奥德工业温度控制设备目录 - 电子画册在线预览、各类电子画册在线制作-云展网平台

TEMPERATURECONTROLEQUIPMENTSELECTION GUIDE

TEMPERATL

ABOUT AODE 01
HEATING UNIT SERIES 07
CHILLER SERIES 21
HEATING AND COOLING UNIT SERIES 33
BOILER SERIES 47
PUMP SERIES 50
ENERGY STORAGE SERIES 53
HEAT EXCHANGER SERIES 55
HEATER SERIES 57
SERVICE SYSTEM 59
APPLICATION AREA 61
PIPELINE INSTALLATION DRAWING 63
SUCCESSFUL CASES 65
OUR PARTNERS 67

JRE CONTROL

DCOV

22 YEARS+ ACCUMULATION

60000+ PRODUCTION AREA

12000+ CUSTOMER CASES

10000+ PRODUCTION CAPACITY

300+ PATENTS

ABOUT AODE关于奥德

Founded in Shenzhen in 2004 and established its headquarters in Suzhou in 2007, AODE has been focusing on the industrial temperature control field and is a temperature control equipment manufacturer integrating R&D, production and sales. After 22 years of innovative development and precipitation, AODE products from a single heating series development to heating, cooling, cooling and heating in one and centralised cooling, centralised heating of a full range of product matrix, with different industries to provide diversified, customised temperature control product solutions. At present, there are 8 production bases in East China and South China, and sales and service centres in Tianjin, Chongqing and Qingdao. So far, AODE has successfully provided more than 12,000 enterprises with efficient and stable temperature control product services, and set up abenchmark in the industry.

AODE INDUSTRIAL TEMPERATURECONTROL EQUIPMENT PLATFORM奥德工业温控设备平台

5+ Temperatue control quipment

3+ core component

AODE奧德

FOCUS ON THE INDUSTRY

Chemical

Integrated die-casting

Rubber

New energy

Composite material

5G material

Testing

3C communication

Sheet/Plate/Film

Semiconductor

INDUSTRIAL TEMPERATURECONTROL SYSTEM INTEGRATION工业温控装备系统集成

The temperature control equipment system developed by AODE integrates a centralized heating component, including gas thermal oil boilers, steam/water boilers, and electric heating thermal oil furnaces; the centralized cooling module mainly consists of large screw compressors; the machine-side temperature control module unit mainly meets the individual precise temperature control requirements of various areas within the factory.

DCS INTELLIGENT CONTROL SYSTEMDCS智能控制系统

DCS is a distributed control system; main features are to decentralized control and centralized manage. DCS is to control multiple control points in a production process by several controllers (process stations). Each controller is connected through network and can exchange data. Computer work stations are applied in production control process, communicate with controllers and collect production data and convey operation instruction by networks.

SOFTWARE ARCHITECTURE

HARDWARE ARCHITECTURE

HEATING UNIT SERIES制热系列

Mould temperature machine series products mainly include oil temperature machine, water temperature machine, 200 °C high temperature water temperature machine, 320 °C die-casting mould temperature machine, rapid cooling and rapid heating of high-gloss mould temperature machine, 400 °C ultra-high-temperature oil temperature machine, electrically heated organic heat carrier furnace, etc., are widely used in the chemical industry, pharmaceuticals, new energy automobile integrated die-casting, energy storage, 5G materials, 3C communications, circuit boards, semiconductors, the military industry, aerospace, rail transportation, auto parts Die-casting, optical lens, sheet/plate/film, dyeing and printing, rubber, injection moulding, packaging, drying, compound material thermoforming, carbon fibre products and other industries.

FEATURES

■Return oil/water temperature display, Automatic exhaust

■Heating power switch, By-pass pressure release circuit

■ Temperature control range;+25°C\~400 °C(oi) 1+25°C\~180°C(water)

■ Control mode:imported microcomputer or PLC (optional)

Electric components:SIEMENS、Weidmuller、ABB、LS、OMRON

■Safety protection: fault display, easy repair and maintenance

■ Explosion-proof, Blowing back oil/water (optional)

RS485 communication(optional)

OPTICAL GRADE MOLD TEMPERATURECONTROL MACHINE光学级模具温度控制机 +25℃+160/180/200℃

High precision, high efficiency, low energy consumption

• High security, low failure rate, low maintenance cost

•More expansion and optional features

•Integrated, intelligent, and versatile

ITEM		UNIT	WLS-160H60-8	WLS-160H90-12	WLS-180H60-8	WLS-180H90-12	WLS-200H120-16 W	LS-200H150-24
Temp control range		℃	water temperature+20°℃~+160°℃		water temperature+20°℃~+160°℃		water temperature+20°℃~+160°℃
Power	Voltage	V	AC380/220V 50Hz 3P
Supply	Breaker	A	32/40	40/50	32/40	40/50	63/80	80/100
Cooling	Flow Rate	L/min	20+
Water	Pressure	bar	2bar~3bar
	Medium	1	Clean Water
Heater	Control	1	SSR
Heater	Capacity	KW	8	12	8	12	8*2(16kw)	12*2(24kw)
Booster	Pressure	bar	16		1	6	20
Pump	Output	W/2P		55	55		150
	Pressure	bar	4bar	5bar	4bar	5bar	5bar	6bar
Pump	Traffic	L/min	60	90	60	90	120	150
	Output	KW/3P	1.1	1.7	1.1	1.7	2.5	3
Cooling Method		1	Direct Cooling		Direct + Indirect Cooling		Direct + Indirect Cooling
Water Level Detection		1	Comprehensive data detection
Temperature Sensor		1	PT100
Product Weight		KG	70	85	70	85	110	130
Size(L×W×H)		mm	300990850	3501000850	300990850	3501000850	300990850	3501000850

STANDARD WATERTEMPERATURE CONTROL UNIT标准水温机 +25℃+100℃

ITEM	UNIT	AWM-05(A)	AWM-10(A)	AWM-20	AWMD-10
Temp control range	$^ { \circ } \mathsf { C }$	Inlet water temperature +25 °C~100 °C
Temp control accuracy	$^ { \circ } \mathsf { C }$	PID±1
Power supply	1	AC 3N-380/400V -50HZ
Heat transfer medium	1	Water
Cooling method	1	Direct cooling
Heating capacity	KW	6	9	12	9+9
Motor power	KW	0.37	0.75	1.5	0.75+0.75
Pump flow	L/min	16	133/22	167	133+133
Pump head	m	22	14/28	19	14+14
Max. power consumption	KW	6.37	9.75	13.5	19.5
Alarm function	1	Pump reversal/Water shortage/Overload
Cooling water pipe	inch	1/2	1/2	1/2	1/2
Circulating water pipe	inch	3/8*2	3/8*4	1	(3/84)2
Size(L×W×H)	mm	650288645	650288645	650288645	800420750

STANDARD OILTEMPERATURE CONTROL UNIT标准油温机 +45℃+180℃

ITEM	UNIT	AOS-05A	AOS-10(A)	AOS-20	AOS-30
Temp control range	℃	Inlet water temperature +45 °C-180 °C
Temp control accuracy	℃	PID±1
Power supply	1	AC 3N-380/400V-50HZ
Heat transfer medium	1	Thermal conductive oil
Cooling method	1	Indirect cooling
Heating capacity	KW	6	9	12	12
Motor power	KW	0.37	0.75	1.5	2.2
Pump flow	L/min	16	133/22	137	233
Pump head	m	22	14/28	15	19
Max. power consumption	KW	6.37	9.75	13.5	14.2
Alarm function	1	Pump reversal/Oil shortage/		Overload/Abnormal	heating
Cooling water pipe	inch	1/2	1/2	1/2	1/2
Circulating oil pipe	inch	3/8*2	3/8*4	1	1.2
Size(L×W×H)	mm	650288735	650288735	650288735	900420850

HIGH-TEMPERATURE WATERTEMPERATURE CONTROL UNIT高温水温机 +25℃+180℃

ITEM	UNIT	AEWH-10	AEWH-20	AEWT-10	AEWT-20	AEWT-30
Temp control range	℃	Inlet water temperature+25°C-150°C		Inlet water temperature+25°C-180°℃
Temp control accuracy	℃	PID ± 1
Power supply	1	AC 3N-380/400V -50HZ
Heat transfer medium	1	Water
Cooling method	1	Indirect cooling
Heating capacity	KW	9	12	9	12	24
Motor power	KW	0.75	1.5	0.75	1.5	2.2
Pump flow	L/min	25	47	112	137	233
Pump head	m	40	35	14	15	19
Max. power consumption	KW	9.75	13.5	9.75	13.5	26.2
Alarm function	1	Pump reversal/Oil shortage/Overload/Abnormal heating
Cooling water pipe	inch	1/2	1/2	1/2	1/2	1/2
Circulating water pipe	inch	3/8*2	1	3/8*4	1	1.2
Size(L×W×H)	mm	700360780	700360780	700360780	700360780	12004201000

LARGE FLOW WATERTEMPERATURE CONTROL UNIT大流量水温机 +25℃+98℃

ITEM	UNIT	ARD-30-24	ARD-30-36	ARD-40-48	ARD-50-72	ARDN-50-72	ARDN-75-90
Temp control range	℃	Inlet water temperature+25°C~98°℃
Temp control accuracy	℃	PID±1
Power supply	1	AC 3N-380V/400V-50HZ+PE
Heat transfer medium	1	Water
Cooling method	1	Direct cooling
Heating capacity	KW	24	36	48	72	72	90
Motor power	KW	2.2	2.2	3.0	4.0	3.0	5.5
Pump flow	L/min	233	233	255	267	267	333
Pump head	m	19	19	20	30	34	47
Max. power consumption	KW	26.2	38.2	51	76	75	95.5
Alarm function	1		Pump reversal/Water shortage/Overheating/O			verloading/High pressure
Cooling water pipe	inch	1/2	1/2	1/2	3/4	3/4	3/4
Circulating water pipe	inch	1.2	1.2	1.5	1.5	2	2
Size(L×W×H)	mm	900420950	12004201100	14005001250			17205501350

TEMPERATURE CONTROL UNIT TCU温控单元

The AODE TCU temperature control system uses the client's utility cooling and heating source (primary system) to supply heat and cooling to the TCU temperature control system (secondary system), and uses the secondary system to precisely control the temperature of the process system, and realises that there is only one heat transfer medium in the reactor jacket.

TCU GLYCOL WATER SERIES -40℃+140℃

The use of heat exchangers for hot and cold heat transfer, the use of high and low temperature heat source for heat transfer and temperature control, you can achieve a wide temperature range, can achieve -40 \~ 140 °C full range of temperature control.

Customised design of temperature control system for different cold and heat sources.

