resistance to fuel oil EN ISO 13287:2012 This European Standard specifies a method of test for the slip resistance of conventionally soled safety, protective and occupational footwear. It is not applicable to special purpose footwear containing spikes, metal snaps or similar. The item of footwear to be tested is put on a surface, subjected to a given normal force and moved horizontally relative to the surface. The frictional force is measured and the dynamic coefficient of friction is calculated. If the outsole passes both the ceramic tile test (SRA) and the steel floor test (SRB) it is marked as SRC. Normal Force Normal Force EN ISO 13287:2012 Forward Forward Marking Test Surface Coefficient of Friction (EN 13287) movement of shoe movement of shoe Code Forward Heel Slip Forward Flat Slip relative to surface relative to surface SRA Ceramic tile with SLS* ≥ 0.28 ≥ 0.32 SRB Steel floor with Glycerol ≥ 0.13 ≥ 0.18 SRC Ceramic tile with SLS* \& ≥ 0.28 ≥ 0.32 Steel floor with Glycerol ≥ 0.13 ≥ 0.18 Forward Heel Slip Forward Flat Slip * Water with 5% Sodium Lauryl Sulphate (SLS) solution Protecting your Feet in all Conditions 115

CoPOmRTWpESTositeliteTM UFC69 Montana Hiker Boot EH USA SAFETY FOOTWEAR THAT 10 EH 300°C ASTM HRO ALWAYS PERFORMS ASTM F2413-11 EH MANUFACTURER DECLARES ∙ Protective composite toecap ∙ Puncture resistant composite midsole PRODUCT TESTED TO ∙ Wide fitting ∙ Full grain Nubuck leather ∙ Comfort PU footbed ∙ Quarter mesh lined ∙ Slip, fuel \& oil resistant rubber outsole ∙ Heat resistant outsole Brown, US 6-14 Full-Grain Nubuck Leather PU/Rubber Outsole F47 Ele ctric Hazard Protection EH Wide Fitting EE 116 Superb Comfort for Long Durations of Wear

CompositeliteAVAILABLE IN MANUFACTURER DECLARES PORTWEST TM PRODUCT TESTED TO HALF SIZES UFC13 Indiana Rigger Boot EH 6 EH 300°C HRO ASTM ASTM F2413-11 EH ∙ Protective composite toecap ∙ Puncture resistant composite Midsole ∙ Wide fitting ∙ Buffalo grain float oil leather ∙ Comfort PU footbed ∙ Quarter mesh lined ∙ Slip, fuel \& oil resistant rubber outsole ∙ Heat resistant outsole ∙ 100% Metal free Brown, US 6-13 Buffalo Grain Float Oil Leather PU/Rubber Outsole F47 Ele ctric HazardProtection EH Wide Fitting EE Essential Safety Footwear at Affordable Prices 117

SteelitePORTWEST THE BEST MANUFACTURER DECLARES COMPONENTS PRODUCT TESTED TO AND MATERIALS USED UFT69 Steelite Ohio Safety Boot EH 10 EH 300°C ASTM ASTM F2413-11 EH HRO ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Full grain tumbled brown leather ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Waterproof membrane ∙ Heat resistant outsole Brown, US 7-14 Full Grain Tumbled Leather PU/Rubber Outsole F48 Ele ctric Hazard Protection EH WIDE FITTING EE 118 Combining Innovation and Total Safety

MANUFACTURER DECLARES IF YOUR SteelitePORTWEST PRODUCT TESTED TO FEET HAD THE CHOICE FW65 Steelite TaskForce Boot 8 SD SRC 300°C ASTM HRO ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Water resistant upper ∙ Cement construction ∙ Lightweight EVA cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ Aggressive outsole pattern for high traction ∙ Achilles foam flex pad ∙ Removable EVA cushion footbed Black, US 7-14 Split Leather/ 1200D Oxford Phylon/Rubber Outsole F43 Achilles foam Breathable flex pad upper WIDE FITTING EE Uncompromising Protection for your Feet 119

PortwestR PRO FD10 Clyde Safety Boot 8 SRC 300°C HRO ASTM Protective ASTM F2413-11 Scuff Cap EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Wide fitting ∙ Protective TPU scuff cap ∙ Dual density sole unit ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole Black, US 6-14 Full-Grain Leather PU/Rubber - Outsole F47 MANUFACTURER DECLARES WIDE FITTING EE PRODUCT TESTED TO FD15 Eden Safety Boot 8 SRC 300°C HRO ASTM Quick ASTM F2413-11 release zip EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Wide fitting ∙ Quick release zip ∙ Dual density sole unit ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ Cold insulation Black, US 6-14 Full-Grain Leather PU/Rubber - Outsole F47 WIDE FITTING EE 120 Supreme Comfort even in Wet Conditions

FW16 SteelitePORTWEST Steelite Welted Safety Boot MANUFACTURER DECLARES 10 SRA 300°C ASTM PRODUCT TESTED TO HRO ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Welt construction ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ Padded collar for added comfort Black, US 7-14 Split Leather Rubber Outsole F07 WELT CONSTRUCTED OUTSOLE FW17 MANUFACTURER DECLARES Steelite Welted Safety Boot PRODUCT TESTED TO SRA 300°C ASTM HRO 10 ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Full grain Nubuck leather ∙ Welt construction ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole Honey, US 7-14 Full Grain Crazy Horse/Full Grain Nubuck Leather Rubber Outsole F07 WELT CONSTRUCTED OUTSOLE Built To Perform 121

CoPOmRTWpESTositeliteTM MANUFACTURER DECLARES FC64 PRODUCT TESTED TO Portwest Compositelite Trekker Shoe SRC 12 ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective composite toecap ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant outsole ∙ Removable EVA cushion footbed ∙ 3D breathable mesh lining ∙ 100% Metal free Black, US 4-14 Cow Suede Leather PU/PU Outsole F12 Suitable for AIRPORT SECURITY CHECKS FC21 MANUFACTURER DECLARES Portwest Compositelite PRODUCT TESTED TO Safety Boot SRC 12 ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective composite toecap ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant PU outsole ∙ Removable EVA cushion footbed ∙ 100% Metal free Black, US 4-14 Split Leather PU/PU Outsole F21 122 Safety Footwear that Always Performs

FC60 Portwest Compositelite MANUFACTURER DECLARES Operis Boot PRODUCT TESTED TO 10 SRC 300°C IMPROVED HRO ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective composite toecap ∙ Puncture resistant composite midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ 100% Metal free Black/Orange, US 5-14 Nubuck PU/Rubber Outsole F52 FC61 Portwest Compositelite Operis Shoe 10 SRC 300°C HRO ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective composite toecap ∙ Puncture resistant composite midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ 100% Metal free Black/Orange, US 5-14 MANUFACTURER DECLARES Nubuck PU/Rubber Outsole F52 FT15 PRODUCT TESTED TO SteelitePORTWEST Steelite Tove Trainer SRC 12 ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Black mesh air cushion insole ∙ Cement construction ∙ Dual density sole unit ∙ Slip, fuel and oil resistant rubber outsole Black/Green, US 6-13 KPU/ Mesh EVA/Rubber Outsole F53 Heavy on Features, Light to Wear 123

SteelitePORTWEST 360° ANKLE COLOR CHASSIS SYSTEM MANUFACTURER DECLARES PRODUCT TESTED TO FW69 Steelite Mustang Boot SRC 10 ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant TPU outsole ∙ 360 degree rubber external chassis system ∙ Removable EVA cushion footbed Black, Brown US 6-14 Crazy Horse Leather PU/TPU Outsole F12 How it works SRC FW57Rain/Water Sweat PU/PU SRA 0,60 (SRA+SRB) St0e,5e1lite All Weather Boot Leather SRB1000,,1279 Air SRC 200°C ASTM HRO Waterproof lining Inner lining ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant TPU outsole ∙ Waterproof membrane ∙ Removable EVA cushion footbed Black, US 6-14 Cow Nubuck Leather PU/TPU Outsole F12 124 Waterproof and Breathable Lining

ALL DAY LONG SteelitePORTWEST COMFORT FW33 Steelite Arx Safety Trainer 12 SRC 300°C HRO ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Cement construction ∙ Lightweight EVA cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ Removable EVA cushion footbed Black, US 4-14 Split Leather EVA/Rubber Outsole F15 MANUFACTURER DECLARES PRODUCT TESTED TO FW34 Steelite Lusum Safety Trainer 12 SRC 300°C HRO ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Cement construction ∙ Lightweight EVA cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ Removable EVA cushion footbed Black, US 4-14 Cow Suede Leather EVA/Rubber Outsole F15 For Light Industrial Use 125

SteelitePORTWEST MANUFACTURER DECLARES FW39 PRODUCT TESTED TO Steelite Ladies Safety Trainer 12 SRC 300°C HRO ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Cement construction ∙ Lightweight EVA cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ Removable EVA cushion footbed Black/Blue, Black/Pink US 4-10 Split Leather EVA/Rubber Outsole F15 MANUFACTURER DECLARES FW31 PRODUCT TESTED TO Steelite Mid Cut Nubuck Boot 10 SRA 300°C HRO ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Full grain Nubuck leather ∙ Cement construction ∙ Lightweight EVA cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ Removable EVA cushion footbed ∙ High wicking breathable mesh lining Honey, US 6-14 Full-Grain Nubuck Leather Phylon/Rubber Outsole F08 126 Superb Comfort for Long Durations of Wear

FW64 SteelitePORTWEST Steelite BREATHABLE, STRONG Trekker Shoe AND FLEXIBLE DESIGN SRC MANUFACTURER DECLARES PRODUCT TESTED TO 12 Hiker Style Safety Footwear 127 ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant PU outsole ∙ Removable EVA cushion footbed ∙ 3D breathable mesh lining Black, US 4-14 Cow Suede Leather PU/PU Outsole F12 FW63 Steelite Trekker Boot SRC 10 ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant PU outsole ∙ Removable EVA cushion footbed ∙ 3D breathable mesh lining Black, US 4-14 Cow Suede Leather PU/PU Outsole F12

SteelitePORTWEST INDUSTRY BEST SELLER IN THE USA FW10 Steelite Protector Boot SRC 12 200°C ASTM HRO ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant outsole ∙ Removable EVA cushion footbed Black, US 3-18 US Split Leather SIZES PU/PU 3-18 Outsole F03 MANUFACTURER DECLARES LOW CUT PRODUCT TESTED TO FOR COMFORT FW14 Steelite Protector Shoe SRC 12 200°C ASTM HRO ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant PU outsole ∙ Removable EVA cushion footbed Black, US 3-18 US Split Leather SIZES PU/PU 3-18 Outsole F03 128 Essential Safety Footwear at Affordable Prices

M etatarsal P rotection SteelitePORTWEST Mt FW22 Steelite Metatarsal Boot 12 SRC 300°C HRO ASTM Metatarsal ASTM F2413-11 protection EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Dual density sole unit ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ Metatarsal impact protection Black, US 6-13 Split Leather PU/Rubber Outsole F42 MANUFACTURER DECLARES CoPOmRTWpESTositeliteTM PRODUCT TESTED TO FW07 Portwest Compositelite Welders Boot 12 SRA 300°C HRO ASTM ASTM F2413-11 EN ISO 20345:2011 ∙ Protective composite toecap Quick release buckle ∙ Puncture resistant composite midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant rubber outsole ∙ Heat resistant outsole ∙ Ergonomic quick release buckle Black, US 6-14 Split Leather PU/Rubber Outsole F01 Specialist Protection 129