Built-in electric heater for auxiliary heating, so that the TCU temperature control system can reach a higher design temperature; the maximum design temperature can reach 200 °C, the operating temperature of 180 °C.

TCU HEAT TRANSFER OIL SERIES -80℃ +260℃

Use the control valve to control and regulate the hot and cold sources, heat exchanger for hot and cold heat transfer, 2-stage circulating pump circulates the constant temperature, so that the temperature of the process equipment is stable.

Using external high and low temperature heat source for heat transfer and temperature control, it can reach a wide temperature range, and can realise the full range temperature control of-80\~300°C.

It can use the higher limit temperature of the AODE temperature control equipment, so that the TCU temperature control system can reach a more extreme design temperature; the highest temperature can reach 400°C, and the lowest temperature can reach -110°C.

ITEM	UNIT	ARDJ-20	ARDJ-50	ARDJ-75
Temp control accuracy	℃	PID ± 1
Power supply	1	3PAC380V/480V 50HZ(3phase+Earth)
Heat transfer medium	/	Glycol aqueous solution
Cooling method	/	Indirect cooling (chilled water/cooling water)
Heating method	1	Indirect heating (steam/high-temperaturethermal oil)/direct heating
Pump Horsepower	hp	2	5.0	7.5
Pump flow	L/min	200	300	533
Pump head	m	20	30	50
Max. power consumption	KW	1.5	4	5.5
Cooling water pipe	inch	1.5 "	2"	3"
Circulating water pipe	inch	1.5 "	2"	3"
Expansion tank volume	L	100	200	500

ITEM	UNIT	AYJ-20	AYJ-50	AYJ-75
Temp control accuracy	℃	PID ± 1
Power supply	1	3P AC380V/480V 50HZ(3phase+Earth)
Heat transfer medium	1	thermal grease
Cooling method	1	Indirect cooling (chilled water/cooling water)
Heating method	1	Direct or indirect heating
Motor power	KW	1.5	3.0	4.0
Pump flow	m3/h	6	16	12.5/18
Pump head	m	28	32	50/38
Max. power consumption	KW	1.5	3	4
Circulating medium piping	inch	1"	1.2 ⅡI	1.5 "
Cold and heat source piping	inch	3/4"	1"	1.2 "

ELECTRIC HEATING ORGANIC HEATTRANSFER MATERIAL HEATER电加热导热油炉系列

Explosion-proof device、 Blow-up oil return function (optional)

RS485 communication function for automation management

•Isolated electrical control box to prolong the use of electrical appliances

• Pipeline using organic heat carrier furnace special pipeline

Perfect safety protection, fault display, maintenance, repair and maintenance of no need for professionals

电加热有机热载体锅炉 +25℃🔆+400℃

ITEM	UNIT		YWDR0.6- YWDR1.0-0.5/300/280 0.5/300/280PID±13P AC380V/480V 50HZ(3phase+Earth)
Temp control accuracy	℃
Power supply	1
Heat transfer medium	1	Thermal conductive oil
Rated power	KW	120	240	300	600	1000	1500
Thermal efficiency	%	98	98	98	98	98	98
Design pressure	Mpa	0.75	0.75	0.75	0.75	0.75	0.75
Motor power	KW	5.5	11.0	11.0*2	22.0*2	37.0*2	45.0*2
Pump flow	m³/h	34	50	50	100	160	200
Pump head	m	40	50	50	55	50	53
Max. power consumption	KW	127.5	251	322	622	1037	1545
Alarm function	1	Pump reversal/Oil shortage/Overheating/Overload/Abnormal heating/Pressure to protect
Connecting pipe size	inch	2"	3"	3"	4"	6"	8
Size(L×W×H)	mm	24508001900	25209002100	260010002170	280013003000	300022003500	420030003800

电加热导热油炉 +25℃🔆+400℃


ITEM	UNIT	AEOT-20	AEOT-30	AEOT-40	AEOT-50	AEOT-75	AEOT-100
Temp control accuracy	℃	PID±13P AC380V/480V 50HZ(3phase+Earth)Thermo conductive oil
Power supply	1
Heat transfer medium	1
Cooling method	1	Indirect cooling
Expansion tank	L	24	67	67	67	67	150
Heating capacity	KW	24	45	60	60	90	96
Motor power	KW	1.5	2.2	2.2	3	4	5.5
Pump flow	L/min	108	166	208	266	300	500
Pump head	m	28	31	30	31	40	45
Max. power consumption	KW	25.5	47.2	62.2	63	94	103.5
Alarm function	1		Pump reversal/Oil shortage/Overheating/Overload/Ab			normal heating
Cooling water pipe	inch	1/2"	1/2"	1/2"	1/2	1/2	1/2"
Circulating oil pipe	inch	1"	1"	1-1/4"	1-1/4	1-1/2"	2"
Size(L×W×H)	mm	12004201000	17205501250	17205501250	17205501250	17205501250	17206001400

SPECIAL TMPERATURE CONTROLUNIT FOR EXTRUSION挤出专用温控单元 +25℃🔆 + 1 2 0 ^ { \circ } C

ITEM	UNIT	AEX-05	AEX-10	AEX-20	AWMD-20-12	AWMT-20-18
Temp control range	$^ { \circ } \mathsf { C }$	Inlet water temperature +25°C-120°C
Temp control accuracy	$^ { \circ } \mathsf { C }$	PID±1
Power supply	1	AC 3N-380V/480V-50HZ
Heat transfer medium	1	Water
Cooling method	1	Direct cooling
Heating capacity	KW	3	4	9	12*2	18*3
Motor power	KW	0.37	0.75	1.5	1.5*2	1.5*3
Pump flow	$\mathsf { L } / \mathsf { m i n }$	16	22	67	167	167
Pump head	m	22	28	30	19	19
Max. power consumption	KW	4	5	11	27	59
Alarm function	1	Pump r	eversal/Water shortage/Excess t		emperature/Overl	oad
Cooling water pipe	inch	1/2	$1 / 2$	$1 / 2$	$3 / 4$	1
Circulating water pipe	inch	1/2	3/4	1	1*2	1*3
Size(L×W×H)	mm	525260530	525260530	800325640	1000700900	110010501000

BWS HIGH-GLOSS STEAMMOLD TEMPERATURE CONTROL UNITBWS高光无痕模温控制机 +25℃+180℃

Eliminate soluble wiring, melted marks, corrugated, silver marks on the product surface.

Completely solve surface shrinkage of plastic products.

Improve the surface gloss, the surface roughness is similar to mirror.

Products do not need to spray paint processing, improve the rate of finished products of 20-30%.

Solve the fiber products floating fiber problem, make the product quality perfect.

The thin-wall molding can improve the liquidity of injection, improve product quality and intensity

Thick-wall injection molding cycle can be reduced by 60%, increase the liquidity and fill effects of the plastic

Condensation,heat release,quicken the speed of heat exchanger,enhance the heating rate

Without connecting boilers and other external thermostat auxiliary equipment,omitted the complex boiler equipment (high-pressure equipment safety and Environmental approval) and Pipeline Project.

Completely solve the problem of the boiler steam non-recyclable.

Small volume can match different machines, 180 °C hot water can replace the boiler, which is not Environmental friendly.

ITEM	UNIT	BWS-600	BWS-800	BWS-1600
Power supply	V/Hz	AC 3N-380/400V-50Hz
Total power	kw	65	106	157
Total current	A	100	160	236
Control mode	1		PLC& HMI
Maximum water consumption	kg	70	125	184
Saturated steamtemperature	℃	182
Water filling pump power	kw	0.75
Cooling pump power	kw	1.5	2.2	4
Cold/ hot water circulationoutlet and inlet dimention	inch	1或3/8 (6进6出)(6outlet6inlet)	1-1/4或3/8(10进10出)(10outlet10inlet)	1-1/2或3/8(14进14出)(14outlet14inlet)
Cooling water inlet dimension	inch	1-1/4	1-1/2	2
Compressed air inlet diameter	inch	1/2	1/2	1/2
Size(L×W×H)	mm	14507001350	17509001350	19509501550

AFCH SERIES FAST HOT-COOLMOLD TEMPERATURE CONTROL UNITAFCH系列急冷急热模温控制机 +25℃+180℃

Steam mold temperature control unit provide high-temperature steam, when clamping the mold, the high temperature steam is injected into the injection, the mold temperature is increase to a set temperature value, then inject the plastic into the injection cavity. Inject cooling water or chilled water rapidly after the completion of the injection molding machine holding pressure, so that the mold can open after the mold temperature comes down to a set value within a short period of time, blow air into the mold to blow away the remnants cold water, completing a injection process cycle control, through such rapid hot and cold plastic molding can completely solve the appearance of defects of the plastic parts, improve production efficiency.

Eliminate the product surface soluble wiring and melted warks

Increase the liquidity and fill effects of the plastic

Improve the surface gloss, the surface roughness is imilar to the mirror.

Products do not need to spray paint processing, increas the finishedproducts rate by 20-30%.

Solve the fiber products floating fiber problem, make the product quality perfect

ITEM	UNIT	AFCH-1600
Power supply	V/Hz	AC 3N-380/400V-50Hz(3phase+Earth)
Total power	kw	3.06
Control mode	1	PLC&HMI
Hot-Cold conversion speed	S	15-50
Cooling water pump power	kw	3
Cooling water inlet dimension	inch	1-1/2
Steam inlet diameter	inch	1-1/2
Steam circling system diameter	inch	1-1/2
Size(L×W×H)	mm	13755501570

OIL TEMPERATURE CONTROL UNIT FOR DIE CASTING 320℃压铸专用油温机+45℃+320℃

FEATURES

The whole series use 350°C magnetic drive pump, stop oil leakage

Unique system design, solve the problem of short motor life and broken shaft

•Use boiler manufacturing standard, let the oil temperature machine no longer suffer from oil leakage trouble

Boiler standard manufacture,the heater element is no longer a wearing part

One button shutdown automatic for cooling function and oil return function

IIOT, flow rate, pressure and temperature can be monitored(option)

Thermocouple with hot sleeve type, accurate and safe without leakage

Waterproof electric control box design, safe and beautiful

ITEM	UNIT	ADDM(C)-36	ADDM(C)-48	OT320D-18	OT320D-24	OT350D-40T
Temp control range	℃	Cooling water temperature +45°℃~320°℃				+45℃~350℃
Temp control accuracy	℃	PID ±1
Power supply	1	AC 3N-380V-50HZ (3 phase+Earth)
Control mode	1	Microcomputer		PLC&HMI
Heat transfer medium	1	Thermo conductive oil
Cooling method	1	Indirect Cooling
Cooling capacity	$\mathsf { m } ^ { 2 }$	0.36+0.36	0.48+0.48	0.36+0.36	0.48+0.48	0.48+0.48
Expansion tank	L	45	62	45	62	62
Heating capacity	KW	30+30	40+40	18+18	24+24	40+40
Motor power	KW	1.1+1.1	3+3	1.1+1.1	3+3	3+3
Pump flow max	L/min	60+60	90+90	60+60	90+90	90+90
Pump head max	L/min	60+60	90+90	60+60	90+90	90+90
Max. power consumption	KW	62.2	86	38.2	54	86
Alarm function	1	Pump reversal/Oil shortage/Overheating/Overload/Abnormal heating
Cooling water pipe	inch	3/4	3/4	3/4	3/4	3/4
Circulating oil pipe	inch	3/4+3/4	1+1	3/4+3/4	1+1	1+1
Size(L×W×H)	mm	14005501500	15006501600	14005501500	15005501600	15006501600

★ Remark: Cooling water 20 l/min (30°C· 1kg/cm) media flow 50 \~100 l/min.