SteelitePORTWEST Best Seller for COLD CONDITIONS FW05 Fur lined Steelite Fur Lined Protector Boot SRC 10 200°C ASTM HRO ASTM F2413-11 EN ISO 20345:2011 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Direct injected dual density construction ∙ Lightweight PU cushioned midsole ∙ Slip, fuel and oil resistant PU outsole ∙ Cold insulating fur lining ∙ Removable EVA cushion footbed Black, US 5-14 Split Leather PU/TPU Outsole F12 Thumb loops for Portwest WORK easy donning R Fur lined for added FW75 warmth and comfort Neptune Rigger Boot SRC 10 ASTM Fur lined ASTM F2413-11 EN ISO 20345:2011 EN 13832-2:2006 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Chemical resistant ∙ Waterproof ∙ Energy absorbing heel ∙ Slip, fuel and oil resistant PVC/Nitrile outsole ∙ Cold insulation Black, Tan US 4-14 PVC/Nitrile PVC/Nitrile Outsole F06 130 Practical and Functional

Portwest WORK R FW95 Total Safety PVC Boot SRC 10 ASTM ASTM F2413-11 EN ISO 20345:2011 EN 13832-2:2006 ∙ Protective steel toecap ∙ Puncture resistant steel midsole ∙ Dual density PVC/Nitrile construction ∙ Slip, fuel and oil resistant PVC/Nitrile outsole ∙ 100% waterproof ∙ Washable nylon inner lining ∙ Chemical resistant Kick off spur Black, US 4-15 MANUFACTURER DECLARES Height 15” PRODUCT TESTED TO PVC/Nitrile PVC/Nitrile Outsole F06 Combining Innovation and Total Safety 131

USA Hand Protection Range A newly expanded range of hand protection styles that caters for all work and safety needs. Only the best materials and manufacturing methods are used in the production of this extensive and highly specialized range. 132 Next Generation Hand Protection in the USA

Choosing The Right Glove Size Option 1. Brand 13 12 Measure the Product 11 circumference of your Size 10 hand at the palm using 89 a tape measure. The Category 7 size chart, below, 6 explains which size EN Standards glove will fit you best. that style XS S M L XL 2XL 3XL 4XL Option 2. conforms to Product Code Place your right hand on the diagram with the line ANSI/ between your thumb and ISEA index finger. The line Mark closest to the right side of your hand indicates CE Mark RN Number the best fitting glove size. Fine Knitting Gauge This symbol denotes the knitting gauge of the glove liner 7 10 12 13 15 18 Heavy Glove \& Hand Size Chart as per Standard EN420 Hand Size 678 9 10 11 12 13 9\" 10\" 11\" 12\" 13\" Palm Circumferences (mm) 6\" 7\" 8\" 7½ 8 8½ 9 9½ Hand Length (inches) 6-6½ 6½- 7 7- 7½ 9½-10 10-10½- 10½-11 11½-12 12½ Minimal Glove Length (inches) 8½ 9 9½ L / 9 XL / 10 XXL / 11 3XL/12 4XL/13 Glove Size XS / 6 S / 7 M / 8 Portwest Cuff Color Code 133

Know your Gloves HAND PROTECTION IS CRITICAL - FIND THE RIGHT GLOVE FOR THE JOB Below we have compiled a guide to help you find and identify the right hand protection for the job. Below is a guide to materials used and the performance factors associated. This will aid in decision making to secure the right hand protection for the job. GENERAL GLOVE INDUSTRIAL USE: GLOVES LINER TYPE DISPOSABLE GLOVES FABRIC GLOVES LEATHER GLOVES CHEMICAL RESISTANCE KNITTED Highly breathable, close fitting with good GLOVES dexterity Made from rubber, Constructed using cotton Leather is a traditional Made from rubber, SEAMLESS Avoids hand irritations due to no seams, increase synthetic rubber or or fabric material, used material used to protect synthetic rubber or PVC. comfort PVC. Typically used to insulate the hands against injuries from These gloves protect in Food manufacture, from heat or cold. Used rough abrasive surfaces. hands from corrosives, engineering, medical for enhanced grip and Ideal for use in welding oils, and solvents and pharmaceutical handling slippery objects applications industries. SEWN \& Available with several types of construction and IMPREGNATED assembly, mainly cut and sewn. Coating is bound to the fabric for good resistance to abrasion. Sewing and impregnation process allows the manufacturing of thin gloves, for enhanced dexterity COATED/ Made by dipping a knitted or woven cloth liner DIPPED into the glove compound - the liner “supports” the compound and adds strength. Compound used enhances the mechanical performance, different compounds are used for different conditions GLOVE LINER MATERIAL COTTON POLYESTER NYLON ACRYLIC PARA HPPE GLASS FIBER LEATHER: SMOOTH LEATHER: SPLIT ARAMID GRAIN GRAIN Comfort/ Durability Stretch / Breathability Elasticity Insulation Cut High performance Cut Cut Resistance Durable, supple, oil \& Abrasion Resistance, Resistance Resistance, Comfort, water repellent Durable. Dry grip Abrasion Resistance / Heat Resistance DIPPING MATERIAL IMPACT PADS MATERIAL NITRILE NEOPRENE NITRILE FOAM PU LATEX PVC TPR TPV Excellent resistance Dry, wet and oil grip Oil and wet grip Good abrasion Dry and wet grip Good abrasion Impact Protection Impact Protection to snag, cut, resistance. Dry grip resistance. Dry, wet puncture and and oily grip abrasion. Dry grip UNSUPPORTED BEADED STRAIGHT PINKED CUFF STYLE GAUNTLET KNITWRIST SAFETY CUFF SLIP ON CUFF GLOVES Optimize liquid Additional Traditional SUPPORTED GLOVES Additional Securely fits Provides Easy donning, Molds are dipped protection length style, improved length which gloves in place additional economical directly into a compound with increased which edge grip A liner is dipped into a protects and prevent wrist design material, giving the cuff strength protects for ease of compound material. This forearm (4” dirt entering protection wearer maximum forearm donning and absorbent liner holds plus) the glove (2.5” in dexterity. There are from liquid glove removal provides improved comfort length) two options, unlined or runoff during wear and adds flock-lined with cotton strength and durability to or rayon polyester for the glove improved comfort 134