WATER TEMPERATURE MACHINEFOR DIE CASTING180°C/200C压铸专用水温机 + 2 5 % + 2 0 0 ^ { \circ } \mathbb { C }

FEATURES

Circulating pump: Magnetic drive, long time operation of continuous shaft/ prevent leak

High heat conduction efficiency: About 6 times heat conduction oil

Heater: Unique dry burning and scale resistant design

•IIOT: Flow rate, pressure and temperature can be monitored

Safe and reliable: Boiler standard manufacture

Energy conservation and environmental protection: Heat conduction medium is water, low cost

ITEM	UNIT	WT180D-24T	WT200D-24T
Temp control range	℃	Cooling water temperature +25C~180°C	+25℃~200℃
Temp control accuracy	℃	PID ±1
Power supply	1	AC 3N-380V-50HZ(3 phase+Earth)
Heat transfer medium	1	Water
Cooling method	1	Indirect Cooling
Cooling power	KW	350KW @180℃	400KW @200℃
Heating capacity	KW	24*2	24*2
Motor power	KW	2.5*2	2.5*2
Pump flow	L/min	90	90
Pump head	m	90	90
Max. power consumption	KW	54.5	57.4
Alarm function	1	Pump reversal/Water shortage/Overheating/Overloading/High pressure/pressure divergence/flow divergence
Circulating water pipe	inch	$1 ^ { \circ } + 1 ^ { \circ }$
Cooling water pipe	inch	$1 . 2 ^ { " } ~ + ~ 1 . 2 ^ { " }$
Size(LXW×H)	mm	$1 5 0 0 ^ { \star } 6 0 0 ^ { \star } 1 6 0 0$

DIE-CASTING SPECIAL MULTI-CHANNELHIGH TEMPERATURE WATER TCU压铸专用多通道高温水温机 +25℃+180℃

FEATURES

Single, double circuit design, each machine can simultaneously docking 10-40 mold channels

Each branch can choose intermittent water control, and the temperature control interval is effectively extended.

Optional independent display of each branch flow, tempera-

• ture, pressure and other monitoring parameters.

Effectively reduce the number of die-casting water temperature machine configuration.

•Reduce the installed power of the die-casting island and the requirements for public works.

Save space, reduce equipment investment and pipeline installation costs.

ITEM	UNIT	WT150-60T-10	WT180D-30T-10
Temp control range	℃	Cooling water temperature +25°C~150°℃	+25℃~180℃
Temp control accuracy	℃	PID ±1
Power supply	1	AC 3N-380V-50HZ(3 phase+Earth)
Heat transfer medium	1	Water
Cooling method	1	Indirect Cooling
Cooling power	KW	550KW @150℃	350KW+350KW @180°℃
Heating capacity	KW	60	30+30
Motor power	KW	4.5	4+4
Pump flow	L/min	180	200(max)
Pump head	m	100	90 (max)
Max. power consumption	KW	66	71
Number of distribution boxes	个	1	1
The number of controllable branches	路	10	5+5
Alarm function	1	Pump reversal/Water shortage/Overheating/Overloading/High pressure/pressure divergence/flow divergence
System function	/	Each channel independently controls and displays flow, pressure, temperature and other parameters
Piping of the main heat medium line	inch	1.5"x4	1.5"x4
Piping of the heat medium branch	inch	1/2"x10	1/2"x10
Cooling water pipe	inch	1.2"x2	1.2"x2
Mainframe size(L×W×H)	mm	18007001600	15006201550
Size of the distribution box(L×W×H)	mm	590490640	590490640

CHILLER SERIES制冷系列

AODE chiller series products mainly include air-cooled industrial chiller, water-cooled industrial chiller, air-cooled screw chiller, water-cooled screw chiller, water-cooled screw low-temperature chiller, evaporative cooled screw chiller, stacked ultra-low-temperature unit, which are widely used in chemical industry, pharmaceuticals, energy storage, 5G materials, 3C communications, circuit boards, semiconductors, military industry, aerospace industry, rail transportation, optical lenses, sheet/board/circuit boards, and so on. film material, dyeing and printing, rubber, injection moulding, packaging, drying, thermoforming of composite material, carbon fibre products and other industries.

FEATURES

The unit has complete protection functions, including power phase sequence, high and low pressure, motor overload, anti-freezing protection, etc

■ Adopt international well-known brand compressor, high-efficient threaded tube heat exchanger

■ Tank and water pipe material is stainless steel SUS304

■ Refrigeration valves using Danfoss, Emerson and other well-known brands

Electrical components using ABB, Siemens, Omron and other well-known brands

AIR COOLED INDUSTRIAL CHILLER风冷式工业冷水机 +7℃+25℃

ITEM		UNIT	AC-01AS	AC-03AS	AC-05AS	AC-10AS	AC-20AD	AC-30AD	AC-50AD	AC-60AF	AC-75AT	AC-100AF
kCooling Capacity		cal/h	2494	7482	11782	24768	49536	73100	114896	154800	180600	237360
kCooling Capacity		kW	2.9	8.7	13.7	28.8	57.6	85	133.6	180	210	276
Power Input		kW	1.4	3.4	5.1	9.9	20.4	30.6	49.4	59.2	68.1	90.8
Running Current		A	6.3	6.8	10.2	19.8	40.8	61.2	98.8	118.4	136.2	181.6
Refrigerant		1	R410A
Control Type		1	Digital temperature display microcomputer controller
Power Supply Type		/	1N, 220V,50Hz	3N,380V, 50Hz
Safety Protection Device		1	Overload、Inverse Phase(3 Ph)、High/Low Pressure、Low Level、Antifreeze Protection, etc
	Type	1	Hermetic Rotor Or Scroll Type
Compressor	Power	kW	0.9x1	2.7x1	4x1	8x1	8x2	12.7x2	20.5x2	12.7x4	20.5x3	20.5x4
	Type	1	MCHE Or Finned Tubes
Condenser	Air Flow	m³/h	1000	3000	5000	10000	20000	30000	50000	60000	75000	100000
	Fan Power	kW	0.11x1	0.33x1	0.55x1	1.1x1	1.1×2	1.1×2	2.2x2	1.1x4	1.1×6	1.1x8
	Type	1	Submerged Coil		Type	Dry Shell And Tube Type
Evaporator	In/Out Pipe Size	Inch	1/2	1	1	1.5	2.5	2.5	3	3	3	4
Tank Volume		L	30	70	70	120	200	200	400	400	1	1
	Flow	m³/h	0.5	1.5	2.4	5	9.9	14.9	23	31	1	1
Pump	Pressure	bar	2.7	2.5	2.7	2.7	3	3.4	3	2.9	1	1
	Power	kW	0.37	0.37	0.55	0.75	2.2	3	3.5	4	1	1
Size(L×WXH)		cm	656570	1107282	14068120	150820172	225112220		2501502452	40200220	350200240	460200240
Net Weight		kg	90	150	170	370	590	880	1280	1420	1780	2360
Refrigerant Charge		kg	0.5	1.5	2.5	5	10	15	25	30	38	50

WATER COOLED INDUSTRIAL CHILLER水冷式工业冷水机 +7℃+25℃

ITEM		UNIT	AC-10WS	AC-20WD	AC-30WD	AC-50WD	AC-60WF	AC-75WT	AC-100WF	AC-150WG
Cooling Capacity		kcal/h	27950	55900	82560	128312	165120	206400	280360	412800
Cooling Capacity		kW	32.5	65	96	149.2	192	240	326	480
PowerInput		kW	7.5	15.2	24.4	37.4	46.8	50.1	66.8	100.2
Refrigerant		1	R410A
Control Type		1	Digital temperature display microcomputer controller
Power supply		1	3N, 380V, 50Hz
Safety Protection Device		1	Overload、Inverse Phase、High/Low Pressure、Low Level、Antifreeze Protection,etc
Compressor	Type	1	Hermetic Rotor Or Scroll Type
Compressor	Power	kW	6.5	6.5x2	10.7×2	16.7×2	10.7x4	16.7x3	16.7x4	16.7x6
	Type	1		Shell And T	ube Type
Condenser	Water Flow	m³/h	7	14	21	32	41	51	68	102
	In/Out Pipe Size	Inch	1.5	2	2.5	3	3	4	4	5
Evaporator	Type	1			Dry Shell And Tube Type
Evaporator	In/Out Pipe Size	Inch	1.5	2.5	2.5	3	3	4	4	5
Tank Volume		L	120	200	200	400	400	1	1	1
	Flow	m³/h	5.6	11.2	16.8	25.7	32.7	1	1	1
Pump

			Pressure	bar	2.7	3	3.4	3	2.9	1	1	1
	Power	kW	0.75	2.2	2.2	3	4	1	1	1
Size(L×W×H)		cm	14063145	18087167	230112167	270132180		22080220	25080238	230160220
Net Weight		kg	300	440	690	1000	1100	1350	1820	2300
Refrigerant Charge		kg	5.6	11.2	16.8	27.2	34	43	56	84

AIR COOLED SCREW CHILLER风冷螺杆冷水机 +7℃+25℃

ITEM		UNIT	ACS-230AS	ACS-260AS	ACS-310AS	ACS-340AS	ACS-370AS	ACS-410AS
Cooling Capacity		kcal/h	148436	159444	198918	221450	238478	259204
Cooling Capacity		kW	172.6	185.4	231.3	257.5	277.3	301.4
Total Power Input		kW	83.4	90.2	106.9	115.7	129.3	141.3
Running Current		A	167	180	214	231	259	283
Refrigerant		1	R404A/R507
Steps Control		%	0/25/50/75/100
Control Type		1	Automatic Control, Color LCD Touch Screen
Power Supply Type		1	3N, 380V, 50Hz
Safety Protection Device		1	Overload、Inverse Phase、High/Low Pressure、Safety Valve、Water Flow、Oil Level、Exhaust Temperature、 Antifreeze Protection, etc
	Type	1	Semi-hermetic Screw
Compressor	Start Type	1	Y-∆
	Amount	Sets	1
Condenser	Type	1	MCHE Or Finned Tubes
	Air Flow	m³/h	70000	80000	90000	100000	110000	120000
	Total Fan Power	kW	8.8	8.8	8.8	8.8	13.2	13.2
	Amount	Sets	4	4	4	4	6	6
Evaporator	Type	1			Shell And Tu	be Type
	Water Flow	m³/h	30	32	40	44	48	52
	Water Pressure Drop	kPa	80	80	80	85	85	85
	In/Out Pipe Size	DN	80	80	80	80	100	100
Size (L×W×H)		cm		260*220	*263		400220	263
Net Weight		kg	1620	1750	2180	2430	2620	2840
Refrigerant Charge		kg	40	43	53	59	64	70

WATER COOLED SCREW CHILLER水冷螺杆冷水机 +7℃+25℃

ITEM		UNIT	ACS-410WS	ACS-470WS	ACS-510WS	ACS-580WS	ACS-710WS	ACS-940WD	ACS-1160WD	ACS-1420WD
Cooling Capacity		kcal/h	369972	449952	470764	563730	681808	899904	1127460	1363616
Cooling Capacity		kW	430.2	523.2	547.4	655.5	792.8	1046	1311	1586
Power Input		kW	103	123.3	126	151.7	181.1	247	303	362
Running Current		A	206	247	252	303	362	493	607	724
Refrigerant		1	R507
Steps Control		%	0/25/50/75/100
Temperature Control Range		℃	+7~+25
Control Type		1	Automatic Control, Color LCD Touch Screen
Power Supply Type		1	3N,380V, 50Hz
Safety Protection Device		1	Overload、Inverse Phase、High/Low Pressure、Safety Valve、Water Flow、Oil Level、Exhaust Temperature、Antifreeze Protection, etc
Compressor	Type	1	Semi-hermetic Screw
Compressor	ssor	Start Type	1	Y-∆
	Amount	Sets	1					2
Condenser	Type	1	Shell And Tube Type
	Water Flow	m³/h	92	112	118	141	170	225	282	341
	Water Pressure Drop	kPa	65	65	70	70	75	95	95	95
	In/Out Pipe Size	DN	125	125	125	150	150	200	200	200
Evaporator	Type	1				Shell And Tube		Type
	Water Flow	m³/h	74	90	94	113	136	180	225	273
	Water Pressure Drop	kPa	60	60	65	65	70	90	90	90
	In/Out Pipe Size	DN	125	125	125	150	150	200	200	200
Size(L×W×H)		cm	32891189	33099195	33099201	356108210	358113225	353144221	371146229	395153242
Net Weight		kg	2080	2320	2490	2770	3310	3990	4760	5670
Refrigerant Charge		kg	70	84	89	105	127	158	197	239

WATER COOLED LOWTEMPERATURE SCREW CHILLER水冷螺杆低温冷水机 \mathtt { 1 0 ^ { \circ } C } \ B0 ^ { \circ } \mathbb { C }

ITEM		UNIT	ACSL-410WS	ACSL-470WS	ACSL-510WS	ACSL-580WS	ACSL-710WS	ACSL-940WD	ACSL-1160WD	ACSL-1420WD
Cooling Capacity(-10°C)		kcal/h	190060	230480	241660	289820	350020	460960	579640	700040
Cooling Capacity(-10°C)		kW	221	268	281	337	407	536	674	814
Power Input(-10°C)		kW	103	123	126	151	180	246	302	360
Running Current(-10°C)		A	206	246	252	302	360	492	604	720
Cooling Capacity(-20°℃)		kcal/h	124700	151360	158240	190060	229620	302720	380120	459240
Cooling Capacity(-20°℃)		kW	145	176	184	221	267	352	442	534
Power Input(-20°C)		kW	98	117	120	144	172	234	288	344
Cooling Capacity(-30°℃)		kcal/h	78260	94600	99760	119540	144480	189200	239080	288960
Cooling Capacity(-30°℃)		kW	91	110	116	139	168	220	278	336
Power Input(-30°C)		kW	88	105	110	131	156	210	262	312
Refrigerant		1	R404A/R507
Steps Control		%	0/25/50/75/100
Control Type		1	Automatic Control, Color LCD Touch Screen
Power Supply Type		1	3N 380V, 50Hz
Safety Protection Device		1	Overload、Inverse Phase、High/Low Pressure、Safety Valve、Water Flow、Oil Level、Exhaust Temperature、Antifreeze Protection, etcB
	Type	1	Semi-hermetic Screw
Compressor	Start Type	/	Y-∆
	Amount	Sets	1					2
	Type	/	Shell And Tube T					ype
Condenser	Water Flow	m³/h	80	97	101	122	147	194	243	294
Condenser	Water Pressure Drop	kPa	65	65	70	70	75	95	95	95
	In/Out Pipe Size	DN	125	125	125	150	150	200	200	200
Evaporator	Type	1				Sh	ell And Tube T	ype
	Water Flow	m³/h	64	77	81	97	118	155	195	235
		Water Pressure Drop	kPa	60	60	65	65	70	90	90	90
	In/Out Pipe Size	DN	125	125	125	150	150	200	200	200
Size (L×W×H)		cm	32891189	33099195	33099201	356108210	358113225	353144221	371146229	395153242
Net Weight		kg	2080	2320	2490	2770	3310	3990	4760	5670
Refrigerant Charge		kg	70	84	89	105	127	158	197	239

EVAPORATIVE LOW TEMPERATURE SCREW CHILLER 蒸发冷螺杆低温冷水机-10℃-30℃

ITEM		UNIT	ACSL-410ES	ACSL-470ES	ACSL-510ES	ACSL-580ES	ACSL-710ES	ACSL-940ED	ACSL-1160ED	ACSL-1420ED
Cooling Capacity(-10°C)		kcal/h	198660	241660	252840	302720	366360	483320	605440	732720
Cooling Capacity(-10°C)		kW	231	281	294	352	426	562	704	852
Power Input(-10°C)		kW	94	112	114	138	164	224	276	328
Running Current(-10°C)		A	188	224	228	276	328	448	552	656
Cooling Capacity(-20°C)		kcal/h	131580	159960	167700	200380	243380	319920	400760	486760
Cooling Capacity(-20°C)		kW	153	186	195	233	283	372	466	566
Power Input(-20°C)		kW	89	106	109	131	156	212	262	312
Cooling Capacity(-30°C)		kcal/h	80840	98900	103200	123840	149640	197800	247680	299280
Cooling Capacity(-30°C)		kW	94	115	120	144	174	230	288	348
Power Input(-30°C)		kW	81	98	100	121	145	196	242	290
Refrigerant		1				R404A	/R507
Steps Control		%	0/25/50/75/100
Control Type		1	Automatic Control, Color LCD Touch Screen
Power Supply Type		7	3N, 380V, 50Hz
Safety Protection Device		/	Overload、Inverse Phase、High/Low Pressure、Safety Valve、Water Flow、Oil Level、Exhaust Temperature、Antifreeze Protection, etc
	Type	1	Semi-hermetic ScrewY-∆
CompressorStart	Type	一	Semi-hermetic ScrewY-∆
	Amount	Sets	1					2
WaterEvaporatorW	Type	1				She	ll And Tube Typ	e
	Flow	m³/h	67	81	85	102	123	162	203	246
	ater Pressure Drop	kPa	60	60	65	65	70	90	90	90
	In/Out Pipe Size	DN	125	125	125	150	150	200	200	200
Pump	Type	/				Evaporation	Type (Separate	Supply)
Pump	Power	kW	2.2	2.2	2.2	2.2	2.2	3.0	4.0	5.5
Condenser Water	Flow	m³/h	80	80	80	80	80	130	170	230
FanAir	Power	kW	5.5	5.5	7.5	7.5	7.5	11	11	16.5
FanAir	Flow	m³/h	80000	80000	110000	110000	110000	156000	174000	234000
Compressor Un	it Size	cm	32891189	33099195	33099201	356108210	358113225	353144221	371146229	395153242
Compressor Unit Weight		kg	1660	1860	1900	2200	2600	3200	3800	4500
ondenser Size(L×W×H)		cm	229321492	229321492	229321492	229321492	229321492	413301494	425301494	567261494
Condenser Weight		kg	6200	6200	6220	6220	6220	11250	13390	14000
Refrigerant Charge		kg	140	170	180	210	250	320	400	480

CASCADE REFRIGERATING UNIT复叠式超低温机组 -70℃-100℃

ITEM		UNIT	ACL-50KW-70	ACL-90KW-70	ACL-40KW-100
Cooling Capacity		kcal/h	43000	72928	34400
Cooling Capacity		kW	50	90	40
Outlet Temperature		℃	-70	-70	-100
Power Input		kW	100	140	180
Max. PowerInput		kW	150	210	270
Refrigerant		1	R404A/R23		R404A/R23/R14
Control Type		1	Automatic Control, Color LCD Touch Screen
Power Supply Type		1	3N, 380V, 50Hz
Safety Protection Device		1	Overload、Inverse Phase、High/Low Pressure、Safety Valve、Water Flow、Exhaust Temperature、Antifreeze Protection, etc
Compressor	Type	1	Semi-hermetic
Condenser	Type	1	Shell And Tube Type
	Water Flow	m³/h	65	88	88
	Water Pressure Drop	kPa	80	95	95
	In/Out Pipe Size	DN	80	100	100
Evaporator	Type	1		Plate Type
	Liquid Flow	m³/h	22	40	18
	Pressure Drop	kPa	50	80	80
	In/Out Pipe Size	DN	50	65	50
Size(L×W×H)		cm	380220260	450220260	550220260
Net Weight		kg	5200	5900	6800