USA Hand Protection Standards Explained ANSI/ISEA 105 5.1.3 Abrasion Resistance 5.4 Heat and Flame Protection 5.4.1 Ignition Resistance and American National Standard for When tested in accordance with ASTM D3389-05, Standard Burning Behavior (or After- Hand Protection Test Method for Coated Fabrics Abrasion Resistance or ASTM Flame Time) D3884-09, Standard Guide for Abrasion Resistance of Textile This standard addresses the classification and testing of hand Fabrics (Rotary Platform, Double-Head Method), the gloves When tested in accordance with ASTM F1358-08, Test Method protection for specific performance properties related to abrasion resistance shall be classified against the levels listed for Effects of Flame Impingement on Materials Used in Protective chemical and industrial applications. Hand protection includes in Table 3 using the number of abrasion cycles to failure (test Clothing Not Designated Primarily for Flame Protection, the gloves, mittens, partial gloves, or other items covering the hand endpoint). These test methods shall be followed using H-18 glove materials ignition resistance and burning behavior shall be or a portion of the hand that are intended to provide protection abrasion wheels with a 500 gram load for levels 0 to 3 and a classified against the levels listed in Table 6, using ignition time against or resistance to a specific hazard. 1000 gramme load for levels 4 to 6. Using ASTM D3389-05 for and burn time. In order to be classified at a specific level, the coated glove fabrics or unsupported gloves, the end point at glove material shall meet each of the criteria at that specific level. 5.1 Mechanical Protection which the glove material is determined to fail shall be at the The average of a minimum of 3 specimens shall be used to report 5.1.1 Cut Resistance number of abrasion cycles just before the film or coating has the classification level. a hole abraded through it. Using ASTM D3884-05 for coated The new ASTM F2992-15 test replaces ASTM F1790-05 and ensures glove fabrics, the end point shall be when the first thread or Table 6. Classification for Ignition uniform testing plus increases the performance levels beyond the yarn is broken. The average of a minimum of 5 specimens shall Resistance and Burning Resistance old level 5. The sample is cut 15 times by a straight edge blade, be used to report the classification level. under load. A new blade is used for each cut. The data is then used Level Time Exposed After-Flame to determine the required load to cut through the material and this Table 3. Classification for Abrasion to Flame (s) time (s) in turns is equated to a cut level. The new levels are now prefixed 0 with the letter A. Resistance 1 3 >2 2 3 ≤2 Table 1 Classification for Cut Resistance Level (tested at 500 Abrasion cycles to fail 3 12 >2 g load) : 4 12 ≤2 Level Load (grams) <100 0 ≥ 100 - <200 1 ≥ 500 2 ≥ 1,000 A1 201-499 3 no ignition in either 3 or 12 second exposure period A2 500-999 Level (tested at A3 1000-1499 1000 g load) A4 1500-2199 4 ≥ 3,000 5.4.3 Conductive Heat Resistance A5 2200-2999 5 ≥ 10,000 When tested in accordance with ASTMF1060-08 Test Method A6 3000-3999 for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact, the gloves conductive heat A7 4000-4999 6 ≥ 20,000 resistance shall be classified against the levels listed in Table 8. Classification of glove performance shall be based on the A8 5000-5999 contact (surface) temperature at which both the time-to-second degree burn is equal to or greater than 15 seconds, and the A9 >6000 5.2 Chemical Protection alarm time is greater than 4 seconds. The average of a minimum of 5 specimens shall be used to report the classification level. 5.1.2 Puncture Resistance 5.2.1 Chemical Permeation Resistance Table 8. Classification for Conductive When tested in accordance with Clause 6.4 of EN 388:2003 When tested in accordance with ASTM F739-07, Standard Test Heat Resistance Protective gloves against mechanical risks, the gloves resistance Method for Permeation of Liquids and Gases through Protective against puncture shall be classified against the levels listed in Table Clothing Materials under Conditions of Continuous Contact Level Highest contact temperature(°C) 2, using the puncture force. the gloves chemical permeation shall be classified against the at which both time-to-2nd degree levels listed in Table 4 using the average standard breakthrough 0 burn > 15 seconds and alarm time> The average of a minimum of 12 specimens shall be used to report time (for each chemical tested). The average of a minimum of 1 4 seconds the classification level. 3 specimens shall be used to report the classification level. In 2 reporting permeation data for each chemical the permeation 3 < 80 Table 2. Classification for Puncture rate shall be reported in μg/cm2 min. It shall be permitted to 4 Resistance report the cumulative permeation in g/cm2 that occurs within 1 5 80 hour of the test for each chemical. 140 Table 4. Classification for Chemical Permeation 200 Level Table 2. Classification for Puncture Level Standard breakthrough time (minutes) 260 Resistance Level : Puncture (Newtons) 0 <10 320 0 <10 1 ≥ 10 1 ≥ 10 2 ≥ 30 2 ≥ 20 3 ≥ 60 3 ≥ 60 4 ≥ 120 4 ≥ 100 5 ≥ 240 5 ≥ 150 6 ≥ 480 ASTM F2675-13 This test method is used to measure and describe the Hazard Risk Minimum ATPV cal/ properties of hand protective products in response to Category cm2 Test Method For Determining Arc convective and radiant energy generated by an electric Ratings of Hand Protective Products arc under controlled laboratory conditions. There are 4 0 n/a Developed and Used for Electrical levels in the Hazard Risk Category rated by the ATPV (Arc 1 4 Arc Flash Protection. Thermal Performance Value). 2 8 3 25 4 40 135