WATER-COOLED AIR SUSPENSION CENTRIFUGAL CHILLER 水冷气悬浮离心式冷水机 +7℃ + 2 5 %

ITEM		UNIT	ACC-200RTW	ACC-250RTW	ACC-300RTWA	CC-350RTW	ACC-400RTWA	CC-500RTW	ACC-600RTW	ACC-700RTW
kCooling Capacity		cal/h	653720.4	770078.4	925446	1063734	1307440.8	1540156.8	1850892	2127468
kCooling Capacity		kW	760.14	895.44	1076	1237	1520.28	1790.88	2173.3	2473.8
PowerInput		kW	122.6	144.4	174.8	199.5	245.1	288.8	349.6	399.0
COP		W/W	6.2	6.2	6.2	6.2	6.2	6.2	6.2	6.2
Running Current		A	245	289	350	399	490.2	577.6	699.2	798
Refrigerant		1	R134a
Steps Control		%	30~100
Control Type		1	Automatic Control, Color LCD Touch Screen
Power Supply Type		1	3N,380V,50Hz
Safety Protection Device		1	Overload、Inverse Phase、High/Low Pressure、Safety Valve、Water Flow、Exhaust Temperature、Antifreeze Protection、Surge Protection, etc
	Type	1	Air Suspension Centrifugal
Compressor S	tart Type	1	VFD startup
Compressor S	Amount	Sets	1				2
Condenser	Type	1	Shell And Tube Type
	Water Flow	m³/h	152	179	215	247	304	358	434	494
	Water Pressure Drop	kPa	40	45	50	55	60	70	80	90
	In/Out Pipe Size	DN	125	150	200	200	200	200	250	250
Evaporator	Type	1				Shell And Tube Type
	Water Flow	m³/h	131	154	185	213	261	308	374	425
	Water Pressure Drop	kPa	38	40	45	52	55	68	78	85
	In/Out Pipe Size	DN	125	150	200	200	200	200	250	250
Size(L×W×H)		cm	360160220	360160230	380160230	380160240	392224240	392232245	392232245	398252250
Net weight		kg	3900	4500	5500	6500	7500	8500	9500	10500
Refrigerant Charge		kg	200	230	280	330	400	460	560	660

JET COOLER高压点冷机 +10℃ + 3 0 %

PURPOSE

Controlled solidification + shrinkage

• Control cooling time

Reduce spraying time

Reduce product shrinkage

Prevent core pin burning

Improve production efficiency

FEATURES

High-pressure jet cooling

Single point/channel control

blocking alarm

High efficiency cooling/single machine circulation

To cool the jetting tube with inner diameter ≤φ2.5

ITEM		UNIT	JC (Single point control)					FC (Single circulation control)
ITEM		UNIT	JC12F	JC24F	JC36F	JC48F	JC120F	FC4-24F	FC6-36F	FC8-48F	FC12-120F
Power supply		1	(AC 3P+N+PE) -380V-50HZ(3 phase+Zero line+Earth)Pure water (or softened water)
Heat transfer medium		1
Controllable loop		个	12	24	36	48	120	4	6	8	12
Power		KW	3	3	5.5	5.5	15	3	5.5	5.5	15
Total system flow		L/Min	67	67	133	133	333	67	133	133	333
Max system Pressure		MPa	1.5(adjust)					1.5(adjust)
Control mode		/	Single point control					Single-channel control(each channel is connected to multiple support point coolers)
Number of distribution boxes		Pcs	1	2	2	2	6	2	2	2	2
Point the cold branch piping		L/Min	φ6x12	Φ6x24	φ6x36	Φ6x48	φ6x120	1/2"x4	1/2"x6	1/2"x8	1/2"x12
Size	Length	mm	1330	1330	1350	1350	1550	1330	1350	1350	1550
	Width	mm	650	650	700	700	1100	650	700	700	1100
	Height	mm	1585	1585	1775	1775	1975	1585	1775	1775	1975

HIGH PRESSURE DIE COOLER高压模冷机 +10℃+30℃

PURPOSE

•Mold cooling, Improve the qualified rate of products

• Improved cooling efficiency, Reduced cooling time

Ensure continuous production

• Prolong service life

FEATURES

• No negative pressure ,constant pressure water supply system

• Zone cooling control

• Inner pipe diameter ≥ φ 3MM point cooling tube and cooling water channel cooling

ITEM	UNIT	MC12F	MC16F	MC20F	MC24F
Power supply	1	(AC 3P+N+PE) -380V-50HZ(3 phase+Zero line+Earth)
Heat transfer medium	1	Pure water (or softened water)
Controlled temperature zones	Pcs	12	16	20	24
Flow rate	m3/h	12	16	20	24
Max System pressure	MPa		0.8(adjust)
Total Power	KW	3	5.5	7.5	7.5
Control Mode	1	Single circulation control
Number of distribution boxes	Pcs	2
Mold cooling branch piping	Inch	1/2"x12	1/2"x16	1/2"x20	1/2"x24
Size(L×W×H)	mm	1450x680x1748	1450x680x1748	1640x780x1748	1640x780x1748

MOULD COOLING STATION模具冷却站 +10℃+30℃

PURPOSE

Achieve accurate temperature control and mold heat balance by supplying cooling water to different zone of the mold.

Improved cooling efficiency

Reduced cooling time

•One machine to solve the whole mold cooling control

• Prolong die life

FEATURES

• No negative pressure , constant pressure water supply system

Mold zone cooling control

• Single cycle

Constant temperature control of water supply

High pressure (point cooling), medium pressure (mold cooling) water supply system independent control

ITEM	UNIT	MCS-J12-M12	MCS-J24-M16	MCS-J36-M20	MCS-J48-M24
Power supply	1	(AC 3P+N+PE) -380V-50HZ (3 phase+Zero line+Earth)
Heat transfer medium	1	Pure water (or softened water)
Controllable Emperature	Pcs	12	24	36	48
Total water supply	L/Min	67	67	133	133
Max system Pressure	MPa	1-1.5(adjust)		1-1.5(adjust)
Controllable mold cold circuit	Pcs	12	16	20	24
Total water supply	L/Min	133	200	267	333
Max system Pressure	MPa	0.6-0.8(adjust)		0.6-0.8(adjust)
Maximum input power	KW	24		44
Water Tank Capacity	L	680		1500
The number of cooling distribution boxes	Pcs	1	2	2
Point the cold branch piping	inch	Φ6x12	Φ6x24	Φ6x36	Φ6x48
The number of mold cooling distribution boxes	Pcs	1	2	2
Mold cooling branch piping	inch	1/2"x12	1/2"x16	1/2"x20	1/2"x24
Size(L×W×H)	mm	1718x1080x1678		2148x1150x1985

HEATING AND COOLINGUNIT SERIES冷热一体系列

TESTING INDUSTRY ACT SERIES

Intelligent temperature control equipment for high and low temperature liquids adopts the compressor of international first-class brand, which can realise intelligent temperature, flow and pressure adjustment and monitoring, and is mainly used in the new energy automobile industry, for example, the high and low temperature performance testing of the motor, the battery pack, the controller, the heat exchanger, the pumps, the valves, the pipelines and other components.

MAIN FEATURES

Unit operation stability The temperature control precision is high, and the rate of temperature rise and fall is fast; the temperature control precision is ±1°C;

Is equipped with frequency conversion pump, supporting output flow and pressure adjustment in a wide range, and the flow precision is ±0.2L/min;

Has remote communication function, supporting Rs485 and CAN communication;

Has complete safety protection function; Containing power supply phase sequence, high and low voltage, motor overload, low liquid level, over-temperature, anti-freezing protection, etc.;

Unit with casters, mobile and flexible; easy to install and operate and maintain.

【ACT SERIES】 INTELLIGENT HIGH ANDLOW LIQUID TEMPERATURE CONTROL DEVICE高低温液体智能温控设备 +5℃+100℃

ITEM	UNIT	ACT03WS09KW-40S-10	ACT05WS09KW-40S-10	ACT10WS12KW-40S-10	ACT15WS24KW-40S-10	ACT10WS24KW-40S-10
cooling capacity (+20°C)	kW	8.9	15.8	33.1	49.3	32.2
cooling capacity (+10°C)	kW	7	12.5	26.8	39.2	25.9
Calorific value	kW	9	9	12	24	24
Power Input	kW	12.8	14.6	22.8	40.2	35.7
Running Current	A	25.6	29.2	45.6	80.3	71.4
Power supply	1	3PH~380V ~50Hz
Circulation medium	1	Automotive antifreeze that meets concentration requirements
Channel number	1	1	1	1	1	2
Temp control range	℃	+5～+100
Flow range (+20°C)	L/m	2~40	2~40	2~40	2~40	2~40
Tank volume	L	≥50	≥50	≥80	≥120	≥120
Operating method	1	Colour LCD touch screen
Communication method	1	Rs485, Modbus RTU
Refrigeration inlet and outletpipe diameter	Inch	1.2"	1.2"	1.2"	1.2"	2 ×1.2"
Cooling inlet and outlet pipediameter	Inch	1"	1.5"	2"	2.5"	2"
Size (LWH)	cm	14070160	14080202	14080202	180100202	200120202

【ACT SERIES】 INTELLIGENT HIGH ANDLOW LIQUID TEMPERATURE CONTROL DEVICE高低温液体智能温控设备 -35℃+100℃

ITEM	UNIT	ACT03WS09KW-20S-35	ACT05WS09KW-20S-35	ACT10WS12KW-40S-35	ACT15WS24KW-80D-35	ACT20WS24KW-80D-35	ACT25WS24KW-80D-35
Cooling capacity(+20°C)	kW	8.7	13.6	26.1	38.9	45.5	61.2
Cooling capacity(-20°C)	kW	2.6	4.3	8.8	12.9	15.8	22.1
Cooling capacity(-35°C)	kW	0.1	0.4	1.5	1.9	3	5.4
Calorific value	kW	9	9	12	24	24	24
Power Input	kW	16.35	18.3	26.5	49	52	60
Power supply	1	3PH~380V~50Hz
Circulation medium	1	Automotive antifreeze that meets the concentration requirements(60% to 70% by volume of ethylene glycol)
Channel number	1	1	1	1	2	2	2
Temp control range	℃	-35～+100
Flow range(+20°℃)	L/m	1~20	1~20	2~40	2~40	2~40	2~40
Flow range(-35°C)	L/m	1~5	1~5	2~10	2~10	2~10	2~10
Tank volume	L	≥50	≥50	≥80	≥120	≥120	≥120
Operating method	1	Colour LCD touch screen
Communication method	1	Rs485, Modbus RTU (Optional CAN, Ethernet)
Refrigeration inlet andoutlet pipe diameter	Inch	3/4"	3/4"	1.2"	2×1.2"	2×1.2"	2×1.2"
Cooling inlet and outletpipe diameter	Inch	1"	1.5"	2"	2.5"	2.5"	2.5"
Size(LWH)	cm	14070160	14080202	14080202	200120202	200120202	200120202

【ACT SERIES】 INTELLIGENT HIGH ANDLOW LIQUID TEMPERATURE CONTROL DEVICE高低温液体智能温控设备 -40℃+100℃

ITEM	UNIT	ACT05WS09KW-20S-40	ACT10WS12KW-40S-40	ACT15WS24KW-40S-40	ACT15WS24KW-80D-40	ACT20WS24KW-80D-40	ACT25WS24KW-80D-40
Cooling capacity(+20°C)	kW	8.5	13.7	18.6	16.3	18.5	26.9
Cooling capacity(-20°C)	kW	7.3	11.8	16.1	13.8	15.8	23.3
Cooling capacity(-40°C)	kW	1.6	3	4.6	2.3	4.1	5.9
Calorific value	kW	9	12	24	24	24	24
Power Input	kW	19.5	28.5	44.7	47	50.9	55.8
Running Current	A	39	57	89.4	94	101.8	111.6
Power supply	1	3PH~380V〜50Hz
Circulation medium	1	Automotive antifreeze that meets the concentration requirements(60% to 70% by volume of ethylene glycol)
Channel number	1	1	1	1	2	2	2
Temp control range	$^ { \circ } \mathsf { C }$		-40～+100
Flow range(+20°℃)	$L / m$	1~20	2~40	2~40	2~40	2~40	2~40
Flow range(-40°℃)	$L / m$	1~5	2~10	2~10	2~10	2~10	2~10
Tank volume	L	≥50	≥80	≥120	≥120	≥120	≥120
Operating method	1	Colour LCD touch screen
Communication method	1	Rs485, Modbus RTU (Optional CAN, Ethernet)
Refrigeration inlet andoutlet pipe diameter	Inch	$3 / 4 "$	$1 . 2 "$	$1 . 2 "$	2×1.2"	2×1.2"	2×1.2"
Cooling inlet and outletpipe diameter	Inch	1"	$1 . 5 "$	$1 . 5 "$	$1 . 5 "$	2"	2"
Size (LWH)	cm	14080202	14080202	180100202	200120202	200120202	200120202

【ACT SERIES】 ENERGY STORAGE LIQUIDCOOLING TEMPERATURE CONTROL ÉQUIPMENT储能液冷温控设备 + 5 % +25℃

ITEM	UNIT	ACT03AS	ACT05AS	ACT10AS	ACT15AS	ACT20AD	ACT25AD
Cooling capacity(+20°C)	kW	10.4	16.4	34.6	51	69.1	80.2
Cooling capacity(+10°C)	kW	8.7	13.7	28.8	42.5	57.6	66.8
Calorific value	kW	6	9	12	12	12	12
Power Input	kW	9.8	14.7	22.6	29.1	34.6	37.8
Running Current	A		28.2	43	53.8	64.8	71.2
Power supply	1	3PH~380V~50Hz
Circulation medium	1	Antifreeze that meets concentration requirements
Temp control range	$^ { \circ } { \mathsf C }$	+5～+25
Rated flow rate(+20°C)	$L / m$		47	99	146	198	230
Tank volume	L		≥70	≥120	≥120	≥200	≥200
Cooling air volume	$\mathsf { m } ^ { 3 } / \mathsf { h }$		5000	10000	15000	20000	25000
Operating method	1	Colour LCD touch screen
Communication method	1	Rs485 ,Modbus RTU
Refrigeration inlet andoutlet pipe diameter	Inch	1	1	1.5	2	2.5	2.5
Size (LWH)	cm	14070160	140100180	15095170	20092160	225112220	225112220

HEATING AND COOLINGUNIT SERIES冷热一体系列

SEMICONDUCTOR INDUSTRY ACSM SERIES

Main applications: semiconductor materials (including silicon wafers, photoresists, cmp polishing materials, wet electronics chemicals, precursors for wafer body encapsulation materials, M0 sources, etc.), semiconductor equipment (including cleaners, oxidation ovens, lithography, PVD/PECVD, probe tables, inspection equipment, sorting machines, data centre liquid-cooled CDU distribution units, etc.).

MAIN FEATURES

Intelligent PID algorithm, support for segmented temperature control, automatic algorithms, fuzzy control and other functions, high accuracy of temperature control

Refrigerant system using hot gas bypass temperature control, dynamic adjustment of the system load, energy saving and high efficiency

■ The product series covers multiple temperature zones, can match the semiconductor industry with different processes

■ Special optimisation of the structure, low vibration, low noise

With Automatic purge function

■ Optimised for coolant piping process, low risk of leakage.

【ACSM SERIES】 AIR CHILLER精密冷水机 +5℃+40℃

ITEM	UNIT	ACSM02AS-5	ACSM03AS-5	ACSM05AS-5	ACSM10AS-5
cooling capacity(10°C)	kW	5.4	8.7	13.7	30.2
CompressorPower	kW	1.6	2.3	3.1	6.3
Circulation pump power	kW	0.4	0.4	0.6	0.8
Fan power	kW	0.3	0.5	1.2	2.4
Total Input Power	kW	2.3	3.2	4.9	9.5
Running Current	A	5.0	6.8	11.9	21.3
Power supply	1	3PH～380V~50Hz (Customisable 220V)
Circulation medium	1	Deionised water, fluoride solution, etc.
Temp control accuracy	℃	± 0.1
Rated flow rate	L/min	25	25	40	80
Condenser type	1		High-efficiency air-cooled condenser
Fuel tank volume	L	≥2	≥3	≥5	≥10
Refrigeration inlet andoutlet pipe diameter	Inch	1.0"	1.0"	1.2"	1.5"
Refrigerant	1		R410A
Weight	kg	100.0	130.0	150.0	300.0
Operating noise @ 1m	dB(A)		≤ 70
Size (LWH)	cm	4060100	40100110	60100120	60100150

【ACSM SERIES】 WATER CHILLER

ITEM	UNIT	ACSM02WS-5	ACSM03WS-5	ACSM05WS-5	ACSM10WS-5
Cooling Capacity	kW	5.9	9.6	14.8	31.4
CompressorPower	kW	1.6	2.3	3.1	6.3
Circulation pump power	kW	0.4	0.4	0.6	0.8
Total Input Power	kW	2.0	2.7	3.7	7.1
Running Current	A	4.5	6.0	8.9	17.4
Power supply	1	3PH~380V~50Hz(Customisable 220V)
Circulation medium	1	Deionised water, fluoride solution, etc.
Temp control accuracy	℃	±0.1
Rated flow rate	L/min	25	25	40	80
Pressure range	Bar	0.5～3.0	0.5～3.0	0.5～3.0	0.5~3.0
Condenser type	1		High-efficiency water-cooled condenser
Fuel tank volume	L	≥2	≥3	≥5	≥10
Cooling water flow	$\mathsf { m } ^ { 3 } / \mathsf { h }$	1.8	2.5	4.2	9.9
Refrigeration inlet andoutlet pipe diameter	Inch	1.0"	1.0"	1.2"	1.5"
Cooling inlet and outletpipe diameter	Inch	1.0"			1.5"
Refrigerant	1	R410A
Weight	kg	100.0	130.0	150.0	300.0
Operating noise @ 1m	dB(A)		≤65
Size (LWH)	cm	4060100	40100110	60100120	60100150

【ACSM SERIES】 AIR CHILLER高低温一体智能温控机 -20℃+100℃

ITEM	UNIT	ACSM02A06KW-20	ACSM03A09KW-20	ACSM05A12KW-20
Cooling Capacity(+20°C~+100°C)	kW	4.9	7.6	12.7
Cooling Capacity(-5°C)	kW	2.4	3.9	6.4
Cooling Capacity(-20C)	kW	0.7	1.6	2.6
Calorific value	kW	3.0	3.0	6.0
CompressorPower	kW	2.3	2.9	4.7
Circulation pump power	kW	0.8	0.8	1.5
Fan power	kW	0.3	0.5	1.2
Total Input Power	kW	6.4	7.2	13.4
Power supply	1	3PH~380V~50Hz (Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control accuracy	℃	± 0.5
Rated flow rate	L/min	38	56	95
Pressure range	kPa	25～150	25～150	25～180
Condenser type	1	High	-efficiency air-cooled condenser
Fuel tank volume	L	≥10	≥10	≥10
Refrigeration inlet andoutlet pipe diameter	Inch	1.2"	1.2"	1.2"
Refrigerant	1		R404A
Weight	kg	300	350	420
Operating noise @1m	dB(A)		≤ 70
Size(LWH)	cm	5060150	6070150	7080180

【ACSM SERIES】 AIR CHILLER高低温一体智能温控机 -35℃+100℃

ITEM	UNIT	ACSM02A06KW-35	ACSM03A09KW-35	ACSM05A12KW-35
Cooling Capacity (+20°℃~+100°C)	kW	5.4	7.5	13.6
Cooling Capacity (-5°℃)	kW	2.5	3.6	6.5
Cooling Capacity (-20°C)	kW	1.0	1.6	2.8
Cooling Capacity (-35°C)	kW	0.1	0.4	0.6
Calorific value	kW	3.0	3.0	6.0
CompressorPower	kW	2.6	2.9	5.0
Circulation pump power	kW	0.8	0.8	1.5
Fan power	kW	0.3	0.5	1.2
Power Input	kW	6.7	7.2	13.7
Running Current	A	14.6	15.8	30.1
Power supply	1	3PH~380V~50Hz(Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control accuracy	℃	± 0.5
Rated flow rate	L/min	41	55	101
Pressure range	kPa	25～150	25～150	25～180
Condenser type	1	High	-efficiency air-cooled condenser
Fuel tank volume	L	≥10	≥10	≥10
Refrigeration inlet andoutlet pipe diameter	Inch	1.2"	1.2"	1.2"
Refrigerant	1		R404A
Weight	kg	300	350	420
Operating noise @1m	dB(A)		≤70
Size (LWH)	cm	5060150	6070150	7080180

【ACSM SERIES】 AIR CHILLER高低温一体智能温控机-60℃+100℃

ITEM	UNIT	ACSM04A06KW-60	ACSM06A09KW-60	ACSM08A12KW-60
Cooling Capacity (+20°℃~+100°C)	kW	4.8	5.4	10.0
Cooling Capacity (-20°C)	kW	2.5	2.7	5.0
Cooling Capacity (-40°C)	kW	1.4	1.4	2.5
Cooling Capacity (-60°C)	kW	0.5	0.7	1.6
Calorific value	kW	6.0	6.0	6.0
CompressorPower	kW	4.5	5.4	10.1
Circulation pump power	kW	0.4	0.8	1.5
Fan power	kW	1.0	1.2	2.5
Power Input	kW	11.9	13.4	20.1
Running Current	A	26.1	29.4	44.1
Power supply	1	3PH~380V~50Hz(Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control accuracy	℃	± 0.5
Rated flow rate	L/min	33	39	73
Pressure range	kPa	25~150	25～150	25~180
Condenser type	1	Hig	h-efficiency air-cooled condens	er
Fuel tank volume	L	≥10	≥10	≥10
Refrigeration inlet andoutlet pipe diameter	Inch	3/4	1.2"	1.2
Refrigerant	1		R404A、R23
Weight	kg	350	420	420
Operating noise @1m	dB(A)		≤70
Size (LWH)	cm	6070150	7080180	7080180