European Hand Protection Standards PROTECTIVE GLOVES : GENERAL REQUIREMENTS EN374 Protective Gloves : Against Chemicals And Micro-Organisms EN 420: 2003 + A1 2009 This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapor transmission and absorption along with marking and information. PROTECTIVE GLOVES AGAINST MECHANICAL RISKS AKL EN 374-1: 2003 EN 388 - 2016 This European standard specifies the requirements for gloves to protect the user against chemicals and/or micro-organisms and EN388:2003 Standards specifies physical and mechanical aggression caused by abrasion, blade defines terms to be used. cut, tearing and puncture. EN388:2016 updates the existing standard with this new test method for abrasion, blade cut \& impact resistance. EN ISO 13997:1999 (TDM test) records cut results as a EN 374-2:2003 Newton value - the force of the blade on the glove material needed to cut through the material 20mm. The results are represented on a scale A-F. This European Standard specifies a test method for the penetration resistance of gloves that protect against chemicals and/or micro- organisms. EN388 Revised Coup Cut Test EN388 EN 374-3: 2003 2016 2003 This European Standard specifies the determination of the EN388:2016 EN388:2003 resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition • Max 60 Cut cycles • Unlimited Cut cycles of continuous contact. 1.3.1.2.E.P 1.3.1.2 1312EP REQUIREMENTS EN374 Gloves must prove that they are an effective barrier against liquids and micro-organisms. Performance level P 2016 Performance levels are according to Acceptable Quality Levels IMPACT RESISTANCE ONLY (AQL) whereby samples are taken from a batch of gloves Impact-resistant properties to 5J and tested during production for pinholes and leaks by either inflation with air or by filling with water. Performance levels A – F Gloves must meet at least level 2, to be considered micro- STRAIGHT BLADE CUT RESISTANCE: organism resistant. (TDM cut test) Measures the average load to (Level 1 = AQL 4.0) (Level 2 = AQL 1.5) (Level 3 = AQL 0.65) achieve the moment of cut-though 2016 EN374 The “Low Chemical Resistant” or “Waterproof” glove pictogram is ONLY to be used for those gloves that do not achieve a breakthrough time of at least 30 minutes against at least three chemicals from PERFORMANCE LEVELS 1-4 the defined list, but which comply with the penetration test. d: PUNCTURE RESISTANCE: Force required to pierce the sample with a standardized punch. Performance Levels 1-4 Code Chemical Class c: TEAR RESISTANCE: A Methanol Primary alcohol Maximum force required to tear the sample. B Acetone Ketone C Acetonitrile Nitrile compound Performance Levels 1-5 D Dichloromethane Chlorinated paraffin b: BLADE CUT RESISTANCE: (Coup cut test) Number of cycles required to damage the sample at constant speed. E Carbon disulphide Sulphur containing organic compound Performance Levels 1-4 F Toluene a: ABRASION RESISTANCE: G Diethylamine Aromatic hydrocarbon Number of cycles required to damage the sample at constant speed. Amine H Tetrahydrofurane Hetero-cyclic and ether TEST Level 1 Level 2 Level 3 Level 4 Level 5 compound I Ethyl acetate Ester Abrasion resistance(num- 100 500 2,000 8,000 - J n-Heptane Saturated hydrocarbon ber of cycles) K Sodium hydroxide 40% Inorganic base Blade cut resistance (index) 1.2 2.5 5 10 20 L Sulphuric acid 96% Inorganic Mineral Acid Coup test method 10 25 50 75 - Passage time measured (min) Performance index to permeation Tear resistance (N) 20 60 100 150 - > 10 1 Puncture resistance (N) > 30 2 > 60 3 EN ISO 13997:1999 TDM Level A Level B Level C Level D Level E Level F > 120 4 > 240 5 Cut resistant test levels (N) 2 5 10 15 22 30 > 480 6

EN ISO Protective Gloves: Mechanical Vibration And Shock 10819 EN 10819: 1996 This European Standard specifies a method for the laboratory measurement, the data analysis and reporting of the vibration transmissibility of gloves in terms of vibration transmission from a handle to the palm of the hand in the frequency range from 31.5 Hz to 1250 Hz. The standard is intended to define a screening test for the vibration transmission through gloves. EN407 Protective Gloves Against Thermal Risks Protective Clothing: Electrostatic (Heat and/or Fire) Properties EENN11114499 EN 407: 2004 EN 1149-1:2006 This standard specifies thermal performance for protective gloves This European Standard specifies a test method for materials against heat and/or fire. The heat and flame pictogram is accompanied intended to be used in the manufacturing of electrostatic by a 6 digit number. dissipative protective clothing (or gloves) to avoid incendiary discharge. This test method is not applicable for materials to be 131212 used in the manufacturing of protective clothing or gloves against mains voltages. REQUIREMENTS EN 1149:2008 PERFORMANCE LEVELS 1-4 This is the harmonized European standard for protective clothing- f: RESISTANCE TO A LARGE MELTING METAL SPRAY: protection against the danger caused by static electricity. This Amount of spray required to raise the glove to a certain temperature. standard is not applicable for protection against mains voltages. PERFORMANCE LEVELS 1-4 ESD - (Electrostatic Discharge) e: RESISTANCE TO SMALL MELTING METAL SPRAY: Amount of spray required to raise the glove to a ESD gloves are used to divert static electricity. Surface resistivity is certain temperature. tested according to method specified in EN1149-1 but test sample must meet the requirements of EN1149-5. PERFORMANCE LEVELS 1-4 d: RESISTANCE TO RADIATING HEAT: Time required to raise a given temperature level. PERFORMANCE LEVELS 1-4 ENN55111 Protective Gloves Against Cold c: RESISTANCE TO CONVECTIVE HEAT: Time during which the glove is able to delay the transfer of i EN 511:2006 heat of a flame. 331 The European Standard specifies the requirements and test PERFORMANCE LEVELS 1-4 methods for gloves which protect against conductive cold down b: RESISTANCE TO CONTACT HEAT: to -50 degrees Celsius. This cold can be linked to the climate Temperature (within the range of 1000C to 5000C) at which the conditions or an industrial activity. person wearing the gloves will not feel any pain (for a period of at least 15 seconds). REQUIREMENTS PERFORMANCE LEVELS 1-4 PERFORMANCE LEVELS 0-1 a: RESISTANCE TO FLAMMABILITY: c: WATER PENETRATION Time during which the material remains lit and continues to be consumed after the ignition source has been eliminated. PERFORMANCE LEVELS 1-4 b: RESISTANCE TO CONTACT COLD B: RESISTANCE TO CONTACT HEAT: THRESHOLD TIME (Second) PERFORMANCE LEVELS 1-4 PERFORMANCE LEVEL CONTACT TEMPERATURE a: RESISTANCE TO CONVECTIVE COLD - (°C) ≥15s ≥15s 1 100°C ≥15s 2 250°C ≥15s 3 350°C 4 500°C EN12477 Protective Gloves For Welders CE Food Safe EN 12477: 2001 European legislation with respect to Food Contact Materials (Directive EC1935/2004) requires that food contact materials shall This European Standard specifies requirements and test methods for not transfer their ingredients to food and must not modify the protective gloves for use in manual metal welding, cutting and allied organoleptic properties (ie. color, smell, texture and taste) of the processes. According to their performance, protective gloves for welders food. Products intended for food contact shall be labeled as such. are classified into two types. 137 Type A: Lower dexterity (with higher other performance) Type B: Higher dexterity (with lower other performance).

Hand injury is one of the most common and frequent complaints in the workplace. This range of gloves provides vital protection against impact to the hand from multiple hazards. A721 Anti Impact Grip Glove - Nitrile 96 13 ANSI CUT 12 ANSI/ISEA 105 EN 420 , EN 388: 2016 ∙ Maximum impact protection using TPR pod technology ∙ Reinforced thumb crotch and padded palms ∙ Hook and loop strap for safe secure fit ∙ Nitrile sandy coating for exceptional grip in water, grease or oil contact ∙ Palm dipped to increase dexterity and ventilation ∙ 100% Breathable seamless liner TPR, Polyester, Nitrile Yellow/Orange S-3XL EN388 EN388 ANSI 2003 2016 A3 4.2.4.1. 2.1.4.2.X. CUT A729 A722 Fleece lined Anti Impact Cut Resistant Glove A729 Anti Impact Cut Resistant Therm Glove 72 13 ANSI CUT 12 ANSI/ISEA 105, EN 420, EN 388, EN 388 2016, EN 511 (A729) ∙ Maximum impact protection using TPR pod technology ∙ ANSI cut level A4 ∙ Available in a lined (A729) and unlined (A722) version for all climates ∙ Hook and loop strap for safe secure fit ∙ Nitrile sandy coating for exceptional grip in water, grease or oil contact ∙ Palm dipped to increase dexterity and ventilation ∙ 100% Breathable seamless liner TPR, Glass fiber, HPPE, Polyester, Nitrile A722: Gray M-3XL | A729: Gray S-3XL EN388 ANSI EN388 EN388 2003 2016 EN511 2016 A4 4.5.4.3. CUT 4.4.4.3.C.P. X. 2. X. 4.X.4.2.C.P. (A722 Only) (A729 Only) 138 Anti-Impact Gloves for Maximum Protection

A001 Glove Clip X10 40 ∙ Easy release and attach system ∙ Gloves are kept safe and secure Acetal Copolymer Black A726 I N S U L AT E X TM ermal Insulation Aqua-Seal Pro Glove 72 ANSI 12 ANSI/ISEA 105 EN 420, EN 388, EN 388: 2016, EN 511 ∙ 100% Waterproof membrane ∙ Maximum impact protection using TPR pod technology ∙ Insulatex lining for protection in cold conditions ∙ Reflective trimmings for safe visibility ∙ PVC dotted palm for enhanced grip ∙ Highly durable synthetic leather with elastane and neoprene Synthetic Leather, Elastane, Neoprene, Insulatex, PVC, TPR Orange/Blue L, XL EN388 EN388 EN511 ANSI 2003 2016 2.2.1. 4.3.3.2. 3.2.3.3.X.X. 3 ABRASION A724 Safety Impact Glove Unlined A725 Safety Impact Glove Lined I N S U L AT E X TM ermal Insulation 72 ANSI 12 ANSI/ISEA 105 EN 420 , EN 388 , EN 511 (A725) ∙ Maximum impact protection using TPR pod technology ∙ Available in a lined (A725) and unlined (A724) version for all climates ∙ Oil and water resistant ∙ PVC dotted palm for enhanced grip ∙ Highly durable synthetic leather with elastane and neoprene Synthetic Leather, Elastane, Neoprene, PVC Yellow L, XL EN388 ANSI EN511 2003 3 1.2.X. 4.3.3.2. ABRASION (A725 Only) Keep Hands Warm, Dry and Safe from Impact 139

HIGH PERFORMANCE GLOVES A745 Big Bear 48 ANSI 12 ANSI/ISEA 105 CUT EN 420, EN 388 2016 ∙ The Big Bear glove is designed for action in the toughest environments ∙ Premium leather with a reinforced palm for ultimate durability ∙ TPR Exo-Skeleton provides excellent impact protection to the back of the hand ∙ Highly protective cut resistant liner for added security against cut hazards ∙ Wrist strap fastening ensures a secure and comfortable fit ∙ High cut resistant liner Full-Grain Cow Leather, TPR Gray L-4XL EN388 ANSI 2016 3.X.4.2.F. A6 CUT Specially designed to reduce the effects of vibration A790 Anti Vibration Glove 100 10 ANSI 10 ANSI/ISEA 105 EN 420 EN 388 EN 10819 ∙ Specially designed to reduce the effects of vibration ∙ For use with jack hammers, concrete breakers, etc. ∙ Specially formulated rubber chloroprene ∙ Anti-vibration pods on palm only ∙ 100% Breathable seamless liner 50% Cotton, 45% Nylon, 5% Rubber Chloroprene Black M-XL EN388 EN ISO 10819 ANSI 2003 A4 X.3.4.3. TTRRMH==00..5652 CUT 140 Absorbs Impact Energy to Protect Hands

MECHANIC HIGH PERFORMANCE GLOVES A710 Tradesman – High Performance Glove 144 ANSI 12 ANSI/ISEA 105 EN 420 , EN 388 ∙ Reinforcement stitching on palms and fingers EN388 ANSI ∙ Built in sweat wipe 2003 ∙ Additional knuckle padding for extra 2.1.4.1. 3 protection ABRASION ∙ Highly durable synthetic leather with elastane and neoprene Synthetic Leather, Rubber, Elastane, Neoprene Black M-XL A730 Supergrip - High Performance Glove 144 ANSI 12 ANSI/ISEA 105 EN 420 , EN 388 ∙ Designed for maximum grip performance EN388 ANSI ∙ Extra grip silicon covered palm with 2003 4 reinforced thumb and breathable sidewalls ∙ Low linting construction for minimal contamination ∙ Hook and loop strap for safe secure fit ∙ Designed for tasks that require reinforced abrasion resistance Synthetic Leather, Silicone, 3.1.2.1. ABRASION Elastane Black M-XL A740 Powertool Pro - High Performance Glove 144 ANSI 12 ANSI/ISEA 105 EN 420 , EN 388 ∙ Thumb, middle and index finger tips left open EN388 ANSI for precision handling 2003 3 ∙ Reinforcement stitching on palms and fingers ∙ Reinforced padded palms ∙ Highly durable synthetic leather with elastane and neoprene Synthetic Leather, Rubber, Elastane, Neoprene Black M-XL 2.1.4.1. ABRASION High Performance Gloves for Tough Jobs 141

PW NANO 6000 Ground Breaking Protection Advanced Nano-Tech Protection AP62 AP02 Portwest are delighted Super water and oil-repellent to bring to the market surface designed for todays work the latest innovation environments glove fabric technology. With the combination of a chemical and physical The PW Nano 6000 range have been approach, a specially formulated agent has been developed with a revolutionary coating developed to deliver an innovative range of gloves which which makes the glove super keep hands dry and protected. hydrophobic and oleophobic. This creates a barrier between the glove and the underlying surface, from water, oil and other liquids. This barrier is unlike anything ever seen before and is revolutionary in the glove industry. In addition to the proprietary Nano Technology the PW Nano 6000 range also offers superior abrasion resistance allowing it to be used in a variety of tasks. Nanotexture Technology Enables Liquid to Bounce 142 Off the Surface, Deflecting Penetration

AP02 Thermo Pro Ultra 216 10 12 ANSI ANSI/ISEA 105 EN 420 EN 388 EN 388:2016 EN 511 ∙ Using innovative technology this glove repels water and heavy oils ∙ Twin liner traps heat and allows breathability ∙ Sandy palm finish gives improved grip Nylon, Nitrile Sandy Fleece lined Orange/Black S-XXL EN388 EN388 EN511 ANSI 2003 2016 A3 4.2.4.2 4.2.4.2.X. X.2.X. CUT AP62 Dermiflex Aqua Glove 360 15 12 ANSI ANSI/ISEA 105 EN 420 EN 388 EN 388:2016 ∙ Using innovative technology this glove repels water and heavy oils ∙ Flexible sandy nitrile coating offers great grip in wet and dry conditions ∙ 15 gauge liner for extra dexterity Nylon, Elastane, Nitrile Foam Gray/Black S-XXL EN388 EN388 ANSI 2003 2016 4.1.2.1 4. 1. 3. 1. X. 3 ABRASION Optimum Liquid Repellency 143

EXCEPTIONAL CUT RESISTANCE A667 Claymore AHR Cut Glove 144 13 ANSI 12 ANSI/ISEA 105 CUT EN 420, EN 388: 2016 ∙ Optimized innovative design ∙ Over 5000 grams of cut resistance achieving ANSI Cut A7 ∙ Maximum cut resistance according to EN388:2016 ∙ Coating is double sandy nitrile for excellent durability and grip in wet and dry conditions ∙ Seamless 13 gauge liner for increased wearer comfort HPPE, Steel Fiber, Glass fiber, Nitrile Sandy Blue/Black M-XXL EN388 ANSI 2016 4.X.4.3.F. A7 CUT ARC FLASH A780 Arc Grip Glove 144 13 ANSI 12 ANSI/ISEA 105 ARC FLASH ASTM F2675-13 EN 420 EN 388: 2016 EN 407 EN 1149 ∙ High level of protection against ARC flash burns, cuts and flames ∙ 13-gauge, flame-resistant aramid liner, increases dexterity and hand movement ∙ Flame-resistant neoprene coated palm allows for excellent grip ∙ ARC flash level 2 (ATPV 9.5cal/cm2) ∙ EN 388 :2016 CUT LEVEL D, ANSI: Cut A4 ∙ Anti-static properties Aramid, Neoprene Green/Black M-XXL EN388 EN407 ANSI 2 2016 A4 ARC 4.X.4.2.D. X.1.X.X.X.X. CUT ASTM F2675-13 144 Tough and Durable for more Demanding Applications

THERMAL PROTECTION A145 Cold Grip Glove - Latex 120 7 ANSI 12 ANSI/ISEA 105 EN 420, EN 388, EN 511 ∙ Fully dipped thumb for increased coverage ∙ Specially designed for use in cold conditions ∙ Crinkle latex grip offers excellent grip ∙ Palm dipped to increase dexterity and ventilation ∙ Warm 7 gauge acrylic liner for extreme cold protection Acrylic, Latex EN388 EN511 ANSI Orange/Blue M-XXL 2003 A2 1.2.3.1. X.1.X. CUT A146 Arctic Winter Glove - Nitrile Sandy 144 15 ANSI 12 ANSI/ISEA 105 EN 420, EN 388, EN 511 ∙ Specially designed for use in cold conditions ∙ Twin liner traps in heat through increased insulation ∙ Flexible sandy nitrile coating offers great grip in wet and dry conditions ∙ 3/4 dipped for increased protection ∙ 100% Breathable seamless liner Nylon, Nitrile Sandy EN388 EN511 ANSI Black L-XXL 2003 Yellow/Black M-XXL A2 4.1.4.1. 0.2.X. CUT A140 Thermal Grip Glove 144 10 ANSI 12 ANSI/ISEA 105 EN 420 , EN 388 , EN 511 ∙ Specially designed for use in cold conditions ∙ Crinkle latex grip offers excellent grip ∙ Palm dipped to increase dexterity and ventilation ∙ Warm 10 gauge acrylic liner for cold protection Acrylic, Latex EN388 Orange/Black M-XXL 2003 EN511 Yellow/Black M-XXL 1.1.4.2. X.1.X. ANSI A1 CUT Maximum Grip - Maximum Insulation 145

CUT CUT RESISTANT GLOVES The New Cut A641 Color System Red Cut - PU The newest addition to the Portwest 144 13 ANSI CUT Cut collection is 12 the introduction of the new cut color ANSI/ISEA 105 system. This color EN 420, EN 388, EN 388:2016 coded system uses 3 colors to clearly ∙ Red - For minimal risk tasks identify the cut level ∙ Smooth PU coating for increased abrasion resistance of protection these ∙ Palm dipped to increase dexterity and ventilation three gloves can ∙ 100% Breathable seamless liner provide. HDPE, Glass fiber, PU Red M-XXL EN388 EN388 ANSI 2003 2016 A1 4.1.2.1. 2.0.2.1.X. CUT A643 Amber Cut - Nitrile Foam Red - Cut Level 1 144 13 ANSI Amber - Cut Level 3 12 Green - Cut level 5 ANSI/ISEA 105 CUT EN 420, EN 388, EN 388:2016, CE FOOD SAFE ∙ Amber - For moderate cut protection ∙ Nitrile foam coating for excellent grip in wet and dry conditions ∙ Palm dipped to increase dexterity and ventilation ∙ 100% Breathable seamless liner HDPE, Glass fiber, Nitrile Foam Amber M-XXL EN388 2003 EN388 ANSI 2016 A2 4.3.4.2. 4.2.4.2.B. CUT The advantage of A645 this system means that Health and Green Cut - Nitrile Foam Safety officers can determine if a worker 144 13 ANSI is using the correct 12 level of cut PPE for a particular job. They ANSI/ISEA 105 CUT can conveniently do EN 420, EN 388, EN 388:2016, CE FOOD SAFE this from a distance just by identifying ∙ Green - Maximum EN cut protection levels the color of the ∙ Superb abrasion and tear resistance gloves worn. This ∙ Nitrile foam coating for excellent grip in wet and dry color coded system is a great system that conditions more and more work ∙ Palm dipped to increase dexterity and ventilation environments are ∙ 100% Breathable seamless liner now implementing and specifying when HDPE, Glass fiber, Nitrile Foam purchasing cut protection gloves. Green M-XXL EN388 EN388 ANSI 2003 2016 A4 MAXIMUM CUT PROTECTION 4.5.4.4. 4.4.4.4.D. CUT 146 Easily Identify Protection Levels

CUT HANDLE SHARP OBJECTS SAFELY AP31 Senti Cut Lite Glove 480 18 ANSI CUT 12 ANSI/ISEA 105 EN 420, EN 388, EN 388:2016 ∙ Excellent for jobs requiring high dexterity ∙ 18 gauge cut liner for extra dexterity ∙ Secure grip in dry and light oily handling environments ∙ 100% Breathable seamless liner ∙ Perfect for intricate tasks ∙ Low linting construction for minimal contamination EN388 EN388 ANSI HDPE, PU 2003 2016 A3 Gray S-XXL CUT 3.3.4.2. 3.2.4.2.B. A620 LR Cut PU Palm Glove 144 13 ANSI CUT 12 ANSI/ISEA 105 EN 420, EN 388, EN 388:2016, EN 407 ∙ ANSI cut level A2 ∙ Smooth PU coating for increased abrasion resistance ∙ Palm dipped to increase dexterity and ventilation ∙ 100% Breathable seamless liner HPPE, Glass fiber, PU VA620 288 Gray XS-3XL 24 EN388 EN388 EN407 ANSI Vending LR Cut 2003 2016 PU Palm Glove A2 4.3.4.1. 4.X.4.1.B. X.1.X.X.X.X. CUT Gray M-XXL A622 MR Cut PU Palm Glove 144 13 ANSI CUT 12 ANSI/ISEA 105 EN 420, EN 388, EN 388:2016, EN 407 ∙ ANSI cut level A3 VA622 288 ∙ Superb abrasion and tear resistance 24 ∙ Smooth PU coating for increased abrasion resistance ∙ Palm dipped to increase dexterity and ventilation ∙ 100% Breathable seamless liner HPPE, Glass fiber, PU Gray M-3XL EN388 EN388 EN407 ANSI Vending MR Cut 2003 2016 PU Palm Glove A3 Gray M-XXL 4.5.4.3. 4.X.4.3.C. X.1.X.X.X.X CUT The Ultimate Protection from Cuts and Lacerations 147

CUT CUT RESISTANT GLOVES A625 Vis-Tex Cut Resistant Glove - PU 144 13 ANSI CUT 12 ANSI/ISEA 105 EN 420, EN 388, EN 388:2016, EN 407 ∙ ANSI Cut level A4 ∙ High-visibility liner ∙ Tested for both cut and heat protection ∙ PU foam coating for excellent grip in wet and dry conditions ∙ Palm dipped to increase dexterity and ventilation ∙ 100% Breathable seamless liner HPPE, Glass fiber, PU Orange/Black, Yellow/Black EN388 EN388 EN407 ANSI 2003 2016 M-XXL A4 4.5.4.3. 4.4.4.3.D. X.1.X.X.X.X CUT AP52 Dexti Cut Ultra Glove 360 13 ANSI CUT 12 ANSI/ISEA 105 EN 420, EN 388 , EN 388:2016 ∙ ANSI cut level A3 for superior protection ∙ Sandy finish for exceptional grip in water, grease or oil ∙ Reinforced thumb crotch for extra protection and durability ∙ Low linting construction for minimal contamination Reinforced HPPE, Nitrile, Nitrile Sandy EN388 ANSI protection for Blue/Black S-XXL 2016 thumb crotch A3 EN388 area 2003 CUT 4.5.4.2. 4.4.4.2.C. AP32 Dexti Cut Pro Glove 360 13 ANSI CUT 12 ANSI/ISEA 105 EN 420, EN 388 , EN 388:2016 ∙ Excellent for jobs requiring high dexterity ∙ Protects against cuts and abrasion ∙ Sandy finish for exceptional grip in water, grease or oil ∙ Reinforced thumb crotch for extra protection and durability ∙ Ergonomic design to reduce hand fatigue Reinforced HPPE, Nitrile, EN388 EN388 ANSI protection for Nitrile Sandy 2003 2016 thumb crotch Black/Gray S-XXL A2 area 4.3.3.2. 4.2.3.2.B. CUT 148 For Safe Handling of Sharp Objects