【ACSM SERIES】 AIR CHILLER高低温一体智能温控机 \mathfrak { s o c } 樂 + 1 0 0 ^ { \circ } \mathbb { C }

ITEM	UNIT	ACSM08A06KW-90	ACSM10A09KW-90	ACSM15A12KW-90
Cooling Capacity(+20℃~+100°C)	kW	6.0	7.9	9.4
Cooling Capacity(-20°C)	kW	3.5	4.0	4.9
Cooling Capacity(-40°C)	kW	1.8	2.1	2.6
Cooling Capacity(-70°C)	kW	1.1	1.3	1.7
Cooling Capacity(-90°C)	kW	0.5	0.7	1.0
Calorific value	kW	6.0	6.0	6.0
CompressorPower	kW	10.1	11.2	13.1
Circulation pump power	kW	1.5	1.5	1.5
Fan power	kW	2.5	2.8	3.2
Power Input	kW	20.1	21.5	23.8
Running Current	A	42.1	45.2	49.9
Power supply	1	3PH~380V~50Hz(Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control accuracy	℃		± 0.5
Rated flow rate	L/min	35	40	50
Pressure range	kPa	25～180	25～300	25～300
Condenser type	1	Hig	h-efficiency air-cooled condenser
Fuel tank volume	L	≥10	≥20	≥20
Refrigeration inlet andoutlet pipe diameter	Inch	1.2"	1.2"	1.2"
Refrigerant	1		R404A、R23、R14
Weight	kg	420	500	850
Operating noise @1m	dB(A)		≤70
Size (LWH)	cm	7080180	80120200	100120200

【ACSM SERIES】 WATER CHILLER高低温一体智能温控机 -20℃+100℃

ITEM	UNIT	ACSM02W06KW-20	ACSM03W09KW-20	ACSM05W12KW-20
Cooling Capacity (+20 C ~+100 °℃)	kW	4.9	7.6	12.7
Cooling Capacity (-5°C)	kW	2.4	3.9	6.4
Cooling Capacity (-20°C)	kW	0.7	1.6	2.6
Calorific value	kW	3.0	3.0	6.0
CompressorPower	kW	2.3	2.9	4.7
Circulation pump power	kW	0.8	0.8	1.5
Power Input	kW	6.1	6.7	12.2
Running Current	A	13.8	16.7	28.5
Power supply	1	3PH~380V~50Hz(Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control accuracy	℃	± 0.5
Rated flow rate	L/min	38	56	95
Pressure range	kPa	25～150	25～150	25～180
Condenser type	1	High-	efficiency water-cooled con	denser
Fuel tank volume	L	≥10	≥10	≥10
Cooling water flow	m³/h	1.8	2.5	4.2
Refrigeration inlet and outlet pipe diameter	Inch	1.2"	1.2"	1.2"
Cooling inlet and outlet pipe diameter	Inch	1.0"	1.0"	1.5"
Refrigerant	1		R404A
Weight	kg	300	350	420
Operating noise @1m	dB(A)		≤65
Size (LWH)	cm	5060150	6070150	7080180

【ACSM SERIES】 WATER CHILLER高低温一体智能温控机 -35℃+100℃

ITEM	UNIT	ACSM02W06KW-35	ACSM03W09KW-35	ACSM05W12KW-35
Cooling Capacity (+20 C ~+100°℃)	kW	5.4	7.5	13.6
Cooling Capacity (-5°℃)	kW	2.5	3.6	6.5
Cooling Capacity (-20 °C)	kW	1.0	1.6	2.8
Cooling Capacity (-35°C)	kW	0.1	0.4	0.6
Calorific value	kW	3.0	3.0	6.0
CompressorPower	kW	2.6	2.9	5.0
Circulation pump power	kW	0.8	0.8	1.5
Power Input	kW	6.4	6.7	12.5
Running Current	A	14.0	14.7	27.5
Power supply	1	3PH~380V~50Hz(Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control accuracy	℃		± 0.5
Rated flow rate	L/min	41	55	101
Pressure range	kPa	25～150	25～150	25～180
Condenser type	1	High	-efficiency water-cooled co	ndenser
Fuel tank volume	L	≥10	≥10	≥10
Cooling water flow	m³/h	1.9	2.5	4.5
Refrigeration inlet and outlet pipe diameter	Inch	1.2"	1.2"	1.2"
Cooling inlet and outlet pipe diameter	Inch	1.0"	1.0"	1.5"
Refrigerant	1		R404A
Weight	kg	300	350	420
Operating noise @1m	dB(A)		≤65
Size (LWH)	cm	5060150	6070150	7080180

【ACSM SERIES】 WATER CHILLER高低温一体智能温控机-60℃+100℃

ITEM	UNIT	ACSM04W06KW-60	ACSM06W09KW-60	ACSM08W12KW-60
Cooling Capacity (+20 °C ~+100°C )	kW	4.8	5.4	10.0
Cooling Capacity (-20 C)	kW	2.5	2.7	5.0
Cooling Capacity (-40 C)	kW	1.4	1.4	2.5
Cooling Capacity (-60 °C)	kW	0.5	0.7	1.6
Calorific value	kW	6.0	6.0	6.0
CompressorPower	kW	4.5	5.4	10.1
Circulation pump power	kW	0.4	0.8	1.5
Power Input	kW	10.9	12.2	17.6
Running Current	A	22.8	25.5	36.9
Power supply	1	3PH~380V~50Hz(Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control accuracy	℃		± 0.5
Rated flow rate	L/min	33	39	73
Pressure range	kPa	25～150	25～150	25～180
Condenser type	1	High-e	fficiency water-cooled cond	enser
Fuel tank volume	L	≥10	≥10	≥10
Cooling water flow	m³/h	2.0	2.5	4.6
Refrigeration inlet and outlet pipe diameter	Inch	3/4"	1.2"	1.2"
Cooling inlet and outlet pipe diameter	Inch	1.0"	1.0"	1.5"
Refrigerant	/		R404A、R23
Weight	kg	350	420	420
Operating noise @1m	dB(A)		≤65
Size (LWH)	cm	6070150	7080180	7080180

【ACSM SERIES】 WATER CHILLER高低温一体智能温控机-90℃+100℃

ITEM	UNIT	ACSM08W06KW-90	ACSM10W09KW-90	ACSM15W12KW-90
Cooling Capacity (+20 C ~+100 C)	kW	6.0	7.9	9.4
Cooling Capacity (-20 C)	kW	3.5	4.0	4.9
Cooling Capacity (-40 C)	kW	1.8	2.1	2.6
Cooling Capacity (-70 °C)	kW	1.1	1.3	1.7
Cooling Capacity (-90 °C)	kW	0.5	0.7	1.0
Calorific value	kW	6.0	9.0	12.0
CompressorPower	kW	10.1	11.2	13.1
Circulation pump power	kW	1.5	1.5	1.5
Power Input	kW	17.6	21.7	26.6
Running Current	A	35.1	43.4	53.1
Power supply	1	3PH~380V~50Hz(Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control accuracy	℃	± 0.5
Rated flow rate	L/min	35	40	50
Pressure range	kPa	25～180	25～300	25～300
Condenser type	1	High-efficiency water-cooled condenser
Fuel tank volume	L	≥10	≥20	≥20
Cooling water flow	m³/h	4.6	5.1	5.9
Refrigeration inlet and outlet pipe diameter	Inch	1.2"	1.2"	1.2"
Cooling inlet and outlet pipe diameter	Inch	1.5"	2.0"	2.0"
Refrigerant	1		R404A、R23 R14
Weight	kg	420	500	850
Operating noise @1m	dB(A)		≤65
Size (LWH)	cm	7080180	80120200	100120200

【ACSM SERIES】 DIRECT-COOLED CHILLER高低温一体智能温控机 -40℃-15℃

The direct-cooled Chiller is connected to the customer-side evaporator by piping, using the phase change of the refrigerant to absorb heat and cool the evaporator. Compared with liquid cooling, it has the advantage of greater heat flow density and is suitable for applications where a larger heat exchange volume can be achieved in a small volume

ITEM	UNIT	ACSM02D-40	ACSM03D-40	ACSM05D-40	ACSM10D-40	ACSM15D-40
Cooling Capacity (-40°C)	kW	0.9	1.2	2.1	4.2	5.6
CompressorPower	kW	2.6	2.9	5.0	8.2	14.0
Running Current	A	5.2	5.8	10.0	16.4	28.0
Power supply	1	3PH～380V〜50Hz (Customisable 220V)
Circulation medium	1	R404A、R507C
Temp control range	℃	-40~15
Temp control accuracy	℃	±1
CompressorType	1	Totally enclosed scroll type/semi-enclosed piston type
Throttle	1	Expansion valve
Operating method	1	Colour LCD touch screen
Safety Protection Device	1	Power reverse phase, motor overload, high and low voltage,over temperature protection, etc.
Communication method	1	Rs485, Modbus RTU

HIGH AND LOW TEMPERATUREINTEGRATED MACHINERY高低温一体智能温控机

The media side of the closed loop design, the system volume is small, fast rate of temperature rise and fall.

Support for a wide range of temperatures, high precision temperature control.

Intelligent PID algorithms, support for temperature control, automatic algorithm, fuzzy control and other functions.

Alarms and protections, safe and reliable operation.

Expansion tanks to maintain the normal temperature, do not participate in the medium circulation.

Refrigeration and heating output analog stepless adjustment.

ITEM	UNIT	ACH02W06KW-20	ACH03W09KW-20	ACH05W12KW-20	ACH10W24KW-20	ACH15W36KW-20
Cooling Capacity (+20°℃~+200°C)	kW	4.9	7.6	12.7	32.5	41.2
Cooling Capacity (-5°C)	kW	2.4	3.9	6.4	14.3	21.8
Cooling Capacity (-20°C)	kW	0.7	1.6	2.6	6.5	10.6
Calorific value	kW	6.0	9.0	12.0	24.0	36.0
CompressorPower	kW	2.3	2.9	4.7	9.5	14.5
Circulation pump power	kW	0.8	0.8	1.5	2.2	2.2
Power Input	kW	9.1	12.7	18.2	35.7	52.7
Running Current	A	18.1	25.4	36.4	71.4	105.4
Power supply	1	3PH~380V~50Hz(Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control accuracy	℃	±1
Rated flow rate	L/min	38	56	95	232	290
Pressure range	kPa	25~150	25~150	25~180	25~300	25~300
Condenser type	1		High-efficiency water-cooled condenser
Fuel tank volume	L	≥10	≥10	≥10	≥20	≥20
Cooling water flow	$\mathsf { m } ^ { 3 } / \mathsf { h }$	1.8	2.5	4.2	9.9	12.9
Communication method	1		Rs485, Modbus RTU
Refrigeration inlet and outlet pipediameter	Inch	$1 . 2 "$	$1 . 2 "$	$1 . 2 "$	$2 . 0 "$	2.0"
Cooling inlet and outlet pipe diameter	Inch	1.0"	$1 . 0 "$	1.5"	2.0"	2.0"
Refrigerant	1			R404A
Weight	kg	300	350	420	500	800
Operating noise @1m	dB(A)	≤80
Size(LWH)	cm	5060150	6070150	7080180	80120200	100120200

Depending on process requirements, the temperature range can be extended to -35-250°C if special customisation is required.

【ACH SERIES】高低温一体智能温控机

-60°℃/-90℃ + 2 0 0 ^ { \circ } C

ITEM	UNIT	ACH04W06KW-60	ACH08W12KW-60	ACH15W18KW-60	ACH08W06KW-90	ACH10W09KW-90	ACH15W12KW-90
Cooling Capacity(+200°℃)	kW	4.8	10.0	13.4	6.0	7.9	9.4
Cooling Capacity(+100°℃)	kW	4.8	10.0	13.4	6.0	7.9	9.4
Cooling Capacity(+50°℃)	kW	4.8	10.0	13.4	6.0	7.9	9.4
Cooling Capacity (+20°C)	kW	4.8	10.0	13.4	6.0	7.9	9.4
Cooling Capacity (-20°C)	kW	2.5	5.0	7.0	3.5	4.0	4.9
Cooling Capacity (-40°C)	kW	1.4	2.5	3.8	1.8	2.1	2.6
Cooling Capacity (-60°C)	kW	0.5	1.6	2.5	1.3	1.5	2.0
Cooling Capacity (-90°C)	1	1	1	1	0.5	0.7	1.0
Calorific value	kW	6.0	12.0	18.0	6.0	9.0	12.0
CompressorPower	kW	4.5	10.1	13.1	10.1	11.2	13.1
Circulation pump power	kW	0.4	1.5	1.5	1.5	1.5	1.5
Power Input	kW	10.9	23.6	32.6	17.6	21.7	26.6
Running Current	A	21.7	47.1	65.1	35.1	43.4	53.1
Power supply	1	3PH～380V~50Hz(Customisable 220V)
Circulation medium	1	Low-temperature silicone oil, fluorinated fluid, etc.
Temp control range	℃	-60~+200			-90~+200
Temp control accuracy	℃	±1
Rated flow rate	L/min	33	73	95	35	40	50
Pressure range	kPa	25~150	25~180	25~300	25~180	25~300	25~300
CompressorType	1	Semi-closed piston type
Circulation pump type	1	Stainless steel magnetic pumps
Throttle	1	Expansion valve
Evaporator type	1	High-efficiency stainless steel brazed plate
Condenser type	1	High-efficiency water-cooled condenser
Fuel tank volume	L	≥10	≥10	≥20	≥10	≥20	≥20
Cooling water flow	m³/h	2.0	4.6	5.9	4.6	5.1	5.9
Operating method	1	Colour LCD touch screen
Safety Protection Device	1	Power reverse phase, motor overload, high and low voltage,liquid level, over-temperature protection, etc.
Communication method	1	Rs485 ModbusRTU
Refrigeration inlet and outletpipe diameter	Inch	3/4″	1.2"	1.2"	1.2"	1.2"	1.2"
Cooling inlet and outlet pipediameter	Inch	1.0"	1.5"	2.0"	1.5"	2.0"	2.0"
Refrigerant	1		R404A、R23			R404A、R23、R14
Weight	kg	350	420	850	420	500	850
Operating noise @1m	dB(A)	≤80
Size (LWH)	cm	6070150	7080180	100120200	7080180	80120200	100120200

BOILER SERIES锅炉系列

Boiler series products include: oil (gas) organic heat carrier boiler, oil (gas) steam boiler, oil (gas) hot water boiler, electrically heated organic heat carrier boiler and so on.

THE MAIN PURPOSE OF THE PRODUCT

Chemical industry--Heating and cooling of reaction, distillation, melting, concentration, drying and other processes.

◆ Plastic industry - heating of extruder, bi-directional stretch film production line, heating moulding machine.

■ Rubber industry - heating of sulphurisation machine.

■ Corrugated industry - heating of corrugator, melting of wax.

Food industry - heating between cooking, drying and frying.

■ Asphalt industry - heating of melting equipment.

Electronic industry - lamination of copper foil substrate, glass fibre cloth impregnation machine, etc.

■ Paint and automotive industry - reaction of resin paint, drying of coating surface, lithium battery diaphragm.

■Synthetic fibre industry - heating of melt spinning machine.

TEMPERATURECONTROLEQUIPMENTSELECTION GUIDE

TEMPERATL

CONTENTS

JRE CONTROL

DCOV

ABOUT AODE关于奥德

AODE INDUSTRIAL TEMPERATURECONTROL EQUIPMENT PLATFORM奥德工业温控设备平台

INDUSTRIAL TEMPERATURECONTROL SYSTEM INTEGRATION工业温控装备系统集成

DCS INTELLIGENT CONTROL SYSTEMDCS智能控制系统

SOFTWARE ARCHITECTURE

HARDWARE ARCHITECTURE

HEATING UNIT SERIES制热系列

FEATURES

OPTICAL GRADE MOLD TEMPERATURECONTROL MACHINE光学级模具温度控制机 +25℃+160/180/200℃

STANDARD WATERTEMPERATURE CONTROL UNIT标准水温机 +25℃+100℃

STANDARD OILTEMPERATURE CONTROL UNIT标准油温机 +45℃+180℃

HIGH-TEMPERATURE WATERTEMPERATURE CONTROL UNIT高温水温机 +25℃+180℃

LARGE FLOW WATERTEMPERATURE CONTROL UNIT大流量水温机 +25℃+98℃

TEMPERATURE CONTROL UNIT TCU温控单元

TCU GLYCOL WATER SERIES -40℃+140℃

TCU HEAT TRANSFER OIL SERIES -80℃ +260℃

ELECTRIC HEATING ORGANIC HEATTRANSFER MATERIAL HEATER电加热导热油炉系列

电加热导热油炉 +25℃🔆+400℃

SPECIAL TMPERATURE CONTROLUNIT FOR EXTRUSION挤出专用温控单元 +25℃🔆 + 1 2 0 ^ { \circ } C

BWS HIGH-GLOSS STEAMMOLD TEMPERATURE CONTROL UNITBWS高光无痕模温控制机 +25℃+180℃

AFCH SERIES FAST HOT-COOLMOLD TEMPERATURE CONTROL UNITAFCH系列急冷急热模温控制机 +25℃+180℃

OIL TEMPERATURE CONTROL UNIT FOR DIE CASTING 320℃压铸专用油温机+45℃+320℃

FEATURES

WATER TEMPERATURE MACHINEFOR DIE CASTING180°C/200C压铸专用水温机 + 2 5 % + 2 0 0 ^ { \circ } \mathbb { C }

FEATURES

DIE-CASTING SPECIAL MULTI-CHANNELHIGH TEMPERATURE WATER TCU压铸专用多通道高温水温机 +25℃+180℃

FEATURES

CHILLER SERIES制冷系列

FEATURES

AIR COOLED INDUSTRIAL CHILLER风冷式工业冷水机 +7℃+25℃

WATER COOLED INDUSTRIAL CHILLER水冷式工业冷水机 +7℃+25℃

AIR COOLED SCREW CHILLER风冷螺杆冷水机 +7℃+25℃

WATER COOLED SCREW CHILLER水冷螺杆冷水机 +7℃+25℃

WATER COOLED LOWTEMPERATURE SCREW CHILLER水冷螺杆低温冷水机 \mathtt { 1 0 ^ { \circ } C } \ B0 ^ { \circ } \mathbb { C }

EVAPORATIVE LOW TEMPERATURE SCREW CHILLER 蒸发冷螺杆低温冷水机-10℃-30℃

CASCADE REFRIGERATING UNIT复叠式超低温机组 -70℃-100℃

WATER-COOLED AIR SUSPENSION CENTRIFUGAL CHILLER 水冷气悬浮离心式冷水机 +7℃ + 2 5 %

JET COOLER高压点冷机 +10℃ + 3 0 %

PURPOSE

FEATURES

HIGH PRESSURE DIE COOLER高压模冷机 +10℃+30℃

PURPOSE

FEATURES

MOULD COOLING STATION模具冷却站 +10℃+30℃

PURPOSE

FEATURES

HEATING AND COOLINGUNIT SERIES冷热一体系列

TESTING INDUSTRY ACT SERIES

MAIN FEATURES

【ACT SERIES】 INTELLIGENT HIGH ANDLOW LIQUID TEMPERATURE CONTROL DEVICE高低温液体智能温控设备 +5℃+100℃

【ACT SERIES】 INTELLIGENT HIGH ANDLOW LIQUID TEMPERATURE CONTROL DEVICE高低温液体智能温控设备 -35℃+100℃

【ACT SERIES】 INTELLIGENT HIGH ANDLOW LIQUID TEMPERATURE CONTROL DEVICE高低温液体智能温控设备 -40℃+100℃

【ACT SERIES】 ENERGY STORAGE LIQUIDCOOLING TEMPERATURE CONTROL ÉQUIPMENT储能液冷温控设备 + 5 % +25℃

HEATING AND COOLINGUNIT SERIES冷热一体系列

SEMICONDUCTOR INDUSTRY ACSM SERIES

MAIN FEATURES

【ACSM SERIES】 AIR CHILLER精密冷水机 +5℃+40℃

【ACSM SERIES】 WATER CHILLER

【ACSM SERIES】 AIR CHILLER高低温一体智能温控机 -20℃+100℃

【ACSM SERIES】 AIR CHILLER高低温一体智能温控机 -35℃+100℃

【ACSM SERIES】 AIR CHILLER高低温一体智能温控机-60℃+100℃

【ACSM SERIES】 AIR CHILLER高低温一体智能温控机 \mathfrak { s o c } 樂 + 1 0 0 ^ { \circ } \mathbb { C }

【ACSM SERIES】 WATER CHILLER高低温一体智能温控机 -20℃+100℃

【ACSM SERIES】 WATER CHILLER高低温一体智能温控机 -35℃+100℃

【ACSM SERIES】 WATER CHILLER高低温一体智能温控机-60℃+100℃

【ACSM SERIES】 WATER CHILLER高低温一体智能温控机-90℃+100℃

【ACSM SERIES】 DIRECT-COOLED CHILLER高低温一体智能温控机 -40℃-15℃

HIGH AND LOW TEMPERATUREINTEGRATED MACHINERY高低温一体智能温控机

【ACH SERIES】高低温一体智能温控机

BOILER SERIES锅炉系列

THE MAIN PURPOSE OF THE PRODUCT

快速跳转到指定